Attachment 49409 Details for Bug 116138

dmesg-cfq-oops.txt

dmesg-cfq-oops.txt (text/plain), 24.70 KB, created by Olaf Hering on 2005-09-09 14:14:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Olaf Hering

Created: 2005-09-09 14:14:03 UTC

Size: 24.70 KB

patch

obsolete

>Total memory = 640MB; using 2048kB for hash table (at c0600000)
>Linux version 2.6.13-20050909092803-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Fri Sep 9 09:28:03 UTC 2005
>Found UniNorth memory controller & host bridge, revision: 210
>Mapped at 0xfdfc0000
>Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
>Processor NAP mode on idle enabled.
>PowerMac motherboard: iBook G4
>Found UniNorth PCI host bridge at 0xf0000000. Firmware bus number: 0->0
>Found UniNorth PCI host bridge at 0xf2000000. Firmware bus number: 0->0
>Found UniNorth PCI host bridge at 0xf4000000. Firmware bus number: 0->0
>via-pmu: Server Mode is disabled
>PMU driver 2 initialized for Core99, firmware: 0c
>nvram: Checking bank 0...
>nvram: gen0=526, gen1=527
>nvram: Active bank is: 1
>nvram: OF partition at 0x410
>nvram: XP partition at 0x1020
>nvram: NR partition at 0x1120
>On node 0 totalpages: 163840
>  DMA zone: 163840 pages, LIFO batch:31
>  Normal zone: 0 pages, LIFO batch:1
>  HighMem zone: 0 pages, LIFO batch:1
>Built 1 zonelists
>Kernel command line: root=LABEL=sbp2_root quiet sysrq=1 
>PowerMac using OpenPIC irq controller at 0x80040000
>OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at fc6ef000
>OpenPIC timer frequency is 4.166666 MHz
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>GMT Delta read from XPRAM: 0 minutes, DST: off
>time_init: decrementer frequency = 18.432000 MHz
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 640640k available (2828k kernel code, 1640k data, 188k init, 0k highmem)
>AGP special page: 0xe7fff000
>Calibrating delay loop... 761.85 BogoMIPS (lpj=380928)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>device-tree: property "l2-cache" name conflicts with node in /cpus/PowerPC,G4@0
>checking if image is initramfs... it is
>Freeing initrd memory: 1464k freed
>NET: Registered protocol family 16
>PCI: Probing PCI hardware
>PCI: Cannot allocate resource region 0 of device 0001:10:18.0
>PCI: Cannot allocate resource region 0 of device 0001:10:19.0
>Apple USB OHCI 0001:10:18.0 disabled by firmware
>Apple USB OHCI 0001:10:19.0 disabled by firmware
>Registering openpic with sysfs...
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>Thermal assist unit not available
>Registering PowerMac CPU frequency driver
>Low: 757 Mhz, High: 998 Mhz, Boot: 757 Mhz
>audit: initializing netlink socket (disabled)
>audit(1126275210.495:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>PCI: Enabling device 0000:00:10.0 (0006 -> 0007)
>radeonfb (0000:00:10.0): Invalid ROM signature 0 should be0xaa55
>radeonfb: Retreived PLL infos from Open Firmware
>radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=190.00 Mhz, System=183.00 MHz
>radeonfb: PLL min 12000 max 35000
>radeonfb: Monitor 1 type LCD found
>radeonfb: EDID probed
>radeonfb: Monitor 2 type no found
>radeonfb: Using Firmware dividers 0x000600ad from PPLL 0
>radeonfb: Dynamic Clock Power Management enabled
>Console: switching to colour frame buffer device 128x48
>Registered "mnca" backlight controller,level: 15/15
>radeonfb (0000:00:10.0): ATI Radeon \c 
>isapnp: ISA Plug & Play support disabled
>Generic RTC Driver v1.07
>Macintosh non-volatile memory driver v1.1
>serial8250_init: nothing to do on this board
>pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
>ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
>ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 123456K size 1024 blocksize
>loop: loaded (max 8 devices)
>MacIO PCI driver attached to Intrepid chipset
>input: Macintosh mouse button emulation
>apm_emu: APM Emulation 0.5 initialized.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>adb: starting probe task...
>PCI: Enabling device 0002:20:0d.0 (0000 -> 0002)
>adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f
>ADB keyboard at 2, handler 1
>Detected ADB keyboard, type ISO, swapping keys.
>input: ADB keyboard on adb2:2.c4/input
>input: ADB Powerbook buttons on adb7:7.1f/input
>ADB mouse at 3, handler set to 4 (trackpad)
>input: ADB mouse on adb3:3.01/input
>adb: finished probe task...
>ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39
>Probing IDE interface ide0...
>hda: FUJITSU MHT2060AT, ATA DISK drive
>hda: Enabling Ultra DMA 5
>ide0 at 0xe902a000-0xe902a007,0xe902a160 on irq 39
>ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24
>Probing IDE interface ide1...
>hdc: MATSHITACD-RW CW-8123, ATAPI CD/DVD-ROM drive
>hdc: Enabling MultiWord DMA 2
>ide1 at 0xe901a000-0xe901a007,0xe901a160 on irq 24
>hda: max request size: 1024KiB
>hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8 hda9
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>Apple USB OHCI 0001:10:18.0 disabled by firmware
>Apple USB OHCI 0001:10:19.0 disabled by firmware
>PCI: Enabling device 0001:10:1a.0 (0000 -> 0002)
>ohci_hcd 0001:10:1a.0: OHCI Host Controller
>ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
>ohci_hcd 0001:10:1b.0: OHCI Host Controller
>ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
>ohci_hcd 0001:10:1b.1: OHCI Host Controller
>ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>TCP westwood registered
>TCP htcp registered
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 188k init 4k chrp 32k prep
>SCSI subsystem initialized
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>PCI: Enabling device 0002:20:0e.0 (0000 -> 0002)
>ohci1394: fw-host0: Unexpected PCI resource length of 1000!
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[40]  MMIO=[f5000000-f50007ff]  Max Packet=[2048]
>sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
>ieee1394: Node added: ID:BUS[0-00:1023]  GUID[0001d20000038f29]
>ieee1394: Host added: ID:BUS[0-01:1023]  GUID[000a95fffeaa0cfa]
>scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
>ieee1394: sbp2: Logged into SBP-2 device
>ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
>  Vendor: Maxtor 9  Model: 0648D3            Rev:     
>  Type:   Direct-Access                      ANSI SCSI revision: 06
>SCSI device sda: 12656448 512-byte hdwr sectors (6480 MB)
>sda: asking for cache data failed
>sda: assuming drive cache: write through
>SCSI device sda: 12656448 512-byte hdwr sectors (6480 MB)
>sda: asking for cache data failed
>sda: assuming drive cache: write through
> sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 190336k swap on /dev/sda8.  Priority:-1 extents:1
>EXT3 FS on sda11, internal journal
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>Found KeyWest i2c on "uni-n", 2 channels, stepping: 4 bits
>Found KeyWest i2c on "mac-io", 1 channel, stepping: 4 bits
>lp: driver loaded but no devices found
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected Apple UniNorth 2 chipset
>agpgart: configuring for size idx: 4
>agpgart: AGP aperture is 16M @ 0x0
>PCI: Enabling device 0001:10:1b.2 (0004 -> 0006)
>ehci_hcd 0001:10:1b.2: EHCI Host Controller
>ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4
>ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
>ehci_hcd 0001:10:1b.2: park 0
>ehci_hcd 0001:10:1b.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 5 ports detected
>sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
>PHY ID: 4061e4, addr: 0
>eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:aa:0c:fa 
>eth0: Found BCM5221 PHY
>eth0: Link is up at 100 Mbps, full-duplex.
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
>Uniform CD-ROM driver Revision: 3.20
>hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
>hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>ide: failed opcode was: unknown
>eth0: Link is up at 100 Mbps, full-duplex.
>eth0: Pause is disabled
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c034af08(lo)
>IPv6 over IPv4 tunneling driver
>subfs 0.9
>[drm] Initialized drm 1.0.0 20040925
>[drm] Initialized radeon 1.16.0 20050311 on minor 0: 
>agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
>agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
>[drm] Loading R200 Microcode
>ISO 9660 Extensions: RRIP_1991A
>UDF-fs: No VRS found
>ISO 9660 Extensions: RRIP_1991A
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: unsolicited response packet received - no tlabel match
>usb 4-2: new high speed USB device using ehci_hcd and address 2
>Initializing USB Mass Storage driver...
>scsi1 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor: Apple     Model: iPod              Rev: 1.62
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sdb: 39063023 512-byte hdwr sectors (20000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 64 00 00 08
>sdb: assuming drive cache: write through
>SCSI device sdb: 39063023 512-byte hdwr sectors (20000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 64 00 00 08
>sdb: assuming drive cache: write through
> sdb: [mac] sdb1 sdb2 sdb3
>Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0
>Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
>usb-storage: device scan complete
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>adt746x: version 1 (supported)
>adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
>sensor 0: PWR/MEMORY BOTTOMSIDE
>sensor 1: CPU BOTTOMSIDE
>sensor 2: GPU ON DIE
>adt746x: ADT7467 initializing
>adt746x: Lowering max temperatures from 69, 92, 101 to 70, 50, 70
>adt746x: Setting speed to 0 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 64 (limit exceeded by 0 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 64 (limit exceeded by 0 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 226 (limit exceeded by 7 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 226 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 64 (limit exceeded by 1 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 255 (limit exceeded by 9 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 255 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 172 (limit exceeded by 5 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 172 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 226 (limit exceeded by 7 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 226 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 255 (limit exceeded by 9 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 255 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 118 (limit exceeded by 3 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 118 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 226 (limit exceeded by 7 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 226 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 91 (limit exceeded by 2 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 91 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 172 (limit exceeded by 5 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 172 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 118 (limit exceeded by 3 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 118 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 172 (limit exceeded by 5 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 172 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 118 (limit exceeded by 3 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 118 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 172 (limit exceeded by 5 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 172 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 118 (limit exceeded by 3 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 118 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 64 (limit exceeded by 1 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 118 (limit exceeded by 3 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 118 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 172 (limit exceeded by 5 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 172 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 91 (limit exceeded by 2 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 91 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 91 (limit exceeded by 2 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 91 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 64 (limit exceeded by 0 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>adt746x: setting fans speed to 91 (limit exceeded by 2 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 91 for CPU BOTTOMSIDE fan.
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>ieee1394: unsolicited response packet received - no tlabel match
>adt746x: setting fans speed to 64 (limit exceeded by 0 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 91 (limit exceeded by 2 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 91 for CPU BOTTOMSIDE fan.
>usb 4-2: reset high speed USB device using ehci_hcd and address 2
>usb 4-2: reset high speed USB device using ehci_hcd and address 2
>usb 4-2: reset high speed USB device using ehci_hcd and address 2
>usb 4-2: reset high speed USB device using ehci_hcd and address 2
>usb 4-2: reset high speed USB device using ehci_hcd and address 2
>scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0
>scsi1 (0:0): rejecting I/O to offline device
>usb 4-2: USB disconnect, address 2
>adt746x: setting fans speed to 64 (limit exceeded by 0 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>usb 4-2: new high speed USB device using ehci_hcd and address 3
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>  Vendor: Apple     Model: iPod              Rev: 1.62
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sdb: 39063023 512-byte hdwr sectors (20000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 64 00 00 08
>sdb: assuming drive cache: write through
>SCSI device sdb: 39063023 512-byte hdwr sectors (20000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 64 00 00 08
>sdb: assuming drive cache: write through
> sdb: [mac] sdb1 sdb2 sdb3
>Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 0
>Attached scsi generic sg1 at scsi2, channel 0, id 0, lun 0,  type 0
>usb-storage: device scan complete
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>adt746x: setting fans speed to 91 (limit exceeded by 2 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 91 for CPU BOTTOMSIDE fan.
>HFS+-fs warning: Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended.  mounting read-only.
>adt746x: setting fans speed to 64 (limit exceeded by 0 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>usb 4-2: USB disconnect, address 3
>adt746x: Stopping fans.
>adt746x: Setting speed to 0 for CPU BOTTOMSIDE fan.
>Oops: kernel access of bad area, sig: 11 [#1]
>NIP: C01EB2B4 LR: C002A8EC SP: E7D0FF60 REGS: e7d0feb0 TRAP: 0300    Not tainted
>MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
>DAR: 00000004, DSISR: 40000000
>TASK = e7c331e0[101] 'kblockd/0' THREAD: e7d0e000
>Last syscall: -1 
>GPR00: C002A8EC E7D0FF60 E7C331E0 C41F9DFC E7D0FF80 00000001 00000000 E7D0FF8C 
>GPR08: C1B58D88 00000000 00000000 FFFFFFFF 00000000 00000000 00000000 00000000 
>GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
>GPR24: 00000000 0048B6EC 41400000 C0D23F0C 00000000 00009032 C1B58D88 C41F9DFC 
>NIP [c01eb2b4] cfq_kick_queue+0x18/0xa4
>LR [c002a8ec] worker_thread+0x184/0x204
>Call trace:
> [c002a8ec] worker_thread+0x184/0x204
> [c002f6d4] kthread+0xc4/0x100
> [c0007154] kernel_thread+0x44/0x60
>adt746x: setting fans speed to 91 (limit exceeded by 2 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 91 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 145 (limit exceeded by 4 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 145 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 253 (limit exceeded by 8 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 253 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 199 (limit exceeded by 6 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 199 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 118 (limit exceeded by 3 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 118 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 172 (limit exceeded by 5 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 172 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 118 (limit exceeded by 3 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 118 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 64 (limit exceeded by 1 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 118 (limit exceeded by 3 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 118 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 64 (limit exceeded by 1 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 118 (limit exceeded by 3 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 118 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 64 (limit exceeded by 0 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 91 (limit exceeded by 2 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 91 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 64 (limit exceeded by 0 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 91 (limit exceeded by 2 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 91 for CPU BOTTOMSIDE fan.
>adt746x: setting fans speed to 64 (limit exceeded by 0 on CPU BOTTOMSIDE) 
>adt746x: Setting speed to 64 for CPU BOTTOMSIDE fan.
>agpgart: Putting AGP V2 device at 0000:00:0b.0 into 1x mode
>agpgart: Putting AGP V2 device at 0000:00:10.0 into 1x mode
>[drm] Loading R200 Microcode
>adt746x: Stopping fans.
>adt746x: Setting speed to 0 for CPU BOTTOMSIDE fan.

Actions: View

Attachments on bug 116138: 49409