Attachment 48822 Details for Bug 115321

console log

screenlog.0 (text/plain), 46.64 KB, created by Mihnea Istinie on 2005-09-05 15:41:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mihnea Istinie

Created: 2005-09-05 15:41:22 UTC

Size: 46.64 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/sdb6 vga=0x31a selinux=0 resume=/dev/sda5 splash=silent  showopts console=ttyS0,57600)
>Linux version 2.6.13-3-default (geeko@buildhost) (gcc version 4.0.2 20050826 (prerelease) (SUSE Linux)) #1 Mon Aug 29 19:48:23 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000fefffc00 - 00000000ff000000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>Nvidia board detected. Ignoring ACPI timer override.
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
>Checking aperture...
>CPU 0: aperture @ 9100000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>Built 1 zonelists
>Kernel command line: root=/dev/sdb6 vga=0x31a selinux=0 resume=/dev/sda5 splash=silent  showopts console=ttyS0,57600
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 2411.154 MHz processor.
>time.c: Using PIT/TSC based timekeeping.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Memory: 1023504k/1048512k available (2277k kernel code, 23996k reserved, 817k data, 176k init)
>Calibrating delay using timer specific routine.. 4827.39 BogoMIPS (lpj=9654780)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>mtrr: v2.0 (20020519)
>CPU: AMD Athlon(tm) 64 Processor 3800+ stepping 00
>checking if image is initramfs... it is
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>Using local APIC timer interrupts.
>Detected 12.558 MHz APIC timer.
>testing NMI watchdog ... OK.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Transparent bridge - 0000:00:09.0
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs<7>Losing some ticks... checking if CPU frequency changed.
> 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 3 of device 0000:05:00.0
>PCI: Bridge: 0000:00:09.0
>  IO window: d000-dfff
>  MEM window: fe900000-fe9fffff
>  PREFETCH window: fea00000-feafffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: c000-cfff
>  MEM window: fe800000-fe8fffff
>  PREFETCH window: fe700000-fe7fffff
>PCI: Bridge: 0000:00:0c.0
>  IO window: b000-bfff
>  MEM window: fe600000-fe6fffff
>  PREFETCH window: fe500000-fe5fffff
>PCI: Bridge: 0000:00:0d.0
>  IO window: a000-afff
>  MEM window: fe400000-fe4fffff
>  PREFETCH window: fe300000-fe3fffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: 9000-9fff
>  MEM window: f4000000-fbffffff
>  PREFETCH window: d0000000-dfffffff
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1125939522.804:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 10240k, total 131072k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112693 bytes,<6>...found (1280x1024, 17839 bytes, v3).
>Console: switching to colour frame buffer device 158x59
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 176k freed
>Trying manual resume from /dev/sda5
>Starting udev
>Creating devices
>Loading kernel/drivers/ide/ide-core.ko
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Loading kernel/drivers/ide/ide-disk.ko
>Loading kernel/drivers/scsi/scsi_mod.ko
>SCSI subsystem initialized
>Loading kernel/drivers/scsi/sd_mod.ko
>Loading kernel/drivers/ide/pci/amd74xx.ko
>logips2pp: Detected unknown logitech mouse model 1
>NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
>NFORCE-CK804: chipset revision 162
>NFORCE-CK804: not 100% native mode: will probe irqs later
>NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
>    ide0: BM-DMA at 0xfb00-0xfb07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xfb08-0xfb0f, BIOS settings: hdc:DMA, hdd:DMA
>input: PS/2 Logitech Mouse on isa0060/serio1
>udev[875]: main: action, subsystem or devpath missing
>hda: DVD-ROM BDV316C, ATAPI CD/DVD-ROM drive
>hdb: CD-RW BCE4012IM, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Loading kernel/drivers/scsi/libata.ko
>Loading kernel/drivers/scsi/sata_nv.ko
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
>ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF600 irq 217
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF608 irq 217
>ata1: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>ata1: dev 0 configured for UDMA/133
>scsi0 : sata_nv
>ata2: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>ata2: dev 0 configured for UDMA/133
>scsi1 : sata_nv
>  Vendor: ATA       Model: SAMSUNG SP1213C   Rev: SV10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sda: drive cache: write back
> sda:<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda1 sda2 <<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda5<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda6<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda7<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda8<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda9<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda10<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda11<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda12 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: ATA       Model: SAMSUNG SP1213C   Rev: SV10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>SCSI device sdb: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sdb: drive cache: write back
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>SCSI device sdb: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sdb: drive cache: write back
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>udev[954]: run_program: exec of program '/sbin/udev.mount.sh' failed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sdb:<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sdb1<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sdb2 <<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sdb5<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sdb6<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sdb7<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sdb8<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sdb9<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sdb10<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sdb11<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sdb12<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> >
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>udev[959]: run_program: exec of program '/sbin/udev.mount.sh' failed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>udev[964]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[965]: run_program: exec of program '/sbin/udev.mount.sh' failed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>udev[966]: run_program: exec of program '/sbin/udev.mount.sh' failed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>udev[967]: run_program: exec of program '/sbin/udev.mount.sh' failed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>udev[970]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[971]: run_program: exec of program '/sbin/udev.mount.sh' failed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>udev[976]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[977]: run_program: exec of program '/sbin/udev.mount.sh' failed
>Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
>Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
>ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xF100 irq 225
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xF108 irq 225
>udev[1010]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[1011]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[1012]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[1013]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[1014]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[1015]: run_program: exec of program '/sbin/udev.mount.sh' failed
>ata3: no device found (phy stat 00000000)
>scsi2 : sata_nv
>udev[1018]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[1019]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[1020]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[1021]: run_program: exec of program '/sbin/udev.mount.sh' failed
>ata4: no device found (phy stat 00000000)
>scsi3 : sata_nv
>Loading kernel/drivers/acpi/processor.ko
>ACPI: CPU0 (power states: C1[C1])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>Loading kernel/drivers/acpi/thermal.ko
>ACPI: Thermal Zone [THRM] (22 C)
>Loading kernel/drivers/acpi/fan.ko
>ACPI: Fan [FAN] (on)
>Waiting for deviAttempting manual resume
>ce /dev/sda5 to swsusp: Suspend partition has wrong signature?
>appear:  ok
>Loading kernel/fs/reiserfs/reiserfs.ko
>Waiting for device /dev/sdb6 to appear:  ok
>rootfs:  major=8 minor=22 devn=2070
>fsck 1.38 (30-Jun-2005)
>Reiserfs super block in block 16 on 0x816 of format 3.6 with standard journal
>Blocks (total/free): 2622592/1312845 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/sdb6' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>fsck succeeded. Mounting root device read-write.ReiserFS: sdb6: found reiserfs format "3.6" with standard journal
>
>Mounting root /dev/sdb6
>ReiserFS: sdb6: using ordered data mode
>ReiserFS: sdb6: journal params: device sdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sdb6: checking transaction log (sdb6)
>ReiserFS: sdb6: Using r5 hash to sort names
>.: Can't open /root/etc/sysconfig/hotplug
>
INIT: version 2.85 booting

>System Boot Control: Running /etc/init.d/boot
>Mounting /proc filesystem7[?25l
[80C[10D[1;32mdone[m8[?25h
>Mounting sysfs on /sys7[?25l
[80C[10D[1;32mdone[m8[?25h
>Mounting /dev/pts7[?25l
[80C[10D[1;32mdone[m8[?25h
>
Boot logging started on /dev/ttyS0(/dev/console) at Mon Sep  5 18:58:52 2005

>Mounting shared memory FS on /dev/shm
[80C[10D[1;32mdone[m

>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: invalid raid superblock magic on sda7
>md: sda7 has invalid sb, not importing!
>md: invalid raid superblock magic on sdb7
>md: sdb7 has invalid sb, not importing!
>md: autorun ...
>md: ... autorun DONE.
>Configuring serial ports...

>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A

>Configured serial ports

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hdevice-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>Starting udevd 7[?25l
[80C[10D[1;32mdone[m8[?25h

>Activating device mapper...

>Creating /dev/mapper/control character device with major:10 minor:63.

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>Scanning for LVM volume groups...

>  Reading all physical volumes.  This may take a while...

>  Found volume group "sles" using metadata type lvm2

>  Found volume group "target" using metadata type lvm2

>Activating LVM volume groups...

>  4 logical volume(s) in volume group "sles" now active

>  2 logical volume(s) in volume group "target" now active

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>Checking file systems...

>fsck 1.38 (30-Jun-2005)

>Checking all file systems.

>[/sbin/fsck.ext2 (1) -- /boot] fsck.ext2 -a /dev/sdb1

>/dev/sdb1: clean, 57/14056 files, 18327/56196 blocks

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hSetting up kernel module dependencies (if required)7[?25l
[80C[10D[1;32mdone[m8[?25h

>Mounting local file systems...

>proc on /proc type proc (rw)

>sysfs on /sys type sysfs (rw)

>tmpfs on /dev/shm type tmpfs (rw)

>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)

>/dev/sdb1 on /boot type ext2 (rw,acl,user_xattr)

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hLoading required kernel modules

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hSetting up the CMOS clock7[?25l
[80C[10D[1;32mdone[m8[?25h

>Creating /var/log/boot.msg

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hSetting up hostname 'linux'7[?25l
[80C[10D[1;32mdone[m8[?25h

>Setting up NIS domainname 'suse.de'7[?25l
[80C[10D[1;32mdone[m8[?25h

>Setting up loopback interface     lo

>    lo        IP address: 127.0.0.1/8

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>Restore device permissions7[?25l
[80C[10D[1;32mdone[m8[?25h

>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 233
>Adding 2104472k swap on /dev/sda5.  Priority:-1 extents:1
>Activating remaining swap-devices in /etc/fstab...

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hSetting current sysctl status from /etc/sysctl.conf

>net.ipv4.icmp_echo_ignore_broadcasts = 1

>net.ipv4.conf.all.rp_filter = 1

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>Enabling syn flood protection
[80C[10D[1;32mdone[m

>Disabling IP forwarding7[?25l
[80C[10D[1;32mdone[m8[?25h

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>/etc/init.d/boot.coldplug: line 18: /etc/sysconfig/hotplug: No such file or directory

>Coldplug

>Coldplug: cleaning /events hwup: Loading module 'forcedeth'  for device '0'

>eth0: forcedeth.c: subsystem: 01462:7125 bound to 0000:00:0a.0
>hwup: Loading module 'lp'  for device 'printer'

>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
> processing events7[?25l
[80C[10D[1;32mdone[m8[?25h

>^[usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 50
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 50, io mem 0xfebff000
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 217
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: irq 217, io mem 0xfebfe000
>ehci_hcd 0000:00:02.1: park 0
>ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Address64 -------- Resource unparsed
>shpchp: Address64 -------- Resource unparsed
>shpchp: Address64 -------- Resource unparsed
>ohci_hcd 0000:00:02.0: wakeup
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225
>usb 1-7: new full speed USB device using ohci_hcd and address 2
>intel8x0_measure_ac97_clock: measured 54679 usecs
>intel8x0: clocking to 46868
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 58
>PCI: Via IRQ fixup for 0000:01:08.0, from 5 to 10
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[58]  MMIO=[fe9ff000-fe9ff7ff]  Max Packet=[2048]
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>hda: ATAPI 1X DVD-ROM drive, 512kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdb: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>NET: Registered protocol family 23
>SigmaTel STIr4200 IRDA/USB found at address 2, Vendor: 66f, Product: 4200
>drivers/net/irda/stir4200.c: IrDA: Registered SigmaTel device irda0
>usbcore: registered new driver stir4200
>7[?25l
[80C[10D[1;32mdone[m8[?25h

>System Boot Control: The system has been 
[80C[10D[1mset up[m

>System Boot Control: Running /etc/init.d/boot.local

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h
INIT: Entering runlevel: 5

>bootsplash: status on console 0 changed to on
>
Boot logging started on /dev/ttyS0(/dev/console) at Mon Sep  5 16:59:07 2005

>Master Resource Control: previous runlevel: N, switching to runlevel: 
[80C[10D[1m5[m

>Starting irqbalance 7[?25l
[80C[10D[1;31mfailed[m8[?25h

>Starting syslog services7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting D-BUS daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Initializing random number generator7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting resource manager7[?25l
[80C[10D[1;32mdone[m8[?25h

>SubDomain: SubDomain (version 1.2-13.42r5011imnx_suse) initialized
>SubDomain: Control variable 'owlsm' changed to 0
>Starting SubDomain Event daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>NET: Registered protocol family 17
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>Loading keymap qwertz/de-latin1-nodeadkeys.map.gz

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hLoading compose table winkeys shiftctrl latin1.add7[?25l
[80C[10D[1;32mdone[m8[?25h

>Start Unicode mode

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hLoading console font lat9w-16.psfu  -m trivial G0:loadable

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hSetting up network interfaces:

>    lo

>    lo        IP address: 127.0.0.1/8

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h    irda0

>    irda0     configuration: usb-bus-usb

>    irda0     IP address: 192.168.11.1/24

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hWaiting for mandatory devices:  eth0

>19

>    eth0      device: nVidia Corporation CK804 Ethernet Controller (rev a3)

>    eth0      DHCP client (dhcpcd) is running

>    eth0      IP address: 10.10.2.160/16

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting mdnsd7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting RPC portmap daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Importing Net File System (NFS)
[80C[10D[1munused[m

>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>Loading SubDomain module 
[80C[10D[1;32mdone[m

>Mounting subdomainfs on /subdomain 
[80C[10D[1;32mdone[m

>Disabling OWLSM extension 
[80C[10D[1;32mdone[m

>Rebuilding certificate cache 
[80C[10D[1;32mdone[m

>Loading SubDomain profiles 
[80C[10D[1;32mdone[m

>pcc_acpi: module not supported by Novell, setting U taint flag.
>acpid: loading ACPI modules ( ac battery button ) 7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting acpid 7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting nfsboot (sm-notify) 7[?25l
[80C[10D[1;32mdone[m8[?25h

>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>Starting Name Service Cache Daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>microcode: CPU0 not a capable Intel processor
>microcode: No new microcode data for CPU0
>Checking/updating CPU microcode7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting service IrDA7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting SSH daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting service vocal:

>vocald requires configuration file /opt/vocal/etc/vocal.conf.  Quitting.

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>Mount SMB/ CIFS File Systems 
[80C[10D[1munused[m

>Starting ypbind7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting service automounter7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting service kdm7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting mail service (Postfix)7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting CRON daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting HAL daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting powersaved  (accessing ACPI events over acpid) 7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting service kdm7[?25l
[80C[10D[1;32mdone[m8[?25h

>Starting cupsd7[?25l
[80C[10D[1;32mdone[m8[?25h

>7[?25l
[80C[10D[1;32mdone[m8[?25h

>Master Resource Control: runlevel 5 has been 
[80C[10D[1mreached[m

>Failed services in runlevel 5: [80C[19D[1;31mirq_balancer[m

>Skipped services in runlevel 5: [80C[16D[1;33mnfs smbfs[m

>
INIT: 
INIT: Sending processes the TERM signal

>
Boot logging started on /dev/ttyS0(/dev/console) at Mon Sep  5 16:59:38 2005

>Master Resource Control: previous runlevel: 5, switching to runlevel: 
[80C[10D[1m6[m

>Shutting down service automountShutting down irqbalance 7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down mdnsd 7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down cupsd7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down service IrDA7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down Name Service Cache Daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Saving random seed7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down SubDomain Event daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Umount SMB/ CIFS File Systems 7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down service kdm7[?25l
[80C[10D[1;32mdone[m8[?25h

>/etc/init.d/kbd stop7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down SSH daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Unloading SubDomain profiles 
[80C[10D[1;32mdone[m

>Shutting down service vocal: 7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down service kdm7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down powersaved 7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down acpid 7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down HAL daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down CRON daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down D-BUS daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down resource manager7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down mail service (Postfix)7[?25l
[80C[10D[1;32mdone[m8[?25h

>
[80C[10D[1;32mdone[m

>Shutting down ypbind7[?25l
[80C[10D[1;32mdone[m8[?25h

>Remove Net File System (NFS)
[80C[10D[1munused[m

>Shutting down RPC portmap daemon7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down syslog services7[?25l
[80C[10D[1;32mdone[m8[?25h

>Shutting down network interfaces:

>    eth0      device: nVidia Corporation CK804 Ethernet Controller (rev a3)

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h    irda0

>    irda0     configuration: usb-bus-usb

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hShutting down service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .7[?25l
[80C[10D[1;32mdone[m8[?25h

>bootsplash: status on console 0 changed to on
>Running /etc/init.d/halt.local

>7[?25l[1A
[80C[10D[1;32mdone[m8[?25hSending all processes the TERM signal...

>[1A
[80C[10D[1;32mdone[m

>Sending all processes the KILL signal...
>[1A
[80C[10D[1;32mdone[m
>7[?25l
[80C[10D[1;32mdone[m8[?25h
>Turning off swap
>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h/etc/init.d/boot.d/K13boot.coldplug: line 18: /etc/sysconfig/hotplug: No such file or directory
>7[?25l
[80C[10D[1;32mdone[m8[?25h
>Restore device permissions7[?25l
[80C[10D[1;32mdone[m8[?25h
>Set Hardware Clock to the current System Time7[?25l
[80C[10D[1;32mdone[m8[?25h
>7[?25l
[80C[10D[1;32mdone[m8[?25h
>Unmounting file systems
>/dev/fd0 umounted
>none umounted
>/dev/sdb1 umounted
>devpts umounted
>tmpfs umounted
>sysfs umounted
>/dev/sdb6 umounted
>7[?25l[1A
[80C[10D[1;32mdone[m8[?25h7[?25l
[80C[10D[1;32mdone[m8[?25h
>proc umounted
>Please stand by while rebooting the system...
>md: stopping all md devices.
>md: md0 switched to read-only mode.
>Synchronizing SCSI cache for disk sdb: 
>Synchronizing SCSI cache for disk sda: 
>Restarting system.
>.
>machine restart
> __  __            _____  ___     __   _  _  ____   ___    _____ 
> \ \/ /___ _ __   |___ / / _ \   / /_ | || || ___| ( _ )  |___ / 
>  \  // _ \ '_ \    |_ \| | | | | '_ \| || ||___ \ / _ \ __ |_ \ 
>  /  \  __/ | | |  ___) | |_| | | (_) |__   _|__) | (_) |__|__) |
> /_/\_\___|_| |_| |____(_)___/___\___/   |_||____/ \___/  |____/ 
>                            |_____|                              
> http://www.cl.cam.ac.uk/netos/xen
> University of Cambridge Computer Laboratory
>
> Xen version 3.0_6458-3 (abuild@suse.de) (gcc version 4.0.2 20050826 (prerelease) (SUSE Linux)) Tue Aug 30 00:54:12 UTC 2005
> Latest ChangeSet:  
>
>(XEN) Physical RAM map:
>(XEN)  0000000000000000 - 000000000009f800 (usable)
>(XEN)  000000000009f800 - 00000000000a0000 (reserved)
>(XEN)  00000000000f0000 - 0000000000100000 (reserved)
>(XEN)  0000000000100000 - 000000003fff0000 (usable)
>(XEN)  000000003fff0000 - 000000003fff3000 (ACPI NVS)
>(XEN)  000000003fff3000 - 0000000040000000 (ACPI data)
>(XEN)  00000000e0000000 - 00000000f0000000 (reserved)
>(XEN)  00000000fec00000 - 00000000fec01000 (reserved)
>(XEN)  00000000fee00000 - 00000000fef00000 (reserved)
>(XEN)  00000000fefffc00 - 00000000ff000000 (reserved)
>(XEN)  00000000ffff0000 - 0000000100000000 (reserved)
>(XEN) System RAM: 1023MB (1048124kB)
>(XEN) Xen heap: 14MB (14712kB)
>(XEN) found SMP MP-table at 000f52f0
>(XEN) DMI 2.3 present.
>(XEN) Using APIC driver default
>(XEN) ACPI: RSDP (v000 Nvidia                                ) @ 0x00000000000f91b0
>(XEN) ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff3040
>(XEN) ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff30c0
>(XEN) ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff95c0
>(XEN) ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fff9500
>(XEN) ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
>(XEN) ACPI: Local APIC address 0xfee00000
>(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>(XEN) Processor #0 15:15 APIC version 16
>(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>(XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>(XEN) ACPI: IRQ0 used by override.
>(XEN) ACPI: IRQ2 used by override.
>(XEN) ACPI: IRQ9 used by override.
>(XEN) ACPI: IRQ14 used by override.
>(XEN) ACPI: IRQ15 used by override.
>(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
>(XEN) Using ACPI (MADT) for SMP configuration information
>(XEN) Initializing CPU#0
>(XEN) Detected 2411.141 MHz processor.
>(XEN) Using scheduler: Simple EDF Scheduler (sedf)
>(XEN) CPU0: AMD Flush Filter enabled
>(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>(XEN) CPU: L2 Cache: 512K (64 bytes/line)
>(XEN) CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 00
>(XEN) Total of 1 processors activated.
>(XEN) ENABLING IO-APIC IRQs
>(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
>(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
>(XEN) ...trying to set up timer (IRQ0) through the 8259A ...  failed.
>(XEN) ...trying to set up timer as Virtual Wire IRQ... failed.
>(XEN) ...trying to set up timer as ExtINT IRQ...spurious 8259A interrupt: IRQ7.
>(XEN)  works.
>(XEN) Platform timer is 1.193MHz PIT
>(XEN) Brought up 1 CPUs
>(XEN) mtrr: v2.0 (20020519)
>(XEN) *** LOADING DOMAIN 0 ***
>(XEN) DOM0 image is not a Xen-compatible Elf image.
>(XEN) 
>(XEN) ****************************************
>(XEN) Panic on CPU 0:
>(XEN) Could not set up DOM0 guest OS
>(XEN) ****************************************
>(XEN) 
>(XEN) Reboot in five seconds...

Actions: View

Attachments on bug 115321: 48822 | 48823