Attachment 56326 Details for Bug 132104

dmesg after boot

x (text/plain), 17.48 KB, created by Richard Biener on 2005-11-03 09:39:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Richard Biener

Created: 2005-11-03 09:39:15 UTC

Size: 17.48 KB

patch

obsolete

>Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d8014 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
> BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fc0f0
>On node 0 totalpages: 262128
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32752 pages, LIFO batch:15
>DMI 2.3 present.
>ACPI: RSDP (v000 AMI                                   ) @ 0x000fa3a0
>ACPI: RSDT (v001 AMIINT INTEL865 0x00000010 MSFT 0x00000097) @ 0x3fff0000
>ACPI: FADT (v001 AMIINT INTEL865 0x00000011 MSFT 0x00000097) @ 0x3fff0030
>ACPI: MADT (v001 AMIINT INTEL865 0x00000009 MSFT 0x00000097) @ 0x3fff00c0
>ACPI: DSDT (v001  INTEL    I865G 0x00001000 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda2 vga=normal selinux=0 resume=/dev/sda1 splash=silent lapic
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 2800.565 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1033416k/1048512k available (2028k kernel code, 14156k reserved, 700k data, 204k init, 131008k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5605.90 BogoMIPS (lpj=11211802)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1759k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: b000-bfff
>  MEM window: ffc00000-ffcfffff
>  PREFETCH window: d7f00000-f7efffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: ffd00000-ffdfffff
>  PREFETCH window: 40000000-400fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1131009288.264:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 controller doesn't have KBD irq; using default 0x1
>PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS2 at I/O 0x3e8 (irq = 0) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>USB1 USB2 USB3 USB4 EHCI ICHB PS2M  MC9 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 204k freed
>SCSI subsystem initialized
>libata version 1.12 loaded.
>ata_piix version 1.04
>ata_piix: combined mode detected
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
>ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f
>ata1: dev 0 ATA, max UDMA/100, 321672960 sectors: lba48
>ata1: dev 1 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
>ata1: dev 1 ATAPI, max UDMA/33
>ata1: dev 0 configured for UDMA/33
>ata1: dev 1 configured for UDMA/33
>scsi0 : ata_piix
>  Vendor: ATA       Model: HDS722516VLSA80   Rev: V34O
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 321672960 512-byte hdwr sectors (164697 MB)
>SCSI device sda: drive cache: write back
> sda:<6>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
> sda1 sda2 sda3
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: PLEXTOR   Model: DVDR   PX-712A    Rev: 1.05
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0,  type 5
>ata2: disabling port
>scsi1 : ata_piix
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
>ACPI: CPU0 (power states: C1[C1])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>    ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x2
>udev[906]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[907]: run_program: exec of program '/sbin/udev.mount.sh' failed
>udev[908]: run_program: exec of program '/sbin/udev.mount.sh' failed
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>ReiserFS: sda2: using ordered data mode
>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda2: checking transaction log (sda2)
>ReiserFS: sda2: Using r5 hash to sort names
>ReiserFS: sda2: Removing [1132853 1133326 0x0 SD]..done
>ReiserFS: sda2: Removing [1132853 1133325 0x0 SD]..done
>ReiserFS: sda2: Removing [1132853 1133300 0x0 SD]..done
>ReiserFS: sda2: Removing [1132561 1133290 0x0 SD]..done
>ReiserFS: sda2: Removing [1132710 1133131 0x0 SD]..done
>ReiserFS: sda2: Removing [1132710 1133094 0x0 SD]..done
>ReiserFS: sda2: Removing [1132710 1133093 0x0 SD]..done
>ReiserFS: sda2: Removing [1132710 1133092 0x0 SD]..done
>ReiserFS: sda2: Removing [1131131 1131136 0x0 SD]..done
>ReiserFS: sda2: Removing [1131131 1131135 0x0 SD]..done
>ReiserFS: sda2: Removing [1131131 1131134 0x0 SD]..done
>ReiserFS: sda2: Removing [1131131 1131133 0x0 SD]..done
>ReiserFS: sda2: Removing [1131131 1131132 0x0 SD]..done
>ReiserFS: sda2: Removing [1130446 1131131 0x0 SD]..done
>ReiserFS: sda2: Removing [974343 1130446 0x0 SD]..done
>ReiserFS: sda2: Removing [1130211 1130439 0x0 SD]..done
>ReiserFS: sda2: Removing [974343 1130211 0x0 SD]..done
>ReiserFS: sda2: Removing [974304 1121863 0x0 SD]..done
>ReiserFS: sda2: Removing [949505 1121809 0x0 SD]..done
>ReiserFS: sda2: Removing [949505 1121407 0x0 SD]..done
>ReiserFS: sda2: Removing [949505 1121403 0x0 SD]..done
>ReiserFS: sda2: Removing [949505 1120830 0x0 SD]..done
>ReiserFS: sda2: Removing [949505 1120820 0x0 SD]..done
>ReiserFS: sda2: Removing [949505 1120816 0x0 SD]..done
>ReiserFS: sda2: Removing [949505 1120812 0x0 SD]..done
>ReiserFS: sda2: Removing [949505 1120810 0x0 SD]..done
>ReiserFS: sda2: Removing [949505 1120805 0x0 SD]..done
>ReiserFS: sda2: Removing [949505 1120799 0x0 SD]..done
>ReiserFS: sda2: Removing [949411 974343 0x0 SD]..done
>ReiserFS: sda2: Removing [769077 974304 0x0 SD]..done
>ReiserFS: sda2: Removing [769077 949505 0x0 SD]..done
>ReiserFS: sda2: Removing [949411 949412 0x0 SD]..done
>ReiserFS: sda2: Removing [769077 949411 0x0 SD]..done
>ReiserFS: sda2: Removing [854330 917239 0x0 SD]..done
>udev[926]: run_program: exec of program '/etc/hotplug.d/input_device/50-input_device.hotplug' failed
>ReiserFS: sda2: Removing [227321 854330 0x0 SD]..done
>ReiserFS: sda2: Removing [139 769077 0x0 SD]..done
>ReiserFS: sda2: Removing [949412 227321 0x0 SD]..done
>ReiserFS: sda2: Removing [50895 151917 0x0 SD]..done
>ReiserFS: sda2: There were 38 uncompleted unlinks/truncates. Completed
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>ReiserFS: sda3: found reiserfs format "3.6" with standard journal
>ReiserFS: sda3: using ordered data mode
>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda3: checking transaction log (sda3)
>ReiserFS: sda3: Using r5 hash to sort names
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 177
>eth0: RealTek RTL8139 at 0xf88acf00, 00:08:54:35:fe:d7, IRQ 177
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000e000
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Adding 819272k swap on /dev/sda1.  Priority:42 extents:1
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000e400
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000e800
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 185, io base 0x0000ec00
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>lp0: using parport0 (interrupt-driven).
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usbcore: registered new driver hiddev
>input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-1
>input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 865 Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>hw_random: RNG not detected
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 201, io mem 0xffeffc00
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>r8169 Gigabit Ethernet driver 2.2LK loaded
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 20 (level, low) -> IRQ 209
>eth1: Identified chip type is 'RTL8169s/8110s'.
>eth1: RTL8169 at 0xf88aae00, 00:11:09:8c:ab:db, IRQ 209
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0)
>tpm: module not supported by Novell, setting U taint flag.
>tpm_atmel: module not supported by Novell, setting U taint flag.
>NET: Registered protocol family 17
>usb 3-1: USB disconnect, address 2
>usb 3-1: new low speed USB device using uhci_hcd and address 3
>intel8x0_measure_ac97_clock: measured 55113 usecs
>intel8x0: clocking to 48000
>tpm_nsc: module not supported by Novell, setting U taint flag.
>tpm_infineon: module not supported by Novell, setting U taint flag.
>tpm_inf 0000:00:1f.0: LPC-bus found at 0x24d0
>tpm_inf: probe of 0000:00:1f.0 failed with error -5
>input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-1
>input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:1d.2-1
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>pcc_acpi: module not supported by Novell, setting U taint flag.
>p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist
>NFSD: starting 90-second grace period
>powernow: This module only works with AMD K7 CPUs

Actions: View

Attachments on bug 132104: 56324 | 56326 | 56341 | 56740