Attachment 49558 Details for Bug 116364

hwinfo

hwinfo.txt (text/plain), 199.75 KB, created by Magnus Boman on 2005-09-12 04:22:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Magnus Boman

Created: 2005-09-12 04:22:07 UTC

Size: 199.75 KB

patch

obsolete

>============ start debug info ============
>libhd version 11.21 (ia32)
>kernel version is 2.6
>----- /proc/cmdline -----
>  BOOT_IMAGE=linux initrd=initrd splash=silent vga=0x314 install=ftp://147.2.142.117/install/slp10/CD1 netdevice=eth0 dhcp=1
>----- /proc/cmdline end -----
>debug = 0xff7ffff7
>probe = 0x00138fc4aa17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc)
>shm: attached segment 2228226 at 0xb79fe000
>>> hal.1: read hal data
>  hal: connected to: :1.24
>----- hal device list -----
>  0: udi = '/org/freedesktop/Hal/devices/volume_label_SU810_001'
>  info.callouts.add = { 'hald-add-selinux-mount-option' }
>  volume.policy.desired_mount_point = 'SU810.001'
>  volume.policy.mount_filesystem = 'iso9660'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_label_SU810_001'
>  info.product = 'SU810.001'
>  volume.disc.is_svcd = false
>  volume.disc.is_vcd = false
>  volume.disc.is_videodvd = false
>  volume.disc.is_rewritable = false
>  volume.disc.is_appendable = false
>  volume.disc.is_blank = false
>  volume.disc.has_data = true
>  volume.disc.has_audio = false
>  volume.disc.type = 'cd_r'
>  volume.size = 713406464ull (0x2a85b800ull)
>  volume.num_blocks = 1393372 (0x1542dc)
>  volume.block_size = 2048 (0x800)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = true
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = 'SU810.001'
>  volume.uuid = ''
>  volume.fsversion = ''
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'iso9660'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_HL_DT_ST_RW/DVD_GCC_4481B'
>  block.is_volume = true
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_model_HL_DT_ST_RW/DVD_GCC_4481B'
>  linux.sysfs_path_device = '/sys/block/hda/fakevolume'
>  linux.sysfs_path = '/sys/block/hda/fakevolume'
>
>  1: udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  linux.hotplug_type = 4 (0x4)
>  processor.can_throttle = false
>  processor.number = 0 (0x0)
>  info.capabilities = { 'processor' }
>  info.category = 'processor'
>  info.product = 'Processor'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 1 (0x1)
>  linux.acpi_path = '/proc/acpi/processor/CPU0'
>
>  2: udi = '/org/freedesktop/Hal/devices/computer_storage'
>  info.callouts.add = { 'hald-add-selinux-mount-option' }
>  storage.policy.desired_mount_point = 'floppy'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/computer_storage'
>  info.udi = '/org/freedesktop/Hal/devices/computer_storage'
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  storage.removable = true
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  storage.physical_device = '/org/freedesktop/Hal/devices/computer'
>  storage.drive_type = 'floppy'
>  info.product = 'PC Floppy Drive'
>  info.vendor = ''
>  storage.vendor = 'PC Floppy Drive'
>  storage.model = ''
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = true
>  storage.bus = 'platform'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 2 (0x2)
>  block.device = '/dev/fd0'
>  linux.hotplug_type = 3 (0x3)
>  linux.sysfs_path_device = '/sys/block/fd0'
>  linux.sysfs_path = '/sys/block/fd0'
>
>  3: udi = '/org/freedesktop/Hal/devices/storage_model_HL_DT_ST_RW/DVD_GCC_4481B'
>  info.callouts.add = { 'hald-add-selinux-mount-option' }
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrecorder'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_HL_DT_ST_RW/DVD_GCC_4481B'
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_HL_DT_ST_RW/DVD_GCC_4481B'
>  storage.cdrom.write_speed = 8450 (0x2102)
>  storage.cdrom.read_speed = 8450 (0x2102)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = false
>  storage.cdrom.dvdplusrw = false
>  storage.cdrom.dvdplusr = false
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = false
>  storage.cdrom.dvd = true
>  storage.cdrom.cdrw = true
>  storage.cdrom.cdr = true
>  storage.firmware_version = 'E106'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'HL-DT-ST RW/DVD GCC-4481B'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'HL-DT-ST RW/DVD GCC-4481B'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'
>  linux.sysfs_path_device = '/sys/block/hda'
>  linux.sysfs_path = '/sys/block/hda'
>
>  4: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input'
>  input.product = 'ImExPS/2 Generic Explorer Mouse'
>  info.product = 'ImExPS/2 Generic Explorer Mouse'
>  linux.device_file = '/dev/input/event2'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event2'
>  info.capabilities = { 'input', 'input.mouse' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  linux.sysfs_path = '/sys/class/input/event2'
>
>  5: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux Port'
>  serio.description = 'i8042 Aux Port'
>  serio.id = 'serio0'
>  info.linux.driver = 'psmouse'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
>
>  6: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input'
>  input.product = 'AT Translated Set 2 keyboard'
>  info.product = 'AT Translated Set 2 keyboard'
>  linux.device_file = '/dev/input/event1'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event1'
>  info.capabilities = { 'input', 'input.keyboard' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.sysfs_path = '/sys/class/input/event1'
>
>  7: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Kbd Port'
>  serio.description = 'i8042 Kbd Port'
>  serio.id = 'serio1'
>  info.linux.driver = 'atkbd'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
>
>  8: udi = '/org/freedesktop/Hal/devices/pci_8086_2588'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2588'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0185)'
>  pci.subsys_vendor = 'Dell'
>  info.product = 'E7220/E7221 Memory Controller Hub'
>  pci.product = 'E7220/E7221 Memory Controller Hub'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 389 (0x185)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9608 (0x2588)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>
>  9: udi = '/org/freedesktop/Hal/devices/pci_8086_32c'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_32c'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '6702PXH PCI Express-to-PCI Bridge A'
>  pci.product = '6702PXH PCI Express-to-PCI Bridge A'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 812 (0x32c)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2589'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>
>  10: udi = '/org/freedesktop/Hal/devices/pci_8086_2589'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2589'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'E7220/E7221 PCI Express Root Port'
>  pci.product = 'E7220/E7221 PCI Express Root Port'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9609 (0x2589)
>  info.linux.driver = 'pcieport-driver'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>
>  11: udi = '/org/freedesktop/Hal/devices/pci_8086_258a'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_258a'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0185)'
>  pci.subsys_vendor = 'Dell'
>  info.product = 'E7221 Integrated Graphics Controller'
>  pci.product = 'E7221 Integrated Graphics Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 3 (0x3)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 389 (0x185)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9610 (0x258a)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
>
>  12: udi = '/org/freedesktop/Hal/devices/pci_8086_2660'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2660'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9824 (0x2660)
>  info.linux.driver = 'pcieport-driver'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'
>
>  13: udi = '/org/freedesktop/Hal/devices/pci_8086_2662'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2662'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9826 (0x2662)
>  info.linux.driver = 'pcieport-driver'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1'
>
>  14: udi = '/org/freedesktop/Hal/devices/net_00_11_43_fc_f7_9a'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_11_43_fc_f7_9a'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 74155095962ull (0x1143fcf79aull)
>  info.product = 'Networking Interface'
>  net.interface_up = true
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 2 (0x2)
>  net.address = '00:11:43:fc:f7:9a'
>  net.interface = 'eth0'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_14e4_1659'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_14e4_1659'
>  linux.sysfs_path = '/sys/class/net/eth0'
>
>  15: udi = '/org/freedesktop/Hal/devices/pci_14e4_1659'
>  info.udi = '/org/freedesktop/Hal/devices/pci_14e4_1659'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0185)'
>  pci.subsys_vendor = 'Dell'
>  info.product = 'NetXtreme BCM5721 Gigabit Ethernet PCI Express'
>  pci.product = 'NetXtreme BCM5721 Gigabit Ethernet PCI Express'
>  info.vendor = 'Broadcom Corporation'
>  pci.vendor = 'Broadcom Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 389 (0x185)
>  pci.vendor_id = 5348 (0x14e4)
>  pci.product_id = 5721 (0x1659)
>  info.linux.driver = 'tg3'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:05:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2664'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.2/0000:05:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2/0000:05:00.0'
>
>  16: udi = '/org/freedesktop/Hal/devices/pci_8086_2664'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2664'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9828 (0x2664)
>  info.linux.driver = 'pcieport-driver'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.2'
>
>  17: udi = '/org/freedesktop/Hal/devices/pci_8086_2666'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2666'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9830 (0x2666)
>  info.linux.driver = 'pcieport-driver'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.3'
>
>  18: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.0'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0'
>
>  19: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.0'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2658'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2'
>
>  20: udi = '/org/freedesktop/Hal/devices/pci_8086_2658'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2658'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0185)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 389 (0x185)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9816 (0x2658)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
>
>  21: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.1'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 3 (0x3)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0'
>
>  22: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 3 (0x3)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.1'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2659'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb3'
>
>  23: udi = '/org/freedesktop/Hal/devices/pci_8086_2659'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2659'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0185)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 389 (0x185)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9817 (0x2659)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'
>
>  24: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.2'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 4 (0x4)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0'
>
>  25: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 4 (0x4)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.2'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265a'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb4'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4'
>
>  26: udi = '/org/freedesktop/Hal/devices/pci_8086_265a'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265a'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0185)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 389 (0x185)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9818 (0x265a)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'
>
>  27: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.3'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 5 (0x5)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0'
>
>  28: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 5 (0x5)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.3'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-8-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265b'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb5'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb5'
>
>  29: udi = '/org/freedesktop/Hal/devices/pci_8086_265b'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265b'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0185)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 389 (0x185)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9819 (0x265b)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'
>
>  30: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 1 (0x1)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-8-default ehci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 8 (0x8)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.7'
>  usb.speed_bcd = 294912 (0x48000)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0'
>
>  31: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 512 (0x200)
>  usb_device.speed_bcd = 294912 (0x48000)
>  usb_device.serial = '0000:00:1d.7'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 8 (0x8)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'EHCI Host Controller'
>  usb_device.product = 'EHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-8-default ehci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-8-default ehci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 1 (0x1)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265c'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb1'
>
>  32: udi = '/org/freedesktop/Hal/devices/pci_8086_265c'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265c'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0185)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 32 (0x20)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 389 (0x185)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9820 (0x265c)
>  info.linux.driver = 'ehci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'
>
>  33: udi = '/org/freedesktop/Hal/devices/pci_8086_244e'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_244e'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801 PCI Bridge'
>  pci.product = '82801 PCI Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 1 (0x1)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9294 (0x244e)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>
>  34: udi = '/org/freedesktop/Hal/devices/pci_8086_2640'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2640'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801FB/FR (ICH6/ICH6R) LPC Interface Bridge'
>  pci.product = '82801FB/FR (ICH6/ICH6R) LPC Interface Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9792 (0x2640)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
>
>  35: udi = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
>
>  36: udi = '/org/freedesktop/Hal/devices/pci_8086_266f'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0185)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 138 (0x8a)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 389 (0x185)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9839 (0x266f)
>  info.linux.driver = 'PIIX_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
>
>  37: udi = '/org/freedesktop/Hal/devices/pci_8086_2652_scsi_host_2'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2652_scsi_host_2'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 0 (0x0)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2652'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/host0'
>  linux.sysfs_path = '/sys/class/scsi_host/host0'
>
>  38: udi = '/org/freedesktop/Hal/devices/pci_8086_2652_scsi_host_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2652_scsi_host_1'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 1 (0x1)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2652'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/host1'
>  linux.sysfs_path = '/sys/class/scsi_host/host1'
>
>  39: udi = '/org/freedesktop/Hal/devices/pci_8086_2652_scsi_host_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2652_scsi_host_0'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 2 (0x2)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2652'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/host2'
>  linux.sysfs_path = '/sys/class/scsi_host/host2'
>
>  40: udi = '/org/freedesktop/Hal/devices/pci_8086_2652_scsi_host'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2652_scsi_host'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 3 (0x3)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2652'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/host3'
>  linux.sysfs_path = '/sys/class/scsi_host/host3'
>
>  41: udi = '/org/freedesktop/Hal/devices/pci_8086_2652'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2652'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x2652)'
>  pci.subsys_vendor = 'Intel Corporation'
>  info.product = '82801FR/FRW (ICH6R/ICH6RW) SATA Controller'
>  pci.product = '82801FR/FRW (ICH6R/ICH6RW) SATA Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 143 (0x8f)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 32902 (0x8086)
>  pci.subsys_product_id = 9810 (0x2652)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9810 (0x2652)
>  info.linux.driver = 'ahci'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'
>
>  42: udi = '/org/freedesktop/Hal/devices/pci_8086_266a'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266a'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0185)'
>  pci.subsys_vendor = 'Dell'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 5 (0x5)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4136 (0x1028)
>  pci.subsys_product_id = 389 (0x185)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9834 (0x266a)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'
>
>  43: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT DMA Controller'
>  pnp.description = 'AT DMA Controller'
>  pnp.id = 'PNP0200'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:00'
>  linux.sysfs_path = '/sys/devices/pnp0/00:00'
>
>  44: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Math Coprocessor'
>  pnp.description = 'Math Coprocessor'
>  pnp.id = 'PNP0c04'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:01'
>  linux.sysfs_path = '/sys/devices/pnp0/00:01'
>
>  45: udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT-style speaker sound'
>  pnp.description = 'AT-style speaker sound'
>  pnp.id = 'PNP0800'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:02'
>  linux.sysfs_path = '/sys/devices/pnp0/00:02'
>
>  46: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT Real-Time Clock'
>  pnp.description = 'AT Real-Time Clock'
>  pnp.id = 'PNP0b00'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:03'
>  linux.sysfs_path = '/sys/devices/pnp0/00:03'
>
>  47: udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PC standard floppy disk controller'
>  pnp.description = 'PC standard floppy disk controller'
>  pnp.id = 'PNP0700'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:04'
>  linux.sysfs_path = '/sys/devices/pnp0/00:04'
>
>  48: udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.id = 'PNP0303'
>  info.linux.driver = 'i8042 kbd'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:05'
>  linux.sysfs_path = '/sys/devices/pnp0/00:05'
>
>  49: udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PS/2 Port for PS/2-style Mice'
>  pnp.description = 'PS/2 Port for PS/2-style Mice'
>  pnp.id = 'PNP0f13'
>  info.linux.driver = 'i8042 aux'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:06'
>  linux.sysfs_path = '/sys/devices/pnp0/00:06'
>
>  50: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
>  linux.device_file = '/dev/ttyS0'
>  linux.subsystem = 'tty'
>  linux.hotplug_type = 2 (0x2)
>  info.product = '16550A-compatible COM port'
>  serial.type = 'platform'
>  serial.port = 0 (0x0)
>  serial.device = '/dev/ttyS0'
>  serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.capabilities = { 'serial' }
>  info.category = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.sysfs_path = '/sys/class/tty/ttyS0'
>
>  51: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = '16550A-compatible COM port'
>  pnp.description = '16550A-compatible COM port'
>  pnp.id = 'PNP0501'
>  info.linux.driver = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:07'
>  linux.sysfs_path = '/sys/devices/pnp0/00:07'
>
>  52: udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'ECP printer port'
>  pnp.description = 'ECP printer port'
>  pnp.id = 'PNP0401'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:08'
>  linux.sysfs_path = '/sys/devices/pnp0/00:08'
>
>  53: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'System Board'
>  pnp.description = 'System Board'
>  pnp.id = 'PNP0c01'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:09'
>  linux.sysfs_path = '/sys/devices/pnp0/00:09'
>
>  54: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0a'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0a'
>
>  55: udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PnP Device (PNP0103)'
>  pnp.id = 'PNP0103'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0b'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0b'
>
>  56: udi = '/org/freedesktop/Hal/devices/computer'
>  storage.policy.default.mount_option.exec = true
>  storage.policy.default.mount_option.pamconsole = true
>  storage.policy.default.mount_option.noauto = true
>  storage.policy.default.managed_keyword.secondary = 'kudzu'
>  storage.policy.default.managed_keyword.primary = 'managed'
>  storage.policy.default.use_managed_keyword = true
>  storage.policy.default.mount_root = '/media'
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-set-power-save' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', 'b' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'SetPowerSave' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
>  info.addons = { 'hald-addon-acpi' }
>  system.product = 'PowerEdge 800 Not Specified'
>  system.vendor = 'Dell Computer Corporation'
>  smbios.chassis.type = 'Main Server Chassis'
>  smbios.chassis.manufacturer = 'Dell Computer Corporation'
>  smbios.system.uuid = '44454C4C-3200-1039-8050-C6C04F443153'
>  smbios.system.serial = 'F29PD1S'
>  smbios.system.version = 'Not Specified'
>  smbios.system.product = 'PowerEdge 800'
>  smbios.system.manufacturer = 'Dell Computer Corporation'
>  smbios.bios.release_date = '10/04/2004'
>  smbios.bios.version = 'A00'
>  smbios.bios.vendor = 'Dell Computer Corporation'
>  power_management.acpi.linux.version = '20050408'
>  power_management.type = 'acpi'
>  power_management.is_enabled = true
>  system.formfactor = 'server'
>  system.kernel.machine = 'i686'
>  system.kernel.version = '2.6.13-8-default'
>  system.kernel.name = 'Linux'
>  info.udi = '/org/freedesktop/Hal/devices/computer'
>  info.product = 'Computer'
>  linux.sysfs_path_device = '(none)'
>  info.bus = 'unknown'
>----- hal device list end -----
>>> floppy.1: get nvram
>----- /proc/nvram -----
>  Checksum status: valid
>  # floppies     : 1
>  Floppy 0 type  : 3.5'' 1.44M
>  Floppy 1 type  : none
>  HD 0 type      : none
>  HD 1 type      : none
>  HD type 48 data: 0/0/0 C/H/S, precomp 0, lz 32929
>  HD type 49 data: 8769/2/0 C/H/S, precomp 0, lz 0
>  DOS base memory: 640 kB
>  Extended memory: 64512 kB (configured), 64512 kB (tested)
>  Gfx adapter    : EGA, VGA, ... (with BIOS)
>  FPU            : installed
>----- /proc/nvram end -----
>>> floppy.2: nvram info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>/dev/mem[0x400, 256]: mmap(, 4096,,,, 0x0) ok
>/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok
>  bios: 2 disks
>  bios: 639k low mem
>/dev/mem[0x9fc00, 1]: mmap(, 4096,,,, 0x9f000) ok
>/dev/mem[0x9fc00, 1024]: mmap(, 4096,,,, 0x9f000) ok
>  bios: EBDA 0x00400 bytes at 0x9fc00
>>> bios.2: rom
>----- SMBIOS Entry Point 0xfa870 - 0xfa88e -----
>  fa870  5f 53 4d 5f 94 1f 02 03 ea 00 00 00 00 00 00 00  "_SM_............"
>  fa880  5f 44 4d 49 5f 27 99 08 90 a8 0f 00 36 00 23  "_DMI_'......6.#"
>----- SMBIOS Entry Point end -----
>/dev/mem[0xfa890, 2201]: mmap(, 8192,,,, 0xfa000) ok
>----- SMBIOS Structure Table 0xfa890 - 0xfb128 -----
>  fa890  da 0b 00 da b2 00 17 0b 2e 68 00 00 00 00 14 00  ".........h......"
>  fa8a0  00 01 03 00 f0 04 07 90 da ea 7d 00 00 1f 00 03  "..........}....."
>  fa8b0  03 44 65 6c 6c 20 43 6f 6d 70 75 74 65 72 20 43  ".Dell Computer C"
>  fa8c0  6f 72 70 6f 72 61 74 69 6f 6e 00 20 20 20 20 20  "orporation.     "
>  fa8d0  20 20 00 41 30 30 00 31 30 2f 30 34 2f 32 30 30  "  .A00.10/04/200"
>  fa8e0  34 00 00 01 19 00 01 01 03 00 05 44 45 4c 4c 32  "4..........DELL2"
>  fa8f0  00 10 39 80 50 c6 c0 4f 44 31 53 06 44 65 6c 6c  "..9.P..OD1S.Dell"
>  fa900  20 43 6f 6d 70 75 74 65 72 20 43 6f 72 70 6f 72  " Computer Corpor"
>  fa910  61 74 69 6f 6e 00 20 20 20 20 20 20 20 00 50 6f  "ation.       .Po"
>  fa920  77 65 72 45 64 67 65 20 38 30 30 00 20 20 20 20  "werEdge 800.    "
>  fa930  00 46 32 39 50 44 31 53 00 00 02 09 00 02 01 02  ".F29PD1S........"
>  fa940  03 04 00 44 65 6c 6c 20 43 6f 6d 70 75 74 65 72  "...Dell Computer"
>  fa950  20 43 6f 72 70 6f 72 61 74 69 6f 6e 00 30 47 37  " Corporation.0G7"
>  fa960  32 35 35 00 41 30 30 00 2e 2e 43 4e 37 31 37 30  "255.A00...CN7170"
>  fa970  33 35 31 41 30 33 35 34 2e 00 00 03 11 00 03 01  "351A0354........"
>  fa980  91 00 03 00 03 03 03 02 00 00 00 00 44 65 6c 6c  "............Dell"
>  fa990  20 43 6f 6d 70 75 74 65 72 20 43 6f 72 70 6f 72  " Computer Corpor"
>  fa9a0  61 74 69 6f 6e 00 20 20 20 20 20 20 20 00 46 32  "ation.       .F2"
>  fa9b0  39 50 44 31 53 00 20 20 20 20 20 20 20 20 20 20  "9PD1S.          "
>  fa9c0  20 20 00 00 04 23 00 04 01 03 b2 02 41 0f 00 00  "  ...#......A..."
>  fa9d0  ff fb eb bf 00 8f 20 03 d8 0e 80 0c 41 04 00 07  "...... .....A..."
>  fa9e0  01 07 02 07 00 00 00 50 52 4f 43 00 49 6e 74 65  ".......PROC.Inte"
>  fa9f0  6c 00 00 07 13 00 07 00 80 00 10 00 10 00 02 00  "l..............."
>  faa00  02 00 00 05 04 07 00 00 07 13 01 07 00 81 02 00  "................"
>  faa10  04 00 04 02 00 02 00 00 05 05 07 00 00 07 13 02  "................"
>  faa20  07 00 82 02 00 00 00 00 02 00 02 00 00 02 05 00  "................"
>  faa30  00 00 08 09 00 08 00 00 00 07 1c 00 00 7e 09 01  ".............~.."
>  faa40  08 00 00 00 07 1c 00 00 08 09 02 08 00 00 00 12  "................"
>  faa50  10 00 00 08 09 03 08 00 00 00 12 10 00 00 08 09  "................"
>  faa60  04 08 00 00 00 12 10 00 00 08 09 05 08 00 00 00  "................"
>  faa70  12 10 00 00 08 09 06 08 00 00 00 05 02 00 00 08  "................"
>  faa80  09 07 08 00 00 00 0b 1f 00 00 7e 09 08 08 00 00  "..........~....."
>  faa90  00 0b 1f 00 00 08 09 09 08 00 00 00 08 09 00 00  "................"
>  faaa0  08 09 0a 08 00 00 00 0f 0d 00 00 08 09 0b 08 00  "................"
>  faab0  00 00 0f 0e 00 00 09 0d 00 09 01 a5 08 03 04 01  "................"
>  faac0  00 04 01 53 4c 4f 54 5f 31 00 00 09 0d 01 09 01  "...SLOT_1......."
>  faad0  a5 08 03 04 02 00 04 01 53 4c 4f 54 5f 32 00 00  "........SLOT_2.."
>  faae0  09 0d 02 09 01 12 06 03 04 03 00 04 01 53 4c 4f  ".............SLO"
>  faaf0  54 5f 33 00 00 09 0d 03 09 01 12 06 03 04 04 00  "T_3............."
>  fab00  04 01 53 4c 4f 54 5f 34 00 00 09 0d 04 09 01 06  "..SLOT_4........"
>  fab10  05 03 03 05 00 06 01 53 4c 4f 54 5f 35 00 00 0a  ".......SLOT_5..."
>  fab20  08 00 0a 83 01 85 02 49 6e 74 65 6c 20 43 75 52  ".......Intel CuR"
>  fab30  69 76 65 72 20 45 6d 62 65 64 64 65 64 20 56 69  "iver Embedded Vi"
>  fab40  64 65 6f 00 42 72 6f 61 64 63 6f 6d 20 35 37 32  "deo.Broadcom 572"
>  fab50  31 20 45 74 68 65 72 6e 65 74 00 00 0b 05 00 0b  "1 Ethernet......"
>  fab60  02 44 65 6c 6c 20 53 79 73 74 65 6d 00 35 5b 30  ".Dell System.5[0"
>  fab70  30 30 30 5d 00 00 7e 90 00 7e 31 5b 20 20 20 20  "000]..~..~1[    "
>  fab80  5d 00 33 5b 20 20 20 5d 00 35 5b 30 30 30 30 5d  "].3[   ].5[0000]"
>  fab90  00 37 5b 20 20 20 20 5d 00 38 5b 20 20 20 20 20  ".7[    ].8[     "
>  faba0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fabb0  20 20 20 20 20 20 20 20 20 20 20 5d 00 39 5b 20  "           ].9[ "
>  fabc0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 5d  "               ]"
>  fabd0  00 31 30 5b 20 20 20 5d 00 31 31 5b 20 20 20 5d  ".10[   ].11[   ]"
>  fabe0  00 31 32 5b 20 20 20 20 20 20 20 20 20 20 20 20  ".12[            "
>  fabf0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fac00  20 20 20 20 5d 00 00 00 0c 05 00 0c 02 4e 56 52  "    ]........NVR"
>  fac10  41 4d 5f 43 4c 52 3a 20 20 43 6c 65 61 72 20 75  "AM_CLR:  Clear u"
>  fac20  73 65 72 20 73 65 74 74 61 62 6c 65 20 4e 56 52  "ser settable NVR"
>  fac30  41 4d 20 61 72 65 61 73 20 61 6e 64 20 73 65 74  "AM areas and set"
>  fac40  20 64 65 66 61 75 6c 74 73 00 45 4e 5f 50 41 53  " defaults.EN_PAS"
>  fac50  53 57 44 3a 20 20 43 6c 6f 73 65 20 74 6f 20 65  "SWD:  Close to e"
>  fac60  6e 61 62 6c 65 20 70 61 73 73 77 6f 72 64 00 00  "nable password.."
>  fac70  0d 16 00 0d 01 00 00 00 00 00 00 00 00 00 00 00  "................"
>  fac80  00 00 00 00 00 01 65 6e 7c 55 53 7c 69 73 6f 38  "......en|US|iso8"
>  fac90  38 35 39 2d 31 00 00 10 0f 00 10 03 03 05 00 00  "859-1..........."
>  faca0  40 00 fe ff 04 00 00 00 11 1b 00 11 00 10 fe ff  "@..............."
>  facb0  48 00 40 00 00 04 09 01 01 00 12 80 00 15 02 02  "H.@............."
>  facc0  03 00 04 44 49 4d 4d 31 5f 41 00 43 45 30 30 30  "...DIMM1_A.CE000"
>  facd0  30 30 30 30 30 30 30 30 30 30 30 00 34 33 30 33  "00000000000.4303"
>  face0  44 39 32 34 00 4d 33 20 39 31 54 32 39 35 33 42  "D924.M3 91T2953B"
>  facf0  47 30 2d 43 44 35 20 00 00 11 1b 01 11 00 10 fe  "G0-CD5 ........."
>  fad00  ff 48 00 40 00 00 04 09 01 01 00 12 80 00 15 02  ".H.@............"
>  fad10  02 03 00 04 44 49 4d 4d 32 5f 41 00 43 45 30 30  "....DIMM2_A.CE00"
>  fad20  30 30 30 30 30 30 30 30 30 30 30 30 00 34 33 30  "000000000000.430"
>  fad30  46 44 38 42 39 00 4d 33 20 39 31 54 32 39 35 33  "FD8B9.M3 91T2953"
>  fad40  42 47 30 2d 43 44 35 20 00 00 11 1b 02 11 00 10  "BG0-CD5 ........"
>  fad50  fe ff 48 00 40 00 00 04 09 01 01 00 12 80 00 15  "..H.@..........."
>  fad60  02 02 03 00 04 44 49 4d 4d 31 5f 42 00 43 45 30  ".....DIMM1_B.CE0"
>  fad70  30 30 30 30 30 30 30 30 30 30 30 30 30 00 34 33  "0000000000000.43"
>  fad80  30 37 44 38 42 32 00 4d 33 20 39 31 54 32 39 35  "07D8B2.M3 91T295"
>  fad90  33 42 47 30 2d 43 44 35 20 00 00 11 1b 03 11 00  "3BG0-CD5 ......."
>  fada0  10 fe ff 48 00 40 00 00 04 09 01 01 00 12 80 00  "...H.@.........."
>  fadb0  15 02 02 03 00 04 44 49 4d 4d 32 5f 42 00 43 45  "......DIMM2_B.CE"
>  fadc0  30 30 30 30 30 30 30 30 30 30 30 30 30 30 00 34  "00000000000000.4"
>  fadd0  33 31 30 44 38 43 37 00 4d 33 20 39 31 54 32 39  "310D8C7.M3 91T29"
>  fade0  35 33 42 47 30 2d 43 44 35 20 00 00 13 0f 00 13  "53BG0-CD5 ......"
>  fadf0  00 00 00 00 ff ff 33 00 00 10 04 00 00 14 13 00  "......3........."
>  fae00  14 00 00 00 00 ff ff 33 00 00 11 00 13 01 00 00  ".......3........"
>  fae10  00 00 14 13 01 14 00 00 00 00 ff ff 33 00 01 11  "............3..."
>  fae20  00 13 02 00 00 00 00 14 13 02 14 00 00 00 00 ff  "................"
>  fae30  ff 33 00 02 11 00 13 03 00 00 00 00 14 13 03 14  ".3.............."
>  fae40  00 00 00 00 ff ff 33 00 03 11 00 13 04 00 00 00  "......3........."
>  fae50  00 7e 13 04 14 00 00 00 00 00 00 00 00 00 00 00  ".~.............."
>  fae60  13 01 00 00 00 00 7e 13 05 14 00 00 00 00 00 00  "......~........."
>  fae70  00 00 00 00 00 13 02 00 00 00 00 20 0b 00 20 00  "........... .. ."
>  fae80  00 00 00 00 00 00 00 00 26 12 00 26 01 15 20 ff  "........&..&.. ."
>  fae90  a9 0c 00 00 00 00 00 00 40 00 00 00 d0 0a 00 d0  "........@......."
>  faea0  01 04 fe 00 85 01 00 00 d1 0c 00 d1 78 03 07 03  "............x..."
>  faeb0  04 0f 80 05 00 00 d2 0c 00 d2 f8 03 04 03 06 80  "................"
>  faec0  04 05 00 00 d4 9d 00 d4 70 00 71 00 00 10 2d 2e  "........p.q...-."
>  faed0  03 00 11 7f 80 04 00 11 7f 00 07 00 25 9f 00 08  "............%..."
>  faee0  00 25 9f 20 09 00 25 9f 40 0a 00 25 9f 60 0b 00  ".%. ..%.@..%.`.."
>  faef0  25 7f 00 0c 00 25 7f 80 0f 00 25 f8 00 11 00 25  "%....%....%....%"
>  faf00  f8 01 12 00 25 f8 02 2e 40 25 f8 03 2f 40 25 f8  "....%...@%../@%."
>  faf10  04 00 00 25 f8 05 31 40 11 fb 00 32 40 11 fb 04  "...%..1@...2@..."
>  faf20  9d 00 11 fd 02 9e 00 11 fd 00 42 00 11 fe 01 43  "..........B....C"
>  faf30  00 11 fe 00 9f 00 26 fe 01 a0 00 26 fe 00 51 00  "......&....&..Q."
>  faf40  26 3f 00 52 00 26 3f 40 53 00 26 3f 80 54 00 26  "&?.R.&?@S.&?.T.&"
>  faf50  3f c0 28 40 26 df 20 29 40 26 df 00 ff ff 00 00  "?.(@&. )@&......"
>  faf60  00 00 00 d4 e8 01 d4 70 00 71 00 03 40 59 6d 6b  ".......p.q..@Ymk"
>  faf70  00 78 7f 80 6c 00 78 7f 00 58 00 78 fa 05 59 00  ".x..l.x..X.x..Y."
>  faf80  78 fa 00 5c 00 78 bf 40 5d 00 78 bf 00 04 80 78  "x..\.x.@].x....x"
>  faf90  fd 02 01 a0 78 fd 00 08 40 51 fe 01 09 40 51 fe  "....x...@Q...@Q."
>  fafa0  00 0a 40 51 fd 02 0b 40 51 fd 00 19 00 55 e7 00  "..@Q...@Q....U.."
>  fafb0  1a 00 55 e7 08 1b 00 55 e7 10 ff 00 55 9f 40 fe  "..U....U....U.@."
>  fafc0  00 55 9f 20 fd 00 55 9f 00 1e 00 55 fd 02 50 00  ".U. ..U....U..P."
>  fafd0  55 fd 00 8a 00 55 fe 01 8b 00 55 fe 00 bf 00 53  "U....U....U....S"
>  fafe0  fe 00 c0 00 53 fe 01 33 40 53 e7 00 34 40 53 e7  "....S..3@S..4@S."
>  faff0  08 35 40 53 e7 10 36 40 53 e7 18 1a 40 53 fd 02  ".5@S..6@S...@S.."
>  fb000  1b 40 53 fd 00 1c 40 53 fb 04 1d 40 53 fb 00 6e  ".@S...@S...@S..n"
>  fb010  00 58 fc 01 2d 00 58 fc 02 2e 00 58 fc 00 22 40  ".X..-.X....X.."@"
>  fb020  58 ef 10 23 40 58 ef 00 d8 00 55 7f 80 d9 00 55  "X..#@X....U....U"
>  fb030  7f 00 00 c0 5c 00 0a 03 c0 67 00 05 83 00 76 00  "....\....g....v."
>  fb040  00 84 00 77 00 00 ff ff 00 00 00 00 00 d4 a2 02  "...w............"
>  fb050  d4 72 00 73 00 00 40 5d 5e 26 40 42 fe 01 27 40  ".r.s..@]^&@B..'@"
>  fb060  42 fe 00 37 40 42 fb 00 38 40 42 fb 04 28 01 4a  "B..7@B..8@B..(.J"
>  fb070  fc 00 29 01 4a fc 01 2a 01 4a fc 02 d1 00 7e fe  "..).J..*.J....~."
>  fb080  00 d2 00 7e fe 01 d3 00 00 00 02 00 90 2c 00 00  "...~.........,.."
>  fb090  01 90 2d 00 00 17 01 4b fe 00 18 01 4b fe 01 19  "..-....K....K..."
>  fb0a0  01 4b fd 00 1a 01 4b fd 02 1b 01 4b fb 00 1c 01  ".K....K....K...."
>  fb0b0  4b fb 04 1d 01 4b f7 00 1e 01 4b f7 08 35 01 4c  "K....K....K..5.L"
>  fb0c0  fc 00 37 01 4c fc 01 39 01 4c fc 02 3b 01 4c f3  "..7.L..9.L..;.L."
>  fb0d0  04 3d 01 4c f3 08 de 00 76 fe 01 a1 00 48 fc 02  ".=.L....v....H.."
>  fb0e0  a3 00 48 fc 01 a2 00 48 fc 00 ff ff 00 00 00 00  "..H....H........"
>  fb0f0  00 d8 09 00 d8 01 02 01 00 00 49 6e 74 65 6c 00  "..........Intel."
>  fb100  43 75 52 69 76 65 72 20 42 75 69 6c 64 20 33 32  "CuRiver Build 32"
>  fb110  35 37 00 00 de 0d 00 de 01 02 ff ff 00 00 00 00  "57.............."
>  fb120  00 00 00 7f 04 00 7f 00 00  "........."
>----- SMBIOS Structure Table end -----
>  type 0xda [0xda00]: da 0b 00 da b2 00 17 0b 2e 68 00
>  type 0x00 [0x0000]: 00 14 00 00 01 03 00 f0 04 07 90 da ea 7d 00 00 1f 00 03 03
>       str1: "Dell Computer Corporation"
>       str3: "A00"
>       str4: "10/04/2004"
>  type 0x01 [0x0100]: 01 19 00 01 01 03 00 05 44 45 4c 4c 32 00 10 39 80 50 c6 c0 4f 44 31 53 06
>       str1: "Dell Computer Corporation"
>       str3: "PowerEdge 800"
>       str5: "F29PD1S"
>  type 0x02 [0x0200]: 02 09 00 02 01 02 03 04 00
>       str1: "Dell Computer Corporation"
>       str2: "0G7255"
>       str3: "A00"
>       str4: "..CN7170351A0354."
>  type 0x03 [0x0300]: 03 11 00 03 01 91 00 03 00 03 03 03 02 00 00 00 00
>       str1: "Dell Computer Corporation"
>       str3: "F29PD1S"
>  type 0x04 [0x0400]: 04 23 00 04 01 03 b2 02 41 0f 00 00 ff fb eb bf 00 8f 20 03 d8 0e 80 0c 41 04 00 07 01 07 02 07 00 00 00
>       str1: "PROC"
>       str2: "Intel"
>  type 0x07 [0x0700]: 07 13 00 07 00 80 00 10 00 10 00 02 00 02 00 00 05 04 07
>  type 0x07 [0x0701]: 07 13 01 07 00 81 02 00 04 00 04 02 00 02 00 00 05 05 07
>  type 0x07 [0x0702]: 07 13 02 07 00 82 02 00 00 00 00 02 00 02 00 00 02 05 00
>  type 0x08 [0x0800]: 08 09 00 08 00 00 00 07 1c
>  type 0x7e [0x0801]: 7e 09 01 08 00 00 00 07 1c
>  type 0x08 [0x0802]: 08 09 02 08 00 00 00 12 10
>  type 0x08 [0x0803]: 08 09 03 08 00 00 00 12 10
>  type 0x08 [0x0804]: 08 09 04 08 00 00 00 12 10
>  type 0x08 [0x0805]: 08 09 05 08 00 00 00 12 10
>  type 0x08 [0x0806]: 08 09 06 08 00 00 00 05 02
>  type 0x08 [0x0807]: 08 09 07 08 00 00 00 0b 1f
>  type 0x7e [0x0808]: 7e 09 08 08 00 00 00 0b 1f
>  type 0x08 [0x0809]: 08 09 09 08 00 00 00 08 09
>  type 0x08 [0x080a]: 08 09 0a 08 00 00 00 0f 0d
>  type 0x08 [0x080b]: 08 09 0b 08 00 00 00 0f 0e
>  type 0x09 [0x0900]: 09 0d 00 09 01 a5 08 03 04 01 00 04 01
>       str1: "SLOT_1"
>  type 0x09 [0x0901]: 09 0d 01 09 01 a5 08 03 04 02 00 04 01
>       str1: "SLOT_2"
>  type 0x09 [0x0902]: 09 0d 02 09 01 12 06 03 04 03 00 04 01
>       str1: "SLOT_3"
>  type 0x09 [0x0903]: 09 0d 03 09 01 12 06 03 04 04 00 04 01
>       str1: "SLOT_4"
>  type 0x09 [0x0904]: 09 0d 04 09 01 06 05 03 03 05 00 06 01
>       str1: "SLOT_5"
>  type 0x0a [0x0a00]: 0a 08 00 0a 83 01 85 02
>       str1: "Intel CuRiver Embedded Video"
>       str2: "Broadcom 5721 Ethernet"
>  type 0x0b [0x0b00]: 0b 05 00 0b 02
>       str1: "Dell System"
>       str2: "5[0000]"
>  type 0x7e [0x7e00]: 7e 90 00 7e 31 5b 20 20 20 20 5d 00 33 5b 20 20 20 5d 00 35 5b 30 30 30 30 5d 00 37 5b 20 20 20 20 5d 00 38 5b 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 5d 00 39 5b 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 5d 00 31 30 5b 20 20 20 5d 00 31 31 5b 20 20 20 5d 00 31 32 5b 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 5d 00
>  type 0x0c [0x0c00]: 0c 05 00 0c 02
>       str1: "NVRAM_CLR:  Clear user settable NVRAM areas and set defaults"
>       str2: "EN_PASSWD:  Close to enable password"
>  type 0x0d [0x0d00]: 0d 16 00 0d 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
>       str1: "en|US|iso8859-1"
>  type 0x10 [0x1000]: 10 0f 00 10 03 03 05 00 00 40 00 fe ff 04 00
>  type 0x11 [0x1100]: 11 1b 00 11 00 10 fe ff 48 00 40 00 00 04 09 01 01 00 12 80 00 15 02 02 03 00 04
>       str1: "DIMM1_A"
>       str2: "CE00000000000000"
>       str3: "4303D924"
>       str4: "M3 91T2953BG0-CD5"
>  type 0x11 [0x1101]: 11 1b 01 11 00 10 fe ff 48 00 40 00 00 04 09 01 01 00 12 80 00 15 02 02 03 00 04
>       str1: "DIMM2_A"
>       str2: "CE00000000000000"
>       str3: "430FD8B9"
>       str4: "M3 91T2953BG0-CD5"
>  type 0x11 [0x1102]: 11 1b 02 11 00 10 fe ff 48 00 40 00 00 04 09 01 01 00 12 80 00 15 02 02 03 00 04
>       str1: "DIMM1_B"
>       str2: "CE00000000000000"
>       str3: "4307D8B2"
>       str4: "M3 91T2953BG0-CD5"
>  type 0x11 [0x1103]: 11 1b 03 11 00 10 fe ff 48 00 40 00 00 04 09 01 01 00 12 80 00 15 02 02 03 00 04
>       str1: "DIMM2_B"
>       str2: "CE00000000000000"
>       str3: "4310D8C7"
>       str4: "M3 91T2953BG0-CD5"
>  type 0x13 [0x1300]: 13 0f 00 13 00 00 00 00 ff ff 33 00 00 10 04
>  type 0x14 [0x1400]: 14 13 00 14 00 00 00 00 ff ff 33 00 00 11 00 13 01 00 00
>  type 0x14 [0x1401]: 14 13 01 14 00 00 00 00 ff ff 33 00 01 11 00 13 02 00 00
>  type 0x14 [0x1402]: 14 13 02 14 00 00 00 00 ff ff 33 00 02 11 00 13 03 00 00
>  type 0x14 [0x1403]: 14 13 03 14 00 00 00 00 ff ff 33 00 03 11 00 13 04 00 00
>  type 0x7e [0x1404]: 7e 13 04 14 00 00 00 00 00 00 00 00 00 00 00 13 01 00 00
>  type 0x7e [0x1405]: 7e 13 05 14 00 00 00 00 00 00 00 00 00 00 00 13 02 00 00
>  type 0x20 [0x2000]: 20 0b 00 20 00 00 00 00 00 00 00
>  type 0x26 [0x2600]: 26 12 00 26 01 15 20 ff a9 0c 00 00 00 00 00 00 40 00
>  type 0xd0 [0xd000]: d0 0a 00 d0 01 04 fe 00 85 01
>  type 0xd1 [0xd100]: d1 0c 00 d1 78 03 07 03 04 0f 80 05
>  type 0xd2 [0xd200]: d2 0c 00 d2 f8 03 04 03 06 80 04 05
>  type 0xd4 [0xd400]: d4 9d 00 d4 70 00 71 00 00 10 2d 2e 03 00 11 7f 80 04 00 11 7f 00 07 00 25 9f 00 08 00 25 9f 20 09 00 25 9f 40 0a 00 25 9f 60 0b 00 25 7f 00 0c 00 25 7f 80 0f 00 25 f8 00 11 00 25 f8 01 12 00 25 f8 02 2e 40 25 f8 03 2f 40 25 f8 04 00 00 25 f8 05 31 40 11 fb 00 32 40 11 fb 04 9d 00 11 fd 02 9e 00 11 fd 00 42 00 11 fe 01 43 00 11 fe 00 9f 00 26 fe 01 a0 00 26 fe 00 51 00 26 3f 00 52 00 26 3f 40 53 00 26 3f 80 54 00 26 3f c0 28 40 26 df 20 29 40 26 df 00 ff ff 00 00 00
>  type 0xd4 [0xd401]: d4 e8 01 d4 70 00 71 00 03 40 59 6d 6b 00 78 7f 80 6c 00 78 7f 00 58 00 78 fa 05 59 00 78 fa 00 5c 00 78 bf 40 5d 00 78 bf 00 04 80 78 fd 02 01 a0 78 fd 00 08 40 51 fe 01 09 40 51 fe 00 0a 40 51 fd 02 0b 40 51 fd 00 19 00 55 e7 00 1a 00 55 e7 08 1b 00 55 e7 10 ff 00 55 9f 40 fe 00 55 9f 20 fd 00 55 9f 00 1e 00 55 fd 02 50 00 55 fd 00 8a 00 55 fe 01 8b 00 55 fe 00 bf 00 53 fe 00 c0 00 53 fe 01 33 40 53 e7 00 34 40 53 e7 08 35 40 53 e7 10 36 40 53 e7 18 1a 40 53 fd 02 1b 40 53 fd 00 1c 40 53 fb 04 1d 40 53 fb 00 6e 00 58 fc 01 2d 00 58 fc 02 2e 00 58 fc 00 22 40 58 ef 10 23 40 58 ef 00 d8 00 55 7f 80 d9 00 55 7f 00 00 c0 5c 00 0a 03 c0 67 00 05 83 00 76 00 00 84 00 77 00 00 ff ff 00 00 00
>  type 0xd4 [0xd402]: d4 a2 02 d4 72 00 73 00 00 40 5d 5e 26 40 42 fe 01 27 40 42 fe 00 37 40 42 fb 00 38 40 42 fb 04 28 01 4a fc 00 29 01 4a fc 01 2a 01 4a fc 02 d1 00 7e fe 00 d2 00 7e fe 01 d3 00 00 00 02 00 90 2c 00 00 01 90 2d 00 00 17 01 4b fe 00 18 01 4b fe 01 19 01 4b fd 00 1a 01 4b fd 02 1b 01 4b fb 00 1c 01 4b fb 04 1d 01 4b f7 00 1e 01 4b f7 08 35 01 4c fc 00 37 01 4c fc 01 39 01 4c fc 02 3b 01 4c f3 04 3d 01 4c f3 08 de 00 76 fe 01 a1 00 48 fc 02 a3 00 48 fc 01 a2 00 48 fc 00 ff ff 00 00 00
>  type 0xd8 [0xd800]: d8 09 00 d8 01 02 01 00 00
>       str1: "Intel"
>       str2: "CuRiver Build 3257"
>  type 0xde [0xde00]: de 0d 00 de 01 02 ff ff 00 00 00 00 00
>  type 0x7f [0x7f00]: 7f 04 00 7f
>  smbios: stopped at end tag
>>> bios.3: smp
>  smp: valid MP FP at 0xfe710 (size 0x10, rev 4), MP config at 0xf0000
>/dev/mem[0xf0000, 65536]: mmap(, 65536,,,, 0xf0000) ok
>  base MP config table (59 entries):
>  type 0, len 20
>    00 00 14 03 41 0f 00 00 ff fb eb bf 00 00 00 00 00 00 00 00  "....A..............."
>  type 1, len 8
>    01 00 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 01 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 02 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 03 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 04 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 05 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 06 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 07 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 08 49 53 41 20 20 20  "..ISA   "
>  type 2, len 8
>    02 02 20 01 00 00 c0 fe  ".. ....."
>  type 2, len 8
>    02 03 20 01 00 00 c8 fe  ".. ....."
>  type 3, len 8
>    03 03 05 00 08 00 02 00  "........"
>  type 3, len 8
>    03 00 00 00 08 01 02 01  "........"
>  type 3, len 8
>    03 00 00 00 08 00 02 02  "........"
>  type 3, len 8
>    03 00 00 00 08 04 02 04  "........"
>  type 3, len 8
>    03 00 00 00 08 06 02 06  "........"
>  type 3, len 8
>    03 00 00 00 08 07 02 07  "........"
>  type 3, len 8
>    03 00 00 00 08 08 02 08  "........"
>  type 3, len 8
>    03 00 00 00 08 09 02 09  "........"
>  type 3, len 8
>    03 00 00 00 08 0c 02 0c  "........"
>  type 3, len 8
>    03 00 00 00 08 0e 02 0e  "........"
>  type 3, len 8
>    03 00 00 00 08 0f 02 0f  "........"
>  type 3, len 8
>    03 00 00 00 00 08 02 10  "........"
>  type 3, len 8
>    03 00 00 00 00 74 02 13  ".....t.."
>  type 3, len 8
>    03 00 00 00 00 75 02 12  ".....u.."
>  type 3, len 8
>    03 00 00 00 00 76 02 13  ".....v.."
>  type 3, len 8
>    03 00 00 00 00 77 02 12  ".....w.."
>  type 3, len 8
>    03 00 00 00 00 7e 02 14  ".....~.."
>  type 3, len 8
>    03 00 00 00 05 00 02 12  "........"
>  type 3, len 8
>    03 00 00 00 05 01 02 13  "........"
>  type 3, len 8
>    03 00 00 00 05 02 02 10  "........"
>  type 3, len 8
>    03 00 00 00 05 03 02 11  "........"
>  type 3, len 8
>    03 00 00 00 01 00 02 10  "........"
>  type 3, len 8
>    03 00 00 00 01 01 02 11  "........"
>  type 3, len 8
>    03 00 00 00 01 02 02 12  "........"
>  type 3, len 8
>    03 00 00 00 01 03 02 13  "........"
>  type 3, len 8
>    03 00 00 00 03 00 02 10  "........"
>  type 3, len 8
>    03 00 00 00 03 01 02 11  "........"
>  type 3, len 8
>    03 00 00 00 03 02 02 12  "........"
>  type 3, len 8
>    03 00 00 00 03 03 02 13  "........"
>  type 3, len 8
>    03 00 00 00 04 00 02 11  "........"
>  type 3, len 8
>    03 00 00 00 04 01 02 12  "........"
>  type 3, len 8
>    03 00 00 00 04 02 02 13  "........"
>  type 3, len 8
>    03 00 00 00 04 03 02 10  "........"
>  type 3, len 8
>    03 00 00 00 02 04 03 00  "........"
>  type 3, len 8
>    03 00 00 00 02 05 03 01  "........"
>  type 3, len 8
>    03 00 00 00 02 06 03 02  "........"
>  type 3, len 8
>    03 00 00 00 02 07 03 03  "........"
>  type 3, len 8
>    03 00 00 00 02 08 03 03  "........"
>  type 3, len 8
>    03 00 00 00 02 09 03 02  "........"
>  type 3, len 8
>    03 00 00 00 02 0a 03 01  "........"
>  type 3, len 8
>    03 00 00 00 02 0b 03 00  "........"
>  type 3, len 8
>    03 00 00 00 07 00 02 11  "........"
>  type 3, len 8
>    03 00 00 00 07 01 02 12  "........"
>  type 3, len 8
>    03 00 00 00 07 02 02 13  "........"
>  type 3, len 8
>    03 00 00 00 07 03 02 10  "........"
>  type 4, len 8
>    04 03 05 00 08 00 ff 00  "........"
>  type 4, len 8
>    04 01 05 00 08 00 ff 01  "........"
>----- BIOS data 0x00400 - 0x004ff -----
>  400  f8 03 00 00 00 00 00 00 78 03 00 00 00 00 c0 9f  "........x......."
>  410  27 42 f0 7f 02 00 00 20 00 00 2e 00 2e 00 20 39  "'B..... ...... 9"
>  420  64 20 68 23 63 2e 70 19 3d 0d 31 02 0d 1c 69 17  "d h#c.p.=.1...i."
>  430  63 2e 65 12 3d 0d 65 12 74 14 68 23 30 0b 00 00  "c.e.=.e.t.h#0..."
>  440  e9 01 ff 01 00 00 00 e0 c4 43 64 00 ff ff 00 00  ".........Cd....."
>  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  00 00 00 d4 03 29 30 03 00 80 c9 00 dc 21 04 00  ".....)0......!.."
>  470  00 00 00 00 00 02 08 00 14 14 14 14 01 01 01 01  "................"
>  480  1e 00 3e 00 24 10 00 60 09 11 08 c0 58 60 00 07  "..>.$..`....X`.."
>  490  07 00 00 00 00 00 00 12 a0 00 40 00 48 fc ff ff  "..........@.H..."
>  4a0  80 00 00 00 00 00 00 00 59 00 00 c0 00 00 00 00  "........Y......."
>  4b0  00 00 00 00 00 31 00 00 00 00 00 00 00 00 00 00  ".....1.........."
>  4c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- BIOS data end -----
>----- EBDA 0x9fc00 - 0x9ffff -----
>  9fc00  01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc20  00 00 00 00 00 00 00 42 00 00 aa fa 00 00 00 00  ".......B........"
>  9fc30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc70  13 40 82 00 2b 2b 05 00 00 00 00 00 00 00 04 00  ".@..++.........."
>  9fc80  a7 a0 3f 01 00 00 00 00 00 00 00 00 00 00 00 00  "..?............."
>  9fc90  01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fca0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fce0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fda0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fde0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fea0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9feb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fec0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fed0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fee0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fef0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffa0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffe0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fff0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- EBDA end -----
>/dev/mem[0xfe710, 16]: mmap(, 4096,,,, 0xfe000) ok
>----- MP FP 0xfe710 - 0xfe71f -----
>  fe710  5f 4d 50 5f 00 00 0f 00 01 04 91 00 00 00 00 00  "_MP_............"
>----- MP FP end -----
>/dev/mem[0xf0000, 528]: mmap(, 4096,,,, 0xf0000) ok
>----- MP config table 0xf0000 - 0xf020f -----
>  f0000  50 43 4d 50 10 02 04 c3 44 45 4c 4c 20 20 20 20  "PCMP....DELL    "
>  f0010  50 45 20 30 31 38 35 20 20 20 20 20 00 00 00 00  "PE 0185     ...."
>  f0020  00 00 3b 00 00 00 e0 fe 00 00 00 00 00 00 14 03  "..;............."
>  f0030  41 0f 00 00 ff fb eb bf 00 00 00 00 00 00 00 00  "A..............."
>  f0040  01 00 50 43 49 20 20 20 01 01 50 43 49 20 20 20  "..PCI   ..PCI   "
>  f0050  01 02 50 43 49 20 20 20 01 03 50 43 49 20 20 20  "..PCI   ..PCI   "
>  f0060  01 04 50 43 49 20 20 20 01 05 50 43 49 20 20 20  "..PCI   ..PCI   "
>  f0070  01 06 50 43 49 20 20 20 01 07 50 43 49 20 20 20  "..PCI   ..PCI   "
>  f0080  01 08 49 53 41 20 20 20 02 02 20 01 00 00 c0 fe  "..ISA   .. ....."
>  f0090  02 03 20 01 00 00 c8 fe 03 03 05 00 08 00 02 00  ".. ............."
>  f00a0  03 00 00 00 08 01 02 01 03 00 00 00 08 00 02 02  "................"
>  f00b0  03 00 00 00 08 04 02 04 03 00 00 00 08 06 02 06  "................"
>  f00c0  03 00 00 00 08 07 02 07 03 00 00 00 08 08 02 08  "................"
>  f00d0  03 00 00 00 08 09 02 09 03 00 00 00 08 0c 02 0c  "................"
>  f00e0  03 00 00 00 08 0e 02 0e 03 00 00 00 08 0f 02 0f  "................"
>  f00f0  03 00 00 00 00 08 02 10 03 00 00 00 00 74 02 13  ".............t.."
>  f0100  03 00 00 00 00 75 02 12 03 00 00 00 00 76 02 13  ".....u.......v.."
>  f0110  03 00 00 00 00 77 02 12 03 00 00 00 00 7e 02 14  ".....w.......~.."
>  f0120  03 00 00 00 05 00 02 12 03 00 00 00 05 01 02 13  "................"
>  f0130  03 00 00 00 05 02 02 10 03 00 00 00 05 03 02 11  "................"
>  f0140  03 00 00 00 01 00 02 10 03 00 00 00 01 01 02 11  "................"
>  f0150  03 00 00 00 01 02 02 12 03 00 00 00 01 03 02 13  "................"
>  f0160  03 00 00 00 03 00 02 10 03 00 00 00 03 01 02 11  "................"
>  f0170  03 00 00 00 03 02 02 12 03 00 00 00 03 03 02 13  "................"
>  f0180  03 00 00 00 04 00 02 11 03 00 00 00 04 01 02 12  "................"
>  f0190  03 00 00 00 04 02 02 13 03 00 00 00 04 03 02 10  "................"
>  f01a0  03 00 00 00 02 04 03 00 03 00 00 00 02 05 03 01  "................"
>  f01b0  03 00 00 00 02 06 03 02 03 00 00 00 02 07 03 03  "................"
>  f01c0  03 00 00 00 02 08 03 03 03 00 00 00 02 09 03 02  "................"
>  f01d0  03 00 00 00 02 0a 03 01 03 00 00 00 02 0b 03 00  "................"
>  f01e0  03 00 00 00 07 00 02 11 03 00 00 00 07 01 02 12  "................"
>  f01f0  03 00 00 00 07 02 02 13 03 00 00 00 07 03 02 10  "................"
>  f0200  04 03 05 00 08 00 ff 00 04 01 05 00 08 00 ff 01  "................"
>----- MP config table end -----
>>> bios.4: vbe
>  klog: pci config type 1
>/dev/mem[0xc0000, 3]: mmap(, 4096,,,, 0xc0000) ok
>/dev/mem[0xc0000, 37888]: mmap(, 40960,,,, 0xc0000) ok
>vbe: BIOS chksum wrong
>/dev/mem[0x0, 4096]: mmap(, 4096,,,, 0x0) ok
>  vbe: int 10h points to c000:0014: e9 b9 14 fb 40 00 b0 0a
>>> bios.4.1: vbe info
>vm86: using CPU emulation
>>> bios.5: 32
>  bios32: valid SD header at 0xffe80 (size 0x10, rev 0), SD at 0xffe90
>>> sys.1: cpu
>  vmware check: 0
>>> misc.9: kernel log
>----- kernel log -----
>  <5>Linux version 2.6.13-8-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 6 12:59:22 UTC 2005
>  <6>BIOS-provided physical RAM map:
>  <4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>  <4> BIOS-e820: 0000000000100000 - 00000000cf7c0000 (usable)
>  <4> BIOS-e820: 00000000cf7c0000 - 00000000cf7cfc00 (ACPI data)
>  <4> BIOS-e820: 00000000cf7cfc00 - 00000000cf7ff000 (reserved)
>  <4> BIOS-e820: 00000000cf800000 - 00000000d0000000 (reserved)
>  <4> BIOS-e820: 00000000e0000000 - 00000000fed00400 (reserved)
>  <4> BIOS-e820: 00000000fed13000 - 00000000feda0000 (reserved)
>  <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
>  <4> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>  <5>2423MB HIGHMEM available.
>  <5>896MB LOWMEM available.
>  <6>found SMP MP-table at 000fe710
>  <7>On node 0 totalpages: 849856
>  <7>  DMA zone: 4096 pages, LIFO batch:1
>  <7>  Normal zone: 225280 pages, LIFO batch:31
>  <7>  HighMem zone: 620480 pages, LIFO batch:31
>  <6>DMI 2.3 present.
>  <7>ACPI: RSDP (v000 DELL                                  ) @ 0x000fd6c0
>  <7>ACPI: RSDT (v001 DELL   PE800    0x00000001 MSFT 0x0100000a) @ 0x000fd6d4
>  <7>ACPI: FADT (v001 DELL   PE800    0x00000001 MSFT 0x0100000a) @ 0x000fd708
>  <7>ACPI: MADT (v001 DELL   PE800    0x00000001 MSFT 0x0100000a) @ 0x000fd77c
>  <7>ACPI: SPCR (v001 DELL   PE800    0x00000001 MSFT 0x0100000a) @ 0x000fd7f0
>  <7>ACPI: HPET (v001 DELL   PE800    0x00000001 MSFT 0x0100000a) @ 0x000fd840
>  <7>ACPI: DSDT (v001 DELL   PE800    0x00000001 MSFT 0x0100000e) @ 0x00000000
>  <6>ACPI: PM-Timer IO Port: 0x808
>  <6>ACPI: local apic disabled
>  <6>Intel MultiProcessor Specification v1.4
>  <6>    Virtual Wire compatibility mode.
>  <6>OEM ID: DELL     Product ID: PE 0185      APIC at: 0xFEE00000
>  <4>Processor #0 15:4 APIC version 20
>  <6>I/O APIC #2 Version 32 at 0xFEC00000.
>  <6>I/O APIC #3 Version 32 at 0xFEC80000.
>  <6>Processors: 1
>  <4>Allocating PCI resources starting at d0000000 (gap: d0000000:10000000)
>  <4>Built 1 zonelists
>  <5>Kernel command line: BOOT_IMAGE=linux initrd=initrd splash=silent vga=0x314 install=ftp://147.2.142.117/install/slp10/CD1 netdevice=eth0 dhcp=1
>  <6>bootsplash: silent mode.
>  <6>Initializing CPU#0
>  <4>PID hash table entries: 4096 (order: 12, 65536 bytes)
>  <4>Detected 3200.980 MHz processor.
>  <6>Using pmtmr for high-res timesource
>  <4>Console: colour dummy device 80x25
>  <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>  <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>  <6>Memory: 3360304k/3399424k available (2028k kernel code, 37868k reserved, 696k data, 204k init, 2481920k highmem)
>  <4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>  <4>Calibrating delay using timer specific routine.. 6407.78 BogoMIPS (lpj=12815576)
>  <6>Security Framework v1.0.0 initialized
>  <6>SELinux:  Disabled at boot.
>  <4>Mount-cache hash table entries: 512
>  <7>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
>  <7>CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
>  <4>monitor/mwait feature present.
>  <4>using mwait in idle threads.
>  <6>CPU: Trace cache: 12K uops, L1 D cache: 16K
>  <6>CPU: L2 cache: 1024K
>  <7>CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000641d 00000000 00000000
>  <6>Intel machine check architecture supported.
>  <6>Intel machine check reporting enabled on CPU#0.
>  <6>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>  <6>CPU0: Thermal monitoring enabled
>  <6>mtrr: v2.0 (20020519)
>  <4>CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
>  <6>Enabling fast FPU save and restore... done.
>  <6>Enabling unmasked SIMD FPU exception support... done.
>  <6>Checking 'hlt' instruction... OK.
>  <6>checking if image is initramfs... it is
>  <6>Freeing initrd memory: 7079k freed
>  <6>ACPI: Looking for DSDT in initrd... not found!
>  <4> not found!
>  <4>ACPI: setting ELCR to 0200 (from 0c28)
>  <6>NET: Registered protocol family 16
>  <6>ACPI: bus type pci registered
>  <6>PCI: PCI BIOS revision 2.10 entry at 0xfc10e, last bus=7
>  <6>PCI: Using configuration type 1
>  <6>ACPI: Subsystem revision 20050408
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: Using PIC for interrupt routing
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <4>PCI: Probing PCI hardware (bus 00)
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>  <7>Boot video device is 0000:00:02.0
>  <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>  <4>PCI: PXH quirk detected, disabling MSI for SHPC device
>  <6>PCI: Transparent bridge - 0000:00:1e.0
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PES1._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP0._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP0.PXHA._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP1._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP2._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEP3._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT]
>  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
>  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12)
>  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12)
>  <4>ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12)
>  <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
>  <6>Linux Plug and Play Support v0.97 (c) Adam Belay
>  <6>pnp: PnP ACPI init
>  <6>pnp: PnP ACPI: found 12 devices
>  <6>PCI: Using ACPI for IRQ routing
>  <6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>  <4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>  <6>PCI: Bridge: 0000:01:00.0
>  <6>  IO window: disabled.
>  <6>  MEM window: disabled.
>  <6>  PREFETCH window: disabled.
>  <6>PCI: Bridge: 0000:00:01.0
>  <6>  IO window: disabled.
>  <6>  MEM window: dfe00000-dfefffff
>  <6>  PREFETCH window: disabled.
>  <6>PCI: Bridge: 0000:00:1c.0
>  <6>  IO window: disabled.
>  <6>  MEM window: disabled.
>  <6>  PREFETCH window: disabled.
>  <6>PCI: Bridge: 0000:00:1c.1
>  <6>  IO window: disabled.
>  <6>  MEM window: disabled.
>  <6>  PREFETCH window: disabled.
>  <6>PCI: Bridge: 0000:00:1c.2
>  <6>  IO window: e000-efff
>  <6>  MEM window: dfc00000-dfdfffff
>  <6>  PREFETCH window: disabled.
>  <6>PCI: Bridge: 0000:00:1c.3
>  <6>  IO window: disabled.
>  <6>  MEM window: disabled.
>  <6>  PREFETCH window: disabled.
>  <6>PCI: Bridge: 0000:00:1e.0
>  <6>  IO window: disabled.
>  <6>  MEM window: disabled.
>  <6>  PREFETCH window: disabled.
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>  <4>PCI: setting IRQ 11 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>  <7>PCI: Setting latency timer of device 0000:00:01.0 to 64
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <7>PCI: Setting latency timer of device 0000:01:00.0 to 64
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>  <4>PCI: setting IRQ 10 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>  <6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>  <7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <4>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
>  <6>ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
>  <4>PCI: setting IRQ 9 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
>  <7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>  <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>  <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>  <6>pnp: 00:09: ioport range 0x800-0x87f could not be reserved
>  <6>pnp: 00:09: ioport range 0x880-0x8bf has been reserved
>  <6>pnp: 00:09: ioport range 0x8c0-0x8df has been reserved
>  <6>pnp: 00:09: ioport range 0xc00-0xc0f has been reserved
>  <6>pnp: 00:09: ioport range 0xc10-0xc1f has been reserved
>  <6>pnp: 00:09: ioport range 0xca0-0xcaf has been reserved
>  <6>pnp: 00:09: ioport range 0xc20-0xc3f has been reserved
>  <6>apm: BIOS not found.
>  <6>audit: initializing netlink socket (disabled)
>  <4>audit(1126498080.468:1): initialized
>  <4>highmem bounce pool size: 64 pages
>  <4>Total HugeTLB memory allocated, 0
>  <5>VFS: Disk quotas dquot_6.5.1
>  <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>  <6>Initializing Cryptographic API
>  <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>  <7>PCI: Setting latency timer of device 0000:00:01.0 to 64
>  <4>assign_interrupt_mode Found MSI capability
>  <7>Allocate Port Service[pcie00]
>  <6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>  <4>assign_interrupt_mode Found MSI capability
>  <7>Allocate Port Service[pcie00]
>  <7>Allocate Port Service[pcie02]
>  <6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>  <7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>  <4>assign_interrupt_mode Found MSI capability
>  <7>Allocate Port Service[pcie00]
>  <7>Allocate Port Service[pcie02]
>  <6>ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>  <4>assign_interrupt_mode Found MSI capability
>  <7>Allocate Port Service[pcie00]
>  <6>ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
>  <7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>  <4>assign_interrupt_mode Found MSI capability
>  <7>Allocate Port Service[pcie00]
>  <6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 7872k
>  <6>vesafb: mode is 800x600x16, linelength=1600, pages=7
>  <6>vesafb: protected mode interface info at 00ff:44f0
>  <6>vesafb: scrolling: redraw
>  <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>  <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 51518 bytes,<6>...found (800x600, 8809 bytes, v3).
>  <4>Console: switching to colour frame buffer device 99x34
>  <6>fb0: VESA VGA frame buffer device
>  <6>isapnp: Scanning for PnP cards...
>  <6>isapnp: No Plug & Play device found
>  <6>Real Time Clock Driver v1.12
>  <4>hpet_acpi_add: no address or irqs in _CRS
>  <6>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered
>  <6>Floppy drive(s): fd0 is 1.44M
>  <6>FDC 0 is a National Semiconductor PC87306
>  <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>  <6>loop: loaded (max 8 devices)
>  <6>mice: PS/2 mouse device common for all mice
>  <6>input: PC Speaker
>  <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>  <6>md: bitmap version 3.38
>  <6>NET: Registered protocol family 2
>  <4>IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
>  <4>TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
>  <4>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>  <6>TCP: Hash tables configured (established 524288 bind 65536)
>  <6>TCP reno registered
>  <6>NET: Registered protocol family 1
>  <4>Using IPI Shortcut mode
>  <4>ACPI wakeup devices: 
>  <4>PCI0 PES1 PEP0 PXHA PEP1 PEP2 PEP3 PCIS 
>  <6>ACPI: (supports S0 S4 S5)
>  <6>Freeing unused kernel memory: 204k freed
>  <6>input: AT Translated Set 2 keyboard on isa0060/serio0
>  <6>input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
>  <6>Non-volatile memory driver v1.2
>  <6>NET: Registered protocol family 17
>  <5>SCSI subsystem initialized
>  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>bootsplash: status on console 0 changed to on
>  <6>usbcore: registered new driver usbfs
>  <6>usbcore: registered new driver hub
>  <6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>  <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>  <6>ehci_hcd 0000:00:1d.7: debug port 1
>  <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>  <6>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xdffc0400
>  <7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>  <6>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>  <6>hub 1-0:1.0: USB hub found
>  <6>hub 1-0:1.0: 8 ports detected
>  <6>usbcore: registered new driver hiddev
>  <6>usbcore: registered new driver usbhid
>  <6>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>  <6>USB Universal Host Controller Interface driver v2.3
>  <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>  <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>  <6>uhci_hcd 0000:00:1d.0: irq 10, io base 0x0000dcc0
>  <6>hub 2-0:1.0: USB hub found
>  <6>hub 2-0:1.0: 2 ports detected
>  <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>  <4>PCI: setting IRQ 5 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>  <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>  <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>  <6>uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000dca0
>  <6>hub 3-0:1.0: USB hub found
>  <6>hub 3-0:1.0: 2 ports detected
>  <6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>  <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>  <6>uhci_hcd 0000:00:1d.2: irq 10, io base 0x0000dc80
>  <6>hub 4-0:1.0: USB hub found
>  <6>hub 4-0:1.0: 2 ports detected
>  <6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>  <7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>  <6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>  <6>uhci_hcd 0000:00:1d.3: irq 5, io base 0x0000dc60
>  <6>hub 5-0:1.0: USB hub found
>  <6>hub 5-0:1.0: 2 ports detected
>  <6>Initializing USB Mass Storage driver...
>  <6>usbcore: registered new driver usb-storage
>  <6>USB Mass Storage support registered.
>  <6>ACPI: CPU0 (power states: C1[C1])
>  <4>    ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x2
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>ICH6: IDE controller at PCI slot 0000:00:1f.1
>  <4>    ACPI-0402: *** Warning: Unable to derive IRQ for device 0000:00:1f.1
>  <4>ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
>  <6>ICH6: chipset revision 3
>  <6>ICH6: not 100% native mode: will probe irqs later
>  <6>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>  <7>Probing IDE interface ide0...
>  <4>hda: HL-DT-ST RW/DVD GCC-4481B, ATAPI CD/DVD-ROM drive
>  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  <6>hda: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>  <6>Uniform CD-ROM driver Revision: 3.20
>  <7>libata version 1.12 loaded.
>  <7>ahci version 1.01
>  <4>    ACPI-0402: *** Warning: Unable to derive IRQ for device 0000:00:1f.2
>  <4>ACPI: PCI Interrupt 0000:00:1f.2[C]: no GSI - using IRQ 3
>  <4>PCI: setting IRQ 3 as level-triggered
>  <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>  <6>ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode
>  <6>ahci(0000:00:1f.2) flags: 64bit stag led pmp 
>  <6>ata1: SATA max UDMA/133 cmd 0xF883C100 ctl 0x0 bmdma 0x0 irq 3
>  <6>ata2: SATA max UDMA/133 cmd 0xF883C180 ctl 0x0 bmdma 0x0 irq 3
>  <6>ata3: SATA max UDMA/133 cmd 0xF883C200 ctl 0x0 bmdma 0x0 irq 3
>  <6>ata4: SATA max UDMA/133 cmd 0xF883C280 ctl 0x0 bmdma 0x0 irq 3
>  <3>irq 3: nobody cared (try booting with the "irqpoll" option)
>  <4> [<c013c17c>] __report_bad_irq+0x1c/0x70
>  <4> [<c013c26b>] note_interrupt+0x6b/0xd0
>  <4> [<c013bd0c>] __do_IRQ+0xbc/0xd0
>  <4> [<c01055e8>] do_IRQ+0x38/0x60
>  <4> [<c0103dea>] common_interrupt+0x1a/0x20
>  <4> [<c013007b>] posix_cpu_timer_schedule+0xcb/0x480
>  <4> [<c0120b91>] __do_softirq+0x31/0xa0
>  <4> [<c0120c26>] do_softirq+0x26/0x30
>  <4> [<c01055ed>] do_IRQ+0x3d/0x60
>  <4> [<c0103dea>] common_interrupt+0x1a/0x20
>  <4> [<c013bebd>] setup_irq+0x5d/0xc0
>  <4> [<f8de8630>] ahci_interrupt+0x0/0x150 [ahci]
>  <4> [<c013c033>] request_irq+0x83/0xa0
>  <4> [<f8dc1de2>] ata_device_add+0x1b2/0x270 [libata]
>  <4> [<f8de8e8d>] ahci_init_one+0x17d/0x270 [ahci]
>  <4> [<c0255b90>] __driver_attach+0x0/0x40
>  <4> [<c01f9c40>] __pci_device_probe+0x30/0x40
>  <4> [<c01f9c6e>] pci_device_probe+0x1e/0x40
>  <4> [<c0255acf>] driver_probe_device+0x2f/0x90
>  <4> [<c0255bc9>] __driver_attach+0x39/0x40
>  <4> [<c0255338>] bus_for_each_dev+0x38/0x60
>  <4> [<c0255be1>] driver_attach+0x11/0x20
>  <4> [<c0255b90>] __driver_attach+0x0/0x40
>  <4> [<c025573a>] bus_add_driver+0x5a/0xa0
>  <4> [<c01f9e28>] pci_register_driver+0x58/0x80
>  <4> [<c0134161>] sys_init_module+0xa1/0x180
>  <4> [<c0102d79>] syscall_call+0x7/0xb
>  <3>handlers:
>  <3>[<f8de8630>] (ahci_interrupt+0x0/0x150 [ahci])
>  <0>Disabling IRQ #3
>  <4>ata1 is slow to respond, please be patient
>  <3>ata1 failed to respond (30 secs)
>  <6>scsi0 : ahci
>  <4>ata2 is slow to respond, please be patient
>  <3>ata2 failed to respond (30 secs)
>  <6>scsi1 : ahci
>  <6>ata3: no device found (phy stat 00000000)
>  <6>scsi2 : ahci
>  <6>ata4: no device found (phy stat 00000000)
>  <6>scsi3 : ahci
>  <6>tg3.c:v3.37 (August 25, 2005)
>  <6>ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>  <7>PCI: Setting latency timer of device 0000:05:00.0 to 64
>  <6>eth0: Tigon3 [partno(BCM95721) rev 4001 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:11:43:fc:f7:9a
>  <6>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[1] Split[0] WireSpeed[1] TSOcap[1] 
>  <6>eth0: dma_rwctrl[76180000]
>  <6>tg3: eth0: Link is up at 100 Mbps, full duplex.
>  <6>tg3: eth0: Flow control is on for TX and on for RX.
>  <7>spurious 8259A interrupt: IRQ7.
>  <6>bootsplash: status on console 0 changed to on
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>st: Version 20050501, fixed bufsize 32768, s/g segs 256
>  <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>  <6>md: Autodetecting RAID arrays.
>  <6>md: autorun ...
>  <6>md: ... autorun DONE.
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>  <4>ppa: Version 2.07 (for Linux 2.4.x)
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>md: raid0 personality registered as nr 2
>  <6>md: raid1 personality registered as nr 3
>  <6>raid5: automatically using best checksumming function: pIII_sse
>  <4>   pIII_sse  :  5200.000 MB/sec
>  <4>raid5: using function: pIII_sse (5200.000 MB/sec)
>  <6>md: raid5 personality registered as nr 4
>  <4>raid6: int32x1    962 MB/s
>  <4>raid6: int32x2    818 MB/s
>  <4>raid6: int32x4    774 MB/s
>  <4>raid6: int32x8    647 MB/s
>  <4>raid6: mmxx1     1928 MB/s
>  <4>raid6: mmxx2     2252 MB/s
>  <4>raid6: sse1x1    1131 MB/s
>  <4>raid6: sse1x2    2218 MB/s
>  <4>raid6: sse2x1    2335 MB/s
>  <4>raid6: sse2x2    3515 MB/s
>  <4>raid6: using algorithm sse2x2 (3515 MB/s)
>  <6>md: raid6 personality registered as nr 8
>  <6>md: multipath personality registered as nr 7
>  <6>md: Autodetecting RAID arrays.
>  <6>md: autorun ...
>  <6>md: ... autorun DONE.
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
>  <6>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>  <4>end_request: I/O error, dev fd0, sector 0
>  <4>end_request: I/O error, dev fd0, sector 0
>  <6>parport: PnPBIOS parport detected.
>  <6>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>  <4>ppa: Version 2.07 (for Linux 2.4.x)
>  <4>EXT2-fs warning: checktime reached, running e2fsck is recommended
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 2
>  <3>Buffer I/O error on device fd0, logical block 1
>  <4>lost page write due to I/O error on fd0
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 4
>  <3>Buffer I/O error on device fd0, logical block 2
>  <4>lost page write due to I/O error on fd0
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 6
>  <3>Buffer I/O error on device fd0, logical block 3
>  <4>lost page write due to I/O error on fd0
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 8
>  <3>Buffer I/O error on device fd0, logical block 4
>  <4>lost page write due to I/O error on fd0
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 10
>  <3>Buffer I/O error on device fd0, logical block 5
>  <4>lost page write due to I/O error on fd0
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 56
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 390
>  <3>Buffer I/O error on device fd0, logical block 195
>  <4>lost page write due to I/O error on fd0
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 366
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 374
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 382
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 392
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 12
>  <3>Buffer I/O error on device fd0, logical block 6
>  <4>lost page write due to I/O error on fd0
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 2
>  <3>Buffer I/O error on device fd0, logical block 1
>  <4>lost page write due to I/O error on fd0
>  <2>EXT2-fs error (device fd0): ext2_readdir: bad page in #2
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 2
>  <3>Buffer I/O error on device fd0, logical block 1
>  <4>lost page write due to I/O error on fd0
>  <2>EXT2-fs error (device fd0): ext2_readdir: bad page in #2
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 2
>  <3>Buffer I/O error on device fd0, logical block 1
>  <4>lost page write due to I/O error on fd0
>  <2>EXT2-fs error (device fd0): ext2_readdir: bad page in #2
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 10
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 2
>  <3>Buffer I/O error on device fd0, logical block 1
>  <4>lost page write due to I/O error on fd0
>  <2>EXT2-fs error (device fd0): ext2_get_inode: unable to read inode block - inode=2, block=5
>  <4>floppy0: disk absent or changed during operation
>  <4>end_request: I/O error, dev fd0, sector 2
>  <3>Buffer I/O error on device fd0, logical block 1
>  <4>lost page write due to I/O error on fd0
>  <4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
>  <4>EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport " -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc io=0x378 irq=none,none,none" -----
>----- return code: ? -----
>>> misc.1.3: read floppy
>  read_block0: open(/dev/fd0) failed
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>  0000-001f : dma1
>  0020-0021 : pic1
>  0040-0043 : timer0
>  0050-0053 : timer1
>  0060-006f : keyboard
>  0070-0077 : rtc
>  0080-008f : dma page reg
>  00a0-00a1 : pic2
>  00c0-00df : dma2
>  00f0-00ff : fpu
>  01f0-01f7 : ide0
>  0378-037a : parport0
>  03c0-03df : vesafb
>  03f2-03f5 : floppy
>  03f6-03f6 : ide0
>  03f7-03f7 : floppy DIR
>  03f8-03ff : serial
>  0800-0803 : PM1a_EVT_BLK
>  0804-0805 : PM1a_CNT_BLK
>  0808-080b : PM_TMR
>  0828-082f : GPE0_BLK
>  0880-08bf : pnp 00:09
>  08c0-08df : 0000:00:1f.3
>    08c0-08df : pnp 00:09
>  0c00-0c0f : pnp 00:09
>  0c10-0c1f : pnp 00:09
>  0c20-0c3f : pnp 00:09
>  0ca0-0caf : pnp 00:09
>  0cf8-0cff : PCI conf1
>  1000-1007 : 0000:00:02.0
>  dc40-dc4f : 0000:00:1f.2
>    dc40-dc4f : ahci
>  dc58-dc5f : 0000:00:1f.2
>    dc58-dc5f : ahci
>  dc60-dc7f : 0000:00:1d.3
>    dc60-dc7f : uhci_hcd
>  dc80-dc9f : 0000:00:1d.2
>    dc80-dc9f : uhci_hcd
>  dca0-dcbf : 0000:00:1d.1
>    dca0-dcbf : uhci_hcd
>  dcc0-dcdf : 0000:00:1d.0
>    dcc0-dcdf : uhci_hcd
>  dce0-dce3 : 0000:00:1f.2
>    dce0-dce3 : ahci
>  dce8-dceb : 0000:00:1f.2
>    dce8-dceb : ahci
>  dcf0-dcf7 : 0000:00:1f.2
>    dcf0-dcf7 : ahci
>  e000-efff : PCI Bus #05
>  fc00-fc0f : 0000:00:1f.1
>    fc00-fc07 : ide0
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>    0:     203683          XT-PIC  timer
>    1:        994          XT-PIC  i8042
>    2:          0          XT-PIC  cascade
>    3:     100000          XT-PIC  libata
>    4:         60          XT-PIC  serial
>    5:      70325          XT-PIC  uhci_hcd:usb3, uhci_hcd:usb5, eth0
>    6:         79          XT-PIC  floppy
>    8:          3          XT-PIC  rtc
>    9:          1          XT-PIC  acpi
>   10:          0          XT-PIC  ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb4
>   12:       1394          XT-PIC  i8042
>   14:       1588          XT-PIC  ide0
>  NMI:          0 
>  LOC:          0 
>  ERR:          1
>  MIS:          0
>----- /proc/interrupts end -----
>----- /proc/dma -----
>   2: floppy
>   4: cascade
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 15
>  model		: 4
>  model name	: Intel(R) Pentium(R) 4 CPU 3.20GHz
>  stepping	: 1
>  cpu MHz		: 3200.980
>  cache size	: 1024 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 5
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm pni monitor ds_cpl cid cx16 xtpr
>  bogomips	: 6407.78
>  
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0x38000000
>  klog mem 0: 0xcd18c000
>  klog mem 1: 0x0
>  klog mem:   0xcd18c000
> -- <4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> -- <4> BIOS-e820: 0000000000100000 - 00000000cf7c0000 (usable)
> -- <4> BIOS-e820: 00000000cf7c0000 - 00000000cf7cfc00 (ACPI data)
> -- <4> BIOS-e820: 00000000cf7cfc00 - 00000000cf7ff000 (reserved)
> -- <4> BIOS-e820: 00000000cf800000 - 00000000d0000000 (reserved)
> -- <4> BIOS-e820: 00000000e0000000 - 00000000fed00400 (reserved)
> -- <4> BIOS-e820: 00000000fed13000 - 00000000feda0000 (reserved)
> -- <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> -- <4> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> -- <5>2423MB HIGHMEM available.
>  bios mem:   0xcf760000
>  meminfo:    0xcd982000
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0x6723cfbe9c17f348) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>        PIIX_IDE: /devices/pci0000:00/0000:00:1f.1
>            ahci: /devices/pci0000:00/0000:00:1f.2
>        ehci_hcd: /devices/pci0000:00/0000:00:1d.7
> pcieport-driver: /devices/pci0000:00/0000:00:01.0
> pcieport-driver: /devices/pci0000:00/0000:00:1c.0
> pcieport-driver: /devices/pci0000:00/0000:00:1c.1
> pcieport-driver: /devices/pci0000:00/0000:00:1c.2
> pcieport-driver: /devices/pci0000:00/0000:00:1c.3
>             tg3: /devices/pci0000:00/0000:00:1c.2/0000:05:00.0
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.0
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.1
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.2
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.3
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>       i8042 aux: /devices/pnp0/00:06
>       i8042 kbd: /devices/pnp0/00:05
>          serial: /devices/pnp0/00:07
>          system: /devices/pnp0/00:09
>          system: /devices/pnp0/00:0a
>           atkbd: /devices/platform/i8042/serio1
>         psmouse: /devices/platform/i8042/serio0
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0
>             hub: /module/usbcore
>     usb-storage: /module/usb_storage
>           usbfs: /module/usbcore
>          usbhid: /module/usbhid
>             usb: /devices/pci0000:00/0000:00:1d.7/usb1
>             usb: /devices/pci0000:00/0000:00:1d.0/usb2
>             usb: /devices/pci0000:00/0000:00:1d.1/usb3
>             usb: /devices/pci0000:00/0000:00:1d.2/usb4
>             usb: /devices/pci0000:00/0000:00:1d.3/usb5
>             usb: /module/usbcore
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:00.0
>    modalias = "pci:v00008086d00002588sv00001028sd00000185bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x8086
>    device = 0x2588
>    subvendor = 0x1028
>    subdevice = 0x185
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0
>    modalias = "pci:v00008086d00002589sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x2589
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 65
>    config[64]
>  pci device: name = 0000:00:02.0, bus_id = 0000:00:02.0, bus = pci
>    path = /devices/pci0000:00/0000:00:02.0
>    modalias = "pci:v00008086d0000258Asv00001028sd00000185bc03sc00i00
>"
>    class = 0x30000
>    vendor = 0x8086
>    device = 0x258a
>    subvendor = 0x1028
>    subdevice = 0x185
>    irq = 11
>    res[0] = 0xdff00000 0xdff7ffff 0x200
>    res[1] = 0x1000 0x1007 0x101
>    res[2] = 0xd0000000 0xd7ffffff 0x1208
>    res[3] = 0xdff80000 0xdffbffff 0x200
>    config[64]
>  pci device: name = 0000:00:1c.0, bus_id = 0000:00:1c.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1c.0
>    modalias = "pci:v00008086d00002660sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x2660
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 73
>    config[64]
>  pci device: name = 0000:00:1c.1, bus_id = 0000:00:1c.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1c.1
>    modalias = "pci:v00008086d00002662sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x2662
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 81
>    config[64]
>  pci device: name = 0000:00:1c.2, bus_id = 0000:00:1c.2, bus = pci
>    path = /devices/pci0000:00/0000:00:1c.2
>    modalias = "pci:v00008086d00002664sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x2664
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 89
>    config[64]
>  pci device: name = 0000:00:1c.3, bus_id = 0000:00:1c.3, bus = pci
>    path = /devices/pci0000:00/0000:00:1c.3
>    modalias = "pci:v00008086d00002666sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x2666
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 97
>    config[64]
>  pci device: name = 0000:00:1d.0, bus_id = 0000:00:1d.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.0
>    modalias = "pci:v00008086d00002658sv00001028sd00000185bc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x2658
>    subvendor = 0x1028
>    subdevice = 0x185
>    irq = 10
>    res[4] = 0xdcc0 0xdcdf 0x101
>    config[64]
>  pci device: name = 0000:00:1d.1, bus_id = 0000:00:1d.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.1
>    modalias = "pci:v00008086d00002659sv00001028sd00000185bc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x2659
>    subvendor = 0x1028
>    subdevice = 0x185
>    irq = 5
>    res[4] = 0xdca0 0xdcbf 0x101
>    config[64]
>  pci device: name = 0000:00:1d.2, bus_id = 0000:00:1d.2, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.2
>    modalias = "pci:v00008086d0000265Asv00001028sd00000185bc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x265a
>    subvendor = 0x1028
>    subdevice = 0x185
>    irq = 10
>    res[4] = 0xdc80 0xdc9f 0x101
>    config[64]
>  pci device: name = 0000:00:1d.3, bus_id = 0000:00:1d.3, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.3
>    modalias = "pci:v00008086d0000265Bsv00001028sd00000185bc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x265b
>    subvendor = 0x1028
>    subdevice = 0x185
>    irq = 5
>    res[4] = 0xdc60 0xdc7f 0x101
>    config[64]
>  pci device: name = 0000:00:1d.7, bus_id = 0000:00:1d.7, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.7
>    modalias = "pci:v00008086d0000265Csv00001028sd00000185bc0Csc03i20
>"
>    class = 0xc0320
>    vendor = 0x8086
>    device = 0x265c
>    subvendor = 0x1028
>    subdevice = 0x185
>    irq = 10
>    res[0] = 0xdffc0400 0xdffc07ff 0x200
>    config[64]
>  pci device: name = 0000:00:1e.0, bus_id = 0000:00:1e.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0
>    modalias = "pci:v00008086d0000244Esv00000000sd00000000bc06sc04i01
>"
>    class = 0x60401
>    vendor = 0x8086
>    device = 0x244e
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.0, bus_id = 0000:00:1f.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.0
>    modalias = "pci:v00008086d00002640sv00000000sd00000000bc06sc01i00
>"
>    class = 0x60100
>    vendor = 0x8086
>    device = 0x2640
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.1, bus_id = 0000:00:1f.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.1
>    modalias = "pci:v00008086d0000266Fsv00001028sd00000185bc01sc01i8a
>"
>    class = 0x1018a
>    vendor = 0x8086
>    device = 0x266f
>    subvendor = 0x1028
>    subdevice = 0x185
>    irq = 0
>    res[4] = 0xfc00 0xfc0f 0x101
>    config[64]
>  pci device: name = 0000:00:1f.2, bus_id = 0000:00:1f.2, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.2
>    modalias = "pci:v00008086d00002652sv00008086sd00002652bc01sc01i8f
>"
>    class = 0x1018f
>    vendor = 0x8086
>    device = 0x2652
>    subvendor = 0x8086
>    subdevice = 0x2652
>    irq = 3
>    res[0] = 0xdcf0 0xdcf7 0x101
>    res[1] = 0xdce8 0xdceb 0x101
>    res[2] = 0xdc58 0xdc5f 0x101
>    res[3] = 0xdce0 0xdce3 0x101
>    res[4] = 0xdc40 0xdc4f 0x101
>    res[5] = 0xdffc0000 0xdffc03ff 0x200
>    config[64]
>  pci device: name = 0000:00:1f.3, bus_id = 0000:00:1f.3, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.3
>    modalias = "pci:v00008086d0000266Asv00001028sd00000185bc0Csc05i00
>"
>    class = 0xc0500
>    vendor = 0x8086
>    device = 0x266a
>    subvendor = 0x1028
>    subdevice = 0x185
>    irq = 0
>    res[4] = 0x8c0 0x8df 0x101
>    config[64]
>  pci device: name = 0000:01:00.0, bus_id = 0000:01:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>    modalias = "pci:v00008086d0000032Csv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x32c
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:05:00.0, bus_id = 0000:05:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1c.2/0000:05:00.0
>    modalias = "pci:v000014E4d00001659sv00001028sd00000185bc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x14e4
>    device = 0x1659
>    subvendor = 0x1028
>    subdevice = 0x185
>    irq = 5
>    res[0] = 0xdfcf0000 0xdfcfffff 0x204
>    config[64]
>---------- PCI raw data ----------
>bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:2588:1028:0185:04
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: 86 80 88 25 06 01 90 20 04 00 00 06 00 00 00 00  "...%... ........"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 85 01  "............(..."
>  30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  e0: 09 00  ".."
>
>bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 8086:2589:0000:0000:04
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 65
>  00: 86 80 89 25 47 04 10 00 04 00 04 06 10 00 01 00  "...%G..........."
>  10: 00 00 00 00 00 00 00 00 00 01 02 00 f0 00 00 20  "............... "
>  20: e0 df e0 df f0 ff 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 88 00 00 00 00 00 00 00 00 01 07 00  "................"
>
>bus 00, slot 02, func 0, vend:dev:s_vend:s_dev:rev 8086:258a:1028:0185:04
>class 03, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 11
>  addr0 dff00000, size 00080000
>  addr1 00001000, size 00000008
>  addr2 d0000000, size 08000000
>  addr3 dff80000, size 00040000
>  00: 86 80 8a 25 07 00 90 00 04 00 00 03 00 00 00 00  "...%............"
>  10: 00 00 f0 df 01 10 00 00 08 00 00 d0 00 00 f8 df  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 85 01  "............(..."
>  30: 00 00 00 00 d0 00 00 00 00 00 00 00 0b 01 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 01 00  ".."
>
>bus 00->03, slot 1c, func 0, vend:dev:s_vend:s_dev:rev 8086:2660:0000:0000:03
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 73
>  00: 86 80 60 26 07 04 10 00 03 00 04 06 10 00 81 00  "..`&............"
>  10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20  "............... "
>  20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 06 00  "....@..........."
>
>bus 00->04, slot 1c, func 1, vend:dev:s_vend:s_dev:rev 8086:2662:0000:0000:03
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 81
>  00: 86 80 62 26 47 04 10 00 03 00 04 06 10 00 81 00  "..b&G..........."
>  10: 00 00 00 00 00 00 00 00 00 04 04 00 f0 00 00 20  "............... "
>  20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 00 02 07 00  "....@..........."
>
>bus 00->05, slot 1c, func 2, vend:dev:s_vend:s_dev:rev 8086:2664:0000:0000:03
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 89
>  00: 86 80 64 26 47 04 10 00 03 00 04 06 10 00 81 00  "..d&G..........."
>  10: 00 00 00 00 00 00 00 00 00 05 05 00 e0 e0 00 00  "................"
>  20: c0 df d0 df f1 ff 01 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 00 03 07 00  "....@..........."
>
>bus 00->06, slot 1c, func 3, vend:dev:s_vend:s_dev:rev 8086:2666:0000:0000:03
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 97
>  00: 86 80 66 26 47 04 10 00 03 00 04 06 10 00 81 00  "..f&G..........."
>  10: 00 00 00 00 00 00 00 00 00 06 06 00 f0 00 00 20  "............... "
>  20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 00 04 07 00  "....@..........."
>
>bus 00, slot 1d, func 0, vend:dev:s_vend:s_dev:rev 8086:2658:1028:0185:03
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 10
>  addr4 0000dcc0, size 00000020
>  00: 86 80 58 26 05 00 80 02 03 00 03 0c 00 00 80 00  "..X&............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: c1 dc 00 00 00 00 00 00 00 00 00 00 28 10 85 01  "............(..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00  "................"
>
>bus 00, slot 1d, func 1, vend:dev:s_vend:s_dev:rev 8086:2659:1028:0185:03
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 5
>  addr4 0000dca0, size 00000020
>  00: 86 80 59 26 05 00 80 02 03 00 03 0c 00 00 00 00  "..Y&............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: a1 dc 00 00 00 00 00 00 00 00 00 00 28 10 85 01  "............(..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00  "................"
>
>bus 00, slot 1d, func 2, vend:dev:s_vend:s_dev:rev 8086:265a:1028:0185:03
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 10
>  addr4 0000dc80, size 00000020
>  00: 86 80 5a 26 05 00 80 02 03 00 03 0c 00 00 00 00  "..Z&............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 81 dc 00 00 00 00 00 00 00 00 00 00 28 10 85 01  "............(..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 03 00 00  "................"
>
>bus 00, slot 1d, func 3, vend:dev:s_vend:s_dev:rev 8086:265b:1028:0185:03
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 5
>  addr4 0000dc60, size 00000020
>  00: 86 80 5b 26 05 00 80 02 03 00 03 0c 00 00 00 00  "..[&............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 61 dc 00 00 00 00 00 00 00 00 00 00 28 10 85 01  "a...........(..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00  "................"
>
>bus 00, slot 1d, func 7, vend:dev:s_vend:s_dev:rev 8086:265c:1028:0185:03
>class 0c, sub_class 03 prog_if 20, hdr 0, flags <pm>, irq 10
>  addr0 dffc0400, size 00000400
>  00: 86 80 5c 26 06 01 90 02 03 20 03 0c 00 00 00 00  "..\&..... ......"
>  10: 00 04 fc df 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 85 01  "............(..."
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00  "....P..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 01 58 00 00 00 00 00 00 0a 00  ".X........"
>
>bus 00->07, slot 1e, func 0, vend:dev:s_vend:s_dev:rev 8086:244e:0000:0000:d3
>class 06, sub_class 04 prog_if 01, hdr 1, flags <>, irq 0
>  00: 86 80 4e 24 47 01 10 00 d3 01 04 06 00 00 01 00  "..N$G..........."
>  10: 00 00 00 00 00 00 00 00 00 07 07 20 f0 00 80 22  "........... ...""
>  20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 07 00  "....P..........."
>
>bus 00, slot 1f, func 0, vend:dev:s_vend:s_dev:rev 8086:2640:0000:0000:03
>class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0
>  00: 86 80 40 26 47 01 00 02 03 00 01 06 00 00 80 00  "..@&G..........."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 1f, func 1, vend:dev:s_vend:s_dev:rev 8086:266f:1028:0185:03
>class 01, sub_class 01 prog_if 8a, hdr 0, flags <>, irq 0
>  addr4 0000fc00, size 00000010
>  00: 86 80 6f 26 05 00 88 02 03 8a 01 01 00 00 00 00  "..o&............"
>  10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00  "................"
>  20: 01 fc 00 00 00 00 00 00 00 00 00 00 28 10 85 01  "............(..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00  "................"
>
>bus 00, slot 1f, func 2, vend:dev:s_vend:s_dev:rev 8086:2652:8086:2652:03
>class 01, sub_class 01 prog_if 8f, hdr 0, flags <pm>, irq 3
>  addr0 0000dcf0, size 00000008
>  addr1 0000dce8, size 00000004
>  addr2 0000dc58, size 00000008
>  addr3 0000dce0, size 00000004
>  addr4 0000dc40, size 00000010
>  addr5 dffc0000, size 00000400
>  00: 86 80 52 26 07 00 b8 02 03 8f 01 01 00 00 00 00  "..R&............"
>  10: f1 dc 00 00 e9 dc 00 00 59 dc 00 00 e1 dc 00 00  "........Y......."
>  20: 41 dc 00 00 00 00 fc df 00 00 00 00 86 80 52 26  "A.............R&"
>  30: 00 00 00 00 70 00 00 00 00 00 00 00 03 03 00 00  "....p..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 01 00  ".."
>
>bus 00, slot 1f, func 3, vend:dev:s_vend:s_dev:rev 8086:266a:1028:0185:03
>class 0c, sub_class 05 prog_if 00, hdr 0, flags <>, irq 0
>  addr4 000008c0, size 00000020
>  00: 86 80 6a 26 01 00 80 02 03 00 05 0c 00 00 00 00  "..j&............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: c1 08 00 00 00 00 00 00 00 00 00 00 28 10 85 01  "............(..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00  "................"
>
>bus 01->02, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:032c:0000:0000:09
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 86 80 2c 03 47 00 10 00 09 00 04 06 10 00 81 00  "..,.G..........."
>  10: 00 00 00 00 00 00 00 00 01 02 02 40 f0 00 a0 22  "...........@...""
>  20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 07 00  "....D..........."
>
>bus 05, slot 00, func 0, vend:dev:s_vend:s_dev:rev 14e4:1659:1028:0185:01
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 5
>  addr0 dfcf0000, size 00010000
>  00: e4 14 59 16 06 00 10 00 01 00 00 02 10 00 00 00  "..Y............."
>  10: 04 00 cf df 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 07 00 00 00 28 10 85 01  "............(..."
>  30: 00 00 00 00 48 00 00 00 00 00 00 00 05 01 00 00  "....H..........."
>  40: 00 00 00 00 00 00 00 00 01 50 00 00 00 00 00 00  ".........P......"
>  50: 03 58 00 00 00 00 00 00 05 d0 00 00 00 00 00 00  ".X.............."
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 10 00  ".."
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> monitor.1: ddc
>>> isapnp.1: pnp devices
>  pnp device: name = 00:00, bus_id = 00:00, bus = pnp
>    path = /devices/pnp0/00:00
>    id = PNP 0200
>  pnp device: name = 00:01, bus_id = 00:01, bus = pnp
>    path = /devices/pnp0/00:01
>    id = PNP 0c04
>  pnp device: name = 00:02, bus_id = 00:02, bus = pnp
>    path = /devices/pnp0/00:02
>    id = PNP 0800
>  pnp device: name = 00:03, bus_id = 00:03, bus = pnp
>    path = /devices/pnp0/00:03
>    id = PNP 0b00
>  pnp device: name = 00:04, bus_id = 00:04, bus = pnp
>    path = /devices/pnp0/00:04
>    id = PNP 0700
>  pnp device: name = 00:05, bus_id = 00:05, bus = pnp
>    path = /devices/pnp0/00:05
>    id = PNP 0303
>  pnp device: name = 00:06, bus_id = 00:06, bus = pnp
>    path = /devices/pnp0/00:06
>    id = PNP 0f13
>  pnp device: name = 00:07, bus_id = 00:07, bus = pnp
>    path = /devices/pnp0/00:07
>    id = PNP 0501
>  pnp device: name = 00:08, bus_id = 00:08, bus = pnp
>    path = /devices/pnp0/00:08
>    id = PNP 0401
>  pnp device: name = 00:09, bus_id = 00:09, bus = pnp
>    path = /devices/pnp0/00:09
>    id = PNP 0c01
>  pnp device: name = 00:0a, bus_id = 00:0a, bus = pnp
>    path = /devices/pnp0/00:0a
>    id = PNP 0c02
>  pnp device: name = 00:0b, bus_id = 00:0b, bus = pnp
>    path = /devices/pnp0/00:0b
>    id = PNP 0103
>>> isa.1: isdn
>---------- ISA ISDN raw data ----------
>---------- ISA ISDN raw data end ----------
>>> isa.1.1: isdn
>>> pcmcia.1: sysfs drivers
>>> pcmcia.2: pcmcia
>sysfs: no such bus: pcmcia
>>> pcmcia.3: pcmcia ctrl
>sysfs: no such class: pcmcia_socket
>>> serial.1: read info
>----- /proc/tty/driver/serial -----
>  0: uart:16550A port:000003F8 irq:4 tx:166 rx:0
>  1: uart:unknown port:000002F8 irq:3
>  2: uart:unknown port:000003E8 irq:4
>  3: uart:unknown port:000002E8 irq:3
>----- /proc/tty/driver/serial end -----
>----- serial info -----
>  uart 16550A, line 0, port 0x3f8, irq 4, baud 0
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>i/o:1 0x0000 - 0x001f (0x20) "dma1"
>i/o:1 0x0020 - 0x0021 (0x02) "pic1"
>i/o:0 0x0040 - 0x0043 (0x04) "timer0"
>i/o:0 0x0050 - 0x0053 (0x04) "timer1"
>i/o:1 0x0060 - 0x006f (0x10) "keyboard"
>i/o:1 0x0070 - 0x0077 (0x08) "rtc"
>i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
>i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
>i/o:1 0x00c0 - 0x00df (0x20) "dma2"
>i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
>i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
>i/o:1 0x0378 - 0x037a (0x03) "parport0"
>i/o:1 0x03c0 - 0x03df (0x20) "vesafb"
>i/o:1 0x03f2 - 0x03f5 (0x04) "floppy"
>i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
>i/o:1 0x03f7 - 0x03f7 (0x01) "floppy DIR"
>i/o:1 0x03f8 - 0x03ff (0x08) "serial"
>i/o:0 0x0800 - 0x0803 (0x04) "PM1a_EVT_BLK"
>i/o:0 0x0804 - 0x0805 (0x02) "PM1a_CNT_BLK"
>i/o:0 0x0808 - 0x080b (0x04) "PM_TMR"
>i/o:0 0x0828 - 0x082f (0x08) "GPE0_BLK"
>i/o:0 0x0880 - 0x08bf (0x40) "pnp 00:09"
>i/o:0 0x08c0 - 0x08df (0x20) "0000:00:1f.3"
>i/o:0 0x08c0 - 0x08df (0x20) "pnp 00:09"
>i/o:0 0x0c00 - 0x0c0f (0x10) "pnp 00:09"
>i/o:0 0x0c10 - 0x0c1f (0x10) "pnp 00:09"
>i/o:0 0x0c20 - 0x0c3f (0x20) "pnp 00:09"
>i/o:0 0x0ca0 - 0x0caf (0x10) "pnp 00:09"
>i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
>i/o:0 0x1000 - 0x1007 (0x08) "0000:00:02.0"
>i/o:0 0xdc40 - 0xdc4f (0x10) "0000:00:1f.2"
>i/o:0 0xdc40 - 0xdc4f (0x10) "ahci"
>i/o:0 0xdc58 - 0xdc5f (0x08) "0000:00:1f.2"
>i/o:0 0xdc58 - 0xdc5f (0x08) "ahci"
>i/o:0 0xdc60 - 0xdc7f (0x20) "0000:00:1d.3"
>i/o:0 0xdc60 - 0xdc7f (0x20) "uhci_hcd"
>i/o:0 0xdc80 - 0xdc9f (0x20) "0000:00:1d.2"
>i/o:0 0xdc80 - 0xdc9f (0x20) "uhci_hcd"
>i/o:0 0xdca0 - 0xdcbf (0x20) "0000:00:1d.1"
>i/o:0 0xdca0 - 0xdcbf (0x20) "uhci_hcd"
>i/o:0 0xdcc0 - 0xdcdf (0x20) "0000:00:1d.0"
>i/o:0 0xdcc0 - 0xdcdf (0x20) "uhci_hcd"
>i/o:0 0xdce0 - 0xdce3 (0x04) "0000:00:1f.2"
>i/o:0 0xdce0 - 0xdce3 (0x04) "ahci"
>i/o:0 0xdce8 - 0xdceb (0x04) "0000:00:1f.2"
>i/o:0 0xdce8 - 0xdceb (0x04) "ahci"
>i/o:0 0xdcf0 - 0xdcf7 (0x08) "0000:00:1f.2"
>i/o:0 0xdcf0 - 0xdcf7 (0x08) "ahci"
>i/o:0 0xe000 - 0xefff (0x1000) "PCI Bus #05"
>i/o:0 0xfc00 - 0xfc0f (0x10) "0000:00:1f.1"
>i/o:1 0xfc00 - 0xfc07 (0x08) "ide0"
>irq:1  0 (   203683) "timer"
>irq:0  1 (      994) "i8042"
>irq:1  2 (        0) "cascade"
>irq:0  3 (   100000) "libata"
>irq:1  4 (       60) "serial"
>irq:0  5 (    70325) "uhci_hcd:usb3" "uhci_hcd:usb5" "eth0"
>irq:1  6 (       79) "floppy"
>irq:1  8 (        3) "rtc"
>irq:0  9 (        1) "acpi"
>irq:0 10 (        0) "ehci_hcd:usb1" "uhci_hcd:usb2" "uhci_hcd:usb4"
>irq:0 12 (     1394) "i8042"
>irq:1 14 (     1588) "ide0"
>dma:1 2 "floppy"
>dma:1 4 "cascade"
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe lp" -----
>  FATAL: Module lp not found.
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>/proc/sys/dev/parport/parport0/base-addr
>  888	1912
>/proc/sys/dev/parport/parport0/autoprobe
>----- parallel info end -----
>>> parallel.5: ppa mod
>----- exec: "/sbin/modprobe ppa " -----
>----- return code: ? -----
>>> parallel.6: zip read info
>----- exec: "/sbin/rmmod ppa" -----
>----- return code: ? -----
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>>> block.2: sysfs drivers
>>> block.3: cdrom
>----- /proc/sys/dev/cdrom/info -----
>drive name:		hda
>drive speed:		48
>drive # of slots:	1
>Can close tray:		1
>Can open tray:		1
>Can lock tray:		1
>Can change speed:	1
>Can select disk:	0
>Can read multisession:	1
>Can read MCN:		1
>Reports media changed:	1
>Can play audio:		1
>Can write CD-R:		1
>Can write CD-RW:	1
>Can read DVD:		1
>Can write DVD-R:	0
>Can write DVD-RAM:	0
>Can read MRW:		1
>Can write MRW:		1
>Can write RAM:		1
>----- /proc/sys/dev/cdrom/info end -----
>>> block.4: partition
>----- /proc/partitions -----
>     7     0      65904 loop0
>----- /proc/partitions end -----
>disks:
>partitions:
>>> block.5: get sysfs block dev data
>  ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  block: name = fd0, path = /block/fd0
>    dev = 2:0
>    range = 1
>    block device: bus = platform, bus_id = floppy.0 driver = unknown
>      path = /devices/platform/floppy.0
>  block: name = hda, path = /block/hda
>    dev = 3:0
>    range = 1
>    block device: bus = ide, bus_id = 0.0 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  hda: el torito boot catalog at 0x51b8e
>    media type: 0
>    load address: 0x0000
>  block: name = loop0, path = /block/loop0
>    dev = 7:0
>    range = 1
>  block: name = loop1, path = /block/loop1
>    dev = 7:1
>    range = 1
>  block: name = loop2, path = /block/loop2
>    dev = 7:2
>    range = 1
>  block: name = loop3, path = /block/loop3
>    dev = 7:3
>    range = 1
>  block: name = loop4, path = /block/loop4
>    dev = 7:4
>    range = 1
>  block: name = loop5, path = /block/loop5
>    dev = 7:5
>    range = 1
>  block: name = loop6, path = /block/loop6
>    dev = 7:6
>    range = 1
>  block: name = loop7, path = /block/loop7
>    dev = 7:7
>    range = 1
>  block: name = md0, path = /block/md0
>    dev = 9:0
>    range = 1
>  block: name = ram0, path = /block/ram0
>    dev = 1:0
>    range = 1
>  block: name = ram10, path = /block/ram10
>    dev = 1:10
>    range = 1
>  block: name = ram11, path = /block/ram11
>    dev = 1:11
>    range = 1
>  block: name = ram12, path = /block/ram12
>    dev = 1:12
>    range = 1
>  block: name = ram13, path = /block/ram13
>    dev = 1:13
>    range = 1
>  block: name = ram14, path = /block/ram14
>    dev = 1:14
>    range = 1
>  block: name = ram15, path = /block/ram15
>    dev = 1:15
>    range = 1
>  block: name = ram1, path = /block/ram1
>    dev = 1:1
>    range = 1
>  block: name = ram2, path = /block/ram2
>    dev = 1:2
>    range = 1
>  block: name = ram3, path = /block/ram3
>    dev = 1:3
>    range = 1
>  block: name = ram4, path = /block/ram4
>    dev = 1:4
>    range = 1
>  block: name = ram5, path = /block/ram5
>    dev = 1:5
>    range = 1
>  block: name = ram6, path = /block/ram6
>    dev = 1:6
>    range = 1
>  block: name = ram7, path = /block/ram7
>    dev = 1:7
>    range = 1
>  block: name = ram8, path = /block/ram8
>    dev = 1:8
>    range = 1
>  block: name = ram9, path = /block/ram9
>    dev = 1:9
>    range = 1
>>> scsi.1: scsi modules
>>> scsi.2: scsi tape
>>> scsi.3: scsi generic
>>> usb.1: sysfs drivers
>>> usb.2: usb
>  usb dev: /devices/pci0000:00/0000:00:1d.7/usb1
>  usb dev: /devices/pci0000:00/0000:00:1d.0/usb2
>  usb dev: /devices/pci0000:00/0000:00:1d.1/usb3
>  usb dev: /devices/pci0000:00/0000:00:1d.2/usb4
>  usb dev: /devices/pci0000:00/0000:00:1d.3/usb5
>  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:1d.7/usb1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 1
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-8-default ehci_hcd"
>    product = "EHCI Host Controller"
>    serial = "0000:00:1d.7"
>    bcdDevice = 0206
>    speed = "480"
>  usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:1d.0/usb2
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-8-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.0"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 3-0:1.0, bus_id = 3-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 3-0:1.0 @ /devices/pci0000:00/0000:00:1d.1/usb3
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-8-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.1"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 4-0:1.0, bus_id = 4-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 4-0:1.0 @ /devices/pci0000:00/0000:00:1d.2/usb4
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-8-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.2"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 5-0:1.0, bus_id = 5-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 5-0:1.0 @ /devices/pci0000:00/0000:00:1d.3/usb5
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-8-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.3"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = usb1, bus_id = usb1, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.7/usb1
>  usb device: name = usb2, bus_id = usb2, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb2
>  usb device: name = usb3, bus_id = usb3, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.1/usb3
>  usb device: name = usb4, bus_id = usb4, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.2/usb4
>  usb device: name = usb5, bus_id = usb5, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.3/usb5
>>> usb.3.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>  FATAL: Module joydev not found.
>----- return code: ? -----
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> usb.3.3: input
>  input: name = event0, path = /class/input/event0
>    dev = 13:64
>  input: name = event1, path = /class/input/event1
>    dev = 13:65
>    input device: bus = serio, bus_id = serio1 driver = atkbd
>      path = /devices/platform/i8042/serio1
>  input: name = event2, path = /class/input/event2
>    dev = 13:66
>    input device: bus = serio, bus_id = serio0 driver = psmouse
>      path = /devices/platform/i8042/serio0
>  input: name = mice, path = /class/input/mice
>    dev = 13:63
>  input: name = mouse0, path = /class/input/mouse0
>    dev = 13:32
>    input device: bus = serio, bus_id = serio0 driver = psmouse
>      path = /devices/platform/i8042/serio0
>>> usb.3.4: lp
>>> usb.3.5: serial
>>> edd.1: edd mod
>>> edd.2: edd info
>edd: 0x80
>  size: 78125000
>  chs default: 77504/16/63
>  chs legacy: 1023/255/63
>  caps: fixed edd 
>  attached: #0 
>edd: 0x81
>  size: 488281250
>  chs default: 484406/16/63
>  chs legacy: 1023/255/63
>  caps: fixed edd 
>  attached: #0 
>edd: 0x82
>  size: 1392640
>  chs default: 680/64/32
>  chs legacy: 680/64/32
>  caps: fixed edd 
>  attached: #0 
>>> braille.1.1: alva
>>> braille.2.1: alva open
>>> braille.3.1: alva init ok
>>> braille.4.1: alva read data
>alva.100@/dev/ttyS0[0]: 
>>> braille.5.1: alva read done
>>> braille.1.1: fhp_old
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: fhp_el
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: ht
>>> braille.2.1: ht open
>>> braille.3.1: ht init ok
>>> braille.4.1: ht write ok
>>> braille.5.1: ht read done
>ht@/dev/ttyS0[1]: 00  "."
>no ht display: 0x00
>>> braille.1.1: baum
>>> braille.2.1: baum open
>>> braille.3.1: baum write ok
>>> braille.4.1: baum read done
>baum@/dev/ttyS0[0]: 
>>> modem.1: serial
>******  started child process 4301 (15s/120s)  ******
>>> modem.2: init
>>> modem.3.1: at test
>>> modem.3.2: at test
>>> modem.3.3: at test
>>> modem.3.4: at test
>>> modem.4: init string
>>> modem.5: speed
>>> modem.5: pnp id
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>----- serial modems end -----
>******  stopped child process 4301 (121s)  ******
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>----- serial modems end -----
>>> mouse.2: serial
>******  started child process 4302 (20s/20s)  ******
>----- serial mice -----
>/dev/ttyS0
>----- serial mice end -----
>******  stopped child process 4302 (19s)  ******
>----- serial mice -----
>/dev/ttyS0
>----- serial mice end -----
>>> input.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>  FATAL: Module joydev not found.
>----- return code: ? -----
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>  I: Bus=0010 Vendor=001f Product=0001 Version=0100
>  N: Name="PC Speaker"
>  P: Phys=isa0061/input0
>  H: Handlers=kbd event0 
>  B: EV=40001 
>  B: SND=6 
>  
>  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
>  N: Name="AT Translated Set 2 keyboard"
>  P: Phys=isa0060/serio0/input0
>  H: Handlers=kbd event1 
>  B: EV=120013 
>  B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe 
>  B: MSC=10 
>  B: LED=7 
>  
>  I: Bus=0011 Vendor=0002 Product=0006 Version=0000
>  N: Name="ImExPS/2 Generic Explorer Mouse"
>  P: Phys=isa0060/serio1/input0
>  H: Handlers=mouse0 event2 
>  B: EV=7 
>  B: KEY=1f0000 0 0 0 0 0 0 0 0 
>  B: REL=103 
>  
>----- /proc/bus/input/devices end -----
>bus = 16, name = PC Speaker
>  handlers = kbd event0
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = AT Translated Set 2 keyboard
>  handlers = kbd event1
>  key = 000000040200000003802078f840d001f2ffffdfffeffffffffffffffffffffe
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = ImExPS/2 Generic Explorer Mouse
>  handlers = mouse0 event2
>  key = 001f00000000000000000000000000000000000000000000000000000000000000000000
>  rel = 00000103
>  mouse buttons = 5
>  mouse wheels = 1
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 15
>  model		: 4
>  model name	: Intel(R) Pentium(R) 4 CPU 3.20GHz
>  stepping	: 1
>  cpu MHz		: 3200.980
>  cache size	: 1024 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 5
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm pni monitor ds_cpl cid cx16 xtpr
>  bogomips	: 6407.78
>  
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>/dev/console: major 4, minor 2
>>> fb.1: read info
>fb: size 800 x 600
>fb: timing 48.00 MHz, 46.88 kHz, 75.12 Hz
>>> net.1: get network data
>  net interface: name = eth0, classname = net, path = /class/net/eth0
>    type = 1
>    hw_addr = 00:11:43:fc:f7:9a
>    net device: path = /devices/pci0000:00/0000:00:1c.2/0000:05:00.0
>    ethtool driver: tg3
>    ethtool    bus: 0000:05:00.0
>  net interface: name = lo, classname = net, path = /class/net/lo
>    type = 772
>    hw_addr = 00:00:00:00:00:00
>  eth0: ethtool link state: 1
>  lo: ethtool link state: 1
>>> pppoe.1: looking for pppoe
>>> pppoe.2: discovery
>Attempt number 1
>eth0: Sending PADI packet
>Timeout waiting for PADO packets
>Attempt number 2
>eth0: Sending PADI packet
>Timeout waiting for PADO packets
>>> 38.1: detecting wlan features
>>> 38.2: assign udi
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4: floppy
>>> int.5: bios
>>> int.6: mouse
>>> int.15: system info
>  system type:
>  acpi: 1
>>> int.7: hdb
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>  P: /block/hda
>  N: hda
>  S: disk/by-path/pci-0000:00:1f.1-ide-0:0
>  E: ID_TYPE=cd
>  E: ID_MODEL=HL-DT-ST_RWDVD_GCC-4481B
>  E: ID_SERIAL=
>  E: ID_REVISION=E106
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-0:0
>  
>  P: /class/input/event0
>  N: input/event0
>  
>  P: /class/input/event1
>  N: input/event1
>  
>  P: /class/input/event2
>  N: input/event2
>  
>  P: /class/input/mice
>  N: input/mice
>  
>  P: /class/input/mouse0
>  N: input/mouse0
>  
>  P: /class/misc/device-mapper
>  N: device-mapper
>  S: mapper/control
>  
>  P: /class/usb_device/usbdev1.1
>  N: usbdev1.1
>  S: bus/usb/1/1
>  
>  P: /class/usb_device/usbdev2.1
>  N: usbdev2.1
>  S: bus/usb/2/1
>  
>  P: /class/usb_device/usbdev3.1
>  N: usbdev3.1
>  S: bus/usb/3/1
>  
>  P: /class/usb_device/usbdev4.1
>  N: usbdev4.1
>  S: bus/usb/4/1
>  
>  P: /class/usb_device/usbdev5.1
>  N: usbdev5.1
>  S: bus/usb/5/1
>  
>-----  udevinfo end -----
>/block/hda
>  name: hda
>  links: disk/by-path/pci-0000:00:1f.1-ide-0:0
>/class/input/event0
>  name: input/event0
>/class/input/event1
>  name: input/event1
>/class/input/event2
>  name: input/event2
>/class/input/mice
>  name: input/mice
>/class/input/mouse0
>  name: input/mouse0
>/class/misc/device-mapper
>  name: device-mapper
>  links: mapper/control
>/class/usb_device/usbdev1.1
>  name: usbdev1.1
>  links: bus/usb/1/1
>/class/usb_device/usbdev2.1
>  name: usbdev2.1
>  links: bus/usb/2/1
>/class/usb_device/usbdev3.1
>  name: usbdev3.1
>  links: bus/usb/3/1
>/class/usb_device/usbdev4.1
>  name: usbdev4.1
>  links: bus/usb/4/1
>/class/usb_device/usbdev5.1
>  name: usbdev5.1
>  links: bus/usb/5/1
>>> int.13: device names
>>> int.14: soft raid
>----- soft raid devices -----
>----- soft raid devices end -----
>>> int.15: geo
>>> int.16: parent
>  prop read: rdCR.3wRL2_g4d2B (failed)
>  old prop read: rdCR.3wRL2_g4d2B (failed)
>  prop read: /org/freedesktop/Hal/devices/computer_storage (failed)
>  prop read: sPPV.oZ89vuho4Y3 (failed)
>  old prop read: sPPV.oZ89vuho4Y3 (failed)
>  prop read: rdCR.lZF+r4EgHp4 (failed)
>  old prop read: rdCR.lZF+r4EgHp4 (failed)
>  prop read: rdCR.n_7QNeEnh23 (failed)
>  old prop read: rdCR.n_7QNeEnh23 (failed)
>  prop read: rdCR.EMpH5pjcahD (failed)
>  old prop read: rdCR.EMpH5pjcahD (failed)
>  prop read: rdCR.f5u1ucRm+H9 (failed)
>  old prop read: rdCR.f5u1ucRm+H9 (failed)
>  prop read: rdCR.8uRK7LxiIA2 (failed)
>  old prop read: rdCR.8uRK7LxiIA2 (failed)
>  prop read: rdCR.AJKleuxpiP0 (failed)
>  old prop read: rdCR.AJKleuxpiP0 (failed)
>  prop read: rdCR.hWmSPAStPX7 (failed)
>  old prop read: rdCR.hWmSPAStPX7 (failed)
>  prop read: rdCR.9N+EecqykME (failed)
>  old prop read: rdCR.9N+EecqykME (failed)
>  prop read: YMnp.ecK7NLYWZ5D (failed)
>  old prop read: YMnp.ecK7NLYWZ5D (failed)
>  prop read: rdCR.DziBbWO85o5 (failed)
>  old prop read: rdCR.DziBbWO85o5 (failed)
>  prop read: rdCR.CxwsZFjVASF (failed)
>  old prop read: rdCR.CxwsZFjVASF (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2588 (failed)
>  prop read: qLht.FggTLSy6ioC (failed)
>  old prop read: qLht.FggTLSy6ioC (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2589 (failed)
>  prop read: vSkL.i2qzuI4fDw5 (failed)
>  old prop read: vSkL.i2qzuI4fDw5 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_258a (failed)
>  prop read: _Znp.E2vDmmVnQ_8 (failed)
>  old prop read: _Znp.E2vDmmVnQ_8 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2660 (failed)
>  prop read: z8Q3.hdHR1LU2D6A (failed)
>  old prop read: z8Q3.hdHR1LU2D6A (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2662 (failed)
>  prop read: qTvu.jSAx_TjSGtA (failed)
>  old prop read: qTvu.jSAx_TjSGtA (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2664 (failed)
>  prop read: hoOk.lH3RycysJeB (failed)
>  old prop read: hoOk.lH3RycysJeB (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2666 (failed)
>  prop read: Z7uZ.n6ywvlBHNPC (failed)
>  old prop read: Z7uZ.n6ywvlBHNPC (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2658 (failed)
>  prop read: 1GTX.GuAJUzPEmqC (failed)
>  old prop read: 1GTX.GuAJUzPEmqC (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2659 (failed)
>  prop read: vayM.nI73zXXxHDD (failed)
>  old prop read: vayM.nI73zXXxHDD (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_265a (failed)
>  prop read: mvRC.Ij3pR6fepbD (failed)
>  old prop read: mvRC.Ij3pR6fepbD (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_265b (failed)
>  prop read: eEx1.p70ZwgmLL_D (failed)
>  old prop read: eEx1.p70ZwgmLL_D (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_265c (failed)
>  prop read: 5YuN.qYYUhJNpOC3 (failed)
>  old prop read: 5YuN.qYYUhJNpOC3 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_244e (failed)
>  prop read: 6NW+.OG+Sv+NxnRB (failed)
>  old prop read: 6NW+.OG+Sv+NxnRB (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2640 (failed)
>  prop read: BUZT.eklKNKr5Fv9 (failed)
>  old prop read: BUZT.eklKNKr5Fv9 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_266f (failed)
>  prop read: 3p2J.4avS4WMe9oB (failed)
>  old prop read: 3p2J.4avS4WMe9oB (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2652 (failed)
>  prop read: w7Y8.qzt_27n5wPB (failed)
>  old prop read: w7Y8.qzt_27n5wPB (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_266a (failed)
>  prop read: nS1_.am2DfnY1fz1 (failed)
>  old prop read: nS1_.am2DfnY1fz1 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_32c (failed)
>  prop read: VCu0.YXdx3wZz9v9 (failed)
>  old prop read: VCu0.YXdx3wZz9v9 (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_14e4_1659 (failed)
>  prop read: rBUF.4zsbPbsKSZ7 (failed)
>  old prop read: rBUF.4zsbPbsKSZ7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0200 (failed)
>  prop read: z9pp.ld94kxNGZf5 (failed)
>  old prop read: z9pp.ld94kxNGZf5 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c04 (failed)
>  prop read: QL3u.DE8RM9cWQQ8 (failed)
>  old prop read: QL3u.DE8RM9cWQQ8 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0800 (failed)
>  prop read: tWJy.bvKf3UMzZfE (failed)
>  old prop read: tWJy.bvKf3UMzZfE (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0b00 (failed)
>  prop read: KiZ0.WYwRElrJa93 (failed)
>  old prop read: KiZ0.WYwRElrJa93 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0700 (failed)
>  prop read: ntp4.yhTOLOXWEq7 (failed)
>  old prop read: ntp4.yhTOLOXWEq7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0303 (failed)
>  prop read: E349.xhndlW9HXJ7 (failed)
>  old prop read: E349.xhndlW9HXJ7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0f13 (failed)
>  prop read: hEKD.t7Yh1tpgb13 (failed)
>  old prop read: hEKD.t7Yh1tpgb13 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501 (failed)
>  prop read: NhVi.BuKI+1soRmD (failed)
>  old prop read: NhVi.BuKI+1soRmD (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0401 (failed)
>  prop read: qslm.YgT1Hy0M6x6 (failed)
>  old prop read: qslm.YgT1Hy0M6x6 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c01 (failed)
>  prop read: H20r.gNN83gfynbD (failed)
>  old prop read: H20r.gNN83gfynbD (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02 (failed)
>  prop read: iT2w.B+yZ9Ve8gC1 (failed)
>  old prop read: iT2w.B+yZ9Ve8gC1 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0103 (failed)
>  prop read: 9fI_.fG36JLVNse9 (failed)
>  old prop read: 9fI_.fG36JLVNse9 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0 (failed)
>  prop read: S_Uw.3fyvFV+mbWD (failed)
>  old prop read: S_Uw.3fyvFV+mbWD (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_model_HL_DT_ST_RW/DVD_GCC_4481B (failed)
>  prop read: Fffu.ZqJMm91z735 (failed)
>  old prop read: Fffu.ZqJMm91z735 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0 (failed)
>  prop read: k4bc.gLFDB5VQ9TE (failed)
>  old prop read: k4bc.gLFDB5VQ9TE (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0 (failed)
>  prop read: pBe4.pUFVGI8m888 (failed)
>  old prop read: pBe4.pUFVGI8m888 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0 (failed)
>  prop read: uIhY.aDK4e2xT5QF (failed)
>  old prop read: uIhY.aDK4e2xT5QF (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0 (failed)
>  prop read: zPk0.LyOf+ojB2i6 (failed)
>  old prop read: zPk0.LyOf+ojB2i6 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0 (failed)
>  prop read: 2XnU.6hTENZWv_zD (failed)
>  old prop read: 2XnU.6hTENZWv_zD (failed)
>  prop read: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input (failed)
>  prop read: EXC1.TBWTwSuMeW2 (failed)
>  old prop read: EXC1.TBWTwSuMeW2 (failed)
>  prop read: /org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input (failed)
>  prop read: AH6Q.j7w7y2X_WDD (failed)
>  old prop read: AH6Q.j7w7y2X_WDD (failed)
>  prop read: rdCR.j8NaKXDZtZ6 (failed)
>  old prop read: rdCR.j8NaKXDZtZ6 (failed)
>  prop read: rdCR.EY_qmtb9YY0 (failed)
>  old prop read: rdCR.EY_qmtb9YY0 (failed)
>  prop read: /org/freedesktop/Hal/devices/net_00_11_43_fc_f7_9a (failed)
>  prop read: usDW.ndpeucax6V1 (failed)
>  old prop read: usDW.ndpeucax6V1 (failed)
>  prop read: ZsBS.GQNx7L4uPNA (failed)
>  old prop read: ZsBS.GQNx7L4uPNA (failed)
>----- /proc/modules -----
>  parport_pc 38980 0 - Live 0xf8c2b000
>  parport 33864 1 parport_pc, Live 0xf8c42000
>  edd 9824 0 - Live 0xf8c71000
>  dm_snapshot 17180 0 - Live 0xf8c7f000
>  multipath 8064 0 - Live 0xf8c75000
>  raid6 100624 0 - Live 0xf8c8b000
>  raid5 22016 0 - Live 0xf8c4c000
>  xor 15240 2 raid6,raid5, Live 0xf8c6c000
>  raid1 17920 0 - Live 0xf8c66000
>  raid0 8448 0 - Live 0xf8c62000
>  dm_mod 54972 1 dm_snapshot, Live 0xf8c53000
>  st 38944 0 - Live 0xf8c37000
>  tg3 97412 0 - Live 0xf8e29000
>  ata_piix 9860 0 - Live 0xf8d9b000
>  ahci 12804 0 - Live 0xf8de8000
>  libata 49924 2 ata_piix,ahci, Live 0xf8dbe000
>  piix 9988 0 [permanent], Live 0xf8d38000
>  fan 4996 0 - Live 0xf887c000
>  thermal 14472 0 - Live 0xf8845000
>  processor 24252 1 thermal, Live 0xf8de1000
>  usb_storage 72512 0 - Live 0xf8dfa000
>  uhci_hcd 32016 0 - Live 0xf8dd8000
>  usbhid 43616 0 - Live 0xf8dcc000
>  ehci_hcd 32136 0 - Live 0xf8d53000
>  usbcore 112640 5 usb_storage,uhci_hcd,usbhid,ehci_hcd, Live 0xf8d7e000
>  ide_disk 17152 0 - Live 0xf8d32000
>  ide_cd 39684 0 - Live 0xf8d48000
>  ide_core 122380 4 piix,usb_storage,ide_disk,ide_cd, Live 0xf8d9f000
>  sg 35744 0 - Live 0xf8d3e000
>  sr_mod 16420 0 - Live 0xf8d20000
>  sd_mod 18576 0 - Live 0xf884f000
>  scsi_mod 131304 7 st,ahci,libata,usb_storage,sg,sr_mod,sd_mod, Live 0xf8d5c000
>  cdrom 36896 2 ide_cd,sr_mod, Live 0xf8d27000
>  cramfs 42356 1 - Live 0xf8863000
>  vfat 12800 0 - Live 0xf884a000
>  fat 49692 1 vfat, Live 0xf8855000
>  nls_iso8859_1 4096 0 - Live 0xf8839000
>  nls_cp437 5760 0 - Live 0xf8836000
>  af_packet 21384 2 - Live 0xf883e000
>  nvram 8328 0 - Live 0xf8820000
>----- /proc/modules end -----
>  used irqs: 0,1,2,3,4,5,6,8,9,10,11,12,14,17,25,33
>=========== end debug info ============
>01: None 00.0: 0102 Floppy disk controller
>  [Created at floppy.112]
>  Unique ID: rdCR.3wRL2_g4d2B
>  Hardware Class: storage
>  Model: "Floppy disk controller"
>  I/O Ports: 0x3f2-0x3f5 (rw)
>  DMA: 2
>  IRQ: 6 (79 events)
>  I/O Port: 0x3f7 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>02: Floppy 00.0: 10603 Floppy Disk
>  [Created at floppy.120]
>  UDI: /org/freedesktop/Hal/devices/computer_storage
>  Unique ID: sPPV.oZ89vuho4Y3
>  Parent ID: rdCR.3wRL2_g4d2B
>  Hardware Class: floppy
>  Model: "Floppy Disk"
>  Device File: /dev/fd0
>  Size: 3.5 ''
>  Size: 2880 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #1 (Floppy disk controller)
>
>03: None 00.0: 10105 BIOS
>  [Created at bios.154]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: on
>    Caps Lock: off
>  Serial Port 0: 0x3f8
>  Parallel Port 0: 0x378
>  Base Memory: 639 kB
>  PnP BIOS: @@@0000
>  BIOS: extended read supported
>  MP spec rev 1.4 info:
>    OEM id: "DELL"
>    Product id: "PE 0185"
>    1 CPUs (0 disabled)
>  BIOS32 Service Directory Entry: 0xffe90
>  SMBIOS Version: 2.3
>  Type 218 Record: #55808
>    Data 00: da 0b 00 da b2 00 17 0b 2e 68 00
>  BIOS Info: #0
>    Vendor: "Dell Computer Corporation"
>    Version: "A00"
>    Date: "10/04/2004"
>    Start Address: 0xf0000
>    ROM Size: 512 kB
>    Features: 0x0303001f00007deada90
>      ISA supported
>      PCI supported
>      PnP supported
>      BIOS flashable
>      BIOS shadowing allowed
>      ESCD supported
>      CD boot supported
>      BIOS ROM socketed
>      EDD spec supported
>      1.2MB Toshiba Japanese Floppy supported
>      360kB Floppy supported
>      1.2MB Floppy supported
>      720kB Floppy supported
>      Print Screen supported
>      8042 Keyboard Services supported
>      Serial Services supported
>      Printer Services supported
>      CGA/Mono Video supported
>      ACPI supported
>      USB Legacy supported
>      BIOS Boot Spec supported
>      F12 Network boot supported
>  System Info: #256
>    Manufacturer: "Dell Computer Corporation"
>    Product: "PowerEdge 800"
>    Serial: "F29PD1S"
>    UUID: undefined, but settable
>    Wake-up: 0x06 (Power Switch)
>  Board Info: #512
>    Manufacturer: "Dell Computer Corporation"
>    Product: "0G7255"
>    Version: "A00"
>    Serial: "..CN7170351A0354."
>  Chassis Info: #768
>    Manufacturer: "Dell Computer Corporation"
>    Serial: "F29PD1S"
>    Type: 0x11 (Main Server Chassis)
>    Lock: present
>    Bootup State: 0x03 (Safe)
>    Power Supply State: 0x03 (Safe)
>    Thermal State: 0x03 (Safe)
>    Security Status: 0x02 (Unknown)
>  Processor Info: #1024
>    Socket: "PROC"
>    Socket Type: 0x04 (ZIF Socket)
>    Socket Status: Populated
>    Type: 0x03 (CPU)
>    Family: 0xb2 (Pentium 4)
>    Manufacturer: "Intel"
>    Processor ID: 0xbfebfbff00000f41
>    Status: 0x01 (Enabled)
>    Voltage: 1.5 V
>    External Clock: 800 MHz
>    Max. Speed: 3800 MHz
>    Current Speed: 3200 MHz
>    L1 Cache: #1792
>    L2 Cache: #1793
>    L3 Cache: #1794
>  Cache Info: #1792
>    Level: L1
>    State: Enabled
>    Mode: 0x00 (Write Through)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x05 (Single-bit)
>    Type: 0x04 (Data)
>    Associativity: 0x07 (8-way Set-Associative)
>    Max. Size: 16 kB
>    Current Size: 16 kB
>    Supported SRAM Types: 0x0002 (Unknown)
>    Current SRAM Type: 0x0002 (Unknown)
>  Cache Info: #1793
>    Level: L2
>    State: Enabled
>    Mode: 0x02 (Varies with Memory Address)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x05 (Single-bit)
>    Type: 0x05 (Unified)
>    Associativity: 0x07 (8-way Set-Associative)
>    Max. Size: 1024 kB
>    Current Size: 1024 kB
>    Supported SRAM Types: 0x0002 (Unknown)
>    Current SRAM Type: 0x0002 (Unknown)
>  Cache Info: #1794
>    Level: L3
>    State: Enabled
>    Mode: 0x02 (Varies with Memory Address)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x05 (Unified)
>    Supported SRAM Types: 0x0002 (Unknown)
>    Current SRAM Type: 0x0002 (Unknown)
>  Port Connector: #2048
>    Type: 0x1c (Video Port)
>    External Connector: 0x07 (DB-15 pin female)
>  Inactive Record: #2049
>    Data 00: 7e 09 01 08 00 00 00 07 1c
>  Port Connector: #2050
>    Type: 0x10 (USB)
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #2051
>    Type: 0x10 (USB)
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #2052
>    Type: 0x10 (USB)
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #2053
>    Type: 0x10 (USB)
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #2054
>    Type: 0x02 (Parallel Port PS/2)
>    External Connector: 0x05 (DB-25 pin female)
>  Port Connector: #2055
>    Type: 0x1f (Network Port)
>    External Connector: 0x0b (RJ-45)
>  Inactive Record: #2056
>    Data 00: 7e 09 08 08 00 00 00 0b 1f
>  Port Connector: #2057
>    Type: 0x09 (Serial Port 16550A Compatible)
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #2058
>    Type: 0x0d (Keyboard Port)
>    External Connector: 0x0f (PS/2)
>  Port Connector: #2059
>    Type: 0x0e (Mouse Port)
>    External Connector: 0x0f (PS/2)
>  System Slot: #2304
>    Designation: "SLOT_1"
>    Type: 0xa5 (Other)
>    Bus Width: 0x08 (Other)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 1
>    Characteristics: 0x0104 (3.3 V, PME#)
>  System Slot: #2305
>    Designation: "SLOT_2"
>    Type: 0xa5 (Other)
>    Bus Width: 0x08 (Other)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 2
>    Characteristics: 0x0104 (3.3 V, PME#)
>  System Slot: #2306
>    Designation: "SLOT_3"
>    Type: 0x12 (PCI-X)
>    Bus Width: 0x06 (64 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 3
>    Characteristics: 0x0104 (3.3 V, PME#)
>  System Slot: #2307
>    Designation: "SLOT_4"
>    Type: 0x12 (PCI-X)
>    Bus Width: 0x06 (64 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 4
>    Characteristics: 0x0104 (3.3 V, PME#)
>  System Slot: #2308
>    Designation: "SLOT_5"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x03 (Short)
>    Slot ID: 5
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  On Board Devices: #2560
>    Video: "Intel CuRiver Embedded Video"
>    Ethernet: "Broadcom 5721 Ethernet"
>  OEM Strings: #2816
>    Dell System
>    5[0000]
>  Inactive Record: #32256
>    Data 00: 7e 90 00 7e 31 5b 20 20 20 20 5d 00 33 5b 20 20
>    Data 10: 20 5d 00 35 5b 30 30 30 30 5d 00 37 5b 20 20 20
>    Data 20: 20 5d 00 38 5b 20 20 20 20 20 20 20 20 20 20 20
>    Data 30: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
>    Data 40: 20 20 20 20 20 5d 00 39 5b 20 20 20 20 20 20 20
>    Data 50: 20 20 20 20 20 20 20 20 20 5d 00 31 30 5b 20 20
>    Data 60: 20 5d 00 31 31 5b 20 20 20 5d 00 31 32 5b 20 20
>    Data 70: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
>    Data 80: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 5d 00
>  System Config Options (Jumpers & Switches) #3072:
>    NVRAM_CLR:  Clear user settable NVRAM areas and set defaults
>    EN_PASSWD:  Close to enable password
>  Language Info: #3328
>    Languages: en|US|iso8859-1
>    Current: en|US|iso8859-1
>  Physical Memory Array: #4096
>    Use: 0x03 (System memory)
>    Location: 0x03 (Motherboard)
>    Slots: 4
>    Max. Size: 4 GB
>    ECC: 0x05 (Single-bit)
>  Memory Device: #4352
>    Location: "DIMM1_A"
>    Manufacturer: "CE00000000000000"
>    Serial: "4303D924"
>    Part Number: "M3 91T2953BG0-CD5"
>    Memory Array: #4096
>    Form Factor: 0x09 (DIMM)
>    Type: 0x12 (DDR)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits (+8 ECC bits)
>    Size: 1 GB
>    Speed: 533 MHz
>  Memory Device: #4353
>    Location: "DIMM2_A"
>    Manufacturer: "CE00000000000000"
>    Serial: "430FD8B9"
>    Part Number: "M3 91T2953BG0-CD5"
>    Memory Array: #4096
>    Form Factor: 0x09 (DIMM)
>    Type: 0x12 (DDR)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits (+8 ECC bits)
>    Size: 1 GB
>    Speed: 533 MHz
>  Memory Device: #4354
>    Location: "DIMM1_B"
>    Manufacturer: "CE00000000000000"
>    Serial: "4307D8B2"
>    Part Number: "M3 91T2953BG0-CD5"
>    Memory Array: #4096
>    Form Factor: 0x09 (DIMM)
>    Type: 0x12 (DDR)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits (+8 ECC bits)
>    Size: 1 GB
>    Speed: 533 MHz
>  Memory Device: #4355
>    Location: "DIMM2_B"
>    Manufacturer: "CE00000000000000"
>    Serial: "4310D8C7"
>    Part Number: "M3 91T2953BG0-CD5"
>    Memory Array: #4096
>    Form Factor: 0x09 (DIMM)
>    Type: 0x12 (DDR)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits (+8 ECC bits)
>    Size: 1 GB
>    Speed: 533 MHz
>  Memory Array Mapping: #4864
>    Memory Array: #4096
>    Partition Width: 4
>    Start Address: 0x00000000
>    End Address: 0xd0000000
>  Memory Device Mapping: #5120
>    Memory Device: #4352
>    Array Mapping: #4864
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0xd0000000
>  Memory Device Mapping: #5121
>    Memory Device: #4353
>    Array Mapping: #4864
>    Row: 2
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0xd0000000
>  Memory Device Mapping: #5122
>    Memory Device: #4354
>    Array Mapping: #4864
>    Row: 3
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0xd0000000
>  Memory Device Mapping: #5123
>    Memory Device: #4355
>    Array Mapping: #4864
>    Row: 4
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0xd0000000
>  Inactive Record: #5124
>    Data 00: 7e 13 04 14 00 00 00 00 00 00 00 00 00 00 00 13
>    Data 10: 01 00 00
>  Inactive Record: #5125
>    Data 00: 7e 13 05 14 00 00 00 00 00 00 00 00 00 00 00 13
>    Data 10: 02 00 00
>  Type 32 Record: #8192
>    Data 00: 20 0b 00 20 00 00 00 00 00 00 00
>  Type 38 Record: #9728
>    Data 00: 26 12 00 26 01 15 20 ff a9 0c 00 00 00 00 00 00
>    Data 10: 40 00
>  Type 208 Record: #53248
>    Data 00: d0 0a 00 d0 01 04 fe 00 85 01
>  Type 209 Record: #53504
>    Data 00: d1 0c 00 d1 78 03 07 03 04 0f 80 05
>  Type 210 Record: #53760
>    Data 00: d2 0c 00 d2 f8 03 04 03 06 80 04 05
>  Type 212 Record: #54272
>    Data 00: d4 9d 00 d4 70 00 71 00 00 10 2d 2e 03 00 11 7f
>    Data 10: 80 04 00 11 7f 00 07 00 25 9f 00 08 00 25 9f 20
>    Data 20: 09 00 25 9f 40 0a 00 25 9f 60 0b 00 25 7f 00 0c
>    Data 30: 00 25 7f 80 0f 00 25 f8 00 11 00 25 f8 01 12 00
>    Data 40: 25 f8 02 2e 40 25 f8 03 2f 40 25 f8 04 00 00 25
>    Data 50: f8 05 31 40 11 fb 00 32 40 11 fb 04 9d 00 11 fd
>    Data 60: 02 9e 00 11 fd 00 42 00 11 fe 01 43 00 11 fe 00
>    Data 70: 9f 00 26 fe 01 a0 00 26 fe 00 51 00 26 3f 00 52
>    Data 80: 00 26 3f 40 53 00 26 3f 80 54 00 26 3f c0 28 40
>    Data 90: 26 df 20 29 40 26 df 00 ff ff 00 00 00
>  Type 212 Record: #54273
>    Data 00: d4 e8 01 d4 70 00 71 00 03 40 59 6d 6b 00 78 7f
>    Data 10: 80 6c 00 78 7f 00 58 00 78 fa 05 59 00 78 fa 00
>    Data 20: 5c 00 78 bf 40 5d 00 78 bf 00 04 80 78 fd 02 01
>    Data 30: a0 78 fd 00 08 40 51 fe 01 09 40 51 fe 00 0a 40
>    Data 40: 51 fd 02 0b 40 51 fd 00 19 00 55 e7 00 1a 00 55
>    Data 50: e7 08 1b 00 55 e7 10 ff 00 55 9f 40 fe 00 55 9f
>    Data 60: 20 fd 00 55 9f 00 1e 00 55 fd 02 50 00 55 fd 00
>    Data 70: 8a 00 55 fe 01 8b 00 55 fe 00 bf 00 53 fe 00 c0
>    Data 80: 00 53 fe 01 33 40 53 e7 00 34 40 53 e7 08 35 40
>    Data 90: 53 e7 10 36 40 53 e7 18 1a 40 53 fd 02 1b 40 53
>    Data a0: fd 00 1c 40 53 fb 04 1d 40 53 fb 00 6e 00 58 fc
>    Data b0: 01 2d 00 58 fc 02 2e 00 58 fc 00 22 40 58 ef 10
>    Data c0: 23 40 58 ef 00 d8 00 55 7f 80 d9 00 55 7f 00 00
>    Data d0: c0 5c 00 0a 03 c0 67 00 05 83 00 76 00 00 84 00
>    Data e0: 77 00 00 ff ff 00 00 00
>  Type 212 Record: #54274
>    Data 00: d4 a2 02 d4 72 00 73 00 00 40 5d 5e 26 40 42 fe
>    Data 10: 01 27 40 42 fe 00 37 40 42 fb 00 38 40 42 fb 04
>    Data 20: 28 01 4a fc 00 29 01 4a fc 01 2a 01 4a fc 02 d1
>    Data 30: 00 7e fe 00 d2 00 7e fe 01 d3 00 00 00 02 00 90
>    Data 40: 2c 00 00 01 90 2d 00 00 17 01 4b fe 00 18 01 4b
>    Data 50: fe 01 19 01 4b fd 00 1a 01 4b fd 02 1b 01 4b fb
>    Data 60: 00 1c 01 4b fb 04 1d 01 4b f7 00 1e 01 4b f7 08
>    Data 70: 35 01 4c fc 00 37 01 4c fc 01 39 01 4c fc 02 3b
>    Data 80: 01 4c f3 04 3d 01 4c f3 08 de 00 76 fe 01 a1 00
>    Data 90: 48 fc 02 a3 00 48 fc 01 a2 00 48 fc 00 ff ff 00
>    Data a0: 00 00
>  Type 216 Record: #55296
>    Data 00: d8 09 00 d8 01 02 01 00 00
>    String 1: "Intel"
>    String 2: "CuRiver Build 3257"
>  Type 222 Record: #56832
>    Data 00: de 0d 00 de 01 02 ff ff 00 00 00 00 00
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>04: None 00.0: 10107 System
>  [Created at sys.56]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>05: None 00.0: 10104 FPU
>  [Created at misc.190]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.204]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0800 PIC (8259)
>  [Created at misc.217]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  IRQ: 2 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 0802 Timer (8254)
>  [Created at misc.228]
>  Unique ID: rdCR.AJKleuxpiP0
>  Hardware Class: unknown
>  Model: "Timer"
>  IRQ: 0 (203683 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>09: None 00.0: 0803 RTC (Generic)
>  [Created at misc.239]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (3 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>10: None 00.0: 0900 Keyboard controller
>  [Created at misc.249]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>11: None 00.0: 0701 Parallel controller (SPP)
>  [Created at misc.260]
>  Unique ID: YMnp.ecK7NLYWZ5D
>  Hardware Class: unknown
>  Model: "Parallel controller"
>  Device File: /dev/lp0
>  I/O Ports: 0x378-0x37a (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>12: None 00.0: 10400 PS/2 Controller
>  [Created at misc.302]
>  Unique ID: rdCR.DziBbWO85o5
>  Hardware Class: unknown
>  Model: "PS/2 Controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>14: None 00.0: 10102 Main Memory
>  [Created at memory.59]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0xcf75ffff (rw)
>  Memory Size: 3 GB + 256 MB
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>15: PCI 00.0: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2588
>  Unique ID: qLht.FggTLSy6ioC
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "Dell E7220/E7221 Memory Controller Hub"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2588 "E7220/E7221 Memory Controller Hub"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x0185 
>  Revision: 0x04
>  Module Alias: "pci:v00008086d00002588sv00001028sd00000185bc06sc00i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>16: PCI 01.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2589
>  Unique ID: vSkL.i2qzuI4fDw5
>  SysFS ID: /devices/pci0000:00/0000:00:01.0
>  SysFS BusID: 0000:00:01.0
>  Hardware Class: bridge
>  Model: "Intel E7220/E7221 PCI Express Root Port"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2589 "E7220/E7221 PCI Express Root Port"
>  Revision: 0x04
>  Driver: "pcieport-driver"
>  IRQ: 65 (no events)
>  Module Alias: "pci:v00008086d00002589sv00000000sd00000000bc06sc04i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>17: PCI 02.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_258a
>  Unique ID: _Znp.E2vDmmVnQ_8
>  SysFS ID: /devices/pci0000:00/0000:00:02.0
>  SysFS BusID: 0000:00:02.0
>  Hardware Class: graphics card
>  Model: "Dell E7221"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x258a "E7221"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x0185 
>  Revision: 0x04
>  Memory Range: 0xdff00000-0xdff7ffff (rw,non-prefetchable)
>  I/O Ports: 0x1000-0x1007 (rw)
>  Memory Range: 0xd0000000-0xd7ffffff (rw,prefetchable)
>  Memory Range: 0xdff80000-0xdffbffff (rw,non-prefetchable)
>  IRQ: 11 (no events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Module Alias: "pci:v00008086d0000258Asv00001028sd00000185bc03sc00i00"
>  Driver Info #0:
>    XFree86 v4 Server Module: i810
>  Driver Info #1:
>    XFree86 v4 Server Module: i810
>    3D Support: yes
>    Extensions: dri
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>18: PCI 1c.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2660
>  Unique ID: z8Q3.hdHR1LU2D6A
>  SysFS ID: /devices/pci0000:00/0000:00:1c.0
>  SysFS BusID: 0000:00:1c.0
>  Hardware Class: bridge
>  Model: "Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2660 "82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1"
>  Revision: 0x03
>  Driver: "pcieport-driver"
>  IRQ: 73 (no events)
>  Module Alias: "pci:v00008086d00002660sv00000000sd00000000bc06sc04i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>19: PCI 1c.1: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2662
>  Unique ID: qTvu.jSAx_TjSGtA
>  SysFS ID: /devices/pci0000:00/0000:00:1c.1
>  SysFS BusID: 0000:00:1c.1
>  Hardware Class: bridge
>  Model: "Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2662 "82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2"
>  Revision: 0x03
>  Driver: "pcieport-driver"
>  IRQ: 81 (no events)
>  Module Alias: "pci:v00008086d00002662sv00000000sd00000000bc06sc04i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>20: PCI 1c.2: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2664
>  Unique ID: hoOk.lH3RycysJeB
>  SysFS ID: /devices/pci0000:00/0000:00:1c.2
>  SysFS BusID: 0000:00:1c.2
>  Hardware Class: bridge
>  Model: "Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2664 "82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3"
>  Revision: 0x03
>  Driver: "pcieport-driver"
>  IRQ: 89 (no events)
>  Module Alias: "pci:v00008086d00002664sv00000000sd00000000bc06sc04i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>21: PCI 1c.3: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2666
>  Unique ID: Z7uZ.n6ywvlBHNPC
>  SysFS ID: /devices/pci0000:00/0000:00:1c.3
>  SysFS BusID: 0000:00:1c.3
>  Hardware Class: bridge
>  Model: "Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2666 "82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4"
>  Revision: 0x03
>  Driver: "pcieport-driver"
>  IRQ: 97 (no events)
>  Module Alias: "pci:v00008086d00002666sv00000000sd00000000bc06sc04i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>22: PCI 1d.0: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2658
>  Unique ID: 1GTX.GuAJUzPEmqC
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0
>  SysFS BusID: 0000:00:1d.0
>  Hardware Class: usb controller
>  Model: "Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2658 "82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x0185 
>  Revision: 0x03
>  Driver: "uhci_hcd"
>  I/O Ports: 0xdcc0-0xdcdf (rw)
>  IRQ: 10 (no events)
>  Module Alias: "pci:v00008086d00002658sv00001028sd00000185bc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>23: PCI 1d.1: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2659
>  Unique ID: vayM.nI73zXXxHDD
>  SysFS ID: /devices/pci0000:00/0000:00:1d.1
>  SysFS BusID: 0000:00:1d.1
>  Hardware Class: usb controller
>  Model: "Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2659 "82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x0185 
>  Revision: 0x03
>  Driver: "uhci_hcd"
>  I/O Ports: 0xdca0-0xdcbf (rw)
>  IRQ: 5 (70325 events)
>  Module Alias: "pci:v00008086d00002659sv00001028sd00000185bc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>24: PCI 1d.2: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_265a
>  Unique ID: mvRC.Ij3pR6fepbD
>  SysFS ID: /devices/pci0000:00/0000:00:1d.2
>  SysFS BusID: 0000:00:1d.2
>  Hardware Class: usb controller
>  Model: "Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x265a "82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x0185 
>  Revision: 0x03
>  Driver: "uhci_hcd"
>  I/O Ports: 0xdc80-0xdc9f (rw)
>  IRQ: 10 (no events)
>  Module Alias: "pci:v00008086d0000265Asv00001028sd00000185bc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>25: PCI 1d.3: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_265b
>  Unique ID: eEx1.p70ZwgmLL_D
>  SysFS ID: /devices/pci0000:00/0000:00:1d.3
>  SysFS BusID: 0000:00:1d.3
>  Hardware Class: usb controller
>  Model: "Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x265b "82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x0185 
>  Revision: 0x03
>  Driver: "uhci_hcd"
>  I/O Ports: 0xdc60-0xdc7f (rw)
>  IRQ: 5 (70325 events)
>  Module Alias: "pci:v00008086d0000265Bsv00001028sd00000185bc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>26: PCI 1d.7: 0c03 USB Controller (EHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_265c
>  Unique ID: 5YuN.qYYUhJNpOC3
>  SysFS ID: /devices/pci0000:00/0000:00:1d.7
>  SysFS BusID: 0000:00:1d.7
>  Hardware Class: usb controller
>  Model: "Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x265c "82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x0185 
>  Revision: 0x03
>  Driver: "ehci_hcd"
>  Memory Range: 0xdffc0400-0xdffc07ff (rw,non-prefetchable)
>  IRQ: 10 (no events)
>  Module Alias: "pci:v00008086d0000265Csv00001028sd00000185bc0Csc03i20"
>  Driver Info #0:
>    Driver Status: ehci-hcd is active
>    Driver Activation Cmd: "modprobe ehci-hcd"
>  Driver Info #1:
>    Driver Status: ehci_hcd is active
>    Driver Activation Cmd: "modprobe ehci_hcd"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>27: PCI 1e.0: 0604 PCI bridge (Subtractive decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_244e
>  Unique ID: 6NW+.OG+Sv+NxnRB
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0
>  SysFS BusID: 0000:00:1e.0
>  Hardware Class: bridge
>  Model: "Intel 82801 PCI Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x244e "82801 PCI Bridge"
>  Revision: 0xd3
>  Module Alias: "pci:v00008086d0000244Esv00000000sd00000000bc06sc04i01"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>28: PCI 1f.0: 0601 ISA bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2640
>  Unique ID: BUZT.eklKNKr5Fv9
>  SysFS ID: /devices/pci0000:00/0000:00:1f.0
>  SysFS BusID: 0000:00:1f.0
>  Hardware Class: bridge
>  Model: "Intel 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2640 "82801FB/FR (ICH6/ICH6R) LPC Interface Bridge"
>  Revision: 0x03
>  Module Alias: "pci:v00008086d00002640sv00000000sd00000000bc06sc01i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>29: PCI 1f.1: 0101 IDE interface
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_266f
>  Unique ID: 3p2J.4avS4WMe9oB
>  SysFS ID: /devices/pci0000:00/0000:00:1f.1
>  SysFS BusID: 0000:00:1f.1
>  Hardware Class: storage
>  Model: "Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x266f "82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x0185 
>  Revision: 0x03
>  Driver: "PIIX_IDE"
>  I/O Ports: 0xfc00-0xfc0f (rw)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  IRQ: 14 (1588 events)
>  Module Alias: "pci:v00008086d0000266Fsv00001028sd00000185bc01sc01i8a"
>  Driver Info #0:
>    Driver Status: piix is active
>    Driver Activation Cmd: "modprobe piix"
>  Driver Info #1:
>    Driver Status: generic is not active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>30: PCI 1f.2: 0101 IDE interface
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2652
>  Unique ID: w7Y8.qzt_27n5wPB
>  SysFS ID: /devices/pci0000:00/0000:00:1f.2
>  SysFS BusID: 0000:00:1f.2
>  Hardware Class: storage
>  Model: "Intel 82801FR/FRW (ICH6R/ICH6RW) SATA Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2652 "82801FR/FRW (ICH6R/ICH6RW) SATA Controller"
>  SubVendor: pci 0x8086 "Intel Corporation"
>  SubDevice: pci 0x2652 
>  Revision: 0x03
>  Driver: "ahci"
>  I/O Ports: 0xdcf0-0xdcf7 (rw)
>  I/O Ports: 0xdce8-0xdceb (rw)
>  I/O Ports: 0xdc58-0xdc5f (rw)
>  I/O Ports: 0xdce0-0xdce3 (rw)
>  I/O Ports: 0xdc40-0xdc4f (rw)
>  Memory Range: 0xdffc0000-0xdffc03ff (rw,non-prefetchable)
>  IRQ: 3 (100000 events)
>  Module Alias: "pci:v00008086d00002652sv00008086sd00002652bc01sc01i8f"
>  Driver Info #0:
>    Driver Status: ata_piix is active
>    Driver Activation Cmd: "modprobe ata_piix"
>  Driver Info #1:
>    Driver Status: ahci is active
>    Driver Activation Cmd: "modprobe ahci"
>  Driver Info #2:
>    Driver Status: generic is not active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>31: PCI 1f.3: 0c05 SMBus
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_266a
>  Unique ID: nS1_.am2DfnY1fz1
>  SysFS ID: /devices/pci0000:00/0000:00:1f.3
>  SysFS BusID: 0000:00:1f.3
>  Hardware Class: unknown
>  Model: "Dell 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x266a "82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x0185 
>  Revision: 0x03
>  I/O Ports: 0x8c0-0x8df (rw)
>  Module Alias: "pci:v00008086d0000266Asv00001028sd00000185bc0Csc05i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>32: PCI 100.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_32c
>  Unique ID: VCu0.YXdx3wZz9v9
>  Parent ID: vSkL.i2qzuI4fDw5
>  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>  SysFS BusID: 0000:01:00.0
>  Hardware Class: bridge
>  Model: "Intel 6702PXH PCI Express-to-PCI Bridge A"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x032c "6702PXH PCI Express-to-PCI Bridge A"
>  Revision: 0x09
>  Module Alias: "pci:v00008086d0000032Csv00000000sd00000000bc06sc04i00"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #16 (PCI bridge)
>
>33: PCI 500.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_14e4_1659
>  Unique ID: rBUF.4zsbPbsKSZ7
>  Parent ID: hoOk.lH3RycysJeB
>  SysFS ID: /devices/pci0000:00/0000:00:1c.2/0000:05:00.0
>  SysFS BusID: 0000:05:00.0
>  Hardware Class: network
>  Model: "Dell NetXtreme BCM5721 Gigabit Ethernet PCI Express"
>  Vendor: pci 0x14e4 "Broadcom"
>  Device: pci 0x1659 "NetXtreme BCM5721 Gigabit Ethernet PCI Express"
>  SubVendor: pci 0x1028 "Dell"
>  SubDevice: pci 0x0185 
>  Revision: 0x01
>  Driver: "tg3"
>  Device File: eth0
>  Memory Range: 0xdfcf0000-0xdfcfffff (rw,non-prefetchable)
>  IRQ: 5 (70325 events)
>  HW Address: 00:11:43:fc:f7:9a
>  Link detected: yes
>  Module Alias: "pci:v000014E4d00001659sv00001028sd00000185bc02sc00i00"
>  Driver Info #0:
>    Driver Status: tg3 is active
>    Driver Activation Cmd: "modprobe tg3"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #20 (PCI bridge)
>
>34: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
>  Unique ID: z9pp.ld94kxNGZf5
>  SysFS ID: /devices/pnp0/00:00
>  SysFS BusID: 00:00
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0200 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>35: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
>  Unique ID: QL3u.DE8RM9cWQQ8
>  SysFS ID: /devices/pnp0/00:01
>  SysFS BusID: 00:01
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c04 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>36: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0800
>  Unique ID: tWJy.bvKf3UMzZfE
>  SysFS ID: /devices/pnp0/00:02
>  SysFS BusID: 00:02
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0800 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>37: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
>  Unique ID: KiZ0.WYwRElrJa93
>  SysFS ID: /devices/pnp0/00:03
>  SysFS BusID: 00:03
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0b00 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>38: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0700
>  Unique ID: ntp4.yhTOLOXWEq7
>  SysFS ID: /devices/pnp0/00:04
>  SysFS BusID: 00:04
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0700 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>39: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0303
>  Unique ID: E349.xhndlW9HXJ7
>  SysFS ID: /devices/pnp0/00:05
>  SysFS BusID: 00:05
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0303 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>40: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0f13
>  Unique ID: hEKD.t7Yh1tpgb13
>  SysFS ID: /devices/pnp0/00:06
>  SysFS BusID: 00:06
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0f13 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>41: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501
>  Unique ID: NhVi.BuKI+1soRmD
>  SysFS ID: /devices/pnp0/00:07
>  SysFS BusID: 00:07
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0501 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>42: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0401
>  Unique ID: qslm.YgT1Hy0M6x6
>  SysFS ID: /devices/pnp0/00:08
>  SysFS BusID: 00:08
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0401 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>43: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01
>  Unique ID: H20r.gNN83gfynbD
>  SysFS ID: /devices/pnp0/00:09
>  SysFS BusID: 00:09
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c01 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>44: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02
>  Unique ID: iT2w.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:0a
>  SysFS BusID: 00:0a
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>45: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0103
>  Unique ID: 9fI_.fG36JLVNse9
>  SysFS ID: /devices/pnp0/00:0b
>  SysFS BusID: 00:0b
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0103 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>46: None 00.0: 0700 Serial controller (16550)
>  [Created at serial.73]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0
>  Unique ID: S_Uw.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS0
>  I/O Ports: 0x3f8-0x3ff (rw)
>  IRQ: 4 (60 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>47: IDE 00.0: 10602 CD-ROM (CD-RW)
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_model_HL_DT_ST_RW/DVD_GCC_4481B
>  Unique ID: Fffu.ZqJMm91z735
>  Parent ID: 3p2J.4avS4WMe9oB
>  SysFS ID: /block/hda
>  SysFS BusID: 0.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  Hardware Class: cdrom
>  Model: "HL-DT-ST RW/DVD GCC-4481B"
>  Vendor: "HL-DT-ST"
>  Device: "RW/DVD GCC-4481B"
>  Revision: "E106"
>  Serial ID: ""
>  Driver: "PIIX_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0
>  Device Files: /dev/hda, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0
>  Device Number: block 3:0
>  Features: CD-R, CD-RW, DVD
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #29 (IDE interface)
>  Drive Speed: 48
>  Volume ID: "SU810.001"
>  Application: "MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING"
>  Publisher: "openSUSE, opensuse@opensuse.org"
>  Preparer: "SUPER"
>  Creation date: "2005091211375100("
>  El Torito info: platform 0, bootable
>    Boot Catalog: at sector 0x51b8e
>    Id String: "openSUSE, opensuse@open"
>    Media: none starting at sector 0x52b2b
>    Load: 2048 bytes
>
>48: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0
>  Unique ID: k4bc.gLFDB5VQ9TE
>  Parent ID: 5YuN.qYYUhJNpOC3
>  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-8-default ehci_hcd EHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-8-default ehci_hcd"
>  Device: "EHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.7"
>  Driver: "hub"
>  Speed: 480 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #26 (USB Controller)
>
>49: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0
>  Unique ID: pBe4.pUFVGI8m888
>  Parent ID: 1GTX.GuAJUzPEmqC
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-0:1.0
>  SysFS BusID: 2-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-8-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-8-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.0"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #22 (USB Controller)
>
>50: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0
>  Unique ID: uIhY.aDK4e2xT5QF
>  Parent ID: vayM.nI73zXXxHDD
>  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb3/3-0:1.0
>  SysFS BusID: 3-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-8-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-8-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.1"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #23 (USB Controller)
>
>51: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0
>  Unique ID: zPk0.LyOf+ojB2i6
>  Parent ID: mvRC.Ij3pR6fepbD
>  SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb4/4-0:1.0
>  SysFS BusID: 4-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-8-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-8-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.2"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #24 (USB Controller)
>
>52: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0
>  Unique ID: 2XnU.6hTENZWv_zD
>  Parent ID: eEx1.p70ZwgmLL_D
>  SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb5/5-0:1.0
>  SysFS BusID: 5-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-8-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-8-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.3"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #25 (USB Controller)
>
>53: PS/2 00.0: 10800 Keyboard
>  [Created at input.137]
>  UDI: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input
>  Unique ID: EXC1.TBWTwSuMeW2
>  Hardware Class: keyboard
>  Model: "AT Translated Set 2 keyboard"
>  Vendor: int 0x0211 
>  Device: int 0x0001 "AT Translated Set 2 keyboard"
>  Device File: /dev/input/event1
>  Device Number: char 13:65
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>54: PS/2 00.0: 10500 PS/2 Mouse
>  [Created at input.157]
>  UDI: /org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input
>  Unique ID: AH6Q.j7w7y2X_WDD
>  Hardware Class: mouse
>  Model: "ImExPS/2 Generic Explorer Mouse"
>  Vendor: int 0x0210 
>  Device: int 0x0015 "ImExPS/2 Generic Explorer Mouse"
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2
>  Device Number: char 13:63 (char 13:32)
>  Driver Info #0:
>    Buttons: 5
>    Wheels: 1
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>55: None 00.0: 10103 CPU
>  [Created at cpu.290]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: Intel
>  Vendor: "GenuineIntel"
>  Model: 15.4.1 "Intel(R) Pentium(R) 4 CPU 3.20GHz"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,nx,lm,pni,monitor,ds_cpl,cid,cx16,xtpr
>  Clock: 3200 MHz
>  Cache: 1024 kb
>  Units/Processor: 2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>56: None 00.0: 10000 Monitor
>  [Created at fb.70]
>  Unique ID: rdCR.EY_qmtb9YY0
>  Hardware Class: monitor
>  Model: "Generic Monitor"
>  Vendor: "Generic"
>  Device: "Monitor"
>  Resolution: 800x600@75Hz
>  Driver Info #0:
>    Max. Resolution: 800x600
>    Vert. Sync Range: 50-90 Hz
>    Hor. Sync Range: 31-48 kHz
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>57: None 00.0: 10701 Ethernet
>  [Created at net.111]
>  UDI: /org/freedesktop/Hal/devices/net_00_11_43_fc_f7_9a
>  Unique ID: usDW.ndpeucax6V1
>  Parent ID: rBUF.4zsbPbsKSZ7
>  SysFS ID: /class/net/eth0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1c.2/0000:05:00.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "tg3"
>  Device File: eth0
>  HW Address: 00:11:43:fc:f7:9a
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #33 (Ethernet controller)
>
>58: None 00.0: 10700 Loopback
>  [Created at net.111]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 116364: 49557 | 49558 | 49570 | 49572 | 49590 | 49591 | 49608 | 49609 | 50889 | 83861 | 83905 | 83907 | 83925