Attachment 56305 Details for Bug 131971

The kernellog

kernellog (text/plain), 9.55 KB, created by Joerg Gerschuetz on 2005-11-03 06:02:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Joerg Gerschuetz

Created: 2005-11-03 06:02:37 UTC

Size: 9.55 KB

patch

obsolete

>Linux version 2.6.13.3-2-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Fri Oct 7 08:58:58 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ec400 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000007fe0000 (usable)
> BIOS-e820: 0000000007fe0000 - 0000000007fefc00 (ACPI data)
> BIOS-e820: 0000000007fefc00 - 0000000007ff0000 (ACPI NVS)
> BIOS-e820: 0000000007ff0000 - 0000000007ff1000 (reserved)
> BIOS-e820: 0000000007ff1000 - 0000000008000000 (usable)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>128MB LOWMEM available.
>On node 0 totalpages: 32768
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 28672 pages, LIFO batch:15
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 FUJ                                   ) @ 0x000f68d0
>ACPI: RSDT (v001 FUJ    CHIFFON  0x01090000 FUJ  0x00001000) @ 0x07fecb09
>ACPI: FADT (v001 FUJ    CHIFFON  0x01090000 FUJ  0x00001000) @ 0x07fefb8c
>ACPI: DSDT (v001 FUJ    CHIFFON  0x01090000 MSFT 0x01000007) @ 0x00000000
>ACPI: PM-Timer IO Port: 0xff08
>ACPI: local apic disabled
>Allocating PCI resources starting at 08000000 (gap: 08000000:f7f00000)
>Built 1 zonelists
>Kernel command line: BOOT_IMAGE=linux initrd=initrd splash=silent vga=0x314 lang=de
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 1024 (order: 10, 16384 bytes)
>Detected 398.325 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 118864k/131072k available (2035k kernel code, 11592k reserved, 697k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 797.35 BogoMIPS (lpj=1594708)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 128K
>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel Celeron (Coppermine) stepping 03
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 6990k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0800)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd9be, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:00:14.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Embedded Controller [EC] (gpe 44)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11)
>ACPI: Power Resource [USBP] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:00: ioport range 0xff00-0xff3f could not be reserved
>pnp: 00:00: ioport range 0xf800-0xf87f has been reserved
>PCI: Bus 1, cardbus bridge: 0000:00:13.0
>  IO window: 00002000-00002fff
>  IO window: 00003000-00003fff
>  PREFETCH window: 08000000-09ffffff
>  MEM window: 0a000000-0bffffff
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1130954596.852:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xfe800000, mapped to 0xc8880000, using 2560k, total 2560k
>vesafb: mode is 800x600x16, linelength=1600, pages=1
>vesafb: protected mode interface info at c000:6d9e
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 51518 bytes,<6>...found (800x600, 8809 bytes, v3).
>Console: switching to colour frame buffer device 99x34
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>PCI0 UAR1  LID 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>input: PS/2 Generic Mouse on isa0060/serio1
>Non-volatile memory driver v1.2
>NET: Registered protocol family 17
>SCSI subsystem initialized
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 11, io base 0x00001880
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor: USB       Model: FLASH DISK        Rev: 0423
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>SCSI device sda: 64000 512-byte hdwr sectors (33 MB)
>sda: Write Protect is off
>sda: Mode Sense: 0b 00 00 08
>sda: assuming drive cache: write through
>SCSI device sda: 64000 512-byte hdwr sectors (33 MB)
>sda: Write Protect is off
>sda: Mode Sense: 0b 00 00 08
>sda: assuming drive cache: write through
> sda: sda1
>Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>usb-storage: device scan complete
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:00:13.0 [10cf:10c6]
>Yenta: adjusting diagnostic: 41 -> 61
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:13.0, mfunc 0x01d11622, devctl 0x46
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000010
>cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff
>cs: IO port probe 0x100-0x3af: excluding 0x1f0-0x1f7 0x378-0x37f
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: memory probe 0xa0000000-0xa0ffffff: clean.
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [TZ1] (50 C)
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 0
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: FUJITSU MHK2060AT, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 11733120 sectors (6007 MB) w/512KiB Cache, CHS=12416/15/63, UDMA(33)
>hda: cache flushes not supported
> hda: hda1 hda2

Actions: View

Attachments on bug 131971: 56303 | 56304 | 56305 | 56306