Attachment 49855 Details for Bug 113778

Dmesg of kernel-default-2.6.13-20050913_yenta_subordinate

dmesg_suse (text/plain), 16.87 KB, created by Frank Fischer on 2005-09-14 01:34:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Frank Fischer

Created: 2005-09-14 01:34:04 UTC

Size: 16.87 KB

patch

obsolete

>Linux version 2.6.13-20050913_yenta_subordinate-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 10:36:21 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fe80000 (usable)
> BIOS-e820: 000000001fe80000 - 000000001fe89000 (ACPI data)
> BIOS-e820: 000000001fe89000 - 000000001ff00000 (ACPI NVS)
> BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>510MB LOWMEM available.
>On node 0 totalpages: 130688
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126592 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda2 vga=0x314 selinux=0    acpi=off resume=/dev/sda7  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1596.313 MHz processor.
>Using tsc for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 512592k/522752k available (2028k kernel code, 9596k reserved, 700k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3197.92 BogoMIPS (lpj=6395849)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1723k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfd6ce, last bus=8
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: c8100000-c81fffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 7, cardbus bridge: 0000:06:09.0
>  IO window: 00003000-00003fff
>  IO window: 00004000-00004fff
>  PREFETCH window: 20000000-21ffffff
>  MEM window: 22000000-23ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-4fff
>  MEM window: c8200000-c82fffff
>  PREFETCH window: 20000000-21ffffff
>PCI: No IRQ known for interrupt pin A of device 0000:00:01.0. Please try using pci=biosirq.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Please try using pci=biosirq.
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: No IRQ known for interrupt pin B of device 0000:00:1c.1. Please try using pci=biosirq.
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: No IRQ known for interrupt pin C of device 0000:00:1c.2. Please try using pci=biosirq.
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1126667828.612:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>PCI: No IRQ known for interrupt pin A of device 0000:00:01.0. Please try using pci=biosirq.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>pcie_portdrv_probe->Dev[2591:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Please try using pci=biosirq.
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>pcie_portdrv_probe->Dev[2660:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>PCI: No IRQ known for interrupt pin B of device 0000:00:1c.1. Please try using pci=biosirq.
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>pcie_portdrv_probe->Dev[2662:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>PCI: No IRQ known for interrupt pin C of device 0000:00:1c.2. Please try using pci=biosirq.
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>pcie_portdrv_probe->Dev[2664:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 3750k, total 16384k
>vesafb: mode is 800x600x16, linelength=1600, pages=16
>vesafb: protected mode interface info at c000:ad8c
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 51530 bytes,<6>...found (800x600, 8809 bytes, v3).
>Console: switching to colour frame buffer device 99x34
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>Freeing unused kernel memory: 204k freed
>SCSI subsystem initialized
>libata version 1.12 loaded.
>ahci version 1.01
>ahci: probe of 0000:00:1f.2 failed with error -12
>input: AT Translated Set 2 keyboard on isa0060/serio0
>ata_piix version 1.04
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18A0 irq 14
>ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3d48 87:4023 88:203f
>ata1: dev 0 ATA, max UDMA/100, 156301488 sectors: lba48
>ata1(0): applying bridge limits
>ata1: dev 0 configured for UDMA/100
>scsi0 : ata_piix
>  Vendor: ATA       Model: IC25N080ATMR04-0  Rev: MO4O
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18A8 irq 15
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>udev[831]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[838]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[839]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[840]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[841]: run_program: exec of program '/sbin/udev.mount.sh' failed
>ata2: dev 0 cfg 49:0f00 82:421c 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
>ata2: dev 0 ATAPI, max UDMA/33
>ata2(0): applying bridge limits
>ata2: dev 0 configured for UDMA/33
>scsi1 : ata_piix
>  Vendor: HL-DT-ST  Model: DVDRAM GMA-4080N  Rev: 0H35
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 5
>udev[850]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[869]: run_program: exec of program '/sbin/udev.mount.sh' failed
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>scsi_id[893]: 1:0:0:0: Invalid page 0x83
>udev[899]: run_program: exec of program '/etc/hotplug.d/input_device/50-input_device.hotplug' failed
>udev[900]: run_program: exec of program '/etc/hotplug.d/input_device/50-input_device.hotplug' failed
>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>ReiserFS: sda2: using ordered data mode
>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda2: checking transaction log (sda2)
>ReiserFS: sda2: Using r5 hash to sort names
>ReiserFS: sda2: Removing [52678 52716 0x0 SD]..done
>ReiserFS: sda2: Removing [52678 52680 0x0 SD]..done
>ReiserFS: sda2: Removing [105 52678 0x0 SD]..done
>ReiserFS: sda2: There were 3 uncompleted unlinks/truncates. Completed
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 1052216k swap on /dev/sda7.  Priority:-1 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (4084 buckets, 32672 max) - 248 bytes per conntrack
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>    ACPI-0768: *** Warning: Thread 9A0 could not acquire Mutex [<NULL>] AE_BAD_PARAMETER
>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001860
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hw_random: RNG not detected
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc8004000
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'NULL'
>tg3.c:v3.37 (August 25, 2005)
>eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:83:1b:62
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] 
>eth0: dma_rwctrl[763f0000]
>ieee80211: module not supported by Novell, setting U taint flag.
>ieee80211: 802.11 data/management/control stack, 1.0.3
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
>tpm: module not supported by Novell, setting U taint flag.
>tpm_nsc: module not supported by Novell, setting U taint flag.
>tpm_infineon: module not supported by Novell, setting U taint flag.
>tpm_inf 0000:00:1f.0: LPC-bus found at 0x2641
>tpm_inf: probe of 0000:00:1f.0 failed with error -5
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Yenta: CardBus bridge found at 0000:06:09.0 [1025:0070]
>Yenta O2: res at 0x94/0xD4: ea/00
>Yenta O2: enabling read prefetch/write burst
>ipw2200: module not supported by Novell, setting U taint flag.
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
>ieee1394: Initialized config rom entry `ip1394'
>Yenta: ISA IRQ mask 0x00b8, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x4fff
>cs: IO port probe 0x3000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff
>pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
>Yenta: no bus associated with 0000:06:09.1!
>Yenta: no bus associated with 0000:06:09.3!
>ipw2200: ipw-2.3-boot.fw load failed: Reason -2
>ipw2200: Unable to load firmware: 0xFFFFFFFE
>ipw2200: failed to register network device
>ipw2200: probe of 0000:06:03.0 failed with error -5
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[c8215000-c82157ff]  Max Packet=[2048]
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f0000423950]
>Bluetooth: Core ver 2.7
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.8
>usbcore: registered new driver hci_usb
>cs: IO port probe 0x3d4-0x4ff: excluding 0x3f4-0x3fb 0x4cc-0x4d3
>cs: IO port probe 0x3c0-0x3d2: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x800-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>powernow: This module only works with AMD K7 CPUs
>usbcore: registered new driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
>usbcore: registered new driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
>ReiserFS: sda8: found reiserfs format "3.6" with standard journal
>ReiserFS: sda8: using ordered data mode
>ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda8: checking transaction log (sda8)
>ReiserFS: sda8: Using r5 hash to sort names

Actions: View

Attachments on bug 113778: 48196 | 48735 | 48736 | 48784 | 48786 | 48788 | 48789 | 48790 | 49559 | 49673 | 49715 | 49716 | 49717 | 49855 | 49920