Attachment 49627 Details for Bug 116395

hwinfo

hwinfo.txt (text/plain), 164.40 KB, created by Richard Heggs on 2005-09-12 14:41:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Richard Heggs

Created: 2005-09-12 14:41:43 UTC

Size: 164.40 KB

patch

obsolete

>============ start debug info ============
>libhd version 11.21 (x86-64)
>kernel version is 2.6
>----- /proc/cmdline -----
>  root=/dev/sda2 vga=normal
>----- /proc/cmdline end -----
>debug = 0xff7ffff7
>probe = 0x00138fc4aa17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc)
>shm: attached segment 327684 at 0x2aaaaaafc000
>>> hal.1: read hal data
>  hal: connected to: :1.31
>----- hal device list -----
>  0: udi = '/org/freedesktop/Hal/devices/volume_label_SU1000_001'
>  info.callouts.remove = { 'hald-subfs-mount' }
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hald-subfs-mount' }
>  volume.policy.desired_mount_point = 'SU1000.001'
>  volume.policy.mount_filesystem = 'iso9660'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_label_SU1000_001'
>  info.product = 'SU1000.001'
>  volume.disc.is_svcd = false
>  volume.disc.is_vcd = false
>  volume.disc.is_videodvd = false
>  volume.disc.is_rewritable = false
>  volume.disc.is_appendable = false
>  volume.disc.is_blank = false
>  volume.disc.has_data = true
>  volume.disc.has_audio = false
>  volume.disc.type = 'cd_rom'
>  volume.size = 672645120ull (0x2817c000ull)
>  volume.num_blocks = 1313760 (0x140be0)
>  volume.block_size = 2048 (0x800)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = true
>  volume.is_mounted = true
>  volume.mount_point = '/media/cdrom'
>  volume.label = 'SU1000.001'
>  volume.uuid = ''
>  volume.fsversion = ''
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'iso9660'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CD_224E'
>  block.is_volume = true
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_model_CD_224E'
>  linux.sysfs_path_device = '/sys/block/hda/fakevolume'
>  linux.sysfs_path = '/sys/block/hda/fakevolume'
>
>  1: udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/power/PWRF'
>
>  2: udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/power/PWRB'
>
>  3: udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  linux.hotplug_type = 4 (0x4)
>  processor.can_throttle = true
>  processor.number = 0 (0x0)
>  info.capabilities = { 'processor' }
>  info.category = 'processor'
>  info.product = 'Processor'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 1 (0x1)
>  linux.acpi_path = '/proc/acpi/processor/CPU0'
>
>  4: udi = '/org/freedesktop/Hal/devices/volume_part1_size_1077479424'
>  info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_1077479424'
>  volume.partition.msdos_part_table_type = 130 (0x82)
>  info.product = 'Volume (swap)'
>  volume.size = 1077479424ull (0x40390800ull)
>  volume.num_blocks = 2104452 (0x201c84)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 1 (0x1)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = ''
>  volume.fsversion = '2'
>  volume.fsusage = 'other'
>  volume.fstype = 'swap'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Y4D64XZE'
>  block.is_volume = true
>  block.minor = 1 (0x1)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda1'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_Y4D64XZE'
>  linux.sysfs_path_device = '/sys/block/sda/sda1'
>  linux.sysfs_path = '/sys/block/sda/sda1'
>
>  5: udi = '/org/freedesktop/Hal/devices/volume_uuid_8957fb2f_0c76_470d_8237_55d7278cc220'
>  volume.policy.desired_mount_point = 'scsidisk'
>  volume.policy.mount_filesystem = 'reiserfs'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_8957fb2f_0c76_470d_8237_55d7278cc220'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (reiserfs)'
>  volume.size = 158961761280ull (0x2502dbfc00ull)
>  volume.num_blocks = 310472190 (0x12816dfe)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 2 (0x2)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = true
>  volume.mount_point = '/'
>  volume.label = ''
>  volume.uuid = '8957fb2f-0c76-470d-8237-55d7278cc220'
>  volume.fsversion = '3.6'
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'reiserfs'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Y4D64XZE'
>  block.is_volume = true
>  block.minor = 2 (0x2)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda2'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_Y4D64XZE'
>  linux.sysfs_path_device = '/sys/block/sda/sda2'
>  linux.sysfs_path = '/sys/block/sda/sda2'
>
>  6: udi = '/org/freedesktop/Hal/devices/storage_serial_Y4D64XZE'
>  storage.policy.should_mount = false
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Y4D64XZE'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_Y4D64XZE'
>  storage.serial = 'Y4D64XZE'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  info.product = 'Maxtor 6Y160M0'
>  info.vendor = 'ATA'
>  storage.removable = false
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host_0_scsi_device_lun0'
>  storage.lun = 0 (0x0)
>  storage.drive_type = 'disk'
>  storage.vendor = 'ATA'
>  storage.model = 'Maxtor 6Y160M0'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = false
>  storage.bus = 'scsi'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host_0_scsi_device_lun0'
>  linux.sysfs_path_device = '/sys/block/sda'
>  linux.sysfs_path = '/sys/block/sda'
>
>  7: udi = '/org/freedesktop/Hal/devices/storage_serial_Y4D64XWE'
>  storage.policy.should_mount = false
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_Y4D64XWE'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_Y4D64XWE'
>  storage.serial = 'Y4D64XWE'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  info.product = 'Maxtor 6Y160M0'
>  info.vendor = 'ATA'
>  storage.removable = false
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host_scsi_device_lun0'
>  storage.lun = 0 (0x0)
>  storage.drive_type = 'disk'
>  storage.vendor = 'ATA'
>  storage.model = 'Maxtor 6Y160M0'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = false
>  storage.bus = 'scsi'
>  block.is_volume = false
>  block.minor = 16 (0x10)
>  block.major = 8 (0x8)
>  block.device = '/dev/sdb'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host_scsi_device_lun0'
>  linux.sysfs_path_device = '/sys/block/sdb'
>  linux.sysfs_path = '/sys/block/sdb'
>
>  8: udi = '/org/freedesktop/Hal/devices/storage_model_CD_224E'
>  info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' }
>  resmgr.class = 'cdrom'
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' }
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrom'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_CD_224E'
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_CD_224E'
>  storage.cdrom.write_speed = 0 (0x0)
>  storage.cdrom.read_speed = 4234 (0x108a)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = false
>  storage.cdrom.dvdplusrw = false
>  storage.cdrom.dvdplusr = false
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = false
>  storage.cdrom.dvd = false
>  storage.cdrom.cdrw = false
>  storage.cdrom.cdr = false
>  storage.firmware_version = '2.9B'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'CD-224E'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_25a2_ide_0_0'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'CD-224E'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a2_ide_0_0'
>  linux.sysfs_path_device = '/sys/block/hda'
>  linux.sysfs_path = '/sys/block/hda'
>
>  9: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'input'
>  resmgr.device = '/dev/input/event2'
>  input.product = 'PS/2 Generic Mouse'
>  info.product = 'PS/2 Generic Mouse'
>  linux.device_file = '/dev/input/event2'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event2'
>  info.capabilities = { 'input', 'input.mouse' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  linux.sysfs_path = '/sys/class/input/event2'
>
>  10: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux Port'
>  serio.description = 'i8042 Aux Port'
>  serio.id = 'serio0'
>  info.linux.driver = 'psmouse'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
>
>  11: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input'
>  input.product = 'AT Translated Set 2 keyboard'
>  info.product = 'AT Translated Set 2 keyboard'
>  linux.device_file = '/dev/input/event1'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event1'
>  info.capabilities = { 'input', 'input.keyboard' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.sysfs_path = '/sys/class/input/event1'
>
>  12: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Kbd Port'
>  serio.description = 'i8042 Kbd Port'
>  serio.id = 'serio1'
>  info.linux.driver = 'atkbd'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
>
>  13: udi = '/org/freedesktop/Hal/devices/pci_8086_2578'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2578'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02ad)'
>  pci.subsys_vendor = 'IBM'
>  info.product = '82875P/E7210 Memory Controller Hub'
>  pci.product = '82875P/E7210 Memory Controller Hub'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 685 (0x2ad)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9592 (0x2578)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>
>  14: udi = '/org/freedesktop/Hal/devices/net_00_11_25_ab_41_44'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_11_25_ab_41_44'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 73646424388ull (0x1125ab4144ull)
>  info.product = 'Networking Interface'
>  net.interface_up = true
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 4 (0x4)
>  net.address = '00:11:25:ab:41:44'
>  net.interface = 'eth0'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_1075'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_1075'
>  linux.sysfs_path = '/sys/class/net/eth0'
>
>  15: udi = '/org/freedesktop/Hal/devices/pci_8086_1075'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_1075'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02ae)'
>  pci.subsys_vendor = 'IBM'
>  info.product = '82547GI Gigabit Ethernet Controller'
>  pci.product = '82547GI Gigabit Ethernet Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 686 (0x2ae)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 4213 (0x1075)
>  info.linux.driver = 'e1000'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:02:01.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_257b'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/0000:02:01.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/0000:02:01.0'
>
>  16: udi = '/org/freedesktop/Hal/devices/pci_8086_257b'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_257b'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82875P/E7210 Processor to PCI to CSA Bridge'
>  pci.product = '82875P/E7210 Processor to PCI to CSA Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9595 (0x257b)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'
>
>  17: udi = '/org/freedesktop/Hal/devices/pci_8086_25ae'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25ae'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '6300ESB 64-bit PCI-X Bridge'
>  pci.product = '6300ESB 64-bit PCI-X Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9646 (0x25ae)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'
>
>  18: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-9-xen uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.0'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>
>  19: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.0'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-9-xen uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-9-xen uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a9'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>
>  20: udi = '/org/freedesktop/Hal/devices/pci_8086_25a9'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a9'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02ae)'
>  pci.subsys_vendor = 'IBM'
>  info.product = '6300ESB USB Universal Host Controller'
>  pci.product = '6300ESB USB Universal Host Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 686 (0x2ae)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9641 (0x25a9)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
>
>  21: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-9-xen uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.1'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'
>
>  22: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.1'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-9-xen uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-9-xen uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25aa'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'
>
>  23: udi = '/org/freedesktop/Hal/devices/pci_8086_25aa'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25aa'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02ae)'
>  pci.subsys_vendor = 'IBM'
>  info.product = '6300ESB USB Universal Host Controller'
>  pci.product = '6300ESB USB Universal Host Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 686 (0x2ae)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9642 (0x25aa)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'
>
>  24: udi = '/org/freedesktop/Hal/devices/pci_8086_25ab'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25ab'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02ae)'
>  pci.subsys_vendor = 'IBM'
>  info.product = '6300ESB Watchdog Timer'
>  pci.product = '6300ESB Watchdog Timer'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 128 (0x80)
>  pci.device_class = 8 (0x8)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 686 (0x2ae)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9643 (0x25ab)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.4'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.4'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.4'
>
>  25: udi = '/org/freedesktop/Hal/devices/pci_8086_25ac'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25ac'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02ae)'
>  pci.subsys_vendor = 'IBM'
>  info.product = '6300ESB I/O Advanced Programmable Interrupt Controller'
>  pci.product = '6300ESB I/O Advanced Programmable Interrupt Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 32 (0x20)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 8 (0x8)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 686 (0x2ae)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9644 (0x25ac)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.5'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.5'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.5'
>
>  26: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb3/3-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 1 (0x1)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-9-xen ehci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 4 (0x4)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.7'
>  usb.speed_bcd = 294912 (0x48000)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 3 (0x3)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb3/3-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb3/3-0:1.0'
>
>  27: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 3 (0x3)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 512 (0x200)
>  usb_device.speed_bcd = 294912 (0x48000)
>  usb_device.serial = '0000:00:1d.7'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 4 (0x4)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'EHCI Host Controller'
>  usb_device.product = 'EHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-9-xen ehci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-9-xen ehci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 1 (0x1)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb3'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25ad'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb3'
>
>  28: udi = '/org/freedesktop/Hal/devices/pci_8086_25ad'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25ad'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02ae)'
>  pci.subsys_vendor = 'IBM'
>  info.product = '6300ESB USB2 Enhanced Host Controller'
>  pci.product = '6300ESB USB2 Enhanced Host Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 32 (0x20)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 686 (0x2ae)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9645 (0x25ad)
>  info.linux.driver = 'ehci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'
>
>  29: udi = '/org/freedesktop/Hal/devices/pci_1002_5159'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1002_5159'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02c8)'
>  pci.subsys_vendor = 'IBM'
>  info.product = 'Radeon RV100 QY [Radeon 7000/VE]'
>  pci.product = 'Radeon RV100 QY [Radeon 7000/VE]'
>  info.vendor = 'ATI Technologies Inc'
>  pci.vendor = 'ATI Technologies Inc'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 3 (0x3)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 712 (0x2c8)
>  pci.vendor_id = 4098 (0x1002)
>  pci.product_id = 20825 (0x5159)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:02.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:02.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:02.0'
>
>  30: udi = '/org/freedesktop/Hal/devices/net_00_11_25_ab_41_45'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_11_25_ab_41_45'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 73646424389ull (0x1125ab4145ull)
>  info.product = 'Networking Interface'
>  net.interface_up = false
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 5 (0x5)
>  net.address = '00:11:25:ab:41:45'
>  net.interface = 'eth1'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_1076'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_1076'
>  linux.sysfs_path = '/sys/class/net/eth1'
>
>  31: udi = '/org/freedesktop/Hal/devices/pci_8086_1076'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_1076'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02ae)'
>  pci.subsys_vendor = 'IBM'
>  info.product = '82541GI/PI Gigabit Ethernet Controller'
>  pci.product = '82541GI/PI Gigabit Ethernet Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 686 (0x2ae)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 4214 (0x1076)
>  info.linux.driver = 'e1000'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:03.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_244e'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:03.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:03.0'
>
>  32: udi = '/org/freedesktop/Hal/devices/pci_8086_244e'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_244e'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801 PCI Bridge'
>  pci.product = '82801 PCI Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9294 (0x244e)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>
>  33: udi = '/org/freedesktop/Hal/devices/pci_8086_25a1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a1'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '6300ESB LPC Interface Controller'
>  pci.product = '6300ESB LPC Interface Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9633 (0x25a1)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
>
>  34: udi = '/org/freedesktop/Hal/devices/pci_8086_25a2_ide_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a2_ide_0_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25a2'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
>
>  35: udi = '/org/freedesktop/Hal/devices/pci_8086_25a2'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a2'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02ae)'
>  pci.subsys_vendor = 'IBM'
>  info.product = '6300ESB PATA Storage Controller'
>  pci.product = '6300ESB PATA Storage Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 138 (0x8a)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 686 (0x2ae)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9634 (0x25a2)
>  info.linux.driver = 'PIIX_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
>
>  36: udi = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host_0_scsi_device_lun0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host_0_scsi_device_lun0'
>  linux.subsystem = 'scsi'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'SCSI Device'
>  info.linux.driver = 'sd'
>  scsi.lun = 0 (0x0)
>  scsi.target = 0 (0x0)
>  scsi.bus = 0 (0x0)
>  scsi.host = 0 (0x0)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host_0'
>  info.bus = 'scsi'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0'
>
>  37: udi = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host_0'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 0 (0x0)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25b0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/host0'
>  linux.sysfs_path = '/sys/class/scsi_host/host0'
>
>  38: udi = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host_scsi_device_lun0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host_scsi_device_lun0'
>  linux.subsystem = 'scsi'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'SCSI Device'
>  info.linux.driver = 'sd'
>  scsi.lun = 0 (0x0)
>  scsi.target = 0 (0x0)
>  scsi.bus = 0 (0x0)
>  scsi.host = 1 (0x1)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host'
>  info.bus = 'scsi'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0'
>
>  39: udi = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25b0_scsi_host'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 1 (0x1)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_25b0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/host1'
>  linux.sysfs_path = '/sys/class/scsi_host/host1'
>
>  40: udi = '/org/freedesktop/Hal/devices/pci_8086_25b0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25b0'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02ae)'
>  pci.subsys_vendor = 'IBM'
>  info.product = '6300ESB SATA RAID Controller'
>  pci.product = '6300ESB SATA RAID Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 143 (0x8f)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 686 (0x2ae)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9648 (0x25b0)
>  info.linux.driver = 'ata_piix'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2'
>
>  41: udi = '/org/freedesktop/Hal/devices/pci_8086_25a4'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_25a4'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x02ae)'
>  pci.subsys_vendor = 'IBM'
>  info.product = '6300ESB SMBus Controller'
>  pci.product = '6300ESB SMBus Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 5 (0x5)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4116 (0x1014)
>  pci.subsys_product_id = 686 (0x2ae)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9636 (0x25a4)
>  info.linux.driver = 'i801_smbus'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'
>
>  42: udi = '/org/freedesktop/Hal/devices/pnp_ASF0001'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_ASF0001'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PnP Device (ASF0001)'
>  pnp.id = 'ASF0001'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:00'
>  linux.sysfs_path = '/sys/devices/pnp0/00:00'
>
>  43: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:01'
>  linux.sysfs_path = '/sys/devices/pnp0/00:01'
>
>  44: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT DMA Controller'
>  pnp.description = 'AT DMA Controller'
>  pnp.id = 'PNP0200'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:02'
>  linux.sysfs_path = '/sys/devices/pnp0/00:02'
>
>  45: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Math Coprocessor'
>  pnp.description = 'Math Coprocessor'
>  pnp.id = 'PNP0c04'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:03'
>  linux.sysfs_path = '/sys/devices/pnp0/00:03'
>
>  46: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT Real-Time Clock'
>  pnp.description = 'AT Real-Time Clock'
>  pnp.id = 'PNP0b00'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:04'
>  linux.sysfs_path = '/sys/devices/pnp0/00:04'
>
>  47: udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT-style speaker sound'
>  pnp.description = 'AT-style speaker sound'
>  pnp.id = 'PNP0800'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:05'
>  linux.sysfs_path = '/sys/devices/pnp0/00:05'
>
>  48: udi = '/org/freedesktop/Hal/devices/pnp_INT0800'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PnP Device (INT0800)'
>  pnp.id = 'INT0800'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:06'
>  linux.sysfs_path = '/sys/devices/pnp0/00:06'
>
>  49: udi = '/org/freedesktop/Hal/devices/pnp_IBM37d7'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_IBM37d7'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PnP Device (IBM37d7)'
>  pnp.id = 'IBM37d7'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:07'
>  linux.sysfs_path = '/sys/devices/pnp0/00:07'
>
>  50: udi = '/org/freedesktop/Hal/devices/pnp_PNP0a05'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a05'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Generic ACPI Bus'
>  pnp.description = 'Generic ACPI Bus'
>  pnp.id = 'PNP0a05'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:08'
>  linux.sysfs_path = '/sys/devices/pnp0/00:08'
>
>  51: udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PC standard floppy disk controller'
>  pnp.description = 'PC standard floppy disk controller'
>  pnp.id = 'PNP0700'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:09'
>  linux.sysfs_path = '/sys/devices/pnp0/00:09'
>
>  52: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'modem'
>  resmgr.device = '/dev/ttyS0'
>  linux.device_file = '/dev/ttyS0'
>  linux.subsystem = 'tty'
>  linux.hotplug_type = 2 (0x2)
>  info.product = '16550A-compatible COM port'
>  serial.type = 'platform'
>  serial.port = 0 (0x0)
>  serial.device = '/dev/ttyS0'
>  serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.capabilities = { 'serial' }
>  info.category = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.sysfs_path = '/sys/class/tty/ttyS0'
>
>  53: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = '16550A-compatible COM port'
>  pnp.description = '16550A-compatible COM port'
>  pnp.id = 'PNP0501'
>  info.linux.driver = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0a'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0a'
>
>  54: udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.id = 'PNP0303'
>  info.linux.driver = 'i8042 kbd'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0b'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0b'
>
>  55: udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PS/2 Port for PS/2-style Mice'
>  pnp.description = 'PS/2 Port for PS/2-style Mice'
>  pnp.id = 'PNP0f13'
>  info.linux.driver = 'i8042 aux'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0c'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0c'
>
>  56: udi = '/org/freedesktop/Hal/devices/computer'
>  storage.policy.default.mount_option.exec = true
>  storage.policy.default.mount_option.pamconsole = true
>  storage.policy.default.mount_option.noauto = true
>  storage.policy.default.managed_keyword.secondary = 'kudzu'
>  storage.policy.default.managed_keyword.primary = 'managed'
>  storage.policy.default.use_managed_keyword = true
>  storage.policy.default.mount_root = '/media'
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-set-power-save' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', 'b' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'SetPowerSave' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
>  info.addons = { 'hald-addon-acpi' }
>  system.product = '-[84894TY]- IBM CORPORATION'
>  system.vendor = 'IBM CORPORATION'
>  smbios.chassis.type = 'Other'
>  smbios.chassis.manufacturer = 'IBM'
>  smbios.system.uuid = '8026C3F6-3D64-0010-BF4A-E8C4515F2458'
>  smbios.system.serial = 'KDTMY88'
>  smbios.system.version = 'IBM CORPORATION'
>  smbios.system.product = '-[84894TY]-'
>  smbios.system.manufacturer = 'IBM CORPORATION'
>  smbios.bios.release_date = '06/16/2005'
>  smbios.bios.version = '-[KEE134AUS-1.34]-'
>  smbios.bios.vendor = 'IBM'
>  power_management.acpi.linux.version = '20050408'
>  power_management.type = 'acpi'
>  power_management.is_enabled = true
>  system.formfactor = 'unknown'
>  system.kernel.machine = 'x86_64'
>  system.kernel.version = '2.6.13-9-xen'
>  system.kernel.name = 'Linux'
>  info.udi = '/org/freedesktop/Hal/devices/computer'
>  info.product = 'Computer'
>  linux.sysfs_path_device = '(none)'
>  info.bus = 'unknown'
>----- hal device list end -----
>>> floppy.1: get nvram
>----- /proc/nvram -----
>  Checksum status: valid
>  # floppies     : 1
>  Floppy 0 type  : 3.5'' 1.44M
>  Floppy 1 type  : none
>  HD 0 type      : none
>  HD 1 type      : none
>  HD type 48 data: 6691/235/34 C/H/S, precomp 4867, lz 80
>  HD type 49 data: 43013/0/6 C/H/S, precomp 12672, lz 26965
>  DOS base memory: 624 kB
>  Extended memory: 64512 kB (configured), 64512 kB (tested)
>  Gfx adapter    : EGA, VGA, ... (with BIOS)
>  FPU            : installed
>----- /proc/nvram end -----
>>> floppy.2: nvram info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>/dev/mem[0x400, 256]: mmap(, 4096,,,, 0x0) ok
>/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok
>  bios: 2 disks
>  bios: 615k low mem
>/dev/mem[0x99c00, 1]: mmap(, 4096,,,, 0x99000) ok
>/dev/mem[0x99c00, 9216]: mmap(, 12288,,,, 0x99000) ok
>  bios: EBDA 0x02400 bytes at 0x99c00
>>> bios.2: rom
>----- SMBIOS Entry Point 0xf6110 - 0xf612e -----
>  f6110  5f 53 4d 5f 0b 1f 02 21 55 00 00 00 00 00 00 00  "_SM_...!U......."
>  f6120  5f 44 4d 49 5f f7 98 05 00 70 f7 3f 2e 00 00  "_DMI_....p.?..."
>----- SMBIOS Entry Point end -----
>/dev/mem[0x3ff77000, 1432]: mmap(, 4096,,,, 0x3ff77000) ok
>----- SMBIOS Structure Table 0x3ff77000 - 0x3ff77597 -----
>  3ff77000  00 14 00 00 01 02 f0 e0 03 0f 90 da cb 7f 00 00  "................"
>  3ff77010  00 00 82 01 49 42 4d 00 2d 5b 4b 45 45 31 33 34  "....IBM.-[KEE134"
>  3ff77020  41 55 53 2d 31 2e 33 34 5d 2d 00 30 36 2f 31 36  "AUS-1.34]-.06/16"
>  3ff77030  2f 32 30 30 35 00 00 01 19 01 00 01 02 03 04 80  "/2005..........."
>  3ff77040  26 c3 f6 3d 64 00 10 bf 4a e8 c4 51 5f 24 58 06  "&..=d...J..Q_$X."
>  3ff77050  49 42 4d 20 43 4f 52 50 4f 52 41 54 49 4f 4e 00  "IBM CORPORATION."
>  3ff77060  2d 5b 38 34 38 39 34 54 59 5d 2d 00 49 42 4d 20  "-[84894TY]-.IBM "
>  3ff77070  43 4f 52 50 4f 52 41 54 49 4f 4e 00 4b 44 54 4d  "CORPORATION.KDTM"
>  3ff77080  59 38 38 00 00 02 08 02 00 01 02 03 04 49 42 4d  "Y88..........IBM"
>  3ff77090  00 4d 37 31 49 58 00 2d 31 00 4a 31 4e 4b 57 32  ".M71IX.-1.J1NKW2"
>  3ff770a0  37 50 31 30 47 00 00 03 11 03 00 01 01 02 03 04  "7P10G..........."
>  3ff770b0  03 03 03 03 34 12 00 00 49 42 4d 00 4e 2f 41 00  "....4...IBM.N/A."
>  3ff770c0  31 32 33 34 35 36 00 49 6e 67 65 6e 69 74 6f 72  "123456.Ingenitor"
>  3ff770d0  20 53 79 73 74 65 6d 73 20 30 39 30 39 30 35 18  " Systems 090905."
>  3ff770e0  00 00 04 23 04 00 01 03 b2 02 41 0f 00 00 ff fb  "...#......A....."
>  3ff770f0  eb bf 03 92 c8 00 48 0d 80 0c 41 08 0a 00 0b 00  "......H...A....."
>  3ff77100  ff ff 00 00 00 57 4d 54 34 37 38 2f 4e 57 44 00  ".....WMT478/NWD."
>  3ff77110  49 6e 74 65 6c 00 45 30 00 00 05 16 05 00 03 04  "Intel.E0........"
>  3ff77120  03 03 08 0c 00 18 05 02 03 06 00 07 00 08 00 04  "................"
>  3ff77130  00 00 06 0c 06 00 01 01 00 40 05 89 89 04 44 49  ".........@....DI"
>  3ff77140  4d 4d 30 00 00 06 0c 07 00 01 23 00 40 05 89 89  "MM0.......#.@..."
>  3ff77150  04 44 49 4d 4d 31 00 00 06 0c 08 00 01 45 00 40  ".DIMM1.......E.@"
>  3ff77160  05 7f 7f 04 44 49 4d 4d 32 00 00 06 0c 09 00 01  "....DIMM2......."
>  3ff77170  67 00 40 05 7f 7f 04 44 49 4d 4d 33 00 00 07 13  "g.@....DIMM3...."
>  3ff77180  0a 00 01 80 00 20 00 10 00 58 00 40 00 00 04 04  "..... ...X.@...."
>  3ff77190  05 4c 31 20 43 61 63 68 65 00 00 07 13 0b 00 01  ".L1 Cache......."
>  3ff771a0  81 01 00 04 00 04 58 00 08 00 00 02 02 02 4c 32  "......X.......L2"
>  3ff771b0  20 43 61 63 68 65 00 00 08 09 0c 00 01 18 02 08  " Cache.........."
>  3ff771c0  09 4a 32 41 31 00 43 4f 4d 20 31 00 00 08 09 0d  ".J2A1.COM 1....."
>  3ff771d0  00 01 19 02 05 05 4a 33 41 31 00 50 61 72 61 6c  "......J3A1.Paral"
>  3ff771e0  6c 65 6c 00 00 08 09 0e 00 01 00 02 14 0d 4a 31  "lel...........J1"
>  3ff771f0  41 31 00 4b 65 79 62 6f 61 72 64 00 00 08 09 0f  "A1.Keyboard....."
>  3ff77200  00 01 00 02 14 0d 4a 31 41 31 00 50 53 2f 32 20  "......J1A1.PS/2 "
>  3ff77210  4d 6f 75 73 65 00 00 09 0d 10 00 01 06 05 03 04  "Mouse..........."
>  3ff77220  01 00 06 00 50 43 49 20 53 6c 6f 74 20 23 31 20  "....PCI Slot #1 "
>  3ff77230  2d 20 4a 36 42 33 00 00 09 0d 11 00 01 06 05 03  "- J6B3.........."
>  3ff77240  04 02 00 06 00 50 43 49 20 53 6c 6f 74 20 23 32  ".....PCI Slot #2"
>  3ff77250  20 2d 20 4a 36 42 32 00 00 09 0d 12 00 01 06 05  " - J6B2........."
>  3ff77260  03 04 03 00 06 00 50 43 49 20 53 6c 6f 74 20 23  "......PCI Slot #"
>  3ff77270  33 20 2d 20 4a 37 42 31 00 00 09 0d 13 00 01 06  "3 - J7B1........"
>  3ff77280  05 03 04 04 00 06 00 50 43 49 20 53 6c 6f 74 20  ".......PCI Slot "
>  3ff77290  23 34 20 2d 20 4a 37 42 31 00 00 09 0d 14 00 01  "#4 - J7B1......."
>  3ff772a0  06 05 03 04 05 00 06 00 50 43 49 20 53 6c 6f 74  "........PCI Slot"
>  3ff772b0  20 23 35 20 2d 20 4a 37 42 31 00 00 0a 0e 15 00  " #5 - J7B1......"
>  3ff772c0  85 01 85 02 84 03 83 04 81 05 38 32 35 34 37 00  "..........82547."
>  3ff772d0  38 32 35 34 31 00 37 39 30 31 00 41 54 49 00 49  "82541.7901.ATI.I"
>  3ff772e0  42 4d 20 41 75 74 6f 6d 61 74 69 63 20 53 65 72  "BM Automatic Ser"
>  3ff772f0  76 65 72 20 52 65 73 74 61 72 74 20 2d 20 4d 61  "ver Restart - Ma"
>  3ff77300  63 68 69 6e 65 20 54 79 70 65 20 38 34 38 32 00  "chine Type 8482."
>  3ff77310  00 0b 05 16 00 02 54 68 69 73 20 69 73 20 74 68  "......This is th"
>  3ff77320  65 20 49 6e 74 65 6c 20 4e 42 56 56 2d 47 00 53  "e Intel NBVV-G.S"
>  3ff77330  79 73 74 65 6d 20 56 61 6c 69 64 61 74 69 6f 6e  "ystem Validation"
>  3ff77340  20 50 6c 61 74 66 6f 72 6d 00 00 0c 05 17 00 01  " Platform......."
>  3ff77350  4a 75 6d 70 65 72 20 73 65 74 74 69 6e 67 73 20  "Jumper settings "
>  3ff77360  63 61 6e 20 62 65 20 64 65 73 63 72 69 62 65 64  "can be described"
>  3ff77370  20 68 65 72 65 2e 00 00 0f 1d 18 00 10 00 00 00  " here..........."
>  3ff77380  10 00 04 01 09 00 00 00 00 00 00 00 01 03 02 08  "................"
>  3ff77390  04 01 02 02 02 00 00 10 0f 19 00 03 03 05 00 00  "................"
>  3ff773a0  40 00 fe ff 04 00 00 00 11 1b 1a 00 19 00 ff ff  "@..............."
>  3ff773b0  48 00 40 00 00 02 09 01 01 02 12 80 00 85 00 00  "H.@............."
>  3ff773c0  00 00 00 4a 35 47 32 00 44 49 4d 4d 20 30 00 00  "...J5G2.DIMM 0.."
>  3ff773d0  11 1b 1b 00 19 00 ff ff 48 00 40 00 00 02 09 01  "........H.@....."
>  3ff773e0  01 02 12 80 00 85 00 00 00 00 00 4a 35 47 33 00  "...........J5G3."
>  3ff773f0  44 49 4d 4d 20 31 00 00 11 1b 1c 00 19 00 ff ff  "DIMM 1.........."
>  3ff77400  00 00 00 00 00 00 09 01 01 02 12 80 00 85 00 00  "................"
>  3ff77410  00 00 00 4a 35 48 31 00 44 49 4d 4d 20 32 00 00  "...J5H1.DIMM 2.."
>  3ff77420  11 1b 1d 00 19 00 ff ff 00 00 00 00 00 00 09 01  "................"
>  3ff77430  01 02 12 80 00 85 00 00 00 00 00 4a 35 48 32 00  "...........J5H2."
>  3ff77440  44 49 4d 4d 20 33 00 00 13 0f 1e 00 00 00 00 00  "DIMM 3.........."
>  3ff77450  ff ff 0f 00 19 00 02 00 00 14 13 1f 00 00 00 00  "................"
>  3ff77460  00 ff ff 07 00 1a 00 1e 00 ff ff ff 00 00 14 13  "................"
>  3ff77470  20 00 00 00 08 00 ff ff 0f 00 1b 00 1e 00 ff ff  " ..............."
>  3ff77480  ff 00 00 17 0d 21 00 3f ff ff ff ff ff ff ff ff  ".....!.?........"
>  3ff77490  00 00 18 05 22 00 37 00 00 19 09 23 00 12 31 23  "....".7....#..1#"
>  3ff774a0  59 59 00 00 1a 14 24 00 01 63 00 80 00 80 00 80  "YY....$..c......"
>  3ff774b0  00 80 00 80 00 00 00 00 56 6f 6c 74 61 67 65 20  "........Voltage "
>  3ff774c0  50 72 6f 62 65 00 00 1b 0c 25 00 26 00 63 00 00  "Probe....%.&.c.."
>  3ff774d0  00 00 00 00 00 1c 14 26 00 01 63 00 80 00 80 00  ".......&..c....."
>  3ff774e0  80 00 80 00 80 00 00 00 00 54 65 6d 70 65 72 61  ".........Tempera"
>  3ff774f0  74 75 72 65 20 50 72 6f 62 65 00 00 1d 14 27 00  "ture Probe....'."
>  3ff77500  01 63 00 80 00 80 00 80 00 80 00 80 00 00 00 00  ".c.............."
>  3ff77510  45 6c 65 63 74 72 69 63 61 6c 20 43 75 72 72 65  "Electrical Curre"
>  3ff77520  6e 74 20 50 72 6f 62 65 00 00 1e 06 28 00 01 01  "nt Probe....(..."
>  3ff77530  49 6e 74 65 6c 00 00 20 14 29 00 00 00 00 00 00  "Intel.. .)......"
>  3ff77540  00 0c 01 02 03 04 05 06 07 08 09 00 00 7e 04 2a  ".............~.*"
>  3ff77550  00 00 00 81 1c 2b 00 01 01 02 01 00 00 00 01 00  ".....+.........."
>  3ff77560  00 18 01 00 02 08 01 00 00 e0 01 01 03 10 01 49  "...............I"
>  3ff77570  6e 74 65 6c 5f 41 53 46 5f 30 30 31 00 49 6e 74  "ntel_ASF_001.Int"
>  3ff77580  65 6c 5f 41 53 46 5f 30 30 31 00 00 7f 04 2c 00  "el_ASF_001....,."
>  3ff77590  00 00 7f 04 2d 00 00 00  "....-..."
>----- SMBIOS Structure Table end -----
>  type 0x00 [0x0000]: 00 14 00 00 01 02 f0 e0 03 0f 90 da cb 7f 00 00 00 00 82 01
>       str1: "IBM"
>       str2: "-[KEE134AUS-1.34]-"
>       str3: "06/16/2005"
>  type 0x01 [0x0001]: 01 19 01 00 01 02 03 04 80 26 c3 f6 3d 64 00 10 bf 4a e8 c4 51 5f 24 58 06
>       str1: "IBM CORPORATION"
>       str2: "-[84894TY]-"
>       str3: "IBM CORPORATION"
>       str4: "KDTMY88"
>  type 0x02 [0x0002]: 02 08 02 00 01 02 03 04
>       str1: "IBM"
>       str2: "M71IX"
>       str3: "-1"
>       str4: "J1NKW27P10G"
>  type 0x03 [0x0003]: 03 11 03 00 01 01 02 03 04 03 03 03 03 34 12 00 00
>       str1: "IBM"
>       str2: "N/A"
>       str3: "123456"
>       str4: "Ingenitor Systems 090905"
>  type 0x04 [0x0004]: 04 23 04 00 01 03 b2 02 41 0f 00 00 ff fb eb bf 03 92 c8 00 48 0d 80 0c 41 08 0a 00 0b 00 ff ff 00 00 00
>       str1: "WMT478/NWD"
>       str2: "Intel"
>       str3: "E0"
>  type 0x05 [0x0005]: 05 16 05 00 03 04 03 03 08 0c 00 18 05 02 03 06 00 07 00 08 00 04
>  type 0x06 [0x0006]: 06 0c 06 00 01 01 00 40 05 89 89 04
>       str1: "DIMM0"
>  type 0x06 [0x0007]: 06 0c 07 00 01 23 00 40 05 89 89 04
>       str1: "DIMM1"
>  type 0x06 [0x0008]: 06 0c 08 00 01 45 00 40 05 7f 7f 04
>       str1: "DIMM2"
>  type 0x06 [0x0009]: 06 0c 09 00 01 67 00 40 05 7f 7f 04
>       str1: "DIMM3"
>  type 0x07 [0x000a]: 07 13 0a 00 01 80 00 20 00 10 00 58 00 40 00 00 04 04 05
>       str1: "L1 Cache"
>  type 0x07 [0x000b]: 07 13 0b 00 01 81 01 00 04 00 04 58 00 08 00 00 02 02 02
>       str1: "L2 Cache"
>  type 0x08 [0x000c]: 08 09 0c 00 01 18 02 08 09
>       str1: "J2A1"
>       str2: "COM 1"
>  type 0x08 [0x000d]: 08 09 0d 00 01 19 02 05 05
>       str1: "J3A1"
>       str2: "Parallel"
>  type 0x08 [0x000e]: 08 09 0e 00 01 00 02 14 0d
>       str1: "J1A1"
>       str2: "Keyboard"
>  type 0x08 [0x000f]: 08 09 0f 00 01 00 02 14 0d
>       str1: "J1A1"
>       str2: "PS/2 Mouse"
>  type 0x09 [0x0010]: 09 0d 10 00 01 06 05 03 04 01 00 06 00
>       str1: "PCI Slot #1 - J6B3"
>  type 0x09 [0x0011]: 09 0d 11 00 01 06 05 03 04 02 00 06 00
>       str1: "PCI Slot #2 - J6B2"
>  type 0x09 [0x0012]: 09 0d 12 00 01 06 05 03 04 03 00 06 00
>       str1: "PCI Slot #3 - J7B1"
>  type 0x09 [0x0013]: 09 0d 13 00 01 06 05 03 04 04 00 06 00
>       str1: "PCI Slot #4 - J7B1"
>  type 0x09 [0x0014]: 09 0d 14 00 01 06 05 03 04 05 00 06 00
>       str1: "PCI Slot #5 - J7B1"
>  type 0x0a [0x0015]: 0a 0e 15 00 85 01 85 02 84 03 83 04 81 05
>       str1: "82547"
>       str2: "82541"
>       str3: "7901"
>       str4: "ATI"
>       str5: "IBM Automatic Server Restart - Machine Type 8482"
>  type 0x0b [0x0016]: 0b 05 16 00 02
>       str1: "This is the Intel NBVV-G"
>       str2: "System Validation Platform"
>  type 0x0c [0x0017]: 0c 05 17 00 01
>       str1: "Jumper settings can be described here."
>  type 0x0f [0x0018]: 0f 1d 18 00 10 00 00 00 10 00 04 01 09 00 00 00 00 00 00 00 01 03 02 08 04 01 02 02 02
>  type 0x10 [0x0019]: 10 0f 19 00 03 03 05 00 00 40 00 fe ff 04 00
>  type 0x11 [0x001a]: 11 1b 1a 00 19 00 ff ff 48 00 40 00 00 02 09 01 01 02 12 80 00 85 00 00 00 00 00
>       str1: "J5G2"
>       str2: "DIMM 0"
>  type 0x11 [0x001b]: 11 1b 1b 00 19 00 ff ff 48 00 40 00 00 02 09 01 01 02 12 80 00 85 00 00 00 00 00
>       str1: "J5G3"
>       str2: "DIMM 1"
>  type 0x11 [0x001c]: 11 1b 1c 00 19 00 ff ff 00 00 00 00 00 00 09 01 01 02 12 80 00 85 00 00 00 00 00
>       str1: "J5H1"
>       str2: "DIMM 2"
>  type 0x11 [0x001d]: 11 1b 1d 00 19 00 ff ff 00 00 00 00 00 00 09 01 01 02 12 80 00 85 00 00 00 00 00
>       str1: "J5H2"
>       str2: "DIMM 3"
>  type 0x13 [0x001e]: 13 0f 1e 00 00 00 00 00 ff ff 0f 00 19 00 02
>  type 0x14 [0x001f]: 14 13 1f 00 00 00 00 00 ff ff 07 00 1a 00 1e 00 ff ff ff
>  type 0x14 [0x0020]: 14 13 20 00 00 00 08 00 ff ff 0f 00 1b 00 1e 00 ff ff ff
>  type 0x17 [0x0021]: 17 0d 21 00 3f ff ff ff ff ff ff ff ff
>  type 0x18 [0x0022]: 18 05 22 00 37
>  type 0x19 [0x0023]: 19 09 23 00 12 31 23 59 59
>  type 0x1a [0x0024]: 1a 14 24 00 01 63 00 80 00 80 00 80 00 80 00 80 00 00 00 00
>       str1: "Voltage Probe"
>  type 0x1b [0x0025]: 1b 0c 25 00 26 00 63 00 00 00 00 00
>  type 0x1c [0x0026]: 1c 14 26 00 01 63 00 80 00 80 00 80 00 80 00 80 00 00 00 00
>       str1: "Temperature Probe"
>  type 0x1d [0x0027]: 1d 14 27 00 01 63 00 80 00 80 00 80 00 80 00 80 00 00 00 00
>       str1: "Electrical Current Probe"
>  type 0x1e [0x0028]: 1e 06 28 00 01 01
>       str1: "Intel"
>  type 0x20 [0x0029]: 20 14 29 00 00 00 00 00 00 00 0c 01 02 03 04 05 06 07 08 09
>  type 0x7e [0x002a]: 7e 04 2a 00
>  type 0x81 [0x002b]: 81 1c 2b 00 01 01 02 01 00 00 00 01 00 00 18 01 00 02 08 01 00 00 e0 01 01 03 10 01
>       str1: "Intel_ASF_001"
>       str2: "Intel_ASF_001"
>  type 0x7f [0x002c]: 7f 04 2c 00
>  smbios: stopped at end tag
>>> bios.3: smp
>  smp: valid MP FP at 0xf6130 (size 0x10, rev 4), MP config at 0x9a170
>/dev/mem[0x9a170, 65536]: mmap(, 69632,,,, 0x9a000) ok
>  base MP config table (30 entries):
>  type 0, len 20
>    00 00 14 03 41 0f 00 00 ff fb eb bf 00 00 00 00 00 00 00 00  "....A..............."
>  type 1, len 8
>    01 00 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 01 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 02 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 03 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 04 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 05 49 53 41 20 20 20  "..ISA   "
>  type 2, len 8
>    02 02 20 01 00 00 c0 fe  ".. ....."
>  type 2, len 8
>    02 03 20 01 00 00 c1 fe  ".. ....."
>  type 3, len 8
>    03 03 05 00 05 00 02 00  "........"
>  type 3, len 8
>    03 00 05 00 05 01 02 01  "........"
>  type 3, len 8
>    03 00 05 00 05 00 02 02  "........"
>  type 3, len 8
>    03 00 0f 00 00 74 02 10  ".....t.."
>  type 3, len 8
>    03 00 05 00 05 04 02 04  "........"
>  type 3, len 8
>    03 00 0f 00 00 7c 02 12  ".....|.."
>  type 3, len 8
>    03 00 05 00 05 06 02 06  "........"
>  type 3, len 8
>    03 00 0f 00 00 77 02 17  ".....w.."
>  type 3, len 8
>    03 00 05 00 05 08 02 08  "........"
>  type 3, len 8
>    03 00 05 00 05 09 02 09  "........"
>  type 3, len 8
>    03 00 05 00 05 0a 02 0a  "........"
>  type 3, len 8
>    03 00 0f 00 00 75 02 13  ".....u.."
>  type 3, len 8
>    03 00 05 00 05 0c 02 0c  "........"
>  type 3, len 8
>    03 00 05 00 05 0d 02 0d  "........"
>  type 3, len 8
>    03 00 05 00 05 0e 02 0e  "........"
>  type 3, len 8
>    03 00 05 00 05 0f 02 0f  "........"
>  type 3, len 8
>    03 00 0f 00 00 7d 02 11  ".....}.."
>  type 3, len 8
>    03 00 0f 00 02 04 02 12  "........"
>  type 3, len 8
>    03 00 0f 00 04 0c 02 16  "........"
>  type 4, len 8
>    04 03 05 00 05 00 ff 00  "........"
>  type 4, len 8
>    04 01 05 00 05 00 ff 01  "........"
>  extended MP config table:
>  type 128, len 20
>    80 14 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00  "...................."
>  type 128, len 20
>    80 14 00 01 00 00 00 40 00 00 00 00 00 00 00 92 00 00 00 00  ".......@............"
>  type 128, len 20
>    80 14 00 02 00 00 00 d2 00 00 00 00 00 00 00 1e 00 00 00 00  "...................."
>  type 128, len 20
>    80 14 00 01 00 00 00 f0 00 00 00 00 00 00 e0 0e 00 00 00 00  "...................."
>  type 128, len 20
>    80 14 00 01 00 10 e0 fe 00 00 00 00 00 f0 1f 01 00 00 00 00  "...................."
>  type 128, len 20
>    80 14 04 01 00 00 0a 00 00 00 00 00 00 00 02 00 00 00 00 00  "...................."
>  type 128, len 20
>    80 14 04 01 00 00 0d 00 00 00 00 00 00 00 01 00 00 00 00 00  "...................."
>  type 129, len 8
>    81 08 05 01 00 00 00 00  "........"
>  type 130, len 8
>    82 08 00 00 00 00 00 00  "........"
>  type 130, len 8
>    82 08 00 00 01 00 00 00  "........"
>----- BIOS data 0x00400 - 0x004ff -----
>  400  f8 03 00 00 00 00 00 00 00 00 00 00 00 00 c0 99  "................"
>  410  27 02 00 67 02 2a 00 00 00 00 28 00 28 00 00 00  "'..g.*....(.(..."
>  420  e0 50 e0 50 e0 50 0d 1c 00 00 00 00 00 00 00 00  ".P.P.P.........."
>  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80  "................"
>  440  25 00 00 df 02 20 00 20 00 03 50 00 00 10 00 00  "%.... . ..P....."
>  450  00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  0c 0b 00 d4 03 29 30 00 00 00 00 00 00 00 00 00  ".....)0........."
>  470  00 00 00 00 00 02 00 00 14 14 14 00 01 01 01 01  "................"
>  480  1e 00 3e 00 18 10 00 60 f9 11 0b 81 00 00 00 04  "..>....`........"
>  490  01 00 00 00 00 00 10 00 f0 7b 00 00 a0 50 03 00  ".........{...P.."
>  4a0  00 00 00 00 00 00 00 00 1e 17 00 c0 00 00 00 00  "................"
>  4b0  00 00 00 00 00 00 dc 1d 00 00 00 00 00 00 00 00  "................"
>  4c0  40 01 00 00 40 04 f0 01 f6 03 a0 00 0e 00 05 04  "@...@..........."
>  4d0  03 09 00 00 10 44 04 00 00 00 00 00 00 00 00 00  ".....D.........."
>  4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- BIOS data end -----
>----- EBDA 0x99c00 - 0x9bfff -----
>  99c00  09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ac00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9bc00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- EBDA end -----
>/dev/mem[0xf6130, 16]: mmap(, 4096,,,, 0xf6000) ok
>----- MP FP 0xf6130 - 0xf613f -----
>  f6130  5f 4d 50 5f 70 a1 09 00 01 04 86 00 00 00 00 00  "_MP_p..........."
>----- MP FP end -----
>/dev/mem[0x9a170, 460]: mmap(, 4096,,,, 0x9a000) ok
>----- MP config table 0x9a170 - 0x9a33b -----
>  9a170  50 43 4d 50 28 01 04 b9 49 42 4d 20 20 20 20 20  "PCMP(...IBM     "
>  9a180  4a 2f 50 20 20 20 20 20 20 20 20 20 00 00 00 00  "J/P         ...."
>  9a190  00 00 1e 00 00 00 e0 fe a4 00 88 00 00 00 14 03  "................"
>  9a1a0  41 0f 00 00 ff fb eb bf 00 00 00 00 00 00 00 00  "A..............."
>  9a1b0  01 00 50 43 49 20 20 20 01 01 50 43 49 20 20 20  "..PCI   ..PCI   "
>  9a1c0  01 02 50 43 49 20 20 20 01 03 50 43 49 20 20 20  "..PCI   ..PCI   "
>  9a1d0  01 04 50 43 49 20 20 20 01 05 49 53 41 20 20 20  "..PCI   ..ISA   "
>  9a1e0  02 02 20 01 00 00 c0 fe 02 03 20 01 00 00 c1 fe  ".. ....... ....."
>  9a1f0  03 03 05 00 05 00 02 00 03 00 05 00 05 01 02 01  "................"
>  9a200  03 00 05 00 05 00 02 02 03 00 0f 00 00 74 02 10  ".............t.."
>  9a210  03 00 05 00 05 04 02 04 03 00 0f 00 00 7c 02 12  ".............|.."
>  9a220  03 00 05 00 05 06 02 06 03 00 0f 00 00 77 02 17  ".............w.."
>  9a230  03 00 05 00 05 08 02 08 03 00 05 00 05 09 02 09  "................"
>  9a240  03 00 05 00 05 0a 02 0a 03 00 0f 00 00 75 02 13  ".............u.."
>  9a250  03 00 05 00 05 0c 02 0c 03 00 05 00 05 0d 02 0d  "................"
>  9a260  03 00 05 00 05 0e 02 0e 03 00 05 00 05 0f 02 0f  "................"
>  9a270  03 00 0f 00 00 7d 02 11 03 00 0f 00 02 04 02 12  ".....}.........."
>  9a280  03 00 0f 00 04 0c 02 16 04 03 05 00 05 00 ff 00  "................"
>  9a290  04 01 05 00 05 00 ff 01 80 14 00 00 00 00 00 00  "................"
>  9a2a0  00 00 00 00 00 00 01 00 00 00 00 00 80 14 00 01  "................"
>  9a2b0  00 00 00 40 00 00 00 00 00 00 00 92 00 00 00 00  "...@............"
>  9a2c0  80 14 00 02 00 00 00 d2 00 00 00 00 00 00 00 1e  "................"
>  9a2d0  00 00 00 00 80 14 00 01 00 00 00 f0 00 00 00 00  "................"
>  9a2e0  00 00 e0 0e 00 00 00 00 80 14 00 01 00 10 e0 fe  "................"
>  9a2f0  00 00 00 00 00 f0 1f 01 00 00 00 00 80 14 04 01  "................"
>  9a300  00 00 0a 00 00 00 00 00 00 00 02 00 00 00 00 00  "................"
>  9a310  80 14 04 01 00 00 0d 00 00 00 00 00 00 00 01 00  "................"
>  9a320  00 00 00 00 81 08 05 01 00 00 00 00 82 08 00 00  "................"
>  9a330  00 00 00 00 82 08 00 00 01 00 00 00  "............"
>----- MP config table end -----
>>> bios.4: vbe
>  klog: pci config type 1
>/dev/mem[0xc0000, 3]: mmap(, 4096,,,, 0xc0000) ok
>/dev/mem[0xc0000, 36864]: mmap(, 36864,,,, 0xc0000) ok
>/dev/mem[0x0, 4096]: mmap(, 4096,,,, 0x0) ok
>  vbe: int 10h points to c000:16aa: fb fc 80 fc a0 0f 84 87
>>> bios.4.1: vbe info
>vm86: using CPU emulation
>>> bios.5: 32
>  bios32: valid SD header at 0xf6140 (size 0x10, rev 0), SD at 0xfd5b6
>>> sys.1: cpu
>>> misc.9: kernel log
>----- kernel log -----
>  <5>Linux version 2.6.13-9-xen (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Wed Sep 7 08:33:36 UTC 2005
>  <4>kernel direct mapping tables upto 3c000000 @ bdc000-dbe000
>  <7>On node 0 totalpages: 245760
>  <7>  DMA zone: 245760 pages, LIFO batch:31
>  <7>  Normal zone: 0 pages, LIFO batch:1
>  <7>  HighMem zone: 0 pages, LIFO batch:1
>  <7>ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f6160
>  <7>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x000000003ff7070d
>  <7>ACPI: FADT (v001 INTEL  CANTWOOD 0x06040000 PTL  0x00000003) @ 0x000000003ff75e1e
>  <7>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x000000003ff75e92
>  <7>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x000000003ff75f06
>  <7>ACPI: ASF! (v032 IBM        CETP 0x06040000 PTL  0x00000001) @ 0x000000003ff75f2e
>  <7>ACPI: SSDT (v001 PTLTD  ACPIHT   0x06040000  LTP 0x00000001) @ 0x000000003ff75fc9
>  <7>ACPI: DSDT (v001  INTEL CANTWOOD 0x06040000 MSFT 0x0100000c) @ 0x0000000000000000
>  <7>ACPI: Local APIC address 0xfee00000
>  <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>  <6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>  <6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>  <6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>  <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>  <6>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>  <6>ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
>  <6>IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>  <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>  <7>ACPI: IRQ0 used by override.
>  <7>ACPI: IRQ2 used by override.
>  <7>ACPI: IRQ9 used by override.
>  <6>Setting APIC routing to xen
>  <6>Using ACPI (MADT) for SMP configuration information
>  <3>PCI: Warning: Cannot find a gap in the 32bit address range
>  <3>PCI: Unassigned devices with 32bit resource registers may break!
>  <6>Allocating PCI resources starting at 3c100000 (gap: 3c100000:400000)
>  <4>Built 1 zonelists
>  <5>Kernel command line: root=/dev/sda2 vga=normal
>  <4>Initializing CPU#0
>  <4>PID hash table entries: 4096 (order: 12, 131072 bytes)
>  <6>Xen reported: 3200.668 MHz processor.
>  <4>Console: colour VGA+ 80x25
>  <4>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>  <4>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>  <4>Memory: 954112k/983040k available (2354k kernel code, 28232k reserved, 822k data, 156k init)
>  <4>Calibrating delay using timer specific routine.. 6403.25 BogoMIPS (lpj=32016289)
>  <6>Security Framework v1.0.0 initialized
>  <6>SELinux:  Disabled at boot.
>  <4>Mount-cache hash table entries: 256
>  <6>CPU: Trace cache: 12K uops, L1 D cache: 16K
>  <6>CPU: L2 cache: 1024K
>  <4>CPU:               Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
>  <6>checking if image is initramfs... it is
>  <6>ACPI: Looking for DSDT in initrd... not found!
>  <4> not found!
>  <6>NET: Registered protocol family 16
>  <6>ACPI: bus type pci registered
>  <6>PCI: Using configuration type 1
>  <6>ACPI: Subsystem revision 20050408
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: Using IOAPIC for interrupt routing
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <4>PCI: Probing PCI hardware (bus 00)
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>  <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>  <7>Boot video device is 0000:04:02.0
>  <6>PCI: Transparent bridge - 0000:00:1e.0
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CSA_._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs *3 10 11 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 11 14 15) *5
>  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5
>  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 *11 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *7
>  <6>Linux Plug and Play Support v0.97 (c) Adam Belay
>  <6>pnp: PnP ACPI init
>  <6>pnp: PnP ACPI: found 13 devices
>  <6>xen_mem: Initialising balloon driver.
>  <6>PCI: Using ACPI for IRQ routing
>  <6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>  <3>PCI: Cannot allocate resource region 7 of bridge 0000:00:1e.0
>  <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>  <6>PCI: Bridge: 0000:00:03.0
>  <6>  IO window: 2000-2fff
>  <6>  MEM window: d0100000-d01fffff
>  <6>  PREFETCH window: 3c100000-3c1fffff
>  <6>PCI: Bridge: 0000:00:1c.0
>  <6>  IO window: disabled.
>  <6>  MEM window: disabled.
>  <6>  PREFETCH window: disabled.
>  <6>PCI: Bridge: 0000:00:1e.0
>  <6>  IO window: disabled.
>  <6>  MEM window: d0200000-d02fffff
>  <6>  PREFETCH window: e0000000-efffffff
>  <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>  <4>Grant table initialized
>  <6>Simple Boot Flag at 0x38 set to 0x80
>  <4>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>  <6>audit: initializing netlink socket (disabled)
>  <4>audit(1126534552.660:1): initialized
>  <5>VFS: Disk quotas dquot_6.5.1
>  <4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>  <6>Initializing Cryptographic API
>  <6>Real Time Clock Driver v1.12
>  <6>Non-volatile memory driver v1.2
>  <6>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered
>  <4>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>  <6>loop: loaded (max 8 devices)
>  <4>WARNING: Failed to register Xen virtual console driver as 'ttyS0'
>  <4>Event-channel device installed.
>  <6>xen_net: Initialising Xen netif backend.
>  <6>xen_net: Using grant tables.
>  <1>Successfully initialized TPM backend driver.
>  <6>xen_tpm_fr: Initialising the vTPM driver.
>  <6>mice: PS/2 mouse device common for all mice
>  <6>input: PC Speaker
>  <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>  <6>md: bitmap version 3.38
>  <6>NET: Registered protocol family 2
>  <6>input: AT Translated Set 2 keyboard on isa0060/serio0
>  <4>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>  <4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>  <4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>  <6>TCP: Hash tables configured (established 131072 bind 65536)
>  <6>TCP reno registered
>  <6>NET: Registered protocol family 1
>  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  <5>SCSI subsystem initialized
>  <6>ICH5: IDE controller at PCI slot 0000:00:1f.1
>  <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
>  <6>ICH5: chipset revision 2
>  <6>ICH5: not 100% native mode: will probe irqs later
>  <6>    ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio
>  <6>    ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:pio, hdd:pio
>  <7>Probing IDE interface ide0...
>  <6>input: PS/2 Generic Mouse on isa0060/serio1
>  <4>hda: CD-224E, ATAPI CD/DVD-ROM drive
>  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  <7>Probing IDE interface ide1...
>  <7>libata version 1.12 loaded.
>  <7>ata_piix version 1.04
>  <6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16
>  <7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>  <6>ata1: SATA max UDMA/133 cmd 0x1490 ctl 0x1486 bmdma 0x1470 irq 16
>  <6>ata2: SATA max UDMA/133 cmd 0x1488 ctl 0x1482 bmdma 0x1478 irq 16
>  <7>ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f
>  <6>ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
>  <6>ata1: dev 0 configured for UDMA/133
>  <6>scsi0 : ata_piix
>  <7>ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f
>  <6>ata2: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
>  <6>ata2: dev 0 configured for UDMA/133
>  <6>scsi1 : ata_piix
>  <5>  Vendor: ATA       Model: Maxtor 6Y160M0    Rev: YAR5
>  <5>  Type:   Direct-Access                      ANSI SCSI revision: 05
>  <5>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>  <5>SCSI device sda: drive cache: write back
>  <5>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>  <5>SCSI device sda: drive cache: write back
>  <6> sda: sda1 sda2
>  <5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  <5>  Vendor: ATA       Model: Maxtor 6Y160M0    Rev: YAR5
>  <5>  Type:   Direct-Access                      ANSI SCSI revision: 05
>  <5>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>  <5>SCSI device sdb: drive cache: write back
>  <5>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>  <5>SCSI device sdb: drive cache: write back
>  <6> sdb: unknown partition table
>  <5>Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
>  <6>ACPI: CPU0 (power states: C1[C1] C3[C3])
>  <6>ACPI: Processor [CPU0] (supports 8 throttling states)
>  <4>    ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x1
>  <5>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>  <5>Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
>  <5>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>  <5>ReiserFS: sda2: using ordered data mode
>  <5>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>  <5>ReiserFS: sda2: checking transaction log (sda2)
>  <5>ReiserFS: sda2: Using r5 hash to sort names
>  <6>md: Autodetecting RAID arrays.
>  <6>md: autorun ...
>  <6>md: ... autorun DONE.
>  <6>Adding 1052216k swap on /dev/sda1.  Priority:-1 extents:1
>  <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>  <6>lp: driver loaded but no devices found
>  <6>usbcore: registered new driver usbfs
>  <6>usbcore: registered new driver hub
>  <6>USB Universal Host Controller Interface driver v2.3
>  <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>  <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>  <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>  <6>uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001400
>  <6>hub 1-0:1.0: USB hub found
>  <6>hub 1-0:1.0: 2 ports detected
>  <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>  <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>  <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>  <6>uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001420
>  <6>hub 2-0:1.0: USB hub found
>  <6>hub 2-0:1.0: 2 ports detected
>  <3>hw_random: RNG not detected
>  <6>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
>  <7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>  <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>  <6>ehci_hcd 0000:00:1d.7: debug port 1
>  <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
>  <6>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd0000400
>  <7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>  <6>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>  <6>hub 3-0:1.0: USB hub found
>  <6>hub 3-0:1.0: 4 ports detected
>  <6>Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI
>  <6>Copyright (c) 1999-2005 Intel Corporation.
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <6>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 16
>  <7>PCI: Setting latency timer of device 0000:02:01.0 to 64
>  <6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>  <6>ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 22 (level, low) -> IRQ 20
>  <6>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
>  <6>Floppy drive(s): fd0 is 1.44M
>  <6>hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
>  <6>Uniform CD-ROM driver Revision: 3.20
>  <6>e1000: eth0: e1000_watchdog_task: NIC Link is Up 10 Mbps Half Duplex
>  <6>ACPI: Power Button (FF) [PWRF]
>  <6>ACPI: Power Button (CM) [PWRB]
>  <4>pcc_acpi: module not supported by Novell, setting U taint flag.
>  <4>floppy0: no floppy controllers found
>  <6>NET: Registered protocol family 10
>  <6>Disabled Privacy Extensions on device ffffffff803dd020(lo)
>  <6>IPv6 over IPv4 tunneling driver
>  <4>store_evtchn = 16
>  <5>Bridge firewalling registered
>  <6>device vif0.0 entered promiscuous mode
>  <6>bridge: can't decode speed from peth0: 65535
>  <6>device peth0 entered promiscuous mode
>  <6>xenbr0: port 1(vif0.0) entering learning state
>  <6>xenbr0: topology change detected, propagating
>  <6>xenbr0: port 1(vif0.0) entering forwarding state
>  <6>e1000: peth0: e1000_watchdog_task: NIC Link is Up 10 Mbps Half Duplex
>  <6>xenbr0: port 2(peth0) entering learning state
>  <6>xenbr0: topology change detected, propagating
>  <6>xenbr0: port 2(peth0) entering forwarding state
>  <7>peth0: no IPv6 routers present
>  <7>xenbr0: no IPv6 routers present
>  <7>vif0.0: no IPv6 routers present
>  <7>eth0: no IPv6 routers present
>  <6>subfs 0.9
>  <7>ISO 9660 Extensions: Microsoft Joliet Level 3
>  <7>ISO 9660 Extensions: RRIP_1991A
>  <7>ISO 9660 Extensions: Microsoft Joliet Level 3
>  <7>ISO 9660 Extensions: RRIP_1991A
>  <7>ISO 9660 Extensions: Microsoft Joliet Level 3
>  <7>ISO 9660 Extensions: RRIP_1991A
>  <7>ISO 9660 Extensions: Microsoft Joliet Level 3
>  <7>ISO 9660 Extensions: RRIP_1991A
>  <4>ip_tables: (C) 2000-2002 Netfilter core team
>  <7>ISO 9660 Extensions: Microsoft Joliet Level 3
>  <7>ISO 9660 Extensions: RRIP_1991A
>  <7>ISO 9660 Extensions: Microsoft Joliet Level 3
>  <7>ISO 9660 Extensions: RRIP_1991A
>  <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>  <4>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>  <4>NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist
>  <4>NFSD: starting 90-second grace period
>  <7>ISO 9660 Extensions: Microsoft Joliet Level 3
>  <7>ISO 9660 Extensions: RRIP_1991A
>  <6>y2base[6810]: segfault at 0000000000000010 rip 00002aaaae4cbfc0 rsp 00007fffffbfe4a8 error 4
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/rmmod lp" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport " -----
>----- return code: ? -----
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>  0000-001f : dma1
>  0020-0021 : pic1
>  0040-0043 : timer0
>  0050-0053 : timer1
>  0060-006f : keyboard
>  0070-0077 : rtc
>  0080-008f : dma page reg
>  00a0-00a1 : pic2
>  00c0-00df : dma2
>  00f0-00ff : fpu
>  01f0-01f7 : ide0
>  03c0-03df : vga+
>  03f6-03f6 : ide0
>  03f8-03ff : serial
>  0cf8-0cff : PCI conf1
>  1000-107f : 0000:00:1f.0
>    1000-107f : motherboard
>      1000-1003 : PM1a_EVT_BLK
>      1008-100b : PM_TMR
>      1010-1015 : ACPI CPU throttle
>      1020-1020 : PM2_CNT_BLK
>      1028-102f : GPE0_BLK
>      1060-106f : i8xx TCO
>  1180-11bf : 0000:00:1f.0
>    1180-11bf : motherboard
>  1400-141f : 0000:00:1d.0
>    1400-141f : uhci_hcd
>  1420-143f : 0000:00:1d.1
>    1420-143f : uhci_hcd
>  1440-145f : 0000:00:1f.3
>    1440-144f : i801-smbus
>  1460-146f : 0000:00:1f.1
>    1460-1467 : ide0
>    1468-146f : ide1
>  1470-147f : 0000:00:1f.2
>    1470-147f : libata
>  1480-1483 : 0000:00:1f.2
>    1480-1483 : libata
>  1484-1487 : 0000:00:1f.2
>    1484-1487 : libata
>  1488-148f : 0000:00:1f.2
>    1488-148f : libata
>  1490-1497 : 0000:00:1f.2
>    1490-1497 : libata
>  2000-2fff : PCI Bus #02
>    2000-201f : 0000:02:01.0
>      2000-201f : e1000
>  3000-30ff : 0000:04:02.0
>  3400-343f : 0000:04:03.0
>    3400-343f : e1000
>  fe00-fe00 : motherboard
>  fe10-fe11 : motherboard
>    fe10-fe11 : PM1a_CNT_BLK
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>    1:       1395        Phys-irq  i8042
>    4:          1        Phys-irq  serial
>    8:          0        Phys-irq  rtc
>    9:          0        Phys-irq  acpi
>   12:      37628        Phys-irq  i8042
>   14:       4996        Phys-irq  ide0
>   16:      20449        Phys-irq  libata, peth0
>   17:          0        Phys-irq  uhci_hcd:usb1
>   18:          0        Phys-irq  uhci_hcd:usb2
>   19:          0        Phys-irq  ehci_hcd:usb3
>  256:          0     Dynamic-irq  ctrl-if
>  257:      62660     Dynamic-irq  timer0
>  258:          0     Dynamic-irq  net-be-dbg
>  259:         26     Dynamic-irq  xenbus
>  NMI:          0 
>  LOC:          0 
>  ERR:          0
>----- /proc/interrupts end -----
>----- /proc/dma -----
>   4: cascade
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 15
>  model		: 4
>  model name	:               Intel(R) Pentium(R) 4 CPU 3.20GHz
>  stepping	: 1
>  cpu MHz		: 3200.668
>  cache size	: 1024 KB
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 5
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
>  bogomips	: 6403.25
>  clflush size	: 64
>  cache_alignment	: 128
>  address sizes	: 36 bits physical, 48 bits virtual
>  power management:
>  
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0x3c000000
>  klog mem 0: 0x0
>  klog mem 1: 0x0
>  klog mem:   0x0
>  bios mem:   0x0
>  meminfo:    0x3a46e000
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0xc01949d81963985d) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>        PIIX_IDE: /devices/pci0000:00/0000:00:1f.1
>        ata_piix: /devices/pci0000:00/0000:00:1f.2
>           e1000: /devices/pci0000:00/0000:00:03.0/0000:02:01.0
>           e1000: /devices/pci0000:00/0000:00:1e.0/0000:04:03.0
>        ehci_hcd: /devices/pci0000:00/0000:00:1d.7
>      i801_smbus: /devices/pci0000:00/0000:00:1f.3
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.0
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.1
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>       i8042 aux: /devices/pnp0/00:0c
>       i8042 kbd: /devices/pnp0/00:0b
>          serial: /devices/pnp0/00:0a
>          system: /devices/pnp0/00:01
>              sd: /devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
>              sd: /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0
>           atkbd: /devices/platform/i8042/serio1
>         psmouse: /devices/platform/i8042/serio0
>             hub: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.7/usb3/3-0:1.0
>             hub: /module/usbcore
>             usb: /devices/pci0000:00/0000:00:1d.0/usb1
>             usb: /devices/pci0000:00/0000:00:1d.1/usb2
>             usb: /devices/pci0000:00/0000:00:1d.7/usb3
>             usb: /module/usbcore
>           usbfs: /module/usbcore
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:00.0
>    modalias = "pci:v00008086d00002578sv00001014sd000002ADbc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x8086
>    device = 0x2578
>    subvendor = 0x1014
>    subdevice = 0x2ad
>    irq = 0
>    res[0] = 0xd2000000 0xd3ffffff 0x1208
>    config[64]
>  pci device: name = 0000:00:03.0, bus_id = 0000:00:03.0, bus = pci
>    path = /devices/pci0000:00/0000:00:03.0
>    modalias = "pci:v00008086d0000257Bsv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x257b
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1c.0, bus_id = 0000:00:1c.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1c.0
>    modalias = "pci:v00008086d000025AEsv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x25ae
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1d.0, bus_id = 0000:00:1d.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.0
>    modalias = "pci:v00008086d000025A9sv00001014sd000002AEbc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x25a9
>    subvendor = 0x1014
>    subdevice = 0x2ae
>    irq = 17
>    res[4] = 0x1400 0x141f 0x101
>    config[64]
>  pci device: name = 0000:00:1d.1, bus_id = 0000:00:1d.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.1
>    modalias = "pci:v00008086d000025AAsv00001014sd000002AEbc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x25aa
>    subvendor = 0x1014
>    subdevice = 0x2ae
>    irq = 18
>    res[4] = 0x1420 0x143f 0x101
>    config[64]
>  pci device: name = 0000:00:1d.4, bus_id = 0000:00:1d.4, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.4
>    modalias = "pci:v00008086d000025ABsv00001014sd000002AEbc08sc80i00
>"
>    class = 0x88000
>    vendor = 0x8086
>    device = 0x25ab
>    subvendor = 0x1014
>    subdevice = 0x2ae
>    irq = 0
>    res[0] = 0xd0000000 0xd000000f 0x200
>    config[64]
>  pci device: name = 0000:00:1d.5, bus_id = 0000:00:1d.5, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.5
>    modalias = "pci:v00008086d000025ACsv00001014sd000002AEbc08sc00i20
>"
>    class = 0x80020
>    vendor = 0x8086
>    device = 0x25ac
>    subvendor = 0x1014
>    subdevice = 0x2ae
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1d.7, bus_id = 0000:00:1d.7, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.7
>    modalias = "pci:v00008086d000025ADsv00001014sd000002AEbc0Csc03i20
>"
>    class = 0xc0320
>    vendor = 0x8086
>    device = 0x25ad
>    subvendor = 0x1014
>    subdevice = 0x2ae
>    irq = 19
>    res[0] = 0xd0000400 0xd00007ff 0x200
>    config[64]
>  pci device: name = 0000:00:1e.0, bus_id = 0000:00:1e.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0
>    modalias = "pci:v00008086d0000244Esv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x244e
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.0, bus_id = 0000:00:1f.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.0
>    modalias = "pci:v00008086d000025A1sv00000000sd00000000bc06sc01i00
>"
>    class = 0x60100
>    vendor = 0x8086
>    device = 0x25a1
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.1, bus_id = 0000:00:1f.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.1
>    modalias = "pci:v00008086d000025A2sv00001014sd000002AEbc01sc01i8a
>"
>    class = 0x1018a
>    vendor = 0x8086
>    device = 0x25a2
>    subvendor = 0x1014
>    subdevice = 0x2ae
>    irq = 16
>    res[4] = 0x1460 0x146f 0x101
>    res[5] = 0x3c200000 0x3c2003ff 0x200
>    config[64]
>  pci device: name = 0000:00:1f.2, bus_id = 0000:00:1f.2, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.2
>    modalias = "pci:v00008086d000025B0sv00001014sd000002AEbc01sc04i8f
>"
>    class = 0x1048f
>    vendor = 0x8086
>    device = 0x25b0
>    subvendor = 0x1014
>    subdevice = 0x2ae
>    irq = 16
>    res[0] = 0x1490 0x1497 0x101
>    res[1] = 0x1484 0x1487 0x101
>    res[2] = 0x1488 0x148f 0x101
>    res[3] = 0x1480 0x1483 0x101
>    res[4] = 0x1470 0x147f 0x101
>    config[64]
>  pci device: name = 0000:00:1f.3, bus_id = 0000:00:1f.3, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.3
>    modalias = "pci:v00008086d000025A4sv00001014sd000002AEbc0Csc05i00
>"
>    class = 0xc0500
>    vendor = 0x8086
>    device = 0x25a4
>    subvendor = 0x1014
>    subdevice = 0x2ae
>    irq = 5
>    res[4] = 0x1440 0x145f 0x101
>    config[64]
>  pci device: name = 0000:02:01.0, bus_id = 0000:02:01.0, bus = pci
>    path = /devices/pci0000:00/0000:00:03.0/0000:02:01.0
>    modalias = "pci:v00008086d00001075sv00001014sd000002AEbc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x8086
>    device = 0x1075
>    subvendor = 0x1014
>    subdevice = 0x2ae
>    irq = 16
>    res[0] = 0xd0120000 0xd013ffff 0x200
>    res[1] = 0xd0100000 0xd011ffff 0x200
>    res[2] = 0x2000 0x201f 0x101
>    res[6] = 0x3c100000 0x3c11ffff 0x7200
>    config[64]
>  pci device: name = 0000:04:02.0, bus_id = 0000:04:02.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:04:02.0
>    modalias = "pci:v00001002d00005159sv00001014sd000002C8bc03sc00i00
>"
>    class = 0x30000
>    vendor = 0x1002
>    device = 0x5159
>    subvendor = 0x1014
>    subdevice = 0x2c8
>    irq = 3
>    res[0] = 0xe0000000 0xefffffff 0x1208
>    res[1] = 0x3000 0x30ff 0x101
>    res[2] = 0xd0200000 0xd020ffff 0x200
>    res[6] = 0xd0260000 0xd027ffff 0x7202
>    config[64]
>  pci device: name = 0000:04:03.0, bus_id = 0000:04:03.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:04:03.0
>    modalias = "pci:v00008086d00001076sv00001014sd000002AEbc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x8086
>    device = 0x1076
>    subvendor = 0x1014
>    subdevice = 0x2ae
>    irq = 20
>    res[0] = 0xd0240000 0xd025ffff 0x200
>    res[1] = 0xd0220000 0xd023ffff 0x200
>    res[2] = 0x3400 0x343f 0x101
>    res[6] = 0xd0280000 0xd029ffff 0x7200
>    config[64]
>---------- PCI raw data ----------
>bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:2578:1014:02ad:02
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  addr0 d2000000, size 02000000
>  00: 86 80 78 25 06 01 90 20 02 00 00 06 00 00 00 00  "..x%... ........"
>  10: 08 00 00 d2 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 ad 02  "................"
>  30: 00 00 00 00 e4 00 00 00 00 00 00 00 00 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  e0: 00 00 00 00 09 00  "......"
>
>bus 00->02, slot 03, func 0, vend:dev:s_vend:s_dev:rev 8086:257b:0000:0000:02
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 86 80 7b 25 07 01 a0 00 02 00 04 06 00 30 01 00  "..{%.........0.."
>  10: 00 00 00 00 00 00 00 00 00 02 02 00 20 20 a0 02  "............  .."
>  20: 10 d0 10 d0 10 3c 10 3c 00 00 00 00 00 00 00 00  ".....<.<........"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00  "................"
>
>bus 00->03, slot 1c, func 0, vend:dev:s_vend:s_dev:rev 8086:25ae:0000:0000:02
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 86 80 ae 25 47 01 30 00 02 00 04 06 10 30 01 00  "...%G.0......0.."
>  10: 00 00 00 00 00 00 00 00 00 03 03 40 f0 00 a0 22  "...........@...""
>  20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 06 00  "....P..........."
>
>bus 00, slot 1d, func 0, vend:dev:s_vend:s_dev:rev 8086:25a9:1014:02ae:02
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 17
>  addr4 00001400, size 00000020
>  00: 86 80 a9 25 05 00 80 02 02 00 03 0c 00 00 80 00  "...%............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 14 00 00 00 00 00 00 00 00 00 00 14 10 ae 02  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 03 01 00 00  "................"
>
>bus 00, slot 1d, func 1, vend:dev:s_vend:s_dev:rev 8086:25aa:1014:02ae:02
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 18
>  addr4 00001420, size 00000020
>  00: 86 80 aa 25 05 00 80 02 02 00 03 0c 00 00 00 00  "...%............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 21 14 00 00 00 00 00 00 00 00 00 00 14 10 ae 02  "!..............."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00  "................"
>
>bus 00, slot 1d, func 4, vend:dev:s_vend:s_dev:rev 8086:25ab:1014:02ae:02
>class 08, sub_class 80 prog_if 00, hdr 0, flags <>, irq 0
>  addr0 d0000000, size 00000010
>  00: 86 80 ab 25 02 00 80 02 02 00 80 08 00 00 00 00  "...%............"
>  10: 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 ae 02  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 1d, func 5, vend:dev:s_vend:s_dev:rev 8086:25ac:1014:02ae:02
>class 08, sub_class 00 prog_if 20, hdr 0, flags <>, irq 0
>  00: 86 80 ac 25 46 01 10 00 02 20 00 08 00 00 00 00  "...%F.... ......"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 ae 02  "................"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00  "....P..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 07 00  ".."
>
>bus 00, slot 1d, func 7, vend:dev:s_vend:s_dev:rev 8086:25ad:1014:02ae:02
>class 0c, sub_class 03 prog_if 20, hdr 0, flags <pm>, irq 19
>  addr0 d0000400, size 00000400
>  00: 86 80 ad 25 06 01 90 02 02 20 03 0c 00 00 00 00  "...%..... ......"
>  10: 00 04 00 d0 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 ae 02  "................"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 07 04 00 00  "....P..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 01 58 00 00 00 00 00 00 0a 00  ".X........"
>
>bus 00->04, slot 1e, func 0, vend:dev:s_vend:s_dev:rev 8086:244e:0000:0000:0a
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 86 80 4e 24 47 01 80 00 0a 00 04 06 00 00 01 00  "..N$G..........."
>  10: 00 00 00 00 00 00 00 00 00 04 04 20 f0 00 80 22  "........... ...""
>  20: 20 d0 20 d0 00 e0 f0 ef 00 00 00 00 00 00 00 00  " . ............."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0e 00  "................"
>
>bus 00, slot 1f, func 0, vend:dev:s_vend:s_dev:rev 8086:25a1:0000:0000:02
>class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0
>  00: 86 80 a1 25 4f 01 80 02 02 00 01 06 00 00 80 00  "...%O..........."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 1f, func 1, vend:dev:s_vend:s_dev:rev 8086:25a2:1014:02ae:02
>class 01, sub_class 01 prog_if 8a, hdr 0, flags <>, irq 16
>  addr4 00001460, size 00000010
>  addr5 3c200000, size 00000400
>  00: 86 80 a2 25 07 00 88 02 02 8a 01 01 00 00 00 00  "...%............"
>  10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00  "................"
>  20: 61 14 00 00 00 00 20 3c 00 00 00 00 14 10 ae 02  "a..... <........"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00  "................"
>
>bus 00, slot 1f, func 2, vend:dev:s_vend:s_dev:rev 8086:25b0:1014:02ae:02
>class 01, sub_class 04 prog_if 8f, hdr 0, flags <>, irq 16
>  addr0 00001490, size 00000008
>  addr1 00001484, size 00000004
>  addr2 00001488, size 00000008
>  addr3 00001480, size 00000004
>  addr4 00001470, size 00000010
>  00: 86 80 b0 25 45 00 a0 02 02 8f 04 01 00 00 00 00  "...%E..........."
>  10: 91 14 00 00 85 14 00 00 89 14 00 00 81 14 00 00  "................"
>  20: 71 14 00 00 00 00 00 00 00 00 00 00 14 10 ae 02  "q..............."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 00  "................"
>
>bus 00, slot 1f, func 3, vend:dev:s_vend:s_dev:rev 8086:25a4:1014:02ae:02
>class 0c, sub_class 05 prog_if 00, hdr 0, flags <>, irq 5
>  addr4 00001440, size 00000020
>  00: 86 80 a4 25 01 00 80 02 02 00 05 0c 00 00 00 00  "...%............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 41 14 00 00 00 00 00 00 00 00 00 00 14 10 ae 02  "A..............."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 05 02 00 00  "................"
>
>bus 02, slot 01, func 0, vend:dev:s_vend:s_dev:rev 8086:1075:1014:02ae:00
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 16
>  addr0 d0120000, size 00020000
>  addr1 d0100000, size 00020000
>  addr2 00002000, size 00000020
>  00: 86 80 75 10 07 00 38 02 00 00 00 02 08 00 00 00  "..u...8........."
>  10: 00 00 12 d0 00 00 10 d0 01 20 00 00 00 00 00 00  "......... ......"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 ae 02  "................"
>  30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 ff 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00  ".............."
>
>bus 04, slot 02, func 0, vend:dev:s_vend:s_dev:rev 1002:5159:1014:02c8:00
>class 03, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 3
>  addr0 e0000000, size 10000000
>  addr1 00003000, size 00000100
>  addr2 d0200000, size 00010000
>  00: 02 10 59 51 87 01 90 02 00 00 00 03 08 42 00 00  "..YQ.........B.."
>  10: 08 00 00 e0 01 04 00 00 00 00 20 d0 00 00 00 00  ".......... ....."
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 c8 02  "................"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 03 01 08 00  "....P..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 01 00  ".."
>
>bus 04, slot 03, func 0, vend:dev:s_vend:s_dev:rev 8086:1076:1014:02ae:00
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 20
>  addr0 d0240000, size 00020000
>  addr1 d0220000, size 00020000
>  addr2 00003400, size 00000040
>  00: 86 80 76 10 57 01 30 02 00 00 00 02 08 34 00 00  "..v.W.0......4.."
>  10: 00 00 24 d0 00 00 22 d0 01 34 00 00 00 00 00 00  "..$..."..4......"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 ae 02  "................"
>  30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 ff 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 e4 00 00  "................"
>  e0: 00 00 00 00 07 00  "......"
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> monitor.1: ddc
>>> pcmcia.1: sysfs drivers
>>> pcmcia.2: pcmcia
>sysfs: no such bus: pcmcia
>>> pcmcia.3: pcmcia ctrl
>sysfs: no such class: pcmcia_socket
>>> serial.1: read info
>----- /proc/tty/driver/serial -----
>  0: uart:16550A port:000003F8 irq:4 tx:0 rx:0
>  1: uart:unknown port:000002F8 irq:3
>  2: uart:unknown port:000003E8 irq:4
>  3: uart:unknown port:000002E8 irq:3
>----- /proc/tty/driver/serial end -----
>----- serial info -----
>  uart 16550A, line 0, port 0x3f8, irq 4, baud 0
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>i/o:1 0x0000 - 0x001f (0x20) "dma1"
>i/o:1 0x0020 - 0x0021 (0x02) "pic1"
>i/o:0 0x0040 - 0x0043 (0x04) "timer0"
>i/o:0 0x0050 - 0x0053 (0x04) "timer1"
>i/o:1 0x0060 - 0x006f (0x10) "keyboard"
>i/o:1 0x0070 - 0x0077 (0x08) "rtc"
>i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
>i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
>i/o:1 0x00c0 - 0x00df (0x20) "dma2"
>i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
>i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
>i/o:1 0x03c0 - 0x03df (0x20) "vga+"
>i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
>i/o:1 0x03f8 - 0x03ff (0x08) "serial"
>i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
>i/o:0 0x1000 - 0x107f (0x80) "0000:00:1f.0"
>i/o:0 0x1000 - 0x107f (0x80) "motherboard"
>i/o:0 0x1000 - 0x1003 (0x04) "PM1a_EVT_BLK"
>i/o:0 0x1008 - 0x100b (0x04) "PM_TMR"
>i/o:0 0x1010 - 0x1015 (0x06) "ACPI CPU throttle"
>i/o:0 0x1020 - 0x1020 (0x01) "PM2_CNT_BLK"
>i/o:0 0x1028 - 0x102f (0x08) "GPE0_BLK"
>i/o:0 0x1060 - 0x106f (0x10) "i8xx TCO"
>i/o:0 0x1180 - 0x11bf (0x40) "0000:00:1f.0"
>i/o:0 0x1180 - 0x11bf (0x40) "motherboard"
>i/o:0 0x1400 - 0x141f (0x20) "0000:00:1d.0"
>i/o:0 0x1400 - 0x141f (0x20) "uhci_hcd"
>i/o:0 0x1420 - 0x143f (0x20) "0000:00:1d.1"
>i/o:0 0x1420 - 0x143f (0x20) "uhci_hcd"
>i/o:0 0x1440 - 0x145f (0x20) "0000:00:1f.3"
>i/o:0 0x1440 - 0x144f (0x10) "i801-smbus"
>i/o:0 0x1460 - 0x146f (0x10) "0000:00:1f.1"
>i/o:1 0x1460 - 0x1467 (0x08) "ide0"
>i/o:1 0x1468 - 0x146f (0x08) "ide1"
>i/o:0 0x1470 - 0x147f (0x10) "0000:00:1f.2"
>i/o:0 0x1470 - 0x147f (0x10) "libata"
>i/o:0 0x1480 - 0x1483 (0x04) "0000:00:1f.2"
>i/o:0 0x1480 - 0x1483 (0x04) "libata"
>i/o:0 0x1484 - 0x1487 (0x04) "0000:00:1f.2"
>i/o:0 0x1484 - 0x1487 (0x04) "libata"
>i/o:0 0x1488 - 0x148f (0x08) "0000:00:1f.2"
>i/o:0 0x1488 - 0x148f (0x08) "libata"
>i/o:0 0x1490 - 0x1497 (0x08) "0000:00:1f.2"
>i/o:0 0x1490 - 0x1497 (0x08) "libata"
>i/o:0 0x2000 - 0x2fff (0x1000) "PCI Bus #02"
>i/o:0 0x2000 - 0x201f (0x20) "0000:02:01.0"
>i/o:0 0x2000 - 0x201f (0x20) "e1000"
>i/o:0 0x3000 - 0x30ff (0x100) "0000:04:02.0"
>i/o:0 0x3400 - 0x343f (0x40) "0000:04:03.0"
>i/o:0 0x3400 - 0x343f (0x40) "e1000"
>i/o:0 0xfe00 - 0xfe00 (0x01) "motherboard"
>i/o:0 0xfe10 - 0xfe11 (0x02) "motherboard"
>i/o:0 0xfe10 - 0xfe11 (0x02) "PM1a_CNT_BLK"
>irq:0  1 (     1395) "i8042"
>irq:1  4 (        1) "serial"
>irq:1  8 (        0) "rtc"
>irq:0  9 (        0) "acpi"
>irq:0 12 (    37628) "i8042"
>irq:1 14 (     4996) "ide0"
>irq:0 16 (    20449) "libata" "peth0"
>irq:0 17 (        0) "uhci_hcd:usb1"
>irq:0 18 (        0) "uhci_hcd:usb2"
>irq:0 19 (        0) "ehci_hcd:usb3"
>irq:0 256 (        0) "ctrl-if"
>irq:0 257 (    62660) "timer0"
>irq:0 258 (        0) "net-be-dbg"
>irq:0 259 (       26) "xenbus"
>dma:1 4 "cascade"
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/rmmod lp" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe lp" -----
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>----- exec: "/sbin/modprobe sr_mod " -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe st " -----
>----- return code: ? -----
>>> block.2: sysfs drivers
>----- sysfs driver list (id 0x9c0c868de2866687) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>        PIIX_IDE: /devices/pci0000:00/0000:00:1f.1
>        ata_piix: /devices/pci0000:00/0000:00:1f.2
>           e1000: /devices/pci0000:00/0000:00:03.0/0000:02:01.0
>           e1000: /devices/pci0000:00/0000:00:1e.0/0000:04:03.0
>        ehci_hcd: /devices/pci0000:00/0000:00:1d.7
>      i801_smbus: /devices/pci0000:00/0000:00:1f.3
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.0
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.1
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>       i8042 aux: /devices/pnp0/00:0c
>       i8042 kbd: /devices/pnp0/00:0b
>          serial: /devices/pnp0/00:0a
>          system: /devices/pnp0/00:01
>              sd: /devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
>              sd: /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0
>           atkbd: /devices/platform/i8042/serio1
>         psmouse: /devices/platform/i8042/serio0
>             hub: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.7/usb3/3-0:1.0
>             hub: /module/usbcore
>             usb: /devices/pci0000:00/0000:00:1d.0/usb1
>             usb: /devices/pci0000:00/0000:00:1d.1/usb2
>             usb: /devices/pci0000:00/0000:00:1d.7/usb3
>             usb: /module/usbcore
>           usbfs: /module/usbcore
>----- sysfs driver list end -----
>>> block.3: cdrom
>----- /proc/sys/dev/cdrom/info -----
>drive name:		hda
>drive speed:		24
>drive # of slots:	1
>Can close tray:		1
>Can open tray:		1
>Can lock tray:		1
>Can change speed:	1
>Can select disk:	0
>Can read multisession:	1
>Can read MCN:		1
>Reports media changed:	1
>Can play audio:		1
>Can write CD-R:		0
>Can write CD-RW:	0
>Can read DVD:		0
>Can write DVD-R:	0
>Can write DVD-RAM:	0
>Can read MRW:		1
>Can write MRW:		1
>Can write RAM:		1
>----- /proc/sys/dev/cdrom/info end -----
>>> block.4: partition
>----- /proc/partitions -----
>     8     0  156290904 sda
>     8     1    1052226 sda1
>     8     2  155236095 sda2
>     8    16  156290904 sdb
>----- /proc/partitions end -----
>disks:
>  sda
>  sdb
>partitions:
>  sda1
>  sda2
>>> block.5: get sysfs block dev data
>  ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  block: name = hda, path = /block/hda
>    dev = 3:0
>    range = 1
>    block device: bus = ide, bus_id = 0.0 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  hda: el torito boot catalog at 0x00b8
>    media type: 0
>    load address: 0x0000
>  block: name = loop0, path = /block/loop0
>    dev = 7:0
>    range = 1
>  block: name = loop1, path = /block/loop1
>    dev = 7:1
>    range = 1
>  block: name = loop2, path = /block/loop2
>    dev = 7:2
>    range = 1
>  block: name = loop3, path = /block/loop3
>    dev = 7:3
>    range = 1
>  block: name = loop4, path = /block/loop4
>    dev = 7:4
>    range = 1
>  block: name = loop5, path = /block/loop5
>    dev = 7:5
>    range = 1
>  block: name = loop6, path = /block/loop6
>    dev = 7:6
>    range = 1
>  block: name = loop7, path = /block/loop7
>    dev = 7:7
>    range = 1
>  block: name = md0, path = /block/md0
>    dev = 9:0
>    range = 1
>  block: name = ram0, path = /block/ram0
>    dev = 1:0
>    range = 1
>  block: name = ram10, path = /block/ram10
>    dev = 1:10
>    range = 1
>  block: name = ram11, path = /block/ram11
>    dev = 1:11
>    range = 1
>  block: name = ram12, path = /block/ram12
>    dev = 1:12
>    range = 1
>  block: name = ram13, path = /block/ram13
>    dev = 1:13
>    range = 1
>  block: name = ram14, path = /block/ram14
>    dev = 1:14
>    range = 1
>  block: name = ram15, path = /block/ram15
>    dev = 1:15
>    range = 1
>  block: name = ram1, path = /block/ram1
>    dev = 1:1
>    range = 1
>  block: name = ram2, path = /block/ram2
>    dev = 1:2
>    range = 1
>  block: name = ram3, path = /block/ram3
>    dev = 1:3
>    range = 1
>  block: name = ram4, path = /block/ram4
>    dev = 1:4
>    range = 1
>  block: name = ram5, path = /block/ram5
>    dev = 1:5
>    range = 1
>  block: name = ram6, path = /block/ram6
>    dev = 1:6
>    range = 1
>  block: name = ram7, path = /block/ram7
>    dev = 1:7
>    range = 1
>  block: name = ram8, path = /block/ram8
>    dev = 1:8
>    range = 1
>  block: name = ram9, path = /block/ram9
>    dev = 1:9
>    range = 1
>  block: name = sda, path = /block/sda
>    dev = 8:0
>    range = 16
>    block device: bus = scsi, bus_id = 0:0:0:0 driver = sd
>      path = /devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
>    vendor = ATA
>    model = Maxtor 6Y160M0
>    rev = YAR5
>    type = 0
>>> block.5: /dev/sda
>>> block.5.1: /dev/sda geo
>  dev = /dev/sda, fd = 3
>  open ok, fd = 3
>/dev/sda: ioctl(geo) ok
>/dev/sda: ioctl(block size) ok
>/dev/sda: ioctl(disk size) ok
>>> block.5.2: /dev/sda serial
>  serial id len: 20
>  block: name = sdb, path = /block/sdb
>    dev = 8:16
>    range = 16
>    block device: bus = scsi, bus_id = 1:0:0:0 driver = sd
>      path = /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0
>    vendor = ATA
>    model = Maxtor 6Y160M0
>    rev = YAR5
>    type = 0
>>> block.5: /dev/sdb
>>> block.5.1: /dev/sdb geo
>  dev = /dev/sdb, fd = 3
>  open ok, fd = 3
>/dev/sdb: ioctl(geo) ok
>/dev/sdb: ioctl(block size) ok
>/dev/sdb: ioctl(disk size) ok
>>> block.5.2: /dev/sdb serial
>  serial id len: 20
>>> scsi.1: scsi modules
>>> scsi.2: scsi tape
>>> scsi.3: scsi generic
>  scsi: name = sg0, path = /class/scsi_generic/sg0
>    dev = 21:0
>    scsi device: bus = scsi, bus_id = 0:0:0:0 driver = sd
>      path = /devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
>  scsi: name = sg1, path = /class/scsi_generic/sg1
>    dev = 21:1
>    scsi device: bus = scsi, bus_id = 1:0:0:0 driver = sd
>      path = /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0
>>> usb.1: sysfs drivers
>>> usb.2: usb
>  usb dev: /devices/pci0000:00/0000:00:1d.0/usb1
>  usb dev: /devices/pci0000:00/0000:00:1d.1/usb2
>  usb dev: /devices/pci0000:00/0000:00:1d.7/usb3
>  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:1d.0/usb1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-9-xen uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.0"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:1d.1/usb2
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-9-xen uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.1"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 3-0:1.0, bus_id = 3-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.7/usb3/3-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 3-0:1.0 @ /devices/pci0000:00/0000:00:1d.7/usb3
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 1
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-9-xen ehci_hcd"
>    product = "EHCI Host Controller"
>    serial = "0000:00:1d.7"
>    bcdDevice = 0206
>    speed = "480"
>  usb device: name = usb1, bus_id = usb1, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1
>  usb device: name = usb2, bus_id = usb2, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.1/usb2
>  usb device: name = usb3, bus_id = usb3, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.7/usb3
>>> usb.3.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>----- return code: ? -----
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> usb.3.3: input
>  input: name = event0, path = /class/input/event0
>    dev = 13:64
>  input: name = event1, path = /class/input/event1
>    dev = 13:65
>    input device: bus = serio, bus_id = serio1 driver = atkbd
>      path = /devices/platform/i8042/serio1
>  input: name = event2, path = /class/input/event2
>    dev = 13:66
>    input device: bus = serio, bus_id = serio0 driver = psmouse
>      path = /devices/platform/i8042/serio0
>  input: name = mice, path = /class/input/mice
>    dev = 13:63
>  input: name = mouse0, path = /class/input/mouse0
>    dev = 13:32
>    input device: bus = serio, bus_id = serio0 driver = psmouse
>      path = /devices/platform/i8042/serio0
>>> usb.3.4: lp
>>> usb.3.5: serial
>>> edd.1: edd mod
>----- exec: "/sbin/modprobe edd " -----
>  FATAL: Module edd not found.
>----- return code: ? -----
>>> edd.2: edd info
>>> braille.1.1: alva
>>> braille.2.1: alva open
>>> braille.3.1: alva init ok
>>> braille.4.1: alva read data
>alva.100@/dev/ttyS0[0]: 
>>> braille.5.1: alva read done
>>> braille.1.1: fhp_old
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: fhp_el
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: ht
>>> braille.2.1: ht open
>>> braille.3.1: ht init ok
>>> braille.4.1: ht write ok
>>> braille.5.1: ht read done
>ht@/dev/ttyS0[1]: 00  "."
>no ht display: 0x00
>>> braille.1.1: baum
>>> braille.2.1: baum open
>>> braille.3.1: baum write ok
>>> braille.4.1: baum read done
>baum@/dev/ttyS0[0]: 
>>> modem.1: serial
>******  started child process 7114 (15s/120s)  ******
>>> modem.2: init
>>> modem.3.1: at test
>>> modem.3.2: at test
>>> modem.3.3: at test
>>> modem.3.4: at test
>>> modem.4: init string
>>> modem.5: speed
>>> modem.5: pnp id
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>----- serial modems end -----
>******  stopped child process 7114 (121s)  ******
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>----- serial modems end -----
>>> mouse.2: serial
>******  started child process 7115 (20s/20s)  ******
>----- serial mice -----
>/dev/ttyS0
>----- serial mice end -----
>******  stopped child process 7115 (18s)  ******
>----- serial mice -----
>/dev/ttyS0
>----- serial mice end -----
>>> input.1: joydev mod
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>  I: Bus=0010 Vendor=001f Product=0001 Version=0100
>  N: Name="PC Speaker"
>  P: Phys=isa0061/input0
>  H: Handlers=kbd event0 
>  B: EV=40001 
>  B: SND=6 
>  
>  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
>  N: Name="AT Translated Set 2 keyboard"
>  P: Phys=isa0060/serio0/input0
>  H: Handlers=kbd event1 
>  B: EV=120013 
>  B: KEY=402000000 3802078f840d001 f2ffffdfffefffff fffffffffffffffe 
>  B: MSC=10 
>  B: LED=7 
>  
>  I: Bus=0011 Vendor=0002 Product=0001 Version=0000
>  N: Name="PS/2 Generic Mouse"
>  P: Phys=isa0060/serio1/input0
>  H: Handlers=mouse0 event2 
>  B: EV=7 
>  B: KEY=70000 0 0 0 0 
>  B: REL=3 
>  
>----- /proc/bus/input/devices end -----
>bus = 16, name = PC Speaker
>  handlers = kbd event0
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = AT Translated Set 2 keyboard
>  handlers = kbd event1
>  key = 000000040200000003802078f840d001f2ffffdfffeffffffffffffffffffffe
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = PS/2 Generic Mouse
>  handlers = mouse0 event2
>  key = 00000000000700000000000000000000000000000000000000000000000000000000000000000000
>  rel = 0000000000000003
>  mouse buttons = 3
>  mouse wheels = 0
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 15
>  model		: 4
>  model name	:               Intel(R) Pentium(R) 4 CPU 3.20GHz
>  stepping	: 1
>  cpu MHz		: 3200.668
>  cache size	: 1024 KB
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 5
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall lm constant_tsc pni monitor ds_cpl cid cx16 xtpr
>  bogomips	: 6403.25
>  clflush size	: 64
>  cache_alignment	: 128
>  address sizes	: 36 bits physical, 48 bits virtual
>  power management:
>  
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>/dev/console: major 4, minor 7
>>> fb.1: read info
>>> net.1: get network data
>  net interface: name = eth0, classname = net, path = /class/net/eth0
>    type = 1
>    hw_addr = 00:11:25:ab:41:44
>    GDRVINFO ethtool error: Operation not supported
>  net interface: name = eth1, classname = net, path = /class/net/eth1
>    type = 1
>    hw_addr = 00:11:25:ab:41:45
>    net device: path = /devices/pci0000:00/0000:00:1e.0/0000:04:03.0
>    ethtool driver: e1000
>    ethtool    bus: 0000:04:03.0
>  net interface: name = lo, classname = net, path = /class/net/lo
>    type = 772
>    hw_addr = 00:00:00:00:00:00
>  net interface: name = peth0, classname = net, path = /class/net/peth0
>    type = 1
>    hw_addr = fe:ff:ff:ff:ff:ff
>    net device: path = /devices/pci0000:00/0000:00:03.0/0000:02:01.0
>    ethtool driver: e1000
>    ethtool    bus: 0000:02:01.0
>  net interface: name = sit0, classname = net, path = /class/net/sit0
>    type = 776
>    hw_addr = 00:00:00:00
>  net interface: name = vif0.0, classname = net, path = /class/net/vif0.0
>    type = 1
>    hw_addr = fe:ff:ff:ff:ff:ff
>    GDRVINFO ethtool error: Operation not supported
>  net interface: name = xenbr0, classname = net, path = /class/net/xenbr0
>    type = 1
>    hw_addr = fe:ff:ff:ff:ff:ff
>    GDRVINFO ethtool error: Operation not supported
>  eth0: GLINK ethtool error: Operation not supported
>  eth1: ethtool link state: 0
>  lo: ethtool link state: 1
>  peth0: ethtool link state: 1
>  sit0: GLINK ethtool error: Invalid argument
>  vif0.0: GLINK ethtool error: Operation not supported
>  xenbr0: GLINK ethtool error: Operation not supported
>>> pppoe.1: looking for pppoe
>>> pppoe.2: discovery
>Attempt number 1
>eth0: Sending PADI packet
>eth1: Sending PADI packet
>send failed: Network is down
>peth0: Sending PADI packet
>vif0.0: Sending PADI packet
>xenbr0: Sending PADI packet
>Timeout waiting for PADO packets
>Attempt number 2
>eth0: Sending PADI packet
>eth1: Sending PADI packet
>send failed: Network is down
>peth0: Sending PADI packet
>vif0.0: Sending PADI packet
>xenbr0: Sending PADI packet
>Timeout waiting for PADO packets
>>> 38.1: detecting wlan features
>>> 38.2: assign udi
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4.1: /dev/sda
>  read_block0: 512 bytes (5s, 0us)
>>> int.4.2: /dev/sdb
>  read_block0: 512 bytes (5s, 0us)
>>> int.4: floppy
>>> int.5: bios
>  bios ctrl 0: 22
>>> int.6: mouse
>>> int.15: system info
>  system type:
>  acpi: 1
>>> int.7: hdb
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>  P: /block/hda
>  N: hda
>  S: cdrom
>  S: disk/by-path/pci-0000:00:1f.1-ide-0:0
>  E: ID_TYPE=cd
>  E: ID_MODEL=CD-224E
>  E: ID_SERIAL=
>  E: ID_REVISION=2.9B
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-0:0
>  
>  P: /block/sda
>  N: sda
>  S: disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE
>  S: disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0
>  E: ID_VENDOR=ATA
>  E: ID_MODEL=Maxtor_6Y160M0
>  E: ID_REVISION=YAR5
>  E: ID_SERIAL=SATA_Maxtor_6Y160M0_Y4D64XZE
>  E: ID_TYPE=disk
>  E: ID_BUS=scsi
>  E: ID_PATH=pci-0000:00:1f.2-scsi-0:0:0:0
>  
>  P: /block/sda/sda1
>  N: sda1
>  S: disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE-part1
>  S: disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part1
>  E: ID_VENDOR=ATA
>  E: ID_MODEL=Maxtor_6Y160M0
>  E: ID_REVISION=YAR5
>  E: ID_SERIAL=SATA_Maxtor_6Y160M0_Y4D64XZE
>  E: ID_TYPE=disk
>  E: ID_BUS=scsi
>  E: ID_PATH=pci-0000:00:1f.2-scsi-0:0:0:0
>  E: ID_FS_USAGE=other
>  E: ID_FS_TYPE=swap
>  E: ID_FS_VERSION=2
>  E: ID_FS_UUID=
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/sda/sda2
>  N: sda2
>  S: disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE-part2
>  S: disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part2
>  S: disk/by-uuid/8957fb2f-0c76-470d-8237-55d7278cc220
>  E: ID_VENDOR=ATA
>  E: ID_MODEL=Maxtor_6Y160M0
>  E: ID_REVISION=YAR5
>  E: ID_SERIAL=SATA_Maxtor_6Y160M0_Y4D64XZE
>  E: ID_TYPE=disk
>  E: ID_BUS=scsi
>  E: ID_PATH=pci-0000:00:1f.2-scsi-0:0:0:0
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=reiserfs
>  E: ID_FS_VERSION=3.6
>  E: ID_FS_UUID=8957fb2f-0c76-470d-8237-55d7278cc220
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/sdb
>  N: sdb
>  S: disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XWE
>  S: disk/by-path/pci-0000:00:1f.2-scsi-1:0:0:0
>  E: ID_VENDOR=ATA
>  E: ID_MODEL=Maxtor_6Y160M0
>  E: ID_REVISION=YAR5
>  E: ID_SERIAL=SATA_Maxtor_6Y160M0_Y4D64XWE
>  E: ID_TYPE=disk
>  E: ID_BUS=scsi
>  E: ID_PATH=pci-0000:00:1f.2-scsi-1:0:0:0
>  
>  P: /class/input/event0
>  N: input/event0
>  
>  P: /class/input/event1
>  N: input/event1
>  
>  P: /class/input/event2
>  N: input/event2
>  
>  P: /class/input/mice
>  N: input/mice
>  
>  P: /class/input/mouse0
>  N: input/mouse0
>  
>  P: /class/usb_device/usbdev1.1
>  N: usbdev1.1
>  S: bus/usb/1/1
>  
>  P: /class/usb_device/usbdev2.1
>  N: usbdev2.1
>  S: bus/usb/2/1
>  
>  P: /class/usb_device/usbdev3.1
>  N: usbdev3.1
>  S: bus/usb/3/1
>  
>-----  udevinfo end -----
>/block/hda
>  name: hda
>  links: cdrom, disk/by-path/pci-0000:00:1f.1-ide-0:0
>/block/sda
>  name: sda
>  links: disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE, disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0
>/block/sda/sda1
>  name: sda1
>  links: disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE-part1, disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part1
>/block/sda/sda2
>  name: sda2
>  links: disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE-part2, disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part2, disk/by-uuid/8957fb2f-0c76-470d-8237-55d7278cc220
>/block/sdb
>  name: sdb
>  links: disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XWE, disk/by-path/pci-0000:00:1f.2-scsi-1:0:0:0
>/class/input/event0
>  name: input/event0
>/class/input/event1
>  name: input/event1
>/class/input/event2
>  name: input/event2
>/class/input/mice
>  name: input/mice
>/class/input/mouse0
>  name: input/mouse0
>/class/usb_device/usbdev1.1
>  name: usbdev1.1
>  links: bus/usb/1/1
>/class/usb_device/usbdev2.1
>  name: usbdev2.1
>  links: bus/usb/2/1
>/class/usb_device/usbdev3.1
>  name: usbdev3.1
>  links: bus/usb/3/1
>>> int.13: device names
>>> int.14: soft raid
>----- soft raid devices -----
>----- soft raid devices end -----
>>> int.15: geo
>>> int.16: parent
>  prop read: rdCR.lZF+r4EgHp4 (failed)
>  old prop read: rdCR.lZF+r4EgHp4 (failed)
>  prop read: rdCR.n_7QNeEnh23 (failed)
>  old prop read: rdCR.n_7QNeEnh23 (failed)
>  prop read: rdCR.EMpH5pjcahD (failed)
>  old prop read: rdCR.EMpH5pjcahD (failed)
>  prop read: rdCR.f5u1ucRm+H9 (failed)
>  old prop read: rdCR.f5u1ucRm+H9 (failed)
>  prop read: rdCR.8uRK7LxiIA2 (failed)
>  old prop read: rdCR.8uRK7LxiIA2 (failed)
>  prop read: rdCR.hWmSPAStPX7 (failed)
>  old prop read: rdCR.hWmSPAStPX7 (failed)
>  prop read: rdCR.9N+EecqykME (failed)
>  old prop read: rdCR.9N+EecqykME (failed)
>  prop read: rdCR.DziBbWO85o5 (failed)
>  old prop read: rdCR.DziBbWO85o5 (failed)
>  prop read: rdCR.CxwsZFjVASF (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2578 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_257b (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_25ae (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_25a9 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_25aa (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_25ab (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_25ac (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_25ad (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_244e (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_25a1 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_25a2 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_25b0 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_25a4 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_1075 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1002_5159 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_1076 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0 (failed)
>  prop read: S_Uw.3fyvFV+mbWD (failed)
>  old prop read: S_Uw.3fyvFV+mbWD (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_model_CD_224E (ok)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_Y4D64XZE (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_part1_size_1077479424 (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_8957fb2f_0c76_470d_8237_55d7278cc220 (ok)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_Y4D64XWE (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0 (failed)
>  prop read: k4bc.Y5J22STD1q6 (failed)
>  old prop read: k4bc.Y5J22STD1q6 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0 (failed)
>  prop read: pBe4.JqNdPCGxz5E (failed)
>  old prop read: pBe4.JqNdPCGxz5E (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0 (failed)
>  prop read: uIhY.PK1cbaJHj29 (failed)
>  old prop read: uIhY.PK1cbaJHj29 (failed)
>  prop read: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input (ok)
>  prop read: /org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input (ok)
>  prop read: rdCR.j8NaKXDZtZ6 (failed)
>  old prop read: rdCR.j8NaKXDZtZ6 (failed)
>  prop read: /org/freedesktop/Hal/devices/net_00_11_25_ab_41_44 (failed)
>  prop read: usDW.ndpeucax6V1 (failed)
>  old prop read: usDW.ndpeucax6V1 (failed)
>  prop read: /org/freedesktop/Hal/devices/net_00_11_25_ab_41_45 (failed)
>  prop read: L2Ua.ndpeucax6V1 (failed)
>  old prop read: L2Ua.ndpeucax6V1 (failed)
>  prop read: ZsBS.GQNx7L4uPNA (failed)
>  old prop read: ZsBS.GQNx7L4uPNA (failed)
>  prop read: YyF9.ndpeucax6V1 (failed)
>  old prop read: YyF9.ndpeucax6V1 (failed)
>  prop read: wl2P.nfEXJulusj6 (failed)
>  old prop read: wl2P.nfEXJulusj6 (failed)
>  prop read: fwpj.ndpeucax6V1 (failed)
>  old prop read: fwpj.ndpeucax6V1 (failed)
>  prop read: GzLX.ndpeucax6V1 (failed)
>  old prop read: GzLX.ndpeucax6V1 (failed)
>----- /proc/modules -----
>  af_packet 25356 0 - Live 0xffffffff8826b000
>  joydev 12416 0 - Live 0xffffffff88266000
>  st 43944 0 - Live 0xffffffff8825a000
>  sr_mod 19748 0 - Live 0xffffffff88254000
>  lp 14464 0 - Live 0xffffffff88105000
>  parport_pc 45552 0 - Live 0xffffffff880f8000
>  parport 43916 2 lp,parport_pc, Live 0xffffffff880ec000
>  nfsd 287720 5 - Live 0xffffffff8820c000
>  exportfs 6912 1 nfsd, Live 0xffffffff88209000
>  iptable_filter 3712 0 - Live 0xffffffff88186000
>  ip_tables 22528 1 iptable_filter, Live 0xffffffff88202000
>  nls_utf8 2688 0 - Live 0xffffffff88092000
>  subfs 9856 1 - Live 0xffffffff881fe000
>  bridge 59304 0 - Live 0xffffffff88176000
>  ipv6 289024 10 - Live 0xffffffff881b6000
>  pcc_acpi 16896 0 - Live 0xffffffff881b0000
>  sony_acpi 6420 0 - Live 0xffffffff881ad000
>  button 8736 0 - Live 0xffffffff881a9000
>  battery 12296 0 - Live 0xffffffff881a4000
>  ac 6664 0 - Live 0xffffffff881a1000
>  ide_cd 46496 0 - Live 0xffffffff88194000
>  cdrom 40888 2 sr_mod,ide_cd, Live 0xffffffff88189000
>  e1000 116660 0 - Live 0xffffffff88158000
>  ehci_hcd 37640 0 - Live 0xffffffff8814d000
>  generic 5892 0 [permanent], Live 0xffffffff8814a000
>  i8xx_tco 8740 0 - Live 0xffffffff88146000
>  i2c_i801 10132 0 - Live 0xffffffff88142000
>  i2c_core 25752 1 i2c_i801, Live 0xffffffff8813a000
>  uhci_hcd 37152 0 - Live 0xffffffff8812f000
>  usbcore 145716 3 ehci_hcd,uhci_hcd, Live 0xffffffff8810a000
>  dm_mod 66160 0 - Live 0xffffffff880da000
>  reiserfs 268272 1 - Live 0xffffffff88097000
>  fan 6152 0 - Live 0xffffffff88094000
>  sg 43696 0 - Live 0xffffffff88086000
>  thermal 17804 0 - Live 0xffffffff88080000
>  processor 28624 1 thermal, Live 0xffffffff88078000
>  ata_piix 11780 2 - Live 0xffffffff88074000
>  libata 59400 1 ata_piix, Live 0xffffffff88064000
>  piix 12420 0 [permanent], Live 0xffffffff8805f000
>  sd_mod 20760 3 - Live 0xffffffff88058000
>  scsi_mod 163768 5 st,sr_mod,sg,libata,sd_mod, Live 0xffffffff8802f000
>  ide_disk 19840 0 - Live 0xffffffff88029000
>  ide_core 160920 4 ide_cd,generic,piix,ide_disk, Live 0xffffffff88000000
>----- /proc/modules end -----
>  used irqs: 0,1,2,3,4,5,8,9,12,14,16,17,18,19,20
>=========== end debug info ============
>01: None 00.0: 10105 BIOS
>  [Created at bios.154]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: off
>    Caps Lock: off
>  Serial Port 0: 0x3f8
>  Base Memory: 615 kB
>  PnP BIOS: @@@0000
>  MP spec rev 1.4 info:
>    OEM id: "IBM"
>    Product id: "J/P"
>    1 CPUs (0 disabled)
>  BIOS32 Service Directory Entry: 0xfd5b6
>  SMBIOS Version: 2.33
>  BIOS Info: #0
>    Vendor: "IBM"
>    Version: "-[KEE134AUS-1.34]-"
>    Date: "06/16/2005"
>    Start Address: 0xe0f00
>    ROM Size: 1024 kB
>    Features: 0x0182000000007fcbda90
>      ISA supported
>      PCI supported
>      PnP supported
>      BIOS flashable
>      BIOS shadowing allowed
>      ESCD supported
>      CD boot supported
>      Selectable boot supported
>      BIOS ROM socketed
>      EDD spec supported
>      360kB Floppy supported
>      1.2MB Floppy supported
>      720kB Floppy supported
>      2.88MB Floppy supported
>      Print Screen supported
>      8042 Keyboard Services supported
>      Serial Services supported
>      Printer Services supported
>      CGA/Mono Video supported
>      USB Legacy supported
>      Smart Battery supported
>      BIOS Boot Spec supported
>  System Info: #1
>    Manufacturer: "IBM CORPORATION"
>    Product: "-[84894TY]-"
>    Version: "IBM CORPORATION"
>    Serial: "KDTMY88"
>    UUID: undefined, but settable
>    Wake-up: 0x06 (Power Switch)
>  Board Info: #2
>    Manufacturer: "IBM"
>    Product: "M71IX"
>    Version: "-1"
>    Serial: "J1NKW27P10G"
>  Chassis Info: #3
>    Manufacturer: "IBM"
>    Version: "N/A"
>    Serial: "123456"
>    Asset Tag: "Ingenitor Systems 090905"
>    Type: 0x01 (Other)
>    Bootup State: 0x03 (Safe)
>    Power Supply State: 0x03 (Safe)
>    Thermal State: 0x03 (Safe)
>    Security Status: 0x03 (None)
>    OEM Info: 0x00001234
>  Processor Info: #4
>    Socket: "WMT478/NWD"
>    Socket Type: 0x08 (Slot 1)
>    Socket Status: Populated
>    Type: 0x03 (CPU)
>    Family: 0xb2 (Pentium 4)
>    Manufacturer: "Intel"
>    Version: "E0"
>    Processor ID: 0xbfebfbff00000f41
>    Status: 0x01 (Enabled)
>    Voltage: 1.8 V
>    External Clock: 200 MHz
>    Max. Speed: 3400 MHz
>    Current Speed: 3200 MHz
>    L1 Cache: #10
>    L2 Cache: #11
>  Type 5 Record: #5
>    Data 00: 05 16 05 00 03 04 03 03 08 0c 00 18 05 02 03 06
>    Data 10: 00 07 00 08 00 04
>  Type 6 Record: #6
>    Data 00: 06 0c 06 00 01 01 00 40 05 89 89 04
>    String 1: "DIMM0"
>  Type 6 Record: #7
>    Data 00: 06 0c 07 00 01 23 00 40 05 89 89 04
>    String 1: "DIMM1"
>  Type 6 Record: #8
>    Data 00: 06 0c 08 00 01 45 00 40 05 7f 7f 04
>    String 1: "DIMM2"
>  Type 6 Record: #9
>    Data 00: 06 0c 09 00 01 67 00 40 05 7f 7f 04
>    String 1: "DIMM3"
>  Cache Info: #10
>    Designation: "L1 Cache"
>    Level: L1
>    State: Enabled
>    Mode: 0x00 (Write Through)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x04 (Parity)
>    Type: 0x04 (Data)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 32 kB
>    Current Size: 16 kB
>    Supported SRAM Types: 0x0058 (Burst, Pipeline Burst, Asynchronous)
>    Current SRAM Type: 0x0040 (Asynchronous)
>  Cache Info: #11
>    Designation: "L2 Cache"
>    Level: L2
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x02 (Unknown)
>    Associativity: 0x02 (Unknown)
>    Max. Size: 1024 kB
>    Current Size: 1024 kB
>    Supported SRAM Types: 0x0058 (Burst, Pipeline Burst, Asynchronous)
>    Current SRAM Type: 0x0008 (Burst)
>  Port Connector: #12
>    Type: 0x09 (Serial Port 16550A Compatible)
>    Internal Designator: "J2A1"
>    External Designator: "COM 1"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #13
>    Type: 0x05 (Parallel Port ECP/EPP)
>    Internal Designator: "J3A1"
>    External Designator: "Parallel"
>    External Connector: 0x05 (DB-25 pin female)
>  Port Connector: #14
>    Type: 0x0d (Keyboard Port)
>    Internal Designator: "J1A1"
>    External Designator: "Keyboard"
>    External Connector: 0x14 (Circular DIN-8 male)
>  Port Connector: #15
>    Type: 0x0d (Keyboard Port)
>    Internal Designator: "J1A1"
>    External Designator: "PS/2 Mouse"
>    External Connector: 0x14 (Circular DIN-8 male)
>  System Slot: #16
>    Designation: "PCI Slot #1 - J6B3"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 1
>    Characteristics: 0x0006 (5.0 V, 3.3 V)
>  System Slot: #17
>    Designation: "PCI Slot #2 - J6B2"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 2
>    Characteristics: 0x0006 (5.0 V, 3.3 V)
>  System Slot: #18
>    Designation: "PCI Slot #3 - J7B1"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 3
>    Characteristics: 0x0006 (5.0 V, 3.3 V)
>  System Slot: #19
>    Designation: "PCI Slot #4 - J7B1"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 4
>    Characteristics: 0x0006 (5.0 V, 3.3 V)
>  System Slot: #20
>    Designation: "PCI Slot #5 - J7B1"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x04 (Long)
>    Slot ID: 5
>    Characteristics: 0x0006 (5.0 V, 3.3 V)
>  On Board Devices: #21
>    Ethernet: "82547"
>    Ethernet: "82541"
>    SCSI Controller: "7901"
>    Video: "ATI"
>    Other: "IBM Automatic Server Restart - Machine Type 8482"
>  OEM Strings: #22
>    This is the Intel NBVV-G
>    System Validation Platform
>  System Config Options (Jumpers & Switches) #23:
>    Jumper settings can be described here.
>  Type 15 Record: #24
>    Data 00: 0f 1d 18 00 10 00 00 00 10 00 04 01 09 00 00 00
>    Data 10: 00 00 00 00 01 03 02 08 04 01 02 02 02
>  Physical Memory Array: #25
>    Use: 0x03 (System memory)
>    Location: 0x03 (Motherboard)
>    Slots: 4
>    Max. Size: 4 GB
>    ECC: 0x05 (Single-bit)
>  Memory Device: #26
>    Location: "J5G2"
>    Bank: "DIMM 0"
>    Memory Array: #25
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x12 (DDR)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits (+8 ECC bits)
>    Size: 512 MB
>    Speed: 133 MHz
>  Memory Device: #27
>    Location: "J5G3"
>    Bank: "DIMM 1"
>    Memory Array: #25
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x12 (DDR)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits (+8 ECC bits)
>    Size: 512 MB
>    Speed: 133 MHz
>  Memory Device: #28
>    Location: "J5H1"
>    Bank: "DIMM 2"
>    Memory Array: #25
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x12 (DDR)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 0 bits
>    Size: No Memory Installed
>    Speed: 133 MHz
>  Memory Device: #29
>    Location: "J5H2"
>    Bank: "DIMM 3"
>    Memory Array: #25
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x12 (DDR)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 0 bits
>    Size: No Memory Installed
>    Speed: 133 MHz
>  Memory Array Mapping: #30
>    Memory Array: #25
>    Partition Width: 2
>    Start Address: 0x00000000
>    End Address: 0x40000000
>  Memory Device Mapping: #31
>    Memory Device: #26
>    Array Mapping: #30
>    Start Address: 0x00000000
>    End Address: 0x20000000
>  Memory Device Mapping: #32
>    Memory Device: #27
>    Array Mapping: #30
>    Start Address: 0x20000000
>    End Address: 0x40000000
>  Type 23 Record: #33
>    Data 00: 17 0d 21 00 3f ff ff ff ff ff ff ff ff
>  Hardware Security: #34
>    Power-on Password: 0x00 (Disabled)
>    Keyboard Password: 0x03 (Unknown)
>    Admin Password: 0x01 (Enabled)
>    Front Panel Reset: 0x03 (Unknown)
>  System Power Controls: #35
>    Next Power-on: 23:59:59 31/12
>  Type 26 Record: #36
>    Data 00: 1a 14 24 00 01 63 00 80 00 80 00 80 00 80 00 80
>    Data 10: 00 00 00 00
>    String 1: "Voltage Probe"
>  Type 27 Record: #37
>    Data 00: 1b 0c 25 00 26 00 63 00 00 00 00 00
>  Type 28 Record: #38
>    Data 00: 1c 14 26 00 01 63 00 80 00 80 00 80 00 80 00 80
>    Data 10: 00 00 00 00
>    String 1: "Temperature Probe"
>  Type 29 Record: #39
>    Data 00: 1d 14 27 00 01 63 00 80 00 80 00 80 00 80 00 80
>    Data 10: 00 00 00 00
>    String 1: "Electrical Current Probe"
>  Type 30 Record: #40
>    Data 00: 1e 06 28 00 01 01
>    String 1: "Intel"
>  Type 32 Record: #41
>    Data 00: 20 14 29 00 00 00 00 00 00 00 0c 01 02 03 04 05
>    Data 10: 06 07 08 09
>  Inactive Record: #42
>    Data 00: 7e 04 2a 00
>  Type 129 Record: #43
>    Data 00: 81 1c 2b 00 01 01 02 01 00 00 00 01 00 00 18 01
>    Data 10: 00 02 08 01 00 00 e0 01 01 03 10 01
>    String 1: "Intel_ASF_001"
>    String 2: "Intel_ASF_001"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>02: None 00.0: 10107 System
>  [Created at sys.56]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>03: None 00.0: 10104 FPU
>  [Created at misc.190]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>04: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.204]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>05: None 00.0: 0800 PIC (8259)
>  [Created at misc.217]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0803 RTC (Generic)
>  [Created at misc.239]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0900 Keyboard controller
>  [Created at misc.249]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 10400 PS/2 Controller
>  [Created at misc.302]
>  Unique ID: rdCR.DziBbWO85o5
>  Hardware Class: unknown
>  Model: "PS/2 Controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>10: None 00.0: 10102 Main Memory
>  [Created at memory.59]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0x3bffffff (rw)
>  Memory Size: 960 MB
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>11: PCI 00.0: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2578
>  Unique ID: qLht.wQCYlvLgYRF
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "IBM 82875P/E7210 Memory Controller Hub"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2578 "82875P/E7210 Memory Controller Hub"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02ad 
>  Revision: 0x02
>  Memory Range: 0xd2000000-0xd3ffffff (rw,prefetchable)
>  Module Alias: "pci:v00008086d00002578sv00001014sd000002ADbc06sc00i00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>12: PCI 03.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_257b
>  Unique ID: 3hqH.ScsJ4VYodS8
>  SysFS ID: /devices/pci0000:00/0000:00:03.0
>  SysFS BusID: 0000:00:03.0
>  Hardware Class: bridge
>  Model: "Intel 82875P/E7210 Processor to PCI to CSA Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x257b "82875P/E7210 Processor to PCI to CSA Bridge"
>  Revision: 0x02
>  Module Alias: "pci:v00008086d0000257Bsv00000000sd00000000bc06sc04i00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>13: PCI 1c.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_25ae
>  Unique ID: z8Q3.lk+WaVwzUaA
>  SysFS ID: /devices/pci0000:00/0000:00:1c.0
>  SysFS BusID: 0000:00:1c.0
>  Hardware Class: bridge
>  Model: "Intel 6300ESB 64-bit PCI-X Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x25ae "6300ESB 64-bit PCI-X Bridge"
>  Revision: 0x02
>  Module Alias: "pci:v00008086d000025AEsv00000000sd00000000bc06sc04i00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>14: PCI 1d.0: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_25a9
>  Unique ID: 1GTX.LuhIm4MH+w2
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0
>  SysFS BusID: 0000:00:1d.0
>  Hardware Class: usb controller
>  Model: "IBM 6300ESB USB Universal Host Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x25a9 "6300ESB USB Universal Host Controller"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02ae 
>  Revision: 0x02
>  Driver: "uhci_hcd"
>  I/O Ports: 0x1400-0x141f (rw)
>  IRQ: 17 (no events)
>  Module Alias: "pci:v00008086d000025A9sv00001014sd000002AEbc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>15: PCI 1d.1: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_25aa
>  Unique ID: vayM.sIe2FfT_WJ3
>  SysFS ID: /devices/pci0000:00/0000:00:1d.1
>  SysFS BusID: 0000:00:1d.1
>  Hardware Class: usb controller
>  Model: "IBM 6300ESB USB Universal Host Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x25aa "6300ESB USB Universal Host Controller"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02ae 
>  Revision: 0x02
>  Driver: "uhci_hcd"
>  I/O Ports: 0x1420-0x143f (rw)
>  IRQ: 18 (no events)
>  Module Alias: "pci:v00008086d000025AAsv00001014sd000002AEbc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>16: PCI 1d.4: 0880 System peripheral
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_25ab
>  Unique ID: VZQt.mATuoZgUwn2
>  SysFS ID: /devices/pci0000:00/0000:00:1d.4
>  SysFS BusID: 0000:00:1d.4
>  Hardware Class: unknown
>  Model: "IBM 6300ESB Watchdog Timer"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x25ab "6300ESB Watchdog Timer"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02ae 
>  Revision: 0x02
>  Memory Range: 0xd0000000-0xd000000f (rw,non-prefetchable)
>  Module Alias: "pci:v00008086d000025ABsv00001014sd000002AEbc08sc80i00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>17: PCI 1d.5: 0800 PIC (IO(X)-APIC)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_25ac
>  Unique ID: Muvi.nZax8x5+Dn2
>  SysFS ID: /devices/pci0000:00/0000:00:1d.5
>  SysFS BusID: 0000:00:1d.5
>  Hardware Class: unknown
>  Model: "IBM 6300ESB I/O Advanced Programmable Interrupt Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x25ac "6300ESB I/O Advanced Programmable Interrupt Controller"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02ae 
>  Revision: 0x02
>  Module Alias: "pci:v00008086d000025ACsv00001014sd000002AEbc08sc00i20"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>18: PCI 1d.7: 0c03 USB Controller (EHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_25ad
>  Unique ID: 5YuN.vY3UzQJsdI9
>  SysFS ID: /devices/pci0000:00/0000:00:1d.7
>  SysFS BusID: 0000:00:1d.7
>  Hardware Class: usb controller
>  Model: "IBM 6300ESB USB2 Enhanced Host Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x25ad "6300ESB USB2 Enhanced Host Controller"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02ae 
>  Revision: 0x02
>  Driver: "ehci_hcd"
>  Memory Range: 0xd0000400-0xd00007ff (rw,non-prefetchable)
>  IRQ: 19 (no events)
>  Module Alias: "pci:v00008086d000025ADsv00001014sd000002AEbc0Csc03i20"
>  Driver Info #0:
>    Driver Status: ehci-hcd is active
>    Driver Activation Cmd: "modprobe ehci-hcd"
>  Driver Info #1:
>    Driver Status: ehci_hcd is active
>    Driver Activation Cmd: "modprobe ehci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>19: PCI 1e.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_244e
>  Unique ID: 6NW+.k8q0T1+16w3
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0
>  SysFS BusID: 0000:00:1e.0
>  Hardware Class: bridge
>  Model: "Intel 82801 PCI Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x244e "82801 PCI Bridge"
>  Revision: 0x0a
>  Module Alias: "pci:v00008086d0000244Esv00000000sd00000000bc06sc04i00"
>  Driver Info #0:
>    Driver Status: hw_random is not active
>    Driver Activation Cmd: "modprobe hw_random"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>20: PCI 1f.0: 0601 ISA bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_25a1
>  Unique ID: BUZT.VjPf2GteXE0
>  SysFS ID: /devices/pci0000:00/0000:00:1f.0
>  SysFS BusID: 0000:00:1f.0
>  Hardware Class: bridge
>  Model: "Intel 6300ESB LPC Interface Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x25a1 "6300ESB LPC Interface Controller"
>  Revision: 0x02
>  Module Alias: "pci:v00008086d000025A1sv00000000sd00000000bc06sc01i00"
>  Driver Info #0:
>    Driver Status: i8xx_tco is active
>    Driver Activation Cmd: "modprobe i8xx_tco"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>21: PCI 1f.1: 0101 IDE interface
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_25a2
>  Unique ID: 3p2J.h86_xWlXbO6
>  SysFS ID: /devices/pci0000:00/0000:00:1f.1
>  SysFS BusID: 0000:00:1f.1
>  Hardware Class: storage
>  Model: "IBM 6300ESB PATA Storage Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x25a2 "6300ESB PATA Storage Controller"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02ae 
>  Revision: 0x02
>  Driver: "PIIX_IDE"
>  I/O Ports: 0x1460-0x146f (rw)
>  Memory Range: 0x3c200000-0x3c2003ff (rw,non-prefetchable)
>  IRQ: 16 (20449 events)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  IRQ: 14 (4996 events)
>  Module Alias: "pci:v00008086d000025A2sv00001014sd000002AEbc01sc01i8a"
>  Driver Info #0:
>    Driver Status: piix is active
>    Driver Activation Cmd: "modprobe piix"
>  Driver Info #1:
>    Driver Status: generic is active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>22: PCI 1f.2: 0104 RAID bus controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_25b0
>  Unique ID: w7Y8.XWSRFi_Zoi4
>  SysFS ID: /devices/pci0000:00/0000:00:1f.2
>  SysFS BusID: 0000:00:1f.2
>  Hardware Class: storage
>  Model: "IBM 6300ESB SATA RAID Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x25b0 "6300ESB SATA RAID Controller"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02ae 
>  Revision: 0x02
>  Driver: "ata_piix"
>  I/O Ports: 0x1490-0x1497 (rw)
>  I/O Ports: 0x1484-0x1487 (rw)
>  I/O Ports: 0x1488-0x148f (rw)
>  I/O Ports: 0x1480-0x1483 (rw)
>  I/O Ports: 0x1470-0x147f (rw)
>  IRQ: 16 (20449 events)
>  Module Alias: "pci:v00008086d000025B0sv00001014sd000002AEbc01sc04i8f"
>  Driver Info #0:
>    Driver Status: ata_piix is active
>    Driver Activation Cmd: "modprobe ata_piix"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>23: PCI 1f.3: 0c05 SMBus
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_25a4
>  Unique ID: nS1_.oEsztnmsmFF
>  SysFS ID: /devices/pci0000:00/0000:00:1f.3
>  SysFS BusID: 0000:00:1f.3
>  Hardware Class: unknown
>  Model: "IBM 6300ESB SMBus Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x25a4 "6300ESB SMBus Controller"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02ae 
>  Revision: 0x02
>  Driver: "i801_smbus"
>  I/O Ports: 0x1440-0x145f (rw)
>  IRQ: 5 (no events)
>  Module Alias: "pci:v00008086d000025A4sv00001014sd000002AEbc0Csc05i00"
>  Driver Info #0:
>    Driver Status: i2c_i801 is active
>    Driver Activation Cmd: "modprobe i2c_i801"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>24: PCI 201.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_1075
>  Unique ID: Kat3.L8jTIM_rHPE
>  Parent ID: 3hqH.ScsJ4VYodS8
>  SysFS ID: /devices/pci0000:00/0000:00:03.0/0000:02:01.0
>  SysFS BusID: 0000:02:01.0
>  Hardware Class: network
>  Model: "IBM 82547GI Gigabit Ethernet Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x1075 "82547GI Gigabit Ethernet Controller"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02ae 
>  Driver: "e1000"
>  Device File: peth0
>  Memory Range: 0xd0120000-0xd013ffff (rw,non-prefetchable)
>  Memory Range: 0xd0100000-0xd011ffff (rw,non-prefetchable)
>  I/O Ports: 0x2000-0x2fff (rw)
>  Memory Range: 0x3c100000-0x3c11ffff (ro,prefetchable,disabled)
>  IRQ: 16 (20449 events)
>  HW Address: fe:ff:ff:ff:ff:ff
>  Link detected: yes
>  Module Alias: "pci:v00008086d00001075sv00001014sd000002AEbc02sc00i00"
>  Driver Info #0:
>    Driver Status: e1000 is active
>    Driver Activation Cmd: "modprobe e1000"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #12 (PCI bridge)
>
>25: PCI 402.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1002_5159
>  Unique ID: i_aO.90L+kFsCcY5
>  Parent ID: 6NW+.k8q0T1+16w3
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:04:02.0
>  SysFS BusID: 0000:04:02.0
>  Hardware Class: graphics card
>  Model: "IBM Radeon VE"
>  Vendor: pci 0x1002 "ATI Technologies Inc"
>  Device: pci 0x5159 "Radeon VE"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02c8 
>  Memory Range: 0xe0000000-0xefffffff (rw,prefetchable)
>  I/O Ports: 0x3000-0x30ff (rw)
>  Memory Range: 0xd0200000-0xd020ffff (rw,non-prefetchable)
>  Memory Range: 0xd0260000-0xd027ffff (ro,prefetchable,disabled)
>  IRQ: 3 (no events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Module Alias: "pci:v00001002d00005159sv00001014sd000002C8bc03sc00i00"
>  Driver Info #0:
>    XFree86 v4 Server Module: radeon
>  Driver Info #1:
>    XFree86 v4 Server Module: radeon
>    3D Support: yes
>    Color Depths: 16
>    Extensions: dri
>    Options: 
>  Config Status: cfg=yes, avail=yes, need=yes, active=unknown
>  Attached to: #19 (PCI bridge)
>
>26: PCI 403.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_1076
>  Unique ID: JNkJ.sYfDnw5ZpnE
>  Parent ID: 6NW+.k8q0T1+16w3
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:04:03.0
>  SysFS BusID: 0000:04:03.0
>  Hardware Class: network
>  Model: "IBM 82541GI/PI Gigabit Ethernet Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x1076 "82541GI/PI Gigabit Ethernet Controller"
>  SubVendor: pci 0x1014 "IBM"
>  SubDevice: pci 0x02ae 
>  Driver: "e1000"
>  Device File: eth1
>  Memory Range: 0xd0240000-0xd025ffff (rw,non-prefetchable)
>  Memory Range: 0xd0220000-0xd023ffff (rw,non-prefetchable)
>  I/O Ports: 0x3400-0x343f (rw)
>  Memory Range: 0xd0280000-0xd029ffff (ro,prefetchable,disabled)
>  IRQ: 20 (no events)
>  HW Address: 00:11:25:ab:41:45
>  Link detected: no
>  Module Alias: "pci:v00008086d00001076sv00001014sd000002AEbc02sc00i00"
>  Driver Info #0:
>    Driver Status: e1000 is active
>    Driver Activation Cmd: "modprobe e1000"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #19 (PCI bridge)
>
>27: None 00.0: 0700 Serial controller (16550)
>  [Created at serial.73]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0
>  Unique ID: S_Uw.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS0
>  I/O Ports: 0x3f8-0x3ff (rw)
>  IRQ: 4 (1 event)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>28: IDE 00.0: 10602 CD-ROM
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_model_CD_224E
>  Unique ID: Fffu.2GrYtu0K8EA
>  Parent ID: 3p2J.h86_xWlXbO6
>  SysFS ID: /block/hda
>  SysFS BusID: 0.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  Hardware Class: cdrom
>  Model: "CD-224E"
>  Device: "CD-224E"
>  Revision: "2.9B"
>  Serial ID: ""
>  Driver: "PIIX_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/cdrom
>  Device Files: /dev/hda, /dev/cdrom, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0
>  Device Number: block 3:0
>  Size: 1313760 sectors a 512 bytes
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #21 (IDE interface)
>  Drive Speed: 24
>  Volume ID: "SU1000.001"
>  Application: "SuSE-Linux-CD-OSS-x86_64-10.0#0"
>  Publisher: "Novell, Inc."
>  Preparer: "CD-Team, http://www.suse.de/feedback"
>  Creation date: "2005090720340400"
>  El Torito info: platform 0, bootable
>    Boot Catalog: at sector 0x00b8
>    Id String: "Novell, Inc."
>    Media: none starting at sector 0x00b9
>    Load: 2048 bytes
>
>29: IDE 00.0: 10600 Disk
>  [Created at block.188]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_Y4D64XZE
>  Unique ID: mE25.+fi3dD7HuD7
>  Parent ID: w7Y8.XWSRFi_Zoi4
>  SysFS ID: /block/sda
>  SysFS BusID: 0:0:0:0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0
>  Hardware Class: disk
>  Model: "Maxtor 6Y160M0"
>  Vendor: "Maxtor"
>  Device: "6Y160M0"
>  Revision: "YAR5"
>  Serial ID: "Y4D64XZE"
>  Driver: "ata_piix", "sd"
>  Device File: /dev/disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE
>  Device Files: /dev/sda, /dev/disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0
>  Device Number: block 8:0-8:15
>  BIOS id: 0x80
>  Geometry (Logical): CHS 19457/255/63
>  Size: 312581808 sectors a 512 bytes
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #22 (RAID bus controller)
>
>30: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_part1_size_1077479424
>  Unique ID: 1tKY.SE1wIdpsiiC
>  Parent ID: mE25.+fi3dD7HuD7
>  SysFS ID: /block/sda/sda1
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE-part1
>  Device Files: /dev/sda1, /dev/disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE-part1, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part1
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #29 (Disk)
>
>31: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_8957fb2f_0c76_470d_8237_55d7278cc220
>  Unique ID: U2bc.SE1wIdpsiiC
>  Parent ID: mE25.+fi3dD7HuD7
>  SysFS ID: /block/sda/sda2
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE-part2
>  Device Files: /dev/sda2, /dev/disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XZE-part2, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part2, /dev/disk/by-uuid/8957fb2f-0c76-470d-8237-55d7278cc220
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #29 (Disk)
>
>32: IDE 100.0: 10600 Disk
>  [Created at block.188]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_Y4D64XWE
>  Unique ID: DQI9.43nau4MaQK8
>  Parent ID: w7Y8.XWSRFi_Zoi4
>  SysFS ID: /block/sdb
>  SysFS BusID: 1:0:0:0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0
>  Hardware Class: disk
>  Model: "Maxtor 6Y160M0"
>  Vendor: "Maxtor"
>  Device: "6Y160M0"
>  Revision: "YAR5"
>  Serial ID: "Y4D64XWE"
>  Driver: "ata_piix", "sd"
>  Device File: /dev/disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XWE
>  Device Files: /dev/sdb, /dev/disk/by-id/scsi-SATA_Maxtor_6Y160M0_Y4D64XWE, /dev/disk/by-path/pci-0000:00:1f.2-scsi-1:0:0:0
>  Device Number: block 8:16-8:31
>  BIOS id: 0x81
>  Geometry (Logical): CHS 19457/255/63
>  Size: 312581808 sectors a 512 bytes
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #22 (RAID bus controller)
>
>33: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0
>  Unique ID: k4bc.Y5J22STD1q6
>  Parent ID: 1GTX.LuhIm4MH+w2
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-9-xen uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-9-xen uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.0"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #14 (USB Controller)
>
>34: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0
>  Unique ID: pBe4.JqNdPCGxz5E
>  Parent ID: vayM.sIe2FfT_WJ3
>  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0
>  SysFS BusID: 2-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-9-xen uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-9-xen uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.1"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #15 (USB Controller)
>
>35: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0
>  Unique ID: uIhY.PK1cbaJHj29
>  Parent ID: 5YuN.vY3UzQJsdI9
>  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb3/3-0:1.0
>  SysFS BusID: 3-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-9-xen ehci_hcd EHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-9-xen ehci_hcd"
>  Device: "EHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.7"
>  Driver: "hub"
>  Speed: 480 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #18 (USB Controller)
>
>36: PS/2 00.0: 10800 Keyboard
>  [Created at input.137]
>  UDI: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input
>  Unique ID: EXC1.TBWTwSuMeW2
>  Hardware Class: keyboard
>  Model: "AT Translated Set 2 keyboard"
>  Vendor: int 0x0211 
>  Device: int 0x0001 "AT Translated Set 2 keyboard"
>  Device File: /dev/input/event1
>  Device Number: char 13:65
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>37: PS/2 00.0: 10500 PS/2 Mouse
>  [Created at input.157]
>  UDI: /org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input
>  Unique ID: AH6Q.RgweIoOI2K6
>  Hardware Class: mouse
>  Model: "PS/2 Generic Mouse"
>  Vendor: int 0x0210 
>  Device: int 0x0003 "PS/2 Generic Mouse"
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2
>  Device Number: char 13:63 (char 13:32)
>  Driver Info #0:
>    Buttons: 3
>    Wheels: 0
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>38: None 00.0: 10103 CPU
>  [Created at cpu.290]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: X86-64
>  Vendor: "GenuineIntel"
>  Model: 15.4.1 "Intel(R) Pentium(R) 4 CPU 3.20GHz"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,syscall,lm,constant_tsc,pni,monitor,ds_cpl,cid,cx16,xtpr
>  Clock: 3200 MHz
>  Cache: 1024 kb
>  Units/Processor: 2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>39: None 00.0: 10701 Ethernet
>  [Created at net.111]
>  UDI: /org/freedesktop/Hal/devices/net_00_11_25_ab_41_44
>  Unique ID: usDW.ndpeucax6V1
>  SysFS ID: /class/net/eth0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Device File: eth0
>  HW Address: 00:11:25:ab:41:44
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>40: None 01.0: 10701 Ethernet
>  [Created at net.111]
>  UDI: /org/freedesktop/Hal/devices/net_00_11_25_ab_41_45
>  Unique ID: L2Ua.ndpeucax6V1
>  Parent ID: JNkJ.sYfDnw5ZpnE
>  SysFS ID: /class/net/eth1
>  SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:04:03.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "e1000"
>  Device File: eth1
>  HW Address: 00:11:25:ab:41:45
>  Link detected: no
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #26 (Ethernet controller)
>
>41: None 00.0: 10700 Loopback
>  [Created at net.111]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>42: None 00.0: 10701 Ethernet
>  [Created at net.111]
>  Unique ID: YyF9.ndpeucax6V1
>  Parent ID: Kat3.L8jTIM_rHPE
>  SysFS ID: /class/net/peth0
>  SysFS Device Link: /devices/pci0000:00/0000:00:03.0/0000:02:01.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "e1000"
>  Device File: peth0
>  HW Address: fe:ff:ff:ff:ff:ff
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #24 (Ethernet controller)
>
>43: None 00.0: 10781 Network Interface
>  [Created at net.111]
>  Unique ID: wl2P.nfEXJulusj6
>  SysFS ID: /class/net/sit0
>  Hardware Class: network interface
>  Model: "Network Interface"
>  Device File: sit0
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>44: None 00.0: 10701 Ethernet
>  [Created at net.111]
>  Unique ID: fwpj.ndpeucax6V1
>  SysFS ID: /class/net/vif0.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Device File: vif0.0
>  HW Address: fe:ff:ff:ff:ff:ff
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>45: None 00.0: 10701 Ethernet
>  [Created at net.111]
>  Unique ID: GzLX.ndpeucax6V1
>  SysFS ID: /class/net/xenbr0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Device File: xenbr0
>  HW Address: fe:ff:ff:ff:ff:ff
>  Config Status: cfg=new, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 116395: 49627 | 49628