Attachment 50930 Details for Bug 118997

dmesg.txt

dmesg.txt (text/plain), 13.43 KB, created by Holger Sickenberg on 2005-09-27 11:57:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Holger Sickenberg

Created: 2005-09-27 11:57:56 UTC

Size: 13.43 KB

patch

obsolete

>Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
> BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data)
> BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>255MB LOWMEM available.
>On node 0 totalpages: 65520
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 61424 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7120
>ACPI: RSDT (v001 PTLTD    RSDT   0x06041110  LTP 0x00000000) @ 0x0fff5309
>ACPI: FADT (v001 IBM    TP-A21p  0x06041110  0x00000000) @ 0x0fffeb65
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06041110  LTP 0x00000001) @ 0x0fffebd9
>ACPI: DSDT (v001 IBM    TP-A21p  0x06041110 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: local apic disabled
>Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda9 vga=0x374 selinux=0 resume=/dev/hda8 splash=0 PROFILE=work
>Initializing CPU#0
>PID hash table entries: 1024 (order: 10, 16384 bytes)
>Detected 896.774 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 254032k/262080k available (2028k kernel code, 7432k reserved, 700k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1794.76 BogoMIPS (lpj=3589535)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel Pentium III (Coppermine) stepping 0a
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1614k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0800)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: Power Resource [PSER] (on)
>ACPI: Power Resource [PSIO] (on)
>ACPI: Embedded Controller [EC] (gpe 9)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:01: ioport range 0x1000-0x103f could not be reserved
>pnp: 00:01: ioport range 0x1040-0x104f has been reserved
>pnp: 00:01: ioport range 0xfe00-0xfe0f has been reserved
>pnp: 00:08: ioport range 0x15e0-0x15ef has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: f0200000-f02fffff
>  PREFETCH window: f8000000-fbffffff
>PCI: Bus 2, cardbus bridge: 0000:00:02.0
>  IO window: 00003000-00003fff
>  IO window: 00004000-00004fff
>  PREFETCH window: 10000000-11ffffff
>  MEM window: 12000000-13ffffff
>PCI: Bus 6, cardbus bridge: 0000:00:02.1
>  IO window: 00005000-00005fff
>  IO window: 00006000-00006fff
>  PREFETCH window: 14000000-15ffffff
>  MEM window: 16000000-17ffffff
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>Simple Boot Flag at 0x35 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1127809180.392:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>Limiting direct PCI/PCI transfers.
>vesafb: framebuffer at 0xf8000000, mapped to 0xd0880000, using 15000k, total 16384k
>vesafb: mode is 1600x1200x16, linelength=3200, pages=3
>vesafb: protected mode interface info at c000:647a
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 200x75
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
> LID SLPB PCI0  USB UART 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1850-0x1857, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1858-0x185f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: IBM-DJSA-232, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 62506080 sectors (32003 MB) w/1874KiB Cache, CHS=65535/15/63, UDMA(33)
>hda: cache flushes not supported
> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > hda3
>Probing IDE interface ide1...
>input: PS/2 Generic Mouse on isa0060/serio1
>hdc: UJDA720 DVD/CDRW, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (34 C)
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 514040k swap on /dev/hda8.  Priority:-1 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
>e100: Copyright(c) 1999-2005 Intel Corporation
>ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:8C:46:1D
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0xf4000000
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 11, io base 0x00001860
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 2 ports detected
>Yenta: ISA IRQ mask 0x0438, PCI irq 11
>Socket status: 30000006
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
>usb 1-1.2: new low speed USB device using uhci_hcd and address 3
>Yenta: ISA IRQ mask 0x0438, PCI irq 11
>Socket status: 30000006
>gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1657kHz
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>piix4_smbus 0000:00:07.3: IBM Laptop detected; this module may corrupt your serial eeprom! Refusing to load module!
>piix4_smbus: probe of 0000:00:07.3 failed with error -1
>usb 1-1.1: new low speed USB device using uhci_hcd and address 4
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>NET: Registered protocol family 17
>usbcore: registered new driver hiddev
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:07.2-1.2
>input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:07.2-1.2
>input,hiddev97: USB HID v1.10 Keyboard [Logitech Desktop USB stand] on usb-0000:00:07.2-1.1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: IBM ThinkPad ACPI Extras v0.11
>ibm_acpi: http://ibm-acpi.sf.net/
>    ACPI-0077: *** Warning: No context for object [cffd6200]
>ibm_acpi: dock device not present
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>powernow: This module only works with AMD K7 CPUs
>subfs 0.9
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>subfs: unsuccessful attempt to mount media (256)
>pnp: Device 00:0c disabled.
>pnp: Device 00:0c activated.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>pnp: Device 00:0c disabled.
>pnp: Device 00:0c activated.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>SCSI subsystem initialized
>ppa: Version 2.07 (for Linux 2.4.x)
>st: Version 20050501, fixed bufsize 32768, s/g segs 256

Actions: View

Attachments on bug 118997: 50929 | 50930 | 53919 | 55992 | 61817