Attachment 54943 Details for Bug 129648

/var/log/messages

messages (text/plain), 19.75 KB, created by Michal Svec on 2005-10-20 14:04:23 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michal Svec

Created: 2005-10-20 14:04:23 UTC

Size: 19.75 KB

patch

obsolete

>Oct 20 15:58:53 glum msvec: XXX1
>Oct 20 15:58:53 glum [powersave]: Info (hal_get_property_string:153) property 'battery.charge_level.capacity_state' does not exist.
>Oct 20 15:58:53 glum [powersave]: Info (hal_get_property_int:106) property 'battery.charge_voltage.current' does not exist.
>Oct 20 15:58:53 glum [powersave]: Info (getBatteryDetailedInfo:101) Battery /org/freedesktop/Hal/devices/acpi_BAT1 not present!
>Oct 20 15:58:53 glum [powersave]: DIAG (get_ACPI_General_Battery_Info:591) Battery capacity is equal to last measurement,the battery should not be polled that often
>Oct 20 15:58:53 glum [powersave]: Info (updateBatteryState:1059) Get Battery state: 3
>Oct 20 15:58:53 glum [powersave]: Info (checkBatteryStateChanges:608) Battery state unchanged
>Oct 20 15:58:56 glum ifplugd(eth0)[32589]: Executing '/etc/sysconfig/network/scripts/ifplugd-selectif eth0 down'.
>Oct 20 15:58:56 glum ifplugd(eth0)[32589]: client: /etc/sysconfig/network/scripts/ifplugd-selectif eth0 down
>Oct 20 15:58:56 glum ifplugd(eth0)[32589]: client: ifdown eth0
>Oct 20 15:58:56 glum ifplugd(eth0)[32589]: client: ifdown [DEBUG] eth0
>Oct 20 15:58:56 glum ifplugd(eth0)[32589]: client: ifdown [DEBUG] HWDESC = eth0      CONFIG = eth-id-00:0f:1f:a4:17:f6      INTERFACE = eth0
>Oct 20 15:58:56 glum ifplugd(eth0)[32589]: client: ifdown     eth0      device: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01)
>Oct 20 15:58:56 glum ifplugd(eth0)[32589]: client: ifdown     eth0      configuration: eth-id-00:0f:1f:a4:17:f6
>Oct 20 15:58:56 glum ifplugd(eth0)[32589]: client: ifdown-services [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:58:56 glum ifplugd(eth0)[32589]: client: ifdown-services [DEBUG] No services to handle
>Oct 20 15:58:57 glum ifplugd(eth0)[32589]: client: ifdown-connection [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:58:57 glum ifplugd(eth0)[32589]: client: ifdown-dhcp [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:58:57 glum ifplugd(eth0)[32589]: client: ifdown-dhcp [DEBUG] Shutting down service dhcp client on eth0
>Oct 20 15:58:57 glum dhcpcd[876]: terminating on signal 15
>Oct 20 15:58:57 glum modify_resolvconf: restored /etc/resolv.conf.saved.by.dhcpcd.eth0 to /etc/resolv.conf
>Oct 20 15:58:58 glum ifplugd(eth0)[32589]: client: ifdown-route [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:58:58 glum ifplugd(eth0)[32589]: client: ifdown-wireless [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:58:58 glum ifplugd(eth0)[32589]: client: ifdown-wireless: eth0 is not wireless, exiting
>Oct 20 15:58:58 glum ifdown-wireless: eth0 is not wireless, exiting
>Oct 20 15:58:58 glum ifplugd(eth0)[32589]: Program executed successfully.
>Oct 20 15:58:58 glum ifplugd(eth0)[32589]: Exiting.
>Oct 20 15:58:58 glum ifdown-wireless: eth0 is not wireless, exiting
>Oct 20 15:58:59 glum ifdown-wireless: tun0 is not wireless, exiting
>Oct 20 15:58:59 glum ifdown-wireless: tun1 is not wireless, exiting
>Oct 20 15:59:00 glum ifdown-wireless: prefer wpa_supplicant: yes
>Oct 20 15:59:00 glum ifdown-wireless: No wpa_supplicant running on interface wlan0
>Oct 20 15:59:00 glum ifstatus-wireless: lo is not wireless, exiting
>Oct 20 15:59:01 glum ifup-wireless: lo is not wireless, exiting
>Oct 20 15:59:01 glum ifplugd(eth0)[2852]: ifplugd 0.27 initializing.
>Oct 20 15:59:01 glum ifplugd(eth0)[2852]: Using interface eth0/00:0F:1F:A4:17:F6 with driver <tg3> (version: 3.37)
>Oct 20 15:59:01 glum ifplugd(eth0)[2852]: Using detection mode: SIOCETHTOOL
>Oct 20 15:59:01 glum ifplugd(eth0)[2852]: Initialization complete, link beat not detected.
>Oct 20 15:59:02 glum ifup-wireless: prefer wpa_supplicant: yes
>Oct 20 15:59:02 glum ifup-wireless: configuration requires wpa_supplicant
>Oct 20 15:59:03 glum kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
>Oct 20 15:59:03 glum kernel: tg3: eth0: Flow control is on for TX and on for RX.
>Oct 20 15:59:04 glum ifplugd(eth0)[2852]: Link beat detected.
>Oct 20 15:59:05 glum ifplugd(eth0)[2852]: Executing '/etc/sysconfig/network/scripts/ifplugd-selectif eth0 up'.
>Oct 20 15:59:05 glum ifplugd(eth0)[2852]: client: /etc/sysconfig/network/scripts/ifplugd-selectif eth0 up
>Oct 20 15:59:05 glum ifplugd(eth0)[2852]: client: ifup eth0
>Oct 20 15:59:05 glum ifplugd(eth0)[2852]: client: ifup [DEBUG] eth0
>Oct 20 15:59:05 glum ifplugd(eth0)[2852]: client: ifup [DEBUG] HWDESC = eth0      CONFIG = eth-id-00:0f:1f:a4:17:f6      INTERFACE = eth0
>Oct 20 15:59:05 glum ifplugd(eth0)[2852]: client: ifup     eth0      device: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01)
>Oct 20 15:59:05 glum ifplugd(eth0)[2852]: client: ifup     eth0      configuration: eth-id-00:0f:1f:a4:17:f6
>Oct 20 15:59:05 glum ifplugd(eth0)[2852]: client: ifup-wireless [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:59:05 glum ifplugd(eth0)[2852]: client: ifup-wireless: eth0 is not wireless, exiting
>Oct 20 15:59:05 glum ifup-wireless: eth0 is not wireless, exiting
>Oct 20 15:59:05 glum ifplugd(eth0)[2852]: client: ifup-dhcp [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:59:05 glum ifplugd(eth0)[2852]: client: ifup-dhcp [DEBUG] Starting service dhcp client on eth0
>Oct 20 15:59:06 glum ifplugd(eth0)[2852]: client: ifup-dhcp Starting DHCP Client Daemon on eth0... ifup-dhcp . ifup-dhcp IP/Netmask: 10.20.1.60ifup-dhcp  / 255.255.240.0ifup-dhcp  ('glum')ifup-dhcp  
>Oct 20 15:59:06 glum ifplugd(eth0)[2852]: client: ifup-route [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:59:06 glum ifplugd(eth0)[2852]: client: ifup-route [DEBUG] calling: ip route replace to 169.254.0.0/16 dev eth0  ---> OK
>Oct 20 15:59:06 glum ifplugd(eth0)[2852]: Program executed successfully.
>Oct 20 15:59:12 glum kernel: eth0: no IPv6 routers present
>Oct 20 15:59:13 glum kernel: wlan0: no IPv6 routers present
>Oct 20 15:59:17 glum msvec: XXX2
>Oct 20 15:59:26 glum kernel: tg3: eth0: Link is down.
>Oct 20 15:59:26 glum ifplugd(eth0)[2852]: Link beat lost.
>Oct 20 15:59:31 glum msvec: XXX3
>Oct 20 15:59:32 glum ifplugd(eth0)[2852]: Executing '/etc/sysconfig/network/scripts/ifplugd-selectif eth0 down'.
>Oct 20 15:59:32 glum ifplugd(eth0)[2852]: client: /etc/sysconfig/network/scripts/ifplugd-selectif eth0 down
>Oct 20 15:59:32 glum ifplugd(eth0)[2852]: client: ifdown eth0
>Oct 20 15:59:32 glum ifplugd(eth0)[2852]: client: ifdown [DEBUG] eth0
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: client: ifdown [DEBUG] HWDESC = eth0      CONFIG = eth-id-00:0f:1f:a4:17:f6      INTERFACE = eth0
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: client: ifdown     eth0      device: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01)
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: client: ifdown     eth0      configuration: eth-id-00:0f:1f:a4:17:f6
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: client: ifdown-services [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: client: ifdown-services [DEBUG] No services to handle
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: client: ifdown-connection [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: client: ifdown-dhcp [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: client: ifdown-dhcp [DEBUG] Shutting down service dhcp client on eth0
>Oct 20 15:59:33 glum dhcpcd[3190]: terminating on signal 15
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: client: ifdown-route [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: client: ifdown-wireless [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: client: ifdown-wireless: eth0 is not wireless, exiting
>Oct 20 15:59:33 glum ifdown-wireless: eth0 is not wireless, exiting
>Oct 20 15:59:33 glum ifplugd(eth0)[2852]: Program executed successfully.
>Oct 20 15:59:37 glum kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
>Oct 20 15:59:37 glum kernel: tg3: eth0: Flow control is on for TX and on for RX.
>Oct 20 15:59:37 glum ifplugd(eth0)[2852]: Link beat detected.
>Oct 20 15:59:38 glum ifplugd(eth0)[2852]: Executing '/etc/sysconfig/network/scripts/ifplugd-selectif eth0 up'.
>Oct 20 15:59:38 glum ifplugd(eth0)[2852]: client: /etc/sysconfig/network/scripts/ifplugd-selectif eth0 up
>Oct 20 15:59:38 glum ifplugd(eth0)[2852]: client: ifup eth0
>Oct 20 15:59:39 glum ifplugd(eth0)[2852]: client: ifup [DEBUG] eth0
>Oct 20 15:59:39 glum ifplugd(eth0)[2852]: client: ifup [DEBUG] HWDESC = eth0      CONFIG = eth-id-00:0f:1f:a4:17:f6      INTERFACE = eth0
>Oct 20 15:59:39 glum ifplugd(eth0)[2852]: client: ifup     eth0      device: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01)
>Oct 20 15:59:39 glum ifplugd(eth0)[2852]: client: ifup     eth0      configuration: eth-id-00:0f:1f:a4:17:f6
>Oct 20 15:59:39 glum ifplugd(eth0)[2852]: client: ifup-wireless [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:59:39 glum ifplugd(eth0)[2852]: client: ifup-wireless: eth0 is not wireless, exiting
>Oct 20 15:59:39 glum ifup-wireless: eth0 is not wireless, exiting
>Oct 20 15:59:39 glum ifplugd(eth0)[2852]: client: ifup-dhcp [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:59:39 glum ifplugd(eth0)[2852]: client: ifup-dhcp [DEBUG] Starting service dhcp client on eth0
>Oct 20 15:59:40 glum ifplugd(eth0)[2852]: client: ifup-dhcp Starting DHCP Client Daemon on eth0... ifup-dhcp . ifup-dhcp IP/Netmask: 10.20.1.60ifup-dhcp  / 255.255.240.0ifup-dhcp  ('glum')ifup-dhcp  
>Oct 20 15:59:40 glum ifplugd(eth0)[2852]: client: ifup-route [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0
>Oct 20 15:59:40 glum ifplugd(eth0)[2852]: client: ifup-route [DEBUG] calling: ip route replace to 169.254.0.0/16 dev eth0  ---> OK
>Oct 20 15:59:40 glum ifplugd(eth0)[2852]: Program executed successfully.
>Oct 20 15:59:44 glum kernel: eth0: no IPv6 routers present
>Oct 20 15:59:45 glum msvec: XXX4
>Oct 20 15:59:53 glum [powersave]: Info (hal_get_property_string:153) property 'battery.charge_level.capacity_state' does not exist.
>Oct 20 15:59:53 glum [powersave]: Info (hal_get_property_int:106) property 'battery.charge_voltage.current' does not exist.
>Oct 20 15:59:53 glum [powersave]: Info (getBatteryDetailedInfo:101) Battery /org/freedesktop/Hal/devices/acpi_BAT1 not present!
>Oct 20 15:59:53 glum [powersave]: DIAG (get_ACPI_General_Battery_Info:591) Battery capacity is equal to last measurement,the battery should not be polled that often
>Oct 20 15:59:53 glum [powersave]: Info (updateBatteryState:1059) Get Battery state: 3
>Oct 20 15:59:53 glum [powersave]: Info (checkBatteryStateChanges:608) Battery state unchanged
>Oct 20 15:59:56 glum dhcpcd[3514]: terminating on signal 15
>Oct 20 15:59:56 glum ifplugd(eth0)[2852]: Link beat lost.
>Oct 20 15:59:57 glum logger: Initializing interface 'wlan0' conf '/var/run/wpa_supplicant-wlan0.conf' driver 'ndiswrapper'
>Oct 20 15:59:57 glum logger: Configuration file '/var/run/wpa_supplicant-wlan0.conf' -> '/var/run/wpa_supplicant-wlan0.conf'
>Oct 20 15:59:57 glum logger: Reading configuration file '/var/run/wpa_supplicant-wlan0.conf'
>Oct 20 15:59:57 glum logger: ctrl_interface='/var/run/wpa_supplicant'
>Oct 20 15:59:57 glum logger: Priority group 0
>Oct 20 15:59:57 glum logger:    id=0 ssid='Rebel'
>Oct 20 15:59:57 glum logger: Initializing interface (2) 'wlan0'
>Oct 20 15:59:57 glum logger: EAPOL: SUPP_PAE entering state DISCONNECTED
>Oct 20 15:59:57 glum logger: EAPOL: KEY_RX entering state NO_KEY_RECEIVE
>Oct 20 15:59:57 glum logger: EAPOL: SUPP_BE entering state INITIALIZE
>Oct 20 15:59:57 glum logger: EAP: EAP entering state DISABLED
>Oct 20 15:59:57 glum logger: EAPOL: External notification - portEnabled=0
>Oct 20 15:59:57 glum logger: EAPOL: External notification - portValid=0
>Oct 20 15:59:57 glum logger: ioctl[SIOCSIWPMKSA]: Operation not supported
>Oct 20 15:59:57 glum logger: SIOCGIWRANGE: WE(compiled)=18 WE(source)=18 enc_capa=0xe
>Oct 20 15:59:57 glum logger:   capabilities: key_mgmt 0xa enc 0xf
>Oct 20 15:59:57 glum logger: Own MAC address: 00:90:4b:73:11:62
>Oct 20 15:59:57 glum logger: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
>Oct 20 15:59:57 glum logger: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
>Oct 20 15:59:57 glum logger: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
>Oct 20 15:59:57 glum logger: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
>Oct 20 15:59:57 glum logger: Setting scan request: 0 sec 100000 usec
>Oct 20 15:59:57 glum logger: Using existing control interface directory.
>Oct 20 15:59:57 glum logger: Wireless event: cmd=0x8b06 len=8
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>Oct 20 15:59:57 glum logger: State: DISCONNECTED -> SCANNING
>Oct 20 15:59:57 glum logger: Starting AP scan (specific SSID)
>Oct 20 15:59:57 glum logger: Scan SSID - hexdump_ascii(len=5):
>Oct 20 15:59:57 glum logger:      52 65 62 65 6c                                    Rebel           
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: Scan timeout - try to get results
>Oct 20 15:59:57 glum logger: Received 0 bytes of scan results (0 BSSes)
>Oct 20 15:59:57 glum logger: Scan results: 0
>Oct 20 15:59:57 glum logger: Selecting BSS from priority group 0
>Oct 20 15:59:57 glum logger: No suitable AP found.
>Oct 20 15:59:57 glum logger: Setting scan request: 5 sec 0 usec
>Oct 20 15:59:57 glum logger: Starting AP scan (broadcast SSID)
>Oct 20 15:59:57 glum logger: Scan timeout - try to get results
>Oct 20 15:59:57 glum logger: Received 0 bytes of scan results (0 BSSes)
>Oct 20 15:59:57 glum logger: Scan results: 0
>Oct 20 15:59:57 glum logger: Selecting BSS from priority group 0
>Oct 20 15:59:57 glum logger: No suitable AP found.
>Oct 20 15:59:57 glum logger: Setting scan request: 5 sec 0 usec
>Oct 20 15:59:57 glum logger: Starting AP scan (specific SSID)
>Oct 20 15:59:57 glum logger: Scan SSID - hexdump_ascii(len=5):
>Oct 20 15:59:57 glum logger:      52 65 62 65 6c                                    Rebel           
>Oct 20 15:59:57 glum logger: Scan timeout - try to get results
>Oct 20 15:59:57 glum logger: Received 0 bytes of scan results (0 BSSes)
>Oct 20 15:59:57 glum logger: Scan results: 0
>Oct 20 15:59:57 glum logger: Selecting BSS from priority group 0
>Oct 20 15:59:57 glum logger: No suitable AP found.
>Oct 20 15:59:57 glum logger: Setting scan request: 5 sec 0 usec
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: Starting AP scan (broadcast SSID)
>Oct 20 15:59:57 glum logger: Scan timeout - try to get results
>Oct 20 15:59:57 glum logger: Received 0 bytes of scan results (0 BSSes)
>Oct 20 15:59:57 glum logger: Scan results: 0
>Oct 20 15:59:57 glum logger: Selecting BSS from priority group 0
>Oct 20 15:59:57 glum logger: No suitable AP found.
>Oct 20 15:59:57 glum logger: Setting scan request: 5 sec 0 usec
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: Starting AP scan (specific SSID)
>Oct 20 15:59:57 glum logger: Scan SSID - hexdump_ascii(len=5):
>Oct 20 15:59:57 glum logger:      52 65 62 65 6c                                    Rebel           
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: Scan timeout - try to get results
>Oct 20 15:59:57 glum logger: Received 176 bytes of scan results (1 BSSes)
>Oct 20 15:59:57 glum logger: Scan results: 1
>Oct 20 15:59:57 glum logger: Selecting BSS from priority group 0
>Oct 20 15:59:57 glum logger: 0: 00:30:4f:21:be:6c ssid='KAHOBU5' wpa_ie_len=0 rsn_ie_len=0 caps=0x11
>Oct 20 15:59:57 glum logger:    skip - no WPA/RSN IE
>Oct 20 15:59:57 glum logger: No suitable AP found.
>Oct 20 15:59:57 glum logger: Setting scan request: 5 sec 0 usec
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: Starting AP scan (broadcast SSID)
>Oct 20 15:59:57 glum logger: Scan timeout - try to get results
>Oct 20 15:59:57 glum logger: Received 0 bytes of scan results (0 BSSes)
>Oct 20 15:59:57 glum logger: Scan results: 0
>Oct 20 15:59:57 glum logger: Selecting BSS from priority group 0
>Oct 20 15:59:57 glum logger: No suitable AP found.
>Oct 20 15:59:57 glum logger: Setting scan request: 5 sec 0 usec
>Oct 20 15:59:57 glum logger: Starting AP scan (specific SSID)
>Oct 20 15:59:57 glum logger: Scan SSID - hexdump_ascii(len=5):
>Oct 20 15:59:57 glum logger:      52 65 62 65 6c                                    Rebel           
>Oct 20 15:59:57 glum logger: Scan timeout - try to get results
>Oct 20 15:59:57 glum logger: Received 0 bytes of scan results (0 BSSes)
>Oct 20 15:59:57 glum logger: Scan results: 0
>Oct 20 15:59:57 glum logger: Selecting BSS from priority group 0
>Oct 20 15:59:57 glum logger: No suitable AP found.
>Oct 20 15:59:57 glum logger: Setting scan request: 5 sec 0 usec
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:57 glum ifdown-wireless: eth0 is not wireless, exiting
>Oct 20 15:59:57 glum dhcpcd[3116]: terminating on signal 15
>Oct 20 15:59:57 glum logger: RTM_NEWLINK, IFLA_IFNAME: Intel2_packet_receive - recvfrom: Network is down
>Oct 20 15:59:57 glum dhcpcd-hook: Skipping 'ifdown $INTERFACE -o dhcp' call
>Oct 20 15:59:58 glum ifdown-wireless: prefer wpa_supplicant: yes
>Oct 20 15:59:58 glum logger: rface 'eth0' added
>Oct 20 15:59:58 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added
>Oct 20 15:59:58 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>Oct 20 15:59:58 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added
>Oct 20 15:59:58 glum logger: State: SCANNING -> DISCONNECTED
>Oct 20 15:59:58 glum logger: No keys have been configured - skip key clearing
>Oct 20 15:59:58 glum logger: EAPOL: External notification - portEnabled=0
>Oct 20 15:59:58 glum logger: EAPOL: External notification - portValid=0
>Oct 20 15:59:58 glum logger: No keys have been configured - skip key clearing
>Oct 20 15:59:58 glum logger: Control interface directory not empty - leaving it behind
>Oct 20 15:59:58 glum ifup-wireless: eth0 is not wireless, exiting
>Oct 20 16:00:00 glum kernel: tg3: eth0: Link is up at 100 Mbps, full duplex.
>Oct 20 16:00:00 glum kernel: tg3: eth0: Flow control is on for TX and on for RX.
>Oct 20 16:00:00 glum ifplugd(eth0)[2852]: Link beat detected.
>Oct 20 16:00:02 glum [powersave]: Info (start:455) Handling dbus request on fd: 5
>Oct 20 16:00:02 glum [powersave]: Info (DBusDispatchStatusFunc:149) 
>Oct 20 16:00:02 glum [powersave]: Info (DBusDispatchStatusFunc:154) We have data to process
>Oct 20 16:00:02 glum [powersave]: Info (filter_function:317) Signal from org.freedesktop.DBus with member NameOwnerChanged received
>Oct 20 16:00:02 glum [powersave]: Info (filter_function:363) Message handled
>Oct 20 16:00:02 glum [powersave]: Info (DBusDispatchStatusFunc:149) 
>Oct 20 16:00:02 glum [powersave]: Info (DBusDispatchStatusFunc:158) Data has been processed
>Oct 20 16:00:02 glum [powersave]: Info (start:455) Handling dbus request on fd: 5
>Oct 20 16:00:02 glum [powersave]: Info (DBusDispatchStatusFunc:149) 
>Oct 20 16:00:02 glum [powersave]: Info (DBusDispatchStatusFunc:154) We have data to process
>Oct 20 16:00:02 glum [powersave]: Info (filter_function:317) Signal from org.freedesktop.DBus with member NameOwnerChanged received
>Oct 20 16:00:02 glum [powersave]: Info (filter_function:363) Message handled
>Oct 20 16:00:02 glum [powersave]: Info (DBusDispatchStatusFunc:149) 
>Oct 20 16:00:02 glum [powersave]: Info (DBusDispatchStatusFunc:158) Data has been processed
>Oct 20 16:00:03 glum modify_resolvconf: Service dhcpcd modified /etc/resolv.conf. See info block in this file

Actions: View

Attachments on bug 129648: 54902 | 54943 | 55048 | 55090