Bugzilla – Attachment 49986 Details for
Bug 116739
No data written to /boot/efi?
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
dcon's hwinfo
hwinfo.txt (text/plain), 90.57 KB, created by
Dennis Conrad
on 2005-09-15 05:33:56 UTC
(
hide
)
Description:
dcon's hwinfo
Filename:
MIME Type:
Creator:
Dennis Conrad
Created:
2005-09-15 05:33:56 UTC
Size:
90.57 KB
patch
obsolete
>============ start debug info ============ >libhd version 11.22 (ia64) >kernel version is 2.6 >----- /proc/cmdline ----- > BOOT_IMAGE=net0:ia64/linux ramdisk_size=131072 rescue=1 install=nfs://10.10.0.4/machcd/CDs/SUSE-10.0-DVD-ia64-RC2/CD1 >----- /proc/cmdline end ----- >debug = 0xff7ffff7 >probe = 0x00138fc4a8107ffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int -braille -braille.alva -braille.fhp -braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod -braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc) >shm: attached segment 1605632 at 0x2000000000b00000 >>> hal.1: read hal data > hal: connected to: :1.1 >----- hal device list ----- > 0: udi = '/org/freedesktop/Hal/devices/storage_model_HL_DT_ST_DVD_RW_GCA_4040N' > info.callouts.add = { 'hald-add-selinux-mount-option' } > info.addons = { 'hald-addon-storage' } > storage.policy.desired_mount_point = 'cdrecorder' > storage.policy.mount_filesystem = 'auto' > storage.policy.should_mount = true > block.storage_device = '/org/freedesktop/Hal/devices/storage_model_HL_DT_ST_DVD_RW_GCA_4040N' > info.udi = '/org/freedesktop/Hal/devices/storage_model_HL_DT_ST_DVD_RW_GCA_4040N' > storage.cdrom.write_speed = 2822 (0xb06) > storage.cdrom.read_speed = 4234 (0x108a) > storage.cdrom.support_media_changed = true > storage.cdrom.dvdplusrdl = false > storage.cdrom.dvdplusrw = true > storage.cdrom.dvdplusr = true > storage.cdrom.dvdram = false > storage.cdrom.dvdrw = false > storage.cdrom.dvdr = false > storage.cdrom.dvd = true > storage.cdrom.cdrw = true > storage.cdrom.cdr = true > storage.firmware_version = '1.20' > storage.requires_eject = true > storage.hotpluggable = false > info.capabilities = { 'storage', 'block', 'storage.cdrom' } > info.category = 'storage' > info.product = 'HL-DT-ST DVD+RW GCA-4040N' > storage.removable = true > storage.physical_device = '/org/freedesktop/Hal/devices/pci_1095_649_ide_0_0' > storage.drive_type = 'cdrom' > storage.vendor = '' > storage.model = 'HL-DT-ST DVD+RW GCA-4040N' > storage.automount_enabled_hint = true > storage.media_check_enabled = true > storage.no_partitions_hint = true > storage.bus = 'ide' > block.is_volume = false > block.minor = 0 (0x0) > block.major = 3 (0x3) > block.device = '/dev/hda' > linux.hotplug_type = 3 (0x3) > info.parent = '/org/freedesktop/Hal/devices/pci_1095_649_ide_0_0' > linux.sysfs_path_device = '/sys/block/hda' > linux.sysfs_path = '/sys/block/hda' > > 1: udi = '/org/freedesktop/Hal/devices/volume_part1_size_213827584' > volume.policy.desired_mount_point = 'scsidisk' > volume.policy.mount_filesystem = 'vfat' > volume.policy.should_mount = false > info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_213827584' > volume.partition.msdos_part_table_type = 238 (0xee) > info.product = 'Volume (vfat)' > volume.size = 213827584ull (0xcbec000ull) > volume.num_blocks = 417632 (0x65f60) > volume.block_size = 512 (0x200) > volume.partition.number = 1 (0x1) > info.capabilities = { 'volume', 'block' } > info.category = 'volume' > volume.is_partition = true > volume.is_disc = false > volume.is_mounted = false > volume.mount_point = '' > volume.label = '' > volume.uuid = '' > volume.fsversion = 'FAT32' > volume.fsusage = 'filesystem' > volume.fstype = 'vfat' > block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C' > block.is_volume = true > block.minor = 1 (0x1) > block.major = 8 (0x8) > block.device = '/dev/sda1' > linux.hotplug_type = 3 (0x3) > info.parent = '/org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C' > linux.sysfs_path_device = '/sys/block/sda/sda1' > linux.sysfs_path = '/sys/block/sda/sda1' > > 2: udi = '/org/freedesktop/Hal/devices/volume_part2_size_2154888704' > info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_2154888704' > info.product = 'Volume (swap)' > volume.size = 2154888704ull (0x8070fe00ull) > volume.num_blocks = 4208767 (0x40387f) > volume.block_size = 512 (0x200) > volume.partition.number = 2 (0x2) > info.capabilities = { 'volume', 'block' } > info.category = 'volume' > volume.is_partition = true > volume.is_disc = false > volume.is_mounted = false > volume.mount_point = '' > volume.label = '' > volume.uuid = '' > volume.fsversion = '2' > volume.fsusage = 'other' > volume.fstype = 'swap' > block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C' > block.is_volume = true > block.minor = 2 (0x2) > block.major = 8 (0x8) > block.device = '/dev/sda2' > linux.hotplug_type = 3 (0x3) > info.parent = '/org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C' > linux.sysfs_path_device = '/sys/block/sda/sda2' > linux.sysfs_path = '/sys/block/sda/sda2' > > 3: udi = '/org/freedesktop/Hal/devices/volume_uuid_cc0603a8_d983_4b15_8817_54962567c2a1' > volume.policy.desired_mount_point = 'scsidisk' > volume.policy.mount_filesystem = 'reiserfs' > volume.policy.should_mount = true > info.udi = '/org/freedesktop/Hal/devices/volume_uuid_cc0603a8_d983_4b15_8817_54962567c2a1' > info.product = 'Volume (reiserfs)' > volume.size = 8594882560ull (0x2004b8000ull) > volume.num_blocks = 16786880 (0x10025c0) > volume.block_size = 512 (0x200) > volume.partition.number = 3 (0x3) > info.capabilities = { 'volume', 'block' } > info.category = 'volume' > volume.is_partition = true > volume.is_disc = false > volume.is_mounted = true > volume.mount_point = '/mnt' > volume.label = '' > volume.uuid = 'cc0603a8-d983-4b15-8817-54962567c2a1' > volume.fsversion = '3.6' > volume.fsusage = 'filesystem' > volume.fstype = 'reiserfs' > block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C' > block.is_volume = true > block.minor = 3 (0x3) > block.major = 8 (0x8) > block.device = '/dev/sda3' > linux.hotplug_type = 3 (0x3) > info.parent = '/org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C' > linux.sysfs_path_device = '/sys/block/sda/sda3' > linux.sysfs_path = '/sys/block/sda/sda3' > > 4: udi = '/org/freedesktop/Hal/devices/volume_uuid_87a57e02_6212_4fed_9640_7fc79d4c82f3' > volume.policy.desired_mount_point = 'scsidisk' > volume.policy.mount_filesystem = 'reiserfs' > volume.policy.should_mount = true > info.udi = '/org/freedesktop/Hal/devices/volume_uuid_87a57e02_6212_4fed_9640_7fc79d4c82f3' > info.product = 'Volume (reiserfs)' > volume.size = 5370774016ull (0x1401f8200ull) > volume.num_blocks = 10489793 (0xa00fc1) > volume.block_size = 512 (0x200) > volume.partition.number = 4 (0x4) > info.capabilities = { 'volume', 'block' } > info.category = 'volume' > volume.is_partition = true > volume.is_disc = false > volume.is_mounted = false > volume.mount_point = '' > volume.label = '' > volume.uuid = '87a57e02-6212-4fed-9640-7fc79d4c82f3' > volume.fsversion = '3.6' > volume.fsusage = 'filesystem' > volume.fstype = 'reiserfs' > block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C' > block.is_volume = true > block.minor = 4 (0x4) > block.major = 8 (0x8) > block.device = '/dev/sda4' > linux.hotplug_type = 3 (0x3) > info.parent = '/org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C' > linux.sysfs_path_device = '/sys/block/sda/sda4' > linux.sysfs_path = '/sys/block/sda/sda4' > > 5: udi = '/org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C' > storage.policy.should_mount = false > block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C' > info.udi = '/org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C' > storage.serial = '3KP032TD00007530W71C' > storage.requires_eject = false > storage.hotpluggable = false > info.capabilities = { 'storage', 'block' } > info.category = 'storage' > info.product = 'ST373454LC' > info.vendor = 'HP 73.4G' > storage.removable = false > storage.physical_device = '/org/freedesktop/Hal/devices/pci_1000_30_0_scsi_host_scsi_device_lun0' > storage.lun = 0 (0x0) > storage.drive_type = 'disk' > storage.vendor = 'HP 73.4G' > storage.model = 'ST373454LC' > storage.automount_enabled_hint = true > storage.media_check_enabled = false > storage.no_partitions_hint = false > storage.bus = 'scsi' > block.is_volume = false > block.minor = 0 (0x0) > block.major = 8 (0x8) > block.device = '/dev/sda' > linux.hotplug_type = 3 (0x3) > info.parent = '/org/freedesktop/Hal/devices/pci_1000_30_0_scsi_host_scsi_device_lun0' > linux.sysfs_path_device = '/sys/block/sda' > linux.sysfs_path = '/sys/block/sda' > > 6: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_0_if0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_0_if0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > info.product = 'USB Hub Interface' > usb.interface.protocol = 0 (0x0) > usb.interface.subclass = 0 (0x0) > usb.interface.class = 9 (0x9) > usb.interface.number = 0 (0x0) > info.linux.driver = 'hub' > usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/usb2/2-0:1.0' > usb.configuration_value = 1 (0x1) > usb.num_configurations = 1 (0x1) > usb.num_interfaces = 1 (0x1) > usb.device_class = 9 (0x9) > usb.device_subclass = 0 (0x0) > usb.device_protocol = 0 (0x0) > usb.vendor_id = 0 (0x0) > usb.product_id = 0 (0x0) > usb.vendor = 'Linux 2.6.13-11-default ohci_hcd' > usb.product = 'USB Hub Interface' > usb.device_revision_bcd = 518 (0x206) > usb.max_power = 0 (0x0) > usb.num_ports = 3 (0x3) > usb.linux.device_number = 1 (0x1) > usb.serial = '0000:00:01.0' > usb.speed_bcd = 4608 (0x1200) > usb.version_bcd = 272 (0x110) > usb.is_self_powered = true > usb.can_wake_up = false > usb.bus_number = 2 (0x2) > info.bus = 'usb' > info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_0' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/usb2/2-0:1.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/usb2/2-0:1.0' > > 7: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > usb_device.bus_number = 2 (0x2) > usb_device.can_wake_up = false > usb_device.is_self_powered = true > usb_device.version_bcd = 272 (0x110) > usb_device.speed_bcd = 4608 (0x1200) > usb_device.serial = '0000:00:01.0' > usb_device.linux.device_number = 1 (0x1) > usb_device.num_ports = 3 (0x3) > usb_device.max_power = 0 (0x0) > usb_device.device_revision_bcd = 518 (0x206) > info.product = 'OHCI Host Controller' > usb_device.product = 'OHCI Host Controller' > info.vendor = 'Linux 2.6.13-11-default ohci_hcd' > usb_device.vendor = 'Linux 2.6.13-11-default ohci_hcd' > usb_device.product_id = 0 (0x0) > usb_device.vendor_id = 0 (0x0) > usb_device.device_protocol = 0 (0x0) > usb_device.device_subclass = 0 (0x0) > usb_device.device_class = 9 (0x9) > usb_device.num_interfaces = 1 (0x1) > usb_device.num_configurations = 1 (0x1) > usb_device.configuration_value = 1 (0x1) > usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/usb2' > info.linux.driver = 'usb' > info.bus = 'usb_device' > info.parent = '/org/freedesktop/Hal/devices/pci_1033_35_0' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/usb2' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/usb2' > > 8: udi = '/org/freedesktop/Hal/devices/pci_1033_35_0' > info.udi = '/org/freedesktop/Hal/devices/pci_1033_35_0' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x0035)' > pci.subsys_vendor = 'NEC Corporation' > info.product = 'USB' > pci.product = 'USB' > info.vendor = 'NEC Corporation' > pci.vendor = 'NEC Corporation' > pci.device_protocol = 16 (0x10) > pci.device_subclass = 3 (0x3) > pci.device_class = 12 (0xc) > pci.subsys_vendor_id = 4147 (0x1033) > pci.subsys_product_id = 53 (0x35) > pci.vendor_id = 4147 (0x1033) > pci.product_id = 53 (0x35) > info.linux.driver = 'ohci_hcd' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' > > 9: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_1_if0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_1_if0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > info.product = 'USB Hub Interface' > usb.interface.protocol = 0 (0x0) > usb.interface.subclass = 0 (0x0) > usb.interface.class = 9 (0x9) > usb.interface.number = 0 (0x0) > info.linux.driver = 'hub' > usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1/usb3/3-0:1.0' > usb.configuration_value = 1 (0x1) > usb.num_configurations = 1 (0x1) > usb.num_interfaces = 1 (0x1) > usb.device_class = 9 (0x9) > usb.device_subclass = 0 (0x0) > usb.device_protocol = 0 (0x0) > usb.vendor_id = 0 (0x0) > usb.product_id = 0 (0x0) > usb.vendor = 'Linux 2.6.13-11-default ohci_hcd' > usb.product = 'USB Hub Interface' > usb.device_revision_bcd = 518 (0x206) > usb.max_power = 0 (0x0) > usb.num_ports = 2 (0x2) > usb.linux.device_number = 1 (0x1) > usb.serial = '0000:00:01.1' > usb.speed_bcd = 4608 (0x1200) > usb.version_bcd = 272 (0x110) > usb.is_self_powered = true > usb.can_wake_up = false > usb.bus_number = 3 (0x3) > info.bus = 'usb' > info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_1' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.1/usb3/3-0:1.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1/usb3/3-0:1.0' > > 10: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_1' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_1' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > usb_device.bus_number = 3 (0x3) > usb_device.can_wake_up = false > usb_device.is_self_powered = true > usb_device.version_bcd = 272 (0x110) > usb_device.speed_bcd = 4608 (0x1200) > usb_device.serial = '0000:00:01.1' > usb_device.linux.device_number = 1 (0x1) > usb_device.num_ports = 2 (0x2) > usb_device.max_power = 0 (0x0) > usb_device.device_revision_bcd = 518 (0x206) > info.product = 'OHCI Host Controller' > usb_device.product = 'OHCI Host Controller' > info.vendor = 'Linux 2.6.13-11-default ohci_hcd' > usb_device.vendor = 'Linux 2.6.13-11-default ohci_hcd' > usb_device.product_id = 0 (0x0) > usb_device.vendor_id = 0 (0x0) > usb_device.device_protocol = 0 (0x0) > usb_device.device_subclass = 0 (0x0) > usb_device.device_class = 9 (0x9) > usb_device.num_interfaces = 1 (0x1) > usb_device.num_configurations = 1 (0x1) > usb_device.configuration_value = 1 (0x1) > usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1/usb3' > info.linux.driver = 'usb' > info.bus = 'usb_device' > info.parent = '/org/freedesktop/Hal/devices/pci_1033_35' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.1/usb3' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1/usb3' > > 11: udi = '/org/freedesktop/Hal/devices/pci_1033_35' > info.udi = '/org/freedesktop/Hal/devices/pci_1033_35' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x0035)' > pci.subsys_vendor = 'NEC Corporation' > info.product = 'USB' > pci.product = 'USB' > info.vendor = 'NEC Corporation' > pci.vendor = 'NEC Corporation' > pci.device_protocol = 16 (0x10) > pci.device_subclass = 3 (0x3) > pci.device_class = 12 (0xc) > pci.subsys_vendor_id = 4147 (0x1033) > pci.subsys_product_id = 53 (0x35) > pci.vendor_id = 4147 (0x1033) > pci.product_id = 53 (0x35) > info.linux.driver = 'ohci_hcd' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.1' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1' > > 12: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_2_if0' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_2_if0' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > info.product = 'USB Hub Interface' > usb.interface.protocol = 0 (0x0) > usb.interface.subclass = 0 (0x0) > usb.interface.class = 9 (0x9) > usb.interface.number = 0 (0x0) > info.linux.driver = 'hub' > usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.2/usb1/1-0:1.0' > usb.configuration_value = 1 (0x1) > usb.num_configurations = 1 (0x1) > usb.num_interfaces = 1 (0x1) > usb.device_class = 9 (0x9) > usb.device_subclass = 0 (0x0) > usb.device_protocol = 1 (0x1) > usb.vendor_id = 0 (0x0) > usb.product_id = 0 (0x0) > usb.vendor = 'Linux 2.6.13-11-default ehci_hcd' > usb.product = 'USB Hub Interface' > usb.device_revision_bcd = 518 (0x206) > usb.max_power = 0 (0x0) > usb.num_ports = 5 (0x5) > usb.linux.device_number = 1 (0x1) > usb.serial = '0000:00:01.2' > usb.speed_bcd = 294912 (0x48000) > usb.version_bcd = 512 (0x200) > usb.is_self_powered = true > usb.can_wake_up = true > usb.bus_number = 1 (0x1) > info.bus = 'usb' > info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_2' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.2/usb1/1-0:1.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.2/usb1/1-0:1.0' > > 13: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_2' > info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_2' > linux.subsystem = 'usb' > linux.hotplug_type = 1 (0x1) > usb_device.bus_number = 1 (0x1) > usb_device.can_wake_up = true > usb_device.is_self_powered = true > usb_device.version_bcd = 512 (0x200) > usb_device.speed_bcd = 294912 (0x48000) > usb_device.serial = '0000:00:01.2' > usb_device.linux.device_number = 1 (0x1) > usb_device.num_ports = 5 (0x5) > usb_device.max_power = 0 (0x0) > usb_device.device_revision_bcd = 518 (0x206) > info.product = 'EHCI Host Controller' > usb_device.product = 'EHCI Host Controller' > info.vendor = 'Linux 2.6.13-11-default ehci_hcd' > usb_device.vendor = 'Linux 2.6.13-11-default ehci_hcd' > usb_device.product_id = 0 (0x0) > usb_device.vendor_id = 0 (0x0) > usb_device.device_protocol = 1 (0x1) > usb_device.device_subclass = 0 (0x0) > usb_device.device_class = 9 (0x9) > usb_device.num_interfaces = 1 (0x1) > usb_device.num_configurations = 1 (0x1) > usb_device.configuration_value = 1 (0x1) > usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.2/usb1' > info.linux.driver = 'usb' > info.bus = 'usb_device' > info.parent = '/org/freedesktop/Hal/devices/pci_1033_e0' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.2/usb1' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.2/usb1' > > 14: udi = '/org/freedesktop/Hal/devices/pci_1033_e0' > info.udi = '/org/freedesktop/Hal/devices/pci_1033_e0' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x00e0)' > pci.subsys_vendor = 'NEC Corporation' > info.product = 'USB 2.0' > pci.product = 'USB 2.0' > info.vendor = 'NEC Corporation' > pci.vendor = 'NEC Corporation' > pci.device_protocol = 32 (0x20) > pci.device_subclass = 3 (0x3) > pci.device_class = 12 (0xc) > pci.subsys_vendor_id = 4147 (0x1033) > pci.subsys_product_id = 224 (0xe0) > pci.vendor_id = 4147 (0x1033) > pci.product_id = 224 (0xe0) > info.linux.driver = 'ehci_hcd' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.2' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.2' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.2' > > 15: udi = '/org/freedesktop/Hal/devices/pci_1095_649_ide_0_0' > info.udi = '/org/freedesktop/Hal/devices/pci_1095_649_ide_0_0' > linux.subsystem = 'ide' > linux.hotplug_type = 1 (0x1) > info.product = 'IDE device (master)' > ide.channel = 0 (0x0) > ide.host = 0 (0x0) > info.linux.driver = 'ide-cdrom' > info.parent = '/org/freedesktop/Hal/devices/pci_1095_649' > info.bus = 'ide' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0/ide0/0.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/ide0/0.0' > > 16: udi = '/org/freedesktop/Hal/devices/pci_1095_649' > info.udi = '/org/freedesktop/Hal/devices/pci_1095_649' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x0649)' > pci.subsys_vendor = 'Silicon Image, Inc.' > info.product = 'SiI 0649 Ultra ATA/100 PCI to ATA Host Controller' > pci.product = 'SiI 0649 Ultra ATA/100 PCI to ATA Host Controller' > info.vendor = 'Silicon Image, Inc.' > pci.vendor = 'Silicon Image, Inc.' > pci.device_protocol = 143 (0x8f) > pci.device_subclass = 1 (0x1) > pci.device_class = 1 (0x1) > pci.subsys_vendor_id = 4245 (0x1095) > pci.subsys_product_id = 1609 (0x649) > pci.vendor_id = 4245 (0x1095) > pci.product_id = 1609 (0x649) > info.linux.driver = 'CMD64x_IDE' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' > > 17: udi = '/org/freedesktop/Hal/devices/net_00_30_6e_4c_25_a4' > info.udi = '/org/freedesktop/Hal/devices/net_00_30_6e_4c_25_a4' > linux.subsystem = 'net' > linux.hotplug_type = 2 (0x2) > net.80203.mac_address = 208008914340ull (0x306e4c25a4ull) > info.product = 'Networking Interface' > net.interface_up = false > net.arp_proto_hw_id = 1 (0x1) > net.linux.ifindex = 2 (0x2) > net.address = '00:30:6e:4c:25:a4' > net.interface = 'eth0' > net.physical_device = '/org/freedesktop/Hal/devices/pci_8086_1229' > info.capabilities = { 'net', 'net.80203' } > info.category = 'net.80203' > info.parent = '/org/freedesktop/Hal/devices/pci_8086_1229' > linux.sysfs_path = '/sys/class/net/eth0' > > 18: udi = '/org/freedesktop/Hal/devices/pci_8086_1229' > info.udi = '/org/freedesktop/Hal/devices/pci_8086_1229' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x1274)' > pci.subsys_vendor = 'Hewlett-Packard Company' > info.product = '82557/8/9 [Ethernet Pro 100]' > pci.product = '82557/8/9 [Ethernet Pro 100]' > info.vendor = 'Intel Corporation' > pci.vendor = 'Intel Corporation' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 2 (0x2) > pci.subsys_vendor_id = 4156 (0x103c) > pci.subsys_product_id = 4724 (0x1274) > pci.vendor_id = 32902 (0x8086) > pci.product_id = 4649 (0x1229) > info.linux.driver = 'e100' > pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0' > linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0' > > 19: udi = '/org/freedesktop/Hal/devices/pci_1000_30_0_scsi_host_scsi_device_lun0' > info.udi = '/org/freedesktop/Hal/devices/pci_1000_30_0_scsi_host_scsi_device_lun0' > linux.subsystem = 'scsi' > linux.hotplug_type = 1 (0x1) > info.product = 'SCSI Device' > info.linux.driver = 'sd' > scsi.lun = 0 (0x0) > scsi.target = 0 (0x0) > scsi.bus = 0 (0x0) > scsi.host = 0 (0x0) > info.parent = '/org/freedesktop/Hal/devices/pci_1000_30_0_scsi_host' > info.bus = 'scsi' > linux.sysfs_path_device = '/sys/devices/pci0000:20/0000:20:01.0/host0/target0:0:0/0:0:0:0' > linux.sysfs_path = '/sys/devices/pci0000:20/0000:20:01.0/host0/target0:0:0/0:0:0:0' > > 20: udi = '/org/freedesktop/Hal/devices/pci_1000_30_0_scsi_host' > info.udi = '/org/freedesktop/Hal/devices/pci_1000_30_0_scsi_host' > linux.subsystem = 'scsi_host' > linux.hotplug_type = 2 (0x2) > scsi_host.host = 0 (0x0) > info.product = 'SCSI Host Adapter' > info.capabilities = { 'scsi_host' } > info.category = 'scsi_host' > info.parent = '/org/freedesktop/Hal/devices/pci_1000_30_0' > linux.sysfs_path_device = '/sys/devices/pci0000:20/0000:20:01.0/host0' > linux.sysfs_path = '/sys/class/scsi_host/host0' > > 21: udi = '/org/freedesktop/Hal/devices/pci_1000_30_0' > info.udi = '/org/freedesktop/Hal/devices/pci_1000_30_0' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x1000)' > pci.subsys_vendor = 'LSI Logic / Symbios Logic' > info.product = '53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI' > pci.product = '53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI' > info.vendor = 'LSI Logic / Symbios Logic' > pci.vendor = 'LSI Logic / Symbios Logic' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 1 (0x1) > pci.subsys_vendor_id = 4096 (0x1000) > pci.subsys_product_id = 4096 (0x1000) > pci.vendor_id = 4096 (0x1000) > pci.product_id = 48 (0x30) > info.linux.driver = 'mptspi' > pci.linux.sysfs_path = '/sys/devices/pci0000:20/0000:20:01.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:20/0000:20:01.0' > linux.sysfs_path = '/sys/devices/pci0000:20/0000:20:01.0' > > 22: udi = '/org/freedesktop/Hal/devices/pci_1000_30_scsi_host' > info.udi = '/org/freedesktop/Hal/devices/pci_1000_30_scsi_host' > linux.subsystem = 'scsi_host' > linux.hotplug_type = 2 (0x2) > scsi_host.host = 1 (0x1) > info.product = 'SCSI Host Adapter' > info.capabilities = { 'scsi_host' } > info.category = 'scsi_host' > info.parent = '/org/freedesktop/Hal/devices/pci_1000_30' > linux.sysfs_path_device = '/sys/devices/pci0000:20/0000:20:01.1/host1' > linux.sysfs_path = '/sys/class/scsi_host/host1' > > 23: udi = '/org/freedesktop/Hal/devices/pci_1000_30' > info.udi = '/org/freedesktop/Hal/devices/pci_1000_30' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Unknown (0x1000)' > pci.subsys_vendor = 'LSI Logic / Symbios Logic' > info.product = '53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI' > pci.product = '53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI' > info.vendor = 'LSI Logic / Symbios Logic' > pci.vendor = 'LSI Logic / Symbios Logic' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 1 (0x1) > pci.subsys_vendor_id = 4096 (0x1000) > pci.subsys_product_id = 4096 (0x1000) > pci.vendor_id = 4096 (0x1000) > pci.product_id = 48 (0x30) > info.linux.driver = 'mptspi' > pci.linux.sysfs_path = '/sys/devices/pci0000:20/0000:20:01.1' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:20/0000:20:01.1' > linux.sysfs_path = '/sys/devices/pci0000:20/0000:20:01.1' > > 24: udi = '/org/freedesktop/Hal/devices/net_00_30_6e_4c_25_a5' > info.udi = '/org/freedesktop/Hal/devices/net_00_30_6e_4c_25_a5' > linux.subsystem = 'net' > linux.hotplug_type = 2 (0x2) > net.80203.mac_address = 208008914341ull (0x306e4c25a5ull) > info.product = 'Networking Interface' > net.interface_up = false > net.arp_proto_hw_id = 1 (0x1) > net.linux.ifindex = 3 (0x3) > net.address = '00:30:6e:4c:25:a5' > net.interface = 'eth1' > net.physical_device = '/org/freedesktop/Hal/devices/pci_14e4_1645' > info.capabilities = { 'net', 'net.80203' } > info.category = 'net.80203' > info.parent = '/org/freedesktop/Hal/devices/pci_14e4_1645' > linux.sysfs_path = '/sys/class/net/eth1' > > 25: udi = '/org/freedesktop/Hal/devices/pci_14e4_1645' > info.udi = '/org/freedesktop/Hal/devices/pci_14e4_1645' > linux.subsystem = 'pci' > linux.hotplug_type = 1 (0x1) > pci.subsys_product = 'Core Lan 1000Base-T' > pci.subsys_vendor = 'Hewlett-Packard Company' > info.product = 'NetXtreme BCM5701 Gigabit Ethernet' > pci.product = 'NetXtreme BCM5701 Gigabit Ethernet' > info.vendor = 'Broadcom Corporation' > pci.vendor = 'Broadcom Corporation' > pci.device_protocol = 0 (0x0) > pci.device_subclass = 0 (0x0) > pci.device_class = 2 (0x2) > pci.subsys_vendor_id = 4156 (0x103c) > pci.subsys_product_id = 4772 (0x12a4) > pci.vendor_id = 5348 (0x14e4) > pci.product_id = 5701 (0x1645) > info.linux.driver = 'tg3' > pci.linux.sysfs_path = '/sys/devices/pci0000:20/0000:20:02.0' > info.parent = '/org/freedesktop/Hal/devices/computer' > info.bus = 'pci' > linux.sysfs_path_device = '/sys/devices/pci0000:20/0000:20:02.0' > linux.sysfs_path = '/sys/devices/pci0000:20/0000:20:02.0' > > 26: udi = '/org/freedesktop/Hal/devices/computer' > storage.policy.default.mount_option.exec = true > storage.policy.default.mount_option.pamconsole = true > storage.policy.default.mount_option.noauto = true > storage.policy.default.managed_keyword.secondary = 'kudzu' > storage.policy.default.managed_keyword.primary = 'managed' > storage.policy.default.use_managed_keyword = true > storage.policy.default.mount_root = '/media' > org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-set-power-save' } > org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', 'b' } > org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'SetPowerSave' } > info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' } > info.addons = { 'hald-addon-acpi' } > power_management.acpi.linux.version = '20050408' > power_management.type = 'acpi' > power_management.is_enabled = true > system.formfactor = 'unknown' > system.kernel.machine = 'ia64' > system.kernel.version = '2.6.13-11-default' > system.kernel.name = 'Linux' > info.udi = '/org/freedesktop/Hal/devices/computer' > info.product = 'Computer' > linux.sysfs_path_device = '(none)' > info.bus = 'unknown' >----- hal device list end ----- >>> floppy.1: get nvram >>> floppy.2: klog info >>> bios.1: cmdline >>> bios.1.1: apm >>> bios.2: ram >/dev/mem[0x400, 256]: mmap(, 16384,,,, 0x0) ok >/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok > bios: 192 disks > bios: 57276k low mem >/dev/mem[0x18e80, 1]: mmap(, 16384,,,, 0x18000) ok > bios: EBDA 0x00001 bytes at 0x18e80 >>> bios.2: rom >>> bios.3: smp >/dev/mem[0x9fc00, 1024]: mmap(, 16384,,,, 0x9c000) ok >----- BIOS data 0x00400 - 0x004ff ----- > 400 73 8e e3 42 65 6f 69 20 5e 4e 79 fe 87 96 e8 18 "s..Beoi ^Ny....." > 410 57 35 b7 bc df a0 88 24 a0 53 6b c1 e5 a4 1b 37 "W5.....$.Sk....7" > 420 f6 94 03 ba c8 7f 58 48 ac 14 36 c3 0d 8c 5b 39 "......XH..6...[9" > 430 be e2 aa 46 bd e0 9b 41 50 2f 12 bd c9 e8 bd 66 "...F...AP/.....f" > 440 fc a1 c3 4b 93 5e 3a 98 48 a1 a8 b9 19 b9 3d 7a "...K.^:.H.....=z" > 450 6c 4d 91 b2 78 60 bd 8b b0 d6 e0 45 91 70 f1 c5 "lM..x`.....E.p.." > 460 f9 43 87 97 26 bd 74 30 80 ca 95 4c 31 d3 f1 fc ".C..&.t0...L1..." > 470 d9 9a 22 65 f1 c0 7a 17 61 ad c1 8b 22 e1 e2 8b ".."e..z.a..."..." > 480 e2 0f ca 10 4f db 63 68 01 95 2b 99 62 a6 e3 f9 "....O.ch..+.b..." > 490 a2 bd 81 f5 e0 20 7f 26 c3 5a 83 17 45 c2 c5 17 "..... .&.Z..E..." > 4a0 d4 97 50 1e 9c 17 4d d8 03 2a 57 32 c5 4c c7 f3 "..P...M..*W2.L.." > 4b0 54 f3 c7 d4 c3 e0 74 44 96 3d c2 10 88 25 01 27 "T.....tD.=...%.'" > 4c0 a9 2f a1 3c 38 2f 9a b0 07 54 ae 64 8a 99 8e e7 "./.<8/...T.d...." > 4d0 b8 6e 4b 96 85 60 63 80 3c f3 40 1e 12 ea 88 46 ".nK..`c.<.@....F" > 4e0 53 5f 42 79 70 5e 34 61 0f a8 5c c9 14 33 1d cf "S_Byp^4a..\..3.." > 4f0 71 dd 96 2c 0b c1 c6 00 68 6e 45 03 26 75 9b 85 "q..,....hnE.&u.." >----- BIOS data end ----- >----- EBDA 0x18e80 - 0x18e80 ----- > 18e80 00 "." >----- EBDA end ----- >>> bios.4: vbe >/dev/mem[0xc0000, 3]: mmap(, 16384,,,, 0xc0000) ok >vbe: no bios found at: 0xc0000 >VBE: Could not init Int10 >>> bios.5: 32 >>> sys.1: cpu >>> misc.9: kernel log >----- kernel log ----- > <5>Linux version 2.6.13-11-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 SMP Sat Sep 10 13:18:02 UTC 2005 > <6>EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2a000 SMBIOS=0x3fb3a000 HCDP=0x3fb28000 > <6>booting generic kernel on platform hpzx1 > <6>PCDP: v0 at 0x3fb28000 > <6>Early serial console at MMIO 0xff5e0000 (options '115200n8') > <7>ACPI: RSDP (v002 HP ) @ 0x000000003fb2a000 > <7>ACPI: XSDT (v001 HP rx1600 0x00000000 HP 0x00000000) @ 0x000000003fb2a02c > <7>ACPI: FADT (v003 HP rx1600 0x00000000 HP 0x00000000) @ 0x000000003fb349e0 > <7>ACPI: SPCR (v001 HP rx1600 0x00000000 HP 0x00000000) @ 0x000000003fb34b18 > <7>ACPI: DBGP (v001 HP rx1600 0x00000000 HP 0x00000000) @ 0x000000003fb34b68 > <7>ACPI: MADT (v001 HP rx1600 0x00000000 HP 0x00000000) @ 0x000000003fb34c40 > <7>ACPI: SPMI (v004 HP rx1600 0x00000000 HP 0x00000000) @ 0x000000003fb34ba0 > <7>ACPI: CPEP (v001 HP rx1600 0x00000000 HP 0x00000000) @ 0x000000003fb34bf0 > <7>ACPI: SSDT (v001 HP rx1600 0x00000006 INTL 0x02012044) @ 0x000000003fb333a0 > <7>ACPI: SSDT (v001 HP rx1600 0x00000006 INTL 0x02012044) @ 0x000000003fb33530 > <7>ACPI: SSDT (v001 HP rx1600 0x00000006 INTL 0x02012044) @ 0x000000003fb33770 > <7>ACPI: SSDT (v001 HP rx1600 0x00000006 INTL 0x02012044) @ 0x000000003fb33fe0 > <7>ACPI: SSDT (v001 HP rx1600 0x00000006 INTL 0x02012044) @ 0x000000003fb34850 > <7>ACPI: SSDT (v001 HP rx1600 0x00000006 INTL 0x02012044) @ 0x000000003fb34910 > <7>ACPI: DSDT (v001 HP rx1600 0x00000007 INTL 0x02012044) @ 0x0000000000000000 > <4>warning: skipping physical page 0 > <4>warning: skipping physical page 0 > <4>warning: skipping physical page 0 > <6>Initial ramdisk at: 0xe0000040fd483000 (11636736 bytes) > <6>SAL 3.1: HP version 1.10 > <6>SAL Platform features: None > <6>SAL: AP wakeup using external interrupt vector 0xff > <6>No logical to physical processor mapping available > <6>ACPI: Local APIC address c0000000fee00000 > <6>GSI 36 (level, low) -> CPU 0 (0x0000) vector 48 > <6>2 CPUs available, 2 CPUs total > <6>MCA related initialization done > <4>warning: skipping physical page 0 > <4>Virtual mem_map starts at 0xa0007fffc7200000 > <7>On node 0 totalpages: 1046549 > <7> DMA zone: 1046549 pages, LIFO batch:7 > <7> Normal zone: 0 pages, LIFO batch:1 > <7> HighMem zone: 0 pages, LIFO batch:1 > <4>Built 1 zonelists > <5>Kernel command line: BOOT_IMAGE=net0:ia64/linux ramdisk_size=131072 rescue=1 install=nfs://10.10.0.4/machcd/CDs/SUSE-10.0-DVD-ia64-RC2/CD1 > <4>PID hash table entries: 4096 (order: 12, 131072 bytes) > <7>CPU 0: base freq=200.000MHz, ITC ratio=10/2, ITC freq=1000.000MHz+/-500ppm > <4>Console: colour dummy device 80x25 > <6>Memory: 16627408k/16744784k available (6384k code, 139216k reserved, 3000k data, 352k init) > <6>McKinley Errata 9 workaround not needed; disabling it > <7>Calibrating delay loop... 1499.13 BogoMIPS (lpj=2998272) > <4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved > <6>Security Framework v1.0.0 initialized > <6>SELinux: Disabled at boot. > <4>Dentry cache hash table entries: 2097152 (order: 10, 16777216 bytes) > <4>Inode-cache hash table entries: 1048576 (order: 9, 8388608 bytes) > <4>Mount-cache hash table entries: 1024 > <6>checking if image is initramfs... it is > <6>Freeing initrd memory: 11360kB freed > <6>ACPI: Looking for DSDT in initrd... not found! > <4> not found! > <6>Boot processor id 0x0/0x0 > <6>CPU 1: synchronized ITC with CPU 0 (last diff -6 cycles, maxerr 451 cycles) > <7>CPU 1: base freq=200.000MHz, ITC ratio=10/2, ITC freq=1000.000MHz+/-500ppm > <7>Calibrating delay loop... 1499.13 BogoMIPS (lpj=2998272) > <6>Brought up 2 CPUs > <6>Total of 2 processors activated (2998.27 BogoMIPS). > <6>NET: Registered protocol family 16 > <6>ACPI: bus type pci registered > <6>ACPI: Subsystem revision 20050408 > <6>ACPI: Interpreter enabled > <6>ACPI: Using IOSAPIC for interrupt routing > <6>ACPI: PCI Root Bridge [PCI0] (0000:00) > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI0] segment is 0 > <4>kernel unaligned access to 0xe0000040ffb97cc4, ip=0xa000000100394680 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI1] segment is 0 > <4>kernel unaligned access to 0xe0000040ffb97cc4, ip=0xa000000100394680 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI2] segment is 0 > <4>kernel unaligned access to 0xe0000040ffb97cc4, ip=0xa000000100394680 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI4] segment is 0 > <4>kernel unaligned access to 0xe0000040ffb97cc4, ip=0xa000000100394680 > <7>ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI0._PRT] > <6>ACPI: PCI Root Bridge [PCI1] (0000:20) > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI0] segment is 0 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI1] segment is 0 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI2] segment is 0 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI4] segment is 0 > <7>ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI1._PRT] > <6>ACPI: PCI Root Bridge [PCI2] (0000:40) > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI0] segment is 0 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI1] segment is 0 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI2] segment is 0 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI4] segment is 0 > <7>ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI2._PRT] > <6>ACPI: PCI Root Bridge [PCI4] (0000:80) > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI0] segment is 0 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI1] segment is 0 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI2] segment is 0 > <6>ACPI: Assume root bridge [\_SB_.SBA0.PCI4] segment is 0 > <7>ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI4._PRT] > <6>IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000 > <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) > <4>perfmon: version 2.0 IRQ 238 > <4>perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits) > <6>PAL Information Facility v0.5 > <6>perfmon: added sampling format default_format > <4>perfmon_default_smpl: default_format v2.0 registered > <6>audit: initializing netlink socket (disabled) > <4>audit(1126762266.128:1): initialized > <4>Total HugeTLB memory allocated, 0 > <5>VFS: Disk quotas dquot_6.5.1 > <4>Dquot-cache hash table entries: 2048 (order 0, 16384 bytes) > <6>Initializing Cryptographic API > <6>EFI Time Services Driver v0.4 > <3>i8042.c: No controller found. > <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > <6>GSI 34 (edge, low) -> CPU 1 (0x0100) vector 49 > <4>ttyS0 at MMIO 0xff5e0000 (irq = 49) is a 16550A > <6>io scheduler noop registered > <6>io scheduler anticipatory registered > <6>io scheduler deadline registered > <6>io scheduler cfq registered > <4>RAMDISK driver initialized: 16 RAM disks of 131072K size 1024 blocksize > <6>loop: loaded (max 8 devices) > <6>mice: PS/2 mouse device common for all mice > <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 > <6>md: bitmap version 3.38 > <6>EFI Variables Facility v0.08 2004-May-17 > <6>NET: Registered protocol family 2 > <4>IP route cache hash table entries: 2097152 (order: 10, 16777216 bytes) > <4>TCP established hash table entries: 8388608 (order: 13, 134217728 bytes) > <4>TCP bind hash table entries: 65536 (order: 6, 1048576 bytes) > <6>TCP: Hash tables configured (established 8388608 bind 65536) > <6>TCP reno registered > <6>NET: Registered protocol family 1 > <4>Adding console on ttyS0 at MMIO 0xff5e0000 (options '115200n8') > <6>Freeing unused kernel memory: 352kB freed > <6>NET: Registered protocol family 17 > <5>SCSI subsystem initialized > <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > <6>usbcore: registered new driver usbfs > <6>usbcore: registered new driver hub > <6>GSI 18 (level, low) -> CPU 0 (0x0000) vector 50 > <6>ACPI: PCI Interrupt 0000:00:01.2[C] -> GSI 18 (level, low) -> IRQ 50 > <6>ehci_hcd 0000:00:01.2: EHCI Host Controller > <6>ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 > <6>ehci_hcd 0000:00:01.2: irq 50, io mem 0x80021000 > <6>ehci_hcd 0000:00:01.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004 > <6>hub 1-0:1.0: USB hub found > <6>hub 1-0:1.0: 5 ports detected > <6>usbcore: registered new driver hiddev > <6>usbcore: registered new driver usbhid > <6>drivers/usb/input/hid-core.c: v2.01:USB HID core driver > <7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) > <6>GSI 16 (level, low) -> CPU 1 (0x0100) vector 51 > <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 51 > <6>ohci_hcd 0000:00:01.0: OHCI Host Controller > <6>ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2 > <6>ohci_hcd 0000:00:01.0: irq 51, io mem 0x80023000 > <6>hub 2-0:1.0: USB hub found > <6>hub 2-0:1.0: 3 ports detected > <6>GSI 17 (level, low) -> CPU 0 (0x0000) vector 52 > <6>ACPI: PCI Interrupt 0000:00:01.1[B] -> GSI 17 (level, low) -> IRQ 52 > <6>ohci_hcd 0000:00:01.1: OHCI Host Controller > <6>ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3 > <6>ohci_hcd 0000:00:01.1: irq 52, io mem 0x80022000 > <6>hub 3-0:1.0: USB hub found > <6>hub 3-0:1.0: 2 ports detected > <6>Initializing USB Mass Storage driver... > <6>usbcore: registered new driver usb-storage > <6>USB Mass Storage support registered. > <6>e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI > <6>e100: Copyright(c) 1999-2005 Intel Corporation > <6>GSI 20 (level, low) -> CPU 1 (0x0100) vector 53 > <6>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 53 > <6>e100: eth0: e100_probe: addr 0x80020000, irq 53, MAC addr 00:30:6E:4C:25:A4 > <6>tg3.c:v3.37 (August 25, 2005) > <6>GSI 29 (level, low) -> CPU 0 (0x0000) vector 54 > <6>ACPI: PCI Interrupt 0000:20:02.0[A] -> GSI 29 (level, low) -> IRQ 54 > <6>eth1: Tigon3 [partno(BCM95700A6) rev 0105 PHY(5701)] (PCI:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:30:6e:4c:25:a5 > <6>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] > <6>eth1: dma_rwctrl[76ff2d0f] > <6>CMD649: IDE controller at PCI slot 0000:00:02.0 > <6>GSI 21 (level, low) -> CPU 1 (0x0100) vector 55 > <6>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 21 (level, low) -> IRQ 55 > <6>CMD649: chipset revision 2 > <6>CMD649: 100% native mode on irq 55 > <6> ide0: BM-DMA at 0x0d40-0x0d47, BIOS settings: hda:pio, hdb:pio > <6> ide1: BM-DMA at 0x0d48-0x0d4f, BIOS settings: hdc:pio, hdd:pio > <7>Probing IDE interface ide0... > <4>hda: HL-DT-ST DVD+RW GCA-4040N, ATAPI CD/DVD-ROM drive > <4>ide0 at 0xd58-0xd5f,0xd66 on irq 55 > <6>hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA > <6>Uniform CD-ROM driver Revision: 3.20 > <7>Probing IDE interface ide1... > <6>Fusion MPT base driver 3.03.02 > <6>Copyright (c) 1999-2005 LSI Logic Corporation > <4>mptspi: module not supported by Novell, setting U taint flag. > <6>Fusion MPT SPI Host driver 3.03.02 > <6>GSI 27 (level, low) -> CPU 0 (0x0000) vector 56 > <6>ACPI: PCI Interrupt 0000:20:01.0[A] -> GSI 27 (level, low) -> IRQ 56 > <6>mptbase: Initiating ioc0 bringup > <6>ioc0: 53C1030: Capabilities={Initiator} > <6>scsi0 : ioc0: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=56 > <5> Vendor: HP 73.4G Model: ST373454LC Rev: HPC2 > <5> Type: Direct-Access ANSI SCSI revision: 03 > <5>SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB) > <5>SCSI device sda: drive cache: write through > <5>SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB) > <5>SCSI device sda: drive cache: write through > <6> sda: sda1 sda2 sda3 sda4 > <5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > <5>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 > <6>GSI 28 (level, low) -> CPU 1 (0x0100) vector 57 > <6>ACPI: PCI Interrupt 0000:20:01.1[B] -> GSI 28 (level, low) -> IRQ 57 > <6>mptbase: Initiating ioc1 bringup > <6>ioc1: 53C1030: Capabilities={Initiator} > <6>scsi1 : ioc1: LSI53C1030, FwRev=01030600h, Ports=1, MaxQ=255, IRQ=57 > <6>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex > <4>kernel unaligned access to 0xe0000040f9f67ce4, ip=0xa00000010055d8b1 > <4>kernel unaligned access to 0xe0000040f9f67ce4, ip=0xa00000010055d970 > <4>kernel unaligned access to 0xe0000040f9f67ce4, ip=0xa00000010055d8b1 > <4>kernel unaligned access to 0xe0000040f9f67ce4, ip=0xa00000010055d970 > <5>lockd: failed to open /var/lib/nfs/state: err=-2 > <6>md: Autodetecting RAID arrays. > <6>md: autorun ... > <6>md: ... autorun DONE. > <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com > <4>kernel unaligned access to 0xe00000010754fce4, ip=0xa00000010055d8b1 > <4>kernel unaligned access to 0xe00000010754fce4, ip=0xa00000010055d970 > <4>kernel unaligned access to 0xe00000010754fce4, ip=0xa00000010055d8b1 > <4>kernel unaligned access to 0xe00000010754fce4, ip=0xa00000010055d970 > <5>ReiserFS: sda3: found reiserfs format "3.6" with standard journal > <5>ReiserFS: sda3: using ordered data mode > <5>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 > <5>ReiserFS: sda3: checking transaction log (sda3) > <5>ReiserFS: sda3: Using r5 hash to sort names >----- kernel log end ----- >>> misc.1: misc data >>> misc.1.1: open serial >>> misc.1.2: open parallel >----- exec: "/sbin/modprobe parport " ----- > FATAL: Module lp not found. > FATAL: Error running install command for parport >----- return code: ? ----- >----- exec: "/sbin/modprobe parport_pc " ----- >----- return code: ? ----- >>> misc.2.1: io >>> misc.2.2: dma >>> misc.2.3: irq >----- /proc/ioports ----- > 00000000-00001fff : PCI Bus 0000:00 > 00000d00-00000d3f : 0000:00:03.0 > 00000d00-00000d3f : e100 > 00000d40-00000d4f : 0000:00:02.0 > 00000d40-00000d47 : ide0 > 00000d48-00000d4f : ide1 > 00000d50-00000d57 : 0000:00:02.0 > 00000d58-00000d5f : 0000:00:02.0 > 00000d58-00000d5f : ide0 > 00000d60-00000d63 : 0000:00:02.0 > 00000d64-00000d67 : 0000:00:02.0 > 00000d66-00000d66 : ide0 > 00002000-00003fff : PCI Bus 0000:20 > 00002000-000020ff : 0000:20:01.1 > 00002100-000021ff : 0000:20:01.0 > 00004000-00007fff : PCI Bus 0000:40 > 00008000-0000dfff : PCI Bus 0000:80 > ff5c1004-ff5c1007 : PM_TMR > ff5c1008-ff5c100b : PM1a_EVT_BLK > ff5c100c-ff5c100d : PM1a_CNT_BLK > ff5c1010-ff5c1013 : GPE0_BLK > ff5c1014-ff5c1017 : GPE1_BLK >----- /proc/ioports end ----- >----- /proc/interrupts ----- > 28: 2 2 LSAPIC cpe_poll > 29: 0 0 LSAPIC cmc_poll > 31: 0 0 LSAPIC cmc_hndlr > 48: 0 0 IO-SAPIC-level acpi > 49: 0 2749 IO-SAPIC-edge serial > 50: 0 0 IO-SAPIC-level ehci_hcd:usb1 > 51: 0 0 IO-SAPIC-level ohci_hcd:usb2 > 52: 0 0 IO-SAPIC-level ohci_hcd:usb3 > 55: 0 1091 IO-SAPIC-level ide0 > 56: 281 0 IO-SAPIC-level ioc0 > 57: 0 29 IO-SAPIC-level ioc1 > 232: 0 0 LSAPIC mca_rdzv > 238: 0 0 LSAPIC perfmon > 239: 66025 65394 LSAPIC timer > 240: 0 0 LSAPIC mca_wkup > 254: 165 159 LSAPIC IPI > ERR: 0 >----- /proc/interrupts end ----- >----- /proc/dma ----- >----- /proc/dma end ----- >>> misc.3: FPU >>> misc.3.1: DMA >>> misc.3.2: PIC >>> misc.3.3: timer >>> misc.3.4: RTC >>> cpu.1: cpuinfo >----- /proc/cpuinfo ----- > processor : 0 > vendor : GenuineIntel > arch : IA-64 > family : Itanium 2 > model : 1 > revision : 5 > archrev : 0 > features : branchlong > cpu number : 0 > cpu regs : 4 > cpu MHz : 1000.000000 > itc MHz : 1000.000000 > BogoMIPS : 1499.13 > siblings : 1 > > processor : 1 > vendor : GenuineIntel > arch : IA-64 > family : Itanium 2 > model : 1 > revision : 5 > archrev : 0 > features : branchlong > cpu number : 0 > cpu regs : 4 > cpu MHz : 1000.000000 > itc MHz : 1000.000000 > BogoMIPS : 1499.13 > siblings : 1 > >----- /proc/cpuinfo end ----- >>> memory.1: main memory size > kcore mem: 0x4100000000 > klog mem 0: 0x3f6db4000 > klog mem 1: 0x0 > klog mem: 0x3f6db4000 > bios mem: 0x0 > meminfo: 0x3f7924000 >>> pci.1: sysfs drivers >----- sysfs driver list (id 0xd1df91264322911b) ----- > ide-cdrom: /devices/pci0000:00/0000:00:02.0/ide0/0.0 > CMD64x_IDE: /devices/pci0000:00/0000:00:02.0 > e100: /devices/pci0000:00/0000:00:03.0 > ehci_hcd: /devices/pci0000:00/0000:00:01.2 > mptspi: /devices/pci0000:20/0000:20:01.0 > mptspi: /devices/pci0000:20/0000:20:01.1 > ohci_hcd: /devices/pci0000:00/0000:00:01.0 > ohci_hcd: /devices/pci0000:00/0000:00:01.1 > tg3: /devices/pci0000:20/0000:20:02.0 > serial8250: /devices/platform/serial8250 > sd: /devices/pci0000:20/0000:20:01.0/host0/target0:0:0/0:0:0:0 > hiddev: /module/usbhid > hub: /devices/pci0000:00/0000:00:01.2/usb1/1-0:1.0 > hub: /devices/pci0000:00/0000:00:01.0/usb2/2-0:1.0 > hub: /devices/pci0000:00/0000:00:01.1/usb3/3-0:1.0 > hub: /module/usbcore > usb-storage: /module/usb_storage > usbfs: /module/usbcore > usbhid: /module/usbhid > usb: /devices/pci0000:00/0000:00:01.2/usb1 > usb: /devices/pci0000:00/0000:00:01.0/usb2 > usb: /devices/pci0000:00/0000:00:01.1/usb3 > usb: /module/usbcore >----- sysfs driver list end ----- >>> pci.2: get sysfs pci data > pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci > path = /devices/pci0000:00/0000:00:01.0 > modalias = "pci:v00001033d00000035sv00001033sd00000035bc0Csc03i10 >" > class = 0xc0310 > vendor = 0x1033 > device = 0x35 > subvendor = 0x1033 > subdevice = 0x35 > irq = 51 > res[0] = 0x80023000 0x80023fff 0x200 > config[64] > pci device: name = 0000:00:01.1, bus_id = 0000:00:01.1, bus = pci > path = /devices/pci0000:00/0000:00:01.1 > modalias = "pci:v00001033d00000035sv00001033sd00000035bc0Csc03i10 >" > class = 0xc0310 > vendor = 0x1033 > device = 0x35 > subvendor = 0x1033 > subdevice = 0x35 > irq = 52 > res[0] = 0x80022000 0x80022fff 0x200 > config[64] > pci device: name = 0000:00:01.2, bus_id = 0000:00:01.2, bus = pci > path = /devices/pci0000:00/0000:00:01.2 > modalias = "pci:v00001033d000000E0sv00001033sd000000E0bc0Csc03i20 >" > class = 0xc0320 > vendor = 0x1033 > device = 0xe0 > subvendor = 0x1033 > subdevice = 0xe0 > irq = 50 > res[0] = 0x80021000 0x800210ff 0x200 > config[64] > pci device: name = 0000:00:02.0, bus_id = 0000:00:02.0, bus = pci > path = /devices/pci0000:00/0000:00:02.0 > modalias = "pci:v00001095d00000649sv00001095sd00000649bc01sc01i8f >" > class = 0x1018f > vendor = 0x1095 > device = 0x649 > subvendor = 0x1095 > subdevice = 0x649 > irq = 55 > res[0] = 0xd58 0xd5f 0x101 > res[1] = 0xd64 0xd67 0x101 > res[2] = 0xd50 0xd57 0x101 > res[3] = 0xd60 0xd63 0x101 > res[4] = 0xd40 0xd4f 0x101 > config[64] > pci device: name = 0000:00:03.0, bus_id = 0000:00:03.0, bus = pci > path = /devices/pci0000:00/0000:00:03.0 > modalias = "pci:v00008086d00001229sv0000103Csd00001274bc02sc00i00 >" > class = 0x20000 > vendor = 0x8086 > device = 0x1229 > subvendor = 0x103c > subdevice = 0x1274 > irq = 53 > res[0] = 0x80020000 0x80020fff 0x200 > res[1] = 0xd00 0xd3f 0x101 > res[2] = 0x80000000 0x8001ffff 0x200 > config[64] > pci device: name = 0000:20:01.0, bus_id = 0000:20:01.0, bus = pci > path = /devices/pci0000:20/0000:20:01.0 > modalias = "pci:v00001000d00000030sv00001000sd00001000bc01sc00i00 >" > class = 0x10000 > vendor = 0x1000 > device = 0x30 > subvendor = 0x1000 > subdevice = 0x1000 > irq = 56 > res[0] = 0x2100 0x21ff 0x101 > res[1] = 0x90240000 0x9024ffff 0x204 > res[3] = 0x90230000 0x9023ffff 0x204 > res[6] = 0x90100000 0x901fffff 0x7200 > config[64] > pci device: name = 0000:20:01.1, bus_id = 0000:20:01.1, bus = pci > path = /devices/pci0000:20/0000:20:01.1 > modalias = "pci:v00001000d00000030sv00001000sd00001000bc01sc00i00 >" > class = 0x10000 > vendor = 0x1000 > device = 0x30 > subvendor = 0x1000 > subdevice = 0x1000 > irq = 57 > res[0] = 0x2000 0x20ff 0x101 > res[1] = 0x90220000 0x9022ffff 0x204 > res[3] = 0x90210000 0x9021ffff 0x204 > res[6] = 0x90000000 0x900fffff 0x7200 > config[64] > pci device: name = 0000:20:02.0, bus_id = 0000:20:02.0, bus = pci > path = /devices/pci0000:20/0000:20:02.0 > modalias = "pci:v000014E4d00001645sv0000103Csd000012A4bc02sc00i00 >" > class = 0x20000 > vendor = 0x14e4 > device = 0x1645 > subvendor = 0x103c > subdevice = 0x12a4 > irq = 54 > res[0] = 0x90200000 0x9020ffff 0x204 > config[64] >---------- PCI raw data ---------- >bus 00, slot 01, func 0, vend:dev:s_vend:s_dev:rev 1033:0035:1033:0035:41 >class 0c, sub_class 03 prog_if 10, hdr 0, flags <pm>, irq 51 > addr0 80023000, size 00001000 > 00: 33 10 35 00 06 00 10 02 41 10 03 0c 20 80 80 00 "3.5.....A... ..." > 10: 00 30 02 80 00 00 00 00 00 00 00 00 00 00 00 00 ".0.............." > 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 35 00 "............3.5." > 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 01 2a "....@..........*" > 40: 01 00 ".." > >bus 00, slot 01, func 1, vend:dev:s_vend:s_dev:rev 1033:0035:1033:0035:41 >class 0c, sub_class 03 prog_if 10, hdr 0, flags <pm>, irq 52 > addr0 80022000, size 00001000 > 00: 33 10 35 00 06 00 10 02 41 10 03 0c 20 80 00 00 "3.5.....A... ..." > 10: 00 20 02 80 00 00 00 00 00 00 00 00 00 00 00 00 ". .............." > 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 35 00 "............3.5." > 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 02 01 2a "....@..........*" > 40: 01 00 ".." > >bus 00, slot 01, func 2, vend:dev:s_vend:s_dev:rev 1033:00e0:1033:00e0:02 >class 0c, sub_class 03 prog_if 20, hdr 0, flags <pm>, irq 50 > addr0 80021000, size 00000100 > 00: 33 10 e0 00 56 01 10 02 02 20 03 0c 20 80 00 00 "3...V.... .. ..." > 10: 00 10 02 80 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 33 10 e0 00 "............3..." > 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 03 10 22 "....@.........."" > 40: 01 00 ".." > >bus 00, slot 02, func 0, vend:dev:s_vend:s_dev:rev 1095:0649:1095:0649:02 >class 01, sub_class 01 prog_if 8f, hdr 0, flags <pm>, irq 55 > addr0 00000d58, size 00000008 > addr1 00000d64, size 00000004 > addr2 00000d50, size 00000008 > addr3 00000d60, size 00000004 > addr4 00000d40, size 00000010 > 00: 95 10 49 06 45 01 90 02 02 8f 01 01 00 40 00 00 "..I.E........@.." > 10: 59 0d 00 00 65 0d 00 00 51 0d 00 00 61 0d 00 00 "Y...e...Q...a..." > 20: 41 0d 00 00 00 00 00 00 00 00 00 00 95 10 49 06 "A.............I." > 30: 00 00 00 00 60 00 00 00 00 00 00 00 0e 01 02 04 "....`..........." > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 60: 01 00 ".." > >bus 00, slot 03, func 0, vend:dev:s_vend:s_dev:rev 8086:1229:103c:1274:0d >class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 53 > addr0 80020000, size 00001000 > addr1 00000d00, size 00000040 > addr2 80000000, size 00020000 > 00: 86 80 29 12 47 01 90 02 0d 00 00 02 00 80 00 00 "..).G..........." > 10: 00 00 02 80 01 0d 00 00 00 00 00 80 00 00 00 00 "................" > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 74 12 "............<.t." > 30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 01 08 38 "...............8" > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 ".............." > >bus 20, slot 01, func 0, vend:dev:s_vend:s_dev:rev 1000:0030:1000:1000:07 >class 01, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 56 > addr0 00002100, size 00000100 > addr1 90240000, size 00010000 > addr3 90230000, size 00010000 > 00: 00 10 30 00 47 01 30 02 07 00 00 01 20 c0 80 00 "..0.G.0..... ..." > 10: 01 21 00 00 04 00 24 90 00 00 00 00 04 00 23 90 ".!....$.......#." > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 10 "................" > 30: 00 00 10 90 50 00 00 00 00 00 00 00 00 01 11 12 "....P..........." > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 50: 01 58 00 00 00 00 00 00 05 00 ".X........" > >bus 20, slot 01, func 1, vend:dev:s_vend:s_dev:rev 1000:0030:1000:1000:07 >class 01, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 57 > addr0 00002000, size 00000100 > addr1 90220000, size 00010000 > addr3 90210000, size 00010000 > 00: 00 10 30 00 47 01 30 02 07 00 00 01 20 c0 80 00 "..0.G.0..... ..." > 10: 01 20 00 00 04 00 22 90 00 00 00 00 04 00 21 90 ". ....".......!." > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 10 "................" > 30: 00 00 00 90 50 00 00 00 00 00 00 00 00 02 11 12 "....P..........." > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" > 50: 01 58 00 00 00 00 00 00 05 00 ".X........" > >bus 20, slot 02, func 0, vend:dev:s_vend:s_dev:rev 14e4:1645:103c:12a4:15 >class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 54 > addr0 90200000, size 00010000 > 00: e4 14 45 16 46 01 b0 02 15 00 00 02 20 c0 00 00 "..E.F....... ..." > 10: 04 00 20 90 00 00 00 00 00 00 00 00 00 00 00 00 ".. ............." > 20: 00 00 00 00 00 00 00 00 00 00 00 00 3c 10 a4 12 "............<..." > 30: 00 00 00 00 40 00 00 00 00 00 00 00 20 01 40 00 "....@....... .@." > 40: 07 48 00 00 00 00 00 00 01 50 00 00 00 00 00 00 ".H.......P......" > 50: 03 58 00 00 00 00 00 00 05 00 ".X........" >---------- PCI raw data end ---------- >>> pci.4: build list >>> monitor.1: ddc >>> pcmcia.1: sysfs drivers >>> pcmcia.2: pcmcia >sysfs: no such bus: pcmcia >>> pcmcia.3: pcmcia ctrl >sysfs: no such class: pcmcia_socket >>> serial.1: read info >----- /proc/tty/driver/serial ----- > 0: uart:16550A mmio:0xFF5E0000 irq:49 tx:35344 rx:256 RTS|CTS|DTR|DSR|CD > 1: uart:unknown port:00000000 irq:0 > 2: uart:unknown port:00000000 irq:0 > 3: uart:unknown port:00000000 irq:0 >----- /proc/tty/driver/serial end ----- >----- serial info ----- >----- serial info end ----- >>> serial.2: build list >>> misc.5: misc data >----- misc resources ----- >i/o:0 0x0000 - 0x1fff (0x2000) "PCI Bus 0000:00" >i/o:0 0x0d00 - 0x0d3f (0x40) "0000:00:03.0" >i/o:0 0x0d00 - 0x0d3f (0x40) "e100" >i/o:0 0x0d40 - 0x0d4f (0x10) "0000:00:02.0" >i/o:1 0x0d40 - 0x0d47 (0x08) "ide0" >i/o:1 0x0d48 - 0x0d4f (0x08) "ide1" >i/o:0 0x0d50 - 0x0d57 (0x08) "0000:00:02.0" >i/o:0 0x0d58 - 0x0d5f (0x08) "0000:00:02.0" >i/o:1 0x0d58 - 0x0d5f (0x08) "ide0" >i/o:0 0x0d60 - 0x0d63 (0x04) "0000:00:02.0" >i/o:0 0x0d64 - 0x0d67 (0x04) "0000:00:02.0" >i/o:1 0x0d66 - 0x0d66 (0x01) "ide0" >i/o:0 0x2000 - 0x3fff (0x2000) "PCI Bus 0000:20" >i/o:0 0x2000 - 0x20ff (0x100) "0000:20:01.1" >i/o:0 0x2100 - 0x21ff (0x100) "0000:20:01.0" >i/o:0 0x4000 - 0x7fff (0x4000) "PCI Bus 0000:40" >i/o:0 0x8000 - 0xdfff (0x6000) "PCI Bus 0000:80" >i/o:0 0xff5c1004 - 0xff5c1007 (0x04) "PM_TMR" >i/o:0 0xff5c1008 - 0xff5c100b (0x04) "PM1a_EVT_BLK" >i/o:0 0xff5c100c - 0xff5c100d (0x02) "PM1a_CNT_BLK" >i/o:0 0xff5c1010 - 0xff5c1013 (0x04) "GPE0_BLK" >i/o:0 0xff5c1014 - 0xff5c1017 (0x04) "GPE1_BLK" >irq:0 28 ( 4) "cpe_poll" >irq:0 29 ( 0) "cmc_poll" >irq:0 31 ( 0) "cmc_hndlr" >irq:0 48 ( 0) "acpi" >irq:1 49 ( 2749) "serial" >irq:0 50 ( 0) "ehci_hcd:usb1" >irq:0 51 ( 0) "ohci_hcd:usb2" >irq:0 52 ( 0) "ohci_hcd:usb3" >irq:1 55 ( 1091) "ide0" >irq:0 56 ( 281) "ioc0" >irq:0 57 ( 29) "ioc1" >irq:0 232 ( 0) "mca_rdzv" >irq:0 238 ( 0) "perfmon" >irq:1 239 ( 131419) "timer" >irq:0 240 ( 0) "mca_wkup" >irq:0 254 ( 324) "IPI" >----- misc resources end ----- >>> parallel.1: pp mod >----- exec: "/sbin/rmmod parport_pc" ----- >----- return code: ? ----- >----- exec: "/sbin/modprobe parport_pc" ----- >----- return code: ? ----- >----- exec: "/sbin/modprobe lp" ----- > FATAL: Module lp not found. >----- return code: ? ----- >>> parallel.2.1: lp read info >>> parallel.2.2: lp read info >>> parallel.2.3: lp read info >----- parallel info ----- >----- parallel info end ----- >>> block.1: block modules >----- exec: "/sbin/modprobe st " ----- >----- return code: ? ----- >>> block.2: sysfs drivers >----- sysfs driver list (id 0x294b083b51c024a1) ----- > ide-cdrom: /devices/pci0000:00/0000:00:02.0/ide0/0.0 > CMD64x_IDE: /devices/pci0000:00/0000:00:02.0 > e100: /devices/pci0000:00/0000:00:03.0 > ehci_hcd: /devices/pci0000:00/0000:00:01.2 > mptspi: /devices/pci0000:20/0000:20:01.0 > mptspi: /devices/pci0000:20/0000:20:01.1 > ohci_hcd: /devices/pci0000:00/0000:00:01.0 > ohci_hcd: /devices/pci0000:00/0000:00:01.1 > tg3: /devices/pci0000:20/0000:20:02.0 > serial8250: /devices/platform/serial8250 > sd: /devices/pci0000:20/0000:20:01.0/host0/target0:0:0/0:0:0:0 > hiddev: /module/usbhid > hub: /devices/pci0000:00/0000:00:01.2/usb1/1-0:1.0 > hub: /devices/pci0000:00/0000:00:01.0/usb2/2-0:1.0 > hub: /devices/pci0000:00/0000:00:01.1/usb3/3-0:1.0 > hub: /module/usbcore > usb-storage: /module/usb_storage > usbfs: /module/usbcore > usbhid: /module/usbhid > usb: /devices/pci0000:00/0000:00:01.2/usb1 > usb: /devices/pci0000:00/0000:00:01.0/usb2 > usb: /devices/pci0000:00/0000:00:01.1/usb3 > usb: /module/usbcore >----- sysfs driver list end ----- >>> block.3: cdrom >----- /proc/sys/dev/cdrom/info ----- >drive name: hda >drive speed: 24 >drive # of slots: 1 >Can close tray: 1 >Can open tray: 1 >Can lock tray: 1 >Can change speed: 1 >Can select disk: 0 >Can read multisession: 1 >Can read MCN: 1 >Reports media changed: 1 >Can play audio: 1 >Can write CD-R: 1 >Can write CD-RW: 1 >Can read DVD: 1 >Can write DVD-R: 0 >Can write DVD-RAM: 0 >Can read MRW: 1 >Can write MRW: 1 >Can write RAM: 1 >----- /proc/sys/dev/cdrom/info end ----- >>> block.4: partition >----- /proc/partitions ----- > 7 0 119304 loop0 > 8 0 71687369 sda > 8 1 208816 sda1 > 8 2 2104383 sda2 > 8 3 8393440 sda3 > 8 4 5244896 sda4 >----- /proc/partitions end ----- >disks: > sda >partitions: > sda1 > sda2 > sda3 > sda4 >>> block.5: get sysfs block dev data > ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:02.0/ide0/0.0 > block: name = hda, path = /block/hda > dev = 3:0 > range = 1 > block device: bus = ide, bus_id = 0.0 driver = ide-cdrom > path = /devices/pci0000:00/0000:00:02.0/ide0/0.0 > block: name = loop0, path = /block/loop0 > dev = 7:0 > range = 1 > block: name = loop1, path = /block/loop1 > dev = 7:1 > range = 1 > block: name = loop2, path = /block/loop2 > dev = 7:2 > range = 1 > block: name = loop3, path = /block/loop3 > dev = 7:3 > range = 1 > block: name = loop4, path = /block/loop4 > dev = 7:4 > range = 1 > block: name = loop5, path = /block/loop5 > dev = 7:5 > range = 1 > block: name = loop6, path = /block/loop6 > dev = 7:6 > range = 1 > block: name = loop7, path = /block/loop7 > dev = 7:7 > range = 1 > block: name = md0, path = /block/md0 > dev = 9:0 > range = 1 > block: name = ram0, path = /block/ram0 > dev = 1:0 > range = 1 > block: name = ram10, path = /block/ram10 > dev = 1:10 > range = 1 > block: name = ram11, path = /block/ram11 > dev = 1:11 > range = 1 > block: name = ram12, path = /block/ram12 > dev = 1:12 > range = 1 > block: name = ram13, path = /block/ram13 > dev = 1:13 > range = 1 > block: name = ram14, path = /block/ram14 > dev = 1:14 > range = 1 > block: name = ram15, path = /block/ram15 > dev = 1:15 > range = 1 > block: name = ram1, path = /block/ram1 > dev = 1:1 > range = 1 > block: name = ram2, path = /block/ram2 > dev = 1:2 > range = 1 > block: name = ram3, path = /block/ram3 > dev = 1:3 > range = 1 > block: name = ram4, path = /block/ram4 > dev = 1:4 > range = 1 > block: name = ram5, path = /block/ram5 > dev = 1:5 > range = 1 > block: name = ram6, path = /block/ram6 > dev = 1:6 > range = 1 > block: name = ram7, path = /block/ram7 > dev = 1:7 > range = 1 > block: name = ram8, path = /block/ram8 > dev = 1:8 > range = 1 > block: name = ram9, path = /block/ram9 > dev = 1:9 > range = 1 > block: name = sda, path = /block/sda > dev = 8:0 > range = 16 > block device: bus = scsi, bus_id = 0:0:0:0 driver = sd > path = /devices/pci0000:20/0000:20:01.0/host0/target0:0:0/0:0:0:0 > vendor = HP 73.4G > model = ST373454LC > rev = HPC2 > type = 0 >>> block.5: /dev/sda >>> block.5.1: /dev/sda geo > dev = /dev/sda, fd = 3 > open ok, fd = 3 >/dev/sda: ioctl(geo) ok >/dev/sda: ioctl(block size) ok >/dev/sda: ioctl(disk size) ok >>> block.5.2: /dev/sda serial > serial id len: 20 >>> scsi.1: scsi modules >>> scsi.2: scsi tape >>> scsi.3: scsi generic > scsi: name = sg0, path = /class/scsi_generic/sg0 > dev = 21:0 > scsi device: bus = scsi, bus_id = 0:0:0:0 driver = sd > path = /devices/pci0000:20/0000:20:01.0/host0/target0:0:0/0:0:0:0 >>> usb.1: sysfs drivers >>> usb.2: usb > usb dev: /devices/pci0000:00/0000:00:01.2/usb1 > usb dev: /devices/pci0000:00/0000:00:01.0/usb2 > usb dev: /devices/pci0000:00/0000:00:01.1/usb3 > usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb > path = /devices/pci0000:00/0000:00:01.2/usb1/1-0:1.0 > modalias = "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*" > bInterfaceNumber = 0 > bInterfaceClass = 9 > bInterfaceSubClass = 0 > bInterfaceProtocol = 0 > if: 1-0:1.0 @ /devices/pci0000:00/0000:00:01.2/usb1 > bDeviceClass = 9 > bDeviceSubClass = 0 > bDeviceProtocol = 1 > idVendor = 0x0000 > idProduct = 0x0000 > manufacturer = "Linux 2.6.13-11-default ehci_hcd" > product = "EHCI Host Controller" > serial = "0000:00:01.2" > bcdDevice = 0206 > speed = "480" > usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb > path = /devices/pci0000:00/0000:00:01.0/usb2/2-0:1.0 > modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*" > bInterfaceNumber = 0 > bInterfaceClass = 9 > bInterfaceSubClass = 0 > bInterfaceProtocol = 0 > if: 2-0:1.0 @ /devices/pci0000:00/0000:00:01.0/usb2 > bDeviceClass = 9 > bDeviceSubClass = 0 > bDeviceProtocol = 0 > idVendor = 0x0000 > idProduct = 0x0000 > manufacturer = "Linux 2.6.13-11-default ohci_hcd" > product = "OHCI Host Controller" > serial = "0000:00:01.0" > bcdDevice = 0206 > speed = "12" > usb device: name = 3-0:1.0, bus_id = 3-0:1.0, bus = usb > path = /devices/pci0000:00/0000:00:01.1/usb3/3-0:1.0 > modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*" > bInterfaceNumber = 0 > bInterfaceClass = 9 > bInterfaceSubClass = 0 > bInterfaceProtocol = 0 > if: 3-0:1.0 @ /devices/pci0000:00/0000:00:01.1/usb3 > bDeviceClass = 9 > bDeviceSubClass = 0 > bDeviceProtocol = 0 > idVendor = 0x0000 > idProduct = 0x0000 > manufacturer = "Linux 2.6.13-11-default ohci_hcd" > product = "OHCI Host Controller" > serial = "0000:00:01.1" > bcdDevice = 0206 > speed = "12" > usb device: name = usb1, bus_id = usb1, bus = usb > path = /devices/pci0000:00/0000:00:01.2/usb1 > usb device: name = usb2, bus_id = usb2, bus = usb > path = /devices/pci0000:00/0000:00:01.0/usb2 > usb device: name = usb3, bus_id = usb3, bus = usb > path = /devices/pci0000:00/0000:00:01.1/usb3 >>> usb.3.1: joydev mod >----- exec: "/sbin/modprobe joydev " ----- > FATAL: Module joydev not found. >----- return code: ? ----- >>> usb.3.2: evdev mod >----- exec: "/sbin/modprobe evdev " ----- > FATAL: Module evdev not found. >----- return code: ? ----- >>> usb.3.3: input > input: name = mice, path = /class/input/mice > dev = 13:63 >>> usb.3.4: lp >>> usb.3.5: serial >>> edd.1: edd mod >----- exec: "/sbin/modprobe edd " ----- > FATAL: Module edd not found. >----- return code: ? ----- >>> edd.2: edd info >>> modem.1: serial >****** started child process 2110 (15s/120s) ****** >****** stopped child process 2110 (120s) ****** >>> mouse.2: serial >****** started child process 2111 (20s/20s) ****** >****** stopped child process 2111 (20s) ****** >>> input.1: joydev mod >----- exec: "/sbin/modprobe joydev " ----- > FATAL: Module joydev not found. >----- return code: ? ----- >>> input.1.1: evdev mod >----- exec: "/sbin/modprobe evdev " ----- > FATAL: Module evdev not found. >----- return code: ? ----- >>> input.2: input >----- /proc/bus/input/devices ----- >----- /proc/bus/input/devices end ----- >>> kbd.2: uml >>> cpu.1: cpuinfo >----- /proc/cpuinfo ----- > processor : 0 > vendor : GenuineIntel > arch : IA-64 > family : Itanium 2 > model : 1 > revision : 5 > archrev : 0 > features : branchlong > cpu number : 0 > cpu regs : 4 > cpu MHz : 1000.000000 > itc MHz : 1000.000000 > BogoMIPS : 1499.13 > siblings : 1 > > processor : 1 > vendor : GenuineIntel > arch : IA-64 > family : Itanium 2 > model : 1 > revision : 5 > archrev : 0 > features : branchlong > cpu number : 0 > cpu regs : 4 > cpu MHz : 1000.000000 > itc MHz : 1000.000000 > BogoMIPS : 1499.13 > siblings : 1 > >----- /proc/cpuinfo end ----- >>> kbd.3: serial console >/dev/console: major 4, minor 64 >serial console at line 0 >>> fb.1: read info >>> net.1: get network data > net interface: name = eth0, classname = net, path = /class/net/eth0 > type = 1 > hw_addr = 00:30:6e:4c:25:a4 > net device: path = /devices/pci0000:00/0000:00:03.0 > ethtool driver: e100 > ethtool bus: 0000:00:03.0 > net interface: name = eth1, classname = net, path = /class/net/eth1 > type = 1 > hw_addr = 00:30:6e:4c:25:a5 > net device: path = /devices/pci0000:20/0000:20:02.0 > ethtool driver: tg3 > ethtool bus: 0000:20:02.0 > net interface: name = lo, classname = net, path = /class/net/lo > type = 772 > hw_addr = 00:00:00:00:00:00 > eth0: ethtool link state: 1 > eth1: ethtool link state: 0 > lo: ethtool link state: 1 >>> pppoe.1: looking for pppoe >>> pppoe.2: discovery >Attempt number 1 >eth0: Sending PADI packet >send failed: Network is down >eth1: Sending PADI packet >send failed: Network is down >>> 38.1: detecting wlan features >>> 38.2: assign udi >>> isdn.1: list >>> dsl.1: list >>> int.2: cdrom >>> int.3: media >>> int.4.1: /dev/sda > read_block0: 512 bytes (5s, 0us) >>> int.4: floppy >>> int.6: mouse >>> int.7: hdb >>> int.8: usbscsi >>> int.9: hotplug >>> int.10: modem >>> int.11: wlan >>> int.12: udev >----- udevinfo ----- >----- udevinfo end ----- >>> int.13: device names >>> int.16: parent > prop read: rdCR.lZF+r4EgHp4 (failed) > old prop read: rdCR.lZF+r4EgHp4 (failed) > prop read: rdCR.n_7QNeEnh23 (failed) > old prop read: rdCR.n_7QNeEnh23 (failed) > prop read: rdCR.AJKleuxpiP0 (failed) > old prop read: rdCR.AJKleuxpiP0 (failed) > prop read: rdCR.DziBbWO85o5 (failed) > old prop read: rdCR.DziBbWO85o5 (failed) > prop read: rdCR.CxwsZFjVASF (failed) > old prop read: rdCR.CxwsZFjVASF (failed) > prop read: /org/freedesktop/Hal/devices/pci_1033_35_0 (failed) > prop read: vSkL.K7e_HsnvX9F (failed) > old prop read: vSkL.K7e_HsnvX9F (failed) > prop read: /org/freedesktop/Hal/devices/pci_1033_35 (failed) > prop read: mnDB.K7e_HsnvX9F (failed) > old prop read: mnDB.K7e_HsnvX9F (failed) > prop read: /org/freedesktop/Hal/devices/pci_1033_e0 (failed) > prop read: e6j0.RsvbES4Pp54 (failed) > old prop read: e6j0.RsvbES4Pp54 (failed) > prop read: /org/freedesktop/Hal/devices/pci_1095_649 (failed) > prop read: _Znp.+FvLqQBuG_7 (failed) > old prop read: _Znp.+FvLqQBuG_7 (failed) > prop read: /org/freedesktop/Hal/devices/pci_8086_1229 (failed) > prop read: rBUF.6SbwVcFLQRE (failed) > old prop read: rBUF.6SbwVcFLQRE (failed) > prop read: /org/freedesktop/Hal/devices/pci_1000_30_0 (failed) > prop read: UTtW.CSW9Y6zv7tD (failed) > old prop read: UTtW.CSW9Y6zv7tD (failed) > prop read: /org/freedesktop/Hal/devices/pci_1000_30 (failed) > prop read: MoMM.CSW9Y6zv7tD (failed) > old prop read: MoMM.CSW9Y6zv7tD (failed) > prop read: /org/freedesktop/Hal/devices/pci_14e4_1645 (failed) > prop read: JNkJ.GkJQjXPjWl4 (failed) > old prop read: JNkJ.GkJQjXPjWl4 (failed) > prop read: rdCR.7RG8lK_UzJ9 (failed) > old prop read: rdCR.7RG8lK_UzJ9 (failed) > prop read: /org/freedesktop/Hal/devices/storage_model_HL_DT_ST_DVD_RW_GCA_4040N (failed) > prop read: Fffu.G2Hnrqff1iF (failed) > old prop read: Fffu.G2Hnrqff1iF (failed) > prop read: /org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C (failed) > prop read: _q_W._tDc13tMzFD (failed) > old prop read: _q_W._tDc13tMzFD (failed) > prop read: /org/freedesktop/Hal/devices/volume_part1_size_213827584 (failed) > prop read: 1tKY.SE1wIdpsiiC (failed) > old prop read: 1tKY.SE1wIdpsiiC (failed) > prop read: /org/freedesktop/Hal/devices/volume_part2_size_2154888704 (failed) > prop read: U2bc.SE1wIdpsiiC (failed) > old prop read: U2bc.SE1wIdpsiiC (failed) > prop read: /org/freedesktop/Hal/devices/volume_uuid_cc0603a8_d983_4b15_8817_54962567c2a1 (failed) > prop read: xDrg.SE1wIdpsiiC (failed) > old prop read: xDrg.SE1wIdpsiiC (failed) > prop read: /org/freedesktop/Hal/devices/volume_uuid_87a57e02_6212_4fed_9640_7fc79d4c82f3 (failed) > prop read: OP5l.SE1wIdpsiiC (failed) > old prop read: OP5l.SE1wIdpsiiC (failed) > prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_2_if0 (failed) > prop read: k4bc.JGTS_63628C (failed) > old prop read: k4bc.JGTS_63628C (failed) > prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_0_if0 (failed) > prop read: pBe4.rzvp3S1Gb95 (failed) > old prop read: pBe4.rzvp3S1Gb95 (failed) > prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_1_if0 (failed) > prop read: uIhY.ci_ORCqzXRC (failed) > old prop read: uIhY.ci_ORCqzXRC (failed) > prop read: rdCR.j8NaKXDZtZ6 (failed) > old prop read: rdCR.j8NaKXDZtZ6 (failed) > prop read: wkFv.j8NaKXDZtZ6 (failed) > old prop read: wkFv.j8NaKXDZtZ6 (failed) > prop read: Fyby.5lXXuQkv_C5 (failed) > old prop read: Fyby.5lXXuQkv_C5 (failed) > prop read: /org/freedesktop/Hal/devices/net_00_30_6e_4c_25_a4 (failed) > prop read: usDW.ndpeucax6V1 (failed) > old prop read: usDW.ndpeucax6V1 (failed) > prop read: /org/freedesktop/Hal/devices/net_00_30_6e_4c_25_a5 (failed) > prop read: L2Ua.ndpeucax6V1 (failed) > old prop read: L2Ua.ndpeucax6V1 (failed) > prop read: ZsBS.GQNx7L4uPNA (failed) > old prop read: ZsBS.GQNx7L4uPNA (failed) >----- /proc/modules ----- > st 153984 0 - Live 0xa00000020af48000 > parport_pc 134080 0 - Live 0xa00000020af20000 > parport 156352 1 parport_pc, Live 0xa00000020aef4000 > reiserfs 697648 1 - Live 0xa00000020af98000 > binfmt_misc 91488 1 - Live 0xa00000020ac88000 > dm_mod 195376 0 - Live 0xa00000020ae90000 > mptspi 79020 0 - Live 0xa00000020aa6c000 > mptscsih 139036 1 mptspi, Live 0xa00000020ae10000 > mptbase 159040 2 mptspi,mptscsih, Live 0xa00000020ade4000 > cmd64x 93032 0 [permanent], Live 0xa00000020a9fc000 > tg3 309256 0 - Live 0xa00000020ae40000 > e100 156294 0 - Live 0xa00000020adb8000 > mii 78008 1 e100, Live 0xa00000020aa54000 > usb_storage 219679 0 - Live 0xa00000020ad7c000 > ohci_hcd 122008 0 - Live 0xa00000020ac64000 > usbhid 181076 0 - Live 0xa00000020ad00000 > ehci_hcd 147184 0 - Live 0xa00000020ac3c000 > usbcore 329180 5 usb_storage,ohci_hcd,usbhid,ehci_hcd, Live 0xa00000020aca8000 > ide_disk 101560 0 - Live 0xa00000020aba4000 > ide_cd 150312 0 - Live 0xa00000020ab78000 > ide_core 346696 4 cmd64x,usb_storage,ide_disk,ide_cd, Live 0xa00000020abe0000 > sg 150528 0 - Live 0xa00000020aaf0000 > sr_mod 103104 0 - Live 0xa00000020aad0000 > sd_mod 105620 2 - Live 0xa00000020aab0000 > scsi_mod 328656 7 st,mptspi,mptscsih,usb_storage,sg,sr_mod,sd_mod, Live 0xa00000020ab20000 > cdrom 148944 2 ide_cd,sr_mod, Live 0xa00000020aa84000 > cramfs 217304 0 - Live 0xa00000020aa18000 > nls_iso8859_1 71840 0 - Live 0xa00000020a9ac000 > af_packet 180688 0 - Live 0xa00000020a9c8000 >----- /proc/modules end ----- > used irqs: 28,29,31,48,49,50,51,52,53,54,55,56,57 >=========== end debug info ============ >01: None 00.0: 10105 BIOS > [Created at bios.154] > Unique ID: rdCR.lZF+r4EgHp4 > Hardware Class: bios > BIOS Keyboard LED Status: > Scroll Lock: off > Num Lock: on > Caps Lock: on > Config Status: cfg=new, avail=yes, need=no, active=unknown > >02: None 00.0: 10107 System > [Created at sys.56] > Unique ID: rdCR.n_7QNeEnh23 > Hardware Class: system > Model: "System" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >03: None 00.0: 0802 Timer (8254) > [Created at misc.228] > Unique ID: rdCR.AJKleuxpiP0 > Hardware Class: unknown > Model: "Timer" > IRQ: 239 (131419 events) > Config Status: cfg=new, avail=yes, need=no, active=unknown > >04: None 00.0: 10400 PS/2 Controller > [Created at misc.302] > Unique ID: rdCR.DziBbWO85o5 > Hardware Class: unknown > Model: "PS/2 Controller" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >07: None 00.0: 10102 Main Memory > [Created at memory.59] > Unique ID: rdCR.CxwsZFjVASF > Hardware Class: memory > Model: "Main Memory" > Memory Range: 0x00000000-0x3f7923fff (rw) > Memory Size: 16 GB > Config Status: cfg=new, avail=yes, need=no, active=unknown > >08: PCI 01.0: 0c03 USB Controller (OHCI) > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_1033_35_0 > Unique ID: vSkL.K7e_HsnvX9F > SysFS ID: /devices/pci0000:00/0000:00:01.0 > SysFS BusID: 0000:00:01.0 > Hardware Class: usb controller > Model: "NEC USB" > Vendor: pci 0x1033 "NEC Corporation" > Device: pci 0x0035 "USB" > SubVendor: pci 0x1033 "NEC Corporation" > SubDevice: pci 0x0035 > Revision: 0x41 > Driver: "ohci_hcd" > Memory Range: 0x80023000-0x80023fff (rw,non-prefetchable) > IRQ: 51 (no events) > Module Alias: "pci:v00001033d00000035sv00001033sd00000035bc0Csc03i10" > Driver Info #0: > Driver Status: ohci-hcd is active > Driver Activation Cmd: "modprobe ohci-hcd" > Driver Info #1: > Driver Status: ohci_hcd is active > Driver Activation Cmd: "modprobe ohci_hcd" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >09: PCI 01.1: 0c03 USB Controller (OHCI) > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_1033_35 > Unique ID: mnDB.K7e_HsnvX9F > SysFS ID: /devices/pci0000:00/0000:00:01.1 > SysFS BusID: 0000:00:01.1 > Hardware Class: usb controller > Model: "NEC USB" > Vendor: pci 0x1033 "NEC Corporation" > Device: pci 0x0035 "USB" > SubVendor: pci 0x1033 "NEC Corporation" > SubDevice: pci 0x0035 > Revision: 0x41 > Driver: "ohci_hcd" > Memory Range: 0x80022000-0x80022fff (rw,non-prefetchable) > IRQ: 52 (no events) > Module Alias: "pci:v00001033d00000035sv00001033sd00000035bc0Csc03i10" > Driver Info #0: > Driver Status: ohci-hcd is active > Driver Activation Cmd: "modprobe ohci-hcd" > Driver Info #1: > Driver Status: ohci_hcd is active > Driver Activation Cmd: "modprobe ohci_hcd" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >10: PCI 01.2: 0c03 USB Controller (EHCI) > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_1033_e0 > Unique ID: e6j0.RsvbES4Pp54 > SysFS ID: /devices/pci0000:00/0000:00:01.2 > SysFS BusID: 0000:00:01.2 > Hardware Class: usb controller > Model: "NEC USB 2.0" > Vendor: pci 0x1033 "NEC Corporation" > Device: pci 0x00e0 "USB 2.0" > SubVendor: pci 0x1033 "NEC Corporation" > SubDevice: pci 0x00e0 > Revision: 0x02 > Driver: "ehci_hcd" > Memory Range: 0x80021000-0x800210ff (rw,non-prefetchable) > IRQ: 50 (no events) > Module Alias: "pci:v00001033d000000E0sv00001033sd000000E0bc0Csc03i20" > Driver Info #0: > Driver Status: ehci-hcd is active > Driver Activation Cmd: "modprobe ehci-hcd" > Driver Info #1: > Driver Status: ehci_hcd is active > Driver Activation Cmd: "modprobe ehci_hcd" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >11: PCI 02.0: 0101 IDE interface > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_1095_649 > Unique ID: _Znp.+FvLqQBuG_7 > SysFS ID: /devices/pci0000:00/0000:00:02.0 > SysFS BusID: 0000:00:02.0 > Hardware Class: storage > Model: "Silicon Image SiI 0649 Ultra ATA/100 PCI to ATA Host Controller" > Vendor: pci 0x1095 "Silicon Image, Inc." > Device: pci 0x0649 "SiI 0649 Ultra ATA/100 PCI to ATA Host Controller" > SubVendor: pci 0x1095 "Silicon Image, Inc." > SubDevice: pci 0x0649 > Revision: 0x02 > Driver: "CMD64x_IDE" > I/O Ports: 0xd58-0xd5f (rw) > I/O Ports: 0xd64-0xd67 (rw) > I/O Ports: 0xd50-0xd57 (rw) > I/O Ports: 0xd60-0xd63 (rw) > I/O Ports: 0xd40-0xd4f (rw) > IRQ: 55 (1091 events) > Module Alias: "pci:v00001095d00000649sv00001095sd00000649bc01sc01i8f" > Driver Info #0: > Driver Status: cmd64x is active > Driver Activation Cmd: "modprobe cmd64x" > Driver Info #1: > Driver Status: generic is not active > Driver Activation Cmd: "modprobe generic" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >12: PCI 03.0: 0200 Ethernet controller > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_8086_1229 > Unique ID: rBUF.6SbwVcFLQRE > SysFS ID: /devices/pci0000:00/0000:00:03.0 > SysFS BusID: 0000:00:03.0 > Hardware Class: network > Model: "Hewlett-Packard Company 82557/8/9 [Ethernet Pro 100]" > Vendor: pci 0x8086 "Intel Corporation" > Device: pci 0x1229 "82557/8/9 [Ethernet Pro 100]" > SubVendor: pci 0x103c "Hewlett-Packard Company" > SubDevice: pci 0x1274 > Revision: 0x0d > Driver: "e100" > Device File: eth0 > Memory Range: 0x80020000-0x80020fff (rw,non-prefetchable) > I/O Ports: 0xd00-0xd3f (rw) > Memory Range: 0x80000000-0x8001ffff (rw,non-prefetchable) > IRQ: 53 (no events) > HW Address: 00:30:6e:4c:25:a4 > Link detected: yes > Module Alias: "pci:v00008086d00001229sv0000103Csd00001274bc02sc00i00" > Driver Info #0: > Driver Status: e100 is active > Driver Activation Cmd: "modprobe e100" > Driver Info #1: > Driver Status: eepro100 is not active > Driver Activation Cmd: "modprobe eepro100" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >13: PCI 2001.0: 0100 SCSI storage controller > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_1000_30_0 > Unique ID: UTtW.CSW9Y6zv7tD > SysFS ID: /devices/pci0000:20/0000:20:01.0 > SysFS BusID: 0000:20:01.0 > Hardware Class: storage > Model: "LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI" > Vendor: pci 0x1000 "LSI Logic / Symbios Logic" > Device: pci 0x0030 "53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI" > SubVendor: pci 0x1000 "LSI Logic / Symbios Logic" > SubDevice: pci 0x1000 > Revision: 0x07 > Driver: "mptspi" > I/O Ports: 0x2100-0x21ff (rw) > Memory Range: 0x90240000-0x9024ffff (rw,non-prefetchable) > Memory Range: 0x90230000-0x9023ffff (rw,non-prefetchable) > Memory Range: 0x90100000-0x901fffff (ro,prefetchable,disabled) > IRQ: 56 (281 events) > Module Alias: "pci:v00001000d00000030sv00001000sd00001000bc01sc00i00" > Driver Info #0: > Driver Status: mptspi is active > Driver Activation Cmd: "modprobe mptspi" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >14: PCI 2001.1: 0100 SCSI storage controller > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_1000_30 > Unique ID: MoMM.CSW9Y6zv7tD > SysFS ID: /devices/pci0000:20/0000:20:01.1 > SysFS BusID: 0000:20:01.1 > Hardware Class: storage > Model: "LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI" > Vendor: pci 0x1000 "LSI Logic / Symbios Logic" > Device: pci 0x0030 "53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI" > SubVendor: pci 0x1000 "LSI Logic / Symbios Logic" > SubDevice: pci 0x1000 > Revision: 0x07 > Driver: "mptspi" > I/O Ports: 0x2000-0x3fff (rw) > Memory Range: 0x90220000-0x9022ffff (rw,non-prefetchable) > Memory Range: 0x90210000-0x9021ffff (rw,non-prefetchable) > Memory Range: 0x90000000-0x900fffff (ro,prefetchable,disabled) > IRQ: 57 (29 events) > Module Alias: "pci:v00001000d00000030sv00001000sd00001000bc01sc00i00" > Driver Info #0: > Driver Status: mptspi is active > Driver Activation Cmd: "modprobe mptspi" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >15: PCI 2002.0: 0200 Ethernet controller > [Created at pci.277] > UDI: /org/freedesktop/Hal/devices/pci_14e4_1645 > Unique ID: JNkJ.GkJQjXPjWl4 > SysFS ID: /devices/pci0000:20/0000:20:02.0 > SysFS BusID: 0000:20:02.0 > Hardware Class: network > Model: "Hewlett-Packard Company Core Lan 1000Base-T" > Vendor: pci 0x14e4 "Broadcom" > Device: pci 0x1645 "NetXtreme BCM5701 Gigabit Ethernet" > SubVendor: pci 0x103c "Hewlett-Packard Company" > SubDevice: pci 0x12a4 "Core Lan 1000Base-T" > Revision: 0x15 > Driver: "tg3" > Device File: eth1 > Memory Range: 0x90200000-0x9020ffff (rw,non-prefetchable) > IRQ: 54 (no events) > HW Address: 00:30:6e:4c:25:a5 > Link detected: no > Module Alias: "pci:v000014E4d00001645sv0000103Csd000012A4bc02sc00i00" > Driver Info #0: > Driver Status: tg3 is active > Driver Activation Cmd: "modprobe tg3" > Driver Info #1: > Driver Status: bcm5700 is not active > Driver Activation Cmd: "modprobe bcm5700" > Config Status: cfg=new, avail=yes, need=no, active=unknown > >16: None 00.0: 0700 Serial controller > [Created at misc.458] > Unique ID: rdCR.7RG8lK_UzJ9 > Hardware Class: unknown > Model: "Serial controller" > IRQ: 49 (2749 events) > Config Status: cfg=new, avail=yes, need=no, active=unknown > >17: IDE 00.0: 10602 CD-ROM (CD-RW) > [Created at block.192] > UDI: /org/freedesktop/Hal/devices/storage_model_HL_DT_ST_DVD_RW_GCA_4040N > Unique ID: Fffu.G2Hnrqff1iF > Parent ID: _Znp.+FvLqQBuG_7 > SysFS ID: /block/hda > SysFS BusID: 0.0 > SysFS Device Link: /devices/pci0000:00/0000:00:02.0/ide0/0.0 > Hardware Class: cdrom > Model: "HL-DT-ST DVD+RW GCA-4040N" > Vendor: "HL-DT-ST" > Device: "DVD+RW GCA-4040N" > Revision: "1.20" > Serial ID: "" > Driver: "CMD64x_IDE", "ide-cdrom", "ide-cdrom" > Device File: /dev/hda > Device Number: block 3:0 > Features: CD-R, CD-RW, DVD > Drive status: no medium > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #11 (IDE interface) > Drive Speed: 24 > >18: SCSI 00.0: 10600 Disk > [Created at block.188] > UDI: /org/freedesktop/Hal/devices/storage_serial_3KP032TD00007530W71C > Unique ID: _q_W._tDc13tMzFD > Parent ID: UTtW.CSW9Y6zv7tD > SysFS ID: /block/sda > SysFS BusID: 0:0:0:0 > SysFS Device Link: /devices/pci0000:20/0000:20:01.0/host0/target0:0:0/0:0:0:0 > Hardware Class: disk > Model: "HP 73.4G ST373454LC" > Vendor: "HP 73.4G" > Device: "ST373454LC" > Revision: "HPC2" > Serial ID: "3KP032TD00007530W71C" > Driver: "mptspi", "sd" > Device File: /dev/sda (/dev/sg0) > Device Number: block 8:0-8:15 (char 21:0) > Geometry (Logical): CHS 8924/255/63 > Size: 143374738 sectors a 512 bytes > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #13 (SCSI storage controller) > >19: None 00.0: 11300 Partition > [Created at block.357] > UDI: /org/freedesktop/Hal/devices/volume_part1_size_213827584 > Unique ID: 1tKY.SE1wIdpsiiC > Parent ID: _q_W._tDc13tMzFD > SysFS ID: /block/sda/sda1 > Hardware Class: partition > Model: "Partition" > Device File: /dev/sda1 > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #18 (Disk) > >20: None 00.0: 11300 Partition > [Created at block.357] > UDI: /org/freedesktop/Hal/devices/volume_part2_size_2154888704 > Unique ID: U2bc.SE1wIdpsiiC > Parent ID: _q_W._tDc13tMzFD > SysFS ID: /block/sda/sda2 > Hardware Class: partition > Model: "Partition" > Device File: /dev/sda2 > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #18 (Disk) > >21: None 00.0: 11300 Partition > [Created at block.357] > UDI: /org/freedesktop/Hal/devices/volume_uuid_cc0603a8_d983_4b15_8817_54962567c2a1 > Unique ID: xDrg.SE1wIdpsiiC > Parent ID: _q_W._tDc13tMzFD > SysFS ID: /block/sda/sda3 > Hardware Class: partition > Model: "Partition" > Device File: /dev/sda3 > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #18 (Disk) > >22: None 00.0: 11300 Partition > [Created at block.357] > UDI: /org/freedesktop/Hal/devices/volume_uuid_87a57e02_6212_4fed_9640_7fc79d4c82f3 > Unique ID: OP5l.SE1wIdpsiiC > Parent ID: _q_W._tDc13tMzFD > SysFS ID: /block/sda/sda4 > Hardware Class: partition > Model: "Partition" > Device File: /dev/sda4 > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #18 (Disk) > >23: USB 00.0: 10a00 Hub > [Created at usb.122] > UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_2_if0 > Unique ID: k4bc.JGTS_63628C > Parent ID: e6j0.RsvbES4Pp54 > SysFS ID: /devices/pci0000:00/0000:00:01.2/usb1/1-0:1.0 > SysFS BusID: 1-0:1.0 > Hardware Class: hub > Model: "Linux 2.6.13-11-default ehci_hcd EHCI Host Controller" > Hotplug: USB > Vendor: "Linux 2.6.13-11-default ehci_hcd" > Device: "EHCI Host Controller" > Revision: "2.06" > Serial ID: "0000:00:01.2" > Driver: "hub" > Speed: 480 Mbps > Module Alias: "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*" > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #10 (USB Controller) > >24: USB 00.0: 10a00 Hub > [Created at usb.122] > UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_0_if0 > Unique ID: pBe4.rzvp3S1Gb95 > Parent ID: vSkL.K7e_HsnvX9F > SysFS ID: /devices/pci0000:00/0000:00:01.0/usb2/2-0:1.0 > SysFS BusID: 2-0:1.0 > Hardware Class: hub > Model: "Linux 2.6.13-11-default ohci_hcd OHCI Host Controller" > Hotplug: USB > Vendor: "Linux 2.6.13-11-default ohci_hcd" > Device: "OHCI Host Controller" > Revision: "2.06" > Serial ID: "0000:00:01.0" > Driver: "hub" > Speed: 12 Mbps > Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*" > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #8 (USB Controller) > >25: USB 00.0: 10a00 Hub > [Created at usb.122] > UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_01_1_if0 > Unique ID: uIhY.ci_ORCqzXRC > Parent ID: mnDB.K7e_HsnvX9F > SysFS ID: /devices/pci0000:00/0000:00:01.1/usb3/3-0:1.0 > SysFS BusID: 3-0:1.0 > Hardware Class: hub > Model: "Linux 2.6.13-11-default ohci_hcd OHCI Host Controller" > Hotplug: USB > Vendor: "Linux 2.6.13-11-default ohci_hcd" > Device: "OHCI Host Controller" > Revision: "2.06" > Serial ID: "0000:00:01.1" > Driver: "hub" > Speed: 12 Mbps > Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*" > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #9 (USB Controller) > >26: None 00.0: 10103 CPU > [Created at cpu.421] > Unique ID: rdCR.j8NaKXDZtZ6 > Hardware Class: cpu > Arch: IA-64 > Vendor: "GenuineIntel" > Model: 0.0.5 "Itanium 2" > Features: branchlong > Clock: 1000 MHz > Config Status: cfg=new, avail=yes, need=no, active=unknown > >27: None 01.0: 10103 CPU > [Created at cpu.421] > Unique ID: wkFv.j8NaKXDZtZ6 > Hardware Class: cpu > Arch: IA-64 > Vendor: "GenuineIntel" > Model: 0.0.5 "Itanium 2" > Features: branchlong > Clock: 1000 MHz > Config Status: cfg=new, avail=yes, need=no, active=unknown > >28: Serial 00.0: 10801 Console > [Created at kbd.159] > Unique ID: Fyby.5lXXuQkv_C5 > Hardware Class: keyboard > Model: "serial console" > Device: "serial console" > Device File: /dev/ttyS0 > Config Status: cfg=new, avail=yes, need=no, active=unknown > >29: None 00.0: 10701 Ethernet > [Created at net.111] > UDI: /org/freedesktop/Hal/devices/net_00_30_6e_4c_25_a4 > Unique ID: usDW.ndpeucax6V1 > Parent ID: rBUF.6SbwVcFLQRE > SysFS ID: /class/net/eth0 > SysFS Device Link: /devices/pci0000:00/0000:00:03.0 > Hardware Class: network interface > Model: "Ethernet network interface" > Driver: "e100" > Device File: eth0 > HW Address: 00:30:6e:4c:25:a4 > Link detected: yes > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #12 (Ethernet controller) > >30: None 01.0: 10701 Ethernet > [Created at net.111] > UDI: /org/freedesktop/Hal/devices/net_00_30_6e_4c_25_a5 > Unique ID: L2Ua.ndpeucax6V1 > Parent ID: JNkJ.GkJQjXPjWl4 > SysFS ID: /class/net/eth1 > SysFS Device Link: /devices/pci0000:20/0000:20:02.0 > Hardware Class: network interface > Model: "Ethernet network interface" > Driver: "tg3" > Device File: eth1 > HW Address: 00:30:6e:4c:25:a5 > Link detected: no > Config Status: cfg=new, avail=yes, need=no, active=unknown > Attached to: #15 (Ethernet controller) > >31: None 00.0: 10700 Loopback > [Created at net.111] > Unique ID: ZsBS.GQNx7L4uPNA > SysFS ID: /class/net/lo > Hardware Class: network interface > Model: "Loopback network interface" > Device File: lo > Link detected: yes > Config Status: cfg=new, avail=yes, need=no, active=unknown
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 116739
:
49911
|
49912
|
49914
|
49985
| 49986