Bugzilla – Attachment 55048 Details for
Bug 129648
startmode=ifplugd doesn't set resolv.conf
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
/var/log/messages (2nd test)
messages (text/plain), 17.13 KB, created by
Michal Svec
on 2005-10-21 09:17:38 UTC
(
hide
)
Description:
/var/log/messages (2nd test)
Filename:
MIME Type:
Creator:
Michal Svec
Created:
2005-10-21 09:17:38 UTC
Size:
17.13 KB
patch
obsolete
>Oct 21 11:09:57 glum msvec: YYY1 >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: Executing '/etc/sysconfig/network/scripts/ifplugd-selectif eth0 down'. >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: /etc/sysconfig/network/scripts/ifplugd-selectif eth0 down >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown eth0 >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown [DEBUG] eth0 >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown [DEBUG] HWDESC = eth0 CONFIG = eth-id-00:0f:1f:a4:17:f6 INTERFACE = eth0 >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown eth0 device: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01) >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown eth0 configuration: eth-id-00:0f:1f:a4:17:f6 >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown-services [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown-services [DEBUG] No services to handle >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown-connection [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown-dhcp [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown-dhcp [DEBUG] Shutting down service dhcp client on eth0 >Oct 21 11:10:06 glum dhcpcd[22218]: terminating on signal 15 >Oct 21 11:10:06 glum modify_resolvconf: restored /etc/resolv.conf.saved.by.dhcpcd.eth0 to /etc/resolv.conf >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown-route [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown-wireless [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: client: ifdown-wireless: eth0 is not wireless, exiting >Oct 21 11:10:06 glum ifdown-wireless: eth0 is not wireless, exiting >Oct 21 11:10:06 glum ifplugd(eth0)[21357]: Program executed successfully. >Oct 21 11:10:07 glum ifplugd(eth0)[21357]: Exiting. >Oct 21 11:10:07 glum ifdown-wireless: eth0 is not wireless, exiting >Oct 21 11:10:07 glum ifdown-wireless: prefer wpa_supplicant: yes >Oct 21 11:10:07 glum ifdown-wireless: No wpa_supplicant running on interface wlan0 >Oct 21 11:10:07 glum ifstatus-wireless: lo is not wireless, exiting >Oct 21 11:10:08 glum ifup-wireless: lo is not wireless, exiting >Oct 21 11:10:08 glum ifplugd(eth0)[22884]: ifplugd 0.27 initializing. >Oct 21 11:10:08 glum ifplugd(eth0)[22884]: Using interface eth0/00:0F:1F:A4:17:F6 with driver <tg3> (version: 3.37) >Oct 21 11:10:08 glum ifplugd(eth0)[22884]: Using detection mode: SIOCETHTOOL >Oct 21 11:10:08 glum ifplugd(eth0)[22884]: Initialization complete, link beat not detected. >Oct 21 11:10:08 glum ifup-wireless: prefer wpa_supplicant: yes >Oct 21 11:10:08 glum ifup-wireless: configuration requires wpa_supplicant >Oct 21 11:10:10 glum kernel: tg3: eth0: Link is up at 100 Mbps, full duplex. >Oct 21 11:10:10 glum kernel: tg3: eth0: Flow control is on for TX and on for RX. >Oct 21 11:10:10 glum ifplugd(eth0)[22884]: Link beat detected. >Oct 21 11:10:11 glum ifplugd(eth0)[22884]: Executing '/etc/sysconfig/network/scripts/ifplugd-selectif eth0 up'. >Oct 21 11:10:11 glum ifplugd(eth0)[22884]: client: /etc/sysconfig/network/scripts/ifplugd-selectif eth0 up >Oct 21 11:10:11 glum ifplugd(eth0)[22884]: client: ifup eth0 >Oct 21 11:10:11 glum ifplugd(eth0)[22884]: client: ifup [DEBUG] eth0 >Oct 21 11:10:11 glum ifplugd(eth0)[22884]: client: ifup [DEBUG] HWDESC = eth0 CONFIG = eth-id-00:0f:1f:a4:17:f6 INTERFACE = eth0 >Oct 21 11:10:11 glum ifplugd(eth0)[22884]: client: ifup eth0 device: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01) >Oct 21 11:10:11 glum ifplugd(eth0)[22884]: client: ifup eth0 configuration: eth-id-00:0f:1f:a4:17:f6 >Oct 21 11:10:11 glum ifplugd(eth0)[22884]: client: ifup-wireless [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:10:11 glum ifplugd(eth0)[22884]: client: ifup-wireless: eth0 is not wireless, exiting >Oct 21 11:10:11 glum ifup-wireless: eth0 is not wireless, exiting >Oct 21 11:10:11 glum ifplugd(eth0)[22884]: client: ifup-dhcp [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:10:11 glum ifplugd(eth0)[22884]: client: ifup-dhcp [DEBUG] Starting service dhcp client on eth0 >Oct 21 11:10:12 glum ifplugd(eth0)[22884]: client: ifup-dhcp Starting DHCP Client Daemon on eth0... ifup-dhcp . ifup-dhcp IP/Netmask: 10.20.1.60ifup-dhcp / 255.255.240.0ifup-dhcp ('glum')ifup-dhcp >Oct 21 11:10:12 glum ifplugd(eth0)[22884]: client: ifup-route [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:10:12 glum ifplugd(eth0)[22884]: client: ifup-route [DEBUG] calling: ip route replace to 169.254.0.0/16 dev eth0 ---> OK >Oct 21 11:10:13 glum ifplugd(eth0)[22884]: Program executed successfully. >Oct 21 11:10:18 glum kernel: eth0: no IPv6 routers present >Oct 21 11:10:19 glum kernel: wlan0: no IPv6 routers present >Oct 21 11:10:28 glum [powersave]: Info (hal_get_property_string:153) property 'battery.charge_level.capacity_state' does not exist. >Oct 21 11:10:28 glum [powersave]: Info (hal_get_property_int:106) property 'battery.charge_voltage.current' does not exist. >Oct 21 11:10:28 glum [powersave]: Info (getBatteryDetailedInfo:101) Battery /org/freedesktop/Hal/devices/acpi_BAT1 not present! >Oct 21 11:10:28 glum [powersave]: DIAG (get_ACPI_General_Battery_Info:591) Battery capacity is equal to last measurement,the battery should not be polled that often >Oct 21 11:10:28 glum [powersave]: Info (updateBatteryState:1059) Get Battery state: 3 >Oct 21 11:10:28 glum [powersave]: Info (checkBatteryStateChanges:608) Battery state unchanged >Oct 21 11:10:29 glum msvec: YYY2 >Oct 21 11:10:30 glum sudo: msvec : TTY=pts/6 ; PWD=/home/msvec ; USER=root ; COMMAND=/bin/su - >Oct 21 11:10:31 glum su: (to root) msvec on /dev/pts/6 >Oct 21 11:10:56 glum kernel: tg3: eth0: Link is down. >Oct 21 11:10:57 glum ifplugd(eth0)[22884]: Link beat lost. >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: Executing '/etc/sysconfig/network/scripts/ifplugd-selectif eth0 down'. >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: /etc/sysconfig/network/scripts/ifplugd-selectif eth0 down >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown eth0 >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown [DEBUG] eth0 >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown [DEBUG] HWDESC = eth0 CONFIG = eth-id-00:0f:1f:a4:17:f6 INTERFACE = eth0 >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown eth0 device: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01) >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown eth0 configuration: eth-id-00:0f:1f:a4:17:f6 >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown-services [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown-services [DEBUG] No services to handle >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown-connection [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown-dhcp [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown-dhcp [DEBUG] Shutting down service dhcp client on eth0 >Oct 21 11:11:03 glum dhcpcd[23139]: terminating on signal 15 >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown-route [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown-wireless [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: client: ifdown-wireless: eth0 is not wireless, exiting >Oct 21 11:11:03 glum ifdown-wireless: eth0 is not wireless, exiting >Oct 21 11:11:03 glum ifplugd(eth0)[22884]: Program executed successfully. >Oct 21 11:11:14 glum kernel: eth0: no IPv6 routers present >Oct 21 11:11:16 glum logger: Initializing interface 'wlan0' conf '/var/run/wpa_supplicant-wlan0.conf' driver 'ndiswrapper' >Oct 21 11:11:16 glum logger: Configuration file '/var/run/wpa_supplicant-wlan0.conf' -> '/var/run/wpa_supplicant-wlan0.conf' >Oct 21 11:11:16 glum logger: Reading configuration file '/var/run/wpa_supplicant-wlan0.conf' >Oct 21 11:11:16 glum logger: ctrl_interface='/var/run/wpa_supplicant' >Oct 21 11:11:16 glum logger: Priority group 0 >Oct 21 11:11:16 glum logger: id=0 ssid='Rebel' >Oct 21 11:11:16 glum logger: Initializing interface (2) 'wlan0' >Oct 21 11:11:16 glum logger: EAPOL: SUPP_PAE entering state DISCONNECTED >Oct 21 11:11:16 glum logger: EAPOL: KEY_RX entering state NO_KEY_RECEIVE >Oct 21 11:11:16 glum logger: EAPOL: SUPP_BE entering state INITIALIZE >Oct 21 11:11:16 glum logger: EAP: EAP entering state DISABLED >Oct 21 11:11:16 glum logger: EAPOL: External notification - portEnabled=0 >Oct 21 11:11:16 glum logger: EAPOL: External notification - portValid=0 >Oct 21 11:11:16 glum logger: ioctl[SIOCSIWPMKSA]: Operation not supported >Oct 21 11:11:16 glum logger: SIOCGIWRANGE: WE(compiled)=18 WE(source)=18 enc_capa=0xe >Oct 21 11:11:16 glum logger: capabilities: key_mgmt 0xa enc 0xf >Oct 21 11:11:16 glum logger: Own MAC address: 00:90:4b:73:11:62 >Oct 21 11:11:16 glum logger: wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 >Oct 21 11:11:16 glum logger: wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 >Oct 21 11:11:16 glum logger: wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 >Oct 21 11:11:16 glum logger: wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 >Oct 21 11:11:16 glum logger: Setting scan request: 0 sec 100000 usec >Oct 21 11:11:16 glum logger: Using existing control interface directory. >Oct 21 11:11:16 glum logger: Wireless event: cmd=0x8b06 len=8 >Oct 21 11:11:16 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added >Oct 21 11:11:16 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added >Oct 21 11:11:16 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added >Oct 21 11:11:16 glum logger: State: DISCONNECTED -> SCANNING >Oct 21 11:11:16 glum logger: Starting AP scan (specific SSID) >Oct 21 11:11:16 glum logger: Scan SSID - hexdump_ascii(len=5): >Oct 21 11:11:16 glum logger: 52 65 62 65 6c Rebel >Oct 21 11:11:16 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added >Oct 21 11:11:16 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added >Oct 21 11:11:16 glum logger: Scan timeout - try to get results >Oct 21 11:11:16 glum logger: Received 0 bytes of scan results (0 BSSes) >Oct 21 11:11:16 glum logger: Scan results: 0 >Oct 21 11:11:16 glum logger: Selecting BSS from priority group 0 >Oct 21 11:11:16 glum logger: No suitable AP found. >Oct 21 11:11:16 glum logger: Setting scan request: 5 sec 0 usec >Oct 21 11:11:16 glum logger: Starting AP scan (broadcast SSID) >Oct 21 11:11:16 glum logger: Scan timeout - try to get results >Oct 21 11:11:16 glum logger: Received 0 bytes of scan results (0 BSSes) >Oct 21 11:11:16 glum logger: Scan results: 0 >Oct 21 11:11:16 glum logger: Selecting BSS from priority group 0 >Oct 21 11:11:16 glum logger: No suitable AP found. >Oct 21 11:11:16 glum logger: Setting scan request: 5 sec 0 usec >Oct 21 11:11:16 glum logger: Starting AP scan (specific SSID) >Oct 21 11:11:16 glum logger: Scan SSID - hexdump_ascii(len=5): >Oct 21 11:11:16 glum logger: 52 65 62 65 6c Rebel >Oct 21 11:11:16 glum logger: Scan timeout - try to get results >Oct 21 11:11:16 glum logger: Received 0 bytes of scan results (0 BSSes) >Oct 21 11:11:16 glum logger: Scan results: 0 >Oct 21 11:11:16 glum logger: Selecting BSS from priority group 0 >Oct 21 11:11:16 glum logger: No suitable AP found. >Oct 21 11:11:16 glum logger: Setting scan request: 5 sec 0 usec >Oct 21 11:11:16 glum logger: Starting AP scan (broadcast SSID) >Oct 21 11:11:16 glum logger: Scan timeout - try to get results >Oct 21 11:11:16 glum logger: Received 0 bytes of scan results (0 BSSes) >Oct 21 11:11:16 glum logger: Scan results: 0 >Oct 21 11:11:16 glum logger: Selecting BSS from priority group 0 >Oct 21 11:11:16 glum logger: No suitable AP found. >Oct 21 11:11:16 glum logger: Setting scan request: 5 sec 0 usec >Oct 21 11:11:16 glum logger: Starting AP scan (specific SSID) >Oct 21 11:11:16 glum logger: Scan SSID - hexdump_ascii(len=5): >Oct 21 11:11:16 glum logger: 52 65 62 65 6c Rebel >Oct 21 11:11:16 glum logger: Scan timeout - try to get results >Oct 21 11:11:16 glum logger: Received 0 bytes of scan results (0 BSSes) >Oct 21 11:11:16 glum logger: Scan results: 0 >Oct 21 11:11:16 glum logger: Selecting BSS from priority group 0 >Oct 21 11:11:16 glum logger: No suitable AP found. >Oct 21 11:11:16 glum logger: Setting scan request: 5 sec 0 usec >Oct 21 11:11:16 glum logger: Starting AP scan (broadcast SSID) >Oct 21 11:11:16 glum logger: Scan timeout - try to get results >Oct 21 11:11:16 glum logger: Received 0 bytes of scan results (0 BSSes) >Oct 21 11:11:16 glum logger: Scan results: 0 >Oct 21 11:11:16 glum logger: Selecting BSS from priority group 0 >Oct 21 11:11:16 glum logger: No suitable AP found. >Oct 21 11:11:16 glum logger: Setting scan request: 5 sec 0 usec >Oct 21 11:11:16 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added >Oct 21 11:11:16 glum logger: Starting AP scan (specific SSID) >Oct 21 11:11:16 glum logger: Scan SSID - hexdump_ascii(len=5): >Oct 21 11:11:16 glum logger: 52 65 62 65 6c Rebel >Oct 21 11:11:16 glum logger: Scan timeout - try to get results >Oct 21 11:11:16 glum logger: Received 0 bytes of scan results (0 BSSes) >Oct 21 11:11:16 glum logger: Scan results: 0 >Oct 21 11:11:16 glum logger: Selecting BSS from priority group 0 >Oct 21 11:11:16 glum logger: No suitable AP found. >Oct 21 11:11:16 glum logger: Setting scan request: 5 sec 0 usec >Oct 21 11:11:16 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added >Oct 21 11:11:16 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added >Oct 21 11:11:16 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added >Oct 21 11:11:16 glum logger: RTM_NEWLINK, IFLA_IFNAME: Interface 'eth0' added >Oct 21 11:11:16 glum logger: Starting AP scan (broadcast SSID) >Oct 21 11:11:16 glum logger: Scan timeout - try to get results >Oct 21 11:11:16 glum logger: Received 0 bytes of scan results (0 BSSes) >Oct 21 11:11:16 glum logger: Scan results: 0 >Oct 21 11:11:16 glum logger: Selecting BSS from priority group 0 >Oct 21 11:11:16 glum logger: No suitable AP found. >Oct 21 11:11:16 glum logger: Setting scan request: 5 sec 0 usec >Oct 21 11:11:16 glum logger: Starting AP scan (specific SSID) >Oct 21 11:11:16 glum logger: Scan SSID - hexdump_ascii(len=5): >Oct 21 11:11:16 glum logger: 52 65 62 65 6c Rebel >Oct 21 11:11:16 glum logger: Scan timeout - try to get results >Oct 21 11:11:21 glum msvec: YYY3 >Oct 21 11:11:26 glum kernel: tg3: eth0: Link is up at 100 Mbps, full duplex. >Oct 21 11:11:26 glum kernel: tg3: eth0: Flow control is on for TX and on for RX. >Oct 21 11:11:26 glum ifplugd(eth0)[22884]: Link beat detected. >Oct 21 11:11:28 glum ifplugd(eth0)[22884]: Executing '/etc/sysconfig/network/scripts/ifplugd-selectif eth0 up'. >Oct 21 11:11:28 glum ifplugd(eth0)[22884]: client: /etc/sysconfig/network/scripts/ifplugd-selectif eth0 up >Oct 21 11:11:28 glum ifplugd(eth0)[22884]: client: ifup eth0 >Oct 21 11:11:28 glum ifplugd(eth0)[22884]: client: ifup [DEBUG] eth0 >Oct 21 11:11:28 glum ifplugd(eth0)[22884]: client: ifup [DEBUG] HWDESC = eth0 CONFIG = eth-id-00:0f:1f:a4:17:f6 INTERFACE = eth0 >Oct 21 11:11:28 glum ifplugd(eth0)[22884]: client: ifup eth0 device: Broadcom Corporation NetXtreme BCM5705M Gigabit Ethernet (rev 01) >Oct 21 11:11:28 glum ifplugd(eth0)[22884]: client: ifup eth0 configuration: eth-id-00:0f:1f:a4:17:f6 >Oct 21 11:11:28 glum ifplugd(eth0)[22884]: client: ifup-wireless [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:11:28 glum ifplugd(eth0)[22884]: client: ifup-wireless: eth0 is not wireless, exiting >Oct 21 11:11:28 glum ifup-wireless: eth0 is not wireless, exiting >Oct 21 11:11:28 glum ifplugd(eth0)[22884]: client: ifup-dhcp [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:11:28 glum ifplugd(eth0)[22884]: client: ifup-dhcp [DEBUG] Starting service dhcp client on eth0 >Oct 21 11:11:28 glum [powersave]: Info (hal_get_property_string:153) property 'battery.charge_level.capacity_state' does not exist. >Oct 21 11:11:28 glum [powersave]: Info (hal_get_property_int:106) property 'battery.charge_voltage.current' does not exist. >Oct 21 11:11:28 glum [powersave]: Info (getBatteryDetailedInfo:101) Battery /org/freedesktop/Hal/devices/acpi_BAT1 not present! >Oct 21 11:11:28 glum [powersave]: DIAG (get_ACPI_General_Battery_Info:591) Battery capacity is equal to last measurement,the battery should not be polled that often >Oct 21 11:11:28 glum [powersave]: Info (updateBatteryState:1059) Get Battery state: 3 >Oct 21 11:11:28 glum [powersave]: Info (checkBatteryStateChanges:608) Battery state unchanged >Oct 21 11:11:29 glum ifplugd(eth0)[22884]: client: ifup-dhcp Starting DHCP Client Daemon on eth0... ifup-dhcp . ifup-dhcp IP/Netmask: 10.20.1.60ifup-dhcp / 255.255.240.0ifup-dhcp ('glum')ifup-dhcp >Oct 21 11:11:29 glum ifplugd(eth0)[22884]: client: ifup-route [DEBUG] eth-id-00:0f:1f:a4:17:f6 eth0 >Oct 21 11:11:29 glum ifplugd(eth0)[22884]: client: ifup-route [DEBUG] calling: ip route replace to 169.254.0.0/16 dev eth0 ---> OK >Oct 21 11:11:29 glum ifplugd(eth0)[22884]: Program executed successfully. >Oct 21 11:11:39 glum msvec: YYY4
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 129648
:
54902
|
54943
| 55048 |
55090