Attachment 49831 Details for Bug 116436

hwinfo

hwinfo.txt (text/plain), 192.26 KB, created by Ulrich Lange on 2005-09-13 20:41:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ulrich Lange

Created: 2005-09-13 20:41:18 UTC

Size: 192.26 KB

patch

obsolete

>============ start debug info ============
>libhd version 11.21 (ia32)
>kernel version is 2.6
>----- /proc/cmdline -----
>  root=/dev/hda2 vga=0x317 selinux=0    resume=/dev/hda1  splash=silent
>----- /proc/cmdline end -----
>debug = 0xff7ffff7
>probe = 0x00138fc4aa17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc)
>shm: attached segment 491522 at 0x40572000
>>> hal.1: read hal data
>  hal: connected to: :1.38
>----- hal device list -----
>  0: udi = '/org/freedesktop/Hal/devices/volume_label_DVDVolume'
>  info.callouts.remove = { 'hald-subfs-mount' }
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hald-subfs-mount' }
>  volume.policy.desired_mount_point = 'DVDVolume'
>  volume.policy.mount_filesystem = 'udf'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_label_DVDVolume'
>  info.product = 'DVDVolume'
>  volume.disc.is_svcd = false
>  volume.disc.is_vcd = false
>  volume.disc.is_videodvd = true
>  volume.disc.is_rewritable = false
>  volume.disc.is_appendable = false
>  volume.disc.is_blank = false
>  volume.disc.has_data = true
>  volume.disc.has_audio = false
>  volume.disc.type = 'dvd_rom'
>  volume.size = 4330029056ull (0x102170000ull)
>  volume.num_blocks = 8457088 (0x810b80)
>  volume.block_size = 2048 (0x800)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = true
>  volume.is_mounted = true
>  volume.mount_point = '/media/cdrom'
>  volume.label = 'DVDVolume'
>  volume.uuid = ''
>  volume.fsversion = ''
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'udf'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_ND_6500A'
>  block.is_volume = true
>  block.minor = 0 (0x0)
>  block.major = 11 (0xb)
>  block.device = '/dev/sr0'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_ND_6500A'
>  linux.sysfs_path_device = '/sys/block/sr0/fakevolume'
>  linux.sysfs_path = '/sys/block/sr0/fakevolume'
>
>  1: udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_ND_6500A'
>  info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' }
>  resmgr.class = 'cdrom'
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' }
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrecorder'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_ND_6500A'
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD__RW_ND_6500A'
>  storage.cdrom.write_speed = 4234 (0x108a)
>  storage.cdrom.read_speed = 4234 (0x108a)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = true
>  storage.cdrom.dvdplusrw = true
>  storage.cdrom.dvdplusr = true
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = true
>  storage.cdrom.dvd = true
>  storage.cdrom.cdrw = true
>  storage.cdrom.cdr = true
>  storage.requires_eject = true
>  storage.hotpluggable = true
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'DVD+-RW ND-6500A'
>  info.vendor = '_NEC'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/ieee1394_guid_d04b481208d89e'
>  storage.lun = 0 (0x0)
>  storage.drive_type = 'cdrom'
>  storage.vendor = '_NEC'
>  storage.model = 'DVD+-RW ND-6500A'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ieee1394'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 11 (0xb)
>  block.device = '/dev/sr0'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/ieee1394_guid_d04b481208d89e_scsi_host_scsi_device_lun0'
>  linux.sysfs_path_device = '/sys/block/sr0'
>  linux.sysfs_path = '/sys/block/sr0'
>
>  2: udi = '/org/freedesktop/Hal/devices/ieee1394_guid_d04b481208d89e_scsi_host_scsi_device_lun0'
>  info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid_d04b481208d89e_scsi_host_scsi_device_lun0'
>  linux.subsystem = 'scsi'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'SCSI Device'
>  scsi.lun = 0 (0x0)
>  scsi.target = 0 (0x0)
>  scsi.bus = 0 (0x0)
>  scsi.host = 0 (0x0)
>  info.parent = '/org/freedesktop/Hal/devices/ieee1394_guid_d04b481208d89e_scsi_host'
>  info.bus = 'scsi'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0/host0/target0:0:0/0:0:0:0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0/host0/target0:0:0/0:0:0:0'
>
>  3: udi = '/org/freedesktop/Hal/devices/ieee1394_guid_d04b481208d89e_scsi_host'
>  info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid_d04b481208d89e_scsi_host'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 0 (0x0)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/ieee1394_guid_d04b481208d89e'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0/host0'
>  linux.sysfs_path = '/sys/class/scsi_host/host0'
>
>  4: udi = '/org/freedesktop/Hal/devices/ieee1394_guid_d04b481208d89e'
>  info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid_d04b481208d89e'
>  linux.subsystem = 'ieee1394'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'LaCie DVDRW FireWire'
>  info.vendor = 'Unknown (0x00d04b)'
>  ieee1394.product = 'LaCie DVDRW FireWire'
>  ieee1394.product_id = 1 (0x1)
>  ieee1394.vendor = 'Unknown (0x00d04b)'
>  ieee1394.version = 66691 (0x10483)
>  ieee1394.specifier_id = 24734 (0x609e)
>  ieee1394.vendor_id = 53323 (0xd04b)
>  ieee1394.guid = 58629568068114590ull (0xd04b481208d89eull)
>  info.parent = '/org/freedesktop/Hal/devices/pci_1033_f2'
>  info.bus = 'ieee1394'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0'
>
>  5: udi = '/org/freedesktop/Hal/devices/ieee1394_guid_4c0107002d3d'
>  info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid_4c0107002d3d'
>  linux.subsystem = 'ieee1394'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Unknown (0x00004c)'
>  info.vendor = 'Unknown (0x00004c)'
>  ieee1394.product = 'Unknown (0x00004c)'
>  ieee1394.product_id = 0 (0x0)
>  ieee1394.vendor = 'Unknown (0x00004c)'
>  ieee1394.version = 1 (0x1)
>  ieee1394.specifier_id = 94 (0x5e)
>  ieee1394.vendor_id = 76 (0x4c)
>  ieee1394.guid = 83567296130365ull (0x4c0107002d3dull)
>  info.parent = '/org/freedesktop/Hal/devices/pci_1033_f2'
>  info.bus = 'ieee1394'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00004c0107002d3d/00004c0107002d3d-0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00004c0107002d3d/00004c0107002d3d-0'
>
>  6: udi = '/org/freedesktop/Hal/devices/pci_1033_f2'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1033_f2'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x00ce)'
>  pci.subsys_vendor = 'NEC Corporation'
>  info.product = 'uPD72874 IEEE1394 OHCI 1.1 3-port PHY-Link Ctrlr'
>  pci.product = 'uPD72874 IEEE1394 OHCI 1.1 3-port PHY-Link Ctrlr'
>  info.vendor = 'NEC Corporation'
>  pci.vendor = 'NEC Corporation'
>  pci.device_protocol = 16 (0x10)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4147 (0x1033)
>  pci.subsys_product_id = 206 (0xce)
>  pci.vendor_id = 4147 (0x1033)
>  pci.product_id = 242 (0xf2)
>  info.linux.driver = 'ohci1394'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_104c_ac51'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0'
>
>  7: udi = '/org/freedesktop/Hal/devices/acpi_SLP'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_SLP'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Sleep Button'
>  button.type = 'sleep'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/sleep/SLP'
>
>  8: udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/power/PWRF'
>
>  9: udi = '/org/freedesktop/Hal/devices/acpi_LID'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_LID'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = true
>  button.state.value = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Lid Switch'
>  button.type = 'lid'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/lid/LID'
>
>  10: udi = '/org/freedesktop/Hal/devices/acpi_ACAD'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_ACAD'
>  linux.hotplug_type = 4 (0x4)
>  ac_adapter.present = true
>  info.capabilities = { 'ac_adapter' }
>  info.category = 'ac_adapter'
>  info.product = 'AC Adapter'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 3 (0x3)
>  linux.acpi_path = '/proc/acpi/ac_adapter/ACAD'
>
>  11: udi = '/org/freedesktop/Hal/devices/acpi_FAN'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_FAN'
>  linux.hotplug_type = 4 (0x4)
>  fan.enabled = false
>  info.capabilities = { 'fan' }
>  info.category = 'fan'
>  info.product = 'Fan'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 2 (0x2)
>  linux.acpi_path = '/proc/acpi/fan/FAN'
>
>  12: udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
>  linux.hotplug_type = 4 (0x4)
>  processor.can_throttle = false
>  processor.number = 0 (0x0)
>  info.capabilities = { 'processor' }
>  info.category = 'processor'
>  info.product = 'Processor'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 1 (0x1)
>  linux.acpi_path = '/proc/acpi/processor/CPU0'
>
>  13: udi = '/org/freedesktop/Hal/devices/acpi_BAT1'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_BAT1'
>  linux.hotplug_type = 4 (0x4)
>  battery.charge_level.percentage = 97 (0x61)
>  battery.charge_level.rate = 0 (0x0)
>  battery.charge_level.last_full = 69218304 (0x4203000)
>  battery.charge_level.current = 67608576 (0x407a000)
>  battery.voltage.current = 16768 (0x4180)
>  battery.reporting.rate = 0 (0x0)
>  battery.reporting.current = 4032 (0xfc0)
>  battery.rechargeable.is_discharging = false
>  battery.rechargeable.is_charging = false
>  battery.is_rechargeable = true
>  battery.charge_level.unit = 'mWh'
>  battery.charge_level.granularity_2 = 473600 (0x73a00)
>  battery.charge_level.granularity_1 = 473600 (0x73a00)
>  battery.charge_level.low = 2960000 (0x2d2a80)
>  battery.charge_level.warning = 4440000 (0x43bfc0)
>  battery.charge_level.design = 59200000 (0x3875200)
>  battery.voltage.design = 14800 (0x39d0)
>  battery.voltage.unit = 'mV'
>  battery.reporting.granularity_2 = 32 (0x20)
>  battery.reporting.granularity_1 = 32 (0x20)
>  battery.reporting.low = 200 (0xc8)
>  battery.reporting.warning = 300 (0x12c)
>  battery.reporting.design = 4000 (0xfa0)
>  battery.reporting.last_full = 4128 (0x1020)
>  battery.reporting.unit = 'mAh'
>  battery.technology = 'LION'
>  battery.serial = '16439'
>  battery.model = 'RTL4$2'
>  battery.vendor = 'SANYO'
>  battery.present = true
>  info.capabilities = { 'battery' }
>  info.category = 'battery'
>  battery.type = 'primary'
>  info.product = 'Battery Bay'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 0 (0x0)
>  linux.acpi_path = '/proc/acpi/battery/BAT1'
>
>  14: udi = '/org/freedesktop/Hal/devices/acpi_BAT2'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_BAT2'
>  linux.hotplug_type = 4 (0x4)
>  battery.present = false
>  info.capabilities = { 'battery' }
>  info.category = 'battery'
>  battery.type = 'primary'
>  info.product = 'Battery Bay'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 0 (0x0)
>  linux.acpi_path = '/proc/acpi/battery/BAT2'
>
>  15: udi = '/org/freedesktop/Hal/devices/volume_part1_size_1077479424'
>  info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_1077479424'
>  volume.partition.msdos_part_table_type = 130 (0x82)
>  info.product = 'Volume (swap)'
>  volume.size = 1077479424ull (0x40390800ull)
>  volume.num_blocks = 2104452 (0x201c84)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 1 (0x1)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = ''
>  volume.fsversion = '2'
>  volume.fsusage = 'other'
>  volume.fstype = 'swap'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_63A63302389'
>  block.is_volume = true
>  block.minor = 1 (0x1)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda1'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_63A63302389'
>  linux.sysfs_path_device = '/sys/block/hda/hda1'
>  linux.sysfs_path = '/sys/block/hda/hda1'
>
>  16: udi = '/org/freedesktop/Hal/devices/volume_uuid_1cdfa418_d6e5_43a8_9e1d_3a46d3b466bc'
>  volume.policy.desired_mount_point = 'idedisk'
>  volume.policy.mount_filesystem = 'reiserfs'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_1cdfa418_d6e5_43a8_9e1d_3a46d3b466bc'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (reiserfs)'
>  volume.size = 18926369280ull (0x468197a00ull)
>  volume.num_blocks = 36965565 (0x2340cbd)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 2 (0x2)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = true
>  volume.mount_point = '/'
>  volume.label = ''
>  volume.uuid = '1cdfa418-d6e5-43a8-9e1d-3a46d3b466bc'
>  volume.fsversion = '3.6'
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'reiserfs'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_63A63302389'
>  block.is_volume = true
>  block.minor = 2 (0x2)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda2'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_63A63302389'
>  linux.sysfs_path_device = '/sys/block/hda/hda2'
>  linux.sysfs_path = '/sys/block/hda/hda2'
>
>  17: udi = '/org/freedesktop/Hal/devices/storage_serial_63A63302389'
>  storage.policy.should_mount = false
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_63A63302389'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_63A63302389'
>  storage.firmware_version = 'DA3OA76A'
>  storage.serial = '63A63302389'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  info.product = 'IC25N020ATDA04-0'
>  storage.removable = false
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
>  storage.drive_type = 'disk'
>  storage.vendor = ''
>  storage.model = 'IC25N020ATDA04-0'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = false
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
>  linux.sysfs_path_device = '/sys/block/hda'
>  linux.sysfs_path = '/sys/block/hda'
>
>  18: udi = '/org/freedesktop/Hal/devices/storage_model_UJDA340'
>  info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' }
>  resmgr.class = 'cdrom'
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' }
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrecorder'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_UJDA340'
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_UJDA340'
>  storage.cdrom.write_speed = 1411 (0x583)
>  storage.cdrom.read_speed = 4234 (0x108a)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = false
>  storage.cdrom.dvdplusrw = false
>  storage.cdrom.dvdplusr = false
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = false
>  storage.cdrom.dvd = false
>  storage.cdrom.cdrw = true
>  storage.cdrom.cdr = true
>  storage.firmware_version = '1.50'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'UJDA340'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'UJDA340'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 22 (0x16)
>  block.device = '/dev/hdc'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
>  linux.sysfs_path_device = '/sys/block/hdc'
>  linux.sysfs_path = '/sys/block/hdc'
>
>  19: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
>  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/timer'
>  linux.device_file = '/dev/snd/timer'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  alsa.device_file = '/dev/snd/timer'
>  info.product = 'ALSA Timer Device'
>  alsa.type = 'timer'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.sysfs_path = '/sys/class/sound/timer'
>
>  20: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'input'
>  resmgr.device = '/dev/input/event2'
>  input.product = 'ImPS/2 Logitech Wheel Mouse'
>  info.product = 'ImPS/2 Logitech Wheel Mouse'
>  linux.device_file = '/dev/input/event2'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event2'
>  info.capabilities = { 'input', 'input.mouse' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  linux.sysfs_path = '/sys/class/input/event2'
>
>  21: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux Port'
>  serio.description = 'i8042 Aux Port'
>  serio.id = 'serio0'
>  info.linux.driver = 'psmouse'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
>
>  22: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input'
>  input.product = 'AT Translated Set 2 keyboard'
>  info.product = 'AT Translated Set 2 keyboard'
>  linux.device_file = '/dev/input/event1'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event1'
>  info.capabilities = { 'input', 'input.keyboard' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.sysfs_path = '/sys/class/input/event1'
>
>  23: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Kbd Port'
>  serio.description = 'i8042 Kbd Port'
>  serio.id = 'serio1'
>  info.linux.driver = 'atkbd'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
>
>  24: udi = '/org/freedesktop/Hal/devices/pci_8086_3575'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_3575'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0xffff)'
>  pci.subsys_vendor = 'Illegal Vendor ID'
>  info.product = '82830 830 Chipset Host Bridge'
>  pci.product = '82830 830 Chipset Host Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 65535 (0xffff)
>  pci.subsys_product_id = 65535 (0xffff)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 13685 (0x3575)
>  info.linux.driver = 'agpgart-intel'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>
>  25: udi = '/org/freedesktop/Hal/devices/pci_1002_4c59'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1002_4c59'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x001a)'
>  pci.subsys_vendor = 'Hewlett-Packard Company'
>  info.product = 'Radeon Mobility M6 LY'
>  pci.product = 'Radeon Mobility M6 LY'
>  info.vendor = 'ATI Technologies Inc'
>  pci.vendor = 'ATI Technologies Inc'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 3 (0x3)
>  pci.subsys_vendor_id = 4156 (0x103c)
>  pci.subsys_product_id = 26 (0x1a)
>  pci.vendor_id = 4098 (0x1002)
>  pci.product_id = 19545 (0x4c59)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_3576'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0'
>
>  26: udi = '/org/freedesktop/Hal/devices/pci_8086_3576'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_3576'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82830 830 Chipset AGP Bridge'
>  pci.product = '82830 830 Chipset AGP Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 13686 (0x3576)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>
>  27: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-9-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.0'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>
>  28: udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Vendor Specific Interface'
>  usb.interface.protocol = 255 (0xff)
>  usb.interface.subclass = 255 (0xff)
>  usb.interface.class = 255 (0xff)
>  usb.interface.number = 0 (0x0)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 3 (0x3)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1085 (0x43d)
>  usb.product_id = 138 (0x8a)
>  usb.vendor = 'Lexmark International, Inc.'
>  usb.product = 'USB Vendor Specific Interface'
>  usb.device_revision_bcd = 1 (0x1)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.serial = '20050201-084445'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0'
>
>  29: udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if1_printer_noserial'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if1_printer_noserial'
>  printer.description = 'Lexmark 4200 Series'
>  printer.product = '4200 Series'
>  printer.vendor = 'Lexmark '
>  info.vendor = 'Lexmark '
>  linux.device_file = '/dev/usb/lp0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 2 (0x2)
>  printer.physical_device = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if1'
>  printer.device = '/dev/usb/lp0'
>  info.product = '4200 Series'
>  info.capabilities = { 'printer' }
>  info.category = 'printer'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1'
>  linux.sysfs_path = '/sys/class/usb/lp0'
>
>  30: udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if1'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if1'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Printer Interface'
>  usb.interface.protocol = 2 (0x2)
>  usb.interface.subclass = 1 (0x1)
>  usb.interface.class = 7 (0x7)
>  usb.interface.number = 1 (0x1)
>  info.linux.driver = 'usblp'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 3 (0x3)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1085 (0x43d)
>  usb.product_id = 138 (0x8a)
>  usb.vendor = 'Lexmark International, Inc.'
>  usb.product = 'USB Printer Interface'
>  usb.device_revision_bcd = 1 (0x1)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.serial = '20050201-084445'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1'
>
>  31: udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if2_hiddev'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if2_hiddev'
>  hiddev.application_pages = { 'Unknown page 0x1000001' }
>  hiddev.product = 'Lexmark  4200 Series'
>  linux.device_file = '/dev/hiddev0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 2 (0x2)
>  hiddev.device = '/dev/hiddev0'
>  info.product = 'Lexmark  4200 Series'
>  info.capabilities = { 'hiddev' }
>  info.category = 'hiddev'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2'
>  linux.sysfs_path = '/sys/class/usb/hiddev0'
>
>  32: udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if2'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if2'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB HID Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 3 (0x3)
>  usb.interface.number = 2 (0x2)
>  info.linux.driver = 'usbhid'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 3 (0x3)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1085 (0x43d)
>  usb.product_id = 138 (0x8a)
>  usb.vendor = 'Lexmark International, Inc.'
>  usb.product = 'USB HID Interface'
>  usb.device_revision_bcd = 1 (0x1)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.serial = '20050201-084445'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2'
>
>  33: udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 512 (0x200)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '20050201-084445'
>  usb_device.linux.device_number = 2 (0x2)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 1 (0x1)
>  info.product = '4200 Series'
>  usb_device.product = '4200 Series'
>  info.vendor = 'Lexmark International, Inc.'
>  usb_device.vendor = 'Lexmark International, Inc.'
>  usb_device.product_id = 138 (0x8a)
>  usb_device.vendor_id = 1085 (0x43d)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 0 (0x0)
>  usb_device.num_interfaces = 3 (0x3)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2'
>
>  34: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.0'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-9-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-9-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2482'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>
>  35: udi = '/org/freedesktop/Hal/devices/pci_8086_2482'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2482'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x001a)'
>  pci.subsys_vendor = 'Hewlett-Packard Company'
>  info.product = '82801CA/CAM USB (Hub #1)'
>  pci.product = '82801CA/CAM USB (Hub #1)'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4156 (0x103c)
>  pci.subsys_product_id = 26 (0x1a)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9346 (0x2482)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
>
>  36: udi = '/org/freedesktop/Hal/devices/pci_125d_1988_alsa_playback_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_125d_1988_alsa_playback_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D0p'
>  linux.device_file = '/dev/snd/pcmC0D0p'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'Allegro ALSA Playback Device'
>  alsa.type = 'playback'
>  alsa.device_id = 'Allegro'
>  alsa.card_id = 'PCI'
>  alsa.device = 0 (0x0)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  info.parent = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  alsa.device_file = '/dev/snd/pcmC0D0p'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D0p'
>
>  37: udi = '/org/freedesktop/Hal/devices/pci_125d_1988_alsa_capture_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_125d_1988_alsa_capture_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D0c'
>  linux.device_file = '/dev/snd/pcmC0D0c'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'Allegro ALSA Capture Device'
>  alsa.type = 'capture'
>  alsa.device_id = 'Allegro'
>  alsa.card_id = 'PCI'
>  alsa.device = 0 (0x0)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  info.parent = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  alsa.device_file = '/dev/snd/pcmC0D0c'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D0c'
>
>  38: udi = '/org/freedesktop/Hal/devices/pci_125d_1988_alsa_control_0__1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_125d_1988_alsa_control_0__1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/controlC0'
>  linux.device_file = '/dev/snd/controlC0'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'PCI ALSA Control Device'
>  alsa.card_id = 'PCI'
>  alsa.type = 'control'
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  info.parent = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  alsa.device_file = '/dev/snd/controlC0'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/controlC0'
>
>  39: udi = '/org/freedesktop/Hal/devices/pci_125d_1988_oss_mixer_0__1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_125d_1988_oss_mixer_0__1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/mixer'
>  linux.device_file = '/dev/mixer'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'Allegro OSS Control Device'
>  oss.type = 'mixer'
>  oss.device_id = 'Allegro'
>  oss.card_id = 'PCI'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  info.parent = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  oss.device_file = '/dev/mixer'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/mixer'
>
>  40: udi = '/org/freedesktop/Hal/devices/pci_125d_1988_oss_pcm_0_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_125d_1988_oss_pcm_0_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/dsp'
>  linux.device_file = '/dev/dsp'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'Allegro OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 0 (0x0)
>  oss.device_id = 'Allegro'
>  oss.card_id = 'PCI'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  info.parent = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  oss.device_file = '/dev/dsp'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/dsp'
>
>  41: udi = '/org/freedesktop/Hal/devices/pci_125d_1988_oss_pcm_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_125d_1988_oss_pcm_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/audio'
>  linux.device_file = '/dev/audio'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'Allegro OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 0 (0x0)
>  oss.device_id = 'Allegro'
>  oss.card_id = 'PCI'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  info.parent = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  oss.device_file = '/dev/audio'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/audio'
>
>  42: udi = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  info.udi = '/org/freedesktop/Hal/devices/pci_125d_1988'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x001a)'
>  pci.subsys_vendor = 'Hewlett-Packard Company'
>  info.product = 'ES1988 Allegro-1'
>  pci.product = 'ES1988 Allegro-1'
>  info.vendor = 'ESS Technology'
>  pci.vendor = 'ESS Technology'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 4156 (0x103c)
>  pci.subsys_product_id = 26 (0x1a)
>  pci.vendor_id = 4701 (0x125d)
>  pci.product_id = 6536 (0x1988)
>  info.linux.driver = 'Maestro3'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:03.0'
>
>  43: udi = '/org/freedesktop/Hal/devices/pci_11c1_450'
>  info.udi = '/org/freedesktop/Hal/devices/pci_11c1_450'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0450)'
>  pci.subsys_vendor = 'AMBIT Microsystem Corp.'
>  info.product = 'LT WinModem'
>  pci.product = 'LT WinModem'
>  info.vendor = 'Agere Systems'
>  pci.vendor = 'Agere Systems'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 128 (0x80)
>  pci.device_class = 7 (0x7)
>  pci.subsys_vendor_id = 5224 (0x1468)
>  pci.subsys_product_id = 1104 (0x450)
>  pci.vendor_id = 4545 (0x11c1)
>  pci.product_id = 1104 (0x450)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:04.0'
>
>  44: udi = '/org/freedesktop/Hal/devices/pci_104c_ac51_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_104c_ac51_0'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x001a)'
>  pci.subsys_vendor = 'Hewlett-Packard Company'
>  info.product = 'PCI1420'
>  pci.product = 'PCI1420'
>  info.vendor = 'Texas Instruments'
>  pci.vendor = 'Texas Instruments'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 7 (0x7)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 4156 (0x103c)
>  pci.subsys_product_id = 26 (0x1a)
>  pci.vendor_id = 4172 (0x104c)
>  pci.product_id = 44113 (0xac51)
>  info.linux.driver = 'yenta_cardbus'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.0'
>
>  45: udi = '/org/freedesktop/Hal/devices/pci_104c_ac51'
>  info.udi = '/org/freedesktop/Hal/devices/pci_104c_ac51'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x001a)'
>  pci.subsys_vendor = 'Hewlett-Packard Company'
>  info.product = 'PCI1420'
>  pci.product = 'PCI1420'
>  info.vendor = 'Texas Instruments'
>  pci.vendor = 'Texas Instruments'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 7 (0x7)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 4156 (0x103c)
>  pci.subsys_product_id = 26 (0x1a)
>  pci.vendor_id = 4172 (0x104c)
>  pci.product_id = 44113 (0xac51)
>  info.linux.driver = 'yenta_cardbus'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:05.1'
>
>  46: udi = '/org/freedesktop/Hal/devices/net_00_c0_9f_05_d0_38'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_c0_9f_05_d0_38'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 827301679160ull (0xc09f05d038ull)
>  info.product = 'Networking Interface'
>  net.interface_up = true
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 3 (0x3)
>  net.address = '00:c0:9f:05:d0:38'
>  net.interface = 'eth0'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_1038'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_1038'
>  linux.sysfs_path = '/sys/class/net/eth0'
>
>  47: udi = '/org/freedesktop/Hal/devices/pci_8086_1038'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_1038'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x001a)'
>  pci.subsys_vendor = 'Hewlett-Packard Company'
>  info.product = '82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller'
>  pci.product = '82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4156 (0x103c)
>  pci.subsys_product_id = 26 (0x1a)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 4152 (0x1038)
>  info.linux.driver = 'e100'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:08.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:08.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:08.0'
>
>  48: udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801 Mobile PCI Bridge'
>  pci.product = '82801 Mobile PCI Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9288 (0x2448)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>
>  49: udi = '/org/freedesktop/Hal/devices/pci_8086_248c'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_248c'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801CAM ISA Bridge (LPC)'
>  pci.product = '82801CAM ISA Bridge (LPC)'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9356 (0x248c)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
>
>  50: udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_0_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-disk'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
>
>  51: udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_248a_ide_1_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 1 (0x1)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_248a'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/ide1/1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide1/1.0'
>
>  52: udi = '/org/freedesktop/Hal/devices/pci_8086_248a'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_248a'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x001a)'
>  pci.subsys_vendor = 'Hewlett-Packard Company'
>  info.product = '82801CAM IDE U100'
>  pci.product = '82801CAM IDE U100'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 138 (0x8a)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4156 (0x103c)
>  pci.subsys_product_id = 26 (0x1a)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9354 (0x248a)
>  info.linux.driver = 'PIIX_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
>
>  53: udi = '/org/freedesktop/Hal/devices/pci_8086_2483'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2483'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x001a)'
>  pci.subsys_vendor = 'Hewlett-Packard Company'
>  info.product = '82801CA/CAM SMBus Controller'
>  pci.product = '82801CA/CAM SMBus Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 5 (0x5)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4156 (0x103c)
>  pci.subsys_product_id = 26 (0x1a)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9347 (0x2483)
>  info.linux.driver = 'i801_smbus'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'
>
>  54: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:00'
>  linux.sysfs_path = '/sys/devices/pnp0/00:00'
>
>  55: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:01'
>  linux.sysfs_path = '/sys/devices/pnp0/00:01'
>
>  56: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT DMA Controller'
>  pnp.description = 'AT DMA Controller'
>  pnp.id = 'PNP0200'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:02'
>  linux.sysfs_path = '/sys/devices/pnp0/00:02'
>
>  57: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT Real-Time Clock'
>  pnp.description = 'AT Real-Time Clock'
>  pnp.id = 'PNP0b00'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:03'
>  linux.sysfs_path = '/sys/devices/pnp0/00:03'
>
>  58: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Math Coprocessor'
>  pnp.description = 'Math Coprocessor'
>  pnp.id = 'PNP0c04'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:04'
>  linux.sysfs_path = '/sys/devices/pnp0/00:04'
>
>  59: udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT-style speaker sound'
>  pnp.description = 'AT-style speaker sound'
>  pnp.id = 'PNP0800'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:05'
>  linux.sysfs_path = '/sys/devices/pnp0/00:05'
>
>  60: udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.id = 'PNP0303'
>  info.linux.driver = 'i8042 kbd'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:06'
>  linux.sysfs_path = '/sys/devices/pnp0/00:06'
>
>  61: udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0f13'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PS/2 Port for PS/2-style Mice'
>  pnp.description = 'PS/2 Port for PS/2-style Mice'
>  pnp.id = 'PNP0f13'
>  info.linux.driver = 'i8042 aux'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:07'
>  linux.sysfs_path = '/sys/devices/pnp0/00:07'
>
>  62: udi = '/org/freedesktop/Hal/devices/pnp_PNP0a05'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a05'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Generic ACPI Bus'
>  pnp.description = 'Generic ACPI Bus'
>  pnp.id = 'PNP0a05'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:08'
>  linux.sysfs_path = '/sys/devices/pnp0/00:08'
>
>  63: udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'ECP printer port'
>  pnp.description = 'ECP printer port'
>  pnp.id = 'PNP0401'
>  info.linux.driver = 'parport_pc'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:09'
>  linux.sysfs_path = '/sys/devices/pnp0/00:09'
>
>  64: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'modem'
>  resmgr.device = '/dev/ttyS0'
>  linux.device_file = '/dev/ttyS0'
>  linux.subsystem = 'tty'
>  linux.hotplug_type = 2 (0x2)
>  info.product = '16550A-compatible COM port'
>  serial.type = 'platform'
>  serial.port = 0 (0x0)
>  serial.device = '/dev/ttyS0'
>  serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.capabilities = { 'serial' }
>  info.category = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.sysfs_path = '/sys/class/tty/ttyS0'
>
>  65: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = '16550A-compatible COM port'
>  pnp.description = '16550A-compatible COM port'
>  pnp.id = 'PNP0501'
>  info.linux.driver = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0a'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0a'
>
>  66: udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PC standard floppy disk controller'
>  pnp.description = 'PC standard floppy disk controller'
>  pnp.id = 'PNP0700'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0b'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0b'
>
>  67: udi = '/org/freedesktop/Hal/devices/pnp_HWPc224'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_HWPc224'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PnP Device (HWPc224)'
>  pnp.id = 'HWPc224'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0c'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0c'
>
>  68: udi = '/org/freedesktop/Hal/devices/pnp_HWPc209'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_HWPc209'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PnP Device (HWPc209)'
>  pnp.id = 'HWPc209'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0d'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0d'
>
>  69: udi = '/org/freedesktop/Hal/devices/computer'
>  storage.policy.default.mount_option.exec = true
>  storage.policy.default.mount_option.pamconsole = true
>  storage.policy.default.mount_option.noauto = true
>  storage.policy.default.managed_keyword.secondary = 'kudzu'
>  storage.policy.default.managed_keyword.primary = 'managed'
>  storage.policy.default.use_managed_keyword = true
>  storage.policy.default.mount_root = '/media'
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-set-power-save' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', 'b' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'SetPowerSave' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
>  info.addons = { 'hald-addon-acpi' }
>  system.product = 'HP OmniBook PC HP OmniBook 6100 EB'
>  system.vendor = 'Hewlett-Packard'
>  smbios.chassis.type = 'Notebook'
>  smbios.chassis.manufacturer = 'Hewlett-Packard'
>  smbios.system.uuid = '0061E940-3DD3-D511-A9C4-00C09F05D038'
>  smbios.system.serial = 'TW20607941'
>  smbios.system.version = 'HP OmniBook 6100 EB'
>  smbios.system.product = 'HP OmniBook PC'
>  smbios.system.manufacturer = 'Hewlett-Packard'
>  smbios.bios.release_date = '02/27/02'
>  smbios.bios.version = 'EB.M2.20'
>  smbios.bios.vendor = 'Phoenix Technologies Ltd.'
>  power_management.acpi.linux.version = '20050408'
>  power_management.type = 'acpi'
>  power_management.is_enabled = true
>  system.formfactor = 'laptop'
>  system.kernel.machine = 'i686'
>  system.kernel.version = '2.6.13-9-default'
>  system.kernel.name = 'Linux'
>  info.udi = '/org/freedesktop/Hal/devices/computer'
>  info.product = 'Computer'
>  linux.sysfs_path_device = '(none)'
>  info.bus = 'unknown'
>----- hal device list end -----
>>> floppy.1: get nvram
>>> floppy.2: klog info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>/dev/mem[0x400, 256]: mmap(, 4096,,,, 0x0) ok
>/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok
>  bios: 1 disks
>  bios: 637k low mem
>/dev/mem[0x9f400, 1]: mmap(, 4096,,,, 0x9f000) ok
>/dev/mem[0x9f400, 2048]: mmap(, 4096,,,, 0x9f000) ok
>  bios: EBDA 0x00800 bytes at 0x9f400
>>> bios.2: rom
>----- SMBIOS Entry Point 0xf6640 - 0xf665e -----
>  f6640  5f 53 4d 5f 0b 1f 02 03 73 00 00 00 00 00 00 00  "_SM_....s......."
>  f6650  5f 44 4d 49 5f 60 52 05 80 fb 0e 00 28 00 00  "_DMI_`R.....(.."
>----- SMBIOS Entry Point end -----
>/dev/mem[0xefb80, 1362]: mmap(, 8192,,,, 0xef000) ok
>----- SMBIOS Structure Table 0xefb80 - 0xf00d1 -----
>  efb80  00 14 00 00 01 02 06 e3 03 07 90 5f 00 00 00 00  "..........._...."
>  efb90  00 00 87 01 50 68 6f 65 6e 69 78 20 54 65 63 68  "....Phoenix Tech"
>  efba0  6e 6f 6c 6f 67 69 65 73 20 4c 74 64 2e 00 45 42  "nologies Ltd..EB"
>  efbb0  2e 4d 32 2e 32 30 20 00 30 32 2f 32 37 2f 30 32  ".M2.20 .02/27/02"
>  efbc0  20 20 00 00 01 19 01 00 01 02 03 04 00 61 e9 40  "  ...........a.@"
>  efbd0  3d d3 d5 11 a9 c4 00 c0 9f 05 d0 38 06 48 65 77  "=..........8.Hew"
>  efbe0  6c 65 74 74 2d 50 61 63 6b 61 72 64 00 48 50 20  "lett-Packard.HP "
>  efbf0  4f 6d 6e 69 42 6f 6f 6b 20 50 43 20 20 20 20 20  "OmniBook PC     "
>  efc00  20 20 20 20 20 20 20 20 20 20 20 00 48 50 20 4f  "           .HP O"
>  efc10  6d 6e 69 42 6f 6f 6b 20 36 31 30 30 20 45 42 20  "mniBook 6100 EB "
>  efc20  20 20 20 20 20 20 20 20 20 20 00 54 57 32 30 36  "          .TW206"
>  efc30  30 37 39 34 31 00 00 02 08 02 00 01 02 03 04 48  "07941..........H"
>  efc40  65 77 6c 65 74 74 2d 50 61 63 6b 61 72 64 00 48  "ewlett-Packard.H"
>  efc50  50 20 4f 6d 6e 69 42 6f 6f 6b 20 50 43 20 20 20  "P OmniBook PC   "
>  efc60  20 20 20 20 20 20 00 36 31 30 30 45 42 00 4e 6f  "      .6100EB.No"
>  efc70  6e 65 00 00 03 11 03 00 01 0a 02 03 04 03 03 03  "ne.............."
>  efc80  03 34 12 00 00 48 65 77 6c 65 74 74 2d 50 61 63  ".4...Hewlett-Pac"
>  efc90  6b 61 72 64 00 4e 2f 41 00 4e 6f 6e 65 00 4e 6f  "kard.N/A.None.No"
>  efca0  20 41 73 73 65 74 20 54 61 67 00 00 04 23 04 00  " Asset Tag...#.."
>  efcb0  01 03 11 02 b1 06 00 00 ff f9 83 03 03 02 00 00  "................"
>  efcc0  ee 02 e8 03 41 08 08 00 09 00 ff ff 00 00 00 55  "....A..........U"
>  efcd0  31 00 47 65 6e 75 69 6e 65 49 6e 74 65 6c 00 50  "1.GenuineIntel.P"
>  efce0  65 6e 74 69 75 6d 28 52 29 20 49 49 49 2d 4d 00  "entium(R) III-M."
>  efcf0  00 05 14 05 00 03 04 03 03 08 0c 00 18 05 02 02  "................"
>  efd00  06 00 07 00 04 00 00 06 0c 06 00 01 01 85 00 05  "................"
>  efd10  89 89 00 44 49 4d 4d 2d 31 00 00 06 0c 07 00 01  "...DIMM-1......."
>  efd20  23 85 00 05 88 88 00 44 49 4d 4d 2d 32 00 00 07  "#......DIMM-2..."
>  efd30  13 08 00 01 88 01 10 00 10 00 58 00 40 00 00 02  "..........X.@..."
>  efd40  02 02 4c 31 20 43 61 63 68 65 00 00 07 13 09 00  "..L1 Cache......"
>  efd50  01 a9 01 00 02 00 02 58 00 08 00 00 02 02 02 4c  ".......X.......L"
>  efd60  32 20 43 61 63 68 65 00 00 08 09 0a 00 01 18 02  "2 Cache........."
>  efd70  08 09 4a 31 39 00 43 4f 4d 20 31 00 00 08 09 0b  "..J19.COM 1....."
>  efd80  00 01 19 02 05 05 4a 32 33 00 50 61 72 61 6c 6c  "......J23.Parall"
>  efd90  65 6c 00 00 08 09 0c 00 01 00 02 14 0d 4a 31 31  "el...........J11"
>  efda0  00 4b 65 79 62 6f 61 72 64 00 00 08 09 0d 00 01  ".Keyboard......."
>  efdb0  00 02 14 0d 4a 31 32 00 50 53 2f 32 20 4d 6f 75  "....J12.PS/2 Mou"
>  efdc0  73 65 00 00 09 0d 0e 00 01 06 05 02 04 00 00 06  "se.............."
>  efdd0  00 50 43 49 20 53 6c 6f 74 20 4a 31 31 00 00 09  ".PCI Slot J11..."
>  efde0  0d 0f 00 01 06 05 02 04 00 00 06 00 50 43 49 20  "............PCI "
>  efdf0  53 6c 6f 74 20 4a 31 32 00 00 09 0d 10 00 01 06  "Slot J12........"
>  efe00  05 02 04 00 00 06 00 50 43 49 20 53 6c 6f 74 20  ".......PCI Slot "
>  efe10  4a 31 33 00 00 0a 0a 11 00 83 01 87 02 81 03 41  "J13............A"
>  efe20  54 49 20 4d 4f 42 49 4c 49 54 59 20 50 36 20 41  "TI MOBILITY P6 A"
>  efe30  47 50 20 56 47 41 00 45 53 53 20 31 39 38 38 20  "GP VGA.ESS 1988 "
>  efe40  50 43 49 20 41 75 64 69 6f 00 4e 53 20 4c 50 43  "PCI Audio.NS LPC"
>  efe50  00 00 0b 05 12 00 07 48 65 77 6c 65 74 74 2d 50  ".......Hewlett-P"
>  efe60  61 63 6b 61 72 64 20 4f 6d 6e 69 42 6f 6f 6b 20  "ackard OmniBook "
>  efe70  53 65 72 69 65 73 00 53 65 72 76 69 63 65 20 49  "Series.Service I"
>  efe80  44 3a 20 31 32 30 36 31 00 24 4d 4f 44 45 4c 3a  "D: 12061.$MODEL:"
>  efe90  20 46 33 32 36 30 00 24 4f 53 3a 20 ff ff 00 24  " F3260.$OS: ...$"
>  efea0  4c 4f 43 41 4c 3a 20 41 42 44 00 24 4f 50 54 49  "LOCAL: ABD.$OPTI"
>  efeb0  4f 4e 3a 20 20 20 20 00 24 44 43 3a 20 20 00 00  "ON:    .$DC:  .."
>  efec0  0c 05 13 00 01 4a 75 6d 70 65 72 20 73 65 74 74  ".....Jumper sett"
>  efed0  69 6e 67 73 20 63 61 6e 20 62 65 20 64 65 73 63  "ings can be desc"
>  efee0  72 69 62 65 64 20 68 65 72 65 2e 00 00 0d 16 14  "ribed here......"
>  efef0  00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  eff00  00 00 00 65 6e 7c 55 53 7c 69 73 6f 38 38 35 39  "...en|US|iso8859"
>  eff10  2d 31 00 00 0f 17 15 00 10 00 00 00 10 00 80 01  "-1.............."
>  eff20  00 00 00 00 00 00 00 00 01 00 02 00 00 10 0f 16  "................"
>  eff30  00 03 03 03 00 00 08 00 fe ff 02 00 00 00 11 1b  "................"
>  eff40  17 00 16 00 ff ff 20 00 20 00 00 02 09 01 01 02  "...... . ......."
>  eff50  03 80 00 00 00 00 00 00 00 4d 31 00 42 61 6e 6b  ".........M1.Bank"
>  eff60  20 30 00 00 11 1b 18 00 16 00 ff ff 20 00 20 00  " 0.......... . ."
>  eff70  00 01 09 01 01 02 03 80 00 00 00 00 00 00 00 4d  "...............M"
>  eff80  32 00 42 61 6e 6b 20 31 00 00 13 0f 19 00 00 00  "2.Bank 1........"
>  eff90  00 00 ff ff 0b 00 16 00 02 00 00 14 13 1a 00 00  "................"
>  effa0  00 00 00 ff ff 07 00 17 00 19 00 ff ff ff 00 00  "................"
>  effb0  14 13 1b 00 00 00 08 00 ff ff 0b 00 18 00 19 00  "................"
>  effc0  ff ff ff 00 00 17 0d 1c 00 3f ff ff ff ff ff ff  ".........?......"
>  effd0  ff ff 00 00 18 05 1d 00 77 00 00 19 09 1e 00 12  "........w......."
>  effe0  31 23 59 59 00 00 1a 14 1f 00 01 63 00 80 00 80  "1#YY.......c...."
>  efff0  00 80 00 80 00 80 00 00 00 00 56 6f 6c 74 61 67  "..........Voltag"
>  f0000  65 20 50 72 6f 62 65 00 00 1b 0c 20 00 21 00 63  "e Probe.... .!.c"
>  f0010  00 00 00 00 00 00 00 1c 14 21 00 01 63 00 80 00  ".........!..c..."
>  f0020  80 00 80 00 80 00 80 00 00 00 00 54 65 6d 70 65  "...........Tempe"
>  f0030  72 61 74 75 72 65 20 50 72 6f 62 65 00 00 1d 14  "rature Probe...."
>  f0040  22 00 01 63 00 80 00 80 00 80 00 80 00 80 00 00  ""..c............"
>  f0050  00 00 45 6c 65 63 74 72 69 63 61 6c 20 43 75 72  "..Electrical Cur"
>  f0060  72 65 6e 74 20 50 72 6f 62 65 00 00 1e 06 23 00  "rent Probe....#."
>  f0070  01 01 49 6e 74 65 6c 00 00 20 14 24 00 00 00 00  "..Intel.. .$...."
>  f0080  00 00 00 0c 01 02 03 04 05 06 07 08 09 00 00 80  "................"
>  f0090  0f 25 00 48 50 14 45 42 ee 45 00 f0 93 00 00 00  ".%.HP.EB.E......"
>  f00a0  8c 24 26 00 00 00 00 00 00 60 01 7d 00 7c 01 7d  ".$&......`.}.|.}"
>  f00b0  00 00 00 01 ff ff ff ff ff ff ff ff 00 00 00 00  "................"
>  f00c0  00 00 00 00 00 00 7e 04 27 00 00 00 7f 04 28 00  "......~.'.....(."
>  f00d0  00 00  ".."
>----- SMBIOS Structure Table end -----
>  type 0x00 [0x0000]: 00 14 00 00 01 02 06 e3 03 07 90 5f 00 00 00 00 00 00 87 01
>       str1: "Phoenix Technologies Ltd."
>       str2: "EB.M2.20"
>       str3: "02/27/02"
>  type 0x01 [0x0001]: 01 19 01 00 01 02 03 04 00 61 e9 40 3d d3 d5 11 a9 c4 00 c0 9f 05 d0 38 06
>       str1: "Hewlett-Packard"
>       str2: "HP OmniBook PC"
>       str3: "HP OmniBook 6100 EB"
>       str4: "TW20607941"
>  type 0x02 [0x0002]: 02 08 02 00 01 02 03 04
>       str1: "Hewlett-Packard"
>       str2: "HP OmniBook PC"
>       str3: "6100EB"
>       str4: "None"
>  type 0x03 [0x0003]: 03 11 03 00 01 0a 02 03 04 03 03 03 03 34 12 00 00
>       str1: "Hewlett-Packard"
>       str2: "N/A"
>       str3: "None"
>       str4: "No Asset Tag"
>  type 0x04 [0x0004]: 04 23 04 00 01 03 11 02 b1 06 00 00 ff f9 83 03 03 02 00 00 ee 02 e8 03 41 08 08 00 09 00 ff ff 00 00 00
>       str1: "U1"
>       str2: "GenuineIntel"
>       str3: "Pentium(R) III-M"
>  type 0x05 [0x0005]: 05 14 05 00 03 04 03 03 08 0c 00 18 05 02 02 06 00 07 00 04
>  type 0x06 [0x0006]: 06 0c 06 00 01 01 85 00 05 89 89 00
>       str1: "DIMM-1"
>  type 0x06 [0x0007]: 06 0c 07 00 01 23 85 00 05 88 88 00
>       str1: "DIMM-2"
>  type 0x07 [0x0008]: 07 13 08 00 01 88 01 10 00 10 00 58 00 40 00 00 02 02 02
>       str1: "L1 Cache"
>  type 0x07 [0x0009]: 07 13 09 00 01 a9 01 00 02 00 02 58 00 08 00 00 02 02 02
>       str1: "L2 Cache"
>  type 0x08 [0x000a]: 08 09 0a 00 01 18 02 08 09
>       str1: "J19"
>       str2: "COM 1"
>  type 0x08 [0x000b]: 08 09 0b 00 01 19 02 05 05
>       str1: "J23"
>       str2: "Parallel"
>  type 0x08 [0x000c]: 08 09 0c 00 01 00 02 14 0d
>       str1: "J11"
>       str2: "Keyboard"
>  type 0x08 [0x000d]: 08 09 0d 00 01 00 02 14 0d
>       str1: "J12"
>       str2: "PS/2 Mouse"
>  type 0x09 [0x000e]: 09 0d 0e 00 01 06 05 02 04 00 00 06 00
>       str1: "PCI Slot J11"
>  type 0x09 [0x000f]: 09 0d 0f 00 01 06 05 02 04 00 00 06 00
>       str1: "PCI Slot J12"
>  type 0x09 [0x0010]: 09 0d 10 00 01 06 05 02 04 00 00 06 00
>       str1: "PCI Slot J13"
>  type 0x0a [0x0011]: 0a 0a 11 00 83 01 87 02 81 03
>       str1: "ATI MOBILITY P6 AGP VGA"
>       str2: "ESS 1988 PCI Audio"
>       str3: "NS LPC"
>  type 0x0b [0x0012]: 0b 05 12 00 07
>       str1: "Hewlett-Packard OmniBook Series"
>       str2: "Service ID: 12061"
>       str3: "$MODEL: F3260"
>       str4: "$OS:"
>       str5: "$LOCAL: ABD"
>       str6: "$OPTION:"
>       str7: "$DC:"
>  type 0x0c [0x0013]: 0c 05 13 00 01
>       str1: "Jumper settings can be described here."
>  type 0x0d [0x0014]: 0d 16 14 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>       str1: "en|US|iso8859-1"
>  type 0x0f [0x0015]: 0f 17 15 00 10 00 00 00 10 00 80 01 00 00 00 00 00 00 00 00 01 00 02
>  type 0x10 [0x0016]: 10 0f 16 00 03 03 03 00 00 08 00 fe ff 02 00
>  type 0x11 [0x0017]: 11 1b 17 00 16 00 ff ff 20 00 20 00 00 02 09 01 01 02 03 80 00 00 00 00 00 00 00
>       str1: "M1"
>       str2: "Bank 0"
>  type 0x11 [0x0018]: 11 1b 18 00 16 00 ff ff 20 00 20 00 00 01 09 01 01 02 03 80 00 00 00 00 00 00 00
>       str1: "M2"
>       str2: "Bank 1"
>  type 0x13 [0x0019]: 13 0f 19 00 00 00 00 00 ff ff 0b 00 16 00 02
>  type 0x14 [0x001a]: 14 13 1a 00 00 00 00 00 ff ff 07 00 17 00 19 00 ff ff ff
>  type 0x14 [0x001b]: 14 13 1b 00 00 00 08 00 ff ff 0b 00 18 00 19 00 ff ff ff
>  type 0x17 [0x001c]: 17 0d 1c 00 3f ff ff ff ff ff ff ff ff
>  type 0x18 [0x001d]: 18 05 1d 00 77
>  type 0x19 [0x001e]: 19 09 1e 00 12 31 23 59 59
>  type 0x1a [0x001f]: 1a 14 1f 00 01 63 00 80 00 80 00 80 00 80 00 80 00 00 00 00
>       str1: "Voltage Probe"
>  type 0x1b [0x0020]: 1b 0c 20 00 21 00 63 00 00 00 00 00
>  type 0x1c [0x0021]: 1c 14 21 00 01 63 00 80 00 80 00 80 00 80 00 80 00 00 00 00
>       str1: "Temperature Probe"
>  type 0x1d [0x0022]: 1d 14 22 00 01 63 00 80 00 80 00 80 00 80 00 80 00 00 00 00
>       str1: "Electrical Current Probe"
>  type 0x1e [0x0023]: 1e 06 23 00 01 01
>       str1: "Intel"
>  type 0x20 [0x0024]: 20 14 24 00 00 00 00 00 00 00 0c 01 02 03 04 05 06 07 08 09
>  type 0x80 [0x0025]: 80 0f 25 00 48 50 14 45 42 ee 45 00 f0 93 00
>  type 0x8c [0x0026]: 8c 24 26 00 00 00 00 00 00 60 01 7d 00 7c 01 7d 00 00 00 01 ff ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00
>  type 0x7e [0x0027]: 7e 04 27 00
>>> bios.3: smp
>/dev/mem[0x9fc00, 1024]: mmap(, 4096,,,, 0x9f000) ok
>----- BIOS data 0x00400 - 0x004ff -----
>  400  f8 03 f8 02 00 00 00 00 78 03 00 00 00 00 40 9f  "........x.....@."
>  410  27 44 00 7d 02 28 00 00 00 00 32 00 32 00 75 16  "'D.}.(....2.2.u."
>  420  6c 26 61 1e 77 11 34 05 34 05 33 04 36 07 0d 1c  "l&a.w.4.4.3.6..."
>  430  0d 1c 00 00 00 00 00 00 00 00 00 00 00 00 00 80  "................"
>  440  1b 00 ff 01 01 00 00 a0 c8 54 80 00 00 a0 00 00  ".........T......"
>  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  00 00 00 d4 03 29 30 03 00 00 d8 00 49 40 08 00  ".....)0.....I@.."
>  470  00 00 00 00 01 01 00 00 14 14 14 00 01 01 01 01  "................"
>  480  1e 00 3e 00 2f 10 00 60 f9 11 0b 81 52 00 00 04  "..>./..`....R..."
>  490  04 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00  "................"
>  4a0  00 00 00 00 00 00 00 00 d4 1c 00 c0 00 00 00 00  "................"
>  4b0  00 00 00 00 00 00 20 1b 00 00 00 00 00 00 00 00  "...... ........."
>  4c0  40 01 00 01 00 00 f0 01 f6 03 e0 04 0e 10 08 04  "@..............."
>  4d0  1f 08 00 00 10 d1 84 00 c8 00 00 00 00 00 00 00  "................"
>  4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- BIOS data end -----
>----- EBDA 0x9f400 - 0x9fbff -----
>  9f400  02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f410  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f420  00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00  "................"
>  9f430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f440  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f460  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f470  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f480  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f490  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f500  00 00 00 00 ca 02 40 04 00 00 00 00 00 00 00 00  "......@........."
>  9f510  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f520  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f530  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f540  f9 00 20 18 00 00 20 18 00 00 00 00 00 00 00 00  ".. ... ........."
>  9f550  00 02 00 00 00 0d 00 00 00 90 00 00 80 00 01 00  "................"
>  9f560  00 0d 09 00 00 02 00 80 00 00 00 00 00 00 00 00  "................"
>  9f570  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f580  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f590  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f5f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f600  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f610  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f620  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f630  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f640  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f650  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f660  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f670  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f680  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f690  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f6f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f700  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f710  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f720  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f730  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f740  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f750  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f760  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f770  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f780  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f790  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f7f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f800  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f810  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f820  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f830  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f840  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f850  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f860  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f870  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f880  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f890  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f8f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f900  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f910  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f920  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f930  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f940  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f950  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f960  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f970  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f980  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f990  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9f9f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fa90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9faa0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fab0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fac0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fad0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fae0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9faf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fb90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fba0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbe0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fbf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- EBDA end -----
>>> bios.4: vbe
>  klog: pci config type 1
>/dev/mem[0xc0000, 3]: mmap(, 4096,,,, 0xc0000) ok
>/dev/mem[0xc0000, 57344]: mmap(, 57344,,,, 0xc0000) ok
>/dev/mem[0x0, 4096]: mmap(, 4096,,,, 0x0) ok
>  vbe: int 10h points to c000:1c44: fb fc 50 53 5b 58 80 fc
>>> bios.4.1: vbe info
>>> bios.5: 32
>  bios32: valid SD header at 0xf6660 (size 0x10, rev 0), SD at 0xfd7f2
>>> sys.1: cpu
>  vmware check: 0
>>> misc.9: kernel log
>----- kernel log -----
>  <5>Linux version 2.6.13-9-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Wed Sep 7 08:33:36 UTC 2005
>  <6>BIOS-provided physical RAM map:
>  <4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
>  <4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
>  <4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>  <4> BIOS-e820: 0000000000100000 - 000000002ff60000 (usable)
>  <4> BIOS-e820: 000000002ff60000 - 000000002ff73c00 (ACPI data)
>  <4> BIOS-e820: 000000002ff73c00 - 000000002ff80000 (ACPI NVS)
>  <4> BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved)
>  <4> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
>  <4> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>  <5>0MB HIGHMEM available.
>  <5>767MB LOWMEM available.
>  <7>On node 0 totalpages: 196448
>  <7>  DMA zone: 4096 pages, LIFO batch:1
>  <7>  Normal zone: 192352 pages, LIFO batch:31
>  <7>  HighMem zone: 0 pages, LIFO batch:1
>  <6>DMI present.
>  <7>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6610
>  <7>ACPI: RSDT (v001 PTLTD  EBRSDT   0x02200000  LTP 0x00000000) @ 0x2ff682e4
>  <7>ACPI: FADT (v001 QUANTA EBmador  0x02200000 RT2  0x00000001) @ 0x2ff73b64
>  <7>ACPI: BOOT (v001 PTLTD  EBBFTBL$ 0x02200000  LTP 0x00000001) @ 0x2ff73bd8
>  <7>ACPI: DSDT (v001 HP-MCD EB DSDT  0x02200000 MSFT 0x0100000d) @ 0x00000000
>  <6>ACPI: PM-Timer IO Port: 0x1008
>  <6>ACPI: local apic disabled
>  <4>Allocating PCI resources starting at 30000000 (gap: 30000000:cfb80000)
>  <4>Built 1 zonelists
>  <5>Kernel command line: root=/dev/hda2 vga=0x317 selinux=0    resume=/dev/hda1  splash=silent
>  <6>bootsplash: silent mode.
>  <6>Initializing CPU#0
>  <4>PID hash table entries: 4096 (order: 12, 65536 bytes)
>  <4>Detected 996.851 MHz processor.
>  <6>Using pmtmr for high-res timesource
>  <4>Console: colour dummy device 80x25
>  <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>  <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>  <6>Memory: 773200k/785792k available (2028k kernel code, 12064k reserved, 700k data, 204k init, 0k highmem)
>  <4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>  <4>Calibrating delay using timer specific routine.. 1995.16 BogoMIPS (lpj=3990322)
>  <6>Security Framework v1.0.0 initialized
>  <6>SELinux:  Disabled at boot.
>  <4>Mount-cache hash table entries: 512
>  <7>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>  <7>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>  <6>CPU: L1 I cache: 16K, L1 D cache: 16K
>  <6>CPU: L2 cache: 512K
>  <7>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
>  <6>Intel machine check architecture supported.
>  <6>Intel machine check reporting enabled on CPU#0.
>  <6>mtrr: v2.0 (20020519)
>  <4>CPU: Intel(R) Pentium(R) III Mobile CPU      1000MHz stepping 01
>  <6>Enabling fast FPU save and restore... done.
>  <6>Enabling unmasked SIMD FPU exception support... done.
>  <6>Checking 'hlt' instruction... OK.
>  <6>checking if image is initramfs... it is
>  <6>Freeing initrd memory: 1713k freed
>  <6>ACPI: Looking for DSDT in initrd... not found!
>  <4> not found!
>  <4>ACPI: setting ELCR to 0200 (from 0420)
>  <6>NET: Registered protocol family 16
>  <6>ACPI: bus type pci registered
>  <6>PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2
>  <6>PCI: Using configuration type 1
>  <6>ACPI: Subsystem revision 20050408
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: Using PIC for interrupt routing
>  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6)
>  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
>  <4>ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
>  <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled.
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <4>PCI: Probing PCI hardware (bus 00)
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>  <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>  <7>Boot video device is 0000:01:00.0
>  <6>PCI: Transparent bridge - 0000:00:1e.0
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <6>ACPI: Embedded Controller [EC0] (gpe 28)
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>  <6>ACPI: Power Resource [PFAN] (off)
>  <6>Linux Plug and Play Support v0.97 (c) Adam Belay
>  <6>pnp: PnP ACPI init
>  <6>pnp: PnP ACPI: found 14 devices
>  <6>PCI: Using ACPI for IRQ routing
>  <6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>  <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>  <6>PCI: Bridge: 0000:00:01.0
>  <6>  IO window: 2000-2fff
>  <6>  MEM window: d0100000-d01fffff
>  <6>  PREFETCH window: d8000000-dfffffff
>  <4>PCI: Bus 3, cardbus bridge: 0000:02:05.0
>  <4>  IO window: 00004000-00004fff
>  <4>  IO window: 00005000-00005fff
>  <4>  PREFETCH window: 30000000-31ffffff
>  <4>  MEM window: 34000000-35ffffff
>  <4>PCI: Bus 7, cardbus bridge: 0000:02:05.1
>  <4>  IO window: 00006000-00006fff
>  <4>  IO window: 00007000-00007fff
>  <4>  PREFETCH window: 32000000-33ffffff
>  <4>  MEM window: 36000000-37ffffff
>  <6>PCI: Bridge: 0000:00:1e.0
>  <6>  IO window: 3000-3fff
>  <6>  MEM window: d0200000-d02fffff
>  <6>  PREFETCH window: 30000000-33ffffff
>  <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>  <4>PCI: setting IRQ 10 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:02:05.0 to 64
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>  <6>ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:02:05.1 to 64
>  <6>Simple Boot Flag at 0x36 set to 0x1
>  <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>  <5>apm: overridden by ACPI.
>  <6>audit: initializing netlink socket (disabled)
>  <4>audit(1126685706.900:1): initialized
>  <4>Total HugeTLB memory allocated, 0
>  <5>VFS: Disk quotas dquot_6.5.1
>  <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>  <6>Initializing Cryptographic API
>  <6>vesafb: framebuffer at 0xd8000000, mapped to 0xf0880000, using 6144k, total 16384k
>  <6>vesafb: mode is 1024x768x16, linelength=2048, pages=9
>  <6>vesafb: protected mode interface info at c000:51d9
>  <6>vesafb: scrolling: redraw
>  <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>  <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>  <4>Console: switching to colour frame buffer device 127x44
>  <6>fb0: VESA VGA frame buffer device
>  <6>isapnp: Scanning for PnP cards...
>  <6>isapnp: No Plug & Play device found
>  <6>Real Time Clock Driver v1.12
>  <6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
>  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <4>ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered
>  <6>Floppy drive(s): fd0 is 1.44M
>  <6>FDC 0 is a National Semiconductor PC87306
>  <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>  <6>loop: loaded (max 8 devices)
>  <6>mice: PS/2 mouse device common for all mice
>  <6>input: PC Speaker
>  <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>  <6>md: bitmap version 3.38
>  <6>NET: Registered protocol family 2
>  <4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>  <4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>  <4>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>  <6>TCP: Hash tables configured (established 131072 bind 65536)
>  <6>TCP reno registered
>  <6>NET: Registered protocol family 1
>  <4>Using IPI Shortcut mode
>  <6>input: AT Translated Set 2 keyboard on isa0060/serio0
>  <4>ACPI wakeup devices: 
>  <4> LID  SLP USB1  HUB  LAN ESSM MPC1 MPC2 
>  <6>ACPI: (supports S0 S3 S4 S5)
>  <6>Freeing unused kernel memory: 204k freed
>  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  <6>ICH3M: IDE controller at PCI slot 0000:00:1f.1
>  <4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>  <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>  <4>PCI: setting IRQ 5 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>  <6>ICH3M: chipset revision 1
>  <6>ICH3M: not 100% native mode: will probe irqs later
>  <6>    ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:DMA, hdb:pio
>  <6>    ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:pio, hdd:pio
>  <7>Probing IDE interface ide0...
>  <4>hda: IC25N020ATDA04-0, ATA DISK drive
>  <6>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
>  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  <6>hda: max request size: 128KiB
>  <6>hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63, UDMA(100)
>  <6>hda: cache flushes not supported
>  <6> hda: hda1 hda2
>  <7>Probing IDE interface ide1...
>  <4>hdc: UJDA340, ATAPI CD/DVD-ROM drive
>  <4>ide1 at 0x170-0x177,0x376 on irq 15
>  <6>ACPI: CPU0 (power states: C1[C1] C2[C2])
>  <6>ACPI: Thermal Zone [THRM] (40 C)
>  <6>hdc: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
>  <6>Uniform CD-ROM driver Revision: 3.20
>  <6>ACPI: Fan [FAN] (off)
>  <4>Attempting manual resume
>  <3>swsusp: Suspend partition has wrong signature?
>  <5>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
>  <5>ReiserFS: hda2: using ordered data mode
>  <5>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>  <5>ReiserFS: hda2: checking transaction log (hda2)
>  <5>ReiserFS: hda2: Using r5 hash to sort names
>  <6>md: Autodetecting RAID arrays.
>  <6>md: autorun ...
>  <6>md: ... autorun DONE.
>  <6>Adding 1052216k swap on /dev/hda1.  Priority:-1 extents:1
>  <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>  <6>parport: PnPBIOS parport detected.
>  <6>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>  <6>lp0: using parport0 (interrupt-driven).
>  <6>Linux agpgart interface v0.101 (c) Dave Jones
>  <6>agpgart: Detected an Intel 830M Chipset.
>  <6>agpgart: AGP aperture is 256M @ 0xe0000000
>  <6>NET: Registered protocol family 10
>  <6>Disabled Privacy Extensions on device c036b920(lo)
>  <6>IPv6 over IPv4 tunneling driver
>  <6>usbcore: registered new driver usbfs
>  <6>usbcore: registered new driver hub
>  <6>hw_random hardware driver 1.0.0 loaded
>  <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>  <4>ip6_tables: (C) 2000-2002 Netfilter core team
>  <6>USB Universal Host Controller Interface driver v2.3
>  <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>  <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>  <6>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>  <6>hub 1-0:1.0: USB hub found
>  <6>hub 1-0:1.0: 2 ports detected
>  <3>shpchp: shpc_init : shpc_cap_offset == 0
>  <3>shpchp: shpc_init : shpc_cap_offset == 0
>  <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>  <6>usb 1-2: new full speed USB device using uhci_hcd and address 2
>  <6>ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <6>Yenta: CardBus bridge found at 0000:02:05.0 [103c:001a]
>  <6>Yenta: Enabling burst memory read transactions
>  <6>Yenta: Using INTVAL to route CSC interrupts to PCI
>  <6>Yenta: Routing CardBus interrupts to PCI
>  <6>Yenta TI: socket 0000:02:05.0, mfunc 0x012c1272, devctl 0x66
>  <6>e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
>  <6>e100: Copyright(c) 1999-2005 Intel Corporation
>  <6>Yenta: ISA IRQ mask 0x0818, PCI irq 10
>  <6>Socket status: 30000006
>  <6>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>  <6>cs: IO port probe 0x3000-0x3fff: clean.
>  <6>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>  <6>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>  <6>ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>  <6>Yenta: CardBus bridge found at 0000:02:05.1 [103c:001a]
>  <6>Yenta: Using INTVAL to route CSC interrupts to PCI
>  <6>Yenta: Routing CardBus interrupts to PCI
>  <6>Yenta TI: socket 0000:02:05.1, mfunc 0x012c1272, devctl 0x66
>  <6>Yenta: ISA IRQ mask 0x0818, PCI irq 10
>  <6>Socket status: 30000006
>  <6>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>  <6>cs: IO port probe 0x3000-0x3fff: clean.
>  <6>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>  <6>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>  <6>ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>  <6>e100: eth0: e100_probe: addr 0xd0200000, irq 10, MAC addr 00:C0:9F:05:D0:38
>  <4>ip_tables: (C) 2000-2002 Netfilter core team
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <4>PCI: Enabling device 0000:02:03.0 (0000 -> 0001)
>  <6>ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>  <4>ip_conntrack version 2.1 (6139 buckets, 49112 max) - 248 bytes per conntrack
>  <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x043D pid 0x008A
>  <6>usbcore: registered new driver usblp
>  <6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>  <6>usbcore: registered new driver hiddev
>  <6>hiddev96: USB HID v1.00 Device [Lexmark  4200 Series] on usb-0000:00:1d.0-2
>  <6>usbcore: registered new driver usbhid
>  <6>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>  <6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>  <6>cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
>  <6>cs: IO port probe 0xc00-0xcff: clean.
>  <6>cs: IO port probe 0x820-0x8ff: clean.
>  <6>cs: IO port probe 0xa00-0xaff: clean.
>  <6>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>  <6>cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
>  <6>cs: IO port probe 0xc00-0xcff: clean.
>  <6>cs: IO port probe 0x820-0x8ff: clean.
>  <6>cs: IO port probe 0xa00-0xaff: clean.
>  <6>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>  <6>NET: Registered protocol family 17
>  <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>  <6>ACPI: AC Adapter [ACAD] (on-line)
>  <6>ACPI: Battery Slot [BAT1] (battery present)
>  <6>ACPI: Battery Slot [BAT2] (battery absent)
>  <6>ACPI: Power Button (FF) [PWRF]
>  <6>ACPI: Lid Switch [LID]
>  <6>ACPI: Sleep Button (CM) [SLP]
>  <6>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>  <6>IA-32 Microcode Update Driver v1.14 unregistered
>  <4>pcc_acpi: module not supported by Novell, setting U taint flag.
>  <7>eth0: no IPv6 routers present
>  <6>bootsplash: status on console 0 changed to on
>  <4>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.1.1.50 DST=224.0.0.251 LEN=102 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=82 
>  <4>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.1.1.50 DST=224.0.0.251 LEN=102 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=82 
>  <4>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.1.1.50 DST=224.0.0.251 LEN=102 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=82 
>  <7>ieee1394: Initialized config rom entry `ip1394'
>  <6>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>  <4>PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
>  <6>ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:07:00.0 to 64
>  <4>ohci1394: fw-host0: Unexpected PCI resource length of 1000!
>  <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[36000000-360007ff]  Max Packet=[2048]
>  <7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00004c0107002d3d]
>  <3>ieee1394: Error parsing configrom for node 0-00:1023
>  <7>ieee1394: Node changed: 0-00:1023 -> 0-01:1023
>  <7>ieee1394: Node added: ID:BUS[0-00:1023]  GUID[00d04b481208d89e]
>  <5>SCSI subsystem initialized
>  <6>sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
>  <6>scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
>  <6>ieee1394: sbp2: Logged into SBP-2 device
>  <7>ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
>  <5>  Vendor: _NEC      Model: DVD+-RW ND-6500A  Rev: 2.22
>  <5>  Type:   CD-ROM                             ANSI SCSI revision: 02
>  <4>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>  <7>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
>  <5>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
>  <7>spurious 8259A interrupt: IRQ7.
>  <6>subfs 0.9
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/rmmod lp" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport " -----
>----- return code: ? -----
>>> misc.1.3: read floppy
>  read_block0: open(/dev/fd0) timed out
>misc.floppy: removing floppy entry 2 (timed out)
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>  0000-001f : dma1
>  0020-0021 : pic1
>  0040-0043 : timer0
>  0050-0053 : timer1
>  0060-006f : keyboard
>  0070-0077 : rtc
>  0080-008f : dma page reg
>  00a0-00a1 : pic2
>  00c0-00df : dma2
>  00f0-00ff : fpu
>  0170-0177 : ide1
>  01f0-01f7 : ide0
>  02f8-02ff : serial
>  0376-0376 : ide1
>  0378-037a : parport0
>  03c0-03df : vesafb
>  03f2-03f5 : floppy
>  03f6-03f6 : ide0
>  03f7-03f7 : floppy DIR
>  03f8-03ff : serial
>  0778-077a : parport0
>  0cf8-0cff : PCI conf1
>  1000-107f : 0000:00:1f.0
>    1000-107f : motherboard
>      1000-1003 : PM1a_EVT_BLK
>      1004-1005 : PM1a_CNT_BLK
>      1008-100b : PM_TMR
>      1010-1015 : ACPI CPU throttle
>      1020-1020 : PM2_CNT_BLK
>      1028-102b : GPE0_BLK
>      102c-102f : GPE1_BLK
>  1180-11bf : 0000:00:1f.0
>    1180-11bf : motherboard
>  1800-181f : 0000:00:1d.0
>    1800-181f : uhci_hcd
>  1820-182f : 0000:00:1f.1
>    1820-1827 : ide0
>    1828-182f : ide1
>  1840-185f : 0000:00:1f.3
>    1840-1847 : i801-smbus
>  2000-2fff : PCI Bus #01
>    2000-20ff : 0000:01:00.0
>  3000-3fff : PCI Bus #02
>    3000-30ff : 0000:02:03.0
>      3000-30ff : Allegro
>    3400-34ff : 0000:02:04.0
>    3800-383f : 0000:02:08.0
>      3800-383f : e100
>    3840-3847 : 0000:02:04.0
>  4000-4fff : PCI CardBus #03
>  5000-5fff : PCI CardBus #03
>  6000-6fff : PCI CardBus #07
>  7000-7fff : PCI CardBus #07
>  fe00-fe00 : motherboard
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>    0:     261135          XT-PIC  timer
>    1:        877          XT-PIC  i8042
>    2:          0          XT-PIC  cascade
>    3:          9          XT-PIC  serial
>    4:          9          XT-PIC  serial
>    5:        398          XT-PIC  Allegro
>    6:         17          XT-PIC  floppy
>    7:        133          XT-PIC  parport0
>    8:          2          XT-PIC  rtc
>    9:       2391          XT-PIC  acpi
>   10:       4469          XT-PIC  uhci_hcd:usb1, yenta, yenta, eth0, ohci1394
>   12:       4764          XT-PIC  i8042
>   14:      13737          XT-PIC  ide0
>   15:       9207          XT-PIC  ide1
>  NMI:          0 
>  LOC:          0 
>  ERR:         27
>  MIS:          0
>----- /proc/interrupts end -----
>----- /proc/dma -----
>   1: parport0
>   2: floppy
>   4: cascade
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 6
>  model		: 11
>  model name	: Intel(R) Pentium(R) III Mobile CPU      1000MHz
>  stepping	: 1
>  cpu MHz		: 996.851
>  cache size	: 512 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 2
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
>  bogomips	: 1995.16
>  
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0x2ff60000
>  klog mem 0: 0x2f314000
>  klog mem 1: 0x0
>  klog mem:   0x2f314000
> -- <4> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> -- <4> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> -- <4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> -- <4> BIOS-e820: 0000000000100000 - 000000002ff60000 (usable)
> -- <4> BIOS-e820: 000000002ff60000 - 000000002ff73c00 (ACPI data)
> -- <4> BIOS-e820: 000000002ff73c00 - 000000002ff80000 (ACPI NVS)
> -- <4> BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved)
> -- <4> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> -- <4> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
> -- <5>0MB HIGHMEM available.
>  bios mem:   0x2feff400
>  meminfo:    0x2f517000
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0x9aa75d6d518efa7a) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>        ide-disk: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>            sbp2: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0
>        Maestro3: /devices/pci0000:00/0000:00:1e.0/0000:02:03.0
>        PIIX_IDE: /devices/pci0000:00/0000:00:1f.1
>   agpgart-intel: /devices/pci0000:00/0000:00:00.0
>            e100: /devices/pci0000:00/0000:00:1e.0/0000:02:08.0
>      i801_smbus: /devices/pci0000:00/0000:00:1f.3
>        ohci1394: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.0
>   yenta_cardbus: /devices/pci0000:00/0000:00:1e.0/0000:02:05.0
>   yenta_cardbus: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>       i8042 aux: /devices/pnp0/00:07
>       i8042 kbd: /devices/pnp0/00:06
>      parport_pc: /devices/pnp0/00:09
>          serial: /devices/pnp0/00:0a
>          system: /devices/pnp0/00:00
>          system: /devices/pnp0/00:01
>              sr: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0/host0/target0:0:0/0:0:0:0
>           atkbd: /devices/platform/i8042/serio1
>         psmouse: /devices/platform/i8042/serio0
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>             hub: /module/usbcore
>           usbfs: /module/usbcore
>          usbhid: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2
>          usbhid: /module/usbhid
>           usblp: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1
>           usblp: /module/usblp
>             usb: /devices/pci0000:00/0000:00:1d.0/usb1/1-2
>             usb: /devices/pci0000:00/0000:00:1d.0/usb1
>             usb: /module/usbcore
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:00.0
>    modalias = "pci:v00008086d00003575sv0000FFFFsd0000FFFFbc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x8086
>    device = 0x3575
>    subvendor = 0xffff
>    subdevice = 0xffff
>    irq = 0
>    res[0] = 0xe0000000 0xefffffff 0x1208
>    config[64]
>  pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0
>    modalias = "pci:v00008086d00003576sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x3576
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1d.0, bus_id = 0000:00:1d.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.0
>    modalias = "pci:v00008086d00002482sv0000103Csd0000001Abc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x2482
>    subvendor = 0x103c
>    subdevice = 0x1a
>    irq = 10
>    res[4] = 0x1800 0x181f 0x101
>    config[64]
>  pci device: name = 0000:00:1e.0, bus_id = 0000:00:1e.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0
>    modalias = "pci:v00008086d00002448sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x2448
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.0, bus_id = 0000:00:1f.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.0
>    modalias = "pci:v00008086d0000248Csv00000000sd00000000bc06sc01i00
>"
>    class = 0x60100
>    vendor = 0x8086
>    device = 0x248c
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.1, bus_id = 0000:00:1f.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.1
>    modalias = "pci:v00008086d0000248Asv0000103Csd0000001Abc01sc01i8a
>"
>    class = 0x1018a
>    vendor = 0x8086
>    device = 0x248a
>    subvendor = 0x103c
>    subdevice = 0x1a
>    irq = 5
>    res[4] = 0x1820 0x182f 0x101
>    res[5] = 0xd0000000 0xd00003ff 0x200
>    config[64]
>  pci device: name = 0000:00:1f.3, bus_id = 0000:00:1f.3, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.3
>    modalias = "pci:v00008086d00002483sv0000103Csd0000001Abc0Csc05i00
>"
>    class = 0xc0500
>    vendor = 0x8086
>    device = 0x2483
>    subvendor = 0x103c
>    subdevice = 0x1a
>    irq = 10
>    res[4] = 0x1840 0x185f 0x101
>    config[64]
>  pci device: name = 0000:01:00.0, bus_id = 0000:01:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>    modalias = "pci:v00001002d00004C59sv0000103Csd0000001Abc03sc00i00
>"
>    class = 0x30000
>    vendor = 0x1002
>    device = 0x4c59
>    subvendor = 0x103c
>    subdevice = 0x1a
>    irq = 10
>    res[0] = 0xd8000000 0xdfffffff 0x1208
>    res[1] = 0x2000 0x20ff 0x101
>    res[2] = 0xd0100000 0xd010ffff 0x200
>    res[6] = 0xd0120000 0xd013ffff 0x7202
>    config[64]
>  pci device: name = 0000:02:03.0, bus_id = 0000:02:03.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:02:03.0
>    modalias = "pci:v0000125Dd00001988sv0000103Csd0000001Abc04sc01i00
>"
>    class = 0x40100
>    vendor = 0x125d
>    device = 0x1988
>    subvendor = 0x103c
>    subdevice = 0x1a
>    irq = 5
>    res[0] = 0x3000 0x30ff 0x101
>    config[64]
>  pci device: name = 0000:02:04.0, bus_id = 0000:02:04.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:02:04.0
>    modalias = "pci:v000011C1d00000450sv00001468sd00000450bc07sc80i00
>"
>    class = 0x78000
>    vendor = 0x11c1
>    device = 0x450
>    subvendor = 0x1468
>    subdevice = 0x450
>    irq = 10
>    res[0] = 0xd0201000 0xd02010ff 0x200
>    res[1] = 0x3840 0x3847 0x101
>    res[2] = 0x3400 0x34ff 0x101
>    config[64]
>  pci device: name = 0000:02:05.0, bus_id = 0000:02:05.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:02:05.0
>    modalias = "pci:v0000104Cd0000AC51sv0000103Csd0000001Abc06sc07i00
>"
>    class = 0x60700
>    vendor = 0x104c
>    device = 0xac51
>    subvendor = 0x103c
>    subdevice = 0x1a
>    irq = 10
>    res[0] = 0xd0202000 0xd0202fff 0x200
>    config[64]
>  pci device: name = 0000:02:05.1, bus_id = 0000:02:05.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:02:05.1
>    modalias = "pci:v0000104Cd0000AC51sv0000103Csd0000001Abc06sc07i00
>"
>    class = 0x60700
>    vendor = 0x104c
>    device = 0xac51
>    subvendor = 0x103c
>    subdevice = 0x1a
>    irq = 10
>    res[0] = 0xd0203000 0xd0203fff 0x200
>    config[64]
>  pci device: name = 0000:02:08.0, bus_id = 0000:02:08.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:02:08.0
>    modalias = "pci:v00008086d00001038sv0000103Csd0000001Abc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x8086
>    device = 0x1038
>    subvendor = 0x103c
>    subdevice = 0x1a
>    irq = 10
>    res[0] = 0xd0200000 0xd0200fff 0x200
>    res[1] = 0x3800 0x383f 0x101
>    config[64]
>  pci device: name = 0000:07:00.0, bus_id = 0000:07:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0
>    modalias = "pci:v00001033d000000F2sv00001033sd000000CEbc0Csc00i10
>"
>    class = 0xc0010
>    vendor = 0x1033
>    device = 0xf2
>    subvendor = 0x1033
>    subdevice = 0xce
>    irq = 10
>    res[0] = 0x36000000 0x36000fff 0x200
>    res[1] = 0x36001000 0x360010ff 0x200
>    res[2] = 0x36001100 0x360011ff 0x200
>    config[64]
>---------- PCI raw data ----------
>bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:3575:ffff:ffff:02
>class 06, sub_class 00 prog_if 00, hdr 0, flags <agp>, irq 0
>  addr0 e0000000, size 10000000
>  00: 86 80 75 35 06 01 10 20 02 00 00 06 00 00 00 00  "..u5... ........"
>  10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff  "................"
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00  "....@..........."
>  40: 09 a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 02 00  ".."
>
>bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 8086:3576:0000:0000:02
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 86 80 76 35 07 01 20 00 02 00 04 06 00 60 01 00  "..v5.. ......`.."
>  10: 00 00 00 00 00 00 00 00 00 01 01 40 20 20 a0 22  "...........@  .""
>  20: 10 d0 10 d0 00 d8 f0 df 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00  "................"
>
>bus 00, slot 1d, func 0, vend:dev:s_vend:s_dev:rev 8086:2482:103c:001a:01
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 10
>  addr4 00001800, size 00000020
>  00: 86 80 82 24 05 00 80 02 01 00 03 0c 00 00 00 00  "...$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 18 00 00 00 00 00 00 00 00 00 00 3c 10 1a 00  "............<..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 00 00  "................"
>
>bus 00->02, slot 1e, func 0, vend:dev:s_vend:s_dev:rev 8086:2448:0000:0000:41
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: 86 80 48 24 07 01 80 00 41 00 04 06 00 00 01 00  "..H$....A......."
>  10: 00 00 00 00 00 00 00 00 00 02 0a 40 30 30 80 22  "...........@00.""
>  20: 20 d0 20 d0 00 30 f0 33 00 00 00 00 00 00 00 00  " . ..0.3........"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 00  "................"
>
>bus 00, slot 1f, func 0, vend:dev:s_vend:s_dev:rev 8086:248c:0000:0000:01
>class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0
>  00: 86 80 8c 24 0f 00 80 02 01 00 01 06 00 00 80 00  "...$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 1f, func 1, vend:dev:s_vend:s_dev:rev 8086:248a:103c:001a:01
>class 01, sub_class 01 prog_if 8a, hdr 0, flags <>, irq 5
>  addr4 00001820, size 00000010
>  addr5 d0000000, size 00000400
>  00: 86 80 8a 24 07 00 80 02 01 8a 01 01 00 00 00 00  "...$............"
>  10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00  "........q...u..."
>  20: 21 18 00 00 00 00 00 d0 00 00 00 00 3c 10 1a 00  "!...........<..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00  "................"
>
>bus 00, slot 1f, func 3, vend:dev:s_vend:s_dev:rev 8086:2483:103c:001a:01
>class 0c, sub_class 05 prog_if 00, hdr 0, flags <>, irq 10
>  addr4 00001840, size 00000020
>  00: 86 80 83 24 01 00 80 02 01 00 05 0c 00 00 00 00  "...$............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 41 18 00 00 00 00 00 00 00 00 00 00 3c 10 1a 00  "A...........<..."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00  "................"
>
>bus 01, slot 00, func 0, vend:dev:s_vend:s_dev:rev 1002:4c59:103c:001a:00
>class 03, sub_class 00 prog_if 00, hdr 0, flags <pm,agp>, irq 10
>  addr0 d8000000, size 08000000
>  addr1 00002000, size 00000100
>  addr2 d0100000, size 00010000
>  00: 02 10 59 4c 87 03 b0 02 00 00 00 03 08 42 00 00  "..YL.........B.."
>  10: 08 00 00 d8 01 20 00 00 00 00 10 d0 00 00 00 00  "..... .........."
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 1a 00  "............<..."
>  30: 00 00 00 00 58 00 00 00 00 00 00 00 0a 01 08 00  "....X..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 01 00 00 00 00 00 00 00 02 50  ".........P"
>
>bus 02, slot 03, func 0, vend:dev:s_vend:s_dev:rev 125d:1988:103c:001a:12
>class 04, sub_class 01 prog_if 00, hdr 0, flags <pm>, irq 5
>  addr0 00003000, size 00000100
>  00: 5d 12 88 19 05 00 90 02 12 00 01 04 00 40 00 00  "]............@.."
>  10: 01 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ".0.............."
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 1a 00  "............<..."
>  30: 00 00 00 00 c0 00 00 00 00 00 00 00 05 01 02 18  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 01 00  ".."
>
>bus 02, slot 04, func 0, vend:dev:s_vend:s_dev:rev 11c1:0450:1468:0450:02
>class 07, sub_class 80 prog_if 00, hdr 0, flags <pm>, irq 10
>  addr0 d0201000, size 00000100
>  addr1 00003840, size 00000008
>  addr2 00003400, size 00000100
>  00: c1 11 50 04 03 01 90 02 02 00 80 07 00 40 00 00  "..P..........@.."
>  10: 00 10 20 d0 41 38 00 00 01 34 00 00 00 00 00 00  ".. .A8...4......"
>  20: 00 00 00 00 00 00 00 00 40 00 00 00 68 14 50 04  "........@...h.P."
>  30: 00 00 00 00 f8 00 00 00 00 00 00 00 0a 01 fc 0e  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  f0: 00 00 00 00 00 00 00 00 01 00  ".........."
>
>bus 02->03, slot 05, func 0, vend:dev:s_vend:s_dev:rev 104c:ac51:103c:001a:00
>class 06, sub_class 07 prog_if 00, hdr 2, flags <>, irq 10
>  addr0 d0202000, size 00001000
>  00: 4c 10 51 ac 07 00 10 02 00 00 07 06 20 a8 82 00  "L.Q......... ..."
>  10: 00 20 20 d0 a0 00 00 02 02 03 06 b0 00 00 00 30  ".  ............0"
>  20: 00 f0 ff 31 00 00 00 34 00 f0 ff 35 00 40 00 00  "...1...4...5.@.."
>  30: fc 4f 00 00 00 50 00 00 fc 5f 00 00 ff 01 c0 05  ".O...P..._......"
>
>bus 02->07, slot 05, func 1, vend:dev:s_vend:s_dev:rev 104c:ac51:103c:001a:00
>class 06, sub_class 07 prog_if 00, hdr 2, flags <>, irq 10
>  addr0 d0203000, size 00001000
>  00: 4c 10 51 ac 07 00 10 02 00 00 07 06 20 a8 82 00  "L.Q......... ..."
>  10: 00 30 20 d0 a0 00 00 02 02 07 0a b0 00 00 00 32  ".0 ............2"
>  20: 00 f0 ff 33 00 00 00 36 00 f0 ff 37 00 60 00 00  "...3...6...7.`.."
>  30: fc 6f 00 00 00 70 00 00 fc 7f 00 00 ff 02 00 05  ".o...p.........."
>
>bus 02, slot 08, func 0, vend:dev:s_vend:s_dev:rev 8086:1038:103c:001a:41
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 10
>  addr0 d0200000, size 00001000
>  addr1 00003800, size 00000040
>  00: 86 80 38 10 17 01 90 02 41 00 00 02 08 42 00 00  "..8.....A....B.."
>  10: 00 00 20 d0 01 38 00 00 00 00 00 00 00 00 00 00  ".. ..8.........."
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 1a 00  "............<..."
>  30: 00 00 00 00 dc 00 00 00 00 00 00 00 0a 01 08 38  "...............8"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00  ".............."
>
>bus 07, slot 00, func 0, vend:dev:s_vend:s_dev:rev 1033:00f2:1033:00ce:01
>class 0c, sub_class 00 prog_if 10, hdr 0, flags <pm>, irq 10
>  addr0 36000000, size 00001000
>  addr1 36001000, size 00000100
>  addr2 36001100, size 00000100
>  00: 33 10 f2 00 06 00 90 02 01 10 00 0c 00 40 00 00  "3............@.."
>  10: 00 00 00 36 00 10 00 36 00 11 00 36 00 00 00 00  "...6...6...6...."
>  20: 00 00 00 00 00 00 00 00 80 00 00 00 33 10 ce 00  "............3..."
>  30: 00 00 00 00 60 00 00 00 00 00 00 00 0a 01 00 00  "....`..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 01 00  ".."
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> monitor.1: ddc
>>> isapnp.1: pnp devices
>  pnp device: name = 00:00, bus_id = 00:00, bus = pnp
>    path = /devices/pnp0/00:00
>    id = PNP 0c02
>  pnp device: name = 00:01, bus_id = 00:01, bus = pnp
>    path = /devices/pnp0/00:01
>    id = PNP 0c02
>  pnp device: name = 00:02, bus_id = 00:02, bus = pnp
>    path = /devices/pnp0/00:02
>    id = PNP 0200
>  pnp device: name = 00:03, bus_id = 00:03, bus = pnp
>    path = /devices/pnp0/00:03
>    id = PNP 0b00
>  pnp device: name = 00:04, bus_id = 00:04, bus = pnp
>    path = /devices/pnp0/00:04
>    id = PNP 0c04
>  pnp device: name = 00:05, bus_id = 00:05, bus = pnp
>    path = /devices/pnp0/00:05
>    id = PNP 0800
>  pnp device: name = 00:06, bus_id = 00:06, bus = pnp
>    path = /devices/pnp0/00:06
>    id = PNP 0303
>  pnp device: name = 00:07, bus_id = 00:07, bus = pnp
>    path = /devices/pnp0/00:07
>    id = PNP 0f13
>  pnp device: name = 00:08, bus_id = 00:08, bus = pnp
>    path = /devices/pnp0/00:08
>    id = PNP 0a05
>  pnp device: name = 00:09, bus_id = 00:09, bus = pnp
>    path = /devices/pnp0/00:09
>    id = PNP 0401
>  pnp device: name = 00:0a, bus_id = 00:0a, bus = pnp
>    path = /devices/pnp0/00:0a
>    id = PNP 0501
>  pnp device: name = 00:0b, bus_id = 00:0b, bus = pnp
>    path = /devices/pnp0/00:0b
>    id = PNP 0700
>  pnp device: name = 00:0c, bus_id = 00:0c, bus = pnp
>    path = /devices/pnp0/00:0c
>    id = HWP c224
>  pnp device: name = 00:0d, bus_id = 00:0d, bus = pnp
>    path = /devices/pnp0/00:0d
>    id = HWP c209
>>> isa.1: isdn
>---------- ISA ISDN raw data ----------
>---------- ISA ISDN raw data end ----------
>>> isa.1.1: isdn
>>> pcmcia.1: sysfs drivers
>>> pcmcia.2: pcmcia
>>> pcmcia.3: pcmcia ctrl
>  pcmcia socket 0: /devices/pci0000:00/0000:00:1e.0/0000:02:05.0
>  pcmcia socket 1: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1
>>> serial.1: read info
>----- /proc/tty/driver/serial -----
>  0: uart:16550A port:000003F8 irq:4 tx:0 rx:0 RTS|DTR
>  1: uart:NS16550A port:000002F8 irq:3 tx:0 rx:0 RTS|DTR
>  2: uart:unknown port:000003E8 irq:4
>  3: uart:unknown port:000002E8 irq:3
>----- /proc/tty/driver/serial end -----
>----- serial info -----
>  uart 16550A, line 0, port 0x3f8, irq 4, baud 0
>  uart NS16550A, line 1, port 0x2f8, irq 3, baud 0
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>i/o:1 0x0000 - 0x001f (0x20) "dma1"
>i/o:1 0x0020 - 0x0021 (0x02) "pic1"
>i/o:0 0x0040 - 0x0043 (0x04) "timer0"
>i/o:0 0x0050 - 0x0053 (0x04) "timer1"
>i/o:1 0x0060 - 0x006f (0x10) "keyboard"
>i/o:1 0x0070 - 0x0077 (0x08) "rtc"
>i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
>i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
>i/o:1 0x00c0 - 0x00df (0x20) "dma2"
>i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
>i/o:1 0x0170 - 0x0177 (0x08) "ide1"
>i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
>i/o:1 0x02f8 - 0x02ff (0x08) "serial"
>i/o:1 0x0376 - 0x0376 (0x01) "ide1"
>i/o:1 0x0378 - 0x037a (0x03) "parport0"
>i/o:1 0x03c0 - 0x03df (0x20) "vesafb"
>i/o:1 0x03f2 - 0x03f5 (0x04) "floppy"
>i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
>i/o:1 0x03f7 - 0x03f7 (0x01) "floppy DIR"
>i/o:1 0x03f8 - 0x03ff (0x08) "serial"
>i/o:1 0x0778 - 0x077a (0x03) "parport0"
>i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
>i/o:0 0x1000 - 0x107f (0x80) "0000:00:1f.0"
>i/o:0 0x1000 - 0x107f (0x80) "motherboard"
>i/o:0 0x1000 - 0x1003 (0x04) "PM1a_EVT_BLK"
>i/o:0 0x1004 - 0x1005 (0x02) "PM1a_CNT_BLK"
>i/o:0 0x1008 - 0x100b (0x04) "PM_TMR"
>i/o:0 0x1010 - 0x1015 (0x06) "ACPI CPU throttle"
>i/o:0 0x1020 - 0x1020 (0x01) "PM2_CNT_BLK"
>i/o:0 0x1028 - 0x102b (0x04) "GPE0_BLK"
>i/o:0 0x102c - 0x102f (0x04) "GPE1_BLK"
>i/o:0 0x1180 - 0x11bf (0x40) "0000:00:1f.0"
>i/o:0 0x1180 - 0x11bf (0x40) "motherboard"
>i/o:0 0x1800 - 0x181f (0x20) "0000:00:1d.0"
>i/o:0 0x1800 - 0x181f (0x20) "uhci_hcd"
>i/o:0 0x1820 - 0x182f (0x10) "0000:00:1f.1"
>i/o:1 0x1820 - 0x1827 (0x08) "ide0"
>i/o:1 0x1828 - 0x182f (0x08) "ide1"
>i/o:0 0x1840 - 0x185f (0x20) "0000:00:1f.3"
>i/o:0 0x1840 - 0x1847 (0x08) "i801-smbus"
>i/o:0 0x2000 - 0x2fff (0x1000) "PCI Bus #01"
>i/o:0 0x2000 - 0x20ff (0x100) "0000:01:00.0"
>i/o:0 0x3000 - 0x3fff (0x1000) "PCI Bus #02"
>i/o:0 0x3000 - 0x30ff (0x100) "0000:02:03.0"
>i/o:0 0x3000 - 0x30ff (0x100) "Allegro"
>i/o:0 0x3400 - 0x34ff (0x100) "0000:02:04.0"
>i/o:0 0x3800 - 0x383f (0x40) "0000:02:08.0"
>i/o:0 0x3800 - 0x383f (0x40) "e100"
>i/o:0 0x3840 - 0x3847 (0x08) "0000:02:04.0"
>i/o:0 0x4000 - 0x4fff (0x1000) "PCI CardBus #03"
>i/o:0 0x5000 - 0x5fff (0x1000) "PCI CardBus #03"
>i/o:0 0x6000 - 0x6fff (0x1000) "PCI CardBus #07"
>i/o:0 0x7000 - 0x7fff (0x1000) "PCI CardBus #07"
>i/o:0 0xfe00 - 0xfe00 (0x01) "motherboard"
>irq:1  0 (   261135) "timer"
>irq:0  1 (      877) "i8042"
>irq:1  2 (        0) "cascade"
>irq:1  3 (        9) "serial"
>irq:1  4 (        9) "serial"
>irq:0  5 (      398) "Allegro"
>irq:1  6 (       17) "floppy"
>irq:1  7 (      133) "parport0"
>irq:1  8 (        2) "rtc"
>irq:0  9 (     2391) "acpi"
>irq:0 10 (     4469) "uhci_hcd:usb1" "yenta" "yenta" "eth0" "ohci1394"
>irq:0 12 (     4764) "i8042"
>irq:1 14 (    13737) "ide0"
>irq:1 15 (     9207) "ide1"
>dma:1 1 "parport0"
>dma:1 2 "floppy"
>dma:1 4 "cascade"
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/rmmod lp" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe lp" -----
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>/proc/sys/dev/parport/parport0/base-addr
>  888	1912
>/proc/sys/dev/parport/parport0/autoprobe
>----- parallel info end -----
>>> parallel.5: ppa mod
>----- exec: "/sbin/modprobe ppa " -----
>----- return code: ? -----
>>> parallel.6: zip read info
>----- exec: "/sbin/rmmod ppa" -----
>----- return code: ? -----
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>----- exec: "/sbin/modprobe sd_mod " -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe st " -----
>----- return code: ? -----
>>> block.2: sysfs drivers
>----- sysfs driver list (id 0x650ea4f501c1d75c) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>        ide-disk: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>            sbp2: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0
>        Maestro3: /devices/pci0000:00/0000:00:1e.0/0000:02:03.0
>        PIIX_IDE: /devices/pci0000:00/0000:00:1f.1
>   agpgart-intel: /devices/pci0000:00/0000:00:00.0
>            e100: /devices/pci0000:00/0000:00:1e.0/0000:02:08.0
>      i801_smbus: /devices/pci0000:00/0000:00:1f.3
>        ohci1394: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.0
>   yenta_cardbus: /devices/pci0000:00/0000:00:1e.0/0000:02:05.0
>   yenta_cardbus: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>       i8042 aux: /devices/pnp0/00:07
>       i8042 kbd: /devices/pnp0/00:06
>      parport_pc: /devices/pnp0/00:09
>          serial: /devices/pnp0/00:0a
>          system: /devices/pnp0/00:00
>          system: /devices/pnp0/00:01
>              sr: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0/host0/target0:0:0/0:0:0:0
>           atkbd: /devices/platform/i8042/serio1
>         psmouse: /devices/platform/i8042/serio0
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>             hub: /module/usbcore
>           usbfs: /module/usbcore
>          usbhid: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2
>          usbhid: /module/usbhid
>           usblp: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1
>           usblp: /module/usblp
>             usb: /devices/pci0000:00/0000:00:1d.0/usb1/1-2
>             usb: /devices/pci0000:00/0000:00:1d.0/usb1
>             usb: /module/usbcore
>----- sysfs driver list end -----
>>> block.3: cdrom
>----- /proc/sys/dev/cdrom/info -----
>drive name:		sr0	hdc
>drive speed:		24	24
>drive # of slots:	1	1
>Can close tray:		1	1
>Can open tray:		1	1
>Can lock tray:		1	1
>Can change speed:	1	1
>Can select disk:	0	0
>Can read multisession:	1	1
>Can read MCN:		1	1
>Reports media changed:	1	1
>Can play audio:		1	1
>Can write CD-R:		1	1
>Can write CD-RW:	1	1
>Can read DVD:		1	0
>Can write DVD-R:	1	0
>Can write DVD-RAM:	0	0
>Can read MRW:		1	1
>Can write MRW:		1	1
>Can write RAM:		1	1
>----- /proc/sys/dev/cdrom/info end -----
>>> block.4: partition
>----- /proc/partitions -----
>     3     0   19535040 hda
>     3     1    1052226 hda1
>     3     2   18482782 hda2
>----- /proc/partitions end -----
>disks:
>  hda
>partitions:
>  hda1
>  hda2
>>> block.5: get sysfs block dev data
>  ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  ide: bus_id = 1.0 path = /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>  block: name = fd0, path = /block/fd0
>    dev = 2:0
>    range = 1
>    block device: bus = platform, bus_id = floppy.0 driver = unknown
>      path = /devices/platform/floppy.0
>  block: name = hda, path = /block/hda
>    dev = 3:0
>    range = 64
>    block device: bus = ide, bus_id = 0.0 driver = ide-disk
>      path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>>> block.5: /dev/hda
>>> block.5.1: /dev/hda geo
>  dev = /dev/hda, fd = 3
>  open ok, fd = 3
>/dev/hda: ioctl(geo) ok
>/dev/hda: ioctl(block size) ok
>/dev/hda: ioctl(disk size) ok
>  block: name = hdc, path = /block/hdc
>    dev = 22:0
>    range = 1
>    block device: bus = ide, bus_id = 1.0 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>  block: name = loop0, path = /block/loop0
>    dev = 7:0
>    range = 1
>  block: name = loop1, path = /block/loop1
>    dev = 7:1
>    range = 1
>  block: name = loop2, path = /block/loop2
>    dev = 7:2
>    range = 1
>  block: name = loop3, path = /block/loop3
>    dev = 7:3
>    range = 1
>  block: name = loop4, path = /block/loop4
>    dev = 7:4
>    range = 1
>  block: name = loop5, path = /block/loop5
>    dev = 7:5
>    range = 1
>  block: name = loop6, path = /block/loop6
>    dev = 7:6
>    range = 1
>  block: name = loop7, path = /block/loop7
>    dev = 7:7
>    range = 1
>  block: name = md0, path = /block/md0
>    dev = 9:0
>    range = 1
>  block: name = ram0, path = /block/ram0
>    dev = 1:0
>    range = 1
>  block: name = ram10, path = /block/ram10
>    dev = 1:10
>    range = 1
>  block: name = ram11, path = /block/ram11
>    dev = 1:11
>    range = 1
>  block: name = ram12, path = /block/ram12
>    dev = 1:12
>    range = 1
>  block: name = ram13, path = /block/ram13
>    dev = 1:13
>    range = 1
>  block: name = ram14, path = /block/ram14
>    dev = 1:14
>    range = 1
>  block: name = ram15, path = /block/ram15
>    dev = 1:15
>    range = 1
>  block: name = ram1, path = /block/ram1
>    dev = 1:1
>    range = 1
>  block: name = ram2, path = /block/ram2
>    dev = 1:2
>    range = 1
>  block: name = ram3, path = /block/ram3
>    dev = 1:3
>    range = 1
>  block: name = ram4, path = /block/ram4
>    dev = 1:4
>    range = 1
>  block: name = ram5, path = /block/ram5
>    dev = 1:5
>    range = 1
>  block: name = ram6, path = /block/ram6
>    dev = 1:6
>    range = 1
>  block: name = ram7, path = /block/ram7
>    dev = 1:7
>    range = 1
>  block: name = ram8, path = /block/ram8
>    dev = 1:8
>    range = 1
>  block: name = ram9, path = /block/ram9
>    dev = 1:9
>    range = 1
>  block: name = sr0, path = /block/sr0
>    dev = 11:0
>    range = 1
>    block device: bus = scsi, bus_id = 0:0:0:0 driver = sr
>      path = /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0/host0/target0:0:0/0:0:0:0
>    vendor = _NEC
>    model = DVD+-RW ND-6500A
>    rev = 2.22
>    type = 5
>>> block.5: /dev/sr0
>>> block.5.1: /dev/sr0 cache
>  scsi cache: 0x00
>>> scsi.1: scsi modules
>>> scsi.2: scsi tape
>>> scsi.3: scsi generic
>  scsi: name = sg0, path = /class/scsi_generic/sg0
>    dev = 21:0
>    scsi device: bus = scsi, bus_id = 0:0:0:0 driver = sr
>      path = /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0/host0/target0:0:0/0:0:0:0
>>> usb.1: sysfs drivers
>----- sysfs driver list (id 0x280ec1146b80e06a) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>        ide-disk: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>            sbp2: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0
>        Maestro3: /devices/pci0000:00/0000:00:1e.0/0000:02:03.0
>        PIIX_IDE: /devices/pci0000:00/0000:00:1f.1
>   agpgart-intel: /devices/pci0000:00/0000:00:00.0
>            e100: /devices/pci0000:00/0000:00:1e.0/0000:02:08.0
>      i801_smbus: /devices/pci0000:00/0000:00:1f.3
>        ohci1394: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.0
>   yenta_cardbus: /devices/pci0000:00/0000:00:1e.0/0000:02:05.0
>   yenta_cardbus: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>       i8042 aux: /devices/pnp0/00:07
>       i8042 kbd: /devices/pnp0/00:06
>      parport_pc: /devices/pnp0/00:09
>          serial: /devices/pnp0/00:0a
>          system: /devices/pnp0/00:00
>          system: /devices/pnp0/00:01
>              sr: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0/host0/target0:0:0/0:0:0:0
>           atkbd: /devices/platform/i8042/serio1
>         psmouse: /devices/platform/i8042/serio0
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>             hub: /module/usbcore
>           usbfs: /module/usbcore
>          usbhid: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2
>          usbhid: /module/usbhid
>           usblp: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1
>           usblp: /module/usblp
>             usb: /devices/pci0000:00/0000:00:1d.0/usb1/1-2
>             usb: /devices/pci0000:00/0000:00:1d.0/usb1
>             usb: /module/usbcore
>----- sysfs driver list end -----
>>> usb.2: usb
>  usb dev: /devices/pci0000:00/0000:00:1d.0/usb1/1-2
>  usb dev: /devices/pci0000:00/0000:00:1d.0/usb1
>  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:1d.0/usb1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-9-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.0"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 1-2:1.0, bus_id = 1-2:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0
>    modalias = "usb:v043Dp008Ad0001dc00dsc00dp00icFFiscFFipFF"
>    bInterfaceNumber = 0
>    bInterfaceClass = 255
>    bInterfaceSubClass = 255
>    bInterfaceProtocol = 255
>    if: 1-2:1.0 @ /devices/pci0000:00/0000:00:1d.0/usb1/1-2
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x043d
>    idProduct = 0x008a
>    manufacturer = "Lexmark"
>    product = "4200 Series"
>    serial = "20050201-084445"
>    bcdDevice = 0001
>    speed = "12"
>  usb device: name = 1-2:1.1, bus_id = 1-2:1.1, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1
>    modalias = "usb:v043Dp008Ad0001dc00dsc00dp00ic07isc01ip02"
>    bInterfaceNumber = 1
>    bInterfaceClass = 7
>    bInterfaceSubClass = 1
>    bInterfaceProtocol = 2
>    if: 1-2:1.1 @ /devices/pci0000:00/0000:00:1d.0/usb1/1-2
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x043d
>    idProduct = 0x008a
>    manufacturer = "Lexmark"
>    product = "4200 Series"
>    serial = "20050201-084445"
>    bcdDevice = 0001
>    speed = "12"
>  usb device: name = 1-2:1.2, bus_id = 1-2:1.2, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2
>    modalias = "usb:v043Dp008Ad0001dc00dsc00dp00ic03isc00ip00"
>    bInterfaceNumber = 2
>    bInterfaceClass = 3
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-2:1.2 @ /devices/pci0000:00/0000:00:1d.0/usb1/1-2
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x043d
>    idProduct = 0x008a
>    manufacturer = "Lexmark"
>    product = "4200 Series"
>    serial = "20050201-084445"
>    bcdDevice = 0001
>    speed = "12"
>  usb device: name = 1-2, bus_id = 1-2, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1/1-2
>  usb device: name = usb1, bus_id = usb1, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1
>removed: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.2
>>> usb.3.1: joydev mod
>----- exec: "/sbin/modprobe joydev " -----
>----- return code: ? -----
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> usb.3.3: input
>  input: name = event0, path = /class/input/event0
>    dev = 13:64
>  input: name = event1, path = /class/input/event1
>    dev = 13:65
>    input device: bus = serio, bus_id = serio1 driver = atkbd
>      path = /devices/platform/i8042/serio1
>  input: name = event2, path = /class/input/event2
>    dev = 13:66
>    input device: bus = serio, bus_id = serio0 driver = psmouse
>      path = /devices/platform/i8042/serio0
>  input: name = mice, path = /class/input/mice
>    dev = 13:63
>  input: name = mouse0, path = /class/input/mouse0
>    dev = 13:32
>    input device: bus = serio, bus_id = serio0 driver = psmouse
>      path = /devices/platform/i8042/serio0
>>> usb.3.4: lp
>  usb: name = lp0, path = /class/usb/lp0
>    dev = 180:0
>    usb device: bus = usb, bus_id = 1-2:1.1 driver = usblp
>      path = /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1
>  usb/lp: bus = 1, dev_nr = 2
>  usb/lp: vend = 0x043d, prod = 0x008a
>  usb/lp: "MFG:Lexmark ;CMD:CPDNPA001;MODEL:4200 Series;CLASS:Printer;DES:Lexmark 4200 Series;"
>  usb/lp: vend = Lexmark , prod = 4200 Series, descr = Lexmark 4200 Series, serial = 
>>> usb.3.5: serial
>>> edd.1: edd mod
>>> edd.2: edd info
>edd: 0x80
>  size: 39070080
>  chs default: 41344/15/63
>  chs legacy: 1023/240/63
>  caps: fixed edd 
>  attached: #0 
>>> braille.1.1: alva
>>> braille.2.1: alva open
>>> braille.3.1: alva init ok
>>> braille.4.1: alva read data
>alva.100@/dev/ttyS0[0]: 
>>> braille.5.1: alva read done
>>> braille.1.1: fhp_old
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: fhp_el
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: ht
>>> braille.2.1: ht open
>>> braille.3.1: ht init ok
>>> braille.4.1: ht write ok
>>> braille.5.1: ht read done
>ht@/dev/ttyS0[1]: 00  "."
>no ht display: 0x00
>>> braille.1.1: baum
>>> braille.2.1: baum open
>>> braille.3.1: baum write ok
>>> braille.4.1: baum read done
>baum@/dev/ttyS0[0]: 
>>> braille.1.2: alva
>>> braille.2.2: alva open
>>> braille.3.2: alva init ok
>>> braille.4.2: alva read data
>alva.100@/dev/ttyS1[0]: 
>>> braille.5.2: alva read done
>>> braille.1.2: fhp_old
>>> braille.2.2: fhp open
>>> braille.3.2: fhp init ok
>>> braille.4.2: fhp write ok
>>> braille.5.2: fhp read done
>fhp@/dev/ttyS1[0]: 
>no fhp display: 0x00
>>> braille.1.2: fhp_el
>>> braille.2.2: fhp open
>>> braille.3.2: fhp init ok
>>> braille.4.2: fhp write ok
>>> braille.5.2: fhp read done
>fhp@/dev/ttyS1[0]: 
>no fhp display: 0x00
>>> braille.1.2: ht
>>> braille.2.2: ht open
>>> braille.3.2: ht init ok
>>> braille.4.2: ht write ok
>>> braille.5.2: ht read done
>ht@/dev/ttyS1[1]: 00  "."
>no ht display: 0x00
>>> braille.1.2: baum
>>> braille.2.2: baum open
>>> braille.3.2: baum write ok
>>> braille.4.2: baum read done
>baum@/dev/ttyS1[0]: 
>>> modem.1: serial
>******  started child process 6165 (15s/120s)  ******
>>> modem.2: init
>>> modem.3.1: at test
>>> modem.3.2: at test
>>> modem.3.3: at test
>>> modem.3.4: at test
>>> modem.4: init string
>>> modem.5: speed
>>> modem.5: pnp id
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>
>/dev/ttyS1
>  not a modem
>----- serial modems end -----
>******  stopped child process 6165 (121s)  ******
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>
>/dev/ttyS1
>  not a modem
>----- serial modems end -----
>>> mouse.2: serial
>******  started child process 6166 (20s/20s)  ******
>----- serial mice -----
>/dev/ttyS0
>
>/dev/ttyS1
>----- serial mice end -----
>******  stopped child process 6166 (18s)  ******
>----- serial mice -----
>/dev/ttyS0
>
>/dev/ttyS1
>----- serial mice end -----
>>> input.1: joydev mod
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>  I: Bus=0010 Vendor=001f Product=0001 Version=0100
>  N: Name="PC Speaker"
>  P: Phys=isa0061/input0
>  H: Handlers=kbd event0 
>  B: EV=40001 
>  B: SND=6 
>  
>  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
>  N: Name="AT Translated Set 2 keyboard"
>  P: Phys=isa0060/serio0/input0
>  H: Handlers=kbd event1 
>  B: EV=120013 
>  B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe 
>  B: MSC=10 
>  B: LED=7 
>  
>  I: Bus=0011 Vendor=0002 Product=0005 Version=0051
>  N: Name="ImPS/2 Logitech Wheel Mouse"
>  P: Phys=isa0060/serio1/input0
>  H: Handlers=mouse0 event2 
>  B: EV=7 
>  B: KEY=70000 0 0 0 0 0 0 0 0 
>  B: REL=103 
>  
>----- /proc/bus/input/devices end -----
>bus = 16, name = PC Speaker
>  handlers = kbd event0
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = AT Translated Set 2 keyboard
>  handlers = kbd event1
>  key = 000000040200000003802078f840d001f2ffffdfffeffffffffffffffffffffe
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = ImPS/2 Logitech Wheel Mouse
>  handlers = mouse0 event2
>  key = 000700000000000000000000000000000000000000000000000000000000000000000000
>  rel = 00000103
>  mouse buttons = 3
>  mouse wheels = 1
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 6
>  model		: 11
>  model name	: Intel(R) Pentium(R) III Mobile CPU      1000MHz
>  stepping	: 1
>  cpu MHz		: 996.851
>  cache size	: 512 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 2
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse
>  bogomips	: 1995.16
>  
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>/dev/console: major 4, minor 7
>>> fb.1: read info
>fb: size 1024 x 768
>fb: timing 78.65 MHz, 59.95 kHz, 75.69 Hz
>>> net.1: get network data
>  net interface: name = eth0, classname = net, path = /class/net/eth0
>    type = 1
>    hw_addr = 00:c0:9f:05:d0:38
>    net device: path = /devices/pci0000:00/0000:00:1e.0/0000:02:08.0
>    ethtool driver: e100
>    ethtool    bus: 0000:02:08.0
>  net interface: name = lo, classname = net, path = /class/net/lo
>    type = 772
>    hw_addr = 00:00:00:00:00:00
>  net interface: name = sit0, classname = net, path = /class/net/sit0
>    type = 776
>    hw_addr = 00:00:00:00
>  eth0: ethtool link state: 1
>  lo: ethtool link state: 1
>  sit0: GLINK ethtool error: Invalid argument
>>> pppoe.1: looking for pppoe
>>> pppoe.2: discovery
>Attempt number 1
>eth0: Sending PADI packet
>Timeout waiting for PADO packets
>Attempt number 2
>eth0: Sending PADI packet
>Timeout waiting for PADO packets
>>> 38.1: detecting wlan features
>>> 38.2: assign udi
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4.1: /dev/hda
>  read_block0: 512 bytes (5s, 0us)
>>> int.4: floppy
>>> int.5: bios
>>> int.6: mouse
>>> int.15: system info
>  system type: notebook
>  acpi: 1
>>> int.7: hdb
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>  P: /block/hda
>  N: hda
>  S: disk/by-id/ata-IC25N020ATDA04-0_63A63302389
>  S: disk/by-path/pci-0000:00:1f.1-ide-0:0
>  E: ID_TYPE=disk
>  E: ID_MODEL=IC25N020ATDA04-0
>  E: ID_SERIAL=63A63302389
>  E: ID_REVISION=DA3OA76A
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-0:0
>  
>  P: /block/hda/hda1
>  N: hda1
>  S: disk/by-id/ata-IC25N020ATDA04-0_63A63302389-part1
>  S: disk/by-path/pci-0000:00:1f.1-ide-0:0-part1
>  E: ID_TYPE=disk
>  E: ID_MODEL=IC25N020ATDA04-0
>  E: ID_SERIAL=63A63302389
>  E: ID_REVISION=DA3OA76A
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-0:0
>  E: ID_FS_USAGE=other
>  E: ID_FS_TYPE=swap
>  E: ID_FS_VERSION=2
>  E: ID_FS_UUID=
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/hda/hda2
>  N: hda2
>  S: disk/by-id/ata-IC25N020ATDA04-0_63A63302389-part2
>  S: disk/by-path/pci-0000:00:1f.1-ide-0:0-part2
>  S: disk/by-uuid/1cdfa418-d6e5-43a8-9e1d-3a46d3b466bc
>  E: ID_TYPE=disk
>  E: ID_MODEL=IC25N020ATDA04-0
>  E: ID_SERIAL=63A63302389
>  E: ID_REVISION=DA3OA76A
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-0:0
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=reiserfs
>  E: ID_FS_VERSION=3.6
>  E: ID_FS_UUID=1cdfa418-d6e5-43a8-9e1d-3a46d3b466bc
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/hdc
>  N: hdc
>  S: cdrecorder
>  S: disk/by-path/pci-0000:00:1f.1-ide-1:0
>  E: ID_TYPE=cd
>  E: ID_MODEL=UJDA340
>  E: ID_SERIAL=
>  E: ID_REVISION=1.50
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-1:0
>  
>  P: /block/sr0
>  N: sr0
>  S: cdrom
>  S: disk/by-id/ieee1394-00d04b481208d89e:0:0
>  E: ID_SERIAL=$sysfs{ieee1394_id}
>  E: ID_BUS=ieee1394
>  
>  P: /class/input/event0
>  N: input/event0
>  
>  P: /class/input/event1
>  N: input/event1
>  
>  P: /class/input/event2
>  N: input/event2
>  
>  P: /class/input/mice
>  N: input/mice
>  
>  P: /class/input/mouse0
>  N: input/mouse0
>  
>  P: /class/misc/hw_random
>  N: hwrng
>  S: hw_random
>  
>  P: /class/sound/controlC0
>  N: snd/controlC0
>  
>  P: /class/sound/pcmC0D0c
>  N: snd/pcmC0D0c
>  
>  P: /class/sound/pcmC0D0p
>  N: snd/pcmC0D0p
>  
>  P: /class/sound/timer
>  N: snd/timer
>  
>  P: /class/usb/lp0
>  N: usb/lp0
>  S: usblp0
>  
>  P: /class/usb_device/usbdev1.1
>  N: usbdev1.1
>  S: bus/usb/1/1
>  
>  P: /class/usb_device/usbdev1.2
>  N: usbdev1.2
>  S: bus/usb/1/2
>  
>-----  udevinfo end -----
>/block/hda
>  name: hda
>  links: disk/by-id/ata-IC25N020ATDA04-0_63A63302389, disk/by-path/pci-0000:00:1f.1-ide-0:0
>/block/hda/hda1
>  name: hda1
>  links: disk/by-id/ata-IC25N020ATDA04-0_63A63302389-part1, disk/by-path/pci-0000:00:1f.1-ide-0:0-part1
>/block/hda/hda2
>  name: hda2
>  links: disk/by-id/ata-IC25N020ATDA04-0_63A63302389-part2, disk/by-path/pci-0000:00:1f.1-ide-0:0-part2, disk/by-uuid/1cdfa418-d6e5-43a8-9e1d-3a46d3b466bc
>/block/hdc
>  name: hdc
>  links: cdrecorder, disk/by-path/pci-0000:00:1f.1-ide-1:0
>/block/sr0
>  name: sr0
>  links: cdrom, disk/by-id/ieee1394-00d04b481208d89e:0:0
>/class/input/event0
>  name: input/event0
>/class/input/event1
>  name: input/event1
>/class/input/event2
>  name: input/event2
>/class/input/mice
>  name: input/mice
>/class/input/mouse0
>  name: input/mouse0
>/class/misc/hw_random
>  name: hwrng
>  links: hw_random
>/class/sound/controlC0
>  name: snd/controlC0
>/class/sound/pcmC0D0c
>  name: snd/pcmC0D0c
>/class/sound/pcmC0D0p
>  name: snd/pcmC0D0p
>/class/sound/timer
>  name: snd/timer
>/class/usb/lp0
>  name: usb/lp0
>  links: usblp0
>/class/usb_device/usbdev1.1
>  name: usbdev1.1
>  links: bus/usb/1/1
>/class/usb_device/usbdev1.2
>  name: usbdev1.2
>  links: bus/usb/1/2
>>> int.13: device names
>>> int.14: soft raid
>----- soft raid devices -----
>----- soft raid devices end -----
>>> int.15: geo
>>> int.16: parent
>  prop read: rdCR.3wRL2_g4d2B (ok)
>  prop read: rdCR.lZF+r4EgHp4 (failed)
>  old prop read: rdCR.lZF+r4EgHp4 (failed)
>  prop read: rdCR.n_7QNeEnh23 (failed)
>  old prop read: rdCR.n_7QNeEnh23 (failed)
>  prop read: rdCR.EMpH5pjcahD (failed)
>  old prop read: rdCR.EMpH5pjcahD (failed)
>  prop read: rdCR.f5u1ucRm+H9 (failed)
>  old prop read: rdCR.f5u1ucRm+H9 (failed)
>  prop read: rdCR.8uRK7LxiIA2 (failed)
>  old prop read: rdCR.8uRK7LxiIA2 (failed)
>  prop read: rdCR.AJKleuxpiP0 (failed)
>  old prop read: rdCR.AJKleuxpiP0 (failed)
>  prop read: rdCR.hWmSPAStPX7 (failed)
>  old prop read: rdCR.hWmSPAStPX7 (failed)
>  prop read: rdCR.9N+EecqykME (failed)
>  old prop read: rdCR.9N+EecqykME (failed)
>  prop read: YMnp.ecK7NLYWZ5D (failed)
>  old prop read: YMnp.ecK7NLYWZ5D (failed)
>  prop read: rdCR.DziBbWO85o5 (failed)
>  old prop read: rdCR.DziBbWO85o5 (failed)
>  prop read: rdCR.CxwsZFjVASF (failed)
>  old prop read: rdCR.CxwsZFjVASF (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_3575 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_3576 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2482 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2448 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_248c (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_248a (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2483 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1002_4c59 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_125d_1988 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_11c1_450 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_104c_ac51_0 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_104c_ac51 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_1038 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1033_f2 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02_0 (failed)
>  prop read: z9pp.B+yZ9Ve8gC1 (failed)
>  old prop read: z9pp.B+yZ9Ve8gC1 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02 (failed)
>  prop read: QL3u.B+yZ9Ve8gC1 (failed)
>  old prop read: QL3u.B+yZ9Ve8gC1 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0200 (failed)
>  prop read: tWJy.ld94kxNGZf5 (failed)
>  old prop read: tWJy.ld94kxNGZf5 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0b00 (failed)
>  prop read: KiZ0.WYwRElrJa93 (failed)
>  old prop read: KiZ0.WYwRElrJa93 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c04 (failed)
>  prop read: ntp4.DE8RM9cWQQ8 (failed)
>  old prop read: ntp4.DE8RM9cWQQ8 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0800 (failed)
>  prop read: E349.bvKf3UMzZfE (failed)
>  old prop read: E349.bvKf3UMzZfE (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0303 (failed)
>  prop read: hEKD.xhndlW9HXJ7 (failed)
>  old prop read: hEKD.xhndlW9HXJ7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0f13 (failed)
>  prop read: NhVi.t7Yh1tpgb13 (failed)
>  old prop read: NhVi.t7Yh1tpgb13 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0a05 (failed)
>  prop read: qslm.SQ+K0pwodME (failed)
>  old prop read: qslm.SQ+K0pwodME (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0401 (failed)
>  prop read: H20r.YgT1Hy0M6x6 (failed)
>  old prop read: H20r.YgT1Hy0M6x6 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501 (failed)
>  prop read: iT2w.BuKI+1soRmD (failed)
>  old prop read: iT2w.BuKI+1soRmD (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0700 (failed)
>  prop read: 9fI_.yhTOLOXWEq7 (failed)
>  old prop read: 9fI_.yhTOLOXWEq7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_HWPc224 (failed)
>  prop read: cqY2.SjxBLRVrBsF (failed)
>  old prop read: cqY2.SjxBLRVrBsF (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_HWPc209 (failed)
>  prop read: 30p6.X24Zd5T8DM2 (failed)
>  old prop read: 30p6.X24Zd5T8DM2 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0 (failed)
>  prop read: S_Uw.3fyvFV+mbWD (failed)
>  old prop read: S_Uw.3fyvFV+mbWD (failed)
>  prop read: v9l_.a1uxQF+BEQ8 (failed)
>  old prop read: v9l_.a1uxQF+BEQ8 (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_63A63302389 (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_part1_size_1077479424 (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_1cdfa418_d6e5_43a8_9e1d_3a46d3b466bc (ok)
>  prop read: /org/freedesktop/Hal/devices/storage_model_UJDA340 (ok)
>  prop read: /org/freedesktop/Hal/devices/storage_model_DVD__RW_ND_6500A (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0 (failed)
>  prop read: k4bc.qgc3XmYMu2C (failed)
>  old prop read: k4bc.qgc3XmYMu2C (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if0 (failed)
>  prop read: cLrx.HeCmjfGEEB4 (failed)
>  old prop read: cLrx.HeCmjfGEEB4 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if1_printer_noserial (ok)
>  prop read: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input (ok)
>  prop read: /org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input (ok)
>  prop read: rdCR.j8NaKXDZtZ6 (failed)
>  old prop read: rdCR.j8NaKXDZtZ6 (failed)
>  prop read: rdCR.EY_qmtb9YY0 (failed)
>  old prop read: rdCR.EY_qmtb9YY0 (failed)
>  prop read: /org/freedesktop/Hal/devices/net_00_c0_9f_05_d0_38 (failed)
>  prop read: usDW.ndpeucax6V1 (failed)
>  old prop read: usDW.ndpeucax6V1 (failed)
>  prop read: ZsBS.GQNx7L4uPNA (failed)
>  old prop read: ZsBS.GQNx7L4uPNA (failed)
>  prop read: wl2P.nfEXJulusj6 (failed)
>  old prop read: wl2P.nfEXJulusj6 (failed)
>----- /proc/modules -----
>  joydev 9408 0 - Live 0xf0f72000
>  st 38944 0 - Live 0xf0fbd000
>  sd_mod 18576 0 - Live 0xf0f6c000
>  lp 11460 0 - Live 0xf0f50000
>  parport_pc 38980 1 - Live 0xf0fa6000
>  parport 33864 2 lp,parport_pc, Live 0xf0875000
>  subfs 7552 1 - Live 0xf0f54000
>  sg 35744 0 - Live 0xf0f9c000
>  sr_mod 16420 0 - Live 0xf0f5f000
>  sbp2 22408 1 - Live 0xf0f58000
>  scsi_mod 131304 5 st,sd_mod,sg,sr_mod,sbp2, Live 0xf0f7a000
>  ohci1394 32820 0 - Live 0xf0ec2000
>  ieee1394 97208 2 sbp2,ohci1394, Live 0xf0e9e000
>  ipt_pkttype 1664 1 - Live 0xf13d7000
>  ipt_LOG 6912 7 - Live 0xf13db000
>  ipt_limit 2304 7 - Live 0xf13d5000
>  cpufreq_ondemand 6044 0 - Live 0xf1397000
>  cpufreq_userspace 4444 0 - Live 0xf13bd000
>  cpufreq_powersave 1792 0 - Live 0xf1395000
>  speedstep_ich 5004 0 - Live 0xf13ba000
>  speedstep_lib 4228 1 speedstep_ich, Live 0xf13b7000
>  freq_table 4612 1 speedstep_ich, Live 0xf13a8000
>  pcc_acpi 12416 0 - Live 0xf13b2000
>  sony_acpi 5260 0 - Live 0xf13a5000
>  snd_pcm_oss 59040 0 - Live 0xf13c5000
>  snd_mixer_oss 18944 1 snd_pcm_oss, Live 0xf13ac000
>  button 7056 0 - Live 0xf12ca000
>  battery 10244 0 - Live 0xf13a1000
>  ac 5252 0 - Live 0xf1392000
>  edd 9824 0 - Live 0xf1338000
>  af_packet 21384 2 - Live 0xf139a000
>  ip6t_REJECT 5504 3 - Live 0xf137a000
>  ipt_REJECT 5632 3 - Live 0xf137d000
>  ipt_state 1920 12 - Live 0xf1378000
>  iptable_mangle 2688 0 - Live 0xf1334000
>  usbhid 43616 0 - Live 0xf1386000
>  iptable_nat 22228 0 - Live 0xf1364000
>  usblp 12544 0 - Live 0xf135f000
>  iptable_filter 2816 1 - Live 0xf1285000
>  pcmcia 37176 0 - Live 0xf1354000
>  firmware_class 9856 1 pcmcia, Live 0xf12ec000
>  ip6table_mangle 2304 0 - Live 0xf11eb000
>  ip_conntrack 42168 2 ipt_state,iptable_nat, Live 0xf1308000
>  snd_maestro3 24740 1 - Live 0xf131e000
>  ip_tables 19456 8 ipt_pkttype,ipt_LOG,ipt_limit,ipt_REJECT,ipt_state,iptable_mangle,iptable_nat,iptable_filter, Live 0xf12db000
>  snd_ac97_codec 90876 1 snd_maestro3, Live 0xf133c000
>  e100 35456 0 - Live 0xf1314000
>  mii 5504 1 e100, Live 0xf12c7000
>  snd_ac97_bus 2432 1 snd_ac97_codec, Live 0xf1064000
>  yenta_socket 23820 3 - Live 0xf12d4000
>  rsrc_nonstatic 12800 1 yenta_socket, Live 0xf11e2000
>  pcmcia_core 39952 3 pcmcia,yenta_socket,rsrc_nonstatic, Live 0xf12e1000
>  snd_pcm 93064 3 snd_pcm_oss,snd_maestro3,snd_ac97_codec, Live 0xf12f0000
>  snd_timer 24452 1 snd_pcm, Live 0xf12cd000
>  snd 60420 8 snd_pcm_oss,snd_mixer_oss,snd_maestro3,snd_ac97_codec,snd_pcm,snd_timer, Live 0xf1275000
>  soundcore 9184 1 snd, Live 0xf11fa000
>  snd_page_alloc 10632 1 snd_pcm, Live 0xf11f6000
>  i2c_i801 8844 0 - Live 0xf11e7000
>  i2c_core 20368 1 i2c_i801, Live 0xf11d5000
>  ip6table_filter 2688 1 - Live 0xf1062000
>  uhci_hcd 32016 0 - Live 0xf11ed000
>  ip6_tables 18176 3 ip6t_REJECT,ip6table_mangle,ip6table_filter, Live 0xf11dc000
>  generic 4484 0 [permanent], Live 0xf105f000
>  shpchp 88676 0 - Live 0xf125e000
>  pci_hotplug 26164 1 shpchp, Live 0xf11cd000
>  hw_random 5268 0 - Live 0xf1035000
>  usbcore 112640 4 usbhid,usblp,uhci_hcd, Live 0xf1241000
>  ipv6 242752 11 ip6t_REJECT, Live 0xf1287000
>  intel_agp 22044 1 - Live 0xf103c000
>  agpgart 33096 1 intel_agp, Live 0xf11c3000
>  dm_mod 54972 0 - Live 0xf1044000
>  reiserfs 250480 1 - Live 0xf1066000
>  fan 4996 0 - Live 0xf085f000
>  ide_cd 39684 0 - Live 0xf0868000
>  cdrom 36896 2 sr_mod,ide_cd, Live 0xf0836000
>  thermal 14472 0 - Live 0xf080b000
>  processor 24252 1 thermal, Live 0xf0855000
>  piix 9988 0 [permanent], Live 0xf082a000
>  ide_disk 17152 3 - Live 0xf0830000
>  ide_core 122380 4 generic,ide_cd,piix,ide_disk, Live 0xf1002000
>----- /proc/modules end -----
>  used irqs: 0,1,2,3,4,5,6,7,8,9,10,12,14,15
>=========== end debug info ============
>01: None 00.0: 0102 Floppy disk controller
>  [Created at floppy.112]
>  Unique ID: rdCR.3wRL2_g4d2B
>  Hardware Class: storage
>  Model: "Floppy disk controller"
>  I/O Ports: 0x3f2-0x3f5 (rw)
>  DMA: 2
>  IRQ: 6 (17 events)
>  I/O Port: 0x3f7 (rw)
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>03: None 00.0: 10105 BIOS
>  [Created at bios.154]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: off
>    Caps Lock: off
>  Serial Port 0: 0x3f8
>  Serial Port 1: 0x2f8
>  Parallel Port 0: 0x378
>  Base Memory: 637 kB
>  PnP BIOS: @@@0000
>  BIOS: extended read supported
>  BIOS32 Service Directory Entry: 0xfd7f2
>  SMBIOS Version: 2.3
>  BIOS Info: #0
>    Vendor: "Phoenix Technologies Ltd."
>    Version: "EB.M2.20"
>    Date: "02/27/02"
>    Start Address: 0xe3060
>    ROM Size: 512 kB
>    Features: 0x01870000000000005f90
>      ISA supported
>      PCI supported
>      PCMCIA supported
>      PnP supported
>      APM supported
>      BIOS flashable
>      BIOS shadowing allowed
>      ESCD supported
>      ACPI supported
>      USB Legacy supported
>      AGP supported
>      Smart Battery supported
>      BIOS Boot Spec supported
>  System Info: #1
>    Manufacturer: "Hewlett-Packard"
>    Product: "HP OmniBook PC"
>    Version: "HP OmniBook 6100 EB"
>    Serial: "TW20607941"
>    UUID: undefined, but settable
>    Wake-up: 0x06 (Power Switch)
>  Board Info: #2
>    Manufacturer: "Hewlett-Packard"
>    Product: "HP OmniBook PC"
>    Version: "6100EB"
>    Serial: "None"
>  Chassis Info: #3
>    Manufacturer: "Hewlett-Packard"
>    Version: "N/A"
>    Serial: "None"
>    Asset Tag: "No Asset Tag"
>    Type: 0x0a (Notebook)
>    Bootup State: 0x03 (Safe)
>    Power Supply State: 0x03 (Safe)
>    Thermal State: 0x03 (Safe)
>    Security Status: 0x03 (None)
>    OEM Info: 0x00001234
>  Processor Info: #4
>    Socket: "U1"
>    Socket Type: 0x08 (Slot 1)
>    Socket Status: Populated
>    Type: 0x03 (CPU)
>    Family: 0x11 (Pentium III)
>    Manufacturer: "GenuineIntel"
>    Version: "Pentium(R) III-M"
>    Processor ID: 0x0383f9ff000006b1
>    Status: 0x01 (Enabled)
>    Voltage: 3.3 V
>    Max. Speed: 750 MHz
>    Current Speed: 1000 MHz
>    L1 Cache: #8
>    L2 Cache: #9
>  Type 5 Record: #5
>    Data 00: 05 14 05 00 03 04 03 03 08 0c 00 18 05 02 02 06
>    Data 10: 00 07 00 04
>  Type 6 Record: #6
>    Data 00: 06 0c 06 00 01 01 85 00 05 89 89 00
>    String 1: "DIMM-1"
>  Type 6 Record: #7
>    Data 00: 06 0c 07 00 01 23 85 00 05 88 88 00
>    String 1: "DIMM-2"
>  Cache Info: #8
>    Designation: "L1 Cache"
>    Level: L1
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x02 (Unknown)
>    Associativity: 0x02 (Unknown)
>    Max. Size: 16 kB
>    Current Size: 16 kB
>    Supported SRAM Types: 0x0058 (Burst, Pipeline Burst, Asynchronous)
>    Current SRAM Type: 0x0040 (Asynchronous)
>  Cache Info: #9
>    Designation: "L2 Cache"
>    Level: L2
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x01 (External, Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x02 (Unknown)
>    Associativity: 0x02 (Unknown)
>    Max. Size: 512 kB
>    Current Size: 512 kB
>    Supported SRAM Types: 0x0058 (Burst, Pipeline Burst, Asynchronous)
>    Current SRAM Type: 0x0008 (Burst)
>  Port Connector: #10
>    Type: 0x09 (Serial Port 16550A Compatible)
>    Internal Designator: "J19"
>    External Designator: "COM 1"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #11
>    Type: 0x05 (Parallel Port ECP/EPP)
>    Internal Designator: "J23"
>    External Designator: "Parallel"
>    External Connector: 0x05 (DB-25 pin female)
>  Port Connector: #12
>    Type: 0x0d (Keyboard Port)
>    Internal Designator: "J11"
>    External Designator: "Keyboard"
>    External Connector: 0x14 (Circular DIN-8 male)
>  Port Connector: #13
>    Type: 0x0d (Keyboard Port)
>    Internal Designator: "J12"
>    External Designator: "PS/2 Mouse"
>    External Connector: 0x14 (Circular DIN-8 male)
>  System Slot: #14
>    Designation: "PCI Slot J11"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x02 (Unknown)
>    Length: 0x04 (Long)
>    Slot ID: 0
>    Characteristics: 0x0006 (5.0 V, 3.3 V)
>  System Slot: #15
>    Designation: "PCI Slot J12"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x02 (Unknown)
>    Length: 0x04 (Long)
>    Slot ID: 0
>    Characteristics: 0x0006 (5.0 V, 3.3 V)
>  System Slot: #16
>    Designation: "PCI Slot J13"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x02 (Unknown)
>    Length: 0x04 (Long)
>    Slot ID: 0
>    Characteristics: 0x0006 (5.0 V, 3.3 V)
>  On Board Devices: #17
>    Video: "ATI MOBILITY P6 AGP VGA"
>    Sound: "ESS 1988 PCI Audio"
>    Other: "NS LPC"
>  OEM Strings: #18
>    Hewlett-Packard OmniBook Series
>    Service ID: 12061
>    $MODEL: F3260
>    $OS:
>    $LOCAL: ABD
>    $OPTION:
>    $DC:
>  System Config Options (Jumpers & Switches) #19:
>    Jumper settings can be described here.
>  Language Info: #20
>    Languages: en|US|iso8859-1
>  Type 15 Record: #21
>    Data 00: 0f 17 15 00 10 00 00 00 10 00 80 01 00 00 00 00
>    Data 10: 00 00 00 00 01 00 02
>  Physical Memory Array: #22
>    Use: 0x03 (System memory)
>    Location: 0x03 (Motherboard)
>    Slots: 2
>    Max. Size: 512 MB
>    ECC: 0x03 (None)
>  Memory Device: #23
>    Location: "M1"
>    Bank: "Bank 0"
>    Memory Array: #22
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 32 bits
>    Size: 512 MB
>  Memory Device: #24
>    Location: "M2"
>    Bank: "Bank 1"
>    Memory Array: #22
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 32 bits
>    Size: 256 MB
>  Memory Array Mapping: #25
>    Memory Array: #22
>    Partition Width: 2
>    Start Address: 0x00000000
>    End Address: 0x30000000
>  Memory Device Mapping: #26
>    Memory Device: #23
>    Array Mapping: #25
>    Start Address: 0x00000000
>    End Address: 0x20000000
>  Memory Device Mapping: #27
>    Memory Device: #24
>    Array Mapping: #25
>    Start Address: 0x20000000
>    End Address: 0x30000000
>  Type 23 Record: #28
>    Data 00: 17 0d 1c 00 3f ff ff ff ff ff ff ff ff
>  Hardware Security: #29
>    Power-on Password: 0x01 (Enabled)
>    Keyboard Password: 0x03 (Unknown)
>    Admin Password: 0x01 (Enabled)
>    Front Panel Reset: 0x03 (Unknown)
>  System Power Controls: #30
>    Next Power-on: 23:59:59 31/12
>  Type 26 Record: #31
>    Data 00: 1a 14 1f 00 01 63 00 80 00 80 00 80 00 80 00 80
>    Data 10: 00 00 00 00
>    String 1: "Voltage Probe"
>  Type 27 Record: #32
>    Data 00: 1b 0c 20 00 21 00 63 00 00 00 00 00
>  Type 28 Record: #33
>    Data 00: 1c 14 21 00 01 63 00 80 00 80 00 80 00 80 00 80
>    Data 10: 00 00 00 00
>    String 1: "Temperature Probe"
>  Type 29 Record: #34
>    Data 00: 1d 14 22 00 01 63 00 80 00 80 00 80 00 80 00 80
>    Data 10: 00 00 00 00
>    String 1: "Electrical Current Probe"
>  Type 30 Record: #35
>    Data 00: 1e 06 23 00 01 01
>    String 1: "Intel"
>  Type 32 Record: #36
>    Data 00: 20 14 24 00 00 00 00 00 00 00 0c 01 02 03 04 05
>    Data 10: 06 07 08 09
>  Type 128 Record: #37
>    Data 00: 80 0f 25 00 48 50 14 45 42 ee 45 00 f0 93 00
>  Type 140 Record: #38
>    Data 00: 8c 24 26 00 00 00 00 00 00 60 01 7d 00 7c 01 7d
>    Data 10: 00 00 00 01 ff ff ff ff ff ff ff ff 00 00 00 00
>    Data 20: 00 00 00 00
>  Inactive Record: #39
>    Data 00: 7e 04 27 00
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>04: None 00.0: 10107 System
>  [Created at sys.56]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>05: None 00.0: 10104 FPU
>  [Created at misc.190]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.204]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0800 PIC (8259)
>  [Created at misc.217]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  IRQ: 2 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 0802 Timer (8254)
>  [Created at misc.228]
>  Unique ID: rdCR.AJKleuxpiP0
>  Hardware Class: unknown
>  Model: "Timer"
>  IRQ: 0 (261135 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>09: None 00.0: 0803 RTC (Generic)
>  [Created at misc.239]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (2 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>10: None 00.0: 0900 Keyboard controller
>  [Created at misc.249]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>11: None 00.0: 0701 Parallel controller (SPP)
>  [Created at misc.260]
>  Unique ID: YMnp.ecK7NLYWZ5D
>  Hardware Class: unknown
>  Model: "Parallel controller"
>  Device File: /dev/lp0
>  I/O Ports: 0x378-0x37a (rw)
>  I/O Ports: 0x778-0x77a (rw)
>  DMA: 1
>  IRQ: 7 (133 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>12: None 00.0: 10400 PS/2 Controller
>  [Created at misc.302]
>  Unique ID: rdCR.DziBbWO85o5
>  Hardware Class: unknown
>  Model: "PS/2 Controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>14: None 00.0: 10102 Main Memory
>  [Created at memory.59]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0x2ff5ffff (rw)
>  Memory Size: 768 MB
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>15: PCI(AGP) 00.0: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_3575
>  Unique ID: qLht.G0kXI0VtzI9
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "Illegal Vendor ID 82830 830 Chipset Host Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x3575 "82830 830 Chipset Host Bridge"
>  SubVendor: pci 0xffff "Illegal Vendor ID"
>  SubDevice: pci 0xffff 
>  Revision: 0x02
>  Driver: "agpgart-intel"
>  Memory Range: 0xe0000000-0xefffffff (rw,prefetchable)
>  Module Alias: "pci:v00008086d00003575sv0000FFFFsd0000FFFFbc06sc00i00"
>  Driver Info #0:
>    Driver Status: intel_agp is active
>    Driver Activation Cmd: "modprobe intel_agp"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>16: PCI 01.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_3576
>  Unique ID: vSkL.7ikikoAJ7O0
>  SysFS ID: /devices/pci0000:00/0000:00:01.0
>  SysFS BusID: 0000:00:01.0
>  Hardware Class: bridge
>  Model: "Intel 82830 830 Chipset AGP Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x3576 "82830 830 Chipset AGP Bridge"
>  Revision: 0x02
>  Module Alias: "pci:v00008086d00003576sv00000000sd00000000bc06sc04i00"
>  Driver Info #0:
>    Driver Status: shpchp is active
>    Driver Activation Cmd: "modprobe shpchp"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>17: PCI 1d.0: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2482
>  Unique ID: 1GTX.6UF_tdnOPbB
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0
>  SysFS BusID: 0000:00:1d.0
>  Hardware Class: usb controller
>  Model: "Hewlett-Packard Company 82801CA/CAM USB (Hub #1)"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2482 "82801CA/CAM USB (Hub #1)"
>  SubVendor: pci 0x103c "Hewlett-Packard Company"
>  SubDevice: pci 0x001a 
>  Revision: 0x01
>  Driver: "uhci_hcd"
>  I/O Ports: 0x1800-0x181f (rw)
>  IRQ: 10 (4469 events)
>  Module Alias: "pci:v00008086d00002482sv0000103Csd0000001Abc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>18: PCI 1e.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2448
>  Unique ID: 6NW+.+nd8koiLHvC
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0
>  SysFS BusID: 0000:00:1e.0
>  Hardware Class: bridge
>  Model: "Intel 82801 Mobile PCI Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2448 "82801 Mobile PCI Bridge"
>  Revision: 0x41
>  Module Alias: "pci:v00008086d00002448sv00000000sd00000000bc06sc04i00"
>  Driver Info #0:
>    Driver Status: hw_random is active
>    Driver Activation Cmd: "modprobe hw_random"
>  Driver Info #1:
>    Driver Status: shpchp is active
>    Driver Activation Cmd: "modprobe shpchp"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>19: PCI 1f.0: 0601 ISA bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_248c
>  Unique ID: BUZT.Wpga1Ba6g1F
>  SysFS ID: /devices/pci0000:00/0000:00:1f.0
>  SysFS BusID: 0000:00:1f.0
>  Hardware Class: bridge
>  Model: "Intel 82801CAM ISA Bridge (LPC)"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x248c "82801CAM ISA Bridge (LPC)"
>  Revision: 0x01
>  Module Alias: "pci:v00008086d0000248Csv00000000sd00000000bc06sc01i00"
>  Driver Info #0:
>    Driver Status: i8xx_tco is not active
>    Driver Activation Cmd: "modprobe i8xx_tco"
>  Driver Info #1:
>    Driver Status: tpm_atmel is not active
>    Driver Activation Cmd: "modprobe tpm_atmel"
>  Driver Info #2:
>    Driver Status: tpm_nsc is not active
>    Driver Activation Cmd: "modprobe tpm_nsc"
>  Driver Info #3:
>    Driver Status: tpm_infineon is not active
>    Driver Activation Cmd: "modprobe tpm_infineon"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>20: PCI 1f.1: 0101 IDE interface
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_248a
>  Unique ID: 3p2J.BypuGdyDvo4
>  SysFS ID: /devices/pci0000:00/0000:00:1f.1
>  SysFS BusID: 0000:00:1f.1
>  Hardware Class: storage
>  Model: "Hewlett-Packard Company 82801CAM IDE U100"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x248a "82801CAM IDE U100"
>  SubVendor: pci 0x103c "Hewlett-Packard Company"
>  SubDevice: pci 0x001a 
>  Revision: 0x01
>  Driver: "PIIX_IDE"
>  I/O Ports: 0x1820-0x182f (rw)
>  Memory Range: 0xd0000000-0xd00003ff (rw,non-prefetchable)
>  IRQ: 5 (398 events)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  I/O Ports: 0x170-0x177 (rw)
>  I/O Port: 0x376 (rw)
>  IRQ: 14 (13737 events)
>  IRQ: 15 (9207 events)
>  Module Alias: "pci:v00008086d0000248Asv0000103Csd0000001Abc01sc01i8a"
>  Driver Info #0:
>    Driver Status: piix is active
>    Driver Activation Cmd: "modprobe piix"
>  Driver Info #1:
>    Driver Status: generic is active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>
>21: PCI 1f.3: 0c05 SMBus
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2483
>  Unique ID: nS1_.fJ49ulvCLDA
>  SysFS ID: /devices/pci0000:00/0000:00:1f.3
>  SysFS BusID: 0000:00:1f.3
>  Hardware Class: unknown
>  Model: "Hewlett-Packard Company 82801CA/CAM SMBus Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2483 "82801CA/CAM SMBus Controller"
>  SubVendor: pci 0x103c "Hewlett-Packard Company"
>  SubDevice: pci 0x001a 
>  Revision: 0x01
>  Driver: "i801_smbus"
>  I/O Ports: 0x1840-0x185f (rw)
>  IRQ: 10 (4469 events)
>  Module Alias: "pci:v00008086d00002483sv0000103Csd0000001Abc0Csc05i00"
>  Driver Info #0:
>    Driver Status: i2c_i801 is active
>    Driver Activation Cmd: "modprobe i2c_i801"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>22: PCI(AGP) 100.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1002_4c59
>  Unique ID: VCu0.a_ek0MUSnnB
>  Parent ID: vSkL.7ikikoAJ7O0
>  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
>  SysFS BusID: 0000:01:00.0
>  Hardware Class: graphics card
>  Model: "Hewlett-Packard Company Radeon LY"
>  Vendor: pci 0x1002 "ATI Technologies Inc"
>  Device: pci 0x4c59 "Radeon LY"
>  SubVendor: pci 0x103c "Hewlett-Packard Company"
>  SubDevice: pci 0x001a 
>  Memory Range: 0xd8000000-0xdfffffff (rw,prefetchable)
>  I/O Ports: 0x2000-0x2fff (rw)
>  Memory Range: 0xd0100000-0xd010ffff (rw,non-prefetchable)
>  Memory Range: 0xd0120000-0xd013ffff (ro,prefetchable,disabled)
>  IRQ: 10 (4469 events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Module Alias: "pci:v00001002d00004C59sv0000103Csd0000001Abc03sc00i00"
>  Driver Info #0:
>    XFree86 v4 Server Module: radeon
>  Driver Info #1:
>    XFree86 v4 Server Module: radeon
>    3D Support: yes
>    Color Depths: 16
>    Extensions: dri
>    Options: 
>  Config Status: cfg=yes, avail=yes, need=yes, active=unknown
>  Attached to: #16 (PCI bridge)
>
>23: PCI 203.0: 0401 Multimedia audio controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_125d_1988
>  Unique ID: QOEa.fio0_AzF2_D
>  Parent ID: 6NW+.+nd8koiLHvC
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:03.0
>  SysFS BusID: 0000:02:03.0
>  Hardware Class: sound
>  Model: "Hewlett-Packard Company ES1988 Allegro-1"
>  Vendor: pci 0x125d "ESS Technology"
>  Device: pci 0x1988 "ES1988 Allegro-1"
>  SubVendor: pci 0x103c "Hewlett-Packard Company"
>  SubDevice: pci 0x001a 
>  Revision: 0x12
>  Driver: "Maestro3"
>  I/O Ports: 0x3000-0x3fff (rw)
>  IRQ: 5 (398 events)
>  Module Alias: "pci:v0000125Dd00001988sv0000103Csd0000001Abc04sc01i00"
>  Driver Info #0:
>    Driver Status: maestro3 is not active
>    Driver Activation Cmd: "modprobe maestro3"
>  Driver Info #1:
>    Driver Status: snd_maestro3 is active
>    Driver Activation Cmd: "modprobe snd_maestro3"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>  Attached to: #18 (PCI bridge)
>
>24: PCI 204.0: 10203 LinModem
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_11c1_450
>  Unique ID: UVH2.IWjdZk14rH3
>  Parent ID: 6NW+.+nd8koiLHvC
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:04.0
>  SysFS BusID: 0000:02:04.0
>  Hardware Class: modem
>  Model: "AMBIT Microsystem LT WinModem"
>  Vendor: pci 0x11c1 "Agere Systems"
>  Device: pci 0x0450 "LT WinModem"
>  SubVendor: pci 0x1468 "AMBIT Microsystem Corp."
>  SubDevice: pci 0x0450 
>  Revision: 0x02
>  Device File: /dev/ttyLT0
>  Device Number: char 62:64
>  Memory Range: 0xd0201000-0xd02010ff (rw,non-prefetchable)
>  I/O Ports: 0x3840-0x3847 (rw)
>  I/O Ports: 0x3400-0x34ff (rw)
>  IRQ: 10 (4469 events)
>  Module Alias: "pci:v000011C1d00000450sv00001468sd00000450bc07sc80i00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #18 (PCI bridge)
>
>25: PCI 205.0: 0607 CardBus bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_104c_ac51_0
>  Unique ID: ZcKW.mUQqPGVkss0
>  Parent ID: 6NW+.+nd8koiLHvC
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:05.0
>  SysFS BusID: 0000:02:05.0
>  Hardware Class: bridge
>  Model: "Hewlett-Packard Company PCI1420"
>  Vendor: pci 0x104c "Texas Instruments"
>  Device: pci 0xac51 "PCI1420"
>  SubVendor: pci 0x103c "Hewlett-Packard Company"
>  SubDevice: pci 0x001a 
>  Driver: "yenta_cardbus"
>  Memory Range: 0xd0202000-0xd0202fff (rw,non-prefetchable)
>  IRQ: 10 (4469 events)
>  Module Alias: "pci:v0000104Cd0000AC51sv0000103Csd0000001Abc06sc07i00"
>  Driver Info #0:
>    Driver Status: yenta_socket is active
>    Driver Activation Cmd: "modprobe yenta_socket"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #18 (PCI bridge)
>
>26: PCI 205.1: 0607 CardBus bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_104c_ac51
>  Unique ID: RxpL.mUQqPGVkss0
>  Parent ID: 6NW+.+nd8koiLHvC
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1
>  SysFS BusID: 0000:02:05.1
>  Hardware Class: bridge
>  Model: "Hewlett-Packard Company PCI1420"
>  Vendor: pci 0x104c "Texas Instruments"
>  Device: pci 0xac51 "PCI1420"
>  SubVendor: pci 0x103c "Hewlett-Packard Company"
>  SubDevice: pci 0x001a 
>  Driver: "yenta_cardbus"
>  Memory Range: 0xd0203000-0xd0203fff (rw,non-prefetchable)
>  IRQ: 10 (4469 events)
>  Module Alias: "pci:v0000104Cd0000AC51sv0000103Csd0000001Abc06sc07i00"
>  Driver Info #0:
>    Driver Status: yenta_socket is active
>    Driver Activation Cmd: "modprobe yenta_socket"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #18 (PCI bridge)
>
>27: PCI 208.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_1038
>  Unique ID: rBUF.R9cTPt3QL_C
>  Parent ID: 6NW+.+nd8koiLHvC
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:08.0
>  SysFS BusID: 0000:02:08.0
>  Hardware Class: network
>  Model: "Hewlett-Packard Company 82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x1038 "82801CAM (ICH3) PRO/100 VM (KM) Ethernet Controller"
>  SubVendor: pci 0x103c "Hewlett-Packard Company"
>  SubDevice: pci 0x001a 
>  Revision: 0x41
>  Driver: "e100"
>  Device File: eth0
>  Memory Range: 0xd0200000-0xd0200fff (rw,non-prefetchable)
>  I/O Ports: 0x3800-0x383f (rw)
>  IRQ: 10 (4469 events)
>  HW Address: 00:c0:9f:05:d0:38
>  Link detected: yes
>  Module Alias: "pci:v00008086d00001038sv0000103Csd0000001Abc02sc00i00"
>  Driver Info #0:
>    Driver Status: e100 is active
>    Driver Activation Cmd: "modprobe e100"
>  Driver Info #1:
>    Driver Status: eepro100 is not active
>    Driver Activation Cmd: "modprobe eepro100"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #18 (PCI bridge)
>
>28: PCI 700.0: 0c00 FireWire (IEEE 1394) (OHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1033_f2
>  Unique ID: aK5u.7lq06bBmMPE
>  Parent ID: RxpL.mUQqPGVkss0
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0
>  SysFS BusID: 0000:07:00.0
>  Hardware Class: firewire controller
>  Model: "NEC uPD72874 IEEE1394 OHCI 1.1 3-port PHY-Link Ctrlr"
>  Hotplug: CardBus
>  Socket: 1
>  Vendor: pci 0x1033 "NEC Corporation"
>  Device: pci 0x00f2 "uPD72874 IEEE1394 OHCI 1.1 3-port PHY-Link Ctrlr"
>  SubVendor: pci 0x1033 "NEC Corporation"
>  SubDevice: pci 0x00ce 
>  Revision: 0x01
>  Driver: "ohci1394"
>  Memory Range: 0x36000000-0x36000fff (rw,non-prefetchable)
>  Memory Range: 0x36001000-0x360010ff (rw,non-prefetchable)
>  Memory Range: 0x36001100-0x360011ff (rw,non-prefetchable)
>  IRQ: 10 (4469 events)
>  Module Alias: "pci:v00001033d000000F2sv00001033sd000000CEbc0Csc00i10"
>  Driver Info #0:
>    Driver Status: ohci1394 is active
>    Driver Activation Cmd: "modprobe ohci1394"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #26 (CardBus bridge)
>
>29: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_0
>  Unique ID: z9pp.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:00
>  SysFS BusID: 00:00
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>30: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02
>  Unique ID: QL3u.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:01
>  SysFS BusID: 00:01
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>31: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
>  Unique ID: tWJy.ld94kxNGZf5
>  SysFS ID: /devices/pnp0/00:02
>  SysFS BusID: 00:02
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0200 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>32: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
>  Unique ID: KiZ0.WYwRElrJa93
>  SysFS ID: /devices/pnp0/00:03
>  SysFS BusID: 00:03
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0b00 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>33: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
>  Unique ID: ntp4.DE8RM9cWQQ8
>  SysFS ID: /devices/pnp0/00:04
>  SysFS BusID: 00:04
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c04 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>34: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0800
>  Unique ID: E349.bvKf3UMzZfE
>  SysFS ID: /devices/pnp0/00:05
>  SysFS BusID: 00:05
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0800 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>35: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0303
>  Unique ID: hEKD.xhndlW9HXJ7
>  SysFS ID: /devices/pnp0/00:06
>  SysFS BusID: 00:06
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0303 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>36: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0f13
>  Unique ID: NhVi.t7Yh1tpgb13
>  SysFS ID: /devices/pnp0/00:07
>  SysFS BusID: 00:07
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0f13 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>37: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0a05
>  Unique ID: qslm.SQ+K0pwodME
>  SysFS ID: /devices/pnp0/00:08
>  SysFS BusID: 00:08
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0a05 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>38: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0401
>  Unique ID: H20r.YgT1Hy0M6x6
>  SysFS ID: /devices/pnp0/00:09
>  SysFS BusID: 00:09
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0401 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>39: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501
>  Unique ID: iT2w.BuKI+1soRmD
>  SysFS ID: /devices/pnp0/00:0a
>  SysFS BusID: 00:0a
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0501 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>40: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0700
>  Unique ID: 9fI_.yhTOLOXWEq7
>  SysFS ID: /devices/pnp0/00:0b
>  SysFS BusID: 00:0b
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0700 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>41: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_HWPc224
>  Unique ID: cqY2.SjxBLRVrBsF
>  SysFS ID: /devices/pnp0/00:0c
>  SysFS BusID: 00:0c
>  Hardware Class: unknown
>  Model: "HP Unclassified device"
>  SubVendor: HWP "HP"
>  SubDevice: eisa 0xc224 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>42: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_HWPc209
>  Unique ID: 30p6.X24Zd5T8DM2
>  SysFS ID: /devices/pnp0/00:0d
>  SysFS BusID: 00:0d
>  Hardware Class: unknown
>  Model: "HP Unclassified device"
>  SubVendor: HWP "HP"
>  SubDevice: eisa 0xc209 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>43: None 00.0: 0700 Serial controller (16550)
>  [Created at serial.73]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_0
>  Unique ID: S_Uw.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS0
>  I/O Ports: 0x3f8-0x3ff (rw)
>  IRQ: 4 (9 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>44: None 00.1: 0700 Serial controller (16550)
>  [Created at serial.73]
>  Unique ID: v9l_.a1uxQF+BEQ8
>  Hardware Class: unknown
>  Model: "NS16550A"
>  Device: "NS16550A"
>  Device File: /dev/ttyS1
>  I/O Ports: 0x2f8-0x2ff (rw)
>  IRQ: 3 (9 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>45: IDE 00.0: 10600 Disk
>  [Created at block.188]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_63A63302389
>  Unique ID: l_yX.fWYFQV_f__1
>  Parent ID: 3p2J.BypuGdyDvo4
>  SysFS ID: /block/hda
>  SysFS BusID: 0.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  Hardware Class: disk
>  Model: "IC25N020ATDA04-0"
>  Device: "IC25N020ATDA04-0"
>  Revision: "DA3OA76A"
>  Serial ID: "63A63302389"
>  Driver: "PIIX_IDE", "ide-disk", "ide-disk"
>  Device File: /dev/disk/by-id/ata-IC25N020ATDA04-0_63A63302389
>  Device Files: /dev/hda, /dev/disk/by-id/ata-IC25N020ATDA04-0_63A63302389, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0
>  Device Number: block 3:0-3:63
>  BIOS id: 0x80
>  Geometry (Logical): CHS 38760/16/63
>  Size: 39070080 sectors a 512 bytes
>  Geometry (BIOS EDD): CHS 41344/15/63
>  Size (BIOS EDD): 39070080 sectors
>  Geometry (BIOS Legacy): CHS 1023/240/63
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #20 (IDE interface)
>
>46: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_part1_size_1077479424
>  Unique ID: 0fbI.SE1wIdpsiiC
>  Parent ID: l_yX.fWYFQV_f__1
>  SysFS ID: /block/hda/hda1
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-IC25N020ATDA04-0_63A63302389-part1
>  Device Files: /dev/hda1, /dev/disk/by-id/ata-IC25N020ATDA04-0_63A63302389-part1, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0-part1
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #45 (Disk)
>
>47: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_1cdfa418_d6e5_43a8_9e1d_3a46d3b466bc
>  Unique ID: TqrM.SE1wIdpsiiC
>  Parent ID: l_yX.fWYFQV_f__1
>  SysFS ID: /block/hda/hda2
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-IC25N020ATDA04-0_63A63302389-part2
>  Device Files: /dev/hda2, /dev/disk/by-id/ata-IC25N020ATDA04-0_63A63302389-part2, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0-part2, /dev/disk/by-uuid/1cdfa418-d6e5-43a8-9e1d-3a46d3b466bc
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #45 (Disk)
>
>48: IDE 02.0: 10602 CD-ROM (CD-RW)
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_model_UJDA340
>  Unique ID: 90A1.soBEStSN+ZF
>  Parent ID: 3p2J.BypuGdyDvo4
>  SysFS ID: /block/hdc
>  SysFS BusID: 1.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide1/1.0
>  Hardware Class: cdrom
>  Model: "UJDA340"
>  Device: "UJDA340"
>  Revision: "1.50"
>  Driver: "PIIX_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/cdrecorder
>  Device Files: /dev/hdc, /dev/cdrecorder, /dev/disk/by-path/pci-0000:00:1f.1-ide-1:0
>  Device Number: block 22:0
>  Features: CD-R, CD-RW
>  Size: 0 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #20 (IDE interface)
>  Drive Speed: 24
>
>49: SCSI 00.0: 10602 CD-ROM (DVD)
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_model_DVD__RW_ND_6500A
>  Unique ID: twPO.GBmO3vR+j78
>  Parent ID: aK5u.7lq06bBmMPE
>  SysFS ID: /block/sr0
>  SysFS BusID: 0:0:0:0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:02:05.1/0000:07:00.0/fw-host0/00d04b481208d89e/00d04b481208d89e-0/host0/target0:0:0/0:0:0:0
>  Hardware Class: cdrom
>  Model: "_NEC DVD+-RW ND-6500A"
>  Vendor: "_NEC"
>  Device: "DVD+-RW ND-6500A"
>  Revision: "2.22"
>  Driver: "sbp2", "sr"
>  Device File: /dev/cdrom (/dev/sg0)
>  Device Files: /dev/sr0, /dev/cdrom, /dev/disk/by-id/ieee1394-00d04b481208d89e:0:0
>  Device Number: block 11:0 (char 21:0)
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #28 (FireWire (IEEE 1394))
>  Drive Speed: 24
>  Volume ID: "DVDVOLUME"
>  Application: "SONIC SOLUTIONS IMAGESCRIPT (28374)"
>  Creation date: "2003100817374300"
>
>50: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0
>  Unique ID: k4bc.qgc3XmYMu2C
>  Parent ID: 1GTX.6UF_tdnOPbB
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-9-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-9-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.0"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #17 (USB Controller)
>
>51: USB 00.0: 0000 Unclassified device
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if0
>  Unique ID: cLrx.HeCmjfGEEB4
>  Parent ID: k4bc.qgc3XmYMu2C
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0
>  SysFS BusID: 1-2:1.0
>  Hardware Class: unknown
>  Model: "Lexmark International 4200 Series"
>  Hotplug: USB
>  Vendor: usb 0x043d "Lexmark International Inc."
>  Device: usb 0x008a "4200 Series"
>  Revision: "0.01"
>  Serial ID: "20050201-084445"
>  Speed: 12 Mbps
>  Module Alias: "usb:v043Dp008Ad0001dc00dsc00dp00icFFiscFFipFF"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #50 (Hub)
>
>52: USB 00.1: 10900 Printer
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_43d_8a_20050201_084445_if1_printer_noserial
>  Unique ID: 3X50.Zi7hSGUk_47
>  Parent ID: k4bc.qgc3XmYMu2C
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1
>  SysFS BusID: 1-2:1.1
>  Hardware Class: printer
>  Model: "Lexmark 4200 Series"
>  Hotplug: USB
>  Vendor: usb 0x043d "Lexmark International Inc."
>  Device: usb 0x008a "4200 Series"
>  SubVendor: "Lexmark "
>  SubDevice: "4200 Series"
>  Revision: "0.01"
>  Serial ID: "20050201-084445"
>  Driver: "usblp"
>  Device File: /dev/usb/lp0
>  Device Number: char 180:0
>  Speed: 12 Mbps
>  Module Alias: "usb:v043Dp008Ad0001dc00dsc00dp00ic07isc01ip02"
>  Driver Info #0:
>    Driver Status: usblp is active
>    Driver Activation Cmd: "modprobe usblp"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>  Attached to: #50 (Hub)
>
>54: PS/2 00.0: 10800 Keyboard
>  [Created at input.137]
>  UDI: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input
>  Unique ID: EXC1.TBWTwSuMeW2
>  Hardware Class: keyboard
>  Model: "AT Translated Set 2 keyboard"
>  Vendor: int 0x0211 
>  Device: int 0x0001 "AT Translated Set 2 keyboard"
>  Device File: /dev/input/event1
>  Device Number: char 13:65
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>55: PS/2 00.0: 10500 PS/2 Mouse
>  [Created at input.157]
>  UDI: /org/freedesktop/Hal/devices/computer_i8042_Aux_Port_logicaldev_input
>  Unique ID: AH6Q.hI1e_vHaTSC
>  Hardware Class: mouse
>  Model: "ImPS/2 Logitech Wheel Mouse"
>  Vendor: int 0x0210 
>  Device: int 0x0013 "ImPS/2 Logitech Wheel Mouse"
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2
>  Device Number: char 13:63 (char 13:32)
>  Driver Info #0:
>    Buttons: 3
>    Wheels: 1
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>56: None 00.0: 10103 CPU
>  [Created at cpu.290]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: Intel
>  Vendor: "GenuineIntel"
>  Model: 6.11.1 "Intel(R) Pentium(R) III Mobile CPU      1000MHz"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse
>  Clock: 996 MHz
>  Cache: 512 kb
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>57: None 00.0: 10000 Monitor
>  [Created at fb.70]
>  Unique ID: rdCR.EY_qmtb9YY0
>  Hardware Class: monitor
>  Model: "Generic Monitor"
>  Vendor: "Generic"
>  Device: "Monitor"
>  Resolution: 1024x768@76Hz
>  Driver Info #0:
>    Max. Resolution: 1024x768
>    Vert. Sync Range: 50-90 Hz
>    Hor. Sync Range: 31-61 kHz
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>58: None 00.0: 10701 Ethernet
>  [Created at net.111]
>  UDI: /org/freedesktop/Hal/devices/net_00_c0_9f_05_d0_38
>  Unique ID: usDW.ndpeucax6V1
>  Parent ID: rBUF.R9cTPt3QL_C
>  SysFS ID: /class/net/eth0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:02:08.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "e100"
>  Device File: eth0
>  HW Address: 00:c0:9f:05:d0:38
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #27 (Ethernet controller)
>
>59: None 00.0: 10700 Loopback
>  [Created at net.111]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>60: None 00.0: 10781 Network Interface
>  [Created at net.111]
>  Unique ID: wl2P.nfEXJulusj6
>  SysFS ID: /class/net/sit0
>  Hardware Class: network interface
>  Model: "Network Interface"
>  Device File: sit0
>  Config Status: cfg=new, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 116436: 49753 | 49754 | 49831 | 49832 | 49833