Attachment 53636 Details for Bug 121839

dmesg output

dmesgoutput.txt (text/plain), 13.98 KB, created by yo yeso on 2005-10-11 14:24:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: yo yeso

Created: 2005-10-11 14:24:09 UTC

Size: 13.98 KB

patch

obsolete

>PortatilLINUX:~ # dmesg
>Linux version 2.6.13-15-smp (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 SMP Tue Sep 13 14:56:15 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
> BIOS-e820: 000000001ffd0000 - 000000001ffdf000 (ACPI data)
> BIOS-e820: 000000001ffdf000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000ff780
>On node 0 totalpages: 131024
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126928 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f77d0
>ACPI: RSDT (v001 A M I  OEMRSDT  0x03000525 MSFT 0x00000097) @ 0x1ffd0000
>ACPI: FADT (v002 A M I  OEMFACP  0x03000525 MSFT 0x00000097) @ 0x1ffd0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x03000525 MSFT 0x00000097) @ 0x1ffd0390
>ACPI: OEMB (v001 A M I  AMI_OEM  0x03000525 MSFT 0x00000097) @ 0x1ffdf040
>ACPI: DSDT (v001  755SN 755SN109 0x00000109 INTL 0x02002026) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: Uniwill  Product ID: 755sa        APIC at: 0xFEE00000
>I/O APIC #2 Version 2 at 0xFEC00000.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Processors: 2
>Allocating PCI resources starting at 20000000 (gap: 20000000:dee00000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda3 vga=0x317 selinux=0    resume=/dev/hda2  splash=silent acpi=ht
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 3198.175 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 512012k/524096k available (2330k kernel code, 11444k reserved, 750k data, 252k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6402.80 BogoMIPS (lpj=12805617)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000459d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>mtrr: v2.0 (20020519)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1703k freed
>CPU0: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6396.20 BogoMIPS (lpj=12792403)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000459d 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000459d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel Mobile Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
>Total of 2 processors activated (12799.01 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=0
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>Uncovering SIS963 that hid as a SIS503 (compatible=1)
>Enabling SiS 96x SMBus.
>Boot video device is 0000:01:00.0
>PCI: Using IRQ router SIS [1039/0963] at 0000:00:02.0
>PCI->APIC IRQ transform: 0000:00:02.1[B] -> IRQ 145
>PCI->APIC IRQ transform: 0000:00:02.6[C] -> IRQ 145
>PCI->APIC IRQ transform: 0000:00:02.7[C] -> IRQ 145
>PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 161
>PCI->APIC IRQ transform: 0000:00:03.1[B] -> IRQ 169
>PCI->APIC IRQ transform: 0000:00:03.3[D] -> IRQ 177
>PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 153
>PCI->APIC IRQ transform: 0000:00:08.0[A] -> IRQ 137
>PCI->APIC IRQ transform: 0000:00:09.0[A] -> IRQ 145
>PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 129
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: dde00000-dfefffff
>  PREFETCH window: bdd00000-ddcfffff
>PCI: Bus 2, cardbus bridge: 0000:00:08.0
>  IO window: 00001000-00001fff
>  IO window: 00002000-00002fff
>  PREFETCH window: 20000000-21ffffff
>  MEM window: 22000000-23ffffff
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1129040471.212:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xc0000000, mapped to 0xe0880000, using 6144k, total 131072k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:e610
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: Detected active multiplexing controller, rev 1.0.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>TCP bind hash table entries: 32768 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP reno registered
>NET: Registered protocol family 1
>Starting balanced_irq
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 252k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SIS5513: IDE controller at PCI slot 0000:00:02.5
>SIS5513: chipset revision 0
>SIS5513: not 100% native mode: will probe irqs later
>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: SAMSUNG MP0603H, ATA DISK drive
>input: AT Translated Set 2 keyboard on isa0060/serio0
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 1024KiB
>hda: 117304992 sectors (60060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>Probing IDE interface ide1...
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa36eb3, caps: 0x904713/0x10008
>input: SynPS/2 Synaptics TouchPad on isa0060/serio2
>hdc: _NEC DVD+/-RW ND-6500A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>udev[1707]: run_program: open /dev/null failed
>udev[1707]: run_program: exec of program '/sbin/modprobe' failed
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>NTFS driver 2.1.23 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>parport0: PC-style at 0x378 [PCSPP]
>Adding 1028152k swap on /dev/hda2.  Priority:-1 extents:1
>lp0: using parport0 (polling).
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>    ACPI-0768: *** Warning: Thread 90D could not acquire Mutex [<NULL>] AE_BAD_PARAMETER
>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected SiS 648 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:03.0: irq 161, io mem 0xdfff7000
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.1: irq 169, io mem 0xdfffc000
>i2c-sis96x version 1.0.0
>sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[145]  MMIO=[dffff800-dfffffff]  Max Packet=[2048]
>ehci_hcd 0000:00:03.3: EHCI Host Controller
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:03.3: irq 177, io mem 0xdfffd000
>PCI: cache line size of 128 is not supported by device 0000:00:03.3
>ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>usb 1-1: new low speed USB device using ohci_hcd and address 2
>sis900.c: v1.08.08 Jan. 22 2005
>usb 1-1: new low speed USB device using ohci_hcd and address 3
>intel8x0_measure_ac97_clock: measured 59363 usecs
>intel8x0: clocking to 48000
>0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
>usb 1-1: config 1 has an invalid interface number: 1 but max is 0
>usb 1-1: config 1 has no interface number 0
>0000:00:04.0: Using transceiver found at address 1 as default
>eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 153, 00:03:0d:22:af:c4.
>Yenta: CardBus bridge found at 0000:00:08.0 [1631:d101]
>Yenta: adjusting diagnostic: 40 -> 60
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:08.0, mfunc 0x005c1d22, devctl 0x44
>Yenta: ISA IRQ mask 0x02c0, PCI irq 137
>Socket status: 30000006
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d00755fc1b3]
>cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: excluding 0x820-0x887 0x898-0x89f
>cs: IO port probe 0xa00-0xaff: clean.
>usbcore: registered new driver hiddev
>input: USB HID v1.00 Mouse [PS/2+USB Mouse] on usb-0000:00:03.0-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c03ba0a0(lo)
>IPv6 over IPv4 tunneling driver
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU1 updated from revision 0x5 to 0x9, date = 08022004
>microcode: CPU0 updated from revision 0x5 to 0x9, date = 08022004
>IA-32 Microcode Update Driver v1.14 unregistered
>eth0: Media Link On 100mbps full-duplex
>powernow: This module only works with AMD K7 CPUs
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7676  Fri Jul 29 12:58:54 PDT 2005
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: SiS delay workaround: giving bridge time to recover.
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: SiS delay workaround: giving bridge time to recover.
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>eth0: no IPv6 routers present
>subfs 0.9
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>PortatilLINUX:~ #

Actions: View

Attachments on bug 121839: 52078 | 52079 | 52085 | 53635 | 53636 | 53803 | 53818 | 53820 | 53830 | 53831 | 53834 | 54402 | 54404 | 55985 | 56107 | 56550 | 56551 | 60131