Attachment 49034 Details for Bug 114718

boot messages from console

boot_msg_rx300.txt (text/plain), 25.81 KB, created by Stephan Lauffer on 2005-09-07 11:13:48 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stephan Lauffer

Created: 2005-09-07 11:13:48 UTC

Size: 25.81 KB

patch

obsolete

>
>Linux version 2.6.13-3-smp (geeko@buildhost) (gcc version 4.0.2 20050826
>(prerelease) (SUSE Linux)) #1 SMP Mon Aug 29 19:48:23 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 0000000000099c00 (usable)
> BIOS-e820: 0000000000099c00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ca000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
> BIOS-e820: 000000007fef0000 - 000000007feff000 (ACPI data)
> BIOS-e820: 000000007feff000 - 000000007ff00000 (ACPI NVS)
> BIOS-e820: 000000007ff00000 - 0000000080000000 (usable)
> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
>1152MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6ab0
>DMI present.
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0xf008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x06] enabled)
>Processor #6 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
>Processor #7 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
>ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[16])
>IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 16-31
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>Enabling APIC mode:  Flat.  Using 2 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda7 vga=0x314 selinux=0    resume=/dev/sda6
>splash=silent showopts console=ttyS0 console=ttyS0,9600n8
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 2667.522 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2072064k/2097152k available (2318k kernel code, 23768k reserved, 737k
>data, 252k init, 1179584k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5338.77 BogoMIPS
>(lpj=10677559)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>mtrr: v2.0 (20020519)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1696k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>CPU0: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09
>Booting processor 1/0 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5334.14 BogoMIPS
>(lpj=10668297)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09
>Booting processor 2/1 eip 3000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5334.05 BogoMIPS
>(lpj=10668104)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU2: Thermal monitoring enabled
>CPU2: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09
>Booting processor 3/7 eip 3000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5334.01 BogoMIPS
>(lpj=10668023)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU3: Thermal monitoring enabled
>CPU3: Intel(R) Xeon(TM) CPU 2.66GHz stepping 09
>Total of 4 processors activated (21340.99 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>checking TSC synchronization across 4 CPUs: passed.
>Brought up 4 CPUs
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfda32, last bus=4
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIA] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIB] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIC] segment is 0
>ACPI: Assume root bridge [\_SB_.PCID] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKL] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKN] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKO] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: Device [ECP] status [00000008]: functional but not present; setting
>present
>ACPI: PCI Root Bridge [PCIA] (0000:01)
>PCI: Probing PCI hardware (bus 01)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIA] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIB] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIC] segment is 0
>ACPI: Assume root bridge [\_SB_.PCID] segment is 0
>ACPI: PCI Root Bridge [PCIB] (0000:02)
>PCI: Probing PCI hardware (bus 02)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIA] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIB] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIC] segment is 0
>ACPI: Assume root bridge [\_SB_.PCID] segment is 0
>ACPI: PCI Root Bridge [PCIC] (0000:03)
>PCI: Probing PCI hardware (bus 03)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIA] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIB] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIC] segment is 0
>ACPI: Assume root bridge [\_SB_.PCID] segment is 0
>ACPI: PCI Root Bridge [PCID] (0000:04)
>PCI: Probing PCI hardware (bus 04)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIA] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIB] segment is 0
>ACPI: Assume root bridge [\_SB_.PCIC] segment is 0
>ACPI: Assume root bridge [\_SB_.PCID] segment is 0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>Simple Boot Flag at 0x69 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1126091257.476:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xf7000000, mapped to 0xf8880000, using 3750k, total
>8128k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: protected mode interface info at c000:4c72
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>input: AT Translated Set 2 keyboard on isa0060/serio0
>NET: Registered protocol family 2
>logips2pp: Detected unknown logitech mouse model 1
>IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
>TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Starting balanced_irq
>Using IPI No-Shortcut mode
>ACPI wakeup devices:
>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
>PCI0  USB KEYB PS2M COM2 COM1 PCIA PCIB PCIC PCID
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 252k freed
>Trying manual resume from /dev/sda6
>Starting udev
>Creating devices
>Loading kernel/drivers/scsi/scsiSCSI subsystem initialized
>_mod.ko
>Loading kernel/dLoading Adaptec I2O RAID: Version 2.4 Build 5go
>rivers/scsi/sd_mDetecting Adaptec I2O RAID controllers...
>od.ko
>Loading kACPI: PCI Interrupt 0000:03:08.0[A] -> ernel/drivers/scGSI 24 (level,
>low) -> IRQ 169
>si/dpt_i2o.ko
>Adaptec I2O RAID controller 0 irq=169
>     BAR0 f8c80000 - size= 100000
>     BAR1 f8e00000 - size= 1000000
>dpti: If you have a lot of devices this could take a few minutes.
>dpti0: Reading the hardware resource table.
>TID 008  Vendor: ADAPTEC      Device: AIC-7902     Rev: 00000001
>TID 009  Vendor: ADAPTEC      Device: AIC-7902     Rev: 00000001
>TID 514  Vendor: SDR     G    Device: GEM318       Rev: 0
>TID 518  Vendor: ADAPTEC R    Device: RAID-1       Rev: FS13D
>scsi0 : Vendor: Adaptec  Model: 2010S            FW:FS13
>  Vendor: ADAPTEC   Model: RAID-1            Rev: FS13
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>SCSI device sda: 142131200 512-byte hdwr sectors (72771 MB)
>SCSI device sda: drive cache: write through
>SCSI device sda: 142131200 512-byte hdwr sectors (72771 MB)
>SCSI device sda: drive cache: write through
> sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: SDR       Model: GEM318            Rev: 0
>  Type:   Processor                          ANSI SCSI revision: 02
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>Attached scsi generic sg1 at scsi0, channel 0, id 8, lun 0,  type 3
>udev[935]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[938]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[939]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[940]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[941]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[942]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[943]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[944]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[947]: run_program: exec of program '/sbin/udev.mount.sh' failed
>Waiting for device /dev/sda6 to Attempting manual resume
>appear:  ok
>swsusp: Suspend partition has wrong signature?
>Loading kernel/fs/jbd/jbd.ko
>Loading kernel/fs/reiserfs/reiserfs.ko
>Waiting for device /dev/sda7 to appear:  ok
>rootfs:  major=8 minor=7 devn=2055
>fsck 1.38 (30-Jun-2005)
>Reiserfs super block in block 16 on 0x807 of format 3.6 with standard journal
>Blocks (total/free): 498000/384537 by 4096 bytes
>Filesystem is NOT clean
>Replaying journal..
>Trans replayed: mountid 36, transid 569, desc 6315, len 36, commit 6352, next
>trans offset 6335
>Trans replayed: mountid 36, transid 570, desc 6353, len 44, commit 6398, next
>trans offset 6381
>Trans replayed: mountid 36, transid 571, desc 6399, len 1, commit 6401, next
>trans offset 6384
>Trans replayed: mountid 36, transid 572, desc 6402, len 41, commit 6444, next
>trans offset 6427
>Trans replayed: mountid 36, transid 573, desc 6445, len 9, commit 6455, next
>trans offset 6438
>Trans replayed: mountid 36, transid 574, desc 6456, len 1, commit 6458, next
>trans offset 6441
>Trans replayed: mountid 36, transid 575, desc 6459, len 16, commit 6476, next
>trans offset 6459
>Trans replayed: mountid 36, transid 576, desc 6477, len 90, commit 6568, next
>trans offset 6551
>Trans replayed: mountid 36, transid 577, desc 6569, len 73, commit 6643, next
>trans offset 6626
>Trans replayed: mountid 36, transid 578, desc 6644, len 1, commit 6646, next
>trans offset 6629
>Trans replayed: mountid 36, transid 579, desc 6647, len 71, commit 6719, next
>trans offset 6702
>Reiserfs journal '/dev/sda7' in blocks [18..8211]: 11 transactions replayed
>Checking internal tree..finished
>fsck succeeded. Mounting root deReiserFS: sda7: found reiserfs format "3.6"
>with standard journal
>vice read-write.
>Mounting root /dev/sda7
>ReiserFS: sda7: using ordered data mode
>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block
>18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda7: checking transaction log (sda7)
>ReiserFS: sda7: Using r5 hash to sort names
>.: Can't open /root/etc/sysconfig/hotplug
>INIT: version 2.85 booting
>System Boot Control: Running /etc/init.d/boot
>Mounting /proc filesystem                                             done
>Mounting sysfs on /sys                                                done
>Mounting /dev/pts                                                     done
>Boot logging started on /dev/ttyS0(/dev/console) at Wed Sep  7 13:08:08 2005
>Mounting shared memory FS on /demd: Autodetecting RAID arrays.
>v/shm                                                                 md:
>autorun ...
>md: ... autorun DONE.
>
>Activating swap-devices in /etc/fstab...
>Adding 1992020k swap on /dev/sda6.  Priority:-1 extents:1             done
>Activating device mapper...
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>Creating /dev/mapper/control character device with major:10 minor:63.
>                                                                      done
>Checking file systems...
>fsck 1.38 (30-Jun-2005)
>Checking all file systems.
>[/sbin/fsck.ext2 (1) -- /boot] fsck.ext2 -a /dev/sda5
>/dev/sda5 was not cleanly unmounted, check forced.
>/dev/sda5: 38/66400 files (0.0% non-contiguous), 4542/132520 blocks
>[/sbin/fsck.reiserfs (1) -- /home] fsck.reiserfs -a /dev/sda11
>Reiserfs super block in block 16 on 0x80b of format 3.6 with standard journal
>Blocks (total/free): 2451904/2443611 by 4096 bytes
>Filesystem is NOT clean
>Replaying journal..
>Trans replayed: mountid 33, transid 90, desc 264, len 1, commit 266, next
>trans offset 249
>Trans replayed: mountid 33, transid 91, desc 267, len 1, commit 269, next
>trans offset 252
>Reiserfs journal '/dev/sda11' in blocks [18..8211]: 2 transactions replayed
>Checking internal tree..finished
>[/sbin/fsck.reiserfs (1) -- /opt] fsck.reiserfs -a /dev/sda9
>Reiserfs super block in block 16 on 0x809 of format 3.6 with standard journal
>Blocks (total/free): 985968/977147 by 4096 bytes
>Filesystem is NOT clean
>Replaying journal..
>Trans replayed: mountid 33, transid 108, desc 380, len 1, commit 382, next
>trans offset 365
>Trans replayed: mountid 33, transid 109, desc 383, len 1, commit 385, next
>trans offset 368
>Reiserfs journal '/dev/sda9' in blocks [18..8211]: 2 transactions replayed
>Checking internal tree..finished
>[/sbin/fsck.reiserfs (1) -- /srv] fsck.reiserfs -a /dev/sda12
>Reiserfs super block in block 16 on 0x80c of format 3.6 with standard journal
>Blocks (total/free): 8295552/8287087 by 4096 bytes
>Filesystem is NOT clean
>Replaying journal..
>Trans replayed: mountid 32, transid 79, desc 227, len 1, commit 229, next
>trans offset 212
>Trans replayed: mountid 32, transid 80, desc 230, len 1, commit 232, next
>trans offset 215
>Reiserfs journal '/dev/sda12' in blocks [18..8211]: 2 transactions replayed
>Checking internal tree..finished
>[/sbin/fsck.reiserfs (1) -- /tmp] fsck.reiserfs -a /dev/sda10
>Reiserfs super block in block 16 on 0x80a of format 3.6 with standard journal
>Blocks (total/free): 2451904/2443618 by 4096 bytes
>Filesystem is NOT clean
>Replaying journal..
>Trans replayed: mountid 33, transid 123, desc 421, len 2, commit 424, next
>trans offset 407
>Trans replayed: mountid 33, transid 124, desc 425, len 1, commit 427, next
>trans offset 410
>Reiserfs journal '/dev/sda10' in blocks [18..8211]: 2 transactions replayed
>Checking internal tree..finished
>[/sbin/fsck.reiserfs (1) -- /var] fsck.reiserfs -a /dev/sda8
>Reiserfs super block in block 16 on 0x808 of format 3.6 with standard journal
>Blocks (total/free): 2451904/2436848 by 4096 bytes
>Filesystem is NOT clean
>Replaying journal..
>Trans replayed: mountid 34, transid 610, desc 4975, len 19, commit 4995, next
>trans offset 4978
>Trans replayed: mountid 34, transid 611, desc 4996, len 1, commit 4998, next
>trans offset 4981
>Trans replayed: mountid 34, transid 612, desc 4999, len 5, commit 5005, next
>trans offset 4988
>Trans replayed: mountid 34, transid 613, desc 5006, len 13, commit 5020, next
>trans offset 5003
>Trans replayed: mountid 34, transid 614, desc 5021, len 8, commit 5030, next
>trans offset 5013
>Reiserfs journal '/dev/sda8' in blocks [18..8211]: 5 transactions replayed
>Checking internal tree..finished                                      done
>Setting up kernel module dependencies (if required)                   done
>ReiserFS: sda11: found reiserfs format "3.6" with standard journal
>
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>tmpfs on /dev/shm type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda5 on /boot type ext2 (rw,acl,user_xattr)
>ReiserFS: sda11: using ordered data mode
>ReiserFS: sda11: journal params: device sda11, size 8192, journal first block
>18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda11: checking transaction log (sda11)
>ReiserFS: sda11: Using r5 hash to sort names
>/dev/sda11 on /home type reiserfs (rw,acl,user_xReiserFS: sda9: found reiserfs
>format "3.6" with standard journal
>attr)
>ReiserFS: sda9: using ordered data mode
>ReiserFS: sda9: journal params: device sda9, size 8192, journal first block
>18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda9: checking transaction log (sda9)
>ReiserFS: sda9: Using r5 hash to sort names
>/dev/sda9 on /opt type reiserfs (rw,acl,user_xatReiserFS: sda12: found
>reiserfs format "3.6" with standard journal
>tr)
>ReiserFS: sda12: using ordered data mode
>ReiserFS: sda12: journal params: device sda12, size 8192, journal first block
>18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda12: checking transaction log (sda12)
>ReiserFS: sda12: Using r5 hash to sort names
>/dev/sda12 on /srv type reiserfs (rw,acl,user_xattr)
>ReiserFS: sda10: found reiserfs format "3.6" with standard journal
>ReiserFS: sda10: using ordered data mode
>ReiserFS: sda10: journal params: device sda10, size 8192, journal first block
>18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda10: checking transaction log (sda10)
>ReiserFS: sda10: Using r5 hash to sort names
>/dev/sda10 on /tmp type reiserfs (rw,acl,user_xaReiserFS: sda8: found reiserfs
>format "3.6" with standard journal
>ttr)
>ReiserFS: sda8: using ordered data mode
>ReiserFS: sda8: journal params: device sda8, size 8192, journal first block
>18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda8: checking transaction log (sda8)
>ReiserFS: sda8: Using r5 hash to sort names
>/dev/sda8 on /var type reiserfs (rw,acl,user_xattr)                   done
>Setting up the CMOS clockparport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>lp0: using parport0 (interrupt-driven).
>                                                                      done
>Starting udevd                                                        done
>Loading required kernel modules                                       done
>Setting up hostname 'frltzy0z'                                        done
>Setting up loopback interface     lo
>    lo        IP address: 127.0.0.1/8
>                                                                      done
>/etc/init.d/boot.coldplug: line 18: /etc/sysconfig/hotplug: No such file or
>directory
>Coldplug
>Coldplug: cleaning /events hwup: Loading module 'lp'  for device 'printer'
> processing events                                                    done
>Creating /var/log/boot.msg                                            done
>Restore device permissions                                            done
>INIT: Entering runlevel: 2
>Boot logging started on /dev/ttyS0(/dev/console) at Wed Sep  7 13:08:30 2005
>Master Resource Control: previous runlevel: N, switching to runlevel: 2
>Initializing random number generator                                  done
>Linux agpgart interface v0.101 (c) Dave Jones
>tpm: module not supported by Novell, setting U taint flag.
>tpm_atmel: module Starting resource manager                           done
>t supported by Novell, setting U taint flag.
>sworks_agp: Unknown symbol agp_bridge
>sworks_agp: Unknown symbol global_cache_flush
>sworks_agp: Unknown symbol agp_device_command
>sworks_agp: Unknown symbol agp_generic_destroy_page
>sworks_agp: Unknown symbol agp_off
>sworks_agp: Unknown symbol agp_remove_bridge
>sworks_agp: Unknown symbol agp_generic_mask_memory
>sworks_agp: Unknown symbol agp_generic_alloc_by_type
>sworks_agp: Unknown symbol agp_generic_free_by_type
>sworks_agp: Unknown symbol agp_collect_device_status
>sworks_agp: Unknown symbol agp_alloc_bridge
>sworks_agp: Unknown symbol agp_add_bridge
>sworks_agp: Unknown symbol agp_generic_alloc_page
>sworks_agp: Unknown symbol agp_put_bridge
>sworks_agp: Unknown symbol agp_bridge
>sworks_agp: Unknown symbol global_cache_flush
>sworks_agp: Unknown symbol agp_device_command
>sworks_agp: Unknown symbol agp_generic_destroy_page
>sworks_agp: Unknown symbol agp_off
>sworks_agp: Unknown symbol agp_remove_bridge
>sworks_agp: Unknown symbol agp_generic_mask_memory
>sworks_agp: Unknown symbol agp_generic_alloc_by_type
>sworks_agp: Unknown symbol agp_generic_free_by_type
>sworks_agp: Unknown symbol agp_collect_device_status
>sworks_agp: Unknown symbol agp_alloc_bridge
>sworks_agp: Unknown symbol agp_add_bridge
>sworks_agp: Unknown symbol agp_generic_alloc_page
>sworks_agp: Unknown symbol agp_put_bridge
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
>piix4_smbus 0000:00:0f.0: Unusual config register value
>piix4_smbus 0000:00:0f.0: Try using fix_hstcfg=1 if you experience problems
>piix4_smbus 0000:00:0f.0: Illegal Interrupt configuration (or code out of
>date)!
>ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LNKU] -> GSI 11 (level, low) ->
>IRQ 11
>ohci_hcd 0000:00:0f.2: OHCI Host Controller
>ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0f.2: irq 11, io mem 0xf6001000
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI
>Copyright (c) 1999-2005 Intel Corporation.
>ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 20 (level, low) -> IRQ 177
>I2O subsystem v1.288
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>i2o: max drivers = 8
>i2o: Checking for PCI I2O controllers...
>ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 24 (level, low) -> IRQ 169
>iop0: controller found (0000:03:08.0)
>PCI: Unable to reserve mem region #1:100000@f8400000 for device 0000:03:08.0
>iop0: device already claimed
>iop0: DMA / IO allocation for I2O controller  failed
>ACPI: PCI interrupt for device 0000:03:08.0 disabled
>SvrWks CSB6: IDE controller at PCI slot 0000:00:0f.1
>SvrWks CSB6: chipset revision 160
>SvrWks CSB6: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:DMA, hdd:pio
>hda: LITE-ON COMBO LTC-48161H, ATAPI CD/DVD-ROM drive
>Setting up network interfaces:
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hdc: JLMS XJ-SD081D, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>dpti0: Trying to Abort cmd=10945
>
>

Actions: View

Attachments on bug 114718: 49034 | 49045