Attachment 55497 Details for Bug 130205

Hardware Information (full)

hwinfo.txt (text/plain), 201.10 KB, created by Alexander Lavrinenko on 2005-10-26 04:56:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alexander Lavrinenko

Created: 2005-10-26 04:56:16 UTC

Size: 201.10 KB

patch

obsolete

>============ start debug info ============
>libhd version 11.27 (ia32)
>kernel version is 2.6
>----- /proc/cmdline -----
>  root=/dev/sda3 vga=0x317 selinux=0    resume=/dev/sda2  splash=silent
>----- /proc/cmdline end -----
>debug = 0xff7ffff7
>probe = 0x00138fc4aa17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc)
>shm: attached segment 65536 at 0x40577000
>>> hal.1: read hal data
>  hal: connected to: :1.10
>----- hal device list -----
>  0: udi = '/org/freedesktop/Hal/devices/acpi_SLPB'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_SLPB'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Sleep Button'
>  button.type = 'sleep'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/sleep/SLPB'
>
>  1: udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/power/PWRF'
>
>  2: udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/power/PWRB'
>
>  3: udi = '/org/freedesktop/Hal/devices/acpi_LID'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_LID'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = true
>  button.state.value = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Lid Switch'
>  button.type = 'lid'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/lid/LID'
>
>  4: udi = '/org/freedesktop/Hal/devices/acpi_AC0'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_AC0'
>  linux.hotplug_type = 4 (0x4)
>  ac_adapter.present = true
>  info.capabilities = { 'ac_adapter' }
>  info.category = 'ac_adapter'
>  info.product = 'AC Adapter'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 3 (0x3)
>  linux.acpi_path = '/proc/acpi/ac_adapter/AC0'
>
>  5: udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
>  linux.hotplug_type = 4 (0x4)
>  processor.can_throttle = true
>  processor.number = 0 (0x0)
>  info.capabilities = { 'processor' }
>  info.category = 'processor'
>  info.product = 'Processor'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 1 (0x1)
>  linux.acpi_path = '/proc/acpi/processor/CPU1'
>
>  6: udi = '/org/freedesktop/Hal/devices/acpi_BAT0'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_BAT0'
>  linux.hotplug_type = 4 (0x4)
>  battery.charge_level.percentage = 100 (0x64)
>  battery.charge_level.rate = 0 (0x0)
>  battery.charge_level.last_full = 76152896 (0x48a0040)
>  battery.charge_level.current = 76152896 (0x48a0040)
>  battery.voltage.current = 16759 (0x4177)
>  battery.reporting.rate = 0 (0x0)
>  battery.reporting.current = 4544 (0x11c0)
>  battery.rechargeable.is_discharging = false
>  battery.rechargeable.is_charging = false
>  battery.is_rechargeable = true
>  battery.charge_level.unit = 'mWh'
>  battery.charge_level.granularity_2 = 108536 (0x1a7f8)
>  battery.charge_level.granularity_1 = 1926514 (0x1d6572)
>  battery.charge_level.low = 3079709 (0x2efe1d)
>  battery.charge_level.warning = 6159418 (0x5dfc3a)
>  battery.charge_level.design = 59694800 (0x38eded0)
>  battery.voltage.design = 13567 (0x34ff)
>  battery.voltage.unit = 'mV'
>  battery.reporting.granularity_2 = 8 (0x8)
>  battery.reporting.granularity_1 = 142 (0x8e)
>  battery.reporting.low = 227 (0xe3)
>  battery.reporting.warning = 454 (0x1c6)
>  battery.reporting.design = 4400 (0x1130)
>  battery.reporting.last_full = 4544 (0x11c0)
>  battery.reporting.unit = 'mAh'
>  battery.technology = 'LiON'
>  battery.serial = '00001'
>  battery.model = 'P71'
>  battery.vendor = 'OEM'
>  battery.present = true
>  info.capabilities = { 'battery' }
>  info.category = 'battery'
>  battery.type = 'primary'
>  info.product = 'Battery Bay'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 0 (0x0)
>  linux.acpi_path = '/proc/acpi/battery/BAT0'
>
>  7: udi = '/org/freedesktop/Hal/devices/volume_uuid_C4E49A63E49A580E'
>  volume.policy.desired_mount_point = 'Local hard disc'
>  volume.policy.mount_filesystem = 'ntfs'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_C4E49A63E49A580E'
>  volume.partition.msdos_part_table_type = 7 (0x7)
>  info.product = 'Local hard disc'
>  volume.size = 32210164224ull (0x77fe01a00ull)
>  volume.num_blocks = 62910477 (0x3bff00d)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 1 (0x1)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = 'Local hard disc'
>  volume.uuid = 'C4E49A63E49A580E'
>  volume.fsversion = '3.1'
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'ntfs'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S082J10Y707746'
>  block.is_volume = true
>  block.minor = 1 (0x1)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda1'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_S082J10Y707746'
>  linux.sysfs_path_device = '/sys/block/sda/sda1'
>  linux.sysfs_path = '/sys/block/sda/sda1'
>
>  8: udi = '/org/freedesktop/Hal/devices/volume_part2_size_2689666560'
>  info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_2689666560'
>  volume.partition.msdos_part_table_type = 130 (0x82)
>  info.product = 'Volume (swap)'
>  volume.size = 2689666560ull (0xa0510e00ull)
>  volume.num_blocks = 5253255 (0x502887)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 2 (0x2)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = ''
>  volume.fsversion = '2'
>  volume.fsusage = 'other'
>  volume.fstype = 'swap'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S082J10Y707746'
>  block.is_volume = true
>  block.minor = 2 (0x2)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda2'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_S082J10Y707746'
>  linux.sysfs_path_device = '/sys/block/sda/sda2'
>  linux.sysfs_path = '/sys/block/sda/sda2'
>
>  9: udi = '/org/freedesktop/Hal/devices/volume_uuid_10fac02a_6a2c_4b62_b5c8_b3f2753d0537'
>  volume.policy.desired_mount_point = 'scsidisk'
>  volume.policy.mount_filesystem = 'ext3'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_10fac02a_6a2c_4b62_b5c8_b3f2753d0537'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (ext3)'
>  volume.size = 10742215680ull (0x280493400ull)
>  volume.num_blocks = 20980890 (0x140249a)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 3 (0x3)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = true
>  volume.mount_point = '/'
>  volume.label = ''
>  volume.uuid = '10fac02a-6a2c-4b62-b5c8-b3f2753d0537'
>  volume.fsversion = ''
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'ext3'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S082J10Y707746'
>  block.is_volume = true
>  block.minor = 3 (0x3)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda3'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_S082J10Y707746'
>  linux.sysfs_path_device = '/sys/block/sda/sda3'
>  linux.sysfs_path = '/sys/block/sda/sda3'
>
>  10: udi = '/org/freedesktop/Hal/devices/volume_uuid_b5898f8b_8264_42ec_8b14_a259ad041583'
>  volume.policy.desired_mount_point = 'scsidisk'
>  volume.policy.mount_filesystem = 'ext3'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_b5898f8b_8264_42ec_8b14_a259ad041583'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (ext3)'
>  volume.size = 34381670400ull (0x8014ea800ull)
>  volume.num_blocks = 67151700 (0x400a754)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 4 (0x4)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = true
>  volume.mount_point = '/home'
>  volume.label = ''
>  volume.uuid = 'b5898f8b-8264-42ec-8b14-a259ad041583'
>  volume.fsversion = ''
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'ext3'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S082J10Y707746'
>  block.is_volume = true
>  block.minor = 4 (0x4)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda4'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_S082J10Y707746'
>  linux.sysfs_path_device = '/sys/block/sda/sda4'
>  linux.sysfs_path = '/sys/block/sda/sda4'
>
>  11: udi = '/org/freedesktop/Hal/devices/storage_serial_S082J10Y707746'
>  storage.policy.should_mount = false
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S082J10Y707746'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_S082J10Y707746'
>  storage.serial = 'S082J10Y707746'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  info.product = 'SAMSUNG HM080JI'
>  info.vendor = 'ATA'
>  storage.removable = false
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_1106_3249_scsi_host_0_scsi_device_lun0'
>  storage.lun = 0 (0x0)
>  storage.drive_type = 'disk'
>  storage.vendor = 'ATA'
>  storage.model = 'SAMSUNG HM080JI'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = false
>  storage.bus = 'scsi'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 8 (0x8)
>  block.device = '/dev/sda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3249_scsi_host_0_scsi_device_lun0'
>  linux.sysfs_path_device = '/sys/block/sda'
>  linux.sysfs_path = '/sys/block/sda'
>
>  12: udi = '/org/freedesktop/Hal/devices/storage_serial_K0056OC0352'
>  info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' }
>  resmgr.class = 'cdrom'
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' }
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrecorder'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_K0056OC0352'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_K0056OC0352'
>  storage.cdrom.write_speed = 4234 (0x108a)
>  storage.cdrom.read_speed = 4234 (0x108a)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = true
>  storage.cdrom.dvdplusrw = true
>  storage.cdrom.dvdplusr = true
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = true
>  storage.cdrom.dvd = true
>  storage.cdrom.cdrw = true
>  storage.cdrom.cdr = true
>  storage.firmware_version = '0W34'
>  storage.serial = 'K0056OC0352'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'HL-DT-ST DVD-RW GCA-4080N'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'HL-DT-ST DVD-RW GCA-4080N'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'
>  linux.sysfs_path_device = '/sys/block/hda'
>  linux.sysfs_path = '/sys/block/hda'
>
>  13: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_0_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_0_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux-0 Port'
>  serio.description = 'i8042 Aux-0 Port'
>  serio.id = 'serio0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
>
>  14: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_1_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_1_Port_logicaldev_input'
>  input.product = 'SynPS/2 Synaptics TouchPad'
>  info.product = 'SynPS/2 Synaptics TouchPad'
>  linux.device_file = '/dev/input/event2'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event2'
>  info.capabilities = { 'input', 'input.tablet' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/computer_i8042_Aux_1_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/computer_i8042_Aux_1_Port'
>  linux.sysfs_path = '/sys/class/input/event2'
>
>  15: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_1_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_1_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux-1 Port'
>  serio.description = 'i8042 Aux-1 Port'
>  serio.id = 'serio1'
>  info.linux.driver = 'psmouse'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
>
>  16: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_2_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_2_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux-2 Port'
>  serio.description = 'i8042 Aux-2 Port'
>  serio.id = 'serio2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio2'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio2'
>
>  17: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_3_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_3_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux-3 Port'
>  serio.description = 'i8042 Aux-3 Port'
>  serio.id = 'serio3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio3'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio3'
>
>  18: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input'
>  input.product = 'AT Translated Set 2 keyboard'
>  info.product = 'AT Translated Set 2 keyboard'
>  linux.device_file = '/dev/input/event1'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event1'
>  info.capabilities = { 'input', 'input.keyboard' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  input.physical_device = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.sysfs_path = '/sys/class/input/event1'
>
>  19: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Kbd Port'
>  serio.description = 'i8042 Kbd Port'
>  serio.id = 'serio4'
>  info.linux.driver = 'atkbd'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio4'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio4'
>
>  20: udi = '/org/freedesktop/Hal/devices/pci_8086_2590'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2590'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = 'Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller'
>  pci.product = 'Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9616 (0x2590)
>  info.linux.driver = 'agpgart-intel'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>
>  21: udi = '/org/freedesktop/Hal/devices/pci_10de_c8'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_c8'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = 'NV41.8 [GeForce Go 6800]'
>  pci.product = 'NV41.8 [GeForce Go 6800]'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 3 (0x3)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 200 (0xc8)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:03:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2591'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:03:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:03:00.0'
>
>  22: udi = '/org/freedesktop/Hal/devices/pci_8086_2591'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2591'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'Mobile 915GM/PM Express PCI Express Root Port'
>  pci.product = 'Mobile 915GM/PM Express PCI Express Root Port'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9617 (0x2591)
>  info.linux.driver = 'pcieport-driver'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>
>  23: udi = '/org/freedesktop/Hal/devices/pci_8086_2668'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2668'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9832 (0x2668)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1b.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0'
>
>  24: udi = '/org/freedesktop/Hal/devices/pci_8086_2660'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2660'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9824 (0x2660)
>  info.linux.driver = 'pcieport-driver'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0'
>
>  25: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.0'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0'
>
>  26: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.0'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2658'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1'
>
>  27: udi = '/org/freedesktop/Hal/devices/pci_8086_2658'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2658'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9816 (0x2658)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0'
>
>  28: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.1'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0'
>
>  29: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.1'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2659'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2'
>
>  30: udi = '/org/freedesktop/Hal/devices/pci_8086_2659'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2659'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9817 (0x2659)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1'
>
>  31: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.2'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 3 (0x3)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0'
>
>  32: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 3 (0x3)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.2'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265a'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3'
>
>  33: udi = '/org/freedesktop/Hal/devices/pci_8086_265a'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265a'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9818 (0x265a)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2'
>
>  34: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.3'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = false
>  usb.bus_number = 4 (0x4)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0'
>
>  35: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 4 (0x4)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:1d.3'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13.3-2-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265b'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4'
>
>  36: udi = '/org/freedesktop/Hal/devices/pci_8086_265b'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265b'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9819 (0x265b)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3'
>
>  37: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 1 (0x1)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13.3-2-default ehci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 8 (0x8)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:1d.7'
>  usb.speed_bcd = 294912 (0x48000)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 5 (0x5)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0'
>
>  38: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 5 (0x5)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 512 (0x200)
>  usb_device.speed_bcd = 294912 (0x48000)
>  usb_device.serial = '0000:00:1d.7'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 8 (0x8)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'EHCI Host Controller'
>  usb_device.product = 'EHCI Host Controller'
>  info.vendor = 'Linux 2.6.13.3-2-default ehci_hcd'
>  usb_device.vendor = 'Linux 2.6.13.3-2-default ehci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 1 (0x1)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_265c'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5'
>
>  39: udi = '/org/freedesktop/Hal/devices/pci_8086_265c'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_265c'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 32 (0x20)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9820 (0x265c)
>  info.linux.driver = 'ehci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7'
>
>  40: udi = '/org/freedesktop/Hal/devices/pci_8086_4220'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_4220'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x2702)'
>  pci.subsys_vendor = 'Intel Corporation'
>  info.product = 'PRO/Wireless 2200BG'
>  pci.product = 'PRO/Wireless 2200BG'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 128 (0x80)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 32902 (0x8086)
>  pci.subsys_product_id = 9986 (0x2702)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 16928 (0x4220)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:03.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:03.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:03.0'
>
>  41: udi = '/org/freedesktop/Hal/devices/ieee1394_guid_30d4971e177bd'
>  info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid_30d4971e177bd'
>  linux.subsystem = 'ieee1394'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Unknown (0x00030d)'
>  info.vendor = 'Unknown (0x00030d)'
>  ieee1394.product = 'Unknown (0x00030d)'
>  ieee1394.product_id = 0 (0x0)
>  ieee1394.vendor = 'Unknown (0x00030d)'
>  ieee1394.version = 1 (0x1)
>  ieee1394.specifier_id = 94 (0x5e)
>  ieee1394.vendor_id = 781 (0x30d)
>  ieee1394.guid = 859034024507325ull (0x30d4971e177bdull)
>  info.parent = '/org/freedesktop/Hal/devices/pci_104c_8023'
>  info.bus = 'ieee1394'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:04.0/fw-host0/00030d4971e177bd/00030d4971e177bd-0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:04.0/fw-host0/00030d4971e177bd/00030d4971e177bd-0'
>
>  42: udi = '/org/freedesktop/Hal/devices/pci_104c_8023'
>  info.udi = '/org/freedesktop/Hal/devices/pci_104c_8023'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = 'TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)'
>  pci.product = 'TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)'
>  info.vendor = 'Texas Instruments'
>  pci.vendor = 'Texas Instruments'
>  pci.device_protocol = 16 (0x10)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 4172 (0x104c)
>  pci.product_id = 32803 (0x8023)
>  info.linux.driver = 'ohci1394'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:04.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:04.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:04.0'
>
>  43: udi = '/org/freedesktop/Hal/devices/net_00_03_0d_30_a6_fd'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_03_0d_30_a6_fd'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 13106194173ull (0x30d30a6fdull)
>  info.product = 'Networking Interface'
>  net.interface_up = true
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 3 (0x3)
>  net.address = '00:03:0d:30:a6:fd'
>  net.interface = 'eth0'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_10ec_8169'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8169'
>  linux.sysfs_path = '/sys/class/net/eth0'
>
>  44: udi = '/org/freedesktop/Hal/devices/pci_10ec_8169'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8169'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = 'RTL-8169 Gigabit Ethernet'
>  pci.product = 'RTL-8169 Gigabit Ethernet'
>  info.vendor = 'Realtek Semiconductor Co., Ltd.'
>  pci.vendor = 'Realtek Semiconductor Co., Ltd.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 4332 (0x10ec)
>  pci.product_id = 33129 (0x8169)
>  info.linux.driver = 'r8169'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:05.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:05.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:05.0'
>
>  45: udi = '/org/freedesktop/Hal/devices/pci_1106_3249_scsi_host_0_scsi_device_lun0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3249_scsi_host_0_scsi_device_lun0'
>  linux.subsystem = 'scsi'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'SCSI Device'
>  info.linux.driver = 'sd'
>  scsi.lun = 0 (0x0)
>  scsi.target = 0 (0x0)
>  scsi.bus = 0 (0x0)
>  scsi.host = 0 (0x0)
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3249_scsi_host_0'
>  info.bus = 'scsi'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.0/host0/target0:0:0/0:0:0:0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.0/host0/target0:0:0/0:0:0:0'
>
>  46: udi = '/org/freedesktop/Hal/devices/pci_1106_3249_scsi_host_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3249_scsi_host_0'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 0 (0x0)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3249'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.0/host0'
>  linux.sysfs_path = '/sys/class/scsi_host/host0'
>
>  47: udi = '/org/freedesktop/Hal/devices/pci_1106_3249_scsi_host'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3249_scsi_host'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 1 (0x1)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3249'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.0/host1'
>  linux.sysfs_path = '/sys/class/scsi_host/host1'
>
>  48: udi = '/org/freedesktop/Hal/devices/pci_1106_3249'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3249'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = 'VT6421 IDE RAID Controller'
>  pci.product = 'VT6421 IDE RAID Controller'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12873 (0x3249)
>  info.linux.driver = 'sata_via'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:01:07.0'
>
>  49: udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = '82801 Mobile PCI Bridge'
>  pci.product = '82801 Mobile PCI Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 1 (0x1)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9288 (0x2448)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>
>  50: udi = '/org/freedesktop/Hal/devices/pci_8086_2641'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2641'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = '82801FBM (ICH6M) LPC Interface Bridge'
>  pci.product = '82801FBM (ICH6M) LPC Interface Bridge'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9793 (0x2641)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0'
>
>  51: udi = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f_ide_0_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_8086_266f'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/ide0/0.0'
>
>  52: udi = '/org/freedesktop/Hal/devices/pci_8086_266f'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266f'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 138 (0x8a)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9839 (0x266f)
>  info.linux.driver = 'PIIX_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1'
>
>  53: udi = '/org/freedesktop/Hal/devices/pci_8086_266a'
>  info.udi = '/org/freedesktop/Hal/devices/pci_8086_266a'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x107c)'
>  pci.subsys_vendor = 'Fujitsu Siemens Computer GmbH'
>  info.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller'
>  pci.product = '82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller'
>  info.vendor = 'Intel Corporation'
>  pci.vendor = 'Intel Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 5 (0x5)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 5940 (0x1734)
>  pci.subsys_product_id = 4220 (0x107c)
>  pci.vendor_id = 32902 (0x8086)
>  pci.product_id = 9834 (0x266a)
>  info.linux.driver = 'i801_smbus'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3'
>
>  54: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01_0'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'System Board'
>  pnp.description = 'System Board'
>  pnp.id = 'PNP0c01'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:00'
>  linux.sysfs_path = '/sys/devices/pnp0/00:00'
>
>  55: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT DMA Controller'
>  pnp.description = 'AT DMA Controller'
>  pnp.id = 'PNP0200'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:01'
>  linux.sysfs_path = '/sys/devices/pnp0/00:01'
>
>  56: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT Real-Time Clock'
>  pnp.description = 'AT Real-Time Clock'
>  pnp.id = 'PNP0b00'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:02'
>  linux.sysfs_path = '/sys/devices/pnp0/00:02'
>
>  57: udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0303'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
>  pnp.id = 'PNP0303'
>  info.linux.driver = 'i8042 kbd'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:03'
>  linux.sysfs_path = '/sys/devices/pnp0/00:03'
>
>  58: udi = '/org/freedesktop/Hal/devices/pnp_SYN0802'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_SYN0802'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PnP Device (SYN0802)'
>  pnp.id = 'SYN0802'
>  info.linux.driver = 'i8042 aux'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:04'
>  linux.sysfs_path = '/sys/devices/pnp0/00:04'
>
>  59: udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT-style speaker sound'
>  pnp.description = 'AT-style speaker sound'
>  pnp.id = 'PNP0800'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:05'
>  linux.sysfs_path = '/sys/devices/pnp0/00:05'
>
>  60: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Math Coprocessor'
>  pnp.description = 'Math Coprocessor'
>  pnp.id = 'PNP0c04'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:06'
>  linux.sysfs_path = '/sys/devices/pnp0/00:06'
>
>  61: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:07'
>  linux.sysfs_path = '/sys/devices/pnp0/00:07'
>
>  62: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:08'
>  linux.sysfs_path = '/sys/devices/pnp0/00:08'
>
>  63: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:09'
>  linux.sysfs_path = '/sys/devices/pnp0/00:09'
>
>  64: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c14'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c14'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'PnP Device (PNP0c14)'
>  pnp.id = 'PNP0c14'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0a'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0a'
>
>  65: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'System Board'
>  pnp.description = 'System Board'
>  pnp.id = 'PNP0c01'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0b'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0b'
>
>  66: udi = '/org/freedesktop/Hal/devices/computer'
>  storage.policy.default.mount_option.exec = true
>  storage.policy.default.mount_option.pamconsole = true
>  storage.policy.default.mount_option.noauto = true
>  storage.policy.default.managed_keyword.secondary = 'kudzu'
>  storage.policy.default.managed_keyword.primary = 'managed'
>  storage.policy.default.use_managed_keyword = true
>  storage.policy.default.mount_root = '/media'
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-set-power-save' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', 'b' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'SetPowerSave' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
>  info.addons = { 'hald-addon-acpi' }
>  power_management.acpi.linux.version = '20050408'
>  power_management.type = 'acpi'
>  power_management.is_enabled = true
>  system.formfactor = 'unknown'
>  system.kernel.machine = 'i686'
>  system.kernel.version = '2.6.13.3-2-default'
>  system.kernel.name = 'Linux'
>  info.udi = '/org/freedesktop/Hal/devices/computer'
>  info.product = 'Computer'
>  linux.sysfs_path_device = '(none)'
>  info.bus = 'unknown'
>----- hal device list end -----
>>> floppy.1: get nvram
>>> floppy.2: klog info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>/dev/mem[0x400, 256]: mmap(, 4096,,,, 0x0) ok
>/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok
>  bios: 1 disks
>  bios: 637k low mem
>/dev/mem[0x9fc00, 1]: mmap(, 4096,,,, 0x9f000) ok
>/dev/mem[0x9fc00, 1024]: mmap(, 4096,,,, 0x9f000) ok
>  bios: EBDA 0x00400 bytes at 0x9fc00
>>> bios.2: rom
>----- SMBIOS Entry Point 0xf9540 - 0xf955e -----
>  f9540  5f 53 4d 5f c2 1f 02 03 bc 00 00 00 00 00 00 00  "_SM_............"
>  f9550  5f 44 4d 49 5f 9e 01 07 c0 a3 0f 00 2d 00 23  "_DMI_.......-.#"
>----- SMBIOS Entry Point end -----
>/dev/mem[0xfa3c0, 1793]: mmap(, 4096,,,, 0xfa000) ok
>----- SMBIOS Structure Table 0xfa3c0 - 0xfaac0 -----
>  fa3c0  00 14 00 00 01 02 00 f0 03 07 90 de 8b 7f 01 00  "................"
>  fa3d0  00 00 33 01 41 6d 65 72 69 63 61 6e 20 4d 65 67  "..3.American Meg"
>  fa3e0  61 74 72 65 6e 64 73 20 49 6e 63 2e 00 31 2e 30  "atrends Inc..1.0"
>  fa3f0  31 43 20 20 00 30 34 2f 32 39 2f 32 30 30 35 00  "1C  .04/29/2005."
>  fa400  00 01 19 01 00 01 02 03 04 cc d9 4f 83 74 fe d5  "...........O.t.."
>  fa410  11 bb 01 89 37 50 cb de d9 06 46 55 4a 49 54 53  "....7P....FUJITS"
>  fa420  55 20 53 49 45 4d 45 4e 53 00 41 6d 69 6c 6f 20  "U SIEMENS.Amilo "
>  fa430  4d 33 34 33 38 20 53 65 72 69 65 73 00 20 20 20  "M3438 Series.   "
>  fa440  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fa450  20 20 20 20 20 20 20 20 20 20 20 20 20 00 37 31  "             .71"
>  fa460  45 42 37 39 43 30 00 00 02 0f 02 00 01 02 03 04  "EB79C0.........."
>  fa470  05 09 06 03 00 0a 00 20 20 20 20 20 20 20 20 20  ".......         "
>  fa480  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fa490  20 20 20 20 20 20 20 00 50 37 31 45 4e 30 00 20  "       .P71EN0. "
>  fa4a0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fa4b0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 00  "               ."
>  fa4c0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fa4d0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fa4e0  00 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  ".               "
>  fa4f0  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fa500  20 00 20 20 20 20 20 20 20 20 20 20 20 20 20 20  " .              "
>  fa510  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fa520  20 20 00 00 03 15 03 00 01 0a 02 03 04 03 03 03  "  .............."
>  fa530  03 00 00 00 00 00 01 00 00 46 55 4a 49 54 53 55  ".........FUJITSU"
>  fa540  20 53 49 45 4d 45 4e 53 00 20 20 20 20 20 20 20  " SIEMENS.       "
>  fa550  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fa560  20 20 20 20 20 20 20 20 20 00 20 20 20 20 20 20  "         .      "
>  fa570  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fa580  20 20 20 20 20 20 20 20 20 20 00 20 20 20 20 20  "          .     "
>  fa590  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20  "                "
>  fa5a0  20 20 20 20 20 20 20 20 20 20 20 00 00 04 23 04  "           ...#."
>  fa5b0  00 01 03 01 02 d8 06 00 00 ff fb e9 af 03 06 14  "................"
>  fa5c0  02 46 07 46 07 41 01 05 00 06 00 07 00 04 05 06  ".F.F.A.........."
>  fa5d0  43 50 55 20 31 00 49 6e 74 65 6c 20 20 20 20 20  "CPU 1.Intel     "
>  fa5e0  20 20 20 20 20 20 20 00 49 6e 74 65 6c 28 52 29  "       .Intel(R)"
>  fa5f0  20 50 65 6e 74 69 75 6d 28 52 29 20 4d 20 70 72  " Pentium(R) M pr"
>  fa600  6f 63 65 73 73 6f 72 20 37 35 30 20 20 20 20 20  "ocessor 750     "
>  fa610  20 20 20 20 20 20 20 20 20 20 20 20 00 54 6f 20  "            .To "
>  fa620  42 65 20 46 69 6c 6c 65 64 20 42 79 20 4f 2e 45  "Be Filled By O.E"
>  fa630  2e 4d 2e 00 54 6f 20 42 65 20 46 69 6c 6c 65 64  ".M..To Be Filled"
>  fa640  20 42 79 20 4f 2e 45 2e 4d 2e 00 54 6f 20 42 65  " By O.E.M..To Be"
>  fa650  20 46 69 6c 6c 65 64 20 42 79 20 4f 2e 45 2e 4d  " Filled By O.E.M"
>  fa660  2e 00 00 07 13 05 00 01 80 02 20 00 20 00 10 00  ".......... . ..."
>  fa670  10 00 00 05 04 05 4c 31 2d 43 61 63 68 65 00 00  "......L1-Cache.."
>  fa680  07 13 06 00 01 81 02 00 08 00 08 10 00 10 00 00  "................"
>  fa690  05 05 05 4c 32 2d 43 61 63 68 65 00 00 07 13 07  "...L2-Cache....."
>  fa6a0  00 01 02 03 00 00 00 00 02 00 02 00 00 02 02 02  "................"
>  fa6b0  4c 33 2d 43 61 63 68 65 00 00 08 09 08 00 01 00  "L3-Cache........"
>  fa6c0  02 0f 0e 4a 31 41 31 00 50 53 32 4d 6f 75 73 65  "...J1A1.PS2Mouse"
>  fa6d0  00 00 08 09 09 00 01 00 02 0f 0d 4a 31 41 31 00  "...........J1A1."
>  fa6e0  4b 65 79 62 6f 61 72 64 00 00 08 09 0a 00 01 00  "Keyboard........"
>  fa6f0  02 12 10 4a 32 41 32 00 55 53 42 31 00 00 08 09  "...J2A2.USB1...."
>  fa700  0b 00 01 00 02 12 10 4a 32 41 32 00 55 53 42 32  ".......J2A2.USB2"
>  fa710  00 00 08 09 0c 00 01 00 02 04 05 4a 34 41 31 00  "...........J4A1."
>  fa720  4c 50 54 20 31 00 00 08 09 0d 00 01 00 02 08 09  "LPT 1..........."
>  fa730  4a 32 41 31 00 43 4f 4d 20 41 00 00 08 09 0e 00  "J2A1.COM A......"
>  fa740  01 00 02 1f 1d 4a 36 41 31 00 41 75 64 69 6f 20  ".....J6A1.Audio "
>  fa750  4d 69 63 20 49 6e 00 00 08 09 0f 00 01 00 02 1f  "Mic In.........."
>  fa760  1d 4a 36 41 31 00 41 75 64 69 6f 20 4c 69 6e 65  ".J6A1.Audio Line"
>  fa770  20 49 6e 00 00 08 09 10 00 01 1c 00 00 1d 4a 36  " In...........J6"
>  fa780  42 31 20 2d 20 41 55 58 20 49 4e 00 00 08 09 11  "B1 - AUX IN....."
>  fa790  00 01 1c 00 00 1d 4a 36 42 32 20 2d 20 43 44 49  "......J6B2 - CDI"
>  fa7a0  4e 00 00 08 09 12 00 01 16 00 00 ff 4a 36 4a 32  "N...........J6J2"
>  fa7b0  20 2d 20 50 52 49 20 49 44 45 00 00 08 09 13 00  " - PRI IDE......"
>  fa7c0  01 16 00 00 ff 4a 36 4a 31 20 2d 20 53 45 43 20  ".....J6J1 - SEC "
>  fa7d0  49 44 45 00 00 08 09 14 00 01 17 00 00 ff 4a 34  "IDE...........J4"
>  fa7e0  4a 31 20 2d 20 46 4c 4f 50 50 59 00 00 08 09 15  "J1 - FLOPPY....."
>  fa7f0  00 01 18 00 00 ff 4a 39 48 31 20 2d 20 46 52 4f  "......J9H1 - FRO"
>  fa800  4e 54 20 50 4e 4c 00 00 08 09 16 00 01 ff 00 00  "NT PNL.........."
>  fa810  ff 4a 31 42 31 20 2d 20 43 48 41 53 53 49 53 20  ".J1B1 - CHASSIS "
>  fa820  52 45 41 52 20 46 41 4e 00 00 08 09 17 00 01 ff  "REAR FAN........"
>  fa830  00 00 ff 4a 32 46 31 20 2d 20 43 50 55 20 46 41  "...J2F1 - CPU FA"
>  fa840  4e 00 00 08 09 18 00 01 ff 00 00 ff 4a 38 42 34  "N...........J8B4"
>  fa850  20 2d 20 46 52 4f 4e 54 20 46 41 4e 00 00 08 09  " - FRONT FAN...."
>  fa860  19 00 01 ff 00 00 ff 4a 39 47 32 20 2d 20 46 4e  ".......J9G2 - FN"
>  fa870  54 20 55 53 42 00 00 08 09 1a 00 01 ff 00 00 ff  "T USB..........."
>  fa880  4a 36 43 33 20 2d 20 46 50 20 41 55 44 00 00 08  "J6C3 - FP AUD..."
>  fa890  09 1b 00 01 ff 00 00 ff 4a 39 47 31 20 2d 20 43  "........J9G1 - C"
>  fa8a0  4f 4e 46 49 47 00 00 08 09 1c 00 01 ff 00 00 ff  "ONFIG..........."
>  fa8b0  4a 38 43 31 20 2d 20 53 43 53 49 20 4c 45 44 00  "J8C1 - SCSI LED."
>  fa8c0  00 08 09 1d 00 01 ff 00 00 ff 4a 39 4a 32 20 2d  "..........J9J2 -"
>  fa8d0  20 49 4e 54 52 55 44 45 52 00 00 08 09 1e 00 01  " INTRUDER......."
>  fa8e0  ff 00 00 ff 4a 39 47 34 20 2d 20 49 54 50 00 00  "....J9G4 - ITP.."
>  fa8f0  08 09 1f 00 01 ff 00 00 ff 4a 32 48 31 20 2d 20  ".........J2H1 - "
>  fa900  4d 41 49 4e 20 50 4f 57 45 52 00 00 09 0d 20 00  "MAIN POWER.... ."
>  fa910  01 11 05 04 03 00 00 0c 01 41 47 50 00 00 09 0d  ".........AGP...."
>  fa920  21 00 01 06 05 03 03 01 00 0c 01 50 43 49 31 00  "!..........PCI1."
>  fa930  00 0a 06 22 00 83 01 20 20 54 6f 20 42 65 20 46  "..."...  To Be F"
>  fa940  69 6c 6c 65 64 20 42 79 20 4f 2e 45 2e 4d 2e 00  "illed By O.E.M.."
>  fa950  00 0d 16 23 00 01 ff 00 00 00 00 00 00 00 00 00  "...#............"
>  fa960  00 00 00 00 00 00 01 65 6e 7c 55 53 7c 69 73 6f  ".......en|US|iso"
>  fa970  38 38 35 39 2d 31 00 00 0f 37 24 00 f0 03 10 18  "8859-1...7$....."
>  fa980  20 18 04 01 00 00 00 00 02 00 00 00 01 09 02 01  " ..............."
>  fa990  03 02 03 03 02 05 02 08 04 09 03 0a 03 10 06 90  "................"
>  fa9a0  04 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 00  "................"
>  fa9b0  00 10 0f 25 00 03 03 03 00 00 40 00 fe ff 02 00  "...%......@....."
>  fa9c0  00 00 13 0f 26 00 00 00 00 00 00 00 08 00 25 00  "....&.........%."
>  fa9d0  04 00 00 11 1b 27 00 25 00 fe ff 40 00 40 00 00  ".....'.%...@.@.."
>  fa9e0  01 09 00 01 02 0f 80 00 00 00 03 04 05 06 44 49  "..............DI"
>  fa9f0  4d 4d 30 00 42 41 4e 4b 30 00 4d 61 6e 75 66 61  "MM0.BANK0.Manufa"
>  faa00  63 74 75 72 65 72 30 00 53 65 72 4e 75 6d 30 00  "cturer0.SerNum0."
>  faa10  41 73 73 65 74 54 61 67 4e 75 6d 30 00 50 61 72  "AssetTagNum0.Par"
>  faa20  74 4e 75 6d 30 00 00 14 13 28 00 00 00 00 00 ff  "tNum0....(......"
>  faa30  ff 03 00 27 00 26 00 01 00 01 00 00 11 1b 29 00  "...'.&........)."
>  faa40  25 00 fe ff ff ff 40 00 00 00 09 00 01 02 02 04  "%.....@........."
>  faa50  00 00 00 03 04 05 06 44 49 4d 4d 31 00 42 41 4e  ".......DIMM1.BAN"
>  faa60  4b 31 00 4d 61 6e 75 66 61 63 74 75 72 65 72 31  "K1.Manufacturer1"
>  faa70  00 53 65 72 4e 75 6d 31 00 41 73 73 65 74 54 61  ".SerNum1.AssetTa"
>  faa80  67 4e 75 6d 31 00 50 61 72 74 4e 75 6d 31 00 00  "gNum1.PartNum1.."
>  faa90  7e 13 2a 00 00 00 00 00 00 00 00 00 29 00 26 00  "~.*.........).&."
>  faaa0  01 00 00 00 00 20 14 2b 00 00 00 00 00 00 00 00  "..... .+........"
>  faab0  00 00 00 00 00 00 00 00 00 00 00 7f 04 2c 00 00  ".............,.."
>  faac0  00  "."
>----- SMBIOS Structure Table end -----
>  type 0x00 [0x0000]: 00 14 00 00 01 02 00 f0 03 07 90 de 8b 7f 01 00 00 00 33 01
>       str1: "American Megatrends Inc."
>       str2: "1.01C"
>       str3: "04/29/2005"
>  type 0x01 [0x0001]: 01 19 01 00 01 02 03 04 cc d9 4f 83 74 fe d5 11 bb 01 89 37 50 cb de d9 06
>       str1: "FUJITSU SIEMENS"
>       str2: "Amilo M3438 Series"
>       str4: "71EB79C0"
>  type 0x02 [0x0002]: 02 0f 02 00 01 02 03 04 05 09 06 03 00 0a 00
>       str2: "P71EN0"
>  type 0x03 [0x0003]: 03 15 03 00 01 0a 02 03 04 03 03 03 03 00 00 00 00 00 01 00 00
>       str1: "FUJITSU SIEMENS"
>  type 0x04 [0x0004]: 04 23 04 00 01 03 01 02 d8 06 00 00 ff fb e9 af 03 06 14 02 46 07 46 07 41 01 05 00 06 00 07 00 04 05 06
>       str1: "CPU 1"
>       str2: "Intel"
>       str3: "Intel(R) Pentium(R) M processor 750"
>       str4: "To Be Filled By O.E.M."
>       str5: "To Be Filled By O.E.M."
>       str6: "To Be Filled By O.E.M."
>  type 0x07 [0x0005]: 07 13 05 00 01 80 02 20 00 20 00 10 00 10 00 00 05 04 05
>       str1: "L1-Cache"
>  type 0x07 [0x0006]: 07 13 06 00 01 81 02 00 08 00 08 10 00 10 00 00 05 05 05
>       str1: "L2-Cache"
>  type 0x07 [0x0007]: 07 13 07 00 01 02 03 00 00 00 00 02 00 02 00 00 02 02 02
>       str1: "L3-Cache"
>  type 0x08 [0x0008]: 08 09 08 00 01 00 02 0f 0e
>       str1: "J1A1"
>       str2: "PS2Mouse"
>  type 0x08 [0x0009]: 08 09 09 00 01 00 02 0f 0d
>       str1: "J1A1"
>       str2: "Keyboard"
>  type 0x08 [0x000a]: 08 09 0a 00 01 00 02 12 10
>       str1: "J2A2"
>       str2: "USB1"
>  type 0x08 [0x000b]: 08 09 0b 00 01 00 02 12 10
>       str1: "J2A2"
>       str2: "USB2"
>  type 0x08 [0x000c]: 08 09 0c 00 01 00 02 04 05
>       str1: "J4A1"
>       str2: "LPT 1"
>  type 0x08 [0x000d]: 08 09 0d 00 01 00 02 08 09
>       str1: "J2A1"
>       str2: "COM A"
>  type 0x08 [0x000e]: 08 09 0e 00 01 00 02 1f 1d
>       str1: "J6A1"
>       str2: "Audio Mic In"
>  type 0x08 [0x000f]: 08 09 0f 00 01 00 02 1f 1d
>       str1: "J6A1"
>       str2: "Audio Line In"
>  type 0x08 [0x0010]: 08 09 10 00 01 1c 00 00 1d
>       str1: "J6B1 - AUX IN"
>  type 0x08 [0x0011]: 08 09 11 00 01 1c 00 00 1d
>       str1: "J6B2 - CDIN"
>  type 0x08 [0x0012]: 08 09 12 00 01 16 00 00 ff
>       str1: "J6J2 - PRI IDE"
>  type 0x08 [0x0013]: 08 09 13 00 01 16 00 00 ff
>       str1: "J6J1 - SEC IDE"
>  type 0x08 [0x0014]: 08 09 14 00 01 17 00 00 ff
>       str1: "J4J1 - FLOPPY"
>  type 0x08 [0x0015]: 08 09 15 00 01 18 00 00 ff
>       str1: "J9H1 - FRONT PNL"
>  type 0x08 [0x0016]: 08 09 16 00 01 ff 00 00 ff
>       str1: "J1B1 - CHASSIS REAR FAN"
>  type 0x08 [0x0017]: 08 09 17 00 01 ff 00 00 ff
>       str1: "J2F1 - CPU FAN"
>  type 0x08 [0x0018]: 08 09 18 00 01 ff 00 00 ff
>       str1: "J8B4 - FRONT FAN"
>  type 0x08 [0x0019]: 08 09 19 00 01 ff 00 00 ff
>       str1: "J9G2 - FNT USB"
>  type 0x08 [0x001a]: 08 09 1a 00 01 ff 00 00 ff
>       str1: "J6C3 - FP AUD"
>  type 0x08 [0x001b]: 08 09 1b 00 01 ff 00 00 ff
>       str1: "J9G1 - CONFIG"
>  type 0x08 [0x001c]: 08 09 1c 00 01 ff 00 00 ff
>       str1: "J8C1 - SCSI LED"
>  type 0x08 [0x001d]: 08 09 1d 00 01 ff 00 00 ff
>       str1: "J9J2 - INTRUDER"
>  type 0x08 [0x001e]: 08 09 1e 00 01 ff 00 00 ff
>       str1: "J9G4 - ITP"
>  type 0x08 [0x001f]: 08 09 1f 00 01 ff 00 00 ff
>       str1: "J2H1 - MAIN POWER"
>  type 0x09 [0x0020]: 09 0d 20 00 01 11 05 04 03 00 00 0c 01
>       str1: "AGP"
>  type 0x09 [0x0021]: 09 0d 21 00 01 06 05 03 03 01 00 0c 01
>       str1: "PCI1"
>  type 0x0a [0x0022]: 0a 06 22 00 83 01
>       str1: "To Be Filled By O.E.M."
>  type 0x0d [0x0023]: 0d 16 23 00 01 ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
>       str1: "en|US|iso8859-1"
>  type 0x0f [0x0024]: 0f 37 24 00 f0 03 10 18 20 18 04 01 00 00 00 00 02 00 00 00 01 09 02 01 03 02 03 03 02 05 02 08 04 09 03 0a 03 10 06 90 04 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>  type 0x10 [0x0025]: 10 0f 25 00 03 03 03 00 00 40 00 fe ff 02 00
>  type 0x13 [0x0026]: 13 0f 26 00 00 00 00 00 00 00 08 00 25 00 04
>  type 0x11 [0x0027]: 11 1b 27 00 25 00 fe ff 40 00 40 00 00 01 09 00 01 02 0f 80 00 00 00 03 04 05 06
>       str1: "DIMM0"
>       str2: "BANK0"
>       str3: "Manufacturer0"
>       str4: "SerNum0"
>       str5: "AssetTagNum0"
>       str6: "PartNum0"
>  type 0x14 [0x0028]: 14 13 28 00 00 00 00 00 ff ff 03 00 27 00 26 00 01 00 01
>  type 0x11 [0x0029]: 11 1b 29 00 25 00 fe ff ff ff 40 00 00 00 09 00 01 02 02 04 00 00 00 03 04 05 06
>       str1: "DIMM1"
>       str2: "BANK1"
>       str3: "Manufacturer1"
>       str4: "SerNum1"
>       str5: "AssetTagNum1"
>       str6: "PartNum1"
>  type 0x7e [0x002a]: 7e 13 2a 00 00 00 00 00 00 00 00 00 29 00 26 00 01 00 00
>  type 0x20 [0x002b]: 20 14 2b 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>  type 0x7f [0x002c]: 7f 04 2c 00
>  smbios: stopped at end tag
>>> bios.3: smp
>  smp: valid MP FP at 0xff780 (size 0x10, rev 4), MP config at 0xfb570
>/dev/mem[0xfb570, 65536]: mmap(, 69632,,,, 0xfb000) ok
>  base MP config table (35 entries):
>  type 0, len 20
>    00 00 14 03 d8 06 00 00 ff fb e9 af 00 00 00 00 00 00 00 00  "...................."
>  type 1, len 8
>    01 00 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 01 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 02 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 03 50 43 49 20 20 20  "..PCI   "
>  type 1, len 8
>    01 04 49 53 41 20 20 20  "..ISA   "
>  type 2, len 8
>    02 01 20 01 00 00 c0 fe  ".. ....."
>  type 3, len 8
>    03 03 00 00 04 00 01 00  "........"
>  type 3, len 8
>    03 00 00 00 04 01 01 01  "........"
>  type 3, len 8
>    03 00 00 00 04 00 01 02  "........"
>  type 3, len 8
>    03 00 00 00 04 04 01 04  "........"
>  type 3, len 8
>    03 00 00 00 04 06 01 06  "........"
>  type 3, len 8
>    03 00 00 00 04 07 01 07  "........"
>  type 3, len 8
>    03 00 05 00 04 08 01 08  "........"
>  type 3, len 8
>    03 00 00 00 04 09 01 09  "........"
>  type 3, len 8
>    03 00 00 00 04 0c 01 0c  "........"
>  type 3, len 8
>    03 00 00 00 04 0d 01 0d  "........"
>  type 3, len 8
>    03 00 00 00 04 0e 01 0e  "........"
>  type 3, len 8
>    03 00 00 00 04 0f 01 0f  "........"
>  type 3, len 8
>    03 00 0f 00 00 7c 01 12  ".....|.."
>  type 3, len 8
>    03 00 0f 00 00 7d 01 13  ".....}.."
>  type 3, len 8
>    03 00 0f 00 00 74 01 17  ".....t.."
>  type 3, len 8
>    03 00 0f 00 00 75 01 13  ".....u.."
>  type 3, len 8
>    03 00 0f 00 00 76 01 12  ".....v.."
>  type 3, len 8
>    03 00 0f 00 00 77 01 10  ".....w.."
>  type 3, len 8
>    03 00 0f 00 00 6c 01 10  ".....l.."
>  type 3, len 8
>    03 00 0f 00 00 70 01 10  ".....p.."
>  type 3, len 8
>    03 00 0f 00 01 0c 01 13  "........"
>  type 3, len 8
>    03 00 0f 00 01 1c 01 10  "........"
>  type 3, len 8
>    03 00 0f 00 01 14 01 13  "........"
>  type 3, len 8
>    03 00 0f 00 01 10 01 12  "........"
>  type 3, len 8
>    03 00 0f 00 03 00 01 10  "........"
>  type 3, len 8
>    03 00 0f 00 00 04 01 10  "........"
>  type 4, len 8
>    04 03 00 00 00 00 ff 00  "........"
>  type 4, len 8
>    04 01 00 00 00 00 ff 01  "........"
>  extended MP config table:
>  type 128, len 20
>    80 14 00 00 00 c0 00 00 00 00 00 00 00 30 00 00 00 00 00 00  ".............0......"
>  type 128, len 20
>    80 14 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00  "...................."
>  type 128, len 20
>    80 14 00 01 00 00 0a 00 00 00 00 00 00 00 02 00 00 00 00 00  "...................."
>  type 128, len 20
>    80 14 00 01 00 00 90 fa 00 00 00 00 00 00 30 04 00 00 00 00  "..............0....."
>  type 128, len 20
>    80 14 00 02 00 00 e0 bf 00 00 00 00 00 00 20 20 00 00 00 00  "..............  ...."
>  type 129, len 8
>    81 08 04 01 00 00 00 00  "........"
>  type 130, len 8
>    82 08 00 00 00 00 00 00  "........"
>  type 130, len 8
>    82 08 00 00 01 00 00 00  "........"
>----- BIOS data 0x00400 - 0x004ff -----
>  400  00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 9f  "................"
>  410  26 00 20 7d 02 91 00 00 00 00 1e 00 1e 00 00 41  "&. }...........A"
>  420  00 41 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ".A.............."
>  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  440  00 00 00 00 00 00 00 00 00 72 80 00 ff ff 00 00  ".........r......"
>  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  00 00 00 d4 03 29 30 00 00 00 00 00 99 eb 16 00  ".....)0........."
>  470  00 00 00 00 00 01 00 00 14 14 14 14 01 01 01 01  "................"
>  480  1e 00 3e 00 2f 10 00 60 09 11 0b 00 00 00 ff 00  "..>./..`........"
>  490  00 00 00 00 00 00 10 10 0c 46 00 cf c0 0e 16 02  ".........F......"
>  4a0  00 00 00 00 00 00 00 00 9a 27 00 c0 00 00 00 00  ".........'......"
>  4b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4e0  04 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- BIOS data end -----
>----- EBDA 0x9fc00 - 0x9ffff -----
>  9fc00  01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc30  00 00 00 00 00 00 00 00 00 00 00 00 00 13 0f ff  "................"
>  9fc40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fc90  02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fca0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcb0  00 00 00 92 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fce0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fcf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fd90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fda0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdd0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fde0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fdf0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fe90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fea0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9feb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fec0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fed0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fee0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fef0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff00  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff10  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff20  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff30  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff40  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff50  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff60  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff80  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ff90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffa0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffb0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffc0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9ffd0  00 00 00 00 00 00 00 00 c5 1d 00 e0 80 c0 05 00  "................"
>  9ffe0  80 f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  9fff0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- EBDA end -----
>/dev/mem[0xff780, 16]: mmap(, 4096,,,, 0xff000) ok
>----- MP FP 0xff780 - 0xff78f -----
>  ff780  5f 4d 50 5f 70 b5 0f 00 01 04 6c 00 00 00 00 00  "_MP_p.....l....."
>----- MP FP end -----
>/dev/mem[0xfb570, 460]: mmap(, 4096,,,, 0xfb000) ok
>----- MP config table 0xfb570 - 0xfb73b -----
>  fb570  50 43 4d 50 50 01 04 f5 54 45 4d 50 4c 41 54 45  "PCMPP...TEMPLATE"
>  fb580  45 54 45 4d 50 4c 41 54 45 20 20 20 00 00 00 00  "ETEMPLATE   ...."
>  fb590  00 00 23 00 00 00 e0 fe 7c 00 db 00 00 00 14 03  "..#.....|......."
>  fb5a0  d8 06 00 00 ff fb e9 af 00 00 00 00 00 00 00 00  "................"
>  fb5b0  01 00 50 43 49 20 20 20 01 01 50 43 49 20 20 20  "..PCI   ..PCI   "
>  fb5c0  01 02 50 43 49 20 20 20 01 03 50 43 49 20 20 20  "..PCI   ..PCI   "
>  fb5d0  01 04 49 53 41 20 20 20 02 01 20 01 00 00 c0 fe  "..ISA   .. ....."
>  fb5e0  03 03 00 00 04 00 01 00 03 00 00 00 04 01 01 01  "................"
>  fb5f0  03 00 00 00 04 00 01 02 03 00 00 00 04 04 01 04  "................"
>  fb600  03 00 00 00 04 06 01 06 03 00 00 00 04 07 01 07  "................"
>  fb610  03 00 05 00 04 08 01 08 03 00 00 00 04 09 01 09  "................"
>  fb620  03 00 00 00 04 0c 01 0c 03 00 00 00 04 0d 01 0d  "................"
>  fb630  03 00 00 00 04 0e 01 0e 03 00 00 00 04 0f 01 0f  "................"
>  fb640  03 00 0f 00 00 7c 01 12 03 00 0f 00 00 7d 01 13  ".....|.......}.."
>  fb650  03 00 0f 00 00 74 01 17 03 00 0f 00 00 75 01 13  ".....t.......u.."
>  fb660  03 00 0f 00 00 76 01 12 03 00 0f 00 00 77 01 10  ".....v.......w.."
>  fb670  03 00 0f 00 00 6c 01 10 03 00 0f 00 00 70 01 10  ".....l.......p.."
>  fb680  03 00 0f 00 01 0c 01 13 03 00 0f 00 01 1c 01 10  "................"
>  fb690  03 00 0f 00 01 14 01 13 03 00 0f 00 01 10 01 12  "................"
>  fb6a0  03 00 0f 00 03 00 01 10 03 00 0f 00 00 04 01 10  "................"
>  fb6b0  04 03 00 00 00 00 ff 00 04 01 00 00 00 00 ff 01  "................"
>  fb6c0  80 14 00 00 00 c0 00 00 00 00 00 00 00 30 00 00  ".............0.."
>  fb6d0  00 00 00 00 80 14 00 00 00 00 00 00 00 00 00 00  "................"
>  fb6e0  00 01 00 00 00 00 00 00 80 14 00 01 00 00 0a 00  "................"
>  fb6f0  00 00 00 00 00 00 02 00 00 00 00 00 80 14 00 01  "................"
>  fb700  00 00 90 fa 00 00 00 00 00 00 30 04 00 00 00 00  "..........0....."
>  fb710  80 14 00 02 00 00 e0 bf 00 00 00 00 00 00 20 20  "..............  "
>  fb720  00 00 00 00 81 08 04 01 00 00 00 00 82 08 00 00  "................"
>  fb730  00 00 00 00 82 08 00 00 01 00 00 00  "............"
>----- MP config table end -----
>>> bios.4: vbe
>/dev/mem[0xc0000, 3]: mmap(, 4096,,,, 0xc0000) ok
>/dev/mem[0xc0000, 60416]: mmap(, 61440,,,, 0xc0000) ok
>vbe: BIOS chksum wrong
>/dev/mem[0x0, 4096]: mmap(, 4096,,,, 0x0) ok
>  vbe: int 10h points to c000:0ece: 52 50 ba ca 03 ec 3c ff
>>> bios.4.1: vbe info
>vm86: using CPU emulation
>>> bios.5: 32
>  bios32: valid SD header at 0xf0000 (size 0x10, rev 0), SD at 0xf0010
>>> sys.1: cpu
>  vmware check: 0
>>> misc.9: kernel log
>----- kernel log -----
>  <5>Linux version 2.6.13.3-2-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Fri Oct 7 08:58:58 UTC 2005
>  <6>BIOS-provided physical RAM map:
>  <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  <4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>  <4> BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
>  <4> BIOS-e820: 000000001ffd0000 - 000000001ffde000 (ACPI data)
>  <4> BIOS-e820: 000000001ffde000 - 0000000020000000 (ACPI NVS)
>  <4> BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved)
>  <4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>  <5>0MB HIGHMEM available.
>  <5>511MB LOWMEM available.
>  <6>found SMP MP-table at 000ff780
>  <7>On node 0 totalpages: 131024
>  <7>  DMA zone: 4096 pages, LIFO batch:1
>  <7>  Normal zone: 126928 pages, LIFO batch:31
>  <7>  HighMem zone: 0 pages, LIFO batch:1
>  <6>DMI 2.3 present.
>  <7>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f80c0
>  <7>ACPI: RSDT (v001 A M I  OEMRSDT  0x04000529 MSFT 0x00000097) @ 0x1ffd0000
>  <7>ACPI: FADT (v002 A M I  OEMFACP  0x04000529 MSFT 0x00000097) @ 0x1ffd0200
>  <7>ACPI: MADT (v001 A M I  OEMAPIC  0x04000529 MSFT 0x00000097) @ 0x1ffd0390
>  <7>ACPI: MCFG (v001 A M I  OEMMCFG  0x04000529 MSFT 0x00000097) @ 0x1ffd03f0
>  <7>ACPI: OEMB (v001 A M I  AMI_OEM  0x04000529 MSFT 0x00000097) @ 0x1ffde040
>  <7>ACPI: MCFG (v001 A M I  OEMMCFG  0x04000529 MSFT 0x00000097) @ 0x1ffd4df0
>  <7>ACPI: SSDT (v001    AMI   CPU1PM 0x00000001 INTL 0x02002026) @ 0x1ffd4e30
>  <7>ACPI: DSDT (v001 UW____ F18_____ 0x00000001 INTL 0x02002026) @ 0x00000000
>  <6>ACPI: PM-Timer IO Port: 0x808
>  <6>ACPI: local apic disabled
>  <6>Intel MultiProcessor Specification v1.4
>  <6>    Virtual Wire compatibility mode.
>  <6>OEM ID: TEMPLATE Product ID: ETEMPLATE    APIC at: 0xFEE00000
>  <4>Processor #0 6:13 APIC version 20
>  <6>I/O APIC #1 Version 32 at 0xFEC00000.
>  <6>Processors: 1
>  <4>Allocating PCI resources starting at 20000000 (gap: 20000000:ded13000)
>  <4>Built 1 zonelists
>  <5>Kernel command line: root=/dev/sda3 vga=0x317 selinux=0    resume=/dev/sda2  splash=silent
>  <6>bootsplash: silent mode.
>  <6>Initializing CPU#0
>  <4>PID hash table entries: 2048 (order: 11, 32768 bytes)
>  <4>Detected 1867.066 MHz processor.
>  <6>Using pmtmr for high-res timesource
>  <4>Console: colour dummy device 80x25
>  <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>  <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>  <6>Memory: 513488k/524096k available (2035k kernel code, 9972k reserved, 697k data, 204k init, 0k highmem)
>  <4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>  <4>Calibrating delay using timer specific routine.. 3737.40 BogoMIPS (lpj=7474804)
>  <6>Security Framework v1.0.0 initialized
>  <6>SELinux:  Disabled at boot.
>  <4>Mount-cache hash table entries: 512
>  <7>CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
>  <7>CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
>  <6>CPU: L1 I cache: 32K, L1 D cache: 32K
>  <6>CPU: L2 cache: 2048K
>  <7>CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
>  <6>Intel machine check architecture supported.
>  <6>Intel machine check reporting enabled on CPU#0.
>  <6>mtrr: v2.0 (20020519)
>  <4>CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
>  <6>Enabling fast FPU save and restore... done.
>  <6>Enabling unmasked SIMD FPU exception support... done.
>  <6>Checking 'hlt' instruction... OK.
>  <6>checking if image is initramfs... it is
>  <6>Freeing initrd memory: 1709k freed
>  <6>ACPI: Looking for DSDT in initrd... not found!
>  <4> not found!
>  <4>ACPI: setting ELCR to 0200 (from 0c28)
>  <6>NET: Registered protocol family 16
>  <6>ACPI: bus type pci registered
>  <6>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
>  <4>ACPI: 2 duplicate MCFG table ignored.
>  <6>PCI: Using MMCONFIG
>  <6>ACPI: Subsystem revision 20050408
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: Using PIC for interrupt routing
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <4>PCI: Probing PCI hardware (bus 00)
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>  <6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>  <7>Boot video device is 0000:03:00.0
>  <6>PCI: Transparent bridge - 0000:00:1e.0
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>  <6>ACPI: Embedded Controller [EC0] (gpe 24)
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>  <4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>  <6>Linux Plug and Play Support v0.97 (c) Adam Belay
>  <6>pnp: PnP ACPI init
>  <6>pnp: PnP ACPI: found 12 devices
>  <6>PCI: Using ACPI for IRQ routing
>  <6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>  <3>PCI: Cannot allocate resource region 7 of bridge 0000:00:1e.0
>  <3>PCI: Cannot allocate resource region 0 of device 0000:01:07.0
>  <3>PCI: Cannot allocate resource region 1 of device 0000:01:07.0
>  <3>PCI: Cannot allocate resource region 2 of device 0000:01:07.0
>  <3>PCI: Cannot allocate resource region 3 of device 0000:01:07.0
>  <3>PCI: Cannot allocate resource region 4 of device 0000:01:07.0
>  <3>PCI: Cannot allocate resource region 5 of device 0000:01:07.0
>  <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>  <6>PCI: Bridge: 0000:00:01.0
>  <6>  IO window: disabled.
>  <6>  MEM window: faa00000-feafffff
>  <6>  PREFETCH window: bfe00000-dfefffff
>  <6>PCI: Bridge: 0000:00:1c.0
>  <6>  IO window: d000-dfff
>  <6>  MEM window: bfc00000-bfcfffff
>  <6>  PREFETCH window: bfd00000-bfdfffff
>  <6>PCI: Bridge: 0000:00:1e.0
>  <6>  IO window: 1000-1fff
>  <6>  MEM window: fa900000-fa9fffff
>  <6>  PREFETCH window: 20000000-200fffff
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>  <4>PCI: setting IRQ 10 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:01.0 to 64
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <4>PCI: Enabling device 0000:00:1c.0 (0106 -> 0107)
>  <6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>  <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>  <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>  <5>apm: overridden by ACPI.
>  <6>audit: initializing netlink socket (disabled)
>  <4>audit(1130280908.388:1): initialized
>  <4>Total HugeTLB memory allocated, 0
>  <5>VFS: Disk quotas dquot_6.5.1
>  <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>  <6>Initializing Cryptographic API
>  <6>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:01.0 to 64
>  <4>assign_interrupt_mode Found MSI capability
>  <7>Allocate Port Service[pcie00]
>  <7>Allocate Port Service[pcie03]
>  <6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>  <4>assign_interrupt_mode Found MSI capability
>  <7>Allocate Port Service[pcie00]
>  <7>Allocate Port Service[pcie02]
>  <7>Allocate Port Service[pcie03]
>  <6>vesafb: framebuffer at 0xc0000000, mapped to 0xe0880000, using 6144k, total 262144k
>  <6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>  <6>vesafb: protected mode interface info at c000:d190
>  <6>vesafb: scrolling: redraw
>  <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>  <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>  <4>Console: switching to colour frame buffer device 127x44
>  <6>fb0: VESA VGA frame buffer device
>  <6>isapnp: Scanning for PnP cards...
>  <6>isapnp: No Plug & Play device found
>  <6>Real Time Clock Driver v1.12
>  <6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>  <6>i8042.c: Detected active multiplexing controller, rev 1.0.
>  <6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>  <6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>  <6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>  <6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered
>  <4>floppy0: no floppy controllers found
>  <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>  <6>loop: loaded (max 8 devices)
>  <6>mice: PS/2 mouse device common for all mice
>  <6>input: PC Speaker
>  <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>  <6>md: bitmap version 3.38
>  <6>NET: Registered protocol family 2
>  <6>input: AT Translated Set 2 keyboard on isa0060/serio0
>  <4>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
>  <4>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>  <4>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
>  <6>TCP: Hash tables configured (established 32768 bind 32768)
>  <6>TCP reno registered
>  <6>NET: Registered protocol family 1
>  <4>Using IPI Shortcut mode
>  <4>ACPI wakeup devices: 
>  <4>P0P1  LAN  AZC P0P5 P0P6 P0P7 P0P3 P0P2 
>  <6>ACPI: (supports S0 S3 S4 S5)
>  <6>Freeing unused kernel memory: 204k freed
>  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  <5>SCSI subsystem initialized
>  <6>ICH6: IDE controller at PCI slot 0000:00:1f.1
>  <4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>  <4>PCI: setting IRQ 5 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>  <6>ICH6: chipset revision 4
>  <6>ICH6: not 100% native mode: will probe irqs later
>  <6>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>  <6>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
>  <7>Probing IDE interface ide0...
>  <4>hda: HL-DT-ST DVD-RW GCA-4080N, ATAPI CD/DVD-ROM drive
>  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  <7>Probing IDE interface ide1...
>  <7>libata version 1.12 loaded.
>  <7>sata_via version 1.1
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <6>ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <6>sata_via(0000:01:07.0): routed to hard irq line 10
>  <6>ata1: SATA max UDMA/133 cmd 0x1420 ctl 0x142A bmdma 0x1400 irq 10
>  <6>ata2: SATA max UDMA/133 cmd 0x1430 ctl 0x143A bmdma 0x1408 irq 10
>  <6>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
>  <6>input: SynPS/2 Synaptics TouchPad on isa0060/serio2
>  <7>ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:6003 85:3c69 86:3e01 87:6003 88:80ff
>  <6>ata1: dev 0 ATA, max UDMA7, 156301488 sectors: lba48
>  <6>ata1: dev 0 configured for UDMA/133
>  <6>scsi0 : sata_via
>  <6>ata2: no device found (phy stat 00000000)
>  <6>scsi1 : sata_via
>  <5>  Vendor: ATA       Model: SAMSUNG HM080JI   Rev: YC10
>  <5>  Type:   Direct-Access                      ANSI SCSI revision: 05
>  <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>  <5>SCSI device sda: drive cache: write back
>  <5>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>  <5>SCSI device sda: drive cache: write back
>  <6> sda: sda1 sda2 sda3 sda4
>  <5>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  <6>ACPI: CPU0 (power states: C1[C1] C2[C2])
>  <6>ACPI: Processor [CPU1] (supports 8 throttling states)
>  <6>ACPI: Thermal Zone [THRM] (42 C)
>  <5>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>  <4>Attempting manual resume
>  <3>swsusp: Suspend partition has wrong signature?
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on sda3, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <3>udev[1420]: run_program: open /dev/null failed
>  <3>udev[1420]: run_program: exec of program '/sbin/modprobe' failed
>  <6>bootsplash: status on console 0 changed to on
>  <6>Adding 2626616k swap on /dev/sda2.  Priority:-1 extents:1
>  <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>  <6>kjournald starting.  Commit interval 5 seconds
>  <6>EXT3 FS on sda4, internal journal
>  <6>EXT3-fs: mounted filesystem with ordered data mode.
>  <6>IPv6 over IPv4 tunneling driver
>  <4>ip6_tables: (C) 2000-2002 Netfilter core team
>  <4>ip_tables: (C) 2000-2002 Netfilter core team
>  <4>ip_conntrack version 2.1 (4094 buckets, 32752 max) - 248 bytes per conntrack
>  <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>  <6>Linux agpgart interface v0.101 (c) Dave Jones
>  <6>agpgart: Detected an Intel 915GM Chipset.
>  <6>agpgart: AGP aperture is 256M @ 0x0
>  <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>  <6>usbcore: registered new driver usbfs
>  <6>usbcore: registered new driver hub
>  <6>USB Universal Host Controller Interface driver v2.3
>  <4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>  <4>PCI: setting IRQ 11 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>  <7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>  <6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>  <6>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e480
>  <6>hub 1-0:1.0: USB hub found
>  <6>hub 1-0:1.0: 2 ports detected
>  <4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
>  <4>PCI: setting IRQ 3 as level-triggered
>  <6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>  <7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>  <6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>  <6>uhci_hcd 0000:00:1d.1: irq 3, io base 0x0000e800
>  <6>hub 2-0:1.0: USB hub found
>  <6>hub 2-0:1.0: 2 ports detected
>  <6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>  <7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>  <6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>  <6>uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000e880
>  <6>hub 3-0:1.0: USB hub found
>  <6>hub 3-0:1.0: 2 ports detected
>  <6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>  <7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>  <6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>  <6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>  <6>uhci_hcd 0000:00:1d.3: irq 10, io base 0x0000ec00
>  <6>hub 4-0:1.0: USB hub found
>  <6>hub 4-0:1.0: 2 ports detected
>  <3>hw_random: RNG not detected
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>  <7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>  <6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>  <6>ehci_hcd 0000:00:1d.7: debug port 1
>  <6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>  <6>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfebffc00
>  <7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>  <6>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>  <6>hub 5-0:1.0: USB hub found
>  <6>hub 5-0:1.0: 8 ports detected
>  <6>r8169 Gigabit Ethernet driver 2.2LK loaded
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <6>ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>  <7>eth0: Identified chip type is 'RTL8169s/8110s'.
>  <6>eth0: RTL8169 at 0xe11f8c00, 00:03:0d:30:a6:fd, IRQ 3
>  <7>ieee1394: Initialized config rom entry `ip1394'
>  <6>ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <6>ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>  <6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[fa9ff000-fa9ff7ff]  Max Packet=[2048]
>  <4>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>  <7>ieee80211_crypt: registered algorithm 'NULL'
>  <4>ieee80211: module not supported by Novell, setting U taint flag.
>  <6>ieee80211: 802.11 data/management/control stack, 1.0.3
>  <6>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>  <4>ipw2200: module not supported by Novell, setting U taint flag.
>  <6>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
>  <6>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <6>ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>  <6>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>  <6>hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>  <6>Uniform CD-ROM driver Revision: 3.20
>  <3>ipw2200: ipw-2.3-boot.fw load failed: Reason -2
>  <3>ipw2200: Unable to load firmware: 0xFFFFFFFE
>  <3>ipw2200: failed to register network device
>  <6>ACPI: PCI interrupt for device 0000:01:03.0 disabled
>  <4>ipw2200: probe of 0000:01:03.0 failed with error -5
>  <7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d4971e177bd]
>  <6>bootsplash: status on console 0 changed to on
>  <6>r8169: eth0: link down
>  <6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>  <6>ACPI: AC Adapter [AC0] (on-line)
>  <6>ACPI: Battery Slot [BAT0] (battery present)
>  <6>ACPI: Power Button (FF) [PWRF]
>  <6>ACPI: Lid Switch [LID]
>  <6>ACPI: Sleep Button (CM) [SLPB]
>  <6>ACPI: Power Button (CM) [PWRB]
>  <6>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>  <3>microcode: CPU0 already at revision 0x20 (current=0x20)
>  <6>microcode: No new microcode data for CPU0
>  <6>IA-32 Microcode Update Driver v1.14 unregistered
>  <6>bootsplash: status on console 0 changed to on
>  <4>    ACPI-0141: *** Warning: Table CPU1PM has already been loaded (not bad)
>  <6>bootsplash: status on console 0 changed to on
>  <4>eth0: PHY reset until link up
>  <7>eth0: no IPv6 routers present
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <6>lp: driver loaded but no devices found
>  <6>lp: driver loaded but no devices found
>  <6>st: Version 20050501, fixed bufsize 32768, s/g segs 256
>  <6>NET: Registered protocol family 17
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>  <4>eth0: PHY reset until link up
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/rmmod lp" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport " -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc " -----
>----- return code: ? -----
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>  0000-001f : dma1
>  0020-0021 : pic1
>  0040-0043 : timer0
>  0050-0053 : timer1
>  0060-006f : keyboard
>  0070-0077 : rtc
>  0080-008f : dma page reg
>  00a0-00a1 : pic2
>  00c0-00df : dma2
>  00f0-00ff : fpu
>  01f0-01f7 : ide0
>  03c0-03df : vesafb
>  03f6-03f6 : ide0
>  0400-041f : 0000:00:1f.3
>    0400-0407 : i801-smbus
>  0800-0803 : PM1a_EVT_BLK
>  0804-0805 : PM1a_CNT_BLK
>  0808-080b : PM_TMR
>  0810-0815 : ACPI CPU throttle
>  0828-082f : GPE0_BLK
>  1000-1fff : PCI Bus #01
>    1000-10ff : 0000:01:07.0
>      1000-10ff : sata_via
>    1400-141f : 0000:01:07.0
>      1400-141f : sata_via
>    1420-142f : 0000:01:07.0
>      1420-142f : sata_via
>    1430-143f : 0000:01:07.0
>      1430-143f : sata_via
>    1440-144f : 0000:01:07.0
>      1440-144f : sata_via
>    1450-145f : 0000:01:07.0
>      1450-145f : sata_via
>  c800-c8ff : 0000:01:05.0
>    c800-c8ff : r8169
>  d000-dfff : PCI Bus #02
>  e480-e49f : 0000:00:1d.0
>    e480-e49f : uhci_hcd
>  e800-e81f : 0000:00:1d.1
>    e800-e81f : uhci_hcd
>  e880-e89f : 0000:00:1d.2
>    e880-e89f : uhci_hcd
>  ec00-ec1f : 0000:00:1d.3
>    ec00-ec1f : uhci_hcd
>  ffa0-ffaf : 0000:00:1f.1
>    ffa0-ffa7 : ide0
>    ffa8-ffaf : ide1
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>    0:     192272          XT-PIC  timer
>    1:        458          XT-PIC  i8042
>    2:          0          XT-PIC  cascade
>    3:          1          XT-PIC  uhci_hcd:usb2, eth0
>    5:          3          XT-PIC  uhci_hcd:usb3, ohci1394
>    8:          2          XT-PIC  rtc
>    9:       2425          XT-PIC  acpi
>   10:       4637          XT-PIC  libata, uhci_hcd:usb4
>   11:          0          XT-PIC  uhci_hcd:usb1, ehci_hcd:usb5
>   12:      15024          XT-PIC  i8042
>   14:       6744          XT-PIC  ide0
>  NMI:          0 
>  LOC:          0 
>  ERR:          0
>  MIS:          0
>----- /proc/interrupts end -----
>----- /proc/dma -----
>   4: cascade
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 6
>  model		: 13
>  model name	: Intel(R) Pentium(R) M processor 1.86GHz
>  stepping	: 8
>  cpu MHz		: 800.171
>  cache size	: 2048 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 2
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe est tm2
>  bogomips	: 1601.74
>  
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0x1ffd0000
>  klog mem 0: 0x1f574000
>  klog mem 1: 0x0
>  klog mem:   0x1f574000
> -- <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> -- <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> -- <4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> -- <4> BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
> -- <4> BIOS-e820: 000000001ffd0000 - 000000001ffde000 (ACPI data)
> -- <4> BIOS-e820: 000000001ffde000 - 0000000020000000 (ACPI NVS)
> -- <4> BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved)
> -- <4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> -- <5>0MB HIGHMEM available.
>  bios mem:   0x1ff6fc00
>  meminfo:    0x1f791000
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0xcc93095ccc4e4a31) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>        PIIX_IDE: /devices/pci0000:00/0000:00:1f.1
>   agpgart-intel: /devices/pci0000:00/0000:00:00.0
>        ehci_hcd: /devices/pci0000:00/0000:00:1d.7
>      i801_smbus: /devices/pci0000:00/0000:00:1f.3
>        ohci1394: /devices/pci0000:00/0000:00:1e.0/0000:01:04.0
> pcieport-driver: /devices/pci0000:00/0000:00:01.0
> pcieport-driver: /devices/pci0000:00/0000:00:1c.0
>           r8169: /devices/pci0000:00/0000:00:1e.0/0000:01:05.0
>        sata_via: /devices/pci0000:00/0000:00:1e.0/0000:01:07.0
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.0
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.1
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.2
>        uhci_hcd: /devices/pci0000:00/0000:00:1d.3
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>       i8042 aux: /devices/pnp0/00:04
>       i8042 kbd: /devices/pnp0/00:03
>          system: /devices/pnp0/00:00
>          system: /devices/pnp0/00:07
>          system: /devices/pnp0/00:08
>          system: /devices/pnp0/00:09
>          system: /devices/pnp0/00:0b
>              sd: /devices/pci0000:00/0000:00:1e.0/0000:01:07.0/host0/target0:0:0/0:0:0:0
>           atkbd: /devices/platform/i8042/serio4
>         psmouse: /devices/platform/i8042/serio1
>             hub: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0
>             hub: /devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0
>             hub: /module/usbcore
>             usb: /devices/pci0000:00/0000:00:1d.0/usb1
>             usb: /devices/pci0000:00/0000:00:1d.1/usb2
>             usb: /devices/pci0000:00/0000:00:1d.2/usb3
>             usb: /devices/pci0000:00/0000:00:1d.3/usb4
>             usb: /devices/pci0000:00/0000:00:1d.7/usb5
>             usb: /module/usbcore
>           usbfs: /module/usbcore
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:00.0
>    modalias = "pci:v00008086d00002590sv00001734sd0000107Cbc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x8086
>    device = 0x2590
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0
>    modalias = "pci:v00008086d00002591sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x2591
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 65
>    config[64]
>  pci device: name = 0000:00:1b.0, bus_id = 0000:00:1b.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1b.0
>    modalias = "pci:v00008086d00002668sv00001734sd0000107Cbc04sc03i00
>"
>    class = 0x40300
>    vendor = 0x8086
>    device = 0x2668
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 10
>    res[0] = 0xfebf8000 0xfebfbfff 0x204
>    config[64]
>  pci device: name = 0000:00:1c.0, bus_id = 0000:00:1c.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1c.0
>    modalias = "pci:v00008086d00002660sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x8086
>    device = 0x2660
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 73
>    config[64]
>  pci device: name = 0000:00:1d.0, bus_id = 0000:00:1d.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.0
>    modalias = "pci:v00008086d00002658sv00001734sd0000107Cbc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x2658
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 11
>    res[4] = 0xe480 0xe49f 0x101
>    config[64]
>  pci device: name = 0000:00:1d.1, bus_id = 0000:00:1d.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.1
>    modalias = "pci:v00008086d00002659sv00001734sd0000107Cbc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x2659
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 3
>    res[4] = 0xe800 0xe81f 0x101
>    config[64]
>  pci device: name = 0000:00:1d.2, bus_id = 0000:00:1d.2, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.2
>    modalias = "pci:v00008086d0000265Asv00001734sd0000107Cbc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x265a
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 5
>    res[4] = 0xe880 0xe89f 0x101
>    config[64]
>  pci device: name = 0000:00:1d.3, bus_id = 0000:00:1d.3, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.3
>    modalias = "pci:v00008086d0000265Bsv00001734sd0000107Cbc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x8086
>    device = 0x265b
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 10
>    res[4] = 0xec00 0xec1f 0x101
>    config[64]
>  pci device: name = 0000:00:1d.7, bus_id = 0000:00:1d.7, bus = pci
>    path = /devices/pci0000:00/0000:00:1d.7
>    modalias = "pci:v00008086d0000265Csv00001734sd0000107Cbc0Csc03i20
>"
>    class = 0xc0320
>    vendor = 0x8086
>    device = 0x265c
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 11
>    res[0] = 0xfebffc00 0xfebfffff 0x200
>    config[64]
>  pci device: name = 0000:00:1e.0, bus_id = 0000:00:1e.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0
>    modalias = "pci:v00008086d00002448sv00000000sd00000000bc06sc04i01
>"
>    class = 0x60401
>    vendor = 0x8086
>    device = 0x2448
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.0, bus_id = 0000:00:1f.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.0
>    modalias = "pci:v00008086d00002641sv00001734sd0000107Cbc06sc01i00
>"
>    class = 0x60100
>    vendor = 0x8086
>    device = 0x2641
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:1f.1, bus_id = 0000:00:1f.1, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.1
>    modalias = "pci:v00008086d0000266Fsv00001734sd0000107Cbc01sc01i8a
>"
>    class = 0x1018a
>    vendor = 0x8086
>    device = 0x266f
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 5
>    res[4] = 0xffa0 0xffaf 0x101
>    config[64]
>  pci device: name = 0000:00:1f.3, bus_id = 0000:00:1f.3, bus = pci
>    path = /devices/pci0000:00/0000:00:1f.3
>    modalias = "pci:v00008086d0000266Asv00001734sd0000107Cbc0Csc05i00
>"
>    class = 0xc0500
>    vendor = 0x8086
>    device = 0x266a
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 10
>    res[4] = 0x400 0x41f 0x101
>    config[64]
>  pci device: name = 0000:01:03.0, bus_id = 0000:01:03.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:01:03.0
>    modalias = "pci:v00008086d00004220sv00008086sd00002702bc02sc80i00
>"
>    class = 0x28000
>    vendor = 0x8086
>    device = 0x4220
>    subvendor = 0x8086
>    subdevice = 0x2702
>    irq = 3
>    res[0] = 0xfa9fe000 0xfa9fefff 0x200
>    config[64]
>  pci device: name = 0000:01:04.0, bus_id = 0000:01:04.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:01:04.0
>    modalias = "pci:v0000104Cd00008023sv00001734sd0000107Cbc0Csc00i10
>"
>    class = 0xc0010
>    vendor = 0x104c
>    device = 0x8023
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 5
>    res[0] = 0xfa9ff000 0xfa9ff7ff 0x200
>    res[1] = 0xfa9f8000 0xfa9fbfff 0x200
>    config[64]
>  pci device: name = 0000:01:05.0, bus_id = 0000:01:05.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:01:05.0
>    modalias = "pci:v000010ECd00008169sv00001734sd0000107Cbc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x10ec
>    device = 0x8169
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 3
>    res[0] = 0xc800 0xc8ff 0x101
>    res[1] = 0xfa9ffc00 0xfa9ffcff 0x200
>    res[6] = 0x20000000 0x2001ffff 0x7200
>    config[64]
>  pci device: name = 0000:01:07.0, bus_id = 0000:01:07.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:01:07.0
>    modalias = "pci:v00001106d00003249sv00001734sd0000107Cbc01sc04i00
>"
>    class = 0x10400
>    vendor = 0x1106
>    device = 0x3249
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 10
>    res[0] = 0x1420 0x142f 0x101
>    res[1] = 0x1430 0x143f 0x101
>    res[2] = 0x1440 0x144f 0x101
>    res[3] = 0x1450 0x145f 0x101
>    res[4] = 0x1400 0x141f 0x101
>    res[5] = 0x1000 0x10ff 0x101
>    config[64]
>  pci device: name = 0000:03:00.0, bus_id = 0000:03:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0/0000:03:00.0
>    modalias = "pci:v000010DEd000000C8sv00001734sd0000107Cbc03sc00i00
>"
>    class = 0x30000
>    vendor = 0x10de
>    device = 0xc8
>    subvendor = 0x1734
>    subdevice = 0x107c
>    irq = 10
>    res[0] = 0xfd000000 0xfdffffff 0x200
>    res[1] = 0xc0000000 0xcfffffff 0x120c
>    res[3] = 0xfc000000 0xfcffffff 0x204
>    res[6] = 0xfeae0000 0xfeafffff 0x7202
>    config[64]
>---------- PCI raw data ----------
>bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:2590:1734:107c:04
>class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: 86 80 90 25 06 00 90 20 04 00 00 06 00 00 00 00  "...%... ........"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  e0: 09 00  ".."
>
>bus 00->03, slot 01, func 0, vend:dev:s_vend:s_dev:rev 8086:2591:0000:0000:04
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 65
>  00: 86 80 91 25 07 04 10 00 04 00 04 06 08 00 01 00  "...%............"
>  10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20  "............... "
>  20: a0 fa a0 fe e0 bf e0 df 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 88 00 00 00 00 00 00 00 0a 01 0a 00  "................"
>
>bus 00, slot 1b, func 0, vend:dev:s_vend:s_dev:rev 8086:2668:1734:107c:04
>class 04, sub_class 03 prog_if 00, hdr 0, flags <pm>, irq 10
>  addr0 febf8000, size 00004000
>  00: 86 80 68 26 06 00 10 00 04 00 03 04 08 00 00 00  "..h&............"
>  10: 04 80 bf fe 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00  "....P..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 01 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ".`.............."
>  60: 05 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ".p.............."
>  70: 10 00  ".."
>
>bus 00->02, slot 1c, func 0, vend:dev:s_vend:s_dev:rev 8086:2660:0000:0000:04
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 73
>  00: 86 80 60 26 07 05 10 00 04 00 04 06 08 00 81 00  "..`&............"
>  10: 00 00 00 00 00 00 00 00 00 02 02 00 d0 d0 00 00  "................"
>  20: c0 bf c0 bf d1 bf d1 bf 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 06 00  "....@..........."
>
>bus 00, slot 1d, func 0, vend:dev:s_vend:s_dev:rev 8086:2658:1734:107c:04
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 11
>  addr4 0000e480, size 00000020
>  00: 86 80 58 26 05 00 80 02 04 00 03 0c 00 00 80 00  "..X&............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 81 e4 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00  "................"
>
>bus 00, slot 1d, func 1, vend:dev:s_vend:s_dev:rev 8086:2659:1734:107c:04
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 3
>  addr4 0000e800, size 00000020
>  00: 86 80 59 26 05 00 80 02 04 00 03 0c 00 00 00 00  "..Y&............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 e8 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 03 02 00 00  "................"
>
>bus 00, slot 1d, func 2, vend:dev:s_vend:s_dev:rev 8086:265a:1734:107c:04
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 5
>  addr4 0000e880, size 00000020
>  00: 86 80 5a 26 05 00 80 02 04 00 03 0c 00 00 00 00  "..Z&............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 81 e8 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 05 03 00 00  "................"
>
>bus 00, slot 1d, func 3, vend:dev:s_vend:s_dev:rev 8086:265b:1734:107c:04
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 10
>  addr4 0000ec00, size 00000020
>  00: 86 80 5b 26 05 00 80 02 04 00 03 0c 00 00 00 00  "..[&............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 ec 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 04 00 00  "................"
>
>bus 00, slot 1d, func 7, vend:dev:s_vend:s_dev:rev 8086:265c:1734:107c:04
>class 0c, sub_class 03 prog_if 20, hdr 0, flags <pm>, irq 11
>  addr0 febffc00, size 00000400
>  00: 86 80 5c 26 06 00 90 02 04 20 03 0c 00 00 00 00  "..\&..... ......"
>  10: 00 fc bf fe 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00  "....P..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 01 58 00 00 00 00 00 00 0a 00  ".X........"
>
>bus 00->01, slot 1e, func 0, vend:dev:s_vend:s_dev:rev 8086:2448:0000:0000:d4
>class 06, sub_class 04 prog_if 01, hdr 1, flags <>, irq 0
>  00: 86 80 48 24 07 01 10 00 d4 01 04 06 00 00 01 00  "..H$............"
>  10: 00 00 00 00 00 00 00 00 00 01 01 20 10 10 80 22  "........... ...""
>  20: 90 fa 90 fa 01 20 01 20 00 00 00 00 00 00 00 00  "..... . ........"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 06 00  "....P..........."
>
>bus 00, slot 1f, func 0, vend:dev:s_vend:s_dev:rev 8086:2641:1734:107c:04
>class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0
>  00: 86 80 41 26 07 00 00 02 04 00 01 06 00 00 80 00  "..A&............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 1f, func 1, vend:dev:s_vend:s_dev:rev 8086:266f:1734:107c:04
>class 01, sub_class 01 prog_if 8a, hdr 0, flags <>, irq 5
>  addr4 0000ffa0, size 00000010
>  00: 86 80 6f 26 05 00 88 02 04 8a 01 01 00 00 00 00  "..o&............"
>  10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00  "................"
>  20: a1 ff 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00  "................"
>
>bus 00, slot 1f, func 3, vend:dev:s_vend:s_dev:rev 8086:266a:1734:107c:04
>class 0c, sub_class 05 prog_if 00, hdr 0, flags <>, irq 10
>  addr4 00000400, size 00000020
>  00: 86 80 6a 26 01 00 80 02 04 00 05 0c 00 00 00 00  "..j&............"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 04 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00  "................"
>
>bus 01, slot 03, func 0, vend:dev:s_vend:s_dev:rev 8086:4220:8086:2702:05
>class 02, sub_class 80 prog_if 00, hdr 0, flags <pm>, irq 3
>  addr0 fa9fe000, size 00001000
>  00: 86 80 20 42 12 00 90 02 05 00 80 02 08 40 00 00  ".. B.........@.."
>  10: 00 e0 9f fa 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 02 27  "...............'"
>  30: 00 00 00 00 dc 00 00 00 00 00 00 00 03 01 03 18  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00  ".............."
>
>bus 01, slot 04, func 0, vend:dev:s_vend:s_dev:rev 104c:8023:1734:107c:00
>class 0c, sub_class 00 prog_if 10, hdr 0, flags <pm>, irq 5
>  addr0 fa9ff000, size 00000800
>  addr1 fa9f8000, size 00004000
>  00: 4c 10 23 80 16 00 10 02 00 10 00 0c 08 40 00 00  "L.#..........@.."
>  10: 00 f0 9f fa 00 80 9f fa 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 04  "....D..........."
>  40: 00 00 00 00 01 00  "......"
>
>bus 01, slot 05, func 0, vend:dev:s_vend:s_dev:rev 10ec:8169:1734:107c:10
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 3
>  addr0 0000c800, size 00000100
>  addr1 fa9ffc00, size 00000100
>  00: ec 10 69 81 17 00 b8 02 10 00 00 02 08 40 00 00  "..i..........@.."
>  10: 01 c8 00 00 00 fc 9f fa 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 9c fa dc 00 00 00 00 00 00 00 03 01 20 40  ".............. @"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00  ".............."
>
>bus 01, slot 07, func 0, vend:dev:s_vend:s_dev:rev 1106:3249:1734:107c:50
>class 01, sub_class 04 prog_if 00, hdr 0, flags <pm>, irq 10
>  addr0 00001420, size 00000010
>  addr1 00001430, size 00000010
>  addr2 00001440, size 00000010
>  addr3 00001450, size 00000010
>  addr4 00001400, size 00000020
>  addr5 00001000, size 00000100
>  00: 06 11 49 32 07 00 90 02 50 00 04 01 00 40 00 00  "..I2....P....@.."
>  10: 21 14 00 00 31 14 00 00 41 14 00 00 51 14 00 00  "!...1...A...Q..."
>  20: 01 14 00 00 01 10 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 00 00 e0 00 00 00 00 00 00 00 0a 01 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  e0: 01 00  ".."
>
>bus 03, slot 00, func 0, vend:dev:s_vend:s_dev:rev 10de:00c8:1734:107c:a2
>class 03, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 10
>  addr0 fd000000, size 01000000
>  addr1 c0000000, size 10000000
>  addr3 fc000000, size 01000000
>  00: de 10 c8 00 07 00 10 00 a2 00 00 03 08 00 00 00  "................"
>  10: 00 00 00 fd 0c 00 00 c0 00 00 00 00 04 00 00 fc  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 34 17 7c 10  "............4.|."
>  30: 00 00 ae fe 60 00 00 00 00 00 00 00 0a 01 00 00  "....`..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 01 68 00 00 00 00 00 00 05 78 00 00 00 00 00 00  ".h.......x......"
>  70: 00 00 00 00 00 00 00 00 10 00  ".........."
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> monitor.1: ddc
>>> isapnp.1: pnp devices
>  pnp device: name = 00:00, bus_id = 00:00, bus = pnp
>    path = /devices/pnp0/00:00
>    id = PNP 0c01
>  pnp device: name = 00:01, bus_id = 00:01, bus = pnp
>    path = /devices/pnp0/00:01
>    id = PNP 0200
>  pnp device: name = 00:02, bus_id = 00:02, bus = pnp
>    path = /devices/pnp0/00:02
>    id = PNP 0b00
>  pnp device: name = 00:03, bus_id = 00:03, bus = pnp
>    path = /devices/pnp0/00:03
>    id = PNP 0303
>  pnp device: name = 00:04, bus_id = 00:04, bus = pnp
>    path = /devices/pnp0/00:04
>    id = SYN 0802
>  pnp device: name = 00:05, bus_id = 00:05, bus = pnp
>    path = /devices/pnp0/00:05
>    id = PNP 0800
>  pnp device: name = 00:06, bus_id = 00:06, bus = pnp
>    path = /devices/pnp0/00:06
>    id = PNP 0c04
>  pnp device: name = 00:07, bus_id = 00:07, bus = pnp
>    path = /devices/pnp0/00:07
>    id = PNP 0c02
>  pnp device: name = 00:08, bus_id = 00:08, bus = pnp
>    path = /devices/pnp0/00:08
>    id = PNP 0c02
>  pnp device: name = 00:09, bus_id = 00:09, bus = pnp
>    path = /devices/pnp0/00:09
>    id = PNP 0c02
>  pnp device: name = 00:0a, bus_id = 00:0a, bus = pnp
>    path = /devices/pnp0/00:0a
>    id = PNP 0c14
>  pnp device: name = 00:0b, bus_id = 00:0b, bus = pnp
>    path = /devices/pnp0/00:0b
>    id = PNP 0c01
>>> isa.1: isdn
>---------- ISA ISDN raw data ----------
>---------- ISA ISDN raw data end ----------
>>> isa.1.1: isdn
>>> pcmcia.1: sysfs drivers
>>> pcmcia.2: pcmcia
>sysfs: no such bus: pcmcia
>>> pcmcia.3: pcmcia ctrl
>sysfs: no such class: pcmcia_socket
>>> serial.1: read info
>----- /proc/tty/driver/serial -----
>  0: uart:unknown port:000003F8 irq:4
>  1: uart:unknown port:000002F8 irq:3
>  2: uart:unknown port:000003E8 irq:4
>  3: uart:unknown port:000002E8 irq:3
>----- /proc/tty/driver/serial end -----
>----- serial info -----
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>i/o:1 0x0000 - 0x001f (0x20) "dma1"
>i/o:1 0x0020 - 0x0021 (0x02) "pic1"
>i/o:0 0x0040 - 0x0043 (0x04) "timer0"
>i/o:0 0x0050 - 0x0053 (0x04) "timer1"
>i/o:1 0x0060 - 0x006f (0x10) "keyboard"
>i/o:1 0x0070 - 0x0077 (0x08) "rtc"
>i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
>i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
>i/o:1 0x00c0 - 0x00df (0x20) "dma2"
>i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
>i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
>i/o:1 0x03c0 - 0x03df (0x20) "vesafb"
>i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
>i/o:0 0x0400 - 0x041f (0x20) "0000:00:1f.3"
>i/o:0 0x0400 - 0x0407 (0x08) "i801-smbus"
>i/o:0 0x0800 - 0x0803 (0x04) "PM1a_EVT_BLK"
>i/o:0 0x0804 - 0x0805 (0x02) "PM1a_CNT_BLK"
>i/o:0 0x0808 - 0x080b (0x04) "PM_TMR"
>i/o:0 0x0810 - 0x0815 (0x06) "ACPI CPU throttle"
>i/o:0 0x0828 - 0x082f (0x08) "GPE0_BLK"
>i/o:0 0x1000 - 0x1fff (0x1000) "PCI Bus #01"
>i/o:0 0x1000 - 0x10ff (0x100) "0000:01:07.0"
>i/o:0 0x1000 - 0x10ff (0x100) "sata_via"
>i/o:0 0x1400 - 0x141f (0x20) "0000:01:07.0"
>i/o:0 0x1400 - 0x141f (0x20) "sata_via"
>i/o:0 0x1420 - 0x142f (0x10) "0000:01:07.0"
>i/o:0 0x1420 - 0x142f (0x10) "sata_via"
>i/o:0 0x1430 - 0x143f (0x10) "0000:01:07.0"
>i/o:0 0x1430 - 0x143f (0x10) "sata_via"
>i/o:0 0x1440 - 0x144f (0x10) "0000:01:07.0"
>i/o:0 0x1440 - 0x144f (0x10) "sata_via"
>i/o:0 0x1450 - 0x145f (0x10) "0000:01:07.0"
>i/o:0 0x1450 - 0x145f (0x10) "sata_via"
>i/o:0 0xc800 - 0xc8ff (0x100) "0000:01:05.0"
>i/o:0 0xc800 - 0xc8ff (0x100) "r8169"
>i/o:0 0xd000 - 0xdfff (0x1000) "PCI Bus #02"
>i/o:0 0xe480 - 0xe49f (0x20) "0000:00:1d.0"
>i/o:0 0xe480 - 0xe49f (0x20) "uhci_hcd"
>i/o:0 0xe800 - 0xe81f (0x20) "0000:00:1d.1"
>i/o:0 0xe800 - 0xe81f (0x20) "uhci_hcd"
>i/o:0 0xe880 - 0xe89f (0x20) "0000:00:1d.2"
>i/o:0 0xe880 - 0xe89f (0x20) "uhci_hcd"
>i/o:0 0xec00 - 0xec1f (0x20) "0000:00:1d.3"
>i/o:0 0xec00 - 0xec1f (0x20) "uhci_hcd"
>i/o:0 0xffa0 - 0xffaf (0x10) "0000:00:1f.1"
>i/o:1 0xffa0 - 0xffa7 (0x08) "ide0"
>i/o:1 0xffa8 - 0xffaf (0x08) "ide1"
>irq:1  0 (   192272) "timer"
>irq:0  1 (      458) "i8042"
>irq:1  2 (        0) "cascade"
>irq:0  3 (        1) "uhci_hcd:usb2" "eth0"
>irq:0  5 (        3) "uhci_hcd:usb3" "ohci1394"
>irq:1  8 (        2) "rtc"
>irq:0  9 (     2425) "acpi"
>irq:0 10 (     4637) "libata" "uhci_hcd:usb4"
>irq:0 11 (        0) "uhci_hcd:usb1" "ehci_hcd:usb5"
>irq:0 12 (    15024) "i8042"
>irq:1 14 (     6744) "ide0"
>dma:1 4 "cascade"
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/rmmod lp" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe lp" -----
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>>> block.2: sysfs drivers
>>> block.3: cdrom
>----- /proc/sys/dev/cdrom/info -----
>drive name:		hda
>drive speed:		24
>drive # of slots:	1
>Can close tray:		1
>Can open tray:		1
>Can lock tray:		1
>Can change speed:	1
>Can select disk:	0
>Can read multisession:	1
>Can read MCN:		1
>Reports media changed:	1
>Can play audio:		1
>Can write CD-R:		1
>Can write CD-RW:	1
>Can read DVD:		1
>Can write DVD-R:	1
>Can write DVD-RAM:	0
>Can read MRW:		1
>Can write MRW:		1
>Can write RAM:		1
>----- /proc/sys/dev/cdrom/info end -----
>>> block.4: partition
>----- /proc/partitions -----
>     8     0   78150744 sda
>     8     1   31455238 sda1
>     8     2    2626627 sda2
>     8     3   10490445 sda3
>     8     4   33575850 sda4
>----- /proc/partitions end -----
>disks:
>  sda
>partitions:
>  sda1
>  sda2
>  sda3
>  sda4
>>> block.5: get sysfs block dev data
>  ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  block: name = hda, path = /block/hda
>    dev = 3:0
>    range = 1
>    block device: bus = ide, bus_id = 0.0 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  block: name = loop0, path = /block/loop0
>    dev = 7:0
>    range = 1
>  block: name = loop1, path = /block/loop1
>    dev = 7:1
>    range = 1
>  block: name = loop2, path = /block/loop2
>    dev = 7:2
>    range = 1
>  block: name = loop3, path = /block/loop3
>    dev = 7:3
>    range = 1
>  block: name = loop4, path = /block/loop4
>    dev = 7:4
>    range = 1
>  block: name = loop5, path = /block/loop5
>    dev = 7:5
>    range = 1
>  block: name = loop6, path = /block/loop6
>    dev = 7:6
>    range = 1
>  block: name = loop7, path = /block/loop7
>    dev = 7:7
>    range = 1
>  block: name = ram0, path = /block/ram0
>    dev = 1:0
>    range = 1
>  block: name = ram10, path = /block/ram10
>    dev = 1:10
>    range = 1
>  block: name = ram11, path = /block/ram11
>    dev = 1:11
>    range = 1
>  block: name = ram12, path = /block/ram12
>    dev = 1:12
>    range = 1
>  block: name = ram13, path = /block/ram13
>    dev = 1:13
>    range = 1
>  block: name = ram14, path = /block/ram14
>    dev = 1:14
>    range = 1
>  block: name = ram15, path = /block/ram15
>    dev = 1:15
>    range = 1
>  block: name = ram1, path = /block/ram1
>    dev = 1:1
>    range = 1
>  block: name = ram2, path = /block/ram2
>    dev = 1:2
>    range = 1
>  block: name = ram3, path = /block/ram3
>    dev = 1:3
>    range = 1
>  block: name = ram4, path = /block/ram4
>    dev = 1:4
>    range = 1
>  block: name = ram5, path = /block/ram5
>    dev = 1:5
>    range = 1
>  block: name = ram6, path = /block/ram6
>    dev = 1:6
>    range = 1
>  block: name = ram7, path = /block/ram7
>    dev = 1:7
>    range = 1
>  block: name = ram8, path = /block/ram8
>    dev = 1:8
>    range = 1
>  block: name = ram9, path = /block/ram9
>    dev = 1:9
>    range = 1
>  block: name = sda, path = /block/sda
>    dev = 8:0
>    range = 16
>    block device: bus = scsi, bus_id = 0:0:0:0 driver = sd
>      path = /devices/pci0000:00/0000:00:1e.0/0000:01:07.0/host0/target0:0:0/0:0:0:0
>    vendor = ATA
>    model = SAMSUNG HM080JI
>    rev = YC10
>    type = 0
>>> block.5: /dev/sda
>>> block.5.1: /dev/sda geo
>  dev = /dev/sda, fd = 3
>  open ok, fd = 3
>/dev/sda: ioctl(geo) ok
>/dev/sda: ioctl(block size) ok
>/dev/sda: ioctl(disk size) ok
>>> block.5.2: /dev/sda serial
>  serial id len: 20
>>> scsi.1: scsi modules
>>> scsi.2: scsi tape
>>> scsi.3: scsi generic
>  scsi: name = sg0, path = /class/scsi_generic/sg0
>    dev = 21:0
>    scsi device: bus = scsi, bus_id = 0:0:0:0 driver = sd
>      path = /devices/pci0000:00/0000:00:1e.0/0000:01:07.0/host0/target0:0:0/0:0:0:0
>>> usb.1: sysfs drivers
>>> usb.2: usb
>  usb dev: /devices/pci0000:00/0000:00:1d.0/usb1
>  usb dev: /devices/pci0000:00/0000:00:1d.1/usb2
>  usb dev: /devices/pci0000:00/0000:00:1d.2/usb3
>  usb dev: /devices/pci0000:00/0000:00:1d.3/usb4
>  usb dev: /devices/pci0000:00/0000:00:1d.7/usb5
>  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:1d.0/usb1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13.3-2-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.0"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:1d.1/usb2
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13.3-2-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.1"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 3-0:1.0, bus_id = 3-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 3-0:1.0 @ /devices/pci0000:00/0000:00:1d.2/usb3
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13.3-2-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.2"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 4-0:1.0, bus_id = 4-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 4-0:1.0 @ /devices/pci0000:00/0000:00:1d.3/usb4
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13.3-2-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:00:1d.3"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 5-0:1.0, bus_id = 5-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 5-0:1.0 @ /devices/pci0000:00/0000:00:1d.7/usb5
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 1
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13.3-2-default ehci_hcd"
>    product = "EHCI Host Controller"
>    serial = "0000:00:1d.7"
>    bcdDevice = 0206
>    speed = "480"
>  usb device: name = usb1, bus_id = usb1, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.0/usb1
>  usb device: name = usb2, bus_id = usb2, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.1/usb2
>  usb device: name = usb3, bus_id = usb3, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.2/usb3
>  usb device: name = usb4, bus_id = usb4, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.3/usb4
>  usb device: name = usb5, bus_id = usb5, bus = usb
>    path = /devices/pci0000:00/0000:00:1d.7/usb5
>>> usb.3.1: joydev mod
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> usb.3.3: input
>  input: name = event0, path = /class/input/event0
>    dev = 13:64
>  input: name = event1, path = /class/input/event1
>    dev = 13:65
>    input device: bus = serio, bus_id = serio4 driver = atkbd
>      path = /devices/platform/i8042/serio4
>  input: name = event2, path = /class/input/event2
>    dev = 13:66
>    input device: bus = serio, bus_id = serio1 driver = psmouse
>      path = /devices/platform/i8042/serio1
>  input: name = mice, path = /class/input/mice
>    dev = 13:63
>  input: name = mouse0, path = /class/input/mouse0
>    dev = 13:32
>    input device: bus = serio, bus_id = serio1 driver = psmouse
>      path = /devices/platform/i8042/serio1
>>> usb.3.4: lp
>>> usb.3.5: serial
>>> edd.1: edd mod
>>> edd.2: edd info
>edd: 0x80
>  size: 156301488
>  chs default: 9729/255/63
>  chs legacy: 1024/255/63
>  caps: fixed edd 
>  attached: #0 
>>> modem.1: serial
>******  started child process 4792 (15s/120s)  ******
>******  stopped child process 4792 (120s)  ******
>>> mouse.2: serial
>******  started child process 4793 (20s/20s)  ******
>******  stopped child process 4793 (20s)  ******
>>> input.1: joydev mod
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>  I: Bus=0010 Vendor=001f Product=0001 Version=0100
>  N: Name="PC Speaker"
>  P: Phys=isa0061/input0
>  H: Handlers=kbd event0 
>  B: EV=40001 
>  B: SND=6 
>  
>  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
>  N: Name="AT Translated Set 2 keyboard"
>  P: Phys=isa0060/serio0/input0
>  H: Handlers=kbd event1 
>  B: EV=120013 
>  B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe 
>  B: MSC=10 
>  B: LED=7 
>  
>  I: Bus=0011 Vendor=0002 Product=0007 Version=0000
>  N: Name="SynPS/2 Synaptics TouchPad"
>  P: Phys=isa0060/serio2/input0
>  H: Handlers=mouse0 event2 
>  B: EV=b 
>  B: KEY=6420 0 70000 0 0 0 0 0 0 0 0 
>  B: ABS=11000003 
>  
>----- /proc/bus/input/devices end -----
>bus = 16, name = PC Speaker
>  handlers = kbd event0
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = AT Translated Set 2 keyboard
>  handlers = kbd event1
>  key = 000000040200000003802078f840d001f2ffffdfffeffffffffffffffffffffe
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 17, name = SynPS/2 Synaptics TouchPad
>  handlers = mouse0 event2
>  key = 0000642000000000000700000000000000000000000000000000000000000000000000000000000000000000
>  abs = 11000003
>  mouse buttons = 3
>  mouse wheels = 0
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: GenuineIntel
>  cpu family	: 6
>  model		: 13
>  model name	: Intel(R) Pentium(R) M processor 1.86GHz
>  stepping	: 8
>  cpu MHz		: 800.171
>  cache size	: 2048 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 2
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe est tm2
>  bogomips	: 1601.74
>  
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>/dev/console: major 4, minor 1
>>> fb.1: read info
>fb: size 1024 x 768
>fb: timing 78.65 MHz, 59.95 kHz, 75.69 Hz
>>> net.1: get network data
>  net interface: name = eth0, classname = net, path = /class/net/eth0
>    type = 1
>    hw_addr = 00:03:0d:30:a6:fd
>    net device: path = /devices/pci0000:00/0000:00:1e.0/0000:01:05.0
>    ethtool driver: r8169
>    ethtool    bus: 0000:01:05.0
>  net interface: name = lo, classname = net, path = /class/net/lo
>    type = 772
>    hw_addr = 00:00:00:00:00:00
>  net interface: name = sit0, classname = net, path = /class/net/sit0
>    type = 776
>    hw_addr = 00:00:00:00
>  eth0: ethtool link state: 0
>  lo: ethtool link state: 1
>  sit0: GLINK ethtool error: Invalid argument
>>> pppoe.1: looking for pppoe
>>> pppoe.2: discovery
>Attempt number 1
>eth0: Sending PADI packet
>Timeout waiting for PADO packets
>Attempt number 2
>eth0: Sending PADI packet
>Timeout waiting for PADO packets
>>> 38.1: detecting wlan features
>>> 38.2: assign udi
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4.1: /dev/sda
>  read_block0: 512 bytes (5s, 0us)
>>> int.4: floppy
>>> int.5: bios
>>> int.6: mouse
>>> int.15: system info
>  system type: notebook
>  acpi: 1
>>> int.7: hdb
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>  P: /block/hda
>  N: hda
>  S: disk/by-id/ata-HL-DT-ST_DVD-RW_GCA-4080N_K0056OC0352
>  S: disk/by-path/pci-0000:00:1f.1-ide-0:0
>  S: dvdrecorder
>  S: cdrom
>  S: dvd
>  S: cdrecorder
>  E: ID_TYPE=cd
>  E: ID_MODEL=HL-DT-ST_DVD-RW_GCA-4080N
>  E: ID_SERIAL=K0056OC0352
>  E: ID_REVISION=0W34
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:1f.1-ide-0:0
>  
>  P: /block/sda
>  N: sda
>  S: disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746
>  S: disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0
>  E: ID_VENDOR=ATA
>  E: ID_MODEL=SAMSUNG_HM080JI
>  E: ID_REVISION=YC10
>  E: ID_SERIAL=SATA_SAMSUNG_HM080JIS082J10Y707746
>  E: ID_TYPE=disk
>  E: ID_BUS=scsi
>  E: ID_PATH=pci-0000:01:07.0-scsi-0:0:0:0
>  
>  P: /block/sda/sda1
>  N: sda1
>  S: disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part1
>  S: disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part1
>  S: disk/by-uuid/C4E49A63E49A580E
>  S: disk/by-label/Local_hard_disc
>  E: ID_VENDOR=ATA
>  E: ID_MODEL=SAMSUNG_HM080JI
>  E: ID_REVISION=YC10
>  E: ID_SERIAL=SATA_SAMSUNG_HM080JIS082J10Y707746
>  E: ID_TYPE=disk
>  E: ID_BUS=scsi
>  E: ID_PATH=pci-0000:01:07.0-scsi-0:0:0:0
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=ntfs
>  E: ID_FS_VERSION=3.1
>  E: ID_FS_UUID=C4E49A63E49A580E
>  E: ID_FS_LABEL=Local
>  E: ID_FS_LABEL_SAFE=Local_hard_disc
>  
>  P: /block/sda/sda2
>  N: sda2
>  S: disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part2
>  S: disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part2
>  E: ID_VENDOR=ATA
>  E: ID_MODEL=SAMSUNG_HM080JI
>  E: ID_REVISION=YC10
>  E: ID_SERIAL=SATA_SAMSUNG_HM080JIS082J10Y707746
>  E: ID_TYPE=disk
>  E: ID_BUS=scsi
>  E: ID_PATH=pci-0000:01:07.0-scsi-0:0:0:0
>  E: ID_FS_USAGE=other
>  E: ID_FS_TYPE=swap
>  E: ID_FS_VERSION=2
>  E: ID_FS_UUID=
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/sda/sda3
>  N: sda3
>  S: disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part3
>  S: disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part3
>  S: disk/by-uuid/10fac02a-6a2c-4b62-b5c8-b3f2753d0537
>  E: ID_VENDOR=ATA
>  E: ID_MODEL=SAMSUNG_HM080JI
>  E: ID_REVISION=YC10
>  E: ID_SERIAL=SATA_SAMSUNG_HM080JIS082J10Y707746
>  E: ID_TYPE=disk
>  E: ID_BUS=scsi
>  E: ID_PATH=pci-0000:01:07.0-scsi-0:0:0:0
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=ext3
>  E: ID_FS_VERSION=
>  E: ID_FS_UUID=10fac02a-6a2c-4b62-b5c8-b3f2753d0537
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/sda/sda4
>  N: sda4
>  S: disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part4
>  S: disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part4
>  S: disk/by-uuid/b5898f8b-8264-42ec-8b14-a259ad041583
>  E: ID_VENDOR=ATA
>  E: ID_MODEL=SAMSUNG_HM080JI
>  E: ID_REVISION=YC10
>  E: ID_SERIAL=SATA_SAMSUNG_HM080JIS082J10Y707746
>  E: ID_TYPE=disk
>  E: ID_BUS=scsi
>  E: ID_PATH=pci-0000:01:07.0-scsi-0:0:0:0
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=ext3
>  E: ID_FS_VERSION=
>  E: ID_FS_UUID=b5898f8b-8264-42ec-8b14-a259ad041583
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /class/input/event0
>  N: input/event0
>  
>  P: /class/input/event1
>  N: input/event1
>  
>  P: /class/input/event2
>  N: input/event2
>  
>  P: /class/input/mice
>  N: input/mice
>  
>  P: /class/input/mouse0
>  N: input/mouse0
>  
>  P: /class/usb_device/usbdev1.1
>  N: usbdev1.1
>  S: bus/usb/1/1
>  
>  P: /class/usb_device/usbdev2.1
>  N: usbdev2.1
>  S: bus/usb/2/1
>  
>  P: /class/usb_device/usbdev3.1
>  N: usbdev3.1
>  S: bus/usb/3/1
>  
>  P: /class/usb_device/usbdev4.1
>  N: usbdev4.1
>  S: bus/usb/4/1
>  
>  P: /class/usb_device/usbdev5.1
>  N: usbdev5.1
>  S: bus/usb/5/1
>  
>-----  udevinfo end -----
>/block/hda
>  name: hda
>  links: disk/by-id/ata-HL-DT-ST_DVD-RW_GCA-4080N_K0056OC0352, disk/by-path/pci-0000:00:1f.1-ide-0:0, dvdrecorder, cdrom, dvd, cdrecorder
>/block/sda
>  name: sda
>  links: disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746, disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0
>/block/sda/sda1
>  name: sda1
>  links: disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part1, disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part1, disk/by-uuid/C4E49A63E49A580E, disk/by-label/Local_hard_disc
>/block/sda/sda2
>  name: sda2
>  links: disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part2, disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part2
>/block/sda/sda3
>  name: sda3
>  links: disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part3, disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part3, disk/by-uuid/10fac02a-6a2c-4b62-b5c8-b3f2753d0537
>/block/sda/sda4
>  name: sda4
>  links: disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part4, disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part4, disk/by-uuid/b5898f8b-8264-42ec-8b14-a259ad041583
>/class/input/event0
>  name: input/event0
>/class/input/event1
>  name: input/event1
>/class/input/event2
>  name: input/event2
>/class/input/mice
>  name: input/mice
>/class/input/mouse0
>  name: input/mouse0
>/class/usb_device/usbdev1.1
>  name: usbdev1.1
>  links: bus/usb/1/1
>/class/usb_device/usbdev2.1
>  name: usbdev2.1
>  links: bus/usb/2/1
>/class/usb_device/usbdev3.1
>  name: usbdev3.1
>  links: bus/usb/3/1
>/class/usb_device/usbdev4.1
>  name: usbdev4.1
>  links: bus/usb/4/1
>/class/usb_device/usbdev5.1
>  name: usbdev5.1
>  links: bus/usb/5/1
>>> int.13: device names
>>> int.14: soft raid
>----- soft raid devices -----
>----- soft raid devices end -----
>>> int.15: geo
>>> int.16: parent
>  prop read: rdCR.lZF+r4EgHp4 (failed)
>  old prop read: rdCR.lZF+r4EgHp4 (failed)
>  prop read: rdCR.n_7QNeEnh23 (failed)
>  old prop read: rdCR.n_7QNeEnh23 (failed)
>  prop read: rdCR.EMpH5pjcahD (failed)
>  old prop read: rdCR.EMpH5pjcahD (failed)
>  prop read: rdCR.f5u1ucRm+H9 (failed)
>  old prop read: rdCR.f5u1ucRm+H9 (failed)
>  prop read: rdCR.8uRK7LxiIA2 (failed)
>  old prop read: rdCR.8uRK7LxiIA2 (failed)
>  prop read: rdCR.AJKleuxpiP0 (failed)
>  old prop read: rdCR.AJKleuxpiP0 (failed)
>  prop read: rdCR.hWmSPAStPX7 (failed)
>  old prop read: rdCR.hWmSPAStPX7 (failed)
>  prop read: rdCR.9N+EecqykME (failed)
>  old prop read: rdCR.9N+EecqykME (failed)
>  prop read: rdCR.DziBbWO85o5 (failed)
>  old prop read: rdCR.DziBbWO85o5 (failed)
>  prop read: rdCR.CxwsZFjVASF (failed)
>  old prop read: rdCR.CxwsZFjVASF (failed)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2590 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2591 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2668 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2660 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2658 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2659 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_265a (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_265b (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_265c (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2448 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_2641 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_266f (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_266a (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_8086_4220 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_104c_8023 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10ec_8169 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3249 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_c8 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c01_0 (failed)
>  prop read: z9pp.gNN83gfynbD (failed)
>  old prop read: z9pp.gNN83gfynbD (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0200 (failed)
>  prop read: QL3u.ld94kxNGZf5 (failed)
>  old prop read: QL3u.ld94kxNGZf5 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0b00 (failed)
>  prop read: tWJy.WYwRElrJa93 (failed)
>  old prop read: tWJy.WYwRElrJa93 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0303 (failed)
>  prop read: KiZ0.xhndlW9HXJ7 (failed)
>  old prop read: KiZ0.xhndlW9HXJ7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_SYN0802 (failed)
>  prop read: ntp4.3yLzP2Xo6h7 (failed)
>  old prop read: ntp4.3yLzP2Xo6h7 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0800 (failed)
>  prop read: E349.bvKf3UMzZfE (failed)
>  old prop read: E349.bvKf3UMzZfE (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c04 (failed)
>  prop read: hEKD.DE8RM9cWQQ8 (failed)
>  old prop read: hEKD.DE8RM9cWQQ8 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02_1 (failed)
>  prop read: NhVi.B+yZ9Ve8gC1 (failed)
>  old prop read: NhVi.B+yZ9Ve8gC1 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02_0 (failed)
>  prop read: qslm.B+yZ9Ve8gC1 (failed)
>  old prop read: qslm.B+yZ9Ve8gC1 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02 (failed)
>  prop read: H20r.B+yZ9Ve8gC1 (failed)
>  old prop read: H20r.B+yZ9Ve8gC1 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c14 (failed)
>  prop read: iT2w.T6YKzQJWT82 (failed)
>  old prop read: iT2w.T6YKzQJWT82 (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c01 (failed)
>  prop read: 9fI_.gNN83gfynbD (failed)
>  old prop read: 9fI_.gNN83gfynbD (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_K0056OC0352 (ok)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_S082J10Y707746 (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_C4E49A63E49A580E (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_part2_size_2689666560 (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_10fac02a_6a2c_4b62_b5c8_b3f2753d0537 (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_b5898f8b_8264_42ec_8b14_a259ad041583 (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0 (failed)
>  prop read: k4bc.kHgW+dCdTY7 (failed)
>  old prop read: k4bc.kHgW+dCdTY7 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0 (failed)
>  prop read: pBe4.V0l5NO+KQqE (failed)
>  old prop read: pBe4.V0l5NO+KQqE (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0 (failed)
>  prop read: uIhY.Glpgk8o2N66 (failed)
>  old prop read: uIhY.Glpgk8o2N66 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0 (failed)
>  prop read: zPk0.1UuF6vamJOD (failed)
>  old prop read: zPk0.1UuF6vamJOD (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0 (failed)
>  prop read: 2XnU.bSbYIvXTmJ5 (failed)
>  old prop read: 2XnU.bSbYIvXTmJ5 (failed)
>  prop read: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input (ok)
>  prop read: /org/freedesktop/Hal/devices/computer_i8042_Aux_1_Port_logicaldev_input (ok)
>  prop read: rdCR.j8NaKXDZtZ6 (failed)
>  old prop read: rdCR.j8NaKXDZtZ6 (failed)
>  prop read: rdCR.EY_qmtb9YY0 (failed)
>  old prop read: rdCR.EY_qmtb9YY0 (failed)
>  prop read: /org/freedesktop/Hal/devices/net_00_03_0d_30_a6_fd (failed)
>  prop read: usDW.ndpeucax6V1 (failed)
>  old prop read: usDW.ndpeucax6V1 (failed)
>  prop read: ZsBS.GQNx7L4uPNA (failed)
>  old prop read: ZsBS.GQNx7L4uPNA (failed)
>  prop read: wl2P.nfEXJulusj6 (failed)
>  old prop read: wl2P.nfEXJulusj6 (failed)
>----- /proc/modules -----
>  lp 11460 0 - Live 0xe0ead000
>  parport_pc 38980 0 - Live 0xe0e92000
>  parport 33864 2 lp,parport_pc, Live 0xe0e9e000
>  af_packet 21384 0 - Live 0xe0ed4000
>  st 39072 0 - Live 0xe0ec9000
>  sr_mod 16548 0 - Live 0xe0eb7000
>  ipt_pkttype 1664 1 - Live 0xe0e88000
>  ipt_LOG 6912 7 - Live 0xe0e8c000
>  ipt_limit 2304 7 - Live 0xe0e86000
>  cpufreq_ondemand 6172 1 - Live 0xe13fb000
>  cpufreq_userspace 4572 0 - Live 0xe140f000
>  cpufreq_powersave 1792 0 - Live 0xe13f9000
>  speedstep_centrino 7508 1 - Live 0xe1409000
>  freq_table 4612 1 speedstep_centrino, Live 0xe1402000
>  joydev 9408 0 - Live 0xe1405000
>  button 7056 0 - Live 0xe13c1000
>  battery 10244 0 - Live 0xe13fe000
>  ac 5252 0 - Live 0xe13c4000
>  edd 9824 0 - Live 0xe13f5000
>  ide_cd 39684 0 - Live 0xe13a0000
>  cdrom 37024 2 sr_mod,ide_cd, Live 0xe1395000
>  ipw2200 172296 0 - Live 0xe13c9000
>  ieee80211 51140 1 ipw2200, Live 0xe1387000
>  ieee80211_crypt 5508 1 ieee80211, Live 0xe134b000
>  firmware_class 9984 1 ipw2200, Live 0xe1350000
>  ohci1394 32948 0 - Live 0xe12f6000
>  ieee1394 97336 1 ohci1394, Live 0xe135e000
>  i2c_i801 8844 0 - Live 0xe1226000
>  i2c_core 20496 1 i2c_i801, Live 0xe12bd000
>  r8169 27272 0 - Live 0xe12b5000
>  generic 4484 0 [permanent], Live 0xe121b000
>  ehci_hcd 32136 0 - Live 0xe12ac000
>  uhci_hcd 32016 0 - Live 0xe128c000
>  usbcore 113024 3 ehci_hcd,uhci_hcd, Live 0xe12ce000
>  intel_agp 22044 1 - Live 0xe122a000
>  agpgart 33224 1 intel_agp, Live 0xe1277000
>  shpchp 88804 0 - Live 0xe1295000
>  pci_hotplug 26292 1 shpchp, Live 0xe126f000
>  ip6t_REJECT 5504 3 - Live 0xe121e000
>  ipt_REJECT 5632 3 - Live 0xe1218000
>  ipt_state 1920 12 - Live 0xe1216000
>  iptable_mangle 2688 0 - Live 0xe11f1000
>  iptable_nat 22228 0 - Live 0xe1206000
>  iptable_filter 2816 1 - Live 0xe1071000
>  ip6table_mangle 2304 0 - Live 0xe085a000
>  ip_conntrack 42168 2 ipt_state,iptable_nat, Live 0xe11fa000
>  ip_tables 19712 8 ipt_pkttype,ipt_LOG,ipt_limit,ipt_REJECT,ipt_state,iptable_mangle,iptable_nat,iptable_filter, Live 0xe1051000
>  ip6table_filter 2688 1 - Live 0xe0830000
>  ip6_tables 18304 3 ip6t_REJECT,ip6table_mangle,ip6table_filter, Live 0xe1058000
>  ipv6 242752 11 ip6t_REJECT, Live 0xe1232000
>  dm_mod 55356 0 - Live 0xe105f000
>  ext3 130696 2 - Live 0xe1074000
>  jbd 60068 1 ext3, Live 0xe0870000
>  sg 36256 0 - Live 0xe1043000
>  fan 4996 0 - Live 0xe0854000
>  thermal 14472 0 - Live 0xe0827000
>  processor 24380 2 speedstep_centrino,thermal, Live 0xe0869000
>  sata_via 8836 3 - Live 0xe084d000
>  libata 48516 1 sata_via, Live 0xe085c000
>  piix 9988 0 [permanent], Live 0xe082c000
>  sd_mod 18704 4 - Live 0xe081b000
>  scsi_mod 131432 5 st,sr_mod,sg,libata,sd_mod, Live 0xe1021000
>  ide_disk 17280 0 - Live 0xe0821000
>  ide_core 122508 4 ide_cd,generic,piix,ide_disk, Live 0xe1002000
>----- /proc/modules end -----
>  used irqs: 0,1,2,3,5,8,9,10,11,12,14
>=========== end debug info ============
>01: None 00.0: 10105 BIOS
>  [Created at bios.154]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: off
>    Caps Lock: off
>  Base Memory: 637 kB
>  PnP BIOS: @@@0000
>  BIOS: extended read supported
>  MP spec rev 1.4 info:
>    OEM id: "TEMPLATE"
>    Product id: "ETEMPLATE"
>    1 CPUs (0 disabled)
>  BIOS32 Service Directory Entry: 0xf0010
>  SMBIOS Version: 2.3
>  BIOS Info: #0
>    Vendor: "American Megatrends Inc."
>    Version: "1.01C"
>    Date: "04/29/2005"
>    Start Address: 0xf0000
>    ROM Size: 512 kB
>    Features: 0x0133000000017f8bde90
>      ISA supported
>      PCI supported
>      PnP supported
>      APM supported
>      BIOS flashable
>      BIOS shadowing allowed
>      ESCD supported
>      CD boot supported
>      Selectable boot supported
>      BIOS ROM socketed
>      EDD spec supported
>      1.2MB Floppy supported
>      720kB Floppy supported
>      2.88MB Floppy supported
>      Print Screen supported
>      8042 Keyboard Services supported
>      Serial Services supported
>      Printer Services supported
>      CGA/Mono Video supported
>      ACPI supported
>      USB Legacy supported
>      LS-120 boot supported
>      ATAPI ZIP boot supported
>      BIOS Boot Spec supported
>  System Info: #1
>    Manufacturer: "FUJITSU SIEMENS"
>    Product: "Amilo M3438 Series"
>    Serial: "71EB79C0"
>    UUID: undefined, but settable
>    Wake-up: 0x06 (Power Switch)
>  Board Info: #2
>    Product: "P71EN0"
>    Type: 0x0a (Motherboard)
>    Features: 0x09
>      Hosting Board
>      Replaceable
>    Chassis: #3
>  Chassis Info: #3
>    Manufacturer: "FUJITSU SIEMENS"
>    Type: 0x0a (Notebook)
>    Bootup State: 0x03 (Safe)
>    Power Supply State: 0x03 (Safe)
>    Thermal State: 0x03 (Safe)
>    Security Status: 0x03 (None)
>  Processor Info: #4
>    Socket: "CPU 1"
>    Socket Type: 0x01 (Other)
>    Socket Status: Populated
>    Type: 0x03 (CPU)
>    Family: 0x01 (Other)
>    Manufacturer: "Intel"
>    Version: "Intel(R) Pentium(R) M processor 750"
>    Serial: "To Be Filled By O.E.M."
>    Asset Tag: "To Be Filled By O.E.M."
>    Part Number: "To Be Filled By O.E.M."
>    Processor ID: 0xafe9fbff000006d8
>    Status: 0x01 (Enabled)
>    External Clock: 532 MHz
>    Max. Speed: 1862 MHz
>    Current Speed: 1862 MHz
>    L1 Cache: #5
>    L2 Cache: #6
>    L3 Cache: #7
>  Cache Info: #5
>    Designation: "L1-Cache"
>    Level: L1
>    State: Enabled
>    Mode: 0x02 (Varies with Memory Address)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x05 (Single-bit)
>    Type: 0x04 (Data)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 32 kB
>    Current Size: 32 kB
>    Supported SRAM Types: 0x0010 (Pipeline Burst)
>    Current SRAM Type: 0x0010 (Pipeline Burst)
>  Cache Info: #6
>    Designation: "L2-Cache"
>    Level: L2
>    State: Enabled
>    Mode: 0x02 (Varies with Memory Address)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x05 (Single-bit)
>    Type: 0x05 (Unified)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 2048 kB
>    Current Size: 2048 kB
>    Supported SRAM Types: 0x0010 (Pipeline Burst)
>    Current SRAM Type: 0x0010 (Pipeline Burst)
>  Cache Info: #7
>    Designation: "L3-Cache"
>    Level: L3
>    State: Disabled
>    Mode: 0x03 (Unknown)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x02 (Unknown)
>    Associativity: 0x02 (Unknown)
>    Supported SRAM Types: 0x0002 (Unknown)
>    Current SRAM Type: 0x0002 (Unknown)
>  Port Connector: #8
>    Type: 0x0e (Mouse Port)
>    Internal Designator: "J1A1"
>    External Designator: "PS2Mouse"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #9
>    Type: 0x0d (Keyboard Port)
>    Internal Designator: "J1A1"
>    External Designator: "Keyboard"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #10
>    Type: 0x10 (USB)
>    Internal Designator: "J2A2"
>    External Designator: "USB1"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #11
>    Type: 0x10 (USB)
>    Internal Designator: "J2A2"
>    External Designator: "USB2"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #12
>    Type: 0x05 (Parallel Port ECP/EPP)
>    Internal Designator: "J4A1"
>    External Designator: "LPT 1"
>    External Connector: 0x04 (DB-25 pin male)
>  Port Connector: #13
>    Type: 0x09 (Serial Port 16550A Compatible)
>    Internal Designator: "J2A1"
>    External Designator: "COM A"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #14
>    Type: 0x1d (Audio Port)
>    Internal Designator: "J6A1"
>    External Designator: "Audio Mic In"
>    External Connector: 0x1f (Mini-jack [headphones])
>  Port Connector: #15
>    Type: 0x1d (Audio Port)
>    Internal Designator: "J6A1"
>    External Designator: "Audio Line In"
>    External Connector: 0x1f (Mini-jack [headphones])
>  Port Connector: #16
>    Type: 0x1d (Audio Port)
>    Internal Designator: "J6B1 - AUX IN"
>  Port Connector: #17
>    Type: 0x1d (Audio Port)
>    Internal Designator: "J6B2 - CDIN"
>  Port Connector: #18
>    Type: 0xff (Other)
>    Internal Designator: "J6J2 - PRI IDE"
>  Port Connector: #19
>    Type: 0xff (Other)
>    Internal Designator: "J6J1 - SEC IDE"
>  Port Connector: #20
>    Type: 0xff (Other)
>    Internal Designator: "J4J1 - FLOPPY"
>  Port Connector: #21
>    Type: 0xff (Other)
>    Internal Designator: "J9H1 - FRONT PNL"
>  Port Connector: #22
>    Type: 0xff (Other)
>    Internal Designator: "J1B1 - CHASSIS REAR FAN"
>  Port Connector: #23
>    Type: 0xff (Other)
>    Internal Designator: "J2F1 - CPU FAN"
>  Port Connector: #24
>    Type: 0xff (Other)
>    Internal Designator: "J8B4 - FRONT FAN"
>  Port Connector: #25
>    Type: 0xff (Other)
>    Internal Designator: "J9G2 - FNT USB"
>  Port Connector: #26
>    Type: 0xff (Other)
>    Internal Designator: "J6C3 - FP AUD"
>  Port Connector: #27
>    Type: 0xff (Other)
>    Internal Designator: "J9G1 - CONFIG"
>  Port Connector: #28
>    Type: 0xff (Other)
>    Internal Designator: "J8C1 - SCSI LED"
>  Port Connector: #29
>    Type: 0xff (Other)
>    Internal Designator: "J9J2 - INTRUDER"
>  Port Connector: #30
>    Type: 0xff (Other)
>    Internal Designator: "J9G4 - ITP"
>  Port Connector: #31
>    Type: 0xff (Other)
>    Internal Designator: "J2H1 - MAIN POWER"
>  System Slot: #32
>    Designation: "AGP"
>    Type: 0x11 (AGP 4X)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x04 (In Use)
>    Length: 0x03 (Short)
>    Slot ID: 0
>    Characteristics: 0x010c (3.3 V, Shared, PME#)
>  System Slot: #33
>    Designation: "PCI1"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x03 (Short)
>    Slot ID: 1
>    Characteristics: 0x010c (3.3 V, Shared, PME#)
>  On Board Devices: #34
>    Video: "To Be Filled By O.E.M."
>  Language Info: #35
>    Languages: en|US|iso8859-1
>    Current: en|US|iso8859-1
>  Type 15 Record: #36
>    Data 00: 0f 37 24 00 f0 03 10 18 20 18 04 01 00 00 00 00
>    Data 10: 02 00 00 00 01 09 02 01 03 02 03 03 02 05 02 08
>    Data 20: 04 09 03 0a 03 10 06 90 04 ff ff ff ff ff ff ff
>    Data 30: ff ff ff ff ff ff ff
>  Physical Memory Array: #37
>    Use: 0x03 (System memory)
>    Location: 0x03 (Motherboard)
>    Slots: 2
>    Max. Size: 4 GB
>    ECC: 0x03 (None)
>  Memory Array Mapping: #38
>    Memory Array: #37
>    Partition Width: 4
>    Start Address: 0x00000000
>    End Address: 0x20000400
>  Memory Device: #39
>    Location: "DIMM0"
>    Bank: "BANK0"
>    Manufacturer: "Manufacturer0"
>    Serial: "SerNum0"
>    Asset Tag: "AssetTagNum0"
>    Part Number: "PartNum0"
>    Memory Array: #37
>    Form Factor: 0x09 (DIMM)
>    Type: 0x0f (SDRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits
>    Size: 256 MB
>  Memory Device Mapping: #40
>    Memory Device: #39
>    Array Mapping: #38
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 1
>    Start Address: 0x00000000
>    End Address: 0x10000000
>  Memory Device: #41
>    Location: "DIMM1"
>    Bank: "BANK1"
>    Manufacturer: "Manufacturer1"
>    Serial: "SerNum1"
>    Asset Tag: "AssetTagNum1"
>    Part Number: "PartNum1"
>    Memory Array: #37
>    Form Factor: 0x09 (DIMM)
>    Type: 0x02 (Unknown)
>    Type Detail: 0x0004 (Unknown)
>    Data Width: 64 bits
>    Size: No Memory Installed
>  Inactive Record: #42
>    Data 00: 7e 13 2a 00 00 00 00 00 00 00 00 00 29 00 26 00
>    Data 10: 01 00 00
>  Type 32 Record: #43
>    Data 00: 20 14 2b 00 00 00 00 00 00 00 00 00 00 00 00 00
>    Data 10: 00 00 00 00
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>02: None 00.0: 10107 System
>  [Created at sys.56]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>03: None 00.0: 10104 FPU
>  [Created at misc.190]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>04: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.204]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>05: None 00.0: 0800 PIC (8259)
>  [Created at misc.217]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  IRQ: 2 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0802 Timer (8254)
>  [Created at misc.228]
>  Unique ID: rdCR.AJKleuxpiP0
>  Hardware Class: unknown
>  Model: "Timer"
>  IRQ: 0 (192272 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0803 RTC (Generic)
>  [Created at misc.239]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (2 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 0900 Keyboard controller
>  [Created at misc.249]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>09: None 00.0: 10400 PS/2 Controller
>  [Created at misc.302]
>  Unique ID: rdCR.DziBbWO85o5
>  Hardware Class: unknown
>  Model: "PS/2 Controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>11: None 00.0: 10102 Main Memory
>  [Created at memory.59]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0x1ffcffff (rw)
>  Memory Size: 512 MB
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>12: PCI 00.0: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2590
>  Unique ID: qLht.Wm_JWv0YhID
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "Fujitsu Siemens Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2590 "Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x04
>  Driver: "agpgart-intel"
>  Module Alias: "pci:v00008086d00002590sv00001734sd0000107Cbc06sc00i00"
>  Driver Info #0:
>    Driver Status: intel_agp is active
>    Driver Activation Cmd: "modprobe intel_agp"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>13: PCI 01.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2591
>  Unique ID: vSkL.qMNzks0IR_8
>  SysFS ID: /devices/pci0000:00/0000:00:01.0
>  SysFS BusID: 0000:00:01.0
>  Hardware Class: bridge
>  Model: "Intel Mobile 915GM/PM Express PCI Express Root Port"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2591 "Mobile 915GM/PM Express PCI Express Root Port"
>  Revision: 0x04
>  Driver: "pcieport-driver"
>  IRQ: 65 (no events)
>  Module Alias: "pci:v00008086d00002591sv00000000sd00000000bc06sc04i00"
>  Driver Info #0:
>    Driver Status: shpchp is active
>    Driver Activation Cmd: "modprobe shpchp"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>14: PCI 1b.0: 0403 Multimedia controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2668
>  Unique ID: u1Nb.2F_vwiiIYu2
>  SysFS ID: /devices/pci0000:00/0000:00:1b.0
>  SysFS BusID: 0000:00:1b.0
>  Hardware Class: sound
>  Model: "Fujitsu Siemens 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2668 "82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x04
>  Memory Range: 0xfebf8000-0xfebfbfff (rw,non-prefetchable)
>  IRQ: 10 (4637 events)
>  Module Alias: "pci:v00008086d00002668sv00001734sd0000107Cbc04sc03i00"
>  Driver Info #0:
>    Driver Status: snd_hda_intel is not active
>    Driver Activation Cmd: "modprobe snd_hda_intel"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>15: PCI 1c.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2660
>  Unique ID: z8Q3.CSfWaFw1K9E
>  SysFS ID: /devices/pci0000:00/0000:00:1c.0
>  SysFS BusID: 0000:00:1c.0
>  Hardware Class: bridge
>  Model: "Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2660 "82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1"
>  Revision: 0x04
>  Driver: "pcieport-driver"
>  IRQ: 73 (no events)
>  Module Alias: "pci:v00008086d00002660sv00000000sd00000000bc06sc04i00"
>  Driver Info #0:
>    Driver Status: shpchp is active
>    Driver Activation Cmd: "modprobe shpchp"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>16: PCI 1d.0: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2658
>  Unique ID: 1GTX.wUJFMnz+eJE
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0
>  SysFS BusID: 0000:00:1d.0
>  Hardware Class: usb controller
>  Model: "Fujitsu Siemens 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2658 "82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x04
>  Driver: "uhci_hcd"
>  I/O Ports: 0xe480-0xe49f (rw)
>  IRQ: 11 (no events)
>  Module Alias: "pci:v00008086d00002658sv00001734sd0000107Cbc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>17: PCI 1d.1: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2659
>  Unique ID: vayM.RvF+qL5jAiE
>  SysFS ID: /devices/pci0000:00/0000:00:1d.1
>  SysFS BusID: 0000:00:1d.1
>  Hardware Class: usb controller
>  Model: "Fujitsu Siemens 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2659 "82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x04
>  Driver: "uhci_hcd"
>  I/O Ports: 0xe800-0xe81f (rw)
>  IRQ: 3 (1 event)
>  Module Alias: "pci:v00008086d00002659sv00001734sd0000107Cbc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>18: PCI 1d.2: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_265a
>  Unique ID: mvRC.yJClJwCQi4F
>  SysFS ID: /devices/pci0000:00/0000:00:1d.2
>  SysFS BusID: 0000:00:1d.2
>  Hardware Class: usb controller
>  Model: "Fujitsu Siemens 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x265a "82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x04
>  Driver: "uhci_hcd"
>  I/O Ports: 0xe880-0xe89f (rw)
>  IRQ: 5 (3 events)
>  Module Alias: "pci:v00008086d0000265Asv00001734sd0000107Cbc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>19: PCI 1d.3: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_265b
>  Unique ID: eEx1.Tk8VoUK7ETF
>  SysFS ID: /devices/pci0000:00/0000:00:1d.3
>  SysFS BusID: 0000:00:1d.3
>  Hardware Class: usb controller
>  Model: "Fujitsu Siemens 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x265b "82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x04
>  Driver: "uhci_hcd"
>  I/O Ports: 0xec00-0xec1f (rw)
>  IRQ: 10 (4637 events)
>  Module Alias: "pci:v00008086d0000265Bsv00001734sd0000107Cbc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>20: PCI 1d.7: 0c03 USB Controller (EHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_265c
>  Unique ID: 5YuN.U9hQZ7xaHh4
>  SysFS ID: /devices/pci0000:00/0000:00:1d.7
>  SysFS BusID: 0000:00:1d.7
>  Hardware Class: usb controller
>  Model: "Fujitsu Siemens 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x265c "82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x04
>  Driver: "ehci_hcd"
>  Memory Range: 0xfebffc00-0xfebfffff (rw,non-prefetchable)
>  IRQ: 11 (no events)
>  Module Alias: "pci:v00008086d0000265Csv00001734sd0000107Cbc0Csc03i20"
>  Driver Info #0:
>    Driver Status: ehci-hcd is active
>    Driver Activation Cmd: "modprobe ehci-hcd"
>  Driver Info #1:
>    Driver Status: ehci_hcd is active
>    Driver Activation Cmd: "modprobe ehci_hcd"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>21: PCI 1e.0: 0604 PCI bridge (Subtractive decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2448
>  Unique ID: 6NW+.pbi2aV6ikBD
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0
>  SysFS BusID: 0000:00:1e.0
>  Hardware Class: bridge
>  Model: "Intel 82801 Mobile PCI Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2448 "82801 Mobile PCI Bridge"
>  Revision: 0xd4
>  Module Alias: "pci:v00008086d00002448sv00000000sd00000000bc06sc04i01"
>  Driver Info #0:
>    Driver Status: hw_random is not active
>    Driver Activation Cmd: "modprobe hw_random"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>22: PCI 1f.0: 0601 ISA bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_2641
>  Unique ID: BUZT.xdO6iXXzTWF
>  SysFS ID: /devices/pci0000:00/0000:00:1f.0
>  SysFS BusID: 0000:00:1f.0
>  Hardware Class: bridge
>  Model: "Fujitsu Siemens 82801FBM (ICH6M) LPC Interface Bridge"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x2641 "82801FBM (ICH6M) LPC Interface Bridge"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x04
>  Module Alias: "pci:v00008086d00002641sv00001734sd0000107Cbc06sc01i00"
>  Driver Info #0:
>    Driver Status: i8xx_tco is not active
>    Driver Activation Cmd: "modprobe i8xx_tco"
>  Driver Info #1:
>    Driver Status: tpm_nsc is not active
>    Driver Activation Cmd: "modprobe tpm_nsc"
>  Driver Info #2:
>    Driver Status: tpm_infineon is not active
>    Driver Activation Cmd: "modprobe tpm_infineon"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>23: PCI 1f.1: 0101 IDE interface
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_266f
>  Unique ID: 3p2J.kA2PyJwP2HD
>  SysFS ID: /devices/pci0000:00/0000:00:1f.1
>  SysFS BusID: 0000:00:1f.1
>  Hardware Class: storage
>  Model: "Fujitsu Siemens 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x266f "82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x04
>  Driver: "PIIX_IDE"
>  I/O Ports: 0xffa0-0xffaf (rw)
>  IRQ: 5 (3 events)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  IRQ: 14 (6744 events)
>  Module Alias: "pci:v00008086d0000266Fsv00001734sd0000107Cbc01sc01i8a"
>  Driver Info #0:
>    Driver Status: piix is active
>    Driver Activation Cmd: "modprobe piix"
>  Driver Info #1:
>    Driver Status: generic is active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>24: PCI 1f.3: 0c05 SMBus
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_266a
>  Unique ID: nS1_.ENB9Xb6pXS3
>  SysFS ID: /devices/pci0000:00/0000:00:1f.3
>  SysFS BusID: 0000:00:1f.3
>  Hardware Class: unknown
>  Model: "Fujitsu Siemens 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x266a "82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x04
>  Driver: "i801_smbus"
>  I/O Ports: 0x400-0x41f (rw)
>  IRQ: 10 (4637 events)
>  Module Alias: "pci:v00008086d0000266Asv00001734sd0000107Cbc0Csc05i00"
>  Driver Info #0:
>    Driver Status: i2c_i801 is active
>    Driver Activation Cmd: "modprobe i2c_i801"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>25: PCI 103.0: 0282 WLAN controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_8086_4220
>  Unique ID: kX1R.gy1ZasUC0k5
>  Parent ID: 6NW+.pbi2aV6ikBD
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:03.0
>  SysFS BusID: 0000:01:03.0
>  Hardware Class: network
>  Model: "Intel PRO/Wireless 2200BG"
>  Vendor: pci 0x8086 "Intel Corporation"
>  Device: pci 0x4220 "PRO/Wireless 2200BG"
>  SubVendor: pci 0x8086 "Intel Corporation"
>  SubDevice: pci 0x2702 
>  Revision: 0x05
>  Features: WLAN
>  Memory Range: 0xfa9fe000-0xfa9fefff (rw,non-prefetchable)
>  IRQ: 3 (1 event)
>  Requires: ipw-firmware
>  Module Alias: "pci:v00008086d00004220sv00008086sd00002702bc02sc80i00"
>  Driver Info #0:
>    Driver Status: ipw2200 is active
>    Driver Activation Cmd: "modprobe ipw2200"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #21 (PCI bridge)
>
>26: PCI 104.0: 0c00 FireWire (IEEE 1394) (OHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_104c_8023
>  Unique ID: pe4v.E6wZnRHgKjC
>  Parent ID: 6NW+.pbi2aV6ikBD
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:04.0
>  SysFS BusID: 0000:01:04.0
>  Hardware Class: firewire controller
>  Model: "Fujitsu Siemens TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)"
>  Vendor: pci 0x104c "Texas Instruments"
>  Device: pci 0x8023 "TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Driver: "ohci1394"
>  Memory Range: 0xfa9ff000-0xfa9ff7ff (rw,non-prefetchable)
>  Memory Range: 0xfa9f8000-0xfa9fbfff (rw,non-prefetchable)
>  IRQ: 5 (3 events)
>  Module Alias: "pci:v0000104Cd00008023sv00001734sd0000107Cbc0Csc00i10"
>  Driver Info #0:
>    Driver Status: ohci1394 is active
>    Driver Activation Cmd: "modprobe ohci1394"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #21 (PCI bridge)
>
>27: PCI 105.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10ec_8169
>  Unique ID: rBUF.JJtOj5L9gt5
>  Parent ID: 6NW+.pbi2aV6ikBD
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:05.0
>  SysFS BusID: 0000:01:05.0
>  Hardware Class: network
>  Model: "Fujitsu Siemens RTL-8169 Gigabit Ethernet"
>  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
>  Device: pci 0x8169 "RTL-8169 Gigabit Ethernet"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x10
>  Driver: "r8169"
>  Device File: eth0
>  I/O Ports: 0xc800-0xc8ff (rw)
>  Memory Range: 0xfa9ffc00-0xfa9ffcff (rw,non-prefetchable)
>  Memory Range: 0x20000000-0x2001ffff (ro,prefetchable,disabled)
>  IRQ: 3 (1 event)
>  HW Address: 00:03:0d:30:a6:fd
>  Link detected: no
>  Module Alias: "pci:v000010ECd00008169sv00001734sd0000107Cbc02sc00i00"
>  Driver Info #0:
>    Driver Status: r8169 is active
>    Driver Activation Cmd: "modprobe r8169"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #21 (PCI bridge)
>
>28: PCI 107.0: 0104 RAID bus controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3249
>  Unique ID: 2_DJ.oHdviblFtXF
>  Parent ID: 6NW+.pbi2aV6ikBD
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:07.0
>  SysFS BusID: 0000:01:07.0
>  Hardware Class: storage
>  Model: "Fujitsu Siemens VT6421 IDE RAID Controller"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3249 "VT6421 IDE RAID Controller"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0x50
>  Driver: "sata_via"
>  I/O Ports: 0x1420-0x142f (rw)
>  I/O Ports: 0x1430-0x143f (rw)
>  I/O Ports: 0x1440-0x144f (rw)
>  I/O Ports: 0x1450-0x145f (rw)
>  I/O Ports: 0x1400-0x141f (rw)
>  I/O Ports: 0x1000-0x1fff (rw)
>  IRQ: 10 (4637 events)
>  Module Alias: "pci:v00001106d00003249sv00001734sd0000107Cbc01sc04i00"
>  Driver Info #0:
>    Driver Status: sata_via is active
>    Driver Activation Cmd: "modprobe sata_via"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #21 (PCI bridge)
>
>29: PCI 300.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_c8
>  Unique ID: svHJ.kpnLS1k1Ig5
>  Parent ID: vSkL.qMNzks0IR_8
>  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:03:00.0
>  SysFS BusID: 0000:03:00.0
>  Hardware Class: graphics card
>  Model: "Fujitsu Siemens GeForce Go 6800"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x00c8 "GeForce Go 6800"
>  SubVendor: pci 0x1734 "Fujitsu Siemens Computer GmbH"
>  SubDevice: pci 0x107c 
>  Revision: 0xa2
>  Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable)
>  Memory Range: 0xc0000000-0xcfffffff (rw,prefetchable)
>  Memory Range: 0xfc000000-0xfcffffff (rw,non-prefetchable)
>  Memory Range: 0xfeae0000-0xfeafffff (ro,prefetchable,disabled)
>  IRQ: 10 (4637 events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Module Alias: "pci:v000010DEd000000C8sv00001734sd0000107Cbc03sc00i00"
>  Driver Info #0:
>    XFree86 v4 Server Module: nv
>    XF86Config Entry: Option "XaaNoPixmapCache" "on"\nOption "XaaNoOffScreenPixmaps" "on"
>  Driver Info #1:
>    XFree86 v4 Server Module: nvidia
>    3D Support: yes
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #13 (PCI bridge)
>
>30: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01_0
>  Unique ID: z9pp.gNN83gfynbD
>  SysFS ID: /devices/pnp0/00:00
>  SysFS BusID: 00:00
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c01 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>31: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
>  Unique ID: QL3u.ld94kxNGZf5
>  SysFS ID: /devices/pnp0/00:01
>  SysFS BusID: 00:01
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0200 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>32: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
>  Unique ID: tWJy.WYwRElrJa93
>  SysFS ID: /devices/pnp0/00:02
>  SysFS BusID: 00:02
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0b00 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>33: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0303
>  Unique ID: KiZ0.xhndlW9HXJ7
>  SysFS ID: /devices/pnp0/00:03
>  SysFS BusID: 00:03
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0303 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>34: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_SYN0802
>  Unique ID: ntp4.3yLzP2Xo6h7
>  SysFS ID: /devices/pnp0/00:04
>  SysFS BusID: 00:04
>  Hardware Class: unknown
>  Model: "Unclassified device"
>  SubVendor: SYN 
>  SubDevice: eisa 0x0802 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>35: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0800
>  Unique ID: E349.bvKf3UMzZfE
>  SysFS ID: /devices/pnp0/00:05
>  SysFS BusID: 00:05
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0800 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>36: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
>  Unique ID: hEKD.DE8RM9cWQQ8
>  SysFS ID: /devices/pnp0/00:06
>  SysFS BusID: 00:06
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c04 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>37: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_1
>  Unique ID: NhVi.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:07
>  SysFS BusID: 00:07
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>38: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_0
>  Unique ID: qslm.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:08
>  SysFS BusID: 00:08
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>39: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02
>  Unique ID: H20r.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:09
>  SysFS BusID: 00:09
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>40: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c14
>  Unique ID: iT2w.T6YKzQJWT82
>  SysFS ID: /devices/pnp0/00:0a
>  SysFS BusID: 00:0a
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c14 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>41: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01
>  Unique ID: 9fI_.gNN83gfynbD
>  SysFS ID: /devices/pnp0/00:0b
>  SysFS BusID: 00:0b
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c01 
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>42: IDE 00.0: 10602 CD-ROM (DVD-R)
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_K0056OC0352
>  Unique ID: Fffu.2GsbWiqD32E
>  Parent ID: 3p2J.kA2PyJwP2HD
>  SysFS ID: /block/hda
>  SysFS BusID: 0.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide0/0.0
>  Hardware Class: cdrom
>  Model: "HL-DT-ST DVD-RW GCA-4080N"
>  Vendor: "HL-DT-ST"
>  Device: "DVD-RW GCA-4080N"
>  Revision: "0W34"
>  Serial ID: "K0056OC0352"
>  Driver: "PIIX_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/disk/by-id/ata-HL-DT-ST_DVD-RW_GCA-4080N_K0056OC0352
>  Device Files: /dev/hda, /dev/disk/by-id/ata-HL-DT-ST_DVD-RW_GCA-4080N_K0056OC0352, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0, /dev/dvdrecorder, /dev/cdrom, /dev/dvd, /dev/cdrecorder
>  Device Number: block 3:0
>  Features: CD-R, CD-RW, DVD, DVD-R
>  Size: 0 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #23 (IDE interface)
>  Drive Speed: 24
>
>43: IDE 00.0: 10600 Disk
>  [Created at block.188]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_S082J10Y707746
>  Unique ID: z70z.5I8ryYTVpuE
>  Parent ID: 2_DJ.oHdviblFtXF
>  SysFS ID: /block/sda
>  SysFS BusID: 0:0:0:0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:01:07.0/host0/target0:0:0/0:0:0:0
>  Hardware Class: disk
>  Model: "SAMSUNG HM080JI"
>  Vendor: "SAMSUNG"
>  Device: "HM080JI"
>  Revision: "YC10"
>  Serial ID: "S082J10Y707746"
>  Driver: "sata_via", "sd"
>  Device File: /dev/disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746
>  Device Files: /dev/sda, /dev/disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746, /dev/disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0
>  Device Number: block 8:0-8:15
>  BIOS id: 0x80
>  Geometry (Logical): CHS 9729/255/63
>  Size: 156301488 sectors a 512 bytes
>  Geometry (BIOS EDD): CHS 9729/255/63
>  Size (BIOS EDD): 156301488 sectors
>  Geometry (BIOS Legacy): CHS 1024/255/63
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #28 (RAID bus controller)
>
>44: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_C4E49A63E49A580E
>  Unique ID: 1tKY.SE1wIdpsiiC
>  Parent ID: z70z.5I8ryYTVpuE
>  SysFS ID: /block/sda/sda1
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part1
>  Device Files: /dev/sda1, /dev/disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part1, /dev/disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part1, /dev/disk/by-uuid/C4E49A63E49A580E, /dev/disk/by-label/Local_hard_disc
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #43 (Disk)
>
>45: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_part2_size_2689666560
>  Unique ID: U2bc.SE1wIdpsiiC
>  Parent ID: z70z.5I8ryYTVpuE
>  SysFS ID: /block/sda/sda2
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part2
>  Device Files: /dev/sda2, /dev/disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part2, /dev/disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part2
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #43 (Disk)
>
>46: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_10fac02a_6a2c_4b62_b5c8_b3f2753d0537
>  Unique ID: xDrg.SE1wIdpsiiC
>  Parent ID: z70z.5I8ryYTVpuE
>  SysFS ID: /block/sda/sda3
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part3
>  Device Files: /dev/sda3, /dev/disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part3, /dev/disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part3, /dev/disk/by-uuid/10fac02a-6a2c-4b62-b5c8-b3f2753d0537
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #43 (Disk)
>
>47: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_b5898f8b_8264_42ec_8b14_a259ad041583
>  Unique ID: OP5l.SE1wIdpsiiC
>  Parent ID: z70z.5I8ryYTVpuE
>  SysFS ID: /block/sda/sda4
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part4
>  Device Files: /dev/sda4, /dev/disk/by-id/scsi-SATA_SAMSUNG_HM080JIS082J10Y707746-part4, /dev/disk/by-path/pci-0000:01:07.0-scsi-0:0:0:0-part4, /dev/disk/by-uuid/b5898f8b-8264-42ec-8b14-a259ad041583
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #43 (Disk)
>
>48: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0
>  Unique ID: k4bc.kHgW+dCdTY7
>  Parent ID: 1GTX.wUJFMnz+eJE
>  SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13.3-2-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13.3-2-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.0"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #16 (USB Controller)
>
>49: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0
>  Unique ID: pBe4.V0l5NO+KQqE
>  Parent ID: vayM.RvF+qL5jAiE
>  SysFS ID: /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0
>  SysFS BusID: 2-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13.3-2-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13.3-2-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.1"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #17 (USB Controller)
>
>50: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0
>  Unique ID: uIhY.Glpgk8o2N66
>  Parent ID: mvRC.yJClJwCQi4F
>  SysFS ID: /devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0
>  SysFS BusID: 3-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13.3-2-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13.3-2-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.2"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #18 (USB Controller)
>
>51: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0
>  Unique ID: zPk0.1UuF6vamJOD
>  Parent ID: eEx1.Tk8VoUK7ETF
>  SysFS ID: /devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0
>  SysFS BusID: 4-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13.3-2-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13.3-2-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.3"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #19 (USB Controller)
>
>52: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0
>  Unique ID: 2XnU.bSbYIvXTmJ5
>  Parent ID: 5YuN.U9hQZ7xaHh4
>  SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0
>  SysFS BusID: 5-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13.3-2-default ehci_hcd EHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13.3-2-default ehci_hcd"
>  Device: "EHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:1d.7"
>  Driver: "hub"
>  Speed: 480 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #20 (USB Controller)
>
>53: PS/2 00.0: 10800 Keyboard
>  [Created at input.137]
>  UDI: /org/freedesktop/Hal/devices/computer_i8042_Kbd_Port_logicaldev_input
>  Unique ID: EXC1.TBWTwSuMeW2
>  Hardware Class: keyboard
>  Model: "AT Translated Set 2 keyboard"
>  Vendor: int 0x0211 
>  Device: int 0x0001 "AT Translated Set 2 keyboard"
>  Device File: /dev/input/event1
>  Device Number: char 13:65
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>54: PS/2 00.0: 10500 PS/2 Mouse
>  [Created at input.157]
>  UDI: /org/freedesktop/Hal/devices/computer_i8042_Aux_1_Port_logicaldev_input
>  Unique ID: AH6Q.845qvaQafo3
>  Hardware Class: mouse
>  Model: "SynPS/2 Synaptics TouchPad"
>  Vendor: int 0x0212 
>  Device: int 0x0001 "SynPS/2 Synaptics TouchPad"
>  Compatible to: int 0x0210 0x0003
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2
>  Device Number: char 13:63 (char 13:32)
>  Driver Info #0:
>    Buttons: 3
>    Wheels: 0
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>55: None 00.0: 10103 CPU
>  [Created at cpu.290]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: Intel
>  Vendor: "GenuineIntel"
>  Model: 6.13.8 "Intel(R) Pentium(R) M processor 1.86GHz"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,tm,pbe,est,tm2
>  Clock: 800 MHz
>  Cache: 2048 kb
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>56: None 00.0: 10000 Monitor
>  [Created at fb.70]
>  Unique ID: rdCR.EY_qmtb9YY0
>  Hardware Class: monitor
>  Model: "Generic Monitor"
>  Vendor: "Generic"
>  Device: "Monitor"
>  Resolution: 1024x768@76Hz
>  Driver Info #0:
>    Max. Resolution: 1024x768
>    Vert. Sync Range: 50-90 Hz
>    Hor. Sync Range: 31-61 kHz
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>57: None 00.0: 10701 Ethernet
>  [Created at net.113]
>  UDI: /org/freedesktop/Hal/devices/net_00_03_0d_30_a6_fd
>  Unique ID: usDW.ndpeucax6V1
>  Parent ID: rBUF.JJtOj5L9gt5
>  SysFS ID: /class/net/eth0
>  SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:01:05.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "r8169"
>  Device File: eth0
>  HW Address: 00:03:0d:30:a6:fd
>  Link detected: no
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #27 (Ethernet controller)
>
>58: None 00.0: 10700 Loopback
>  [Created at net.113]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Link detected: yes
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>59: None 00.0: 10781 Network Interface
>  [Created at net.113]
>  Unique ID: wl2P.nfEXJulusj6
>  SysFS ID: /class/net/sit0
>  Hardware Class: network interface
>  Model: "Network Interface"
>  Device File: sit0
>  Config Status: cfg=new, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 130205: 55496 | 55497