Attachment 51172 Details for Bug 113734

output from dmesg

dmesg (text/plain), 27.21 KB, created by Joachim Reichelt on 2005-09-29 18:35:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joachim Reichelt

Created: 2005-09-29 18:35:52 UTC

Size: 27.21 KB

patch

obsolete

>Linux version 2.6.13-9-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Wed Sep 7 08:33:36 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000f5c10
>On node 0 totalpages: 131056
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126960 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 MSISYS                                ) @ 0x000f7550
>ACPI: RSDT (v001 MSISYS MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
>ACPI: FADT (v001 MSISYS MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
>ACPI: MADT (v001 MSISYS AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff6c40
>ACPI: DSDT (v001 MSISYS AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: local apic disabled
>Intel MultiProcessor Specification v1.1
>    Virtual Wire compatibility mode.
>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
>Processor #0 15:2 APIC version 17
>I/O APIC #2 Version 17 at 0xFEC00000.
>Processors: 1
>Allocating PCI resources starting at 20000000 (gap: 20000000:dfb00000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda3 vga=0x317 selinux=0 resume=/dev/sda2 splash=silent log_buf_len=4m
>bootsplash: silent mode.
>log_buf_len: 4194304
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1992.980 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 509392k/524224k available (2028k kernel code, 14172k reserved, 700k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3989.70 BogoMIPS (lpj=7979416)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1811k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0820)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb120, last bus=2
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e8000000-e9ffffff
>  PREFETCH window: d8000000-e7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 9000-afff
>  MEM window: ea000000-ebffffff
>  PREFETCH window: 20000000-200fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1128024064.368:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 6144k, total 65536k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:ece0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>SLPB PCI0 HUB0 USB0 USB1 UAR1 UAR2 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ICH2: IDE controller at PCI slot 0000:00:1f.1
>ICH2: chipset revision 5
>ICH2: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
>hda: ST380020A, ATA DISK drive
>hdb: Maxtor 6Y120L0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
>hda: cache flushes not supported
> hda: hda1 hda4 < hda5 hda6 >
>hdb: max request size: 128KiB
>hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
>hdb: cache flushes supported
> hdb: hdb1
>Probing IDE interface ide1...
>hdc: SONY CD-RW CRX175A1, ATAPI CD/DVD-ROM drive
>hdd: PIONEER DVD RW DVR-106D, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 29160 Ultra160 SCSI adapter>
>        aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
>hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdd: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
>  Vendor: SEAGATE   Model: ST373405LW        Rev: 0003
>  Type:   Direct-Access                      ANSI SCSI revision: 03
>scsi0:A:8:0: Tagged Queuing enabled.  Depth 32
> target0:0:8: Beginning Domain Validation
> target0:0:8: wide asynchronous.
> target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
> target0:0:8: Ending Domain Validation
>SCSI device sda: 143374741 512-byte hdwr sectors (73408 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 143374741 512-byte hdwr sectors (73408 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>Attached scsi disk sda at scsi0, channel 0, id 8, lun 0
>  Vendor: SEAGATE   Model: ST373405LW        Rev: 0003
>  Type:   Direct-Access                      ANSI SCSI revision: 03
>scsi0:A:9:0: Tagged Queuing enabled.  Depth 32
> target0:0:9: Beginning Domain Validation
> target0:0:9: wide asynchronous.
> target0:0:9: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
>Attached scsi generic sg0 at scsi0, channel 0, id 8, lun 0,  type 0
> target0:0:9: Ending Domain Validation
>SCSI device sdb: 143374741 512-byte hdwr sectors (73408 MB)
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 143374741 512-byte hdwr sectors (73408 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2
>Attached scsi disk sdb at scsi0, channel 0, id 9, lun 0
>Attached scsi generic sg1 at scsi0, channel 0, id 9, lun 0,  type 0
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: Thermal Zone [THRM] (22 C)
>ACPI: Fan [FAN] (on)
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: sda3: found reiserfs format "3.6" with standard journal
>ReiserFS: sda3: using ordered data mode
>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda3: checking transaction log (sda3)
>ReiserFS: sda3: Using r5 hash to sort names
>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>ReiserFS: sdb2: found reiserfs format "3.6" with standard journal
>ReiserFS: sdb2: using ordered data mode
>ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sdb2: checking transaction log (sdb2)
>ReiserFS: sdb2: Using r5 hash to sort names
>NTFS driver 2.1.23 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>NTFS volume version 3.1.
>NTFS volume version 3.1.
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (4095 buckets, 32760 max) - 248 bytes per conntrack
>Adding 987988k swap on /dev/sda2.  Priority:-1 extents:1
>Adding 979924k swap on /dev/sdb1.  Priority:-2 extents:1
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel i845 Chipset.
>agpgart: AGP aperture is 128M @ 0xd0000000
>hw_random: RNG not detected
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000b000
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1f.4: irq 11, io base 0x0000b800
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>CSLIP: code copyright 1989 Regents of the University of California
>ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[eb001000-eb0017ff]  Max Packet=[2048]
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>eth0: RealTek RTL8139 at 0xe1520000, 00:10:dc:30:bf:bc, IRQ 11
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7167  Fri Feb 25 09:08:22 PST 2005
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>bootsplash: status on console 0 changed to on
>ieee1394: Node added: ID:BUS[0-00:1023]  GUID[0050770e501db1ae]
>ieee1394: Host added: ID:BUS[0-01:1023]  GUID[00406300b00c8c68]
>ieee1394: unsolicited response packet received - no tlabel match
>BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
>Initializing USB Mass Storage driver...
>scsi1 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new driver hiddev
>input: USB HID v1.00 Mouse [Cypress Sem PS2/USB Browser Combo Mouse] on usb-0000:00:1f.2-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
>scsi2 : SCSI emulation for IEEE-1394 SBP-2 Devices
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>NET: Registered protocol family 17
>ieee1394: sbp2: Logged into SBP-2 device
>ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
>  Vendor: ST325082  Model: 3A                Rev:     
>  Type:   Direct-Access                      ANSI SCSI revision: 06
>SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
>sdc: got wrong page
>sdc: assuming drive cache: write through
>SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
>sdc: got wrong page
>sdc: assuming drive cache: write through
> sdc: sdc1
>Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
>Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0,  type 0
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>pcc_acpi: module not supported by Novell, setting U taint flag.
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>IA-32 Microcode Update Driver v1.14 unregistered
>bootsplash: status on console 0 changed to on
>  Vendor: Generic   Model:               CF  Rev: 1.6E
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 0
>Attached scsi generic sg3 at scsi1, channel 0, id 0, lun 0,  type 0
>  Vendor: Generic   Model:               MS  Rev: 1.6E
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sde at scsi1, channel 0, id 0, lun 1
>Attached scsi generic sg4 at scsi1, channel 0, id 0, lun 1,  type 0
>  Vendor: Generic   Model:           MMC/SD  Rev: 1.6E
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdf at scsi1, channel 0, id 0, lun 2
>Attached scsi generic sg5 at scsi1, channel 0, id 0, lun 2,  type 0
>  Vendor: Generic   Model:               SM  Rev: 1.6E
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdg at scsi1, channel 0, id 0, lun 3
>Attached scsi generic sg6 at scsi1, channel 0, id 0, lun 3,  type 0
>usb-storage: device scan complete
>powernow: This module only works with AMD K7 CPUs
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>subfs 0.9
>NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option procuid.nosuid.
>subfs: unsuccessful attempt to mount media (256)
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89 
>eth0: no IPv6 routers present
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>subfs: unsuccessful attempt to mount media (256)
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.1.100 DST=224.0.0.251 LEN=109 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=89 
>NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option procuid.nosuid.
>subfs: unsuccessful attempt to mount media (256)
>NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option procuid.nosuid.
>subfs: unsuccessful attempt to mount media (256)
>NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option procuid.nosuid.
>subfs: unsuccessful attempt to mount media (256)
>NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option procuid.nosuid.
>subfs: unsuccessful attempt to mount media (256)
>NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option procuid.nosuid.
>subfs: unsuccessful attempt to mount media (256)
>NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option procuid.nosuid.
>subfs: unsuccessful attempt to mount media (256)
>NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option procuid.nosuid.
>subfs: unsuccessful attempt to mount media (256)
>ieee1394: Node added: ID:BUS[0-00:1023]  GUID[0010b9010131819a]
>ieee1394: Node changed: 0-00:1023 -> 0-01:1023
>ieee1394: Node changed: 0-01:1023 -> 0-02:1023
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: Reconnected to SBP-2 device
>ieee1394: Node 0-01:1023: Max speed [S400] - Max payload [2048]
>scsi3 : SCSI emulation for IEEE-1394 SBP-2 Devices
>ieee1394: sbp2: Logged into SBP-2 device
>ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
>  Vendor: Maxtor    Model: 1394 storage      Rev: v1.3
>  Type:   Direct-Access                      ANSI SCSI revision: 06
>SCSI device sdh: 156355584 512-byte hdwr sectors (80054 MB)
>sdh: asking for cache data failed
>sdh: assuming drive cache: write through
>SCSI device sdh: 156355584 512-byte hdwr sectors (80054 MB)
>sdh: asking for cache data failed
>sdh: assuming drive cache: write through
> sdh: sdh1 sdh2 < sdh5 >
>Attached scsi disk sdh at scsi3, channel 0, id 0, lun 0
>Attached scsi generic sg7 at scsi3, channel 0, id 0, lun 0,  type 0
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdh1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdh1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdh1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ieee1394: Node changed: 0-02:1023 -> 0-00:1023
>ieee1394: Node suspended: ID:BUS[0-01:1023]  GUID[0050770e501db1ae]
>ieee1394: Node suspended: ID:BUS[0-00:1023]  GUID[0010b9010131819a]
>ieee1394: Node changed: 0-01:1023 -> 0-00:1023
>ieee1394: Node resumed: ID:BUS[0-00:1023]  GUID[0050770e501db1ae]
>ieee1394: Node changed: 0-00:1023 -> 0-01:1023
>ieee1394: Node changed: 0-00:1023 -> 0-02:1023
>ieee1394: Node resumed: ID:BUS[0-02:1023]  GUID[0010b9010131819a]
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
>ieee1394: Node changed: 0-02:1023 -> 0-01:1023
>ieee1394: Node changed: 0-01:1023 -> 0-02:1023
>ieee1394: unsolicited response packet received - no tlabel match
>scsi4 : SCSI emulation for IEEE-1394 SBP-2 Devices
>ieee1394: sbp2: Logged into SBP-2 device
>ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
>  Vendor: ST325082  Model: 3A                Rev:     
>  Type:   Direct-Access                      ANSI SCSI revision: 06
>SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
>sdc: got wrong page
>sdc: assuming drive cache: write through
>SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
>sdc: got wrong page
>sdc: assuming drive cache: write through
> sdc: sdc1
>Attached scsi disk sdc at scsi4, channel 0, id 0, lun 0
>Attached scsi generic sg2 at scsi4, channel 0, id 0, lun 0,  type 0
>scsi5 : SCSI emulation for IEEE-1394 SBP-2 Devices
>NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option procuid.nosuid.
>subfs: unsuccessful attempt to mount media (256)
>ieee1394: sbp2: Logged into SBP-2 device
>ieee1394: Node 0-01:1023: Max speed [S400] - Max payload [2048]
>  Vendor: Maxtor    Model: 1394 storage      Rev: v1.3
>  Type:   Direct-Access                      ANSI SCSI revision: 06
>SCSI device sdh: 156355584 512-byte hdwr sectors (80054 MB)
>sdh: asking for cache data failed
>sdh: assuming drive cache: write through
>SCSI device sdh: 156355584 512-byte hdwr sectors (80054 MB)
>sdh: asking for cache data failed
>sdh: assuming drive cache: write through
> sdh: sdh1 sdh2 < sdh5 >
>Attached scsi disk sdh at scsi5, channel 0, id 0, lun 0
>Attached scsi generic sg7 at scsi5, channel 0, id 0, lun 0,  type 0
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdh1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdh1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdh1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ieee1394: Node changed: 0-01:1023 -> 0-00:1023
>ieee1394: Node changed: 0-02:1023 -> 0-01:1023
>ieee1394: Node suspended: ID:BUS[0-00:1023]  GUID[0050770e501db1ae]
>ieee1394: Reconnected to SBP-2 device
>ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
>ieee1394: Error parsing configrom for node 0-00:1023
>ieee1394: Node changed: 0-00:1023 -> 0-01:1023
>ieee1394: Node changed: 0-01:1023 -> 0-02:1023
>ieee1394: sbp2: Error reconnecting to SBP-2 device - reconnect failed
>ieee1394: sbp2: Logged out of SBP-2 device
>ieee1394: sbp2: Logged into SBP-2 device
>ieee1394: Node 0-01:1023: Max speed [S400] - Max payload [2048]
>ieee1394: Node resumed: ID:BUS[0-00:1023]  GUID[0050770e501db1ae]
>ieee1394: sbp2: Error reconnecting to SBP-2 device - reconnect failed
>ieee1394: sbp2: Logged out of SBP-2 device
>ieee1394: sbp2: Logged into SBP-2 device
>ieee1394: Node 0-01:1023: Max speed [S400] - Max payload [2048]
>scsi6 : SCSI emulation for IEEE-1394 SBP-2 Devices
>ieee1394: sbp2: Error logging into SBP-2 device - login timed-out
>sbp2: probe of 0050770e501db1ae-0 failed with error -16
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdh1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ieee1394: sbp2: scsi_id is NULL - device is gone?
>ieee1394: Error parsing configrom for node 0-01:1023
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: Node suspended: ID:BUS[0-01:1023]  GUID[0010b9010131819a]
>scsi7 : SCSI emulation for IEEE-1394 SBP-2 Devices
>ieee1394: sbp2: Error logging into SBP-2 device - login failed
>sbp2: probe of 0050770e501db1ae-0 failed with error -16
>ieee1394: Error parsing configrom for node 0-01:1023
>ieee1394: unsolicited response packet received - no tlabel match
>scsi8 : SCSI emulation for IEEE-1394 SBP-2 Devices
>ieee1394: sbp2: Logged into SBP-2 device
>ieee1394: sbp2: hpsb_node_write failed.
>
>ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
>  Vendor: ST325082  Model: 3A                Rev:     
>  Type:   Direct-Access                      ANSI SCSI revision: 06
>SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
>sdc: got wrong page
>sdc: assuming drive cache: write through
>SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
>sdc: got wrong page
>sdc: assuming drive cache: write through
> sdc: sdc1
>Attached scsi disk sdc at scsi8, channel 0, id 0, lun 0
>Attached scsi generic sg2 at scsi8, channel 0, id 0, lun 0,  type 0
>NTFS-fs error (device sdc1): parse_options(): Unrecognized mount option procuid.nosuid.
>subfs: unsuccessful attempt to mount media (256)
>ieee1394: Node resumed: ID:BUS[0-01:1023]  GUID[0010b9010131819a]
>ieee1394: unsolicited response packet received - no tlabel match
>ieee1394: Reconnected to SBP-2 device
>ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
>scsi9 : SCSI emulation for IEEE-1394 SBP-2 Devices
>ieee1394: sbp2: Logged into SBP-2 device
>ieee1394: Node 0-01:1023: Max speed [S400] - Max payload [2048]
>  Vendor: Maxtor    Model: 1394 storage      Rev: v1.3
>  Type:   Direct-Access                      ANSI SCSI revision: 06
>SCSI device sdh: 156355584 512-byte hdwr sectors (80054 MB)
>sdh: asking for cache data failed
>sdh: assuming drive cache: write through
>SCSI device sdh: 156355584 512-byte hdwr sectors (80054 MB)
>sdh: asking for cache data failed
>sdh: assuming drive cache: write through
> sdh: sdh1 sdh2 < sdh5 >
>Attached scsi disk sdh at scsi9, channel 0, id 0, lun 0
>Attached scsi generic sg7 at scsi9, channel 0, id 0, lun 0,  type 0
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdh1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdh1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.

Actions: View

Attachments on bug 113734: 51077 | 51171 | 51172 | 51304 | 51305