Attachment 54795 Details for Bug 116397

dmesg

dmesgk6h (text/plain), 17.93 KB, created by k. t. on 2005-10-19 15:12:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: k. t.

Created: 2005-10-19 15:12:59 UTC

Size: 17.93 KB

patch

obsolete

>Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffdf000 (usable)
> BIOS-e820: 000000001ffe0000 - 000000001fffffc0 (ACPI data)
> BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>On node 0 totalpages: 131039
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126943 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 INSYDE                                ) @ 0x000e5010
>ACPI: RSDT (v001 INSYDE RSDT_000 0x00000100 ABCD 0x00010200) @ 0x1fffad5b
>ACPI: FADT (v001 INSYDE FACP_000 0x00000100 0000 0x00010200) @ 0x1ffffa80
>ACPI: MADT (v001 STUPID MAPIC_00 0x30307830 ABCD 0x00010200) @ 0x1ffffb10
>ACPI: HPET (v001 INSYDE HPET_000 0x30303030 0000 0x30303030) @ 0x1ffffb80
>ACPI: MCFG (v001 INSYDE MCFG_000 0x30303030 0000 0x30303030) @ 0x1ffffbc0
>ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030522) @ 0x1fffaf6f
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030522) @ 0x1fffad97
>ACPI: DSDT (v001 INSYDE SONOMA   0x00000001 INTL 0x02002036) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: local apic disabled
>Allocating PCI resources starting at 20000000 (gap: 20000000:dff00000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda2 vga=788 selinux=0 resume=/dev/sda1  splash=off
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1729.278 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 513488k/524156k available (2028k kernel code, 10000k reserved, 700k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3463.15 BogoMIPS (lpj=6926302)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1729k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0ca8)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xea344, last bus=2
>PCI: Using MMCONFIG
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
>ACPI: Embedded Controller [EC0] (gpe 23)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 8 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-dfff
>  MEM window: c0000000-cfffffff
>  PREFETCH window: 90000000-9fffffff
>PCI: Bus 3, cardbus bridge: 0000:02:02.0
>  IO window: 0000b000-0000bfff
>  IO window: 00002000-00002fff
>  PREFETCH window: 80000000-81ffffff
>  MEM window: b2000000-b3ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-bfff
>  MEM window: b0000000-bfffffff
>  PREFETCH window: 80000000-8fffffff
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1129733578.248:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>vesafb: framebuffer at 0x90000000, mapped to 0xe0880000, using 3750k, total 16384k
>vesafb: mode is 800x600x16, linelength=1600, pages=2
>vesafb: protected mode interface info at c000:cfb0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 51518 bytes,<6>...found (800x600, 8809 bytes, v3).
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices:
>SBTN AZAL USB1 USB2 USB3 USB7 LANC MODM
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>SCSI subsystem initialized
>libata version 1.12 loaded.
>ahci version 1.01
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ahci: probe of 0000:00:1f.2 failed with error -12
>ata_piix version 1.04
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x1100 irq 14
>ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6003 85:3c68 86:3c01 87:6003 88:203f
>ata1: dev 0 ATA, max UDMA/100, 78242976 sectors: lba48
>ata1(0): applying bridge limits
>ata1: dev 0 configured for UDMA/100
>scsi0 : ata_piix
>  Vendor: ATA       Model: SAMSUNG MP0402H   Rev: UC10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
>ata2: dev 0 ATAPI, max UDMA/33
>ata2(0): applying bridge limits
>ata2: dev 0 configured for UDMA/33
>scsi1 : ata_piix
>  Vendor: MATSHITA  Model: UJ-840D           Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 5
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0
>input: SynPS/2 Synaptics TouchPad on isa0060/serio3
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>    ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x1
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>ReiserFS: sda2: using ordered data mode
>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda2: checking transaction log (sda2)
>ReiserFS: sda2: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 265032k swap on /dev/sda1.  Priority:-1 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>ReiserFS: sda3: found reiserfs format "3.6" with standard journal
>ReiserFS: sda3: using ordered data mode
>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda3: checking transaction log (sda3)
>ReiserFS: sda3: Using r5 hash to sort names
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (4094 buckets, 32752 max) - 248 bytes per conntrack
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 7, io base 0x00001200
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 3, io base 0x00001220
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001240
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: irq 7, io mem 0x20000000
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 8 ports detected
>hw_random: RNG not detected
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>8139too Fast Ethernet driver 0.9.27
>ieee1394: Initialized config rom entry `ip1394'
>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: module not supported by Novell, setting U taint flag.
>ieee80211: 802.11 data/management/control stack, 1.0.3
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: module not supported by Novell, setting U taint flag.
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>intel8x0_measure_ac97_clock: measured 55505 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:02:02.0 [1071:8054]
>Yenta: ISA IRQ mask 0x0810, PCI irq 10
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xbfff
>cs: IO port probe 0xa000-0xbfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xbfffffff
>pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8fffffff
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>eth0: RealTek RTL8139 at 0xe0e52000, 00:40:d0:76:49:a3, IRQ 5
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[3]  MMIO=[fedff800-fedfffff]  Max Packet=[2048]
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ipw2200: Radio Frequency Kill Switch is On:
>Kill switch must be turned off for wireless networking to work.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
>cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040d001002d9e36]
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>NET: Registered protocol family 17
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7676  Fri Jul 29 12:58:54 PDT 2005
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: Lid Switch [LID]
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>powernow: This module only works with AMD K7 CPUs
>acpi-cpufreq: CPU0 - ACPI performance management activated.
>eth0: no IPv6 routers present
>NETDEV WATCHDOG: eth0: transmit timed out
>eth0: Transmit timeout, status 0c 0005 c07f media 10.
>eth0: Tx queue start entry 4  dirty entry 0.
>eth0:  Tx descriptor 0 is 0008a05a. (queue head)
>eth0:  Tx descriptor 1 is 0008a24e.
>eth0:  Tx descriptor 2 is 0008a04e.
>eth0:  Tx descriptor 3 is 0008a046.
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>NETDEV WATCHDOG: eth0: transmit timed out
>eth0: Transmit timeout, status 0c 0005 c07f media 10.
>eth0: Tx queue start entry 4  dirty entry 0.
>eth0:  Tx descriptor 0 is 0008a24e. (queue head)
>eth0:  Tx descriptor 1 is 0008a046.
>eth0:  Tx descriptor 2 is 0008a046.
>eth0:  Tx descriptor 3 is 0008a24e.
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>NET: Registered protocol family 4
>ax25: module not supported by Novell, setting U taint flag.
>NET: Registered protocol family 3
>NET: Registered protocol family 5

Actions: View

Attachments on bug 116397: 54795 | 54796 | 54867 | 54928