Attachment 49281 Details for Bug 104647

dmesg output

dmesg.log (text/x-log), 18.32 KB, created by Jörg Mayer on 2005-09-08 22:07:50 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jörg Mayer

Created: 2005-09-08 22:07:50 UTC

Size: 18.32 KB

patch

obsolete

>Linux version 2.6.13-20050906125922-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 6 12:59:22 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
> BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
> BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>On node 0 totalpages: 262096
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32720 pages, LIFO batch:15
>DMI 2.3 present.
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f80d0
>ACPI: RSDT (v001 A M I  OEMRSDT  0x07000529 MSFT 0x00000097) @ 0x3ffd0000
>ACPI: FADT (v002 A M I  OEMFACP  0x07000529 MSFT 0x00000097) @ 0x3ffd0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x07000529 MSFT 0x00000097) @ 0x3ffd0390
>ACPI: MCFG (v001 A M I  OEMMCFG  0x07000529 MSFT 0x00000097) @ 0x3ffd03f0
>ACPI: OEMB (v001 A M I  AMI_OEM  0x07000529 MSFT 0x00000097) @ 0x3ffde040
>ACPI: MCFG (v001 A M I  OEMMCFG  0x07000529 MSFT 0x00000097) @ 0x3ffd4e60
>ACPI: SSDT (v001    AMI   CPU1PM 0x00000001 INTL 0x02002026) @ 0x3ffd4ea0
>ACPI: DSDT (v001 UW____ F19_____ 0x00000001 INTL 0x02002026) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: local apic disabled
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: TEMPLATE Product ID: ETEMPLATE    APIC at: 0xFEE00000
>Processor #0 6:13 APIC version 20
>I/O APIC #1 Version 32 at 0xFEC00000.
>Processors: 1
>Allocating PCI resources starting at 40000000 (gap: 40000000:bed13000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda6 vga=0x0317 selinux=0    resume=/dev/sda5  splash=verbose
>bootsplash: verbose mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 2000.429 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1033432k/1048384k available (2029k kernel code, 14084k reserved, 695k data, 204k init, 130880k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4004.32 BogoMIPS (lpj=8008648)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1693k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0c28)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
>ACPI: 2 duplicate MCFG table ignored.
>PCI: Using MMCONFIG
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:03:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: Embedded Controller [EC0] (gpe 24)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
>PCI: Bridge: 0000:00:01.0
>  IO window: b000-dfff
>  MEM window: ffd00000-ffdfffff
>  PREFETCH window: cfe00000-dfefffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: bfc00000-bfcfffff
>  PREFETCH window: bfd00000-bfdfffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 9000-afff
>  MEM window: ffc00000-ffcfffff
>  PREFETCH window: 40000000-400fffff
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1126223889.524:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>Allocate Port Service[pcie03]
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 16384k
>vesafb: mode is 1024x768x16, linelength=2048, pages=9
>vesafb: protected mode interface info at c000:ae9e
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76167 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.0.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>P0P1  LAN  AZC P0P5 P0P6 P0P7 P0P3 P0P2 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ICH6: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>ICH6: chipset revision 4
>ICH6: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: HL-DT-ST DVD-RW GCA-4080N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>libata version 1.12 loaded.
>sata_via version 1.1
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>sata_via(0000:01:07.0): routed to hard irq line 10
>ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xAC0A bmdma 0xA400 irq 10
>ata2: SATA max UDMA/133 cmd 0xA880 ctl 0xA88A bmdma 0xA408 irq 10
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
>input: SynPS/2 Synaptics TouchPad on isa0060/serio2
>ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:6003 85:3c69 86:3e01 87:6003 88:80ff
>ata1: dev 0 ATA, max UDMA7, 156301488 sectors: lba48
>ata1: dev 0 configured for UDMA/133
>scsi0 : sata_via
>ata2: no device found (phy stat 00000000)
>scsi1 : sata_via
>  Vendor: ATA       Model: SAMSUNG HM080JI   Rev: YC10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (55 C)
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>udev[935]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[936]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[937]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[938]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[939]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[940]: run_program: exec of program '/sbin/udev.mount.sh' failed
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>udev[1779]: run_program: open /dev/null failed
>udev[1779]: run_program: exec of program '/etc/hotplug.d/input_device/50-input_device.hotplug' failed
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 2064312k swap on /dev/sda5.  Priority:-1 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>NTFS driver 2.1.23 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (8190 buckets, 65520 max) - 248 bytes per conntrack
>lp: driver loaded but no devices found
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e480
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 3, io base 0x0000e800
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000e880
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 10, io base 0x0000ec00
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hw_random: RNG not detected
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xffeffc00
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>r8169 Gigabit Ethernet driver 2.2LK loaded
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>eth0: Identified chip type is 'RTL8169s/8110s'.
>eth0: RTL8169 at 0xf92c6c00, 00:03:0d:30:a9:75, IRQ 3
>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'NULL'
>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
>i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0)
>tpm: module not supported by Novell, setting U taint flag.
>tpm_nsc: module not supported by Novell, setting U taint flag.
>tpm_infineon: module not supported by Novell, setting U taint flag.
>tpm_inf 0000:00:1f.0: LPC-bus found at 0x2641
>tpm_inf: probe of 0000:00:1f.0 failed with error -5
>ieee80211: module not supported by Novell, setting U taint flag.
>ieee80211: 802.11 data/management/control stack, 1.0.3
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[ffcff000-ffcff7ff]  Max Packet=[2048]
>ipw2200: module not supported by Novell, setting U taint flag.
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ipw2200: Radio Frequency Kill Switch is On:
>Kill switch must be turned off for wireless networking to work.
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d4971e182b8]
>hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>NET: Registered protocol family 17
>r8169: eth0: link up
>eth1: no IPv6 routers present
>eth0: no IPv6 routers present
>ACPI: AC Adapter [AC0] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Power Button (CM) [PWRB]
>pcc_acpi: module not supported by Novell, setting U taint flag.
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>    ACPI-0141: *** Warning: Table CPU1PM has already been loaded (not bad)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>usbcore: registered new driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
>usbcore: registered new driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.15 DST=224.0.0.251 LEN=106 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=86 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.15 DST=224.0.0.251 LEN=106 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=86 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.15 DST=224.0.0.251 LEN=106 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=86 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.15 DST=224.0.0.251 LEN=106 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=86

Actions: View

Attachments on bug 104647: 48149 | 48150 | 48151 | 48153 | 48154 | 48155 | 48189 | 49281