Attachment 50003 Details for Bug 114017

/var/log/messages

messages (text/plain), 28.95 KB, created by Ulrich Lange on 2005-09-15 09:31:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ulrich Lange

Created: 2005-09-15 09:31:52 UTC

Size: 28.95 KB

patch

obsolete

>Sep 15 16:46:18 ULNZ init: Switching to runlevel: 0
>Sep 15 16:46:19 ULNZ kernel: bootsplash: status on console 0 changed to on
>Sep 15 16:46:19 ULNZ kernel: bootsplash: status on console 0 changed to on
>Sep 15 16:46:21 ULNZ kernel: bootsplash: status on console 0 changed to on
>Sep 15 16:46:22 ULNZ sshd[5217]: Received signal 15; terminating.
>Sep 15 16:46:23 ULNZ kernel: Kernel logging (proc) stopped.
>Sep 15 16:46:23 ULNZ kernel: Kernel log daemon terminating.
>Sep 15 16:46:25 ULNZ syslog-ng[4253]: syslog-ng version 1.6.8 going down
>Sep 15 16:47:54 ULNZ syslog-ng[4244]: syslog-ng version 1.6.8 starting
>Sep 15 16:47:54 ULNZ syslog-ng[4244]: Changing permissions on special file /dev/xconsole
>Sep 15 16:47:54 ULNZ syslog-ng[4244]: Changing permissions on special file /dev/tty10
>Sep 15 16:47:54 ULNZ ifup: No configuration found for sit0
>Sep 15 16:47:59 ULNZ kernel: klogd 1.4.1, log source = /proc/kmsg started.
>Sep 15 16:47:59 ULNZ kernel: parport: PnPBIOS parport detected.
>Sep 15 16:47:59 ULNZ kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>Sep 15 16:47:59 ULNZ kernel: lp0: using parport0 (interrupt-driven).
>Sep 15 16:47:59 ULNZ kernel: NET: Registered protocol family 10
>Sep 15 16:47:59 ULNZ kernel: Disabled Privacy Extensions on device c036b920(lo)
>Sep 15 16:47:59 ULNZ kernel: IPv6 over IPv4 tunneling driver
>Sep 15 16:47:59 ULNZ kernel: ip6_tables: (C) 2000-2002 Netfilter core team
>Sep 15 16:47:59 ULNZ kernel: Linux agpgart interface v0.101 (c) Dave Jones
>Sep 15 16:47:59 ULNZ kernel: agpgart: Detected an Intel 830M Chipset.
>Sep 15 16:47:59 ULNZ kernel: agpgart: AGP aperture is 256M @ 0xe0000000
>Sep 15 16:47:59 ULNZ kernel: usbcore: registered new driver usbfs
>Sep 15 16:47:59 ULNZ kernel: usbcore: registered new driver hub
>Sep 15 16:47:59 ULNZ kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Sep 15 16:47:59 ULNZ kernel: ip_tables: (C) 2000-2002 Netfilter core team
>Sep 15 16:47:59 ULNZ kernel: hw_random hardware driver 1.0.0 loaded
>Sep 15 16:47:59 ULNZ kernel: ip_conntrack version 2.1 (6139 buckets, 49112 max) - 248 bytes per conntrack
>Sep 15 16:47:59 ULNZ kernel: USB Universal Host Controller Interface driver v2.3
>Sep 15 16:47:59 ULNZ kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 16:47:59 ULNZ kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
>Sep 15 16:47:59 ULNZ kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Sep 15 16:47:59 ULNZ kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>Sep 15 16:47:59 ULNZ kernel: uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>Sep 15 16:47:59 ULNZ kernel: hub 1-0:1.0: USB hub found
>Sep 15 16:47:59 ULNZ kernel: hub 1-0:1.0: 2 ports detected
>Sep 15 16:47:59 ULNZ kernel: shpchp: shpc_init : shpc_cap_offset == 0
>Sep 15 16:47:59 ULNZ kernel: shpchp: shpc_init : shpc_cap_offset == 0
>Sep 15 16:47:59 ULNZ kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Sep 15 16:47:59 ULNZ kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
>Sep 15 16:47:59 ULNZ kernel:     ACPI-0212: *** Warning: Device is not power manageable
>Sep 15 16:47:59 ULNZ kernel: PCI: Enabling device 0000:02:03.0 (0000 -> 0001)
>Sep 15 16:47:59 ULNZ kernel: ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>Sep 15 16:47:59 ULNZ kernel: e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
>Sep 15 16:47:59 ULNZ kernel: e100: Copyright(c) 1999-2005 Intel Corporation
>Sep 15 16:47:59 ULNZ kernel:     ACPI-0212: *** Warning: Device is not power manageable
>Sep 15 16:47:59 ULNZ kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>Sep 15 16:47:59 ULNZ kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 16:47:59 ULNZ kernel: e100: eth0: e100_probe: addr 0xd0200000, irq 10, MAC addr 00:C0:9F:05:D0:38
>Sep 15 16:47:59 ULNZ kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 16:47:59 ULNZ kernel: Yenta: CardBus bridge found at 0000:02:05.0 [103c:001a]
>Sep 15 16:47:59 ULNZ kernel: Yenta: Enabling burst memory read transactions
>Sep 15 16:47:59 ULNZ kernel: Yenta: Using INTVAL to route CSC interrupts to PCI
>Sep 15 16:47:59 ULNZ kernel: Yenta: Routing CardBus interrupts to PCI
>Sep 15 16:47:59 ULNZ kernel: Yenta TI: socket 0000:02:05.0, mfunc 0x012c1272, devctl 0x66
>Sep 15 16:47:59 ULNZ kernel: usbcore: registered new driver hiddev
>Sep 15 16:47:59 ULNZ kernel: hiddev96: USB HID v1.00 Device [Lexmark  4200 Series] on usb-0000:00:1d.0-2
>Sep 15 16:47:59 ULNZ kernel: usbcore: registered new driver usbhid
>Sep 15 16:47:59 ULNZ kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>Sep 15 16:47:59 ULNZ kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x043D pid 0x008A
>Sep 15 16:47:59 ULNZ kernel: usbcore: registered new driver usblp
>Sep 15 16:47:59 ULNZ kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>Sep 15 16:47:59 ULNZ kernel: Yenta: ISA IRQ mask 0x0818, PCI irq 10
>Sep 15 16:47:59 ULNZ kernel: Socket status: 30000006
>Sep 15 16:47:59 ULNZ kernel: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0x3000-0x3fff: clean.
>Sep 15 16:47:59 ULNZ kernel: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>Sep 15 16:47:59 ULNZ kernel: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>Sep 15 16:47:59 ULNZ kernel: ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 16:47:59 ULNZ kernel: Yenta: CardBus bridge found at 0000:02:05.1 [103c:001a]
>Sep 15 16:47:59 ULNZ kernel: Yenta: Using INTVAL to route CSC interrupts to PCI
>Sep 15 16:47:59 ULNZ kernel: Yenta: Routing CardBus interrupts to PCI
>Sep 15 16:47:59 ULNZ kernel: Yenta TI: socket 0000:02:05.1, mfunc 0x012c1272, devctl 0x66
>Sep 15 16:47:59 ULNZ kernel: Yenta: ISA IRQ mask 0x0818, PCI irq 10
>Sep 15 16:47:59 ULNZ kernel: Socket status: 30000006
>Sep 15 16:47:59 ULNZ kernel: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0x3000-0x3fff: clean.
>Sep 15 16:47:59 ULNZ kernel: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>Sep 15 16:47:59 ULNZ kernel: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0xc00-0xcff: clean.
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0x820-0x8ff: clean.
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0xa00-0xaff: clean.
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0xc00-0xcff: clean.
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0x820-0x8ff: clean.
>Sep 15 16:47:59 ULNZ kernel: cs: IO port probe 0xa00-0xaff: clean.
>Sep 15 16:47:59 ULNZ kernel: bootsplash: status on console 0 changed to on
>Sep 15 16:47:59 ULNZ kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>Sep 15 16:47:59 ULNZ kernel: NET: Registered protocol family 17
>Sep 15 16:47:59 ULNZ kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Sep 15 16:48:00 ULNZ modify_resolvconf: Service dhcpcd modified /etc/resolv.conf. See info block in this file
>Sep 15 16:48:00 ULNZ SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>Sep 15 16:48:00 ULNZ SuSEfirewall2: /var/lock/SuSEfirewall2.booting exists which means system boot in progress, exit.
>Sep 15 16:48:01 ULNZ mDNSResponder (Engineering Build) (Sep  5 2005 22:27:50) [4849]: starting
>Sep 15 16:48:01 ULNZ kernel: ACPI: AC Adapter [ACAD] (on-line)
>Sep 15 16:48:01 ULNZ kernel: ACPI: Battery Slot [BAT1] (battery present)
>Sep 15 16:48:01 ULNZ kernel: ACPI: Battery Slot [BAT2] (battery absent)
>Sep 15 16:48:01 ULNZ kernel: ACPI: Power Button (FF) [PWRF]
>Sep 15 16:48:01 ULNZ kernel: ACPI: Lid Switch [LID]
>Sep 15 16:48:01 ULNZ kernel: ACPI: Sleep Button (CM) [SLP]
>Sep 15 16:48:01 ULNZ modprobe: FATAL: Module # not found.
>Sep 15 16:48:01 ULNZ modprobe: FATAL: Module # not found.
>Sep 15 16:48:02 ULNZ /usr/sbin/cron[4996]: (CRON) STARTUP (V5.0)
>Sep 15 16:48:03 ULNZ kernel: IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>Sep 15 16:48:04 ULNZ kernel: microcode: CPU0 already at revision 0x1d (current=0x1d)
>Sep 15 16:48:04 ULNZ kernel: microcode: No new microcode data for CPU0
>Sep 15 16:48:04 ULNZ kernel: IA-32 Microcode Update Driver v1.14 unregistered
>Sep 15 16:48:04 ULNZ kernel: bootsplash: status on console 0 changed to on
>Sep 15 16:48:06 ULNZ kernel: eth0: no IPv6 routers present
>Sep 15 16:48:06 ULNZ rcpowersaved: enter 'speedstep_ich' into CPUFREQD_MODULE in /etc/sysconfig/powersave/cpufreq.
>Sep 15 16:48:06 ULNZ rcpowersaved: this will speed up starting powersaved and avoid unnecessary warnings in syslog.
>Sep 15 16:48:06 ULNZ sshd[5206]: Server listening on :: port 22.
>Sep 15 16:48:06 ULNZ [powersave]: ERROR (CPUFreq_Kernel:21) Can not set ondemand governor, maybe your cpufreq driver is too slow.
>Sep 15 16:48:06 ULNZ [powersave]: ERROR (CPUFreq_Kernel:23) Try CPUFREQ_CONTROL=userspace in /etc/sysconfig/powersave/cpufreq.
>Sep 15 16:48:06 ULNZ [powersave]: WARNING (setConfig:126) Problems with ondemand governor, could not write up_threshold.
>Sep 15 16:48:07 ULNZ [powersave]: WARNING (setMode:145) Could not set on_demand governor. Isthe module loaded?
>Sep 15 16:48:08 ULNZ SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>Sep 15 16:48:08 ULNZ SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
>Sep 15 16:48:08 ULNZ SuSEfirewall2: batch committing...
>Sep 15 16:48:11 ULNZ SuSEfirewall2: Firewall rules successfully set
>Sep 15 16:48:11 ULNZ kernel: bootsplash: status on console 0 changed to on
>Sep 15 16:48:11 ULNZ kernel: bootsplash: status on console 0 changed to on
>Sep 15 16:48:30 ULNZ hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
>Sep 15 17:37:53 ULNZ modprobe: FATAL: Error inserting sonypi (/lib/modules/2.6.13-9-default/kernel/drivers/char/sonypi.ko): No such device
>Sep 15 17:41:29 ULNZ kernel: uhci_hcd 0000:00:1d.0: remove, state 1
>Sep 15 17:41:29 ULNZ kernel: usb usb1: USB disconnect, address 1
>Sep 15 17:41:29 ULNZ kernel: usb 1-2: USB disconnect, address 2
>Sep 15 17:41:29 ULNZ kernel: drivers/usb/class/usblp.c: usblp0: removed
>Sep 15 17:41:29 ULNZ kernel: uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
>Sep 15 17:41:29 ULNZ kernel: ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Sep 15 17:42:46 ULNZ kernel: Stopping tasks: ======================================================================|
>Sep 15 17:42:47 ULNZ kernel: Freeing memory...  -\|/-\done (77944 pages freed)
>Sep 15 17:42:47 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:08.0 disabled
>Sep 15 17:42:47 ULNZ kernel:     ACPI-0212: *** Warning: Device is not power manageable
>Sep 15 17:42:47 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:05.1 disabled
>Sep 15 17:42:47 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:05.0 disabled
>Sep 15 17:42:47 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:03.0 disabled
>Sep 15 17:42:47 ULNZ kernel: swsusp: Need to copy 12674 pages
>Sep 15 17:42:47 ULNZ kernel: swsusp: Restoring Highmem
>Sep 15 17:42:47 ULNZ kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
>Sep 15 17:42:47 ULNZ kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>Sep 15 17:42:47 ULNZ kernel: ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>Sep 15 17:42:47 ULNZ kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 17:42:48 ULNZ kernel: ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 17:42:48 ULNZ kernel:     ACPI-0212: *** Warning: Device is not power manageable
>Sep 15 17:42:48 ULNZ kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>Sep 15 17:42:48 ULNZ kernel: Restarting tasks... done
>Sep 15 17:42:50 ULNZ [powersave]: ERROR (filter_function:239) Received error message: org.freedesktop.DBus.Error.ServiceUnknown
>Sep 15 17:42:54 ULNZ kernel: USB Universal Host Controller Interface driver v2.3
>Sep 15 17:42:54 ULNZ kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 17:42:54 ULNZ kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
>Sep 15 17:42:54 ULNZ kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Sep 15 17:42:54 ULNZ kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>Sep 15 17:42:54 ULNZ kernel: uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>Sep 15 17:42:54 ULNZ kernel: hub 1-0:1.0: USB hub found
>Sep 15 17:42:54 ULNZ kernel: hub 1-0:1.0: 2 ports detected
>Sep 15 17:42:54 ULNZ kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
>Sep 15 17:42:54 ULNZ kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x043D pid 0x008A
>Sep 15 17:42:54 ULNZ kernel: hiddev96: USB HID v1.00 Device [Lexmark  4200 Series] on usb-0000:00:1d.0-2
>Sep 15 17:44:04 ULNZ kernel: uhci_hcd 0000:00:1d.0: remove, state 1
>Sep 15 17:44:04 ULNZ kernel: usb usb1: USB disconnect, address 1
>Sep 15 17:44:04 ULNZ kernel: usb 1-2: USB disconnect, address 2
>Sep 15 17:44:04 ULNZ kernel: drivers/usb/class/usblp.c: usblp0: removed
>Sep 15 17:44:04 ULNZ kernel: uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
>Sep 15 17:44:04 ULNZ kernel: ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Sep 15 17:45:30 ULNZ kernel: Stopping tasks: ===================================================================|
>Sep 15 17:45:30 ULNZ kernel: Freeing memory...  -done (10394 pages freed)
>Sep 15 17:45:30 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:08.0 disabled
>Sep 15 17:45:30 ULNZ kernel:     ACPI-0212: *** Warning: Device is not power manageable
>Sep 15 17:45:30 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:05.1 disabled
>Sep 15 17:45:30 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:05.0 disabled
>Sep 15 17:45:30 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:03.0 disabled
>Sep 15 17:45:30 ULNZ kernel: swsusp: Need to copy 22206 pages
>Sep 15 17:45:30 ULNZ kernel: swsusp: Restoring Highmem
>Sep 15 17:45:30 ULNZ kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
>Sep 15 17:45:30 ULNZ kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>Sep 15 17:45:30 ULNZ kernel: ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>Sep 15 17:45:30 ULNZ kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 17:45:31 ULNZ [powersave]: ERROR (filter_function:239) Received error message: org.freedesktop.DBus.Error.ServiceUnknown
>Sep 15 17:45:31 ULNZ kernel: ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 17:45:31 ULNZ kernel:     ACPI-0212: *** Warning: Device is not power manageable
>Sep 15 17:45:31 ULNZ kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>Sep 15 17:45:31 ULNZ kernel: Restarting tasks... done
>Sep 15 17:45:32 ULNZ kernel: USB Universal Host Controller Interface driver v2.3
>Sep 15 17:45:32 ULNZ kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 17:45:32 ULNZ kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
>Sep 15 17:45:32 ULNZ kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Sep 15 17:45:32 ULNZ kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>Sep 15 17:45:32 ULNZ kernel: uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>Sep 15 17:45:32 ULNZ kernel: hub 1-0:1.0: USB hub found
>Sep 15 17:45:32 ULNZ kernel: hub 1-0:1.0: 2 ports detected
>Sep 15 17:45:32 ULNZ kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
>Sep 15 17:45:32 ULNZ kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x043D pid 0x008A
>Sep 15 17:45:32 ULNZ kernel: hiddev96: USB HID v1.00 Device [Lexmark  4200 Series] on usb-0000:00:1d.0-2
>Sep 15 17:46:22 ULNZ kernel: uhci_hcd 0000:00:1d.0: remove, state 1
>Sep 15 17:46:22 ULNZ kernel: usb usb1: USB disconnect, address 1
>Sep 15 17:46:22 ULNZ kernel: usb 1-2: USB disconnect, address 2
>Sep 15 17:46:22 ULNZ kernel: drivers/usb/class/usblp.c: usblp0: removed
>Sep 15 17:46:22 ULNZ kernel: uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
>Sep 15 17:46:22 ULNZ kernel: ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>Sep 15 17:47:48 ULNZ kernel: Stopping tasks: ====================================================================|
>Sep 15 17:47:50 ULNZ kernel: Freeing memory...  -\|done (16331 pages freed)
>Sep 15 17:47:50 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:08.0 disabled
>Sep 15 17:47:50 ULNZ kernel:     ACPI-0212: *** Warning: Device is not power manageable
>Sep 15 17:47:50 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:05.1 disabled
>Sep 15 17:47:50 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:05.0 disabled
>Sep 15 17:47:50 ULNZ kernel: ACPI: PCI interrupt for device 0000:02:03.0 disabled
>Sep 15 17:47:50 ULNZ kernel: swsusp: Need to copy 9378 pages
>Sep 15 17:47:50 ULNZ kernel: swsusp: Restoring Highmem
>Sep 15 17:47:50 ULNZ kernel: PCI: Setting latency timer of device 0000:00:1e.0 to 64
>Sep 15 17:47:50 ULNZ kernel: ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>Sep 15 17:47:50 ULNZ kernel: ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>Sep 15 17:47:51 ULNZ kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 17:47:51 ULNZ kernel: ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 17:47:52 ULNZ kernel:     ACPI-0212: *** Warning: Device is not power manageable
>Sep 15 17:47:52 ULNZ kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>Sep 15 17:47:52 ULNZ kernel: Restarting tasks... done
>Sep 15 17:47:54 ULNZ syslog-ng[4244]: STATS: dropped 0
>Sep 15 17:47:59 ULNZ [powersave]: ERROR (filter_function:239) Received error message: org.freedesktop.DBus.Error.ServiceUnknown
>Sep 15 17:48:01 ULNZ kernel: USB Universal Host Controller Interface driver v2.3
>Sep 15 17:48:01 ULNZ kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 17:48:01 ULNZ kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
>Sep 15 17:48:01 ULNZ kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Sep 15 17:48:01 ULNZ kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>Sep 15 17:48:01 ULNZ kernel: uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>Sep 15 17:48:01 ULNZ kernel: hub 1-0:1.0: USB hub found
>Sep 15 17:48:01 ULNZ kernel: hub 1-0:1.0: 2 ports detected
>Sep 15 17:48:01 ULNZ kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
>Sep 15 17:48:01 ULNZ kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x043D pid 0x008A
>Sep 15 17:48:01 ULNZ kernel: hiddev96: USB HID v1.00 Device [Lexmark  4200 Series] on usb-0000:00:1d.0-2
>Sep 15 17:48:31 ULNZ kernel: uhci_hcd 0000:00:1d.0: remove, state 1
>Sep 15 17:48:31 ULNZ kernel: usb usb1: USB disconnect, address 1
>Sep 15 17:48:31 ULNZ kernel: usb 1-2: USB disconnect, address 2
>Sep 15 17:48:31 ULNZ kernel: drivers/usb/class/usblp.c: usblp0: removed
>Sep 15 17:48:31 ULNZ kernel: uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
>Sep 15 17:48:31 ULNZ kernel: ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>### ---> Cold Start after Crash
>Sep 15 18:04:27 ULNZ syslog-ng[4314]: syslog-ng version 1.6.8 starting
>Sep 15 18:04:28 ULNZ syslog-ng[4314]: Changing permissions on special file /dev/xconsole
>Sep 15 18:04:28 ULNZ syslog-ng[4314]: Changing permissions on special file /dev/tty10
>Sep 15 18:04:28 ULNZ ifup: No configuration found for sit0
>Sep 15 18:04:32 ULNZ kernel: klogd 1.4.1, log source = /proc/kmsg started.
>Sep 15 18:04:32 ULNZ kernel: parport: PnPBIOS parport detected.
>Sep 15 18:04:32 ULNZ kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>Sep 15 18:04:32 ULNZ kernel: lp0: using parport0 (interrupt-driven).
>Sep 15 18:04:32 ULNZ kernel: NET: Registered protocol family 10
>Sep 15 18:04:32 ULNZ kernel: Disabled Privacy Extensions on device c036b920(lo)
>Sep 15 18:04:32 ULNZ kernel: IPv6 over IPv4 tunneling driver
>Sep 15 18:04:32 ULNZ kernel: ip6_tables: (C) 2000-2002 Netfilter core team
>Sep 15 18:04:32 ULNZ kernel: usbcore: registered new driver usbfs
>Sep 15 18:04:32 ULNZ kernel: usbcore: registered new driver hub
>Sep 15 18:04:32 ULNZ kernel: USB Universal Host Controller Interface driver v2.3
>Sep 15 18:04:32 ULNZ kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 18:04:32 ULNZ kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64
>Sep 15 18:04:32 ULNZ kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
>Sep 15 18:04:32 ULNZ kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>Sep 15 18:04:32 ULNZ kernel: uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>Sep 15 18:04:32 ULNZ kernel: hub 1-0:1.0: USB hub found
>Sep 15 18:04:32 ULNZ kernel: hub 1-0:1.0: 2 ports detected
>Sep 15 18:04:32 ULNZ kernel: Linux agpgart interface v0.101 (c) Dave Jones
>Sep 15 18:04:32 ULNZ kernel: agpgart: Detected an Intel 830M Chipset.
>Sep 15 18:04:32 ULNZ kernel: agpgart: AGP aperture is 256M @ 0xe0000000
>Sep 15 18:04:32 ULNZ kernel: hw_random hardware driver 1.0.0 loaded
>Sep 15 18:04:32 ULNZ kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Sep 15 18:04:32 ULNZ kernel: shpchp: shpc_init : shpc_cap_offset == 0
>Sep 15 18:04:32 ULNZ kernel: shpchp: shpc_init : shpc_cap_offset == 0
>Sep 15 18:04:32 ULNZ kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Sep 15 18:04:32 ULNZ kernel: usb 1-2: new full speed USB device using uhci_hcd and address 2
>Sep 15 18:04:32 ULNZ kernel: ip_tables: (C) 2000-2002 Netfilter core team
>Sep 15 18:04:32 ULNZ kernel: ip_conntrack version 2.1 (6139 buckets, 49112 max) - 248 bytes per conntrack
>Sep 15 18:04:32 ULNZ kernel: ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 18:04:32 ULNZ kernel: Yenta: CardBus bridge found at 0000:02:05.0 [103c:001a]
>Sep 15 18:04:32 ULNZ kernel: Yenta: Enabling burst memory read transactions
>Sep 15 18:04:32 ULNZ kernel: Yenta: Using INTVAL to route CSC interrupts to PCI
>Sep 15 18:04:32 ULNZ kernel: Yenta: Routing CardBus interrupts to PCI
>Sep 15 18:04:32 ULNZ kernel: Yenta TI: socket 0000:02:05.0, mfunc 0x012c1272, devctl 0x66
>Sep 15 18:04:32 ULNZ kernel: e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
>Sep 15 18:04:32 ULNZ kernel: e100: Copyright(c) 1999-2005 Intel Corporation
>Sep 15 18:04:32 ULNZ kernel: Yenta: ISA IRQ mask 0x0818, PCI irq 10
>Sep 15 18:04:32 ULNZ kernel: Socket status: 30000006
>Sep 15 18:04:32 ULNZ kernel: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0x3000-0x3fff: clean.
>Sep 15 18:04:32 ULNZ kernel: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>Sep 15 18:04:32 ULNZ kernel: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>Sep 15 18:04:32 ULNZ kernel: ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 18:04:32 ULNZ kernel: Yenta: CardBus bridge found at 0000:02:05.1 [103c:001a]
>Sep 15 18:04:32 ULNZ kernel: Yenta: Using INTVAL to route CSC interrupts to PCI
>Sep 15 18:04:32 ULNZ kernel: Yenta: Routing CardBus interrupts to PCI
>Sep 15 18:04:32 ULNZ kernel: Yenta TI: socket 0000:02:05.1, mfunc 0x012c1272, devctl 0x66
>Sep 15 18:04:32 ULNZ kernel:     ACPI-0212: *** Warning: Device is not power manageable
>Sep 15 18:04:32 ULNZ kernel: PCI: Enabling device 0000:02:03.0 (0000 -> 0001)
>Sep 15 18:04:32 ULNZ kernel: ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>Sep 15 18:04:32 ULNZ kernel: Yenta: ISA IRQ mask 0x0818, PCI irq 10
>Sep 15 18:04:32 ULNZ kernel: Socket status: 30000006
>Sep 15 18:04:32 ULNZ kernel: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0x3000-0x3fff: clean.
>Sep 15 18:04:32 ULNZ kernel: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>Sep 15 18:04:32 ULNZ kernel: pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>Sep 15 18:04:32 ULNZ kernel:     ACPI-0212: *** Warning: Device is not power manageable
>Sep 15 18:04:32 ULNZ kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>Sep 15 18:04:32 ULNZ kernel: ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>Sep 15 18:04:32 ULNZ kernel: e100: eth0: e100_probe: addr 0xd0200000, irq 10, MAC addr 00:C0:9F:05:D0:38
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0xc00-0xcff: clean.
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0x820-0x8ff: clean.
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0xa00-0xaff: clean.
>Sep 15 18:04:32 ULNZ kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x043D pid 0x008A
>Sep 15 18:04:32 ULNZ kernel: usbcore: registered new driver usblp
>Sep 15 18:04:32 ULNZ kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>Sep 15 18:04:32 ULNZ kernel: usbcore: registered new driver hiddev
>Sep 15 18:04:32 ULNZ kernel: hiddev96: USB HID v1.00 Device [Lexmark  4200 Series] on usb-0000:00:1d.0-2
>Sep 15 18:04:32 ULNZ kernel: usbcore: registered new driver usbhid
>Sep 15 18:04:32 ULNZ kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0xc00-0xcff: clean.
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0x820-0x8ff: clean.
>Sep 15 18:04:32 ULNZ kernel: cs: IO port probe 0xa00-0xaff: clean.
>Sep 15 18:04:32 ULNZ kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>Sep 15 18:04:32 ULNZ kernel: NET: Registered protocol family 17
>Sep 15 18:04:32 ULNZ kernel: BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Sep 15 18:04:32 ULNZ modify_resolvconf: Service dhcpcd modified /etc/resolv.conf. See info block in this file
>Sep 15 18:04:33 ULNZ SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>Sep 15 18:04:33 ULNZ SuSEfirewall2: /var/lock/SuSEfirewall2.booting exists which means system boot in progress, exit.
>Sep 15 18:04:33 ULNZ mDNSResponder (Engineering Build) (Sep  5 2005 22:27:50) [4862]: starting
>Sep 15 18:04:34 ULNZ kernel: IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>Sep 15 18:04:34 ULNZ kernel: microcode: CPU0 already at revision 0x1d (current=0x1d)
>Sep 15 18:04:34 ULNZ kernel: microcode: No new microcode data for CPU0
>Sep 15 18:04:34 ULNZ kernel: ACPI: AC Adapter [ACAD] (on-line)
>Sep 15 18:04:34 ULNZ kernel: ACPI: Battery Slot [BAT1] (battery present)
>Sep 15 18:04:34 ULNZ kernel: ACPI: Battery Slot [BAT2] (battery absent)
>Sep 15 18:04:34 ULNZ kernel: ACPI: Power Button (FF) [PWRF]
>Sep 15 18:04:34 ULNZ kernel: ACPI: Lid Switch [LID]
>Sep 15 18:04:34 ULNZ kernel: ACPI: Sleep Button (CM) [SLP]
>Sep 15 18:04:34 ULNZ kernel: IA-32 Microcode Update Driver v1.14 unregistered
>Sep 15 18:04:35 ULNZ sshd[5042]: Server listening on :: port 22.
>Sep 15 18:04:34 ULNZ modprobe: FATAL: Module # not found.
>Sep 15 18:04:35 ULNZ modprobe: FATAL: Module # not found.
>Sep 15 18:04:35 ULNZ /usr/sbin/cron[5124]: (CRON) STARTUP (V5.0)
>Sep 15 18:04:37 ULNZ rcpowersaved: enter 'speedstep_ich' into CPUFREQD_MODULE in /etc/sysconfig/powersave/cpufreq.
>Sep 15 18:04:37 ULNZ rcpowersaved: this will speed up starting powersaved and avoid unnecessary warnings in syslog.
>Sep 15 18:04:39 ULNZ kernel: eth0: no IPv6 routers present
>Sep 15 18:04:39 ULNZ [powersave]: ERROR (CPUFreq_Kernel:21) Can not set ondemand governor, maybe your cpufreq driver is too slow.
>Sep 15 18:04:39 ULNZ [powersave]: ERROR (CPUFreq_Kernel:23) Try CPUFREQ_CONTROL=userspace in /etc/sysconfig/powersave/cpufreq.
>Sep 15 18:04:39 ULNZ [powersave]: WARNING (setConfig:126) Problems with ondemand governor, could not write up_threshold.
>Sep 15 18:04:40 ULNZ [powersave]: WARNING (setMode:145) Could not set on_demand governor. Isthe module loaded?
>Sep 15 18:04:42 ULNZ SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled.
>Sep 15 18:04:42 ULNZ SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
>Sep 15 18:04:42 ULNZ SuSEfirewall2: batch committing...
>Sep 15 18:04:44 ULNZ SuSEfirewall2: Firewall rules successfully set
>Sep 15 18:04:44 ULNZ kernel: bootsplash: status on console 0 changed to on
>Sep 15 18:05:09 ULNZ hp: unable to open /var/run/hpiod.port: No such file or directory: prnt/hpijs/hplip_api.c 75
>Sep 15 18:05:14 ULNZ modprobe: FATAL: Error inserting sonypi (/lib/modules/2.6.13-9-default/kernel/drivers/char/sonypi.ko): No such device

Actions: View

Attachments on bug 114017: 48084 | 49540 | 50002 | 50003 | 50004 | 50005 | 50006 | 50007