Bugzilla – Attachment 49564 Details for
Bug 114387
kernel panic on AMD64: printing on USB printer
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
hwinfo of g228.suse.de
hwinfo.g228.suse.de (text/plain), 173.73 KB, created by
Klaus Singvogel
on 2005-09-12 07:35:00 UTC
(
hide
)
Description:
hwinfo of g228.suse.de
Filename:
MIME Type:
Creator:
Klaus Singvogel
Created:
2005-09-12 07:35:00 UTC
Size:
173.73 KB
patch
obsolete
>============ start debug info ============ >libhd version 11.16u (x86-64) >kernel version is 2.6 >----- /proc/cmdline ----- > root=/dev/sda2 vga=0x31a selinux=0 resume=/dev/sda1 splash=silent console=ttyS0,115200 >----- /proc/cmdline end ----- >debug = 0xff7ffff7 >probe = 0x00138fc4aa17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc) >shm: attached segment 98304 at 0x2aaaaab05000 >>> hal.1: read hal data > hal: connected to: :1.661 >----- hal device list ----- > 0: udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_HU22Y0410250635140_if0_printer_noserial' > info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_HU22Y0410250635140_if0_printer_noserial' > printer.description = 'EPSON Stylus C66' > printer.product = 'Stylus C66' > printer.vendor = 'EPSON' > info.vendor = 'EPSON' > linux.device_file = '/dev/usb/lp1' > linux.subsystem = 'usb' > linux.hotplug_type = 2 (0x2) > printer.physical_device = '/org/freedesktop/Hal/devices/usb_device_4b8_5_HU22Y0410250635140_if0' > printer.device = '/dev/usb/lp1' > info.product = 'Stylus C66' > info.capabilities = { 'printer' } > info.category = 'printer' > info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_5_HU22Y0410250635140_if0' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4/2-1.4:1.0' > linux.sysfs_path = '/sys/class/usb/lp1' > > 1: udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_HU22Y0410250635140_if0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_HU22Y0410250635140_if0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > info.product = 'USB Printer Interface' > usb.interface.protocol = 2 (0x2) > usb.interface.subclass = 1 (0x1) > usb.interface.class = 7 (0x7) > usb.interface.number = 0 (0x0) > info.linux.driver = 'usblp' > usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4/2-1.4:1.0' > usb.configuration_value = 1 (0x1) > usb.num_configurations = 1 (0x1) > usb.num_interfaces = 1 (0x1) > usb.device_class = 0 (0x0) > usb.device_subclass = 0 (0x0) > usb.device_protocol = 0 (0x0) > usb.vendor_id = 1208 (0x4b8) > usb.product_id = 5 (0x5) > usb.vendor = 'Seiko Epson Corp.' > usb.product = 'USB Printer Interface' > usb.device_revision_bcd = 256 (0x100) > usb.max_power = 2 (0x2) > usb.num_ports = 0 (0x0) > usb.linux.device_number = 12 (0xc) > usb.serial = 'HU22Y0410250635140' > usb.speed_bcd = 4608 (0x1200) > usb.version_bcd = 272 (0x110) > usb.is_self_powered = true > usb.can_wake_up = false > usb.bus_number = 2 (0x2) > info.bus = 'usb' > info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_5_HU22Y0410250635140' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4/2-1.4:1.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4/2-1.4:1.0' > > 2: udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0_printer_noserial' > info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0_printer_noserial' > printer.description = 'EPSON Stylus COLOR 580' > printer.product = 'Stylus COLOR 580' > printer.vendor = 'EPSON' > info.vendor = 'EPSON' > linux.device_file = '/dev/usb/lp0' > linux.subsystem = 'usb' > linux.hotplug_type = 2 (0x2) > printer.physical_device = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0' > printer.device = '/dev/usb/lp0' > info.product = 'Stylus COLOR 580' > info.capabilities = { 'printer' } > info.category = 'printer' > info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3/2-1.3:1.0' > linux.sysfs_path = '/sys/class/usb/lp0' > > 3: udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > info.product = 'USB Printer Interface' > usb.interface.protocol = 2 (0x2) > usb.interface.subclass = 1 (0x1) > usb.interface.class = 7 (0x7) > usb.interface.number = 0 (0x0) > info.linux.driver = 'usblp' > usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3/2-1.3:1.0' > usb.configuration_value = 1 (0x1) > usb.num_configurations = 1 (0x1) > usb.num_interfaces = 1 (0x1) > usb.device_class = 0 (0x0) > usb.device_subclass = 0 (0x0) > usb.device_protocol = 0 (0x0) > usb.vendor_id = 1208 (0x4b8) > usb.product_id = 5 (0x5) > usb.vendor = 'Seiko Epson Corp.' > usb.product = 'USB Printer Interface' > usb.device_revision_bcd = 256 (0x100) > usb.max_power = 2 (0x2) > usb.num_ports = 0 (0x0) > usb.linux.device_number = 11 (0xb) > usb.serial = 'L84NO0009270827130' > usb.speed_bcd = 4608 (0x1200) > usb.version_bcd = 272 (0x110) > usb.is_self_powered = true > usb.can_wake_up = false > usb.bus_number = 2 (0x2) > info.bus = 'usb' > info.parent = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3/2-1.3:1.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3/2-1.3:1.0' > > 4: udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_HU22Y0410250635140' > info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_HU22Y0410250635140' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > usb_device.bus_number = 2 (0x2) > usb_device.can_wake_up = false > usb_device.is_self_powered = true > usb_device.version_bcd = 272 (0x110) > usb_device.speed_bcd = 4608 (0x1200) > usb_device.serial = 'HU22Y0410250635140' > usb_device.linux.device_number = 12 (0xc) > usb_device.num_ports = 0 (0x0) > usb_device.max_power = 2 (0x2) > usb_device.device_revision_bcd = 256 (0x100) > info.product = 'Stylus Printer' > usb_device.product = 'Stylus Printer' > info.vendor = 'Seiko Epson Corp.' > usb_device.vendor = 'Seiko Epson Corp.' > usb_device.product_id = 5 (0x5) > usb_device.vendor_id = 1208 (0x4b8) > usb_device.device_protocol = 0 (0x0) > usb_device.device_subclass = 0 (0x0) > usb_device.device_class = 0 (0x0) > usb_device.num_interfaces = 1 (0x1) > usb_device.num_configurations = 1 (0x1) > usb_device.configuration_value = 1 (0x1) > usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4' > info.linux.driver = 'usb' > info.bus = 'usb_device' > info.parent = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4' > > 5: udi = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial_if0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial_if0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > info.product = 'USB Hub Interface' > usb.interface.protocol = 0 (0x0) > usb.interface.subclass = 0 (0x0) > usb.interface.class = 9 (0x9) > usb.interface.number = 0 (0x0) > info.linux.driver = 'hub' > usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0' > usb.configuration_value = 1 (0x1) > usb.num_configurations = 1 (0x1) > usb.num_interfaces = 1 (0x1) > usb.device_class = 9 (0x9) > usb.device_subclass = 0 (0x0) > usb.device_protocol = 0 (0x0) > usb.vendor_id = 1105 (0x451) > usb.product_id = 5190 (0x1446) > usb.vendor = 'Texas Instruments, Inc.' > usb.product = 'USB Hub Interface' > usb.device_revision_bcd = 272 (0x110) > usb.max_power = 100 (0x64) > usb.num_ports = 4 (0x4) > usb.linux.device_number = 10 (0xa) > usb.speed_bcd = 4608 (0x1200) > usb.version_bcd = 272 (0x110) > usb.is_self_powered = true > usb.can_wake_up = true > usb.bus_number = 2 (0x2) > info.bus = 'usb' > info.parent = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0' > > 6: udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130' > info.udi = '/org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > usb_device.bus_number = 2 (0x2) > usb_device.can_wake_up = false > usb_device.is_self_powered = true > usb_device.version_bcd = 272 (0x110) > usb_device.speed_bcd = 4608 (0x1200) > usb_device.serial = 'L84NO0009270827130' > usb_device.linux.device_number = 11 (0xb) > usb_device.num_ports = 0 (0x0) > usb_device.max_power = 2 (0x2) > usb_device.device_revision_bcd = 256 (0x100) > info.product = 'Stylus Printer' > usb_device.product = 'Stylus Printer' > info.vendor = 'Seiko Epson Corp.' > usb_device.vendor = 'Seiko Epson Corp.' > usb_device.product_id = 5 (0x5) > usb_device.vendor_id = 1208 (0x4b8) > usb_device.device_protocol = 0 (0x0) > usb_device.device_subclass = 0 (0x0) > usb_device.device_class = 0 (0x0) > usb_device.num_interfaces = 1 (0x1) > usb_device.num_configurations = 1 (0x1) > usb_device.configuration_value = 1 (0x1) > usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3' > info.linux.driver = 'usb' > info.bus = 'usb_device' > info.parent = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3' > > 7: udi = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial' > info.udi = '/org/freedesktop/Hal/devices/usb_device_451_1446_noserial' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > usb_device.bus_number = 2 (0x2) > usb_device.can_wake_up = true > usb_device.is_self_powered = true > usb_device.version_bcd = 272 (0x110) > usb_device.speed_bcd = 4608 (0x1200) > usb_device.linux.device_number = 10 (0xa) > usb_device.num_ports = 4 (0x4) > usb_device.max_power = 100 (0x64) > usb_device.device_revision_bcd = 272 (0x110) > info.product = 'TUSB2040/2070 Hub' > usb_device.product = 'TUSB2040/2070 Hub' > info.vendor = 'Texas Instruments, Inc.' > usb_device.vendor = 'Texas Instruments, Inc.' > usb_device.product_id = 5190 (0x1446) > usb_device.vendor_id = 1105 (0x451) > usb_device.device_protocol = 0 (0x0) > usb_device.device_subclass = 0 (0x0) > usb_device.device_class = 9 (0x9) > usb_device.num_interfaces = 1 (0x1) > usb_device.num_configurations = 1 (0x1) > usb_device.configuration_value = 1 (0x1) > usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1' > info.linux.driver = 'usb' > info.bus = 'usb_device' > info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-1' > > 8: udi = '/org/freedesktop/Hal/devices/acpi_PWRF' > info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF' > linux.hotplug_type = 4 (0x4) > button.has_state = false > info.capabilities = { 'button' } > info.category = 'button' > info.product = 'Power Button' > button.type = 'power' > info.parent = '/org/freedesktop/Hal/devices/computer' > linux.acpi_type = 4 (0x4) > linux.acpi_path = '/proc/acpi/button/power/PWRF' > > 9: udi = '/org/freedesktop/Hal/devices/acpi_PWRB' > info.udi = '/org/freedesktop/Hal/devices/acpi_PWRB' > linux.hotplug_type = 4 (0x4) > button.has_state = false > info.capabilities = { 'button' } > info.category = 'button' > info.product = 'Power Button' > button.type = 'power' > info.parent = '/org/freedesktop/Hal/devices/computer' > linux.acpi_type = 4 (0x4) > linux.acpi_path = '/proc/acpi/button/power/PWRB' > > 10: udi = '/org/freedesktop/Hal/devices/acpi_CPU1' > info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' > linux.hotplug_type = 4 (0x4) > processor.can_throttle = false > processor.number = 0 (0x0) > info.capabilities = { 'processor' } > info.category = 'processor' > info.product = 'Processor' > info.parent = '/org/freedesktop/Hal/devices/computer' > linux.acpi_type = 1 (0x1) > linux.acpi_path = '/proc/acpi/processor/CPU1' > > 11: udi = '/org/freedesktop/Hal/devices/volume_part1_size_1077479424' > info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_1077479424' > volume.partition.msdos_part_table_type = 130 (0x82) > info.product = 'Volume (swap)' > volume.size = 1077479424ull (0x40390800ull) > volume.num_blocks = 2104452 (0x201c84) > volume.block_size = 512 (0x200) > volume.partition.number = 1 (0x1) > info.capabilities = { 'volume', 'block' } > info.category = 'volume' > volume.is_partition = true > volume.is_disc = false > volume.is_mounted = false > volume.mount_point = '' > volume.label = '' > volume.uuid = '' > volume.fsversion = '2' > volume.fsusage = 'other' > volume.fstype = 'swap' > block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD' > block.is_volume = true > block.minor = 1 (0x1) > block.major = 8 (0x8) > block.device = '/dev/sda1' > linux.hotplug_type = 3 (0x3) > info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD' > linux.sysfs_path_device = '/sys/block/sda/sda1' > linux.sysfs_path = '/sys/block/sda/sda1' > > 12: udi = '/org/freedesktop/Hal/devices/volume_uuid_70176bdf_56db_4a78_8ece_5b88b8a48a5d' > volume.policy.desired_mount_point = 'scsidisk' > volume.policy.mount_filesystem = 'ext3' > volume.policy.should_mount = true > info.udi = '/org/freedesktop/Hal/devices/volume_uuid_70176bdf_56db_4a78_8ece_5b88b8a48a5d' > volume.partition.msdos_part_table_type = 131 (0x83) > info.product = 'Volume (ext3)' > volume.size = 5371107840ull (0x140249a00ull) > volume.num_blocks = 10490445 (0xa0124d) > volume.block_size = 512 (0x200) > volume.partition.number = 2 (0x2) > info.capabilities = { 'volume', 'block' } > info.category = 'volume' > volume.is_partition = true > volume.is_disc = false > volume.is_mounted = true > volume.mount_point = '/' > volume.label = '' > volume.uuid = '70176bdf-56db-4a78-8ece-5b88b8a48a5d' > volume.fsversion = '' > volume.fsusage = 'filesystem' > volume.fstype = 'ext3' > block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD' > block.is_volume = true > block.minor = 2 (0x2) > block.major = 8 (0x8) > block.device = '/dev/sda2' > linux.hotplug_type = 3 (0x3) > info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD' > linux.sysfs_path_device = '/sys/block/sda/sda2' > linux.sysfs_path = '/sys/block/sda/sda2' > > 13: udi = '/org/freedesktop/Hal/devices/volume_uuid_4e557ca8_6263_4b1f_96fb_73bb416727c0' > volume.policy.desired_mount_point = 'scsidisk' > volume.policy.mount_filesystem = 'ext3' > volume.policy.should_mount = true > info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4e557ca8_6263_4b1f_96fb_73bb416727c0' > volume.partition.msdos_part_table_type = 131 (0x83) > info.product = 'Volume (ext3)' > volume.size = 75886433280ull (0x11ab2f1400ull) > volume.num_blocks = 148215690 (0x8d5978a) > volume.block_size = 512 (0x200) > volume.partition.number = 3 (0x3) > info.capabilities = { 'volume', 'block' } > info.category = 'volume' > volume.is_partition = true > volume.is_disc = false > volume.is_mounted = true > volume.mount_point = '/space' > volume.label = '' > volume.uuid = '4e557ca8-6263-4b1f-96fb-73bb416727c0' > volume.fsversion = '' > volume.fsusage = 'filesystem' > volume.fstype = 'ext3' > block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD' > block.is_volume = true > block.minor = 3 (0x3) > block.major = 8 (0x8) > block.device = '/dev/sda3' > linux.hotplug_type = 3 (0x3) > info.parent = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD' > linux.sysfs_path_device = '/sys/block/sda/sda3' > linux.sysfs_path = '/sys/block/sda/sda3' > > 14: udi = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD' > storage.policy.should_mount = false > block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD' > info.udi = '/org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD' > storage.serial = 'VN6BHECBDYJ8YD' > storage.requires_eject = false > storage.hotpluggable = false > info.capabilities = { 'storage', 'block' } > info.category = 'storage' > info.product = 'HDS722580VLSA80' > info.vendor = 'ATA' > storage.removable = false > storage.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0_scsi_device_lun0' > storage.lun = 0 (0x0) > storage.drive_type = 'disk' > storage.vendor = 'ATA' > storage.model = 'HDS722580VLSA80' > storage.automount_enabled_hint = true > storage.media_check_enabled = false > storage.no_partitions_hint = false > storage.bus = 'scsi' > block.is_volume = false > block.minor = 0 (0x0) > block.major = 8 (0x8) > block.device = '/dev/sda' > linux.hotplug_type = 3 (0x3) > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0_scsi_device_lun0' > linux.sysfs_path_device = '/sys/block/sda' > linux.sysfs_path = '/sys/block/sda' > > 15: udi = '/org/freedesktop/Hal/devices/computer_storage' > storage.fstype = 'floppyfss' > storage.mount_point = '/media/floppy' > storage.is_mounted = true > info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' } > resmgr.class = 'floppy' > info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' } > storage.policy.desired_mount_point = 'floppy' > storage.policy.mount_filesystem = 'auto' > storage.policy.should_mount = true > block.storage_device = '/org/freedesktop/Hal/devices/computer_storage' > info.udi = '/org/freedesktop/Hal/devices/computer_storage' > info.capabilities = { 'storage', 'block' } > info.category = 'storage' > storage.requires_eject = false > storage.hotpluggable = false > storage.removable = true > info.parent = '/org/freedesktop/Hal/devices/computer' > storage.physical_device = '/org/freedesktop/Hal/devices/computer' > storage.drive_type = 'floppy' > info.product = 'PC Floppy Drive' > info.vendor = '' > storage.vendor = 'PC Floppy Drive' > storage.model = '' > storage.automount_enabled_hint = true > storage.media_check_enabled = false > storage.no_partitions_hint = true > storage.bus = 'platform' > block.is_volume = false > block.minor = 0 (0x0) > block.major = 2 (0x2) > block.device = '/dev/fd0' > linux.hotplug_type = 3 (0x3) > linux.sysfs_path_device = '/sys/block/fd0' > linux.sysfs_path = '/sys/block/fd0' > > 16: udi = '/org/freedesktop/Hal/devices/storage_model_LITE_ON_DVD_SOHD_167T' > info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' } > resmgr.class = 'cdrom' > info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' } > info.addons = { 'hald-addon-storage' } > storage.policy.desired_mount_point = 'cdrom' > storage.policy.mount_filesystem = 'auto' > storage.policy.should_mount = true > block.storage_device = '/org/freedesktop/Hal/devices/storage_model_LITE_ON_DVD_SOHD_167T' > info.udi = '/org/freedesktop/Hal/devices/storage_model_LITE_ON_DVD_SOHD_167T' > storage.cdrom.write_speed = 0 (0x0) > storage.cdrom.read_speed = 8467 (0x2113) > storage.cdrom.support_media_changed = true > storage.cdrom.dvdplusrdl = false > storage.cdrom.dvdplusrw = false > storage.cdrom.dvdplusr = false > storage.cdrom.dvdram = false > storage.cdrom.dvdrw = false > storage.cdrom.dvdr = false > storage.cdrom.dvd = true > storage.cdrom.cdrw = false > storage.cdrom.cdr = false > storage.firmware_version = '9S15' > storage.requires_eject = true > storage.hotpluggable = false > info.capabilities = { 'storage', 'block', 'storage.cdrom' } > info.category = 'storage' > info.product = 'LITE-ON DVD SOHD-167T' > storage.removable = true > storage.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5229_ide_0_1' > storage.drive_type = 'cdrom' > storage.vendor = '' > storage.model = 'LITE-ON DVD SOHD-167T' > storage.automount_enabled_hint = true > storage.media_check_enabled = true > storage.no_partitions_hint = true > storage.bus = 'ide' > block.is_volume = false > block.minor = 64 (0x40) > block.major = 3 (0x3) > block.device = '/dev/hdb' > linux.hotplug_type = 3 (0x3) > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5229_ide_0_1' > linux.sysfs_path_device = '/sys/block/hdb' > linux.sysfs_path = '/sys/block/hdb' > > 17: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' > info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.class = 'sound' > resmgr.device = '/dev/snd/timer' > linux.device_file = '/dev/snd/timer' > linux.subsystem = 'sound' > linux.hotplug_type = 2 (0x2) > alsa.device_file = '/dev/snd/timer' > info.product = 'ALSA Timer Device' > alsa.type = 'timer' > info.capabilities = { 'alsa' } > info.category = 'alsa' > info.parent = '/org/freedesktop/Hal/devices/computer' > linux.sysfs_path = '/sys/class/sound/timer' > > 18: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port' > info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port' > linux.subsystem = 'serio' > linux.hotplug_type = 1 (0x1) > info.product = 'i8042 Aux Port' > serio.description = 'i8042 Aux Port' > serio.id = 'serio0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'serio' > linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0' > linux.sysfs_path = '/sys/devices/platform/i8042/serio0' > > 19: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input' > info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input' > input.product = 'AT Translated Set 2 keyboard' > info.product = 'AT Translated Set 2 keyboard' > linux.device_file = '/dev/input/event1' > linux.subsystem = 'input' > linux.hotplug_type = 2 (0x2) > input.device = '/dev/input/event1' > info.capabilities = { 'input', 'input.keyboard' } > info.category = 'input' > info.parent = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port' > input.physical_device = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port' > linux.sysfs_path = '/sys/class/input/event1' > > 20: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port' > info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port' > linux.subsystem = 'serio' > linux.hotplug_type = 1 (0x1) > info.product = 'i8042 Kbd Port' > serio.description = 'i8042 Kbd Port' > serio.id = 'serio1' > info.linux.driver = 'atkbd' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'serio' > linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1' > linux.sysfs_path = '/sys/devices/platform/i8042/serio1' > > 21: udi = '/org/freedesktop/Hal/devices/pci_10b9_1689' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_1689' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x0000)' > pci.subsys_vendor = 'Unknown (0x0000)' > info.product = 'M1689 K8 Northbridge [Super K8 Single Chip]' > pci.product = 'M1689 K8 Northbridge [Super K8 Single Chip]' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 6 (0x6) > pci.subsys_vendor_id = 0 (0x0) > pci.subsys_product_id = 0 (0x0) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 5769 (0x1689) > info.linux.driver = 'agpgart-amd64' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' > > 22: udi = '/org/freedesktop/Hal/devices/pci_10de_2d' > info.udi = '/org/freedesktop/Hal/devices/pci_10de_2d' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'MSI-8808' > pci.subsys_vendor = 'Micro-Star International Co., Ltd.' > info.product = 'NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]' > pci.product = 'NV5M64 [RIVA TNT2 Model 64/Model 64 Pro]' > info.vendor = 'nVidia Corporation' > pci.vendor = 'nVidia Corporation' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 3 (0x3) > pci.subsys_vendor_id = 5218 (0x1462) > pci.subsys_product_id = 34824 (0x8808) > pci.vendor_id = 4318 (0x10de) > pci.product_id = 45 (0x2d) > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5246' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' > > 23: udi = '/org/freedesktop/Hal/devices/pci_10b9_5246' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5246' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x0000)' > pci.subsys_vendor = 'Unknown (0x0000)' > info.product = 'AGP8X Controller' > pci.product = 'AGP8X Controller' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 4 (0x4) > pci.device_class = 6 (0x6) > pci.subsys_vendor_id = 0 (0x0) > pci.subsys_product_id = 0 (0x0) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 21062 (0x5246) > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' > > 24: udi = '/org/freedesktop/Hal/devices/net_00_90_27_4f_7c_df' > info.udi = '/org/freedesktop/Hal/devices/net_00_90_27_4f_7c_df' > linux.subsystem = 'net' > linux.hotplug_type = 2 (0x2) > net.80203.mac_address = 619134811359ull (0x90274f7cdfull) > info.product = 'Networking Interface' > net.interface_up = true > net.arp_proto_hw_id = 1 (0x1) > net.linux.ifindex = 3 (0x3) > net.address = '00:90:27:4f:7c:df' > net.interface = 'eth1' > net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_1229' > info.capabilities = { 'net', 'net.80203' } > info.category = 'net.80203' > info.parent = '/org/freedesktop/Hal/devices/pci_8086_1229' > linux.sysfs_path = '/sys/class/net/eth1' > > 25: udi = '/org/freedesktop/Hal/devices/pci_8086_1229' > info.udi = '/org/freedesktop/Hal/devices/pci_8086_1229' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'EtherExpress PRO/100+' > pci.subsys_vendor = 'Intel Corporation' > info.product = '82557/8/9 [Ethernet Pro 100]' > pci.product = '82557/8/9 [Ethernet Pro 100]' > info.vendor = 'Intel Corporation' > pci.vendor = 'Intel Corporation' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 2 (0x2) > pci.subsys_vendor_id = 32902 (0x8086) > pci.subsys_product_id = 9 (0x9) > pci.vendor_id = 32902 (0x8086) > pci.product_id = 4649 (0x1229) > info.linux.driver = 'e100' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:06.0' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5249' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:06.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/0000:02:06.0' > > 26: udi = '/org/freedesktop/Hal/devices/pci_10b9_5249' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5249' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x0000)' > pci.subsys_vendor = 'Unknown (0x0000)' > info.product = 'M5249 HTT to PCI Bridge' > pci.product = 'M5249 HTT to PCI Bridge' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 1 (0x1) > pci.device_subclass = 4 (0x4) > pci.device_class = 6 (0x6) > pci.subsys_vendor_id = 0 (0x0) > pci.subsys_product_id = 0 (0x0) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 21065 (0x5249) > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' > > 27: udi = '/org/freedesktop/Hal/devices/pci_10b9_1563' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_1563' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x1563)' > pci.subsys_vendor = 'ASRock Incorporation' > info.product = 'M1563 HyperTransport South Bridge' > pci.product = 'M1563 HyperTransport South Bridge' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 1 (0x1) > pci.device_class = 6 (0x6) > pci.subsys_vendor_id = 6217 (0x1849) > pci.subsys_product_id = 5475 (0x1563) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 5475 (0x1563) > info.linux.driver = 'ali1563_i2c' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0' > > 28: udi = '/org/freedesktop/Hal/devices/pci_10b9_7101' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_7101' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x7101)' > pci.subsys_vendor = 'ASRock Incorporation' > info.product = 'M7101 Power Management Controller [PMU]' > pci.product = 'M7101 Power Management Controller [PMU]' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 128 (0x80) > pci.device_class = 6 (0x6) > pci.subsys_vendor_id = 6217 (0x1849) > pci.subsys_product_id = 28929 (0x7101) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 28929 (0x7101) > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.1' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.1' > > 29: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_playback_0_2' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_playback_0_2' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.class = 'sound' > resmgr.device = '/dev/snd/pcmC0D2p' > linux.device_file = '/dev/snd/pcmC0D2p' > linux.subsystem = 'sound' > linux.hotplug_type = 2 (0x2) > info.product = 'ALi M5455 - IEC958 ALSA Playback Device' > alsa.type = 'playback' > alsa.device_id = 'ALi M5455 - IEC958' > alsa.card_id = 'M5455' > alsa.device = 2 (0x2) > alsa.card = 0 (0x0) > alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455' > alsa.device_file = '/dev/snd/pcmC0D2p' > info.capabilities = { 'alsa' } > info.category = 'alsa' > linux.sysfs_path = '/sys/class/sound/pcmC0D2p' > > 30: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_2' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_2' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.class = 'sound' > resmgr.device = '/dev/snd/pcmC0D2c' > linux.device_file = '/dev/snd/pcmC0D2c' > linux.subsystem = 'sound' > linux.hotplug_type = 2 (0x2) > info.product = 'ALi M5455 - IEC958 ALSA Capture Device' > alsa.type = 'capture' > alsa.device_id = 'ALi M5455 - IEC958' > alsa.card_id = 'M5455' > alsa.device = 2 (0x2) > alsa.card = 0 (0x0) > alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455' > alsa.device_file = '/dev/snd/pcmC0D2c' > info.capabilities = { 'alsa' } > info.category = 'alsa' > linux.sysfs_path = '/sys/class/sound/pcmC0D2c' > > 31: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_1' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_1' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.class = 'sound' > resmgr.device = '/dev/snd/pcmC0D1c' > linux.device_file = '/dev/snd/pcmC0D1c' > linux.subsystem = 'sound' > linux.hotplug_type = 2 (0x2) > info.product = 'ALi M5455 - MIC ADC ALSA Capture Device' > alsa.type = 'capture' > alsa.device_id = 'ALi M5455 - MIC ADC' > alsa.card_id = 'M5455' > alsa.device = 1 (0x1) > alsa.card = 0 (0x0) > alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455' > alsa.device_file = '/dev/snd/pcmC0D1c' > info.capabilities = { 'alsa' } > info.category = 'alsa' > linux.sysfs_path = '/sys/class/sound/pcmC0D1c' > > 32: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_playback_0_0' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_playback_0_0' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.class = 'sound' > resmgr.device = '/dev/snd/pcmC0D0p' > linux.device_file = '/dev/snd/pcmC0D0p' > linux.subsystem = 'sound' > linux.hotplug_type = 2 (0x2) > info.product = 'ALi M5455 ALSA Playback Device' > alsa.type = 'playback' > alsa.device_id = 'ALi M5455' > alsa.card_id = 'M5455' > alsa.device = 0 (0x0) > alsa.card = 0 (0x0) > alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455' > alsa.device_file = '/dev/snd/pcmC0D0p' > info.capabilities = { 'alsa' } > info.category = 'alsa' > linux.sysfs_path = '/sys/class/sound/pcmC0D0p' > > 33: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_0' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_capture_0_0' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.class = 'sound' > resmgr.device = '/dev/snd/pcmC0D0c' > linux.device_file = '/dev/snd/pcmC0D0c' > linux.subsystem = 'sound' > linux.hotplug_type = 2 (0x2) > info.product = 'ALi M5455 ALSA Capture Device' > alsa.type = 'capture' > alsa.device_id = 'ALi M5455' > alsa.card_id = 'M5455' > alsa.device = 0 (0x0) > alsa.card = 0 (0x0) > alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455' > alsa.device_file = '/dev/snd/pcmC0D0c' > info.capabilities = { 'alsa' } > info.category = 'alsa' > linux.sysfs_path = '/sys/class/sound/pcmC0D0c' > > 34: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_control_0__1' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_alsa_control_0__1' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.class = 'sound' > resmgr.device = '/dev/snd/controlC0' > linux.device_file = '/dev/snd/controlC0' > linux.subsystem = 'sound' > linux.hotplug_type = 2 (0x2) > info.product = 'M5455 ALSA Control Device' > alsa.card_id = 'M5455' > alsa.type = 'control' > alsa.card = 0 (0x0) > alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455' > alsa.device_file = '/dev/snd/controlC0' > info.capabilities = { 'alsa' } > info.category = 'alsa' > linux.sysfs_path = '/sys/class/sound/controlC0' > > 35: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_mixer_0__1' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_mixer_0__1' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.class = 'sound' > resmgr.device = '/dev/mixer' > linux.device_file = '/dev/mixer' > linux.subsystem = 'sound' > linux.hotplug_type = 2 (0x2) > info.product = 'ALi M5455 OSS Control Device' > oss.type = 'mixer' > oss.device_id = 'ALi M5455' > oss.card_id = 'M5455' > oss.card = 0 (0x0) > oss.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455' > oss.device_file = '/dev/mixer' > info.capabilities = { 'oss' } > info.category = 'oss' > linux.sysfs_path = '/sys/class/sound/mixer' > > 36: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_0_0' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_0_0' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.class = 'sound' > resmgr.device = '/dev/dsp' > linux.device_file = '/dev/dsp' > linux.subsystem = 'sound' > linux.hotplug_type = 2 (0x2) > info.product = 'ALi M5455 OSS PCM Device' > oss.type = 'pcm' > oss.device = 0 (0x0) > oss.device_id = 'ALi M5455' > oss.card_id = 'M5455' > oss.card = 0 (0x0) > oss.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455' > oss.device_file = '/dev/dsp' > info.capabilities = { 'oss' } > info.category = 'oss' > linux.sysfs_path = '/sys/class/sound/dsp' > > 37: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_0' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_0' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.class = 'sound' > resmgr.device = '/dev/audio' > linux.device_file = '/dev/audio' > linux.subsystem = 'sound' > linux.hotplug_type = 2 (0x2) > info.product = 'ALi M5455 OSS PCM Device' > oss.type = 'pcm' > oss.device = 0 (0x0) > oss.device_id = 'ALi M5455' > oss.card_id = 'M5455' > oss.card = 0 (0x0) > oss.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455' > oss.device_file = '/dev/audio' > info.capabilities = { 'oss' } > info.category = 'oss' > linux.sysfs_path = '/sys/class/sound/audio' > > 38: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_1' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455_oss_pcm_0_1' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.class = 'sound' > resmgr.device = '/dev/adsp' > linux.device_file = '/dev/adsp' > linux.subsystem = 'sound' > linux.hotplug_type = 2 (0x2) > info.product = 'ALi M5455 OSS PCM Device' > oss.type = 'pcm' > oss.device = 1 (0x1) > oss.device_id = 'ALi M5455' > oss.card_id = 'M5455' > oss.card = 0 (0x0) > oss.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5455' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5455' > oss.device_file = '/dev/adsp' > info.capabilities = { 'oss' } > info.category = 'oss' > linux.sysfs_path = '/sys/class/sound/adsp' > > 39: udi = '/org/freedesktop/Hal/devices/pci_10b9_5455' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5455' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x0850)' > pci.subsys_vendor = 'ASRock Incorporation' > info.product = 'M5455 PCI AC-Link Controller Audio Device' > pci.product = 'M5455 PCI AC-Link Controller Audio Device' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 1 (0x1) > pci.device_class = 4 (0x4) > pci.subsys_vendor_id = 6217 (0x1849) > pci.subsys_product_id = 2128 (0x850) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 21589 (0x5455) > info.linux.driver = 'Intel ICH' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:04.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' > > 40: udi = '/org/freedesktop/Hal/devices/net_00_0b_6a_7b_ad_7b' > info.udi = '/org/freedesktop/Hal/devices/net_00_0b_6a_7b_ad_7b' > linux.subsystem = 'net' > linux.hotplug_type = 2 (0x2) > net.80203.mac_address = 49031130491ull (0xb6a7bad7bull) > info.product = 'Networking Interface' > net.interface_up = false > net.arp_proto_hw_id = 1 (0x1) > net.linux.ifindex = 2 (0x2) > net.address = '00:0b:6a:7b:ad:7b' > net.interface = 'eth0' > net.physical_device = '/org/freedesktop/Hal/devices/pci_10b9_5263' > info.capabilities = { 'net', 'net.80203' } > info.category = 'net.80203' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5263' > linux.sysfs_path = '/sys/class/net/eth0' > > 41: udi = '/org/freedesktop/Hal/devices/pci_10b9_5263' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5263' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x5263)' > pci.subsys_vendor = 'ASRock Incorporation' > info.product = 'M5263 Ethernet Controller' > pci.product = 'M5263 Ethernet Controller' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 2 (0x2) > pci.subsys_vendor_id = 6217 (0x1849) > pci.subsys_product_id = 21091 (0x5263) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 21091 (0x5263) > info.linux.driver = 'tulip' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0d.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0' > > 42: udi = '/org/freedesktop/Hal/devices/pci_10b9_5229_ide_0_1' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5229_ide_0_1' > linux.subsystem = 'ide' > linux.hotplug_type = 1 (0x1) > info.product = 'IDE device (slave)' > ide.channel = 1 (0x1) > ide.host = 0 (0x0) > info.linux.driver = 'ide-cdrom' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5229' > info.bus = 'ide' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0/ide0/0.1' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/ide0/0.1' > > 43: udi = '/org/freedesktop/Hal/devices/pci_10b9_5229' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5229' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x5229)' > pci.subsys_vendor = 'ALi Corporation' > info.product = 'M5229 IDE' > pci.product = 'M5229 IDE' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 250 (0xfa) > pci.device_subclass = 1 (0x1) > pci.device_class = 1 (0x1) > pci.subsys_vendor_id = 4281 (0x10b9) > pci.subsys_product_id = 21033 (0x5229) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 21033 (0x5229) > info.linux.driver = 'ALI15x3_IDE' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0' > > 44: udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0_scsi_device_lun0' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0_scsi_device_lun0' > linux.subsystem = 'scsi' > linux.hotplug_type = 1 (0x1) > info.product = 'SCSI Device' > info.linux.driver = 'sd' > scsi.lun = 0 (0x0) > scsi.target = 0 (0x0) > scsi.bus = 0 (0x0) > scsi.host = 0 (0x0) > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0' > info.bus = 'scsi' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.1/host0/target0:0:0/0:0:0:0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.1/host0/target0:0:0/0:0:0:0' > > 45: udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host_0' > linux.subsystem = 'scsi_host' > linux.hotplug_type = 2 (0x2) > scsi_host.host = 0 (0x0) > info.product = 'SCSI Host Adapter' > info.capabilities = { 'scsi_host' } > info.category = 'scsi_host' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5289' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.1/host0' > linux.sysfs_path = '/sys/class/scsi_host/host0' > > 46: udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5289_scsi_host' > linux.subsystem = 'scsi_host' > linux.hotplug_type = 2 (0x2) > scsi_host.host = 1 (0x1) > info.product = 'SCSI Host Adapter' > info.capabilities = { 'scsi_host' } > info.category = 'scsi_host' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5289' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.1/host1' > linux.sysfs_path = '/sys/class/scsi_host/host1' > > 47: udi = '/org/freedesktop/Hal/devices/pci_10b9_5289' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5289' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x5289)' > pci.subsys_vendor = 'ASRock Incorporation' > info.product = 'ULi 5289 SATA' > pci.product = 'ULi 5289 SATA' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 143 (0x8f) > pci.device_subclass = 128 (0x80) > pci.device_class = 1 (0x1) > pci.subsys_vendor_id = 6217 (0x1849) > pci.subsys_product_id = 21129 (0x5289) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 21129 (0x5289) > info.linux.driver = 'sata_uli' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.1' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.1' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.1' > > 48: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0_if0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0_if0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > info.product = 'USB Hub Interface' > usb.interface.protocol = 0 (0x0) > usb.interface.subclass = 0 (0x0) > usb.interface.class = 9 (0x9) > usb.interface.number = 0 (0x0) > info.linux.driver = 'hub' > usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0' > usb.configuration_value = 1 (0x1) > usb.num_configurations = 1 (0x1) > usb.num_interfaces = 1 (0x1) > usb.device_class = 9 (0x9) > usb.device_subclass = 0 (0x0) > usb.device_protocol = 0 (0x0) > usb.vendor_id = 0 (0x0) > usb.product_id = 0 (0x0) > usb.vendor = 'Linux 2.6.13-3-default ohci_hcd' > usb.product = 'USB Hub Interface' > usb.device_revision_bcd = 518 (0x206) > usb.max_power = 0 (0x0) > usb.num_ports = 3 (0x3) > usb.linux.device_number = 1 (0x1) > usb.serial = '0000:00:0f.0' > usb.speed_bcd = 4608 (0x1200) > usb.version_bcd = 272 (0x110) > usb.is_self_powered = true > usb.can_wake_up = false > usb.bus_number = 1 (0x1) > info.bus = 'usb' > info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0' > > 49: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > usb_device.bus_number = 1 (0x1) > usb_device.can_wake_up = false > usb_device.is_self_powered = true > usb_device.version_bcd = 272 (0x110) > usb_device.speed_bcd = 4608 (0x1200) > usb_device.serial = '0000:00:0f.0' > usb_device.linux.device_number = 1 (0x1) > usb_device.num_ports = 3 (0x3) > usb_device.max_power = 0 (0x0) > usb_device.device_revision_bcd = 518 (0x206) > info.product = 'OHCI Host Controller' > usb_device.product = 'OHCI Host Controller' > info.vendor = 'Linux 2.6.13-3-default ohci_hcd' > usb_device.vendor = 'Linux 2.6.13-3-default ohci_hcd' > usb_device.product_id = 0 (0x0) > usb_device.vendor_id = 0 (0x0) > usb_device.device_protocol = 0 (0x0) > usb_device.device_subclass = 0 (0x0) > usb_device.device_class = 9 (0x9) > usb_device.num_interfaces = 1 (0x1) > usb_device.num_configurations = 1 (0x1) > usb_device.configuration_value = 1 (0x1) > usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1' > info.linux.driver = 'usb' > info.bus = 'usb_device' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5237_1' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0/usb1' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0/usb1' > > 50: udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_1' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_1' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x5237)' > pci.subsys_vendor = 'ASRock Incorporation' > info.product = 'USB 1.1 Controller' > pci.product = 'USB 1.1 Controller' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 16 (0x10) > pci.device_subclass = 3 (0x3) > pci.device_class = 12 (0xc) > pci.subsys_vendor_id = 6217 (0x1849) > pci.subsys_product_id = 21047 (0x5237) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 21047 (0x5237) > info.linux.driver = 'ohci_hcd' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.0' > > 51: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1_if0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1_if0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > info.product = 'USB Hub Interface' > usb.interface.protocol = 0 (0x0) > usb.interface.subclass = 0 (0x0) > usb.interface.class = 9 (0x9) > usb.interface.number = 0 (0x0) > info.linux.driver = 'hub' > usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0' > usb.configuration_value = 1 (0x1) > usb.num_configurations = 1 (0x1) > usb.num_interfaces = 1 (0x1) > usb.device_class = 9 (0x9) > usb.device_subclass = 0 (0x0) > usb.device_protocol = 0 (0x0) > usb.vendor_id = 0 (0x0) > usb.product_id = 0 (0x0) > usb.vendor = 'Linux 2.6.13-3-default ohci_hcd' > usb.product = 'USB Hub Interface' > usb.device_revision_bcd = 518 (0x206) > usb.max_power = 0 (0x0) > usb.num_ports = 3 (0x3) > usb.linux.device_number = 1 (0x1) > usb.serial = '0000:00:0f.1' > usb.speed_bcd = 4608 (0x1200) > usb.version_bcd = 272 (0x110) > usb.is_self_powered = true > usb.can_wake_up = false > usb.bus_number = 2 (0x2) > info.bus = 'usb' > info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0' > > 52: udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0_logicaldev_input' > info.udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0_logicaldev_input' > info.callouts.remove = { 'hal-resmgr' } > info.callouts.add = { 'hal-resmgr' } > resmgr.hack.add_usb_parent = true > resmgr.class = 'input' > resmgr.device = '/dev/input/event2' > input.product = '1241:1111' > info.product = '1241:1111' > linux.device_file = '/dev/input/event2' > linux.subsystem = 'input' > linux.hotplug_type = 2 (0x2) > input.device = '/dev/input/event2' > info.capabilities = { 'input', 'input.mouse' } > info.category = 'input' > info.parent = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0' > input.physical_device = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0' > linux.sysfs_path = '/sys/class/input/event2' > > 53: udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > info.product = 'USB HID Interface' > usb.interface.protocol = 2 (0x2) > usb.interface.subclass = 1 (0x1) > usb.interface.class = 3 (0x3) > usb.interface.number = 0 (0x0) > info.linux.driver = 'usbhid' > usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-2/2-2:1.0' > usb.configuration_value = 1 (0x1) > usb.num_configurations = 1 (0x1) > usb.num_interfaces = 1 (0x1) > usb.device_class = 0 (0x0) > usb.device_subclass = 0 (0x0) > usb.device_protocol = 0 (0x0) > usb.vendor_id = 4673 (0x1241) > usb.product_id = 4369 (0x1111) > usb.vendor = 'Belkin' > usb.product = 'USB HID Interface' > usb.device_revision_bcd = 256 (0x100) > usb.max_power = 100 (0x64) > usb.num_ports = 0 (0x0) > usb.linux.device_number = 5 (0x5) > usb.speed_bcd = 336 (0x150) > usb.version_bcd = 256 (0x100) > usb.is_self_powered = false > usb.can_wake_up = true > usb.bus_number = 2 (0x2) > info.bus = 'usb' > info.parent = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-2/2-2:1.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-2/2-2:1.0' > > 54: udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial' > info.udi = '/org/freedesktop/Hal/devices/usb_device_1241_1111_noserial' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > usb_device.bus_number = 2 (0x2) > usb_device.can_wake_up = true > usb_device.is_self_powered = false > usb_device.version_bcd = 256 (0x100) > usb_device.speed_bcd = 336 (0x150) > usb_device.linux.device_number = 5 (0x5) > usb_device.num_ports = 0 (0x0) > usb_device.max_power = 100 (0x64) > usb_device.device_revision_bcd = 256 (0x100) > info.product = 'Mouse' > usb_device.product = 'Mouse' > info.vendor = 'Belkin' > usb_device.vendor = 'Belkin' > usb_device.product_id = 4369 (0x1111) > usb_device.vendor_id = 4673 (0x1241) > usb_device.device_protocol = 0 (0x0) > usb_device.device_subclass = 0 (0x0) > usb_device.device_class = 0 (0x0) > usb_device.num_interfaces = 1 (0x1) > usb_device.num_configurations = 1 (0x1) > usb_device.configuration_value = 1 (0x1) > usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-2' > info.linux.driver = 'usb' > info.bus = 'usb_device' > info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-2' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2/2-2' > > 55: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > usb_device.bus_number = 2 (0x2) > usb_device.can_wake_up = false > usb_device.is_self_powered = true > usb_device.version_bcd = 272 (0x110) > usb_device.speed_bcd = 4608 (0x1200) > usb_device.serial = '0000:00:0f.1' > usb_device.linux.device_number = 1 (0x1) > usb_device.num_ports = 3 (0x3) > usb_device.max_power = 0 (0x0) > usb_device.device_revision_bcd = 518 (0x206) > info.product = 'OHCI Host Controller' > usb_device.product = 'OHCI Host Controller' > info.vendor = 'Linux 2.6.13-3-default ohci_hcd' > usb_device.vendor = 'Linux 2.6.13-3-default ohci_hcd' > usb_device.product_id = 0 (0x0) > usb_device.vendor_id = 0 (0x0) > usb_device.device_protocol = 0 (0x0) > usb_device.device_subclass = 0 (0x0) > usb_device.device_class = 9 (0x9) > usb_device.num_interfaces = 1 (0x1) > usb_device.num_configurations = 1 (0x1) > usb_device.configuration_value = 1 (0x1) > usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2' > info.linux.driver = 'usb' > info.bus = 'usb_device' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5237_0' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1/usb2' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1/usb2' > > 56: udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_0' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5237_0' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x5237)' > pci.subsys_vendor = 'ASRock Incorporation' > info.product = 'USB 1.1 Controller' > pci.product = 'USB 1.1 Controller' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 16 (0x10) > pci.device_subclass = 3 (0x3) > pci.device_class = 12 (0xc) > pci.subsys_vendor_id = 6217 (0x1849) > pci.subsys_product_id = 21047 (0x5237) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 21047 (0x5237) > info.linux.driver = 'ohci_hcd' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.1' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.1' > > 57: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2_if0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2_if0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > info.product = 'USB Hub Interface' > usb.interface.protocol = 0 (0x0) > usb.interface.subclass = 0 (0x0) > usb.interface.class = 9 (0x9) > usb.interface.number = 0 (0x0) > info.linux.driver = 'hub' > usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0' > usb.configuration_value = 1 (0x1) > usb.num_configurations = 1 (0x1) > usb.num_interfaces = 1 (0x1) > usb.device_class = 9 (0x9) > usb.device_subclass = 0 (0x0) > usb.device_protocol = 0 (0x0) > usb.vendor_id = 0 (0x0) > usb.product_id = 0 (0x0) > usb.vendor = 'Linux 2.6.13-3-default ohci_hcd' > usb.product = 'USB Hub Interface' > usb.device_revision_bcd = 518 (0x206) > usb.max_power = 0 (0x0) > usb.num_ports = 3 (0x3) > usb.linux.device_number = 1 (0x1) > usb.serial = '0000:00:0f.2' > usb.speed_bcd = 4608 (0x1200) > usb.version_bcd = 272 (0x110) > usb.is_self_powered = true > usb.can_wake_up = false > usb.bus_number = 3 (0x3) > info.bus = 'usb' > info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0' > > 58: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > usb_device.bus_number = 3 (0x3) > usb_device.can_wake_up = false > usb_device.is_self_powered = true > usb_device.version_bcd = 272 (0x110) > usb_device.speed_bcd = 4608 (0x1200) > usb_device.serial = '0000:00:0f.2' > usb_device.linux.device_number = 1 (0x1) > usb_device.num_ports = 3 (0x3) > usb_device.max_power = 0 (0x0) > usb_device.device_revision_bcd = 518 (0x206) > info.product = 'OHCI Host Controller' > usb_device.product = 'OHCI Host Controller' > info.vendor = 'Linux 2.6.13-3-default ohci_hcd' > usb_device.vendor = 'Linux 2.6.13-3-default ohci_hcd' > usb_device.product_id = 0 (0x0) > usb_device.vendor_id = 0 (0x0) > usb_device.device_protocol = 0 (0x0) > usb_device.device_subclass = 0 (0x0) > usb_device.device_class = 9 (0x9) > usb_device.num_interfaces = 1 (0x1) > usb_device.num_configurations = 1 (0x1) > usb_device.configuration_value = 1 (0x1) > usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2/usb3' > info.linux.driver = 'usb' > info.bus = 'usb_device' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5237' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.2/usb3' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2/usb3' > > 59: udi = '/org/freedesktop/Hal/devices/pci_10b9_5237' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5237' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x5237)' > pci.subsys_vendor = 'ASRock Incorporation' > info.product = 'USB 1.1 Controller' > pci.product = 'USB 1.1 Controller' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 16 (0x10) > pci.device_subclass = 3 (0x3) > pci.device_class = 12 (0xc) > pci.subsys_vendor_id = 6217 (0x1849) > pci.subsys_product_id = 21047 (0x5237) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 21047 (0x5237) > info.linux.driver = 'ohci_hcd' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.2' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.2' > > 60: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3_if0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3_if0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > info.product = 'USB Hub Interface' > usb.interface.protocol = 0 (0x0) > usb.interface.subclass = 0 (0x0) > usb.interface.class = 9 (0x9) > usb.interface.number = 0 (0x0) > info.linux.driver = 'hub' > usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0' > usb.configuration_value = 1 (0x1) > usb.num_configurations = 1 (0x1) > usb.num_interfaces = 1 (0x1) > usb.device_class = 9 (0x9) > usb.device_subclass = 0 (0x0) > usb.device_protocol = 1 (0x1) > usb.vendor_id = 0 (0x0) > usb.product_id = 0 (0x0) > usb.vendor = 'Linux 2.6.13-3-default ehci_hcd' > usb.product = 'USB Hub Interface' > usb.device_revision_bcd = 518 (0x206) > usb.max_power = 0 (0x0) > usb.num_ports = 8 (0x8) > usb.linux.device_number = 1 (0x1) > usb.serial = '0000:00:0f.3' > usb.speed_bcd = 294912 (0x48000) > usb.version_bcd = 512 (0x200) > usb.is_self_powered = true > usb.can_wake_up = true > usb.bus_number = 4 (0x4) > info.bus = 'usb' > info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0' > > 61: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > usb_device.bus_number = 4 (0x4) > usb_device.can_wake_up = true > usb_device.is_self_powered = true > usb_device.version_bcd = 512 (0x200) > usb_device.speed_bcd = 294912 (0x48000) > usb_device.serial = '0000:00:0f.3' > usb_device.linux.device_number = 1 (0x1) > usb_device.num_ports = 8 (0x8) > usb_device.max_power = 0 (0x0) > usb_device.device_revision_bcd = 518 (0x206) > info.product = 'EHCI Host Controller' > usb_device.product = 'EHCI Host Controller' > info.vendor = 'Linux 2.6.13-3-default ehci_hcd' > usb_device.vendor = 'Linux 2.6.13-3-default ehci_hcd' > usb_device.product_id = 0 (0x0) > usb_device.vendor_id = 0 (0x0) > usb_device.device_protocol = 1 (0x1) > usb_device.device_subclass = 0 (0x0) > usb_device.device_class = 9 (0x9) > usb_device.num_interfaces = 1 (0x1) > usb_device.num_configurations = 1 (0x1) > usb_device.configuration_value = 1 (0x1) > usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3/usb4' > info.linux.driver = 'usb' > info.bus = 'usb_device' > info.parent = '/org/freedesktop/Hal/devices/pci_10b9_5239' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.3/usb4' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3/usb4' > > 62: udi = '/org/freedesktop/Hal/devices/pci_10b9_5239' > info.udi = '/org/freedesktop/Hal/devices/pci_10b9_5239' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x5239)' > pci.subsys_vendor = 'ASRock Incorporation' > info.product = 'USB 2.0 Controller' > pci.product = 'USB 2.0 Controller' > info.vendor = 'ALi Corporation' > pci.vendor = 'ALi Corporation' > pci.device_protocol = 32 (0x20) > pci.device_subclass = 3 (0x3) > pci.device_class = 12 (0xc) > pci.subsys_vendor_id = 6217 (0x1849) > pci.subsys_product_id = 21049 (0x5239) > pci.vendor_id = 4281 (0x10b9) > pci.product_id = 21049 (0x5239) > info.linux.driver = 'ehci_hcd' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0f.3' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0f.3' > > 63: udi = '/org/freedesktop/Hal/devices/pci_1022_1100' > info.udi = '/org/freedesktop/Hal/devices/pci_1022_1100' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x0000)' > pci.subsys_vendor = 'Unknown (0x0000)' > info.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' > pci.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' > info.vendor = 'Advanced Micro Devices [AMD]' > pci.vendor = 'Advanced Micro Devices [AMD]' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 6 (0x6) > pci.subsys_vendor_id = 0 (0x0) > pci.subsys_product_id = 0 (0x0) > pci.vendor_id = 4130 (0x1022) > pci.product_id = 4352 (0x1100) > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' > > 64: udi = '/org/freedesktop/Hal/devices/pci_1022_1101' > info.udi = '/org/freedesktop/Hal/devices/pci_1022_1101' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x0000)' > pci.subsys_vendor = 'Unknown (0x0000)' > info.product = 'K8 [Athlon64/Opteron] Address Map' > pci.product = 'K8 [Athlon64/Opteron] Address Map' > info.vendor = 'Advanced Micro Devices [AMD]' > pci.vendor = 'Advanced Micro Devices [AMD]' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 6 (0x6) > pci.subsys_vendor_id = 0 (0x0) > pci.subsys_product_id = 0 (0x0) > pci.vendor_id = 4130 (0x1022) > pci.product_id = 4353 (0x1101) > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.1' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' > > 65: udi = '/org/freedesktop/Hal/devices/pci_1022_1102' > info.udi = '/org/freedesktop/Hal/devices/pci_1022_1102' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x0000)' > pci.subsys_vendor = 'Unknown (0x0000)' > info.product = 'K8 [Athlon64/Opteron] DRAM Controller' > pci.product = 'K8 [Athlon64/Opteron] DRAM Controller' > info.vendor = 'Advanced Micro Devices [AMD]' > pci.vendor = 'Advanced Micro Devices [AMD]' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 6 (0x6) > pci.subsys_vendor_id = 0 (0x0) > pci.subsys_product_id = 0 (0x0) > pci.vendor_id = 4130 (0x1022) > pci.product_id = 4354 (0x1102) > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.2' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' > > 66: udi = '/org/freedesktop/Hal/devices/pci_1022_1103' > info.udi = '/org/freedesktop/Hal/devices/pci_1022_1103' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x0000)' > pci.subsys_vendor = 'Unknown (0x0000)' > info.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' > pci.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' > info.vendor = 'Advanced Micro Devices [AMD]' > pci.vendor = 'Advanced Micro Devices [AMD]' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 6 (0x6) > pci.subsys_vendor_id = 0 (0x0) > pci.subsys_product_id = 0 (0x0) > pci.vendor_id = 4130 (0x1022) > pci.product_id = 4355 (0x1103) > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:18.3' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' > > 67: udi = '/org/freedesktop/Hal/devices/computer' > storage.policy.default.mount_option.exec = true > storage.policy.default.mount_option.pamconsole = true > storage.policy.default.mount_option.noauto = true > storage.policy.default.managed_keyword.secondary = 'kudzu' > storage.policy.default.managed_keyword.primary = 'managed' > storage.policy.default.use_managed_keyword = true > storage.policy.default.mount_root = '/media' > org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-set-power-save' } > org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', 'b' } > org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'SetPowerSave' } > info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' } > info.addons = { 'hald-addon-acpi' } > system.product = 'K8 Combo-Z 1.00' > system.vendor = 'TBD' > smbios.system.uuid = '00020003-0004-0005-0006-000700080009' > smbios.system.serial = '00000000' > smbios.system.version = '1.00' > smbios.system.product = 'K8 Combo-Z' > smbios.system.manufacturer = 'TBD' > smbios.bios.release_date = '07/11/2005' > smbios.bios.version = 'L2.23' > smbios.bios.vendor = 'American Megatrends Inc.' > power_management.acpi.linux.version = '20050408' > power_management.type = 'acpi' > power_management.is_enabled = true > system.formfactor = 'unknown' > system.kernel.machine = 'x86_64' > system.kernel.version = '2.6.13-3-default' > system.kernel.name = 'Linux' > info.udi = '/org/freedesktop/Hal/devices/computer' > info.product = 'Computer' > linux.sysfs_path_device = '(none)' > info.bus = 'unknown' >----- hal device list end ----- >>> floppy.1: get nvram >----- /proc/nvram ----- > Checksum status: valid > # floppies : 1 > Floppy 0 type : 3.5'' 1.44M > Floppy 1 type : none > HD 0 type : none > HD 1 type : none > HD type 48 data: 0/0/0 C/H/S, precomp 0, lz 0 > HD type 49 data: 511/0/0 C/H/S, precomp 0, lz 0 > DOS base memory: 640 kB > Extended memory: 65535 kB (configured), 65535 kB (tested) > Gfx adapter : EGA, VGA, ... (with BIOS) > FPU : installed >----- /proc/nvram end ----- >>> floppy.2: nvram info >>> bios.1: cmdline >>> bios.1.1: apm >>> bios.2: ram > bios: 0 disks >>> bios.2: rom >>> bios.3: smp >----- BIOS data 0x00400 - 0x004ff ----- > 400 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 410 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 420 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 430 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 440 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 450 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 460 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 470 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 480 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 490 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 4a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 4b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 4c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 4d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 4e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 4f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" >----- BIOS data end ----- >>> bios.4: vbe > klog: pci config type 1 >VBE: Could not init Int10 >>> bios.5: 32 >>> sys.1: cpu >>> misc.9: kernel log >----- kernel log ----- > <4>Bootdata ok (command line is root=/dev/sda2 vga=0x31a selinux=0 resume=/dev/sda1 splash=silent console=ttyS0,115200) > <5>Linux version 2.6.13-3-default (geeko@buildhost) (gcc version 4.0.2 20050826 (prerelease) (SUSE Linux)) #1 Mon Aug 29 19:48:23 UTC 2005 > <6>BIOS-provided physical RAM map: > <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > <4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) > <4> BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable) > <4> BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data) > <4> BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS) > <4> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) > <4> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) > <7>ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f98b0 > <7>ACPI: RSDT (v001 A M I OEMRSDT 0x07000511 MSFT 0x00000097) @ 0x000000001ffb0000 > <7>ACPI: FADT (v001 A M I OEMFACP 0x07000511 MSFT 0x00000097) @ 0x000000001ffb0200 > <7>ACPI: MADT (v001 A M I OEMAPIC 0x07000511 MSFT 0x00000097) @ 0x000000001ffb0390 > <7>ACPI: OEMB (v001 A M I AMI_OEM 0x07000511 MSFT 0x00000097) @ 0x000000001ffc0040 > <7>ACPI: DSDT (v001 K8CBZ K8CBZ223 0x00000223 INTL 0x02002026) @ 0x0000000000000000 > <7>On node 0 totalpages: 130895 > <7> DMA zone: 3999 pages, LIFO batch:1 > <7> Normal zone: 126896 pages, LIFO batch:31 > <7> HighMem zone: 0 pages, LIFO batch:1 > <6>ACPI: PM-Timer IO Port: 0x808 > <7>ACPI: Local APIC address 0xfee00000 > <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > <6>Processor #0 15:15 APIC version 16 > <6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) > <6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > <6>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 > <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > <7>ACPI: IRQ0 used by override. > <7>ACPI: IRQ2 used by override. > <7>ACPI: IRQ9 used by override. > <6>Setting APIC routing to flat > <6>Using ACPI (MADT) for SMP configuration information > <6>Allocating PCI resources starting at 20000000 (gap: 20000000:df7c0000) > <4>Checking aperture... > <4>CPU 0: aperture @ f8000000 size 64 MB > <4>Built 1 zonelists > <5>Kernel command line: root=/dev/sda2 vga=0x31a selinux=0 resume=/dev/sda1 splash=silent console=ttyS0,115200 > <6>bootsplash: silent mode. > <4>Initializing CPU#0 > <4>PID hash table entries: 2048 (order: 11, 65536 bytes) > <6>time.c: Using 3.579545 MHz PM timer. > <6>time.c: Detected 2199.974 MHz processor. > <6>time.c: Using PIT/TSC based timekeeping. > <4>Console: colour dummy device 80x25 > <4>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > <4>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > <4>Memory: 507920k/523968k available (2277k kernel code, 15180k reserved, 817k data, 176k init) > <4>Calibrating delay using timer specific routine.. 4403.50 BogoMIPS (lpj=8807016) > <6>Security Framework v1.0.0 initialized > <6>SELinux: Disabled at boot. > <4>Mount-cache hash table entries: 256 > <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > <6>CPU: L2 Cache: 512K (64 bytes/line) > <6>mtrr: v2.0 (20020519) > <4>CPU: AMD Athlon(tm) 64 Processor 3500+ stepping 00 > <6>checking if image is initramfs... it is > <6>ACPI: Looking for DSDT in initrd... not found! > <4> not found! > <6>Using local APIC timer interrupts. > <6>Detected 12.499 MHz APIC timer. > <6>testing NMI watchdog ... OK. > <6>NET: Registered protocol family 16 > <6>ACPI: bus type pci registered > <6>PCI: Using configuration type 1 > <6>ACPI: Subsystem revision 20050408 > <6>ACPI: Interpreter enabled > <6>ACPI: Using IOAPIC for interrupt routing > <6>ACPI: PCI Root Bridge [PCI0] (0000:00) > <4>PCI: Probing PCI hardware (bus 00) > <6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 > <7>Boot video device is 0000:01:00.0 > <6>PCI: Transparent bridge - 0000:00:02.0 > <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT] > <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) > <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) > <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) > <4>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) > <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) > <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) > <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) > <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 > <4>ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15) > <6>PCI: Using ACPI for IRQ routing > <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > <6>PCI: Bridge: 0000:00:01.0 > <6> IO window: disabled. > <6> MEM window: fc600000-fe6fffff > <6> PREFETCH window: f0400000-f43fffff > <6>PCI: Bridge: 0000:00:02.0 > <6> IO window: c000-cfff > <6> MEM window: fe700000-feafffff > <6> PREFETCH window: f4400000-f44fffff > <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 > <7>PCI: Setting latency timer of device 0000:00:02.0 to 64 > <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) > <6>agpgart: Detected AGP bridge 0 > <6>Setting up ULi AGP. > <6>agpgart: AGP aperture is 64M @ 0xf8000000 > <6>PCI-DMA: Disabling IOMMU. > <4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ > <6>audit: initializing netlink socket (disabled) > <4>audit(1125928522.852:1): initialized > <4>Total HugeTLB memory allocated, 0 > <5>VFS: Disk quotas dquot_6.5.1 > <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > <6>Initializing Cryptographic API > <6>vesafb: framebuffer at 0xf2000000, mapped to 0xffffc20000080000, using 10240k, total 32768k > <6>vesafb: mode is 1280x1024x16, linelength=2560, pages=0 > <6>vesafb: scrolling: redraw > <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112693 bytes,<6>...found (1280x1024, 17839 bytes, v3). > <4>Console: switching to colour frame buffer device 158x59 > <6>fb0: VESA VGA frame buffer device > <6>Real Time Clock Driver v1.12 > <6>Non-volatile memory driver v1.2 > <6>Linux agpgart interface v0.101 (c) Dave Jones > <6>serio: i8042 AUX port at 0x60,0x64 irq 12 > <6>serio: i8042 KBD port at 0x60,0x64 irq 1 > <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > <6>io scheduler noop registered > <6>io scheduler anticipatory registered > <6>io scheduler deadline registered > <6>io scheduler cfq registered > <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize > <6>loop: loaded (max 8 devices) > <6>mice: PS/2 mouse device common for all mice > <6>input: PC Speaker > <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 > <6>md: bitmap version 3.38 > <6>NET: Registered protocol family 2 > <4>IP route cache hash table entries: 8192 (order: 4, 65536 bytes) > <4>TCP established hash table entries: 32768 (order: 6, 262144 bytes) > <4>TCP bind hash table entries: 32768 (order: 6, 262144 bytes) > <6>TCP: Hash tables configured (established 32768 bind 32768) > <6>TCP reno registered > <6>NET: Registered protocol family 1 > <4>ACPI wakeup devices: > <4> HTT PS2K UAR1 AC97 MC97 LAN USB0 USB1 USB2 UB20 > <6>ACPI: (supports S0 S1 S3 S4 S5) > <4>Freeing unused kernel memory: 176k freed > <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > <5>SCSI subsystem initialized > <6>input: AT Translated Set 2 keyboard on isa0060/serio0 > <3>udev[819]: main: action, subsystem or devpath missing > <6>ALI15X3: IDE controller at PCI slot 0000:00:0e.0 > <6>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 169 > <6>ALI15X3: chipset revision 199 > <6>ALI15X3: not 100% native mode: will probe irqs later > <6> ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:DMA > <6> ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio > <7>Probing IDE interface ide0... > <4>hdb: LITE-ON DVD SOHD-167T, ATAPI CD/DVD-ROM drive > <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > <7>Probing IDE interface ide1... > <7>libata version 1.12 loaded. > <6>ACPI: PCI Interrupt 0000:00:0e.1[A] -> GSI 19 (level, low) -> IRQ 169 > <6>ata1: SATA max UDMA/133 cmd 0xF80 ctl 0xF02 bmdma 0xD880 irq 169 > <6>ata2: SATA max UDMA/133 cmd 0xE80 ctl 0xE02 bmdma 0xD888 irq 169 > <7>ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e8 86:3c02 87:4023 88:003f > <6>ata1: dev 0 ATA, max UDMA/100, 160836480 sectors: lba48 > <6>ata1: dev 0 configured for UDMA/100 > <6>scsi0 : sata_uli > <6>ata2: no device found (phy stat 00000000) > <6>scsi1 : sata_uli > <5> Vendor: ATA Model: HDS722580VLSA80 Rev: V32O > <5> Type: Direct-Access ANSI SCSI revision: 05 > <5>SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) > <7>Losing some ticks... checking if CPU frequency changed. > <5>SCSI device sda: drive cache: write back > <5>SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) > <5>SCSI device sda: drive cache: write back > <6> sda: sda1 sda2 sda3 > <5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > <6>ACPI: CPU0 (power states: C1[C1]) > <3>udev[883]: run_program: exec of program '/sbin/udev.mount.sh' failed > <5>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 > <3>udev[885]: run_program: exec of program '/sbin/udev.mount.sh' failed > <3>udev[886]: run_program: exec of program '/sbin/udev.mount.sh' failed > <4>Attempting manual resume > <3>swsusp: Suspend partition has wrong signature? > <6>kjournald starting. Commit interval 5 seconds > <6>EXT3 FS on sda2, internal journal > <6>EXT3-fs: mounted filesystem with ordered data mode. > <6>bootsplash: status on console 0 changed to on > <6>md: Autodetecting RAID arrays. > <6>md: autorun ... > <6>md: ... autorun DONE. > <6>Adding 1052216k swap on /dev/sda1. Priority:-1 extents:1 > <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com > <6>kjournald starting. Commit interval 5 seconds > <6>EXT3 FS on sda3, internal journal > <6>EXT3-fs: mounted filesystem with ordered data mode. > <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout. > <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout. > <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout. > <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout. > <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout. > <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout. > <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout. > <4>ALSA sound/pci/ac97/ac97_codec.c:1958: AC'97 1 does not respond - RESET > <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout. > <4>ALSA sound/pci/intel8x0.c:663: intel8x0: AC97 codec ready timeout. > <3>ALSA sound/pci/ac97/ac97_codec.c:1967: AC'97 1 access is not valid [0xffffffff], removing mixer. > <3>ALSA sound/pci/intel8x0.c:2087: Unable to initialize codec #1 > <6>intel8x0_measure_ac97_clock: measured 53329 usecs > <6>intel8x0: clocking to 48000 > <6>ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 185 > <6>ohci_hcd 0000:00:0f.0: OHCI Host Controller > <6>ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 1 > <6>ohci_hcd 0000:00:0f.0: irq 185, io mem 0xfebfd000 > <6>hub 1-0:1.0: USB hub found > <6>hub 1-0:1.0: 3 ports detected > <6>ACPI: PCI Interrupt 0000:00:0f.1[B] -> GSI 21 (level, low) -> IRQ 193 > <6>ohci_hcd 0000:00:0f.1: OHCI Host Controller > <6>ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 2 > <6>ohci_hcd 0000:00:0f.1: irq 193, io mem 0xfebfc000 > <6>Linux Tulip driver version 1.1.13-NAPI (May 11, 2002) > <6>ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 201 > <6>tulip0: EEPROM default media type Autosense. > <6>tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block. > <6>tulip0: Index #1 - Media 10baseT (#0) described by a <unknown> (128) block. > <6>tulip0: Index #2 - Media 10baseT (#0) described by a 21140 non-MII (0) block. > <6>tulip0: Index #3 - Media 10base2 (#1) described by a 21140 non-MII (0) block. > <6>tulip0: Index #4 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block. > <6>tulip0: Index #5 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block. > <6>tulip0: MII transceiver #1 config 0000 status 7849 advertising 01e1. > <6>hub 2-0:1.0: USB hub found > <6>hub 2-0:1.0: 3 ports detected > <6>eth0: ULi M5261/M5263 rev 64 at 000000000001e400, 00:0B:6A:7B:AD:7B, IRQ 201. > <6>ACPI: PCI Interrupt 0000:00:0f.2[C] -> GSI 22 (level, low) -> IRQ 209 > <6>ohci_hcd 0000:00:0f.2: OHCI Host Controller > <6>ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 3 > <6>ohci_hcd 0000:00:0f.2: irq 209, io mem 0xfebfb000 > <3>ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr > <3>ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted. > <6>hub 3-0:1.0: USB hub found > <6>hub 3-0:1.0: 3 ports detected > <4>ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS? > <4>ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted. > <6>usb 2-1: new full speed USB device using ohci_hcd and address 2 > <6>ACPI: PCI Interrupt 0000:00:0f.3[D] -> GSI 23 (level, low) -> IRQ 217 > <6>ehci_hcd 0000:00:0f.3: EHCI Host Controller > <6>ehci_hcd 0000:00:0f.3: debug port 1 > <6>bootsplash: status on console 0 changed to on > <6>ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 4 > <6>ehci_hcd 0000:00:0f.3: irq 217, io mem 0xfebfe800 > <6>ehci_hcd 0000:00:0f.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 > <6>hub 4-0:1.0: USB hub found > <6>hub 4-0:1.0: 8 ports detected > <6>e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI > <6>e100: Copyright(c) 1999-2005 Intel Corporation > <6>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 177 > <6>e100: eth1: e100_probe: addr 0xf44ff000, irq 177, MAC addr 00:90:27:4F:7C:DF > <3>usb 2-1: device not accepting address 2, error -110 > <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found > <6>Floppy drive(s): fd0 is 1.44M > <6>FDC 0 is a post-1991 82077 > <6>usb 2-1: new full speed USB device using ohci_hcd and address 4 > <6>hub 2-1:1.0: USB hub found > <6>hub 2-1:1.0: 4 ports detected > <6>usb 2-2: new low speed USB device using ohci_hcd and address 5 > <6>hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) > <6>Uniform CD-ROM driver Revision: 3.20 > <6>e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex > <6>usb 2-1.3: new full speed USB device using ohci_hcd and address 6 > <6>NET: Registered protocol family 17 > <6>usb 2-1.4: new full speed USB device using ohci_hcd and address 7 > <6>usbcore: registered new driver hiddev > <3>input.c: calling hotplug without a hotplug agent defined > <6>input: USB HID v1.00 Mouse [1241:1111] on usb-0000:00:0f.1-2 > <6>usbcore: registered new driver usbhid > <6>drivers/usb/input/hid-core.c: v2.01:USB HID core driver > <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 > <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 > <6>usbcore: registered new driver usblp > <6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver > <6>ACPI: Power Button (FF) [PWRF] > <6>ACPI: Power Button (CM) [PWRB] > <4>pcc_acpi: module not supported by Novell, setting U taint flag. > <6>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com> > <3>microcode: CPU0 not a capable Intel processor > <6>microcode: No new microcode data for CPU0 > <6>IA-32 Microcode Update Driver v1.14 unregistered > <6>NET: Registered protocol family 10 > <6>Disabled Privacy Extensions on device ffffffff803c9760(lo) > <6>IPv6 over IPv4 tunneling driver > <6>bootsplash: status on console 0 changed to on > <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > <4>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory > <4>NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist > <4>NFSD: starting 90-second grace period > <6>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3) > <6>powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2 (1500 mV) > <6>powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6 (1400 mV) > <6>powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa (1300 mV) > <6>powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0xa (1300 mV) > <4>cpu_init done, current fid 0xe, vid 0x2 > <6>subfs 0.9 > <4>end_request: I/O error, dev fd0, sector 0 > <4>end_request: I/O error, dev fd0, sector 0 > <4>end_request: I/O error, dev fd0, sector 0 > <4>end_request: I/O error, dev fd0, sector 0 > <3>subfs: unsuccessful attempt to mount media (256) > <6>bootsplash: status on console 0 changed to on > <6>usbcore: registered new driver usbserial > <6>drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic > <6>usbcore: registered new driver usbserial_generic > <6>drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 > <6>usb 2-1.4: USB disconnect, address 7 > <6>drivers/usb/class/usblp.c: usblp1: removed > <6>usb 2-1.3: USB disconnect, address 6 > <6>drivers/usb/class/usblp.c: usblp0: removed > <6>usb 2-1: reset full speed USB device using ohci_hcd and address 4 > <6>usb 2-1.3: new full speed USB device using ohci_hcd and address 8 > <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 > <6>usb 2-1.4: new full speed USB device using ohci_hcd and address 9 > <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 > <6>usb 2-1.4: USB disconnect, address 9 > <6>drivers/usb/class/usblp.c: usblp1: removed > <6>usb 2-1: USB disconnect, address 4 > <6>usb 2-1.3: USB disconnect, address 8 > <6>drivers/usb/class/usblp.c: usblp0: removed > <6>usb 2-1: new full speed USB device using ohci_hcd and address 10 > <6>hub 2-1:1.0: USB hub found > <6>hub 2-1:1.0: 4 ports detected > <6>usb 2-1.3: new full speed USB device using ohci_hcd and address 11 > <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 11 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 > <6>usb 2-1.4: new full speed USB device using ohci_hcd and address 12 > <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 > <5>nfs: server wotan not responding, still trying > <5>nfs: server wotan OK >----- kernel log end ----- >>> misc.1: misc data >>> misc.1.1: open serial >>> misc.1.2: open parallel >----- exec: "/sbin/rmmod lp" ----- > ERROR: Removing 'lp': Operation not permitted >----- return code: ? ----- >----- exec: "/sbin/rmmod parport_pc" ----- > ERROR: Module parport_pc is in use >----- return code: ? ----- >----- exec: "/sbin/rmmod parport" ----- > ERROR: Module parport is in use by parport_pc,lp >----- return code: ? ----- >>> misc.1.3: read floppy > read_block0: open(/dev/fd0) failed >>> misc.2.1: io >>> misc.2.2: dma >>> misc.2.3: irq >----- /proc/ioports ----- > 0000-001f : dma1 > 0020-0021 : pic1 > 0040-0043 : timer0 > 0050-0053 : timer1 > 0060-006f : keyboard > 0070-0077 : rtc > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 01f0-01f7 : ide0 > 0378-037a : parport0 > 037b-037f : parport0 > 03c0-03df : vesafb > 03f6-03f6 : ide0 > 03f8-03ff : serial > 0400-040f : i2c-ali1563 > 0800-083f : 0000:00:03.1 > 0800-0803 : PM1a_EVT_BLK > 0804-0805 : PM1a_CNT_BLK > 0808-080b : PM_TMR > 0810-0815 : ACPI CPU throttle > 0818-0827 : GPE0_BLK > 0830-0830 : PM2_CNT_BLK > 0cf8-0cff : PCI conf1 > 0e00-0e03 : 0000:00:0e.1 > 0e00-0e03 : sata_uli > 0e80-0e87 : 0000:00:0e.1 > 0e80-0e87 : sata_uli > 0f00-0f03 : 0000:00:0e.1 > 0f00-0f03 : sata_uli > 0f80-0f87 : 0000:00:0e.1 > 0f80-0f87 : sata_uli > c000-cfff : PCI Bus #02 > cc00-cc1f : 0000:02:06.0 > cc00-cc1f : e100 > d880-d88f : 0000:00:0e.1 > d880-d88f : sata_uli > e400-e4ff : 0000:00:0d.0 > e400-e4ff : tulip > e800-e8ff : 0000:00:04.0 > e800-e8ff : ALi M5455 > ff00-ff0f : 0000:00:0e.0 > ff00-ff07 : ide0 > ff08-ff0f : ide1 >----- /proc/ioports end ----- >----- /proc/interrupts ----- > 0: 147258237 IO-APIC-edge timer > 1: 14 IO-APIC-edge i8042 > 4: 3303 IO-APIC-edge serial > 8: 0 IO-APIC-edge rtc > 9: 0 IO-APIC-level acpi > 14: 5290254 IO-APIC-edge ide0 > 169: 1074407 IO-APIC-level libata > 177: 26687796 IO-APIC-level ALi M5455, eth1 > 185: 0 IO-APIC-level ohci_hcd:usb1 > 193: 708 IO-APIC-level ohci_hcd:usb2 > 209: 0 IO-APIC-level ohci_hcd:usb3 > 217: 49 IO-APIC-level ehci_hcd:usb4 > NMI: 5172 > LOC: 147264564 > ERR: 0 > MIS: 0 >----- /proc/interrupts end ----- >----- /proc/dma ----- > 4: cascade >----- /proc/dma end ----- >>> misc.3: FPU >>> misc.3.1: DMA >>> misc.3.2: PIC >>> misc.3.3: timer >>> misc.3.4: RTC >>> cpu.1: cpuinfo >----- /proc/cpuinfo ----- > processor : 0 > vendor_id : AuthenticAMD > cpu family : 15 > model : 15 > model name : AMD Athlon(tm) 64 Processor 3500+ > stepping : 0 > cpu MHz : 999.988 > cache size : 512 KB > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow > bogomips : 2001.59 > TLB size : 1024 4K pages > clflush size : 64 > cache_alignment : 64 > address sizes : 40 bits physical, 48 bits virtual > power management: ts fid vid ttp > >----- /proc/cpuinfo end ----- >>> memory.1: main memory size > kcore mem: 0x1ffb0000 > klog mem 0: 0x0 > klog mem 1: 0x0 > klog mem: 0x0 > -- <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > -- <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > -- <4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) > -- <4> BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable) > -- <4> BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data) > -- <4> BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS) > -- <4> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) > -- <4> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) > -- <7>ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f98b0 > bios mem: 0x1ff4fc00 > meminfo: 0x1f0a8000 >>> pci.1: sysfs drivers >----- sysfs driver list (id 0xc3616f2494c5c588) ----- > ide-cdrom: /devices/pci0000:00/0000:00:0e.0/ide0/0.1 > ALI15x3_IDE: /devices/pci0000:00/0000:00:0e.0 > Intel ICH: /devices/pci0000:00/0000:00:04.0 > agpgart-amd64: /devices/pci0000:00/0000:00:00.0 > ali1563_i2c: /devices/pci0000:00/0000:00:03.0 > e100: /devices/pci0000:00/0000:00:02.0/0000:02:06.0 > ehci_hcd: /devices/pci0000:00/0000:00:0f.3 > ohci_hcd: /devices/pci0000:00/0000:00:0f.0 > ohci_hcd: /devices/pci0000:00/0000:00:0f.1 > ohci_hcd: /devices/pci0000:00/0000:00:0f.2 > sata_uli: /devices/pci0000:00/0000:00:0e.1 > tulip: /devices/pci0000:00/0000:00:0d.0 > i8042: /devices/platform/i8042 > serial8250: /devices/platform/serial8250 > vesafb: /devices/platform/vesafb.0 > sd: /devices/pci0000:00/0000:00:0e.1/host0/target0:0:0/0:0:0:0 > atkbd: /devices/platform/i8042/serio1 > generic: /module/usbserial > hiddev: /module/usbhid > hub: /devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0 > hub: /devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0 > hub: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0 > hub: /devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0 > hub: /devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0 > hub: /module/usbcore > usbfs: /module/usbcore > usbhid: /devices/pci0000:00/0000:00:0f.1/usb2/2-2/2-2:1.0 > usbhid: /module/usbhid > usblp: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3/2-1.3:1.0 > usblp: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4/2-1.4:1.0 > usblp: /module/usblp >usbserial_generic: /module/usbserial > usbserial: /module/usbserial > usb: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3 > usb: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4 > usb: /devices/pci0000:00/0000:00:0f.1/usb2/2-1 > usb: /devices/pci0000:00/0000:00:0f.1/usb2/2-2 > usb: /devices/pci0000:00/0000:00:0f.0/usb1 > usb: /devices/pci0000:00/0000:00:0f.1/usb2 > usb: /devices/pci0000:00/0000:00:0f.2/usb3 > usb: /devices/pci0000:00/0000:00:0f.3/usb4 > usb: /module/usbcore >----- sysfs driver list end ----- >>> pci.2: get sysfs pci data > pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci > path = /devices/pci0000:00/0000:00:00.0 > modalias = "pci:v000010B9d00001689sv00000000sd00000000bc06sc00i00 >" > class = 0x60000 > vendor = 0x10b9 > device = 0x1689 > subvendor = 0x0 > subdevice = 0x0 > irq = 0 > res[0] = 0xf8000000 0xfbffffff 0x1208 > config[64] > pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci > path = /devices/pci0000:00/0000:00:01.0 > modalias = "pci:v000010B9d00005246sv00000000sd00000000bc06sc04i00 >" > class = 0x60400 > vendor = 0x10b9 > device = 0x5246 > subvendor = 0x0 > subdevice = 0x0 > irq = 0 > config[64] > pci device: name = 0000:00:02.0, bus_id = 0000:00:02.0, bus = pci > path = /devices/pci0000:00/0000:00:02.0 > modalias = "pci:v000010B9d00005249sv00000000sd00000000bc06sc04i01 >" > class = 0x60401 > vendor = 0x10b9 > device = 0x5249 > subvendor = 0x0 > subdevice = 0x0 > irq = 0 > config[64] > pci device: name = 0000:00:03.0, bus_id = 0000:00:03.0, bus = pci > path = /devices/pci0000:00/0000:00:03.0 > modalias = "pci:v000010B9d00001563sv00001849sd00001563bc06sc01i00 >" > class = 0x60100 > vendor = 0x10b9 > device = 0x1563 > subvendor = 0x1849 > subdevice = 0x1563 > irq = 0 > config[64] > pci device: name = 0000:00:03.1, bus_id = 0000:00:03.1, bus = pci > path = /devices/pci0000:00/0000:00:03.1 > modalias = "pci:v000010B9d00007101sv00001849sd00007101bc06sc80i00 >" > class = 0x68000 > vendor = 0x10b9 > device = 0x7101 > subvendor = 0x1849 > subdevice = 0x7101 > irq = 0 > config[64] > pci device: name = 0000:00:04.0, bus_id = 0000:00:04.0, bus = pci > path = /devices/pci0000:00/0000:00:04.0 > modalias = "pci:v000010B9d00005455sv00001849sd00000850bc04sc01i00 >" > class = 0x40100 > vendor = 0x10b9 > device = 0x5455 > subvendor = 0x1849 > subdevice = 0x850 > irq = 177 > res[0] = 0xe800 0xe8ff 0x101 > res[1] = 0xfebff000 0xfebfffff 0x200 > config[64] > pci device: name = 0000:00:0d.0, bus_id = 0000:00:0d.0, bus = pci > path = /devices/pci0000:00/0000:00:0d.0 > modalias = "pci:v000010B9d00005263sv00001849sd00005263bc02sc00i00 >" > class = 0x20000 > vendor = 0x10b9 > device = 0x5263 > subvendor = 0x1849 > subdevice = 0x5263 > irq = 201 > res[0] = 0xe400 0xe4ff 0x101 > res[1] = 0xfebfec00 0xfebfecff 0x200 > config[64] > pci device: name = 0000:00:0e.0, bus_id = 0000:00:0e.0, bus = pci > path = /devices/pci0000:00/0000:00:0e.0 > modalias = "pci:v000010B9d00005229sv000010B9sd00005229bc01sc01ifa >" > class = 0x101fa > vendor = 0x10b9 > device = 0x5229 > subvendor = 0x10b9 > subdevice = 0x5229 > irq = 169 > res[4] = 0xff00 0xff0f 0x101 > config[64] > pci device: name = 0000:00:0e.1, bus_id = 0000:00:0e.1, bus = pci > path = /devices/pci0000:00/0000:00:0e.1 > modalias = "pci:v000010B9d00005289sv00001849sd00005289bc01sc80i8f >" > class = 0x1808f > vendor = 0x10b9 > device = 0x5289 > subvendor = 0x1849 > subdevice = 0x5289 > irq = 169 > res[0] = 0xf80 0xf87 0x101 > res[1] = 0xf00 0xf03 0x101 > res[2] = 0xe80 0xe87 0x101 > res[3] = 0xe00 0xe03 0x101 > res[4] = 0xd880 0xd88f 0x101 > config[64] > pci device: name = 0000:00:0f.0, bus_id = 0000:00:0f.0, bus = pci > path = /devices/pci0000:00/0000:00:0f.0 > modalias = "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10 >" > class = 0xc0310 > vendor = 0x10b9 > device = 0x5237 > subvendor = 0x1849 > subdevice = 0x5237 > irq = 185 > res[0] = 0xfebfd000 0xfebfdfff 0x200 > config[64] > pci device: name = 0000:00:0f.1, bus_id = 0000:00:0f.1, bus = pci > path = /devices/pci0000:00/0000:00:0f.1 > modalias = "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10 >" > class = 0xc0310 > vendor = 0x10b9 > device = 0x5237 > subvendor = 0x1849 > subdevice = 0x5237 > irq = 193 > res[0] = 0xfebfc000 0xfebfcfff 0x200 > config[64] > pci device: name = 0000:00:0f.2, bus_id = 0000:00:0f.2, bus = pci > path = /devices/pci0000:00/0000:00:0f.2 > modalias = "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10 >" > class = 0xc0310 > vendor = 0x10b9 > device = 0x5237 > subvendor = 0x1849 > subdevice = 0x5237 > irq = 209 > res[0] = 0xfebfb000 0xfebfbfff 0x200 > config[64] > pci device: name = 0000:00:0f.3, bus_id = 0000:00:0f.3, bus = pci > path = /devices/pci0000:00/0000:00:0f.3 > modalias = "pci:v000010B9d00005239sv00001849sd00005239bc0Csc03i20 >" > class = 0xc0320 > vendor = 0x10b9 > device = 0x5239 > subvendor = 0x1849 > subdevice = 0x5239 > irq = 217 > res[0] = 0xfebfe800 0xfebfe8ff 0x200 > config[64] > pci device: name = 0000:00:18.0, bus_id = 0000:00:18.0, bus = pci > path = /devices/pci0000:00/0000:00:18.0 > modalias = "pci:v00001022d00001100sv00000000sd00000000bc06sc00i00 >" > class = 0x60000 > vendor = 0x1022 > device = 0x1100 > subvendor = 0x0 > subdevice = 0x0 > irq = 0 > config[64] > pci device: name = 0000:00:18.1, bus_id = 0000:00:18.1, bus = pci > path = /devices/pci0000:00/0000:00:18.1 > modalias = "pci:v00001022d00001101sv00000000sd00000000bc06sc00i00 >" > class = 0x60000 > vendor = 0x1022 > device = 0x1101 > subvendor = 0x0 > subdevice = 0x0 > irq = 0 > config[64] > pci device: name = 0000:00:18.2, bus_id = 0000:00:18.2, bus = pci > path = /devices/pci0000:00/0000:00:18.2 > modalias = "pci:v00001022d00001102sv00000000sd00000000bc06sc00i00 >" > class = 0x60000 > vendor = 0x1022 > device = 0x1102 > subvendor = 0x0 > subdevice = 0x0 > irq = 0 > config[64] > pci device: name = 0000:00:18.3, bus_id = 0000:00:18.3, bus = pci > path = /devices/pci0000:00/0000:00:18.3 > modalias = "pci:v00001022d00001103sv00000000sd00000000bc06sc00i00 >" > class = 0x60000 > vendor = 0x1022 > device = 0x1103 > subvendor = 0x0 > subdevice = 0x0 > irq = 0 > config[64] > pci device: name = 0000:01:00.0, bus_id = 0000:01:00.0, bus = pci > path = /devices/pci0000:00/0000:00:01.0/0000:01:00.0 > modalias = "pci:v000010DEd0000002Dsv00001462sd00008808bc03sc00i00 >" > class = 0x30000 > vendor = 0x10de > device = 0x2d > subvendor = 0x1462 > subdevice = 0x8808 > irq = 10 > res[0] = 0xfd000000 0xfdffffff 0x200 > res[1] = 0xf2000000 0xf3ffffff 0x1208 > res[6] = 0xf0400000 0xf040ffff 0x7202 > config[64] > pci device: name = 0000:02:06.0, bus_id = 0000:02:06.0, bus = pci > path = /devices/pci0000:00/0000:00:02.0/0000:02:06.0 > modalias = "pci:v00008086d00001229sv00008086sd00000009bc02sc00i00 >" > class = 0x20000 > vendor = 0x8086 > device = 0x1229 > subvendor = 0x8086 > subdevice = 0x9 > irq = 177 > res[0] = 0xf44ff000 0xf44fffff 0x1208 > res[1] = 0xcc00 0xcc1f 0x101 > res[2] = 0xfea00000 0xfeafffff 0x200 > res[6] = 0xfe700000 0xfe7fffff 0x7200 > config[64] >---------- PCI raw data ---------- >bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 10b9:1689:0000:0000:00 >class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0 > addr0 f8000000, size 04000000 > 00: b9 10 89 16 06 01 10 00 00 00 00 06 00 00 00 00 "................" > 10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 "....@..........." > >bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 10b9:5246:0000:0000:00 >class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0 > 00: b9 10 46 52 07 01 20 00 00 00 04 06 00 00 01 00 "..FR.. ........." > 10: 00 00 00 00 00 00 00 00 00 01 01 40 f0 00 20 22 "...........@.. "" > 20: 60 fc 60 fe 40 f0 30 f4 00 00 00 00 00 00 00 00 "`.`.@.0........." > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0b 00 "................" > >bus 00->02, slot 02, func 0, vend:dev:s_vend:s_dev:rev 10b9:5249:0000:0000:00 >class 06, sub_class 04 prog_if 01, hdr 1, flags <>, irq 0 > 00: b9 10 49 52 07 01 00 00 00 01 04 06 00 00 01 00 "..IR............" > 10: 00 00 00 00 00 00 00 00 00 02 02 20 c0 c0 00 22 "........... ..."" > 20: 70 fe a0 fe 40 f4 40 f4 00 00 00 00 00 00 00 00 "p...@.@........." > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 "................" > >bus 00, slot 03, func 0, vend:dev:s_vend:s_dev:rev 10b9:1563:1849:1563:70 >class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0 > 00: b9 10 63 15 0f 00 00 02 70 00 01 06 00 00 80 00 "..c.....p......." > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 63 15 "............I.c." > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 18 "................" > >bus 00, slot 03, func 1, vend:dev:s_vend:s_dev:rev 10b9:7101:1849:7101:00 >class 06, sub_class 80 prog_if 00, hdr 0, flags <>, irq 0 > 00: b9 10 01 71 00 00 00 02 00 00 80 06 00 00 80 00 "...q............" > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 01 71 "............I..q" > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > >bus 00, slot 04, func 0, vend:dev:s_vend:s_dev:rev 10b9:5455:1849:0850:20 >class 04, sub_class 01 prog_if 00, hdr 0, flags <>, irq 177 > addr0 0000e800, size 00000100 > addr1 febff000, size 00001000 > 00: b9 10 55 54 17 00 10 02 20 00 01 04 10 20 00 00 "..UT.... .... .." > 10: 01 e8 00 00 00 f0 bf fe 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 50 08 "............I.P." > 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 40 00 "....@.........@." > >bus 00, slot 0d, func 0, vend:dev:s_vend:s_dev:rev 10b9:5263:1849:5263:40 >class 02, sub_class 00 prog_if 00, hdr 0, flags <>, irq 201 > addr0 0000e400, size 00000100 > addr1 febfec00, size 00000100 > 00: b9 10 63 52 07 01 10 02 40 00 00 02 08 20 00 00 "..cR....@.... .." > 10: 01 e4 00 00 00 ec bf fe 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 63 52 "............I.cR" > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 14 28 "....P..........(" > >bus 00, slot 0e, func 0, vend:dev:s_vend:s_dev:rev 10b9:5229:10b9:5229:c7 >class 01, sub_class 01 prog_if fa, hdr 0, flags <>, irq 169 > addr4 0000ff00, size 00000010 > 00: b9 10 29 52 05 00 a0 02 c7 fa 01 01 00 20 80 00 "..)R......... .." > 10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00 "........q...u..." > 20: 01 ff 00 00 00 00 00 00 00 00 00 00 b9 10 29 52 "..............)R" > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 "................" > >bus 00, slot 0e, func 1, vend:dev:s_vend:s_dev:rev 10b9:5289:1849:5289:10 >class 01, sub_class 80 prog_if 8f, hdr 0, flags <>, irq 169 > addr0 00000f80, size 00000008 > addr1 00000f00, size 00000004 > addr2 00000e80, size 00000008 > addr3 00000e00, size 00000004 > addr4 0000d880, size 00000010 > 00: b9 10 89 52 05 01 a0 02 10 8f 80 01 80 80 80 00 "...R............" > 10: 81 0f 00 00 01 0f 00 00 81 0e 00 00 01 0e 00 00 "................" > 20: 81 d8 00 00 00 00 00 00 00 00 00 00 49 18 89 52 "............I..R" > 30: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00 "................" > >bus 00, slot 0f, func 0, vend:dev:s_vend:s_dev:rev 10b9:5237:1849:5237:03 >class 0c, sub_class 03 prog_if 10, hdr 0, flags <>, irq 185 > addr0 febfd000, size 00001000 > 00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00 "..7R......... .." > 10: 00 d0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52 "............I.7R" > 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 50 "...............P" > >bus 00, slot 0f, func 1, vend:dev:s_vend:s_dev:rev 10b9:5237:1849:5237:03 >class 0c, sub_class 03 prog_if 10, hdr 0, flags <>, irq 193 > addr0 febfc000, size 00001000 > 00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00 "..7R......... .." > 10: 00 c0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52 "............I.7R" > 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 50 "...............P" > >bus 00, slot 0f, func 2, vend:dev:s_vend:s_dev:rev 10b9:5237:1849:5237:03 >class 0c, sub_class 03 prog_if 10, hdr 0, flags <>, irq 209 > addr0 febfb000, size 00001000 > 00: b9 10 37 52 17 01 a8 02 03 10 03 0c 10 20 80 00 "..7R......... .." > 10: 00 b0 bf fe 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 37 52 "............I.7R" > 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 50 "...............P" > >bus 00, slot 0f, func 3, vend:dev:s_vend:s_dev:rev 10b9:5239:1849:5239:01 >class 0c, sub_class 03 prog_if 20, hdr 0, flags <>, irq 217 > addr0 febfe800, size 00000100 > 00: b9 10 39 52 16 01 b0 02 01 20 03 0c 10 20 80 00 "..9R..... ... .." > 10: 00 e8 bf fe 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 39 52 "............I.9R" > 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 04 10 20 "....P.......... " > >bus 00, slot 18, func 0, vend:dev:s_vend:s_dev:rev 1022:1100:0000:0000:00 >class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0 > 00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 ""..............." > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 "................" > >bus 00, slot 18, func 1, vend:dev:s_vend:s_dev:rev 1022:1101:0000:0000:00 >class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0 > 00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00 ""..............." > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > >bus 00, slot 18, func 2, vend:dev:s_vend:s_dev:rev 1022:1102:0000:0000:00 >class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0 > 00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00 ""..............." > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > >bus 00, slot 18, func 3, vend:dev:s_vend:s_dev:rev 1022:1103:0000:0000:00 >class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0 > 00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00 ""..............." > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > >bus 01, slot 00, func 0, vend:dev:s_vend:s_dev:rev 10de:002d:1462:8808:15 >class 03, sub_class 00 prog_if 00, hdr 0, flags <>, irq 10 > addr0 fd000000, size 01000000 > addr1 f2000000, size 02000000 > 00: de 10 2d 00 07 00 b0 02 15 00 00 03 00 20 00 00 "..-.......... .." > 10: 00 00 00 fd 08 00 00 f2 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 62 14 08 88 "............b..." > 30: 00 00 6f fe 60 00 00 00 00 00 00 00 0a 01 05 01 "..o.`..........." > >bus 02, slot 06, func 0, vend:dev:s_vend:s_dev:rev 8086:1229:8086:0009:05 >class 02, sub_class 00 prog_if 00, hdr 0, flags <>, irq 177 > addr0 f44ff000, size 00001000 > addr1 0000cc00, size 00000020 > addr2 fea00000, size 00100000 > 00: 86 80 29 12 17 01 90 02 05 00 00 02 10 20 00 00 "..).......... .." > 10: 08 f0 4f f4 01 cc 00 00 00 00 a0 fe 00 00 00 00 "..O............." > 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 09 00 "................" > 30: 00 00 f0 ff dc 00 00 00 00 00 00 00 0b 01 08 38 "...............8" >---------- PCI raw data end ---------- >>> pci.4: build list >>> monitor.1: ddc >>> pcmcia.1: sysfs drivers >>> pcmcia.2: pcmcia >sysfs: no such bus: pcmcia >>> serial.1: read info >----- serial info ----- >----- serial info end ----- >>> serial.2: build list >>> misc.5: misc data >----- misc resources ----- >i/o:1 0x0000 - 0x001f (0x20) "dma1" >i/o:1 0x0020 - 0x0021 (0x02) "pic1" >i/o:0 0x0040 - 0x0043 (0x04) "timer0" >i/o:0 0x0050 - 0x0053 (0x04) "timer1" >i/o:1 0x0060 - 0x006f (0x10) "keyboard" >i/o:1 0x0070 - 0x0077 (0x08) "rtc" >i/o:1 0x0080 - 0x008f (0x10) "dma page reg" >i/o:1 0x00a0 - 0x00a1 (0x02) "pic2" >i/o:1 0x00c0 - 0x00df (0x20) "dma2" >i/o:1 0x00f0 - 0x00ff (0x10) "fpu" >i/o:1 0x01f0 - 0x01f7 (0x08) "ide0" >i/o:1 0x0378 - 0x037a (0x03) "parport0" >i/o:1 0x037b - 0x037f (0x05) "parport0" >i/o:1 0x03c0 - 0x03df (0x20) "vesafb" >i/o:1 0x03f6 - 0x03f6 (0x01) "ide0" >i/o:1 0x03f8 - 0x03ff (0x08) "serial" >i/o:0 0x0400 - 0x040f (0x10) "i2c-ali1563" >i/o:0 0x0800 - 0x083f (0x40) "0000:00:03.1" >i/o:0 0x0800 - 0x0803 (0x04) "PM1a_EVT_BLK" >i/o:0 0x0804 - 0x0805 (0x02) "PM1a_CNT_BLK" >i/o:0 0x0808 - 0x080b (0x04) "PM_TMR" >i/o:0 0x0810 - 0x0815 (0x06) "ACPI CPU throttle" >i/o:0 0x0818 - 0x0827 (0x10) "GPE0_BLK" >i/o:0 0x0830 - 0x0830 (0x01) "PM2_CNT_BLK" >i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1" >i/o:0 0x0e00 - 0x0e03 (0x04) "0000:00:0e.1" >i/o:0 0x0e00 - 0x0e03 (0x04) "sata_uli" >i/o:0 0x0e80 - 0x0e87 (0x08) "0000:00:0e.1" >i/o:0 0x0e80 - 0x0e87 (0x08) "sata_uli" >i/o:0 0x0f00 - 0x0f03 (0x04) "0000:00:0e.1" >i/o:0 0x0f00 - 0x0f03 (0x04) "sata_uli" >i/o:0 0x0f80 - 0x0f87 (0x08) "0000:00:0e.1" >i/o:0 0x0f80 - 0x0f87 (0x08) "sata_uli" >i/o:0 0xc000 - 0xcfff (0x1000) "PCI Bus #02" >i/o:0 0xcc00 - 0xcc1f (0x20) "0000:02:06.0" >i/o:0 0xcc00 - 0xcc1f (0x20) "e100" >i/o:0 0xd880 - 0xd88f (0x10) "0000:00:0e.1" >i/o:0 0xd880 - 0xd88f (0x10) "sata_uli" >i/o:0 0xe400 - 0xe4ff (0x100) "0000:00:0d.0" >i/o:0 0xe400 - 0xe4ff (0x100) "tulip" >i/o:0 0xe800 - 0xe8ff (0x100) "0000:00:04.0" >i/o:0 0xe800 - 0xe8ff (0x100) "ALi M5455" >i/o:0 0xff00 - 0xff0f (0x10) "0000:00:0e.0" >i/o:1 0xff00 - 0xff07 (0x08) "ide0" >i/o:1 0xff08 - 0xff0f (0x08) "ide1" >irq:1 0 (147258237) "timer" >irq:0 1 ( 14) "i8042" >irq:1 4 ( 3303) "serial" >irq:1 8 ( 0) "rtc" >irq:0 9 ( 0) "acpi" >irq:1 14 ( 5290254) "ide0" >irq:0 169 ( 1074407) "libata" >irq:0 177 ( 26687796) "ALi M5455" "eth1" >irq:0 185 ( 0) "ohci_hcd:usb1" >irq:0 193 ( 708) "ohci_hcd:usb2" >irq:0 209 ( 0) "ohci_hcd:usb3" >irq:0 217 ( 49) "ehci_hcd:usb4" >dma:1 4 "cascade" >----- misc resources end ----- >>> parallel.1: pp mod >----- exec: "/sbin/rmmod lp" ----- > ERROR: Removing 'lp': Operation not permitted >----- return code: ? ----- >----- exec: "/sbin/rmmod parport_pc" ----- > ERROR: Module parport_pc is in use >----- return code: ? ----- >>> parallel.2.1: lp read info >>> parallel.2.2: lp read info >>> parallel.2.3: lp read info >----- parallel info ----- >/proc/sys/dev/parport/parport0/base-addr > 888 1912 >/proc/sys/dev/parport/parport0/autoprobe >----- parallel info end ----- >>> parallel.5: ppa mod >----- exec: "/sbin/modprobe ppa " ----- > FATAL: Error inserting ppa (/lib/modules/2.6.13-3-default/kernel/drivers/scsi/ppa.ko): Operation not permitted >----- return code: ? ----- >>> block.1: block modules >----- exec: "/sbin/modprobe sr_mod " ----- > FATAL: Error inserting sr_mod (/lib/modules/2.6.13-3-default/kernel/drivers/scsi/sr_mod.ko): Operation not permitted >----- return code: ? ----- >----- exec: "/sbin/modprobe st " ----- > FATAL: Error inserting st (/lib/modules/2.6.13-3-default/kernel/drivers/scsi/st.ko): Operation not permitted >----- return code: ? ----- >>> block.2: sysfs drivers >>> block.3: cdrom >----- /proc/sys/dev/cdrom/info ----- >drive name: hdb >drive speed: 48 >drive # of slots: 1 >Can close tray: 1 >Can open tray: 1 >Can lock tray: 1 >Can change speed: 1 >Can select disk: 0 >Can read multisession: 1 >Can read MCN: 1 >Reports media changed: 1 >Can play audio: 1 >Can write CD-R: 0 >Can write CD-RW: 0 >Can read DVD: 1 >Can write DVD-R: 0 >Can write DVD-RAM: 0 >Can read MRW: 1 >Can write MRW: 1 >Can write RAM: 1 >----- /proc/sys/dev/cdrom/info end ----- >>> block.4: partition >----- /proc/partitions ----- > 8 0 80418240 sda > 8 1 1052226 sda1 > 8 2 5245222 sda2 > 8 3 74107845 sda3 >----- /proc/partitions end ----- >disks: > sda >partitions: > sda1 > sda2 > sda3 >>> block.5: get sysfs block dev data > ide: bus_id = 0.1 path = /devices/pci0000:00/0000:00:0e.0/ide0/0.1 > block: name = fd0, path = /block/fd0 > dev = 2:0 > range = 1 > block device: bus = platform, bus_id = floppy.0 driver = unknown > path = /devices/platform/floppy.0 > block: name = hdb, path = /block/hdb > dev = 3:64 > range = 1 > block device: bus = ide, bus_id = 0.1 driver = ide-cdrom > path = /devices/pci0000:00/0000:00:0e.0/ide0/0.1 > block: name = loop0, path = /block/loop0 > dev = 7:0 > range = 1 > block: name = loop1, path = /block/loop1 > dev = 7:1 > range = 1 > block: name = loop2, path = /block/loop2 > dev = 7:2 > range = 1 > block: name = loop3, path = /block/loop3 > dev = 7:3 > range = 1 > block: name = loop4, path = /block/loop4 > dev = 7:4 > range = 1 > block: name = loop5, path = /block/loop5 > dev = 7:5 > range = 1 > block: name = loop6, path = /block/loop6 > dev = 7:6 > range = 1 > block: name = loop7, path = /block/loop7 > dev = 7:7 > range = 1 > block: name = md0, path = /block/md0 > dev = 9:0 > range = 1 > block: name = ram0, path = /block/ram0 > dev = 1:0 > range = 1 > block: name = ram10, path = /block/ram10 > dev = 1:10 > range = 1 > block: name = ram11, path = /block/ram11 > dev = 1:11 > range = 1 > block: name = ram12, path = /block/ram12 > dev = 1:12 > range = 1 > block: name = ram13, path = /block/ram13 > dev = 1:13 > range = 1 > block: name = ram14, path = /block/ram14 > dev = 1:14 > range = 1 > block: name = ram15, path = /block/ram15 > dev = 1:15 > range = 1 > block: name = ram1, path = /block/ram1 > dev = 1:1 > range = 1 > block: name = ram2, path = /block/ram2 > dev = 1:2 > range = 1 > block: name = ram3, path = /block/ram3 > dev = 1:3 > range = 1 > block: name = ram4, path = /block/ram4 > dev = 1:4 > range = 1 > block: name = ram5, path = /block/ram5 > dev = 1:5 > range = 1 > block: name = ram6, path = /block/ram6 > dev = 1:6 > range = 1 > block: name = ram7, path = /block/ram7 > dev = 1:7 > range = 1 > block: name = ram8, path = /block/ram8 > dev = 1:8 > range = 1 > block: name = ram9, path = /block/ram9 > dev = 1:9 > range = 1 > block: name = sda, path = /block/sda > dev = 8:0 > range = 16 > block device: bus = scsi, bus_id = 0:0:0:0 driver = sd > path = /devices/pci0000:00/0000:00:0e.1/host0/target0:0:0/0:0:0:0 > vendor = ATA > model = HDS722580VLSA80 > rev = V32O > type = 0 >>> block.5: /dev/sda >>> scsi.1: scsi modules >>> scsi.2: scsi tape >sysfs: no such class: scsi_tape >>> scsi.3: scsi generic > scsi: name = sg0, path = /class/scsi_generic/sg0 > dev = 21:0 > scsi device: bus = scsi, bus_id = 0:0:0:0 driver = sd > path = /devices/pci0000:00/0000:00:0e.1/host0/target0:0:0/0:0:0:0 >>> usb.1: sysfs drivers >>> usb.2: usb > usb dev: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3 > usb dev: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4 > usb dev: /devices/pci0000:00/0000:00:0f.1/usb2/2-1 > usb dev: /devices/pci0000:00/0000:00:0f.1/usb2/2-2 > usb dev: /devices/pci0000:00/0000:00:0f.0/usb1 > usb dev: /devices/pci0000:00/0000:00:0f.1/usb2 > usb dev: /devices/pci0000:00/0000:00:0f.2/usb3 > usb dev: /devices/pci0000:00/0000:00:0f.3/usb4 > usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb > path = /devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0 > modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*" > bInterfaceNumber = 0 > bInterfaceClass = 9 > bInterfaceSubClass = 0 > bInterfaceProtocol = 0 > if: 1-0:1.0 @ /devices/pci0000:00/0000:00:0f.0/usb1 > bDeviceClass = 9 > bDeviceSubClass = 0 > bDeviceProtocol = 0 > idVendor = 0x0000 > idProduct = 0x0000 > manufacturer = "Linux 2.6.13-3-default ohci_hcd" > product = "OHCI Host Controller" > serial = "0000:00:0f.0" > bcdDevice = 0206 > speed = "12" > usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0 > modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*" > bInterfaceNumber = 0 > bInterfaceClass = 9 > bInterfaceSubClass = 0 > bInterfaceProtocol = 0 > if: 2-0:1.0 @ /devices/pci0000:00/0000:00:0f.1/usb2 > bDeviceClass = 9 > bDeviceSubClass = 0 > bDeviceProtocol = 0 > idVendor = 0x0000 > idProduct = 0x0000 > manufacturer = "Linux 2.6.13-3-default ohci_hcd" > product = "OHCI Host Controller" > serial = "0000:00:0f.1" > bcdDevice = 0206 > speed = "12" > usb device: name = 2-1.3:1.0, bus_id = 2-1.3:1.0, bus = usb > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3/2-1.3:1.0 > modalias = "usb:v04B8p0005d0100dc00dsc00dp00ic07isc01ip02" > bInterfaceNumber = 0 > bInterfaceClass = 7 > bInterfaceSubClass = 1 > bInterfaceProtocol = 2 > if: 2-1.3:1.0 @ /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3 > bDeviceClass = 0 > bDeviceSubClass = 0 > bDeviceProtocol = 0 > idVendor = 0x04b8 > idProduct = 0x0005 > manufacturer = "EPSON" > product = "USB Printer" > serial = "L84NO0009270827130" > bcdDevice = 0100 > speed = "12" > usb device: name = 2-1.3, bus_id = 2-1.3, bus = usb > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3 > usb device: name = 2-1.4:1.0, bus_id = 2-1.4:1.0, bus = usb > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4/2-1.4:1.0 > modalias = "usb:v04B8p0005d0100dc00dsc00dp00ic07isc01ip02" > bInterfaceNumber = 0 > bInterfaceClass = 7 > bInterfaceSubClass = 1 > bInterfaceProtocol = 2 > if: 2-1.4:1.0 @ /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4 > bDeviceClass = 0 > bDeviceSubClass = 0 > bDeviceProtocol = 0 > idVendor = 0x04b8 > idProduct = 0x0005 > manufacturer = "EPSON" > product = "USB Printer" > serial = "HU22Y0410250635140" > bcdDevice = 0100 > speed = "12" > usb device: name = 2-1.4, bus_id = 2-1.4, bus = usb > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4 > usb device: name = 2-1:1.0, bus_id = 2-1:1.0, bus = usb > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0 > modalias = "usb:v0451p1446d0110dc09dsc00dp00ic*isc*ip*" > bInterfaceNumber = 0 > bInterfaceClass = 9 > bInterfaceSubClass = 0 > bInterfaceProtocol = 0 > if: 2-1:1.0 @ /devices/pci0000:00/0000:00:0f.1/usb2/2-1 > bDeviceClass = 9 > bDeviceSubClass = 0 > bDeviceProtocol = 0 > idVendor = 0x0451 > idProduct = 0x1446 > bcdDevice = 0110 > speed = "12" > usb device: name = 2-1, bus_id = 2-1, bus = usb > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1 > usb device: name = 2-2:1.0, bus_id = 2-2:1.0, bus = usb > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-2/2-2:1.0 > modalias = "usb:v1241p1111d0100dc00dsc00dp00ic03isc01ip02" > bInterfaceNumber = 0 > bInterfaceClass = 3 > bInterfaceSubClass = 1 > bInterfaceProtocol = 2 > if: 2-2:1.0 @ /devices/pci0000:00/0000:00:0f.1/usb2/2-2 > bDeviceClass = 0 > bDeviceSubClass = 0 > bDeviceProtocol = 0 > idVendor = 0x1241 > idProduct = 0x1111 > bcdDevice = 0100 > speed = "1.5" > usb device: name = 2-2, bus_id = 2-2, bus = usb > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-2 > usb device: name = 3-0:1.0, bus_id = 3-0:1.0, bus = usb > path = /devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0 > modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*" > bInterfaceNumber = 0 > bInterfaceClass = 9 > bInterfaceSubClass = 0 > bInterfaceProtocol = 0 > if: 3-0:1.0 @ /devices/pci0000:00/0000:00:0f.2/usb3 > bDeviceClass = 9 > bDeviceSubClass = 0 > bDeviceProtocol = 0 > idVendor = 0x0000 > idProduct = 0x0000 > manufacturer = "Linux 2.6.13-3-default ohci_hcd" > product = "OHCI Host Controller" > serial = "0000:00:0f.2" > bcdDevice = 0206 > speed = "12" > usb device: name = 4-0:1.0, bus_id = 4-0:1.0, bus = usb > path = /devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0 > modalias = "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*" > bInterfaceNumber = 0 > bInterfaceClass = 9 > bInterfaceSubClass = 0 > bInterfaceProtocol = 0 > if: 4-0:1.0 @ /devices/pci0000:00/0000:00:0f.3/usb4 > bDeviceClass = 9 > bDeviceSubClass = 0 > bDeviceProtocol = 1 > idVendor = 0x0000 > idProduct = 0x0000 > manufacturer = "Linux 2.6.13-3-default ehci_hcd" > product = "EHCI Host Controller" > serial = "0000:00:0f.3" > bcdDevice = 0206 > speed = "480" > usb device: name = usb1, bus_id = usb1, bus = usb > path = /devices/pci0000:00/0000:00:0f.0/usb1 > usb device: name = usb2, bus_id = usb2, bus = usb > path = /devices/pci0000:00/0000:00:0f.1/usb2 > usb device: name = usb3, bus_id = usb3, bus = usb > path = /devices/pci0000:00/0000:00:0f.2/usb3 > usb device: name = usb4, bus_id = usb4, bus = usb > path = /devices/pci0000:00/0000:00:0f.3/usb4 >>> usb.3.1: joydev mod >----- exec: "/sbin/modprobe joydev " ----- > FATAL: Error inserting joydev (/lib/modules/2.6.13-3-default/kernel/drivers/input/joydev.ko): Operation not permitted >----- return code: ? ----- >>> usb.3.2: evdev mod >----- exec: "/sbin/modprobe evdev " ----- > FATAL: Module evdev not found. >----- return code: ? ----- >>> usb.3.3: input > input: name = event0, path = /class/input/event0 > dev = 13:64 > input: name = event1, path = /class/input/event1 > dev = 13:65 > input device: bus = serio, bus_id = serio1 driver = atkbd > path = /devices/platform/i8042/serio1 > input: name = event2, path = /class/input/event2 > dev = 13:66 > input device: bus = usb, bus_id = 2-2:1.0 driver = usbhid > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-2/2-2:1.0 > input: name = mice, path = /class/input/mice > dev = 13:63 > input: name = mouse0, path = /class/input/mouse0 > dev = 13:32 > input device: bus = usb, bus_id = 2-2:1.0 driver = usbhid > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-2/2-2:1.0 >>> usb.3.4: lp > usb: name = lp0, path = /class/usb/lp0 > dev = 180:0 > usb device: bus = usb, bus_id = 2-1.3:1.0 driver = usblp > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3/2-1.3:1.0 > usb: name = lp1, path = /class/usb/lp1 > dev = 180:1 > usb device: bus = usb, bus_id = 2-1.4:1.0 driver = usblp > path = /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4/2-1.4:1.0 >>> usb.3.5: serial >>> edd.1: edd mod >>> edd.2: edd info >edd: 0x80 > size: 160836478 > chs default: 10011/255/63 > chs legacy: 1024/255/63 > caps: fixed > attached: #0 >>> modem.1: serial >****** started child process 717 (15s/120s) ****** >****** stopped child process 717 (120s) ****** >>> mouse.2: serial >****** started child process 718 (20s/20s) ****** >****** stopped child process 718 (20s) ****** >>> input.1: joydev mod >----- exec: "/sbin/modprobe joydev " ----- > FATAL: Error inserting joydev (/lib/modules/2.6.13-3-default/kernel/drivers/input/joydev.ko): Operation not permitted >----- return code: ? ----- >>> input.1.1: evdev mod >----- exec: "/sbin/modprobe evdev " ----- > FATAL: Module evdev not found. >----- return code: ? ----- >>> input.2: input >----- /proc/bus/input/devices ----- > I: Bus=0010 Vendor=001f Product=0001 Version=0100 > N: Name="PC Speaker" > P: Phys=isa0061/input0 > H: Handlers=kbd event0 > B: EV=40001 > B: SND=6 > > I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 > N: Name="AT Translated Set 2 keyboard" > P: Phys=isa0060/serio0/input0 > H: Handlers=kbd event1 > B: EV=120013 > B: KEY=402000000 3802078f840d001 f2ffffdfffefffff fffffffffffffffe > B: MSC=10 > B: LED=7 > > I: Bus=0003 Vendor=1241 Product=1111 Version=0100 > N: Name="1241:1111" > P: Phys=usb-0000:00:0f.1-2/input0 > H: Handlers=mouse0 event2 > B: EV=7 > B: KEY=70000 0 0 0 0 > B: REL=103 > >----- /proc/bus/input/devices end ----- >bus = 16, name = PC Speaker > handlers = kbd event0 > mouse buttons = 0 > mouse wheels = 0 >bus = 17, name = AT Translated Set 2 keyboard > handlers = kbd event1 > key = 000000040200000003802078f840d001f2ffffdfffeffffffffffffffffffffe > mouse buttons = 0 > mouse wheels = 0 >bus = 3, name = 1241:1111 > handlers = mouse0 event2 > key = 00000000000700000000000000000000000000000000000000000000000000000000000000000000 > rel = 0000000000000103 > mouse buttons = 3 > mouse wheels = 1 >>> kbd.2: uml >>> cpu.1: cpuinfo >----- /proc/cpuinfo ----- > processor : 0 > vendor_id : AuthenticAMD > cpu family : 15 > model : 15 > model name : AMD Athlon(tm) 64 Processor 3500+ > stepping : 0 > cpu MHz : 999.988 > cache size : 512 KB > fpu : yes > fpu_exception : yes > cpuid level : 1 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext lm 3dnowext 3dnow > bogomips : 2001.59 > TLB size : 1024 4K pages > clflush size : 64 > cache_alignment : 64 > address sizes : 40 bits physical, 48 bits virtual > power management: ts fid vid ttp > >----- /proc/cpuinfo end ----- >>> kbd.3: serial console >>> fb.1: read info >>> net.1: get network data > net interface: name = eth0, classname = net, path = /class/net/eth0 > type = 1 > hw_addr = 00:0b:6a:7b:ad:7b > net device: path = /devices/pci0000:00/0000:00:0d.0 > GDRVINFO ethtool error: Operation not permitted > net interface: name = eth1, classname = net, path = /class/net/eth1 > type = 1 > hw_addr = 00:90:27:4f:7c:df > net device: path = /devices/pci0000:00/0000:00:02.0/0000:02:06.0 > GDRVINFO ethtool error: Operation not permitted > net interface: name = lo, classname = net, path = /class/net/lo > type = 772 > hw_addr = 00:00:00:00:00:00 > net interface: name = sit0, classname = net, path = /class/net/sit0 > type = 776 > hw_addr = 00:00:00:00 > eth0: GLINK ethtool error: Operation not permitted > eth1: GLINK ethtool error: Operation not permitted > lo: GLINK ethtool error: Operation not permitted > sit0: GLINK ethtool error: Operation not permitted >>> pppoe.1: looking for pppoe >>> pppoe.2: discovery >eth0: socket failed: Operation not permitted >eth1: socket failed: Operation not permitted >>> 38.1: detecting wlan features >>> 38.2: assign udi >>> isdn.1: list >>> dsl.1: list >>> int.2: cdrom >>> int.3: media >>> int.4.1: /dev/sda > read_block0: open(/dev/sda) failed >>> int.4: floppy >>> int.5: bios > bios ctrl 0: 22 >>> int.6: mouse >>> int.15: system info > system type: > acpi: 1 >>> int.7: hdb >>> int.8: usbscsi >>> int.9: hotplug >>> int.10: modem >>> int.11: wlan >>> int.12: udev >----- udevinfo ----- > P:/class/usb_device/usbdev2.3 > N:usbdev2.3 > S:bus/usb/2/3 > M:189:130 > P:/class/usb_device/usbdev2.10 > N:usbdev2.10 > S:bus/usb/2/10 > M:189:137 > P:/class/usb_device/usbdev2.11 > N:usbdev2.11 > S:bus/usb/2/11 > M:189:138 > P:/class/usb_device/usbdev3.3 > N:usbdev3.3 > S:bus/usb/3/3 > M:189:258 > P:/class/usb_device/usbdev3.6 > N:usbdev3.6 > S:bus/usb/3/6 > M:189:261 > P:/class/usb_device/usbdev3.5 > N:usbdev3.5 > S:bus/usb/3/5 > M:189:260 > P:/class/usb_device/usbdev3.2 > N:usbdev3.2 > S:bus/usb/3/2 > M:189:257 > P:/class/sound/controlC0 > N:snd/controlC0 > M:116:0 > P:/class/sound/pcmC0D0c > N:snd/pcmC0D0c > M:116:24 > P:/class/sound/pcmC0D0p > N:snd/pcmC0D0p > M:116:16 > P:/class/sound/pcmC0D1c > N:snd/pcmC0D1c > M:116:25 > P:/class/sound/pcmC0D2c > N:snd/pcmC0D2c > M:116:26 > P:/class/sound/pcmC0D2p > N:snd/pcmC0D2p > M:116:18 > P:/class/sound/timer > N:snd/timer > M:116:33 > P:/class/input/event2 > N:input/event2 > M:13:66 > P:/class/input/mouse0 > N:input/mouse0 > M:13:32 > P:/class/usb_device/usbdev2.12 > N:usbdev2.12 > S:bus/usb/2/12 > M:189:139 > P:/class/usb/lp1 > N:usb/lp1 > S:usblp1 > M:180:1 > P:/class/usb_device/usbdev2.5 > N:usbdev2.5 > S:bus/usb/2/5 > M:189:132 > P:/block/sda/sda1 > N:sda1 > S:disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part1 > S:disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part1 > M:8:1 > E:ID_VENDOR=ATA > E:ID_MODEL=HDS722580VLSA80 > E:ID_REVISION=V32O > E:ID_SERIAL=SATA_HDS722580VLSA80_VN6BHECBDYJ8YD > E:ID_TYPE=disk > E:ID_BUS=scsi > E:ID_PATH=pci-0000:00:0e.1-scsi-0:0:0:0 > E:ID_FS_USAGE=other > E:ID_FS_TYPE=swap > E:ID_FS_VERSION=2 > E:ID_FS_UUID= > E:ID_FS_LABEL= > E:ID_FS_LABEL_SAFE= > P:/block/sda/sda3 > N:sda3 > S:disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part3 > S:disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part3 > S:disk/by-uuid/4e557ca8-6263-4b1f-96fb-73bb416727c0 > M:8:3 > E:ID_VENDOR=ATA > E:ID_MODEL=HDS722580VLSA80 > E:ID_REVISION=V32O > E:ID_SERIAL=SATA_HDS722580VLSA80_VN6BHECBDYJ8YD > E:ID_TYPE=disk > E:ID_BUS=scsi > E:ID_PATH=pci-0000:00:0e.1-scsi-0:0:0:0 > E:ID_FS_USAGE=filesystem > E:ID_FS_TYPE=ext3 > E:ID_FS_VERSION= > E:ID_FS_UUID=4e557ca8-6263-4b1f-96fb-73bb416727c0 > E:ID_FS_LABEL= > E:ID_FS_LABEL_SAFE= > P:/block/hdb > N:hdb > S:dvd > S:cdrom > S:disk/by-path/pci-0000:00:0e.0-ide-0:1 > M:3:64 > E:ID_TYPE=cd > E:ID_MODEL=LITE-ON_DVD_SOHD-167T > E:ID_SERIAL= > E:ID_REVISION=9S15 > E:ID_BUS=ata > E:ID_PATH=pci-0000:00:0e.0-ide-0:1 > P:/class/usb/lp0 > N:usb/lp0 > S:usblp0 > M:180:0 > P:/block/sda/sda2 > N:sda2 > S:disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part2 > S:disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part2 > S:disk/by-uuid/70176bdf-56db-4a78-8ece-5b88b8a48a5d > M:8:2 > E:ID_VENDOR=ATA > E:ID_MODEL=HDS722580VLSA80 > E:ID_REVISION=V32O > E:ID_SERIAL=SATA_HDS722580VLSA80_VN6BHECBDYJ8YD > E:ID_TYPE=disk > E:ID_BUS=scsi > E:ID_PATH=pci-0000:00:0e.1-scsi-0:0:0:0 > E:ID_FS_USAGE=filesystem > E:ID_FS_TYPE=ext3 > E:ID_FS_VERSION= > E:ID_FS_UUID=70176bdf-56db-4a78-8ece-5b88b8a48a5d > E:ID_FS_LABEL= > E:ID_FS_LABEL_SAFE= > P:/class/usb_device/usbdev4.1 > N:usbdev4.1 > S:bus/usb/4/1 > M:189:384 > P:/class/usb_device/usbdev1.1 > N:usbdev1.1 > S:bus/usb/1/1 > M:189:0 > P:/block/sda > N:sda > S:disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD > S:disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0 > M:8:0 > E:ID_VENDOR=ATA > E:ID_MODEL=HDS722580VLSA80 > E:ID_REVISION=V32O > E:ID_SERIAL=SATA_HDS722580VLSA80_VN6BHECBDYJ8YD > E:ID_TYPE=disk > E:ID_BUS=scsi > E:ID_PATH=pci-0000:00:0e.1-scsi-0:0:0:0 > P:/class/usb_device/usbdev3.1 > N:usbdev3.1 > S:bus/usb/3/1 > M:189:256 > P:/class/usb_device/usbdev2.1 > N:usbdev2.1 > S:bus/usb/2/1 > M:189:128 > P:/class/input/event1 > N:input/event1 > M:13:65 > P:/class/input/event0 > N:input/event0 > M:13:64 > P:/class/input/mice > N:input/mice > M:13:63 >----- udevinfo end ----- >/class/usb_device/usbdev2.3 > name: usbdev2.3 > links: bus/usb/2/3 >/class/usb_device/usbdev2.10 > name: usbdev2.10 > links: bus/usb/2/10 >/class/usb_device/usbdev2.11 > name: usbdev2.11 > links: bus/usb/2/11 >/class/usb_device/usbdev3.3 > name: usbdev3.3 > links: bus/usb/3/3 >/class/usb_device/usbdev3.6 > name: usbdev3.6 > links: bus/usb/3/6 >/class/usb_device/usbdev3.5 > name: usbdev3.5 > links: bus/usb/3/5 >/class/usb_device/usbdev3.2 > name: usbdev3.2 > links: bus/usb/3/2 >/class/sound/controlC0 > name: snd/controlC0 >/class/sound/pcmC0D0c > name: snd/pcmC0D0c >/class/sound/pcmC0D0p > name: snd/pcmC0D0p >/class/sound/pcmC0D1c > name: snd/pcmC0D1c >/class/sound/pcmC0D2c > name: snd/pcmC0D2c >/class/sound/pcmC0D2p > name: snd/pcmC0D2p >/class/sound/timer > name: snd/timer >/class/input/event2 > name: input/event2 >/class/input/mouse0 > name: input/mouse0 >/class/usb_device/usbdev2.12 > name: usbdev2.12 > links: bus/usb/2/12 >/class/usb/lp1 > name: usb/lp1 > links: usblp1 >/class/usb_device/usbdev2.5 > name: usbdev2.5 > links: bus/usb/2/5 >/block/sda/sda1 > name: sda1 > links: disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part1, disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part1 >/block/sda/sda3 > name: sda3 > links: disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part3, disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part3, disk/by-uuid/4e557ca8-6263-4b1f-96fb-73bb416727c0 >/block/hdb > name: hdb > links: dvd, cdrom, disk/by-path/pci-0000:00:0e.0-ide-0:1 >/class/usb/lp0 > name: usb/lp0 > links: usblp0 >/block/sda/sda2 > name: sda2 > links: disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part2, disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part2, disk/by-uuid/70176bdf-56db-4a78-8ece-5b88b8a48a5d >/class/usb_device/usbdev4.1 > name: usbdev4.1 > links: bus/usb/4/1 >/class/usb_device/usbdev1.1 > name: usbdev1.1 > links: bus/usb/1/1 >/block/sda > name: sda > links: disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD, disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0 >/class/usb_device/usbdev3.1 > name: usbdev3.1 > links: bus/usb/3/1 >/class/usb_device/usbdev2.1 > name: usbdev2.1 > links: bus/usb/2/1 >/class/input/event1 > name: input/event1 >/class/input/event0 > name: input/event0 >/class/input/mice > name: input/mice >>> int.13: device names >>> int.14: soft raid >----- soft raid devices ----- >----- soft raid devices end ----- >>> int.15: geo >>> int.16: parent > prop read: rdCR.3wRL2_g4d2B (failed) > old prop read: rdCR.3wRL2_g4d2B (failed) > prop read: /org/freedesktop/Hal/devices/computer_storage (failed) > prop read: sPPV.oZ89vuho4Y3 (failed) > old prop read: sPPV.oZ89vuho4Y3 (failed) > prop read: rdCR.lZF+r4EgHp4 (failed) > old prop read: rdCR.lZF+r4EgHp4 (failed) > prop read: rdCR.n_7QNeEnh23 (failed) > old prop read: rdCR.n_7QNeEnh23 (failed) > prop read: rdCR.EMpH5pjcahD (failed) > old prop read: rdCR.EMpH5pjcahD (failed) > prop read: rdCR.f5u1ucRm+H9 (failed) > old prop read: rdCR.f5u1ucRm+H9 (failed) > prop read: rdCR.8uRK7LxiIA2 (failed) > old prop read: rdCR.8uRK7LxiIA2 (failed) > prop read: rdCR.AJKleuxpiP0 (failed) > old prop read: rdCR.AJKleuxpiP0 (failed) > prop read: rdCR.hWmSPAStPX7 (failed) > old prop read: rdCR.hWmSPAStPX7 (failed) > prop read: rdCR.9N+EecqykME (failed) > old prop read: rdCR.9N+EecqykME (failed) > prop read: YMnp.ecK7NLYWZ5D (failed) > old prop read: YMnp.ecK7NLYWZ5D (failed) > prop read: rdCR.CxwsZFjVASF (failed) > old prop read: rdCR.CxwsZFjVASF (failed) > prop read: /org/freedesktop/Hal/devices/pci_10b9_1689 (failed) > prop read: qLht.05BmTiV0RY9 (failed) > old prop read: qLht.05BmTiV0RY9 (failed) > prop read: /org/freedesktop/Hal/devices/pci_10b9_5246 (failed) > prop read: vSkL.zGxv3_xDdlC (failed) > old prop read: vSkL.zGxv3_xDdlC (failed) > prop read: /org/freedesktop/Hal/devices/pci_10b9_5249 (failed) > prop read: _Znp.Xi7km9jxxp1 (failed) > old prop read: _Znp.Xi7km9jxxp1 (failed) > prop read: /org/freedesktop/Hal/devices/pci_10b9_1563 (failed) > prop read: 3hqH.5rwKtZcxSz9 (failed) > old prop read: 3hqH.5rwKtZcxSz9 (failed) > prop read: /org/freedesktop/Hal/devices/pci_10b9_7101 (failed) > prop read: w+J7.egvSauENMU7 (failed) > old prop read: w+J7.egvSauENMU7 (failed) > prop read: /org/freedesktop/Hal/devices/pci_10b9_5455 (failed) > prop read: 8otl.qAIzqAgBao4 (ok) > prop read: /org/freedesktop/Hal/devices/pci_10b9_5263 (failed) > prop read: rBUF.wnomy9rZnZ9 (ok) > prop read: /org/freedesktop/Hal/devices/pci_10b9_5229 (failed) > prop read: vuMS.luyn6jFx3jC (failed) > old prop read: vuMS.luyn6jFx3jC (failed) > prop read: /org/freedesktop/Hal/devices/pci_10b9_5289 (failed) > prop read: mDsH.a+poeoZUR54 (failed) > old prop read: mDsH.a+poeoZUR54 (failed) > prop read: /org/freedesktop/Hal/devices/pci_10b9_5237_1 (failed) > prop read: _+Pw.2qM5X9cC8j9 (failed) > old prop read: _+Pw.2qM5X9cC8j9 (failed) > prop read: /org/freedesktop/Hal/devices/pci_10b9_5237_0 (failed) > prop read: rKvl.2qM5X9cC8j9 (failed) > old prop read: rKvl.2qM5X9cC8j9 (failed) > prop read: /org/freedesktop/Hal/devices/pci_10b9_5237 (failed) > prop read: ifOb.2qM5X9cC8j9 (failed) > old prop read: ifOb.2qM5X9cC8j9 (failed) > prop read: /org/freedesktop/Hal/devices/pci_10b9_5239 (failed) > prop read: a_tQ.KFUNkdo9MlF (failed) > old prop read: a_tQ.KFUNkdo9MlF (failed) > prop read: /org/freedesktop/Hal/devices/pci_1022_1100 (failed) > prop read: fiDB.ptk_g9XAN03 (failed) > old prop read: fiDB.ptk_g9XAN03 (failed) > prop read: /org/freedesktop/Hal/devices/pci_1022_1101 (failed) > prop read: W1j0.KIhk9ketuO3 (failed) > old prop read: W1j0.KIhk9ketuO3 (failed) > prop read: /org/freedesktop/Hal/devices/pci_1022_1102 (failed) > prop read: OMCs.ridUeImaQn3 (failed) > old prop read: OMCs.ridUeImaQn3 (failed) > prop read: /org/freedesktop/Hal/devices/pci_1022_1103 (failed) > prop read: Fhhh.M7aE7ttHy94 (failed) > old prop read: Fhhh.M7aE7ttHy94 (failed) > prop read: /org/freedesktop/Hal/devices/pci_10de_2d (failed) > prop read: VCu0.TAAB5++Hj50 (ok) > prop read: /org/freedesktop/Hal/devices/pci_8086_1229 (failed) > prop read: JNkJ.BBoloR8Jpr5 (ok) > prop read: rdCR.7RG8lK_UzJ9 (failed) > old prop read: rdCR.7RG8lK_UzJ9 (failed) > prop read: /org/freedesktop/Hal/devices/storage_model_LITE_ON_DVD_SOHD_167T (failed) > prop read: iqvy.totDbSE5y2D (failed) > old prop read: iqvy.totDbSE5y2D (failed) > prop read: /org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD (failed) > prop read: mE25.KXeGb94kPSE (failed) > old prop read: mE25.KXeGb94kPSE (failed) > prop read: /org/freedesktop/Hal/devices/volume_part1_size_1077479424 (failed) > prop read: 1tKY.SE1wIdpsiiC (failed) > old prop read: 1tKY.SE1wIdpsiiC (failed) > prop read: /org/freedesktop/Hal/devices/volume_uuid_70176bdf_56db_4a78_8ece_5b88b8a48a5d (failed) > prop read: U2bc.SE1wIdpsiiC (failed) > old prop read: U2bc.SE1wIdpsiiC (failed) > prop read: /org/freedesktop/Hal/devices/volume_uuid_4e557ca8_6263_4b1f_96fb_73bb416727c0 (failed) > prop read: xDrg.SE1wIdpsiiC (failed) > old prop read: xDrg.SE1wIdpsiiC (failed) > prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0_if0 (failed) > prop read: k4bc.B3CVguLVAY1 (failed) > old prop read: k4bc.B3CVguLVAY1 (failed) > prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1_if0 (failed) > prop read: pBe4.ynG42f8D7q8 (failed) > old prop read: pBe4.ynG42f8D7q8 (failed) > prop read: /org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0_printer_noserial (ok) > prop read: /org/freedesktop/Hal/devices/usb_device_4b8_5_HU22Y0410250635140_if0_printer_noserial (ok) > prop read: /org/freedesktop/Hal/devices/usb_device_451_1446_noserial_if0 (failed) > prop read: FKGF.8T3QcmdDop7 (failed) > old prop read: FKGF.8T3QcmdDop7 (failed) > prop read: /org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0_logicaldev_input (failed) > prop read: hSuP.1ySfNMKFka1 (failed) > old prop read: hSuP.1ySfNMKFka1 (failed) > prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2_if0 (failed) > prop read: uIhY.jWLfPPxw360 (failed) > old prop read: uIhY.jWLfPPxw360 (failed) > prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3_if0 (failed) > prop read: zPk0.ATzmUGh6a5F (failed) > old prop read: zPk0.ATzmUGh6a5F (failed) > prop read: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input (failed) > prop read: EXC1.TBWTwSuMeW2 (failed) > old prop read: EXC1.TBWTwSuMeW2 (failed) > prop read: rdCR.j8NaKXDZtZ6 (failed) > old prop read: rdCR.j8NaKXDZtZ6 (failed) > prop read: Fyby.5lXXuQkv_C5 (failed) > old prop read: Fyby.5lXXuQkv_C5 (failed) > prop read: /org/freedesktop/Hal/devices/net_00_0b_6a_7b_ad_7b (failed) > prop read: usDW.ndpeucax6V1 (failed) > old prop read: usDW.ndpeucax6V1 (failed) > prop read: /org/freedesktop/Hal/devices/net_00_90_27_4f_7c_df (failed) > prop read: L2Ua.ndpeucax6V1 (failed) > old prop read: L2Ua.ndpeucax6V1 (failed) > prop read: ZsBS.GQNx7L4uPNA (failed) > old prop read: ZsBS.GQNx7L4uPNA (failed) > prop read: wl2P.nfEXJulusj6 (failed) > old prop read: wl2P.nfEXJulusj6 (failed) >----- /proc/modules ----- > usbserial 36180 0 - Live 0xffffffff8834d000 > hfsplus 85640 0 - Live 0xffffffff88337000 > vfat 15872 0 - Live 0xffffffff88332000 > fat 58032 1 vfat, Live 0xffffffff88322000 > subfs 9472 1 - Live 0xffffffff8831e000 > cpufreq_ondemand 8108 1 - Live 0xffffffff8831b000 > cpufreq_userspace 5828 0 - Live 0xffffffff88318000 > cpufreq_powersave 2304 0 - Live 0xffffffff8819a000 > powernow_k8 11792 1 - Live 0xffffffff88314000 > freq_table 5512 1 powernow_k8, Live 0xffffffff88311000 > autofs4 22664 3 - Live 0xffffffff8830a000 > nfsd 287720 5 - Live 0xffffffff882c2000 > exportfs 6912 1 nfsd, Live 0xffffffff882bf000 > ipv6 289024 16 - Live 0xffffffff88277000 > pcc_acpi 16896 0 - Live 0xffffffff88271000 > sony_acpi 6420 0 - Live 0xffffffff8826e000 > snd_pcm_oss 70432 0 - Live 0xffffffff8825b000 > snd_mixer_oss 22144 1 snd_pcm_oss, Live 0xffffffff88254000 > button 8224 0 - Live 0xffffffff88250000 > battery 11400 0 - Live 0xffffffff8824c000 > ac 6152 0 - Live 0xffffffff88249000 > usblp 15488 0 - Live 0xffffffff88244000 > usbhid 49696 0 - Live 0xffffffff88236000 > af_packet 25356 2 - Live 0xffffffff8822e000 > ide_cd 45984 0 - Live 0xffffffff88221000 > cdrom 40888 1 ide_cd, Live 0xffffffff88216000 > floppy 73792 0 - Live 0xffffffff88202000 > edd 12448 0 - Live 0xffffffff881fd000 > e100 42752 0 - Live 0xffffffff881f1000 > mii 6784 1 e100, Live 0xffffffff881ee000 > ehci_hcd 36744 0 - Live 0xffffffff881e4000 > i2c_ali1535 8580 0 - Live 0xffffffff881e0000 > i2c_ali15x3 8964 0 - Live 0xffffffff881dc000 > tulip 59296 0 - Live 0xffffffff881cc000 > ohci_hcd 22916 0 - Live 0xffffffff881c5000 > generic 5892 0 [permanent], Live 0xffffffff881c2000 > usbcore 140724 6 usbserial,usblp,usbhid,ehci_hcd,ohci_hcd, Live 0xffffffff8819c000 > snd_intel8x0 39456 0 - Live 0xffffffff8818f000 > i2c_ali1563 8324 0 - Live 0xffffffff8818b000 > i2c_core 25752 3 i2c_ali1535,i2c_ali15x3,i2c_ali1563, Live 0xffffffff88183000 > snd_ac97_codec 116804 1 snd_intel8x0, Live 0xffffffff88165000 > snd_ac97_bus 3328 1 snd_ac97_codec, Live 0xffffffff880f0000 > snd_pcm 117260 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec, Live 0xffffffff88147000 > snd_timer 29320 1 snd_pcm, Live 0xffffffff8813e000 > snd 77600 6 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer, Live 0xffffffff8812a000 > soundcore 11808 1 snd, Live 0xffffffff88126000 > snd_page_alloc 13200 2 snd_intel8x0,snd_pcm, Live 0xffffffff88121000 > shpchp 101032 0 - Live 0xffffffff88107000 > pci_hotplug 31720 1 shpchp, Live 0xffffffff880fe000 > parport_pc 44912 1 - Live 0xffffffff880f2000 > lp 14336 0 - Live 0xffffffff880eb000 > parport 43532 2 parport_pc,lp, Live 0xffffffff880df000 > dm_mod 65648 0 - Live 0xffffffff880cd000 > ext3 151952 2 - Live 0xffffffff880a6000 > jbd 72512 1 ext3, Live 0xffffffff88093000 > sg 42544 0 - Live 0xffffffff88087000 > fan 5768 0 - Live 0xffffffff88084000 > thermal 16524 0 - Live 0xffffffff8807e000 > processor 26192 2 powernow_k8,thermal, Live 0xffffffff88076000 > sata_uli 8704 3 - Live 0xffffffff88072000 > libata 55304 1 sata_uli, Live 0xffffffff88063000 > alim15x3 13212 0 [permanent], Live 0xffffffff8805e000 > sd_mod 20760 4 - Live 0xffffffff88057000 > scsi_mod 161592 3 sg,libata,sd_mod, Live 0xffffffff8802e000 > ide_disk 19584 0 - Live 0xffffffff88028000 > ide_core 158616 4 ide_cd,generic,alim15x3,ide_disk, Live 0xffffffff88000000 >----- /proc/modules end ----- > used irqs: 0,1,4,8,9,10,14,17,25,41,49,57 >=========== end debug info ============ >01: None 00.0: 0102 Floppy disk controller > [Created at floppy.112] > Unique ID: rdCR.3wRL2_g4d2B > Hardware Class: storage > Model: "Floppy disk controller" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >02: Floppy 00.0: 10603 Floppy Disk > [Created at floppy.120] > UDI: /org/freedesktop/Hal/devices/computer_storage > Unique ID: sPPV.oZ89vuho4Y3 > Parent ID: rdCR.3wRL2_g4d2B > Hardware Class: floppy > Model: "Floppy Disk" > Device File: /dev/fd0 > Size: 3.5 '' > Size: 2880 sectors a 512 bytes > Drive status: no medium > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #1 (Floppy disk controller) > >03: None 00.0: 10105 BIOS > [Created at bios.154] > Unique ID: rdCR.lZF+r4EgHp4 > Hardware Class: bios > BIOS Keyboard LED Status: > Scroll Lock: off > Num Lock: off > Caps Lock: off > BIOS: extended read supported > Config Status: cfg=new, avail=yes, need=no, active=unknown > >04: None 00.0: 10107 System > [Created at sys.56] > Unique ID: rdCR.n_7QNeEnh23 > Hardware Class: system > Model: "System" > Driver Info #0: > Driver Status: thermal,fan are active > Driver Activation Cmd: "modprobe thermal; modprobe fan" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >05: None 00.0: 10104 FPU > [Created at misc.190] > Unique ID: rdCR.EMpH5pjcahD > Hardware Class: unknown > Model: "FPU" > I/O Ports: 0xf0-0xff (rw) > Config Status: cfg=new, avail=yes, need=no, active=unknown > >06: None 00.0: 0801 DMA controller (8237) > [Created at misc.204] > Unique ID: rdCR.f5u1ucRm+H9 > Hardware Class: unknown > Model: "DMA controller" > I/O Ports: 0x00-0x1f (rw) > I/O Ports: 0xc0-0xdf (rw) > I/O Ports: 0x80-0x8f (rw) > DMA: 4 > Config Status: cfg=new, avail=yes, need=no, active=unknown > >07: None 00.0: 0800 PIC (8259) > [Created at misc.217] > Unique ID: rdCR.8uRK7LxiIA2 > Hardware Class: unknown > Model: "PIC" > I/O Ports: 0x20-0x21 (rw) > I/O Ports: 0xa0-0xa1 (rw) > Config Status: cfg=new, avail=yes, need=no, active=unknown > >08: None 00.0: 0802 Timer (8254) > [Created at misc.228] > Unique ID: rdCR.AJKleuxpiP0 > Hardware Class: unknown > Model: "Timer" > IRQ: 0 (147258237 events) > Config Status: cfg=new, avail=yes, need=no, active=unknown > >09: None 00.0: 0803 RTC (Generic) > [Created at misc.239] > Unique ID: rdCR.hWmSPAStPX7 > Hardware Class: unknown > Model: "RTC" > I/O Ports: 0x70-0x77 (rw) > IRQ: 8 (no events) > Config Status: cfg=new, avail=yes, need=no, active=unknown > >10: None 00.0: 0900 Keyboard controller > [Created at misc.249] > Unique ID: rdCR.9N+EecqykME > Hardware Class: unknown > Model: "Keyboard controller" > I/O Ports: 0x60-0x6f (rw) > Config Status: cfg=new, avail=yes, need=no, active=unknown > >11: None 00.0: 0701 Parallel controller (SPP) > [Created at misc.260] > Unique ID: YMnp.ecK7NLYWZ5D > Hardware Class: unknown > Model: "Parallel controller" > Device File: /dev/lp0 > I/O Ports: 0x378-0x37a (rw) > I/O Ports: 0x37b-0x37f (rw) > Config Status: cfg=new, avail=yes, need=no, active=unknown > >13: None 00.0: 10102 Main Memory > [Created at memory.59] > Unique ID: rdCR.CxwsZFjVASF > Hardware Class: memory > Model: "Main Memory" > Memory Range: 0x00000000-0x1ffaffff (rw) > Memory Size: 512 MB > Config Status: cfg=new, avail=yes, need=no, active=unknown > >14: PCI 00.0: 0600 Host bridge > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_1689 > Unique ID: qLht.05BmTiV0RY9 > SysFS ID: /devices/pci0000:00/0000:00:00.0 > SysFS BusID: 0000:00:00.0 > Hardware Class: bridge > Model: "ALi M1689 K8 Northbridge [Super K8 Single Chip]" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x1689 "M1689 K8 Northbridge [Super K8 Single Chip]" > Driver: "agpgart-amd64" > Memory Range: 0xf8000000-0xfbffffff (rw,prefetchable) > Module Alias: "pci:v000010B9d00001689sv00000000sd00000000bc06sc00i00" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >15: PCI 01.0: 0604 PCI bridge (Normal decode) > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_5246 > Unique ID: vSkL.zGxv3_xDdlC > SysFS ID: /devices/pci0000:00/0000:00:01.0 > SysFS BusID: 0000:00:01.0 > Hardware Class: bridge > Model: "ALi AGP8X Controller" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x5246 "AGP8X Controller" > Module Alias: "pci:v000010B9d00005246sv00000000sd00000000bc06sc04i00" > Driver Info #0: > Driver Status: shpchp is active > Driver Activation Cmd: "modprobe shpchp" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >16: PCI 02.0: 0604 PCI bridge (Subtractive decode) > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_5249 > Unique ID: _Znp.Xi7km9jxxp1 > SysFS ID: /devices/pci0000:00/0000:00:02.0 > SysFS BusID: 0000:00:02.0 > Hardware Class: bridge > Model: "ALi M5249 HTT to PCI Bridge" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x5249 "M5249 HTT to PCI Bridge" > Module Alias: "pci:v000010B9d00005249sv00000000sd00000000bc06sc04i01" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >17: PCI 03.0: 0601 ISA bridge > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_1563 > Unique ID: 3hqH.5rwKtZcxSz9 > SysFS ID: /devices/pci0000:00/0000:00:03.0 > SysFS BusID: 0000:00:03.0 > Hardware Class: bridge > Model: "ASRock In M1563 HyperTransport South Bridge" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x1563 "M1563 HyperTransport South Bridge" > SubVendor: pci 0x1849 "ASRock Incorporation" > SubDevice: pci 0x1563 > Revision: 0x70 > Driver: "ali1563_i2c" > Module Alias: "pci:v000010B9d00001563sv00001849sd00001563bc06sc01i00" > Driver Info #0: > Driver Status: i2c_ali1563 is active > Driver Activation Cmd: "modprobe i2c_ali1563" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >18: PCI 03.1: 0680 Bridge > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_7101 > Unique ID: w+J7.egvSauENMU7 > SysFS ID: /devices/pci0000:00/0000:00:03.1 > SysFS BusID: 0000:00:03.1 > Hardware Class: bridge > Model: "ASRock In M7101 Power Management Controller [PMU]" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x7101 "M7101 Power Management Controller [PMU]" > SubVendor: pci 0x1849 "ASRock Incorporation" > SubDevice: pci 0x7101 > Module Alias: "pci:v000010B9d00007101sv00001849sd00007101bc06sc80i00" > Driver Info #0: > Driver Status: i2c_ali15x3 is active > Driver Activation Cmd: "modprobe i2c_ali15x3" > Driver Info #1: > Driver Status: i2c_ali1535 is active > Driver Activation Cmd: "modprobe i2c_ali1535" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >19: PCI 04.0: 0401 Multimedia audio controller > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_5455 > Unique ID: 8otl.qAIzqAgBao4 > SysFS ID: /devices/pci0000:00/0000:00:04.0 > SysFS BusID: 0000:00:04.0 > Hardware Class: sound > Model: "ASRock In M5455 PCI AC-Link Controller Audio Device" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x5455 "M5455 PCI AC-Link Controller Audio Device" > SubVendor: pci 0x1849 "ASRock Incorporation" > SubDevice: pci 0x0850 > Revision: 0x20 > Driver: "Intel ICH" > I/O Ports: 0xe800-0xe8ff (rw) > Memory Range: 0xfebff000-0xfebfffff (rw,non-prefetchable) > IRQ: 177 (26687796 events) > Module Alias: "pci:v000010B9d00005455sv00001849sd00000850bc04sc01i00" > Driver Info #0: > Driver Status: snd_intel8x0 is active > Driver Activation Cmd: "modprobe snd_intel8x0" > Driver Info #1: > Driver Status: ali5455 is not active > Driver Activation Cmd: "modprobe ali5455" > Config Status: cfg=yes, avail=yes, need=no, active=unknown > >20: PCI 0d.0: 0200 Ethernet controller > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_5263 > Unique ID: rBUF.wnomy9rZnZ9 > SysFS ID: /devices/pci0000:00/0000:00:0d.0 > SysFS BusID: 0000:00:0d.0 > Hardware Class: network > Model: "ASRock In M5263 Ethernet Controller" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x5263 "M5263 Ethernet Controller" > SubVendor: pci 0x1849 "ASRock Incorporation" > SubDevice: pci 0x5263 > Revision: 0x40 > Driver: "tulip" > Device File: eth0 > I/O Ports: 0xe400-0xe4ff (rw) > Memory Range: 0xfebfec00-0xfebfecff (rw,non-prefetchable) > IRQ: 201 (no events) > HW Address: 00:0b:6a:7b:ad:7b > Module Alias: "pci:v000010B9d00005263sv00001849sd00005263bc02sc00i00" > Driver Info #0: > Driver Status: tulip is active > Driver Activation Cmd: "modprobe tulip" > Config Status: cfg=no, avail=yes, need=no, active=unknown > >21: PCI 0e.0: 0101 IDE interface > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_5229 > Unique ID: vuMS.luyn6jFx3jC > SysFS ID: /devices/pci0000:00/0000:00:0e.0 > SysFS BusID: 0000:00:0e.0 > Hardware Class: storage > Model: "ALi M5229 IDE" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x5229 "M5229 IDE" > SubVendor: pci 0x10b9 "ALi Corporation" > SubDevice: pci 0x5229 > Revision: 0xc7 > Driver: "ALI15x3_IDE" > I/O Ports: 0xff00-0xff0f (rw) > IRQ: 169 (1074407 events) > I/O Ports: 0x1f0-0x1f7 (rw) > I/O Port: 0x3f6 (rw) > IRQ: 14 (5290254 events) > Module Alias: "pci:v000010B9d00005229sv000010B9sd00005229bc01sc01ifa" > Driver Info #0: > Driver Status: alim15x3 is active > Driver Activation Cmd: "modprobe alim15x3" > Driver Info #1: > Driver Status: generic is active > Driver Activation Cmd: "modprobe generic" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >22: PCI 0e.1: 0180 Unknown mass storage controller > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_5289 > Unique ID: mDsH.a+poeoZUR54 > SysFS ID: /devices/pci0000:00/0000:00:0e.1 > SysFS BusID: 0000:00:0e.1 > Hardware Class: storage > Model: "ASRock In ULi 5289 SATA" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x5289 "ULi 5289 SATA" > SubVendor: pci 0x1849 "ASRock Incorporation" > SubDevice: pci 0x5289 > Revision: 0x10 > Driver: "sata_uli" > I/O Ports: 0xf80-0xf87 (rw) > I/O Ports: 0xf00-0xf03 (rw) > I/O Ports: 0xe80-0xe87 (rw) > I/O Ports: 0xe00-0xe03 (rw) > I/O Ports: 0xd880-0xd88f (rw) > IRQ: 169 (1074407 events) > Module Alias: "pci:v000010B9d00005289sv00001849sd00005289bc01sc80i8f" > Driver Info #0: > Driver Status: sata_uli is active > Driver Activation Cmd: "modprobe sata_uli" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >23: PCI 0f.0: 0c03 USB Controller (OHCI) > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_5237_1 > Unique ID: _+Pw.2qM5X9cC8j9 > SysFS ID: /devices/pci0000:00/0000:00:0f.0 > SysFS BusID: 0000:00:0f.0 > Hardware Class: usb controller > Model: "ASRock In USB 1.1 Controller" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x5237 "USB 1.1 Controller" > SubVendor: pci 0x1849 "ASRock Incorporation" > SubDevice: pci 0x5237 > Revision: 0x03 > Driver: "ohci_hcd" > Memory Range: 0xfebfd000-0xfebfdfff (rw,non-prefetchable) > IRQ: 185 (no events) > Module Alias: "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10" > Driver Info #0: > Driver Status: ohci-hcd is active > Driver Activation Cmd: "modprobe ohci-hcd" > Driver Info #1: > Driver Status: ohci_hcd is active > Driver Activation Cmd: "modprobe ohci_hcd" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >24: PCI 0f.1: 0c03 USB Controller (OHCI) > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_5237_0 > Unique ID: rKvl.2qM5X9cC8j9 > SysFS ID: /devices/pci0000:00/0000:00:0f.1 > SysFS BusID: 0000:00:0f.1 > Hardware Class: usb controller > Model: "ASRock In USB 1.1 Controller" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x5237 "USB 1.1 Controller" > SubVendor: pci 0x1849 "ASRock Incorporation" > SubDevice: pci 0x5237 > Revision: 0x03 > Driver: "ohci_hcd" > Memory Range: 0xfebfc000-0xfebfcfff (rw,non-prefetchable) > IRQ: 193 (708 events) > Module Alias: "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10" > Driver Info #0: > Driver Status: ohci-hcd is active > Driver Activation Cmd: "modprobe ohci-hcd" > Driver Info #1: > Driver Status: ohci_hcd is active > Driver Activation Cmd: "modprobe ohci_hcd" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >25: PCI 0f.2: 0c03 USB Controller (OHCI) > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_5237 > Unique ID: ifOb.2qM5X9cC8j9 > SysFS ID: /devices/pci0000:00/0000:00:0f.2 > SysFS BusID: 0000:00:0f.2 > Hardware Class: usb controller > Model: "ASRock In USB 1.1 Controller" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x5237 "USB 1.1 Controller" > SubVendor: pci 0x1849 "ASRock Incorporation" > SubDevice: pci 0x5237 > Revision: 0x03 > Driver: "ohci_hcd" > Memory Range: 0xfebfb000-0xfebfbfff (rw,non-prefetchable) > IRQ: 209 (no events) > Module Alias: "pci:v000010B9d00005237sv00001849sd00005237bc0Csc03i10" > Driver Info #0: > Driver Status: ohci-hcd is active > Driver Activation Cmd: "modprobe ohci-hcd" > Driver Info #1: > Driver Status: ohci_hcd is active > Driver Activation Cmd: "modprobe ohci_hcd" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >26: PCI 0f.3: 0c03 USB Controller (EHCI) > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10b9_5239 > Unique ID: a_tQ.KFUNkdo9MlF > SysFS ID: /devices/pci0000:00/0000:00:0f.3 > SysFS BusID: 0000:00:0f.3 > Hardware Class: usb controller > Model: "ASRock In USB 2.0 Controller" > Vendor: pci 0x10b9 "ALi Corporation" > Device: pci 0x5239 "USB 2.0 Controller" > SubVendor: pci 0x1849 "ASRock Incorporation" > SubDevice: pci 0x5239 > Revision: 0x01 > Driver: "ehci_hcd" > Memory Range: 0xfebfe800-0xfebfe8ff (rw,non-prefetchable) > IRQ: 217 (49 events) > Module Alias: "pci:v000010B9d00005239sv00001849sd00005239bc0Csc03i20" > Driver Info #0: > Driver Status: ehci-hcd is active > Driver Activation Cmd: "modprobe ehci-hcd" > Driver Info #1: > Driver Status: ehci_hcd is active > Driver Activation Cmd: "modprobe ehci_hcd" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >27: PCI 18.0: 0600 Host bridge > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_1022_1100 > Unique ID: fiDB.ptk_g9XAN03 > SysFS ID: /devices/pci0000:00/0000:00:18.0 > SysFS BusID: 0000:00:18.0 > Hardware Class: bridge > Model: "AMD K8 [Athlon64/Opteron] HyperTransport Technology Configuration" > Vendor: pci 0x1022 "AMD" > Device: pci 0x1100 "K8 [Athlon64/Opteron] HyperTransport Technology Configuration" > Module Alias: "pci:v00001022d00001100sv00000000sd00000000bc06sc00i00" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >28: PCI 18.1: 0600 Host bridge > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_1022_1101 > Unique ID: W1j0.KIhk9ketuO3 > SysFS ID: /devices/pci0000:00/0000:00:18.1 > SysFS BusID: 0000:00:18.1 > Hardware Class: bridge > Model: "AMD K8 [Athlon64/Opteron] Address Map" > Vendor: pci 0x1022 "AMD" > Device: pci 0x1101 "K8 [Athlon64/Opteron] Address Map" > Module Alias: "pci:v00001022d00001101sv00000000sd00000000bc06sc00i00" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >29: PCI 18.2: 0600 Host bridge > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_1022_1102 > Unique ID: OMCs.ridUeImaQn3 > SysFS ID: /devices/pci0000:00/0000:00:18.2 > SysFS BusID: 0000:00:18.2 > Hardware Class: bridge > Model: "AMD K8 [Athlon64/Opteron] DRAM Controller" > Vendor: pci 0x1022 "AMD" > Device: pci 0x1102 "K8 [Athlon64/Opteron] DRAM Controller" > Module Alias: "pci:v00001022d00001102sv00000000sd00000000bc06sc00i00" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >30: PCI 18.3: 0600 Host bridge > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_1022_1103 > Unique ID: Fhhh.M7aE7ttHy94 > SysFS ID: /devices/pci0000:00/0000:00:18.3 > SysFS BusID: 0000:00:18.3 > Hardware Class: bridge > Model: "AMD K8 [Athlon64/Opteron] Miscellaneous Control" > Vendor: pci 0x1022 "AMD" > Device: pci 0x1103 "K8 [Athlon64/Opteron] Miscellaneous Control" > Module Alias: "pci:v00001022d00001103sv00000000sd00000000bc06sc00i00" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >31: PCI 100.0: 0300 VGA compatible controller (VGA) > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_10de_2d > Unique ID: VCu0.TAAB5++Hj50 > Parent ID: vSkL.zGxv3_xDdlC > SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 > SysFS BusID: 0000:01:00.0 > Hardware Class: graphics card > Model: "Micro-Star International MSI-8808" > Vendor: pci 0x10de "nVidia Corporation" > Device: pci 0x002d "RIVA TNT2 Model 64/Model 64 Pro" > SubVendor: pci 0x1462 "Micro-Star International Co., Ltd." > SubDevice: pci 0x8808 "MSI-8808" > Revision: 0x15 > Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable) > Memory Range: 0xf2000000-0xf3ffffff (rw,prefetchable) > Memory Range: 0xf0400000-0xf040ffff (ro,prefetchable,disabled) > IRQ: 10 (no events) > I/O Ports: 0x3c0-0x3df (rw) > Module Alias: "pci:v000010DEd0000002Dsv00001462sd00008808bc03sc00i00" > Driver Info #0: > XFree86 v4 Server Module: nv > Config Status: cfg=yes, avail=yes, need=yes, active=unknown > Attached to: #15 (PCI bridge) > >32: PCI 206.0: 0200 Ethernet controller > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_8086_1229 > Unique ID: JNkJ.BBoloR8Jpr5 > Parent ID: _Znp.Xi7km9jxxp1 > SysFS ID: /devices/pci0000:00/0000:00:02.0/0000:02:06.0 > SysFS BusID: 0000:02:06.0 > Hardware Class: network > Model: "Intel EtherExpress PRO/100+" > Vendor: pci 0x8086 "Intel Corporation" > Device: pci 0x1229 "82557/8/9 [Ethernet Pro 100]" > SubVendor: pci 0x8086 "Intel Corporation" > SubDevice: pci 0x0009 "EtherExpress PRO/100+" > Revision: 0x05 > Driver: "e100" > Device File: eth1 > Memory Range: 0xf44ff000-0xf44fffff (rw,prefetchable) > I/O Ports: 0xcc00-0xcc1f (rw) > Memory Range: 0xfea00000-0xfeafffff (rw,non-prefetchable) > Memory Range: 0xfe700000-0xfe7fffff (ro,prefetchable,disabled) > IRQ: 177 (26687796 events) > HW Address: 00:90:27:4f:7c:df > Module Alias: "pci:v00008086d00001229sv00008086sd00000009bc02sc00i00" > Driver Info #0: > Driver Status: e100 is active > Driver Activation Cmd: "modprobe e100" > Driver Info #1: > Driver Status: eepro100 is not active > Driver Activation Cmd: "modprobe eepro100" > Config Status: cfg=no, avail=yes, need=no, active=unknown > Attached to: #16 (PCI bridge) > >33: None 00.0: 0700 Serial controller > [Created at misc.458] > Unique ID: rdCR.7RG8lK_UzJ9 > Hardware Class: unknown > Model: "Serial controller" > I/O Ports: 0x3f8-0x3ff (rw) > IRQ: 4 (3303 events) > Config Status: cfg=new, avail=yes, need=no, active=unknown > >34: IDE 01.0: 10602 CD-ROM (DVD) > [Created at block.192] > UDI: /org/freedesktop/Hal/devices/storage_model_LITE_ON_DVD_SOHD_167T > Unique ID: iqvy.totDbSE5y2D > Parent ID: vuMS.luyn6jFx3jC > SysFS ID: /block/hdb > SysFS BusID: 0.1 > SysFS Device Link: /devices/pci0000:00/0000:00:0e.0/ide0/0.1 > Hardware Class: cdrom > Model: "LITE-ON DVD SOHD-167T" > Vendor: "LITE-ON" > Device: "DVD SOHD-167T" > Driver: "ALI15x3_IDE", "ide-cdrom", "ide-cdrom" > Device File: /dev/dvd > Device Files: /dev/hdb, /dev/dvd, /dev/cdrom, /dev/disk/by-path/pci-0000:00:0e.0-ide-0:1 > Device Number: block 3:64 > Features: DVD > Size: 0 sectors a 512 bytes > Drive status: no medium > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #21 (IDE interface) > Drive Speed: 48 > >35: IDE 00.0: 10600 Disk > [Created at block.188] > UDI: /org/freedesktop/Hal/devices/storage_serial_VN6BHECBDYJ8YD > Unique ID: mE25.KXeGb94kPSE > Parent ID: mDsH.a+poeoZUR54 > SysFS ID: /block/sda > SysFS BusID: 0:0:0:0 > SysFS Device Link: /devices/pci0000:00/0000:00:0e.1/host0/target0:0:0/0:0:0:0 > Hardware Class: disk > Model: "HDS722580VLSA80" > Device: "HDS722580VLSA80" > Revision: "V32O" > Driver: "sata_uli", "sd" > Device File: /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD > Device Files: /dev/sda, /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD, /dev/disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0 > Device Number: block 8:0-8:15 > BIOS id: 0x80 > Geometry (BIOS EDD): CHS 10011/255/63 > Size (BIOS EDD): 160836478 sectors > Geometry (BIOS Legacy): CHS 1024/255/63 > Drive status: no medium > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #22 (Unknown mass storage controller) > >36: None 00.0: 11300 Partition > [Created at block.357] > UDI: /org/freedesktop/Hal/devices/volume_part1_size_1077479424 > Unique ID: 1tKY.SE1wIdpsiiC > Parent ID: mE25.KXeGb94kPSE > SysFS ID: /block/sda/sda1 > Hardware Class: partition > Model: "Partition" > Device File: /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part1 > Device Files: /dev/sda1, /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part1, /dev/disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part1 > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #35 (Disk) > >37: None 00.0: 11300 Partition > [Created at block.357] > UDI: /org/freedesktop/Hal/devices/volume_uuid_70176bdf_56db_4a78_8ece_5b88b8a48a5d > Unique ID: U2bc.SE1wIdpsiiC > Parent ID: mE25.KXeGb94kPSE > SysFS ID: /block/sda/sda2 > Hardware Class: partition > Model: "Partition" > Device File: /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part2 > Device Files: /dev/sda2, /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part2, /dev/disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part2, /dev/disk/by-uuid/70176bdf-56db-4a78-8ece-5b88b8a48a5d > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #35 (Disk) > >38: None 00.0: 11300 Partition > [Created at block.357] > UDI: /org/freedesktop/Hal/devices/volume_uuid_4e557ca8_6263_4b1f_96fb_73bb416727c0 > Unique ID: xDrg.SE1wIdpsiiC > Parent ID: mE25.KXeGb94kPSE > SysFS ID: /block/sda/sda3 > Hardware Class: partition > Model: "Partition" > Device File: /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part3 > Device Files: /dev/sda3, /dev/disk/by-id/scsi-SATA_HDS722580VLSA80_VN6BHECBDYJ8YD-part3, /dev/disk/by-path/pci-0000:00:0e.1-scsi-0:0:0:0-part3, /dev/disk/by-uuid/4e557ca8-6263-4b1f-96fb-73bb416727c0 > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #35 (Disk) > >39: USB 00.0: 10a00 Hub > [Created at usb.122] > UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_0_if0 > Unique ID: k4bc.B3CVguLVAY1 > Parent ID: _+Pw.2qM5X9cC8j9 > SysFS ID: /devices/pci0000:00/0000:00:0f.0/usb1/1-0:1.0 > SysFS BusID: 1-0:1.0 > Hardware Class: hub > Model: "Linux 2.6.13-3-default ohci_hcd OHCI Host Controller" > Hotplug: USB > Vendor: "Linux 2.6.13-3-default ohci_hcd" > Device: "OHCI Host Controller" > Revision: "2.06" > Serial ID: "0000:00:0f.0" > Driver: "hub" > Speed: 12 Mbps > Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*" > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #23 (USB Controller) > >40: USB 00.0: 10a00 Hub > [Created at usb.122] > UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_1_if0 > Unique ID: pBe4.ynG42f8D7q8 > Parent ID: rKvl.2qM5X9cC8j9 > SysFS ID: /devices/pci0000:00/0000:00:0f.1/usb2/2-0:1.0 > SysFS BusID: 2-0:1.0 > Hardware Class: hub > Model: "Linux 2.6.13-3-default ohci_hcd OHCI Host Controller" > Hotplug: USB > Vendor: "Linux 2.6.13-3-default ohci_hcd" > Device: "OHCI Host Controller" > Revision: "2.06" > Serial ID: "0000:00:0f.1" > Driver: "hub" > Speed: 12 Mbps > Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*" > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #24 (USB Controller) > >41: USB 00.0: 10900 Printer > [Created at usb.122] > UDI: /org/freedesktop/Hal/devices/usb_device_4b8_5_L84NO0009270827130_if0_printer_noserial > Unique ID: JPTW.Li3mAdnD6n6 > Parent ID: FKGF.8T3QcmdDop7 > SysFS ID: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.3/2-1.3:1.0 > SysFS BusID: 2-1.3:1.0 > Hardware Class: printer > Model: "Epson Stylus Printer" > Hotplug: USB > Vendor: usb 0x04b8 "Epson" > Device: usb 0x0005 "Stylus Printer" > Revision: "1.00" > Serial ID: "L84NO0009270827130" > Driver: "usblp" > Device File: /dev/usb/lp0 > Device Number: char 180:0 > Speed: 12 Mbps > Module Alias: "usb:v04B8p0005d0100dc00dsc00dp00ic07isc01ip02" > Driver Info #0: > Driver Status: usblp is active > Driver Activation Cmd: "modprobe usblp" > Config Status: cfg=no, avail=yes, need=no, active=unknown > Attached to: #43 (Hub) > >42: USB 00.0: 10900 Printer > [Created at usb.122] > UDI: /org/freedesktop/Hal/devices/usb_device_4b8_5_HU22Y0410250635140_if0_printer_noserial > Unique ID: lX5h.Y2zMzy62KLD > Parent ID: FKGF.8T3QcmdDop7 > SysFS ID: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1.4/2-1.4:1.0 > SysFS BusID: 2-1.4:1.0 > Hardware Class: printer > Model: "Epson Stylus Printer" > Hotplug: USB > Vendor: usb 0x04b8 "Epson" > Device: usb 0x0005 "Stylus Printer" > Revision: "1.00" > Serial ID: "HU22Y0410250635140" > Driver: "usblp" > Device File: /dev/usb/lp1 > Device Number: char 180:1 > Speed: 12 Mbps > Module Alias: "usb:v04B8p0005d0100dc00dsc00dp00ic07isc01ip02" > Driver Info #0: > Driver Status: usblp is active > Driver Activation Cmd: "modprobe usblp" > Config Status: cfg=no, avail=yes, need=no, active=unknown > Attached to: #43 (Hub) > >43: USB 00.0: 10a00 Hub > [Created at usb.122] > UDI: /org/freedesktop/Hal/devices/usb_device_451_1446_noserial_if0 > Unique ID: FKGF.8T3QcmdDop7 > Parent ID: pBe4.ynG42f8D7q8 > SysFS ID: /devices/pci0000:00/0000:00:0f.1/usb2/2-1/2-1:1.0 > SysFS BusID: 2-1:1.0 > Hardware Class: hub > Model: "Texas Instruments TUSB2040/2070 Hub" > Hotplug: USB > Vendor: usb 0x0451 "Texas Instruments" > Device: usb 0x1446 "TUSB2040/2070 Hub" > Revision: "1.10" > Driver: "hub" > Speed: 12 Mbps > Module Alias: "usb:v0451p1446d0110dc09dsc00dp00ic*isc*ip*" > Driver Info #0: > Driver Status: usbcore is active > Driver Activation Cmd: "modprobe usbcore" > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #40 (Hub) > >44: USB 00.0: 10503 USB Mouse > [Created at usb.122] > UDI: /org/freedesktop/Hal/devices/usb_device_1241_1111_noserial_if0_logicaldev_input > Unique ID: hSuP.1ySfNMKFka1 > Parent ID: pBe4.ynG42f8D7q8 > SysFS ID: /devices/pci0000:00/0000:00:0f.1/usb2/2-2/2-2:1.0 > SysFS BusID: 2-2:1.0 > Hardware Class: mouse > Model: "USB Mouse" > Hotplug: USB > Vendor: usb 0x1241 > Device: usb 0x1111 > Revision: "1.00" > Compatible to: int 0x0210 0x0013 > Driver: "usbhid" > Device File: /dev/input/mice (/dev/input/mouse0) > Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2 > Device Number: char 13:63 (char 13:32) > Speed: 1.5 Mbps > Module Alias: "usb:v1241p1111d0100dc00dsc00dp00ic03isc01ip02" > Driver Info #0: > Buttons: 3 > Wheels: 1 > XFree86 Protocol: explorerps/2 > GPM Protocol: exps2 > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #40 (Hub) > >45: USB 00.0: 10a00 Hub > [Created at usb.122] > UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_2_if0 > Unique ID: uIhY.jWLfPPxw360 > Parent ID: ifOb.2qM5X9cC8j9 > SysFS ID: /devices/pci0000:00/0000:00:0f.2/usb3/3-0:1.0 > SysFS BusID: 3-0:1.0 > Hardware Class: hub > Model: "Linux 2.6.13-3-default ohci_hcd OHCI Host Controller" > Hotplug: USB > Vendor: "Linux 2.6.13-3-default ohci_hcd" > Device: "OHCI Host Controller" > Revision: "2.06" > Serial ID: "0000:00:0f.2" > Driver: "hub" > Speed: 12 Mbps > Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*" > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #25 (USB Controller) > >46: USB 00.0: 10a00 Hub > [Created at usb.122] > UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_0f_3_if0 > Unique ID: zPk0.ATzmUGh6a5F > Parent ID: a_tQ.KFUNkdo9MlF > SysFS ID: /devices/pci0000:00/0000:00:0f.3/usb4/4-0:1.0 > SysFS BusID: 4-0:1.0 > Hardware Class: hub > Model: "Linux 2.6.13-3-default ehci_hcd EHCI Host Controller" > Hotplug: USB > Vendor: "Linux 2.6.13-3-default ehci_hcd" > Device: "EHCI Host Controller" > Revision: "2.06" > Serial ID: "0000:00:0f.3" > Driver: "hub" > Speed: 480 Mbps > Module Alias: "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*" > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #26 (USB Controller) > >47: PS/2 00.0: 10800 Keyboard > [Created at input.137] > UDI: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input > Unique ID: EXC1.TBWTwSuMeW2 > Hardware Class: keyboard > Model: "AT Translated Set 2 keyboard" > Vendor: int 0x0211 > Device: int 0x0001 "AT Translated Set 2 keyboard" > Device File: /dev/input/event1 > Device Number: char 13:65 > Driver Info #0: > XkbRules: xfree86 > XkbModel: pc104 > Config Status: cfg=new, avail=yes, need=no, active=unknown > >48: None 00.0: 10103 CPU > [Created at cpu.290] > Unique ID: rdCR.j8NaKXDZtZ6 > Hardware Class: cpu > Arch: X86-64 > Vendor: "AuthenticAMD" > Model: 15.15.0 "AMD Athlon(tm) 64 Processor 3500+" > Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,syscall,nx,mmxext,lm,3dnowext,3dnow > Clock: 1000 MHz > Cache: 512 kb > Config Status: cfg=new, avail=yes, need=no, active=unknown > >49: Serial 00.0: 10801 Console > [Created at kbd.159] > Unique ID: Fyby.5lXXuQkv_C5 > Hardware Class: keyboard > Model: "serial console" > Device: "serial console" > Device File: /dev/ttyS0 > Speed: 115.2 kbps > Config Status: cfg=new, avail=yes, need=no, active=unknown > >50: None 00.0: 10701 Ethernet > [Created at net.111] > UDI: /org/freedesktop/Hal/devices/net_00_0b_6a_7b_ad_7b > Unique ID: usDW.ndpeucax6V1 > Parent ID: rBUF.wnomy9rZnZ9 > SysFS ID: /class/net/eth0 > SysFS Device Link: /devices/pci0000:00/0000:00:0d.0 > Hardware Class: network interface > Model: "Ethernet network interface" > Device File: eth0 > HW Address: 00:0b:6a:7b:ad:7b > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #20 (Ethernet controller) > >51: None 01.0: 10701 Ethernet > [Created at net.111] > UDI: /org/freedesktop/Hal/devices/net_00_90_27_4f_7c_df > Unique ID: L2Ua.ndpeucax6V1 > Parent ID: JNkJ.BBoloR8Jpr5 > SysFS ID: /class/net/eth1 > SysFS Device Link: /devices/pci0000:00/0000:00:02.0/0000:02:06.0 > Hardware Class: network interface > Model: "Ethernet network interface" > Device File: eth1 > HW Address: 00:90:27:4f:7c:df > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #32 (Ethernet controller) > >52: None 00.0: 10700 Loopback > [Created at net.111] > Unique ID: ZsBS.GQNx7L4uPNA > SysFS ID: /class/net/lo > Hardware Class: network interface > Model: "Loopback network interface" > Device File: lo > Config Status: cfg=new, avail=yes, need=no, active=unknown > >53: None 00.0: 10781 Network Interface > [Created at net.111] > Unique ID: wl2P.nfEXJulusj6 > SysFS ID: /class/net/sit0 > Hardware Class: network interface > Model: "Network Interface" > Device File: sit0 > Config Status: cfg=new, avail=yes, need=no, active=unknown
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 114387
: 49564