Attachment 49739 Details for Bug 116655

dmesg output from 10.0RC2 with parport BIOS=SPP, now everything works

dmesg.RC2-with-SPP.out (text/plain), 17.88 KB, created by Ralf Flaxa on 2005-09-13 08:51:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ralf Flaxa

Created: 2005-09-13 08:51:42 UTC

Size: 17.88 KB

patch

obsolete

>Linux version 2.6.13-11-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Sat Sep 10 13:18:02 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
> BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fb930
>On node 0 totalpages: 262128
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32752 pages, LIFO batch:15
>DMI 2.3 present.
>ACPI: RSDP (v000 AMI                                   ) @ 0x000fa9e0
>ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x3fff0000
>ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x3fff0030
>ACPI: MADT (v001 AMIINT VIA_K7   0x00000009 MSFT 0x00000097) @ 0x3fff00c0
>ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: local apic disabled
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: VIA      Product ID: VT5440B      APIC at: 0xFEE00000
>Processor #0 6:10 APIC version 17
>I/O APIC #2 Version 3 at 0xFEC00000.
>Processors: 1
>Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda9 selinux=0    resume=/dev/hda7  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 1533.401 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1033544k/1048512k available (2028k kernel code, 14060k reserved, 700k data, 204k init, 131008k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3069.65 BogoMIPS (lpj=6139314)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
>CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: AMD Athlon(tm) XP 2000+ stepping 00
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1661k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 8c20)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: dee00000-dfefffff
>  PREFETCH window: dad00000-decfffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1126606993.480:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>PCI0 USB1 USB2 USB3 EHCI UAR1  AC9  MC9 ILAN SLPB 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:11.1
>    ACPI-0212: *** Warning: Device is not power manageable
>    ACPI-0402: *** Warning: Unable to derive IRQ for device 0000:00:11.1
>ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
>PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
>Probing IDE interface ide0...
>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
>hda: SAMSUNG SP1604N, ATA DISK drive
>hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 1024KiB
>hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
>ACPI: CPU0 (power states: C1[C1])
>ACPI: Processor [CPU1] (supports 16 throttling states)
>hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: hda9: found reiserfs format "3.6" with standard journal
>ReiserFS: hda9: using ordered data mode
>ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda9: checking transaction log (hda9)
>ReiserFS: hda9: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 2000052k swap on /dev/hda7.  Priority:-1 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>NTFS driver 2.1.23 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>parport0: faking semi-colon
>parport0: Printer, Hewlett-Packard HP LaserJet 1100
>lp0: using parport0 (interrupt-driven).
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA KT266/KY266x/KT333 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>ieee1394: Initialized config rom entry `ip1394'
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]  MMIO=[dffff800-dfffffff]  Max Packet=[2048]
>USB Universal Host Controller Interface driver v2.3
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e000
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 10, io base 0x0000e400
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 15
>PCI: setting IRQ 15 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 15 (level, low) -> IRQ 15
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 15, io base 0x0000e800
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Linux video capture interface: v1.00
>ivtv_tveeprom: module not supported by Novell, setting U taint flag.
>bttv: driver version 0.9.16 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>bttv0: Bt878 (rev 2) at 0000:00:06.0, irq: 10, latency: 32, mmio: 0xdedfe000
>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
>bttv0: using: Hauppauge (bt878) [card=10,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
>tveeprom: Hauppauge: model = 61324, rev = D108, serial# = 1276816
>tveeprom: tuner = Philips FI1216 MK2 (idx = 8, type = 5)
>tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
>tveeprom: audio_processor = MSP3415 (type = 6)
>tveeprom: Hauppauge: model = 61324, rev = D108, serial# = 1276816
>tveeprom: tuner = Philips FI1216 MK2 (idx = 8, type = 5)
>tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
>tveeprom: audio_processor = MSP3415 (type = 6)
>bttv0: using tuner=5
>bttv0: i2c: checking for MSP34xx @ 0x80... found
>msp34xx: init: chip=MSP3410D-B4 +nicam +simple mode=simple
>msp3410: daemon started
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>tvaudio: TV audio decoder + audio/video mux driver
>tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6320,tea6420,tda8425,pic16c54 (PV951),ta8874z
>bttv0: i2c: checking for TDA9887 @ 0x86... not found
> : chip found @ 0xc2 (bt878 #0 [sw])
>tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: registered device radio0
>bttv0: PLL: 28636363 => 35468950 .. ok
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>ehci_hcd 0000:00:10.3: EHCI Host Controller
>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:10.3: irq 5, io mem 0xdffff700
>ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>Driver for 1-wire Dallas network protocol.
>matrox_w1 0000:01:00.0: Matrox G400 GPIO transport layer for 1-wire.
>NET: Registered protocol family 23
>via_ircc: module not supported by Novell, setting U taint flag.
>    ACPI-0212: *** Warning: Device is not power manageable
>via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>eth0: VIA Rhine II at 0x1d800, 00:0c:76:61:32:67, IRQ 11.
>eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001106000000662a]
>usb 1-1: USB disconnect, address 2
>usb 4-1: new high speed USB device using ehci_hcd and address 2
>usb 1-2: new full speed USB device using uhci_hcd and address 4
>SCSI subsystem initialized
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
>usbcore: registered new driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: ec object not found
>pcc_acpi: module not supported by Novell, setting U taint flag.
>  Vendor: OTi       Model: CF CARD Reader    Rev: 2.00
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>  Vendor: OTi       Model: SM CARD Reader    Rev: 2.00
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>  Vendor: OTi       Model: SD CARD Reader    Rev: 2.00
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>  Vendor: OTi       Model: MS CARD Reader    Rev: 2.00
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
>usb-storage: device scan complete
>Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
>Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
>subfs 0.9
>Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>Attached scsi generic sg1 at scsi0, channel 0, id 0, lun 1,  type 0
>Attached scsi generic sg2 at scsi0, channel 0, id 0, lun 2,  type 0
>Attached scsi generic sg3 at scsi0, channel 0, id 0, lun 3,  type 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>subfs: unsuccessful attempt to mount media (256)
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>st: Version 20050501, fixed bufsize 32768, s/g segs 256
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>eth0: no IPv6 routers present
>NET: Registered protocol family 17
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>pnp: Device 00:09 disabled.
>pnp: Device 00:09 activated.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>parport0: faking semi-colon
>parport0: Printer, Hewlett-Packard HP LaserJet 1100
>lp0: using parport0 (interrupt-driven).
>pnp: Device 00:09 disabled.
>pnp: Device 00:09 activated.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>parport0: faking semi-colon
>parport0: Printer, Hewlett-Packard HP LaserJet 1100
>lp0: using parport0 (interrupt-driven).
>via82xx: Assuming DXS channels with 48k fixed sample rate.
>         Please try dxs_support=5 option
>         and report if it works on your machine.
>         For more details, read ALSA-Configuration.txt.
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 15 (level, low) -> IRQ 15
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 not a capable Intel processor
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>powernow-k8: Processor cpuid 6a0 not supported
>eth0: no IPv6 routers present
>mtrr: 0xdc000000,0x2000000 overlaps existing 0xdc000000,0x1000000
>pnp: Device 00:09 disabled.
>pnp: Device 00:09 activated.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>parport0: faking semi-colon
>parport0: Printer, Hewlett-Packard HP LaserJet 1100
>lp0: using parport0 (interrupt-driven).
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>pnp: Device 00:09 disabled.
>pnp: Device 00:09 activated.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>parport0: faking semi-colon
>parport0: Printer, Hewlett-Packard HP LaserJet 1100
>lp0: using parport0 (interrupt-driven).
>ppa: Version 2.07 (for Linux 2.4.x)

Actions: View

Attachments on bug 116655: 49696 | 49697 | 49727 | 49728 | 49729 | 49730 | 49731 | 49739 | 49740 | 49741 | 49775 | 49776 | 49777 | 49779 | 49781 | 49782 | 77247 | 77248 | 77270 | 77297 | 77306