Attachment 50601 Details for Bug 115124

dmseg

dmseg.txt (text/plain), 15.79 KB, created by Ulrich Lange on 2005-09-22 02:21:30 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ulrich Lange

Created: 2005-09-22 02:21:30 UTC

Size: 15.79 KB

patch

obsolete

>Linux version 2.6.13-20050905_bug115118-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Sun Sep 4 23:27:47 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002ff60000 (usable)
> BIOS-e820: 000000002ff60000 - 000000002ff73c00 (ACPI data)
> BIOS-e820: 000000002ff73c00 - 000000002ff80000 (ACPI NVS)
> BIOS-e820: 000000002ff80000 - 0000000030000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>767MB LOWMEM available.
>On node 0 totalpages: 196448
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 192352 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6610
>ACPI: RSDT (v001 PTLTD  EBRSDT   0x02200000  LTP 0x00000000) @ 0x2ff682e4
>ACPI: FADT (v001 QUANTA EBmador  0x02200000 RT2  0x00000001) @ 0x2ff73b64
>ACPI: BOOT (v001 PTLTD  EBBFTBL$ 0x02200000  LTP 0x00000001) @ 0x2ff73bd8
>ACPI: DSDT (v001 HP-MCD EB DSDT  0x02200000 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: local apic disabled
>Allocating PCI resources starting at 30000000 (gap: 30000000:cfb80000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda2 vga=0x317 selinux=0    resume=/dev/hda1  splash=silent ec_burst=0
>bootsplash: silent mode.
>ACPI: EC polling mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 996.795 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 773200k/785792k available (2028k kernel code, 12064k reserved, 700k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1995.14 BogoMIPS (lpj=3990287)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) III Mobile CPU      1000MHz stepping 01
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1714k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0420)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10) *0, disabled.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Embedded Controller [EC0] (gpe 28)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: Power Resource [PFAN] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: d0100000-d01fffff
>  PREFETCH window: d8000000-dfffffff
>PCI: Bus 3, cardbus bridge: 0000:02:05.0
>  IO window: 00004000-00004fff
>  IO window: 00005000-00005fff
>  PREFETCH window: 30000000-31ffffff
>  MEM window: 34000000-35ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:05.1
>  IO window: 00006000-00006fff
>  IO window: 00007000-00007fff
>  PREFETCH window: 32000000-33ffffff
>  MEM window: 36000000-37ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: d0200000-d02fffff
>  PREFETCH window: 30000000-33ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:02:05.0 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:02:05.1 to 64
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1127397518.292:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xd8000000, mapped to 0xf0880000, using 6144k, total 16384k
>vesafb: mode is 1024x768x16, linelength=2048, pages=9
>vesafb: protected mode interface info at c000:51d9
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>input: AT Translated Set 2 keyboard on isa0060/serio0
>ACPI wakeup devices: 
> LID  SLP USB1  HUB  LAN ESSM MPC1 MPC2 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH3M: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>ICH3M: chipset revision 1
>ICH3M: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: IC25N020ATDA04-0, ATA DISK drive
>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 39070080 sectors (20003 MB) w/1806KiB Cache, CHS=38760/16/63, UDMA(100)
>hda: cache flushes not supported
> hda: hda1 hda2
>Probing IDE interface ide1...
>hdc: UJDA340, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THRM] (33 C)
>hdc: ATAPI 24X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>ACPI: Fan [FAN] (off)
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
>ReiserFS: hda2: using ordered data mode
>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda2: checking transaction log (hda2)
>ReiserFS: hda2: Using r5 hash to sort names
>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 1052216k swap on /dev/hda1.  Priority:-1 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 830M Chipset.
>agpgart: AGP aperture is 256M @ 0xe0000000
>hw_random hardware driver 1.0.0 loaded
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>ip_tables: (C) 2000-2002 Netfilter core team
>    ACPI-0212: *** Warning: Device is not power manageable
>PCI: Enabling device 0000:02:03.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>ip_conntrack version 2.1 (6139 buckets, 49112 max) - 248 bytes per conntrack
>e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
>e100: Copyright(c) 1999-2005 Intel Corporation
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>e100: eth0: e100_probe: addr 0xd0200000, irq 10, MAC addr 00:C0:9F:05:D0:38
>ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:02:05.0 [103c:001a]
>Yenta: Enabling burst memory read transactions
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:05.0, mfunc 0x012c1272, devctl 0x66
>Yenta: ISA IRQ mask 0x0818, PCI irq 10
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>ACPI: PCI Interrupt 0000:02:05.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:02:05.1 [103c:001a]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:05.1, mfunc 0x012c1272, devctl 0x66
>Yenta: ISA IRQ mask 0x0818, PCI irq 10
>Socket status: 30000020
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x043D pid 0x008A
>usbcore: registered new driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>usbcore: registered new driver hiddev
>hiddev96: USB HID v1.00 Device [Lexmark  4200 Series] on usb-0000:00:1d.0-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: excluding 0x200-0x207
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>ohci1394: fw-host0: Unexpected PCI resource length of 1000!
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[36000000-360007ff]  Max Packet=[2048]
>bootsplash: status on console 0 changed to on
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00004c0107002d3d]
>ieee1394: Node added: ID:BUS[0-01:1023]  GUID[00d04b481208d89e]
>ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
>ieee1394: Node changed: 0-01:1023 -> 0-00:1023
>ieee1394: Node changed: 0-00:1023 -> 0-01:1023
>SCSI subsystem initialized
>sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
>scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>ieee1394: sbp2: Logged into SBP-2 device
>ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
>  Vendor: _NEC      Model: DVD+-RW ND-6500A  Rev: 2.22
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>NET: Registered protocol family 17
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLP]
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 already at revision 0x1d (current=0x1d)
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>bootsplash: status on console 0 changed to on
>eth0: no IPv6 routers present
>bootsplash: status on console 0 changed to on
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.1.1.50 DST=224.0.0.251 LEN=102 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=82 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.1.1.50 DST=224.0.0.251 LEN=102 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=82

Actions: View

Attachments on bug 115124: 48687 | 50601