Attachment 56451 Details for Bug 132285

dmesg

dmesg.txt (text/plain), 27.08 KB, created by Heiko Schmidt on 2005-11-04 08:01:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Heiko Schmidt

Created: 2005-11-04 08:01:16 UTC

Size: 27.08 KB

patch

obsolete

>Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
> BIOS-e820: 000000003fee0000 - 000000003feea000 (ACPI data)
> BIOS-e820: 000000003feea000 - 000000003ff00000 (ACPI NVS)
> BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>126MB HIGHMEM available.
>896MB LOWMEM available.
>On node 0 totalpages: 261856
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32480 pages, LIFO batch:15
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6bd0
>ACPI: RSDT (v001 PTLTD  Wistron  0x06040000  LTP 0x00000000) @ 0x3fee39c9
>ACPI: FADT (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x3fee9e88
>ACPI: MADT (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x3fee9efc
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x3fee9fd8
>ACPI: MCFG (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x3fee9f9c
>ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20030224) @ 0x3fee48c1
>ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20030224) @ 0x3fee422f
>ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x3fee3dea
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x3fee3c0c
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030224) @ 0x3fee3a11
>ACPI: DSDT (v001 INTEL  ALVISO   0x06040000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: local apic disabled
>Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda9 vga=0x314 selinux=0    resume=/dev/sda6  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 1729.577 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032336k/1047424k available (2028k kernel code, 14124k reserved, 700k data, 204k init, 129920k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3463.49 BogoMIPS (lpj=6926989)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1731k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0c00)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd78e, last bus=8
>PCI: Using MMCONFIG
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>    ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
>    ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
>    ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
>    ACPI-0251: *** Warning: Handle is NULL and Pathname is relative
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *10 11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
>ACPI: Embedded Controller [EC0] (gpe 23)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: c0100000-c01fffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 3000-3fff
>  MEM window: c4000000-c7ffffff
>  PREFETCH window: d8000000-dbffffff
>PCI: Bus 7, cardbus bridge: 0000:06:09.0
>  IO window: 00005000-00005fff
>  IO window: 00006000-00006fff
>  PREFETCH window: 40000000-41ffffff
>  MEM window: 46000000-47ffffff
>PCI: Bus 11, cardbus bridge: 0000:06:09.1
>  IO window: 00007000-00007fff
>  IO window: 00008000-00008fff
>  PREFETCH window: 42000000-43ffffff
>  MEM window: 48000000-49ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-4fff
>  MEM window: c8000000-c80fffff
>  PREFETCH window: 40000000-44ffffff
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:06:09.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:06:09.1[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1130971381.280:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>Allocate Port Service[pcie03]
>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 16384k
>vesafb: mode is 800x600x16, linelength=1600, pages=16
>vesafb: protected mode interface info at c000:ae4a
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 51518 bytes,<6>...found (800x600, 8809 bytes, v3).
>Console: switching to colour frame buffer device 99x34
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 controller has invalid data port 0x0; using default 0x60
>PNP: PS/2 controller has invalid command port 0x0; using default 0x64
>PNP: PS/2 controller doesn't have KBD irq; using default 0x1
>PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>LID0 SLPB AZAL RP01 RP02 RP03 RP04 LANB MODM 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>SCSI subsystem initialized
>input: AT Translated Set 2 keyboard on isa0060/serio0
>libata version 1.12 loaded.
>ahci version 1.01
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ahci: probe of 0000:00:1f.2 failed with error -12
>ata_piix version 1.04
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18A0 irq 14
>ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6023 85:3c69 86:3d01 87:6003 88:203f
>ata1: dev 0 ATA, max UDMA/100, 195371568 sectors: lba48
>ata1(0): applying bridge limits
>ata1: dev 0 configured for UDMA/100
>scsi0 : ata_piix
>  Vendor: ATA       Model: SAMSUNG HM100JC   Rev: YN10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>SCSI device sda: drive cache: write back
> sda:<6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x280b1, caps: 0xb04713/0x60040d
>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
> sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sda3
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18A8 irq 15
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
>ata2: dev 0 ATAPI, max UDMA/33
>ata2(0): applying bridge limits
>ata2: dev 0 configured for UDMA/33
>scsi1 : ata_piix
>  Vendor: MATSHITA  Model: DVD-RAM UJ-841S   Rev: 1.00
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>    ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x1
>sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>ACPI: Thermal Zone [TZS0] (42 C)
>ACPI: Thermal Zone [TZS1] (26 C)
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: sda9: found reiserfs format "3.6" with standard journal
>ReiserFS: sda9: using ordered data mode
>ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda9: checking transaction log (sda9)
>ReiserFS: sda9: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>bootsplash: status on console 0 changed to on
>Adding 1052216k swap on /dev/sda6.  Priority:-1 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>ReiserFS: sda7: using ordered data mode
>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda7: checking transaction log (sda7)
>ReiserFS: sda7: Using r5 hash to sort names
>ReiserFS: sda8: found reiserfs format "3.6" with standard journal
>ReiserFS: sda8: using ordered data mode
>ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda8: checking transaction log (sda8)
>ReiserFS: sda8: Using r5 hash to sort names
>NTFS driver 2.1.23 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>NTFS volume version 3.1.
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (8183 buckets, 65464 max) - 248 bytes per conntrack
>pnp: Device 00:06 activated.
>parport: PnPBIOS parport detected.
>pnp: Device 00:06 disabled.
>lp: driver loaded but no devices found
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001860
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hw_random hardware driver 1.0.0 loaded
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: module not supported by Novell, setting U taint flag.
>ieee80211: 802.11 data/management/control stack, 1.0.3
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>ipw2200: module not supported by Novell, setting U taint flag.
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>ieee1394: Initialized config rom entry `ip1394'
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0004000
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 2-2: device descriptor read/all, error -71
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>r8169 Gigabit Ethernet driver 2.2LK loaded
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:06:07.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>eth0: Identified chip type is 'RTL8169s/8110s'.
>eth0: RTL8169 at 0xf9088000, 00:0a:e4:af:2d:1f, IRQ 11
>ACPI: PCI Interrupt 0000:06:09.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:06:09.0 [17c0:3007]
>ACPI: PCI Interrupt 0000:06:05.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>Yenta: ISA IRQ mask 0x00f8, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
>cs: IO port probe 0x4000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xc80fffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x44ffffff
>ACPI: PCI Interrupt 0000:06:09.1[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:06:09.1 [17c0:3007]
>Yenta: ISA IRQ mask 0x00f8, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
>cs: IO port probe 0x4000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xc80fffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x44ffffff
>usb 1-2: USB disconnect, address 2
>ipw2200: ipw-2.3-boot.fw load failed: Reason -2
>ipw2200: Unable to load firmware: 0xFFFFFFFE
>ipw2200: failed to register network device
>ACPI: PCI interrupt for device 0000:06:05.0 disabled
>ipw2200: probe of 0000:06:05.0 failed with error -5
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:06:09.2[C] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[c8007800-c8007fff]  Max Packet=[2048]
>usb 5-8: new high speed USB device using ehci_hcd and address 6
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[05e40a0031271041]
>Initializing USB Mass Storage driver...
>usb 1-2: new low speed USB device using uhci_hcd and address 3
>cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
>cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
>cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>Bluetooth: Core ver 2.7
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.8
>usb 2-2: new low speed USB device using uhci_hcd and address 4
>usbcore: registered new driver hci_usb
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usbcore: registered new driver hiddev
>input: USB HID v1.10 Mouse [Darfon USB Optical Mouse] on usb-0000:00:1d.0-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>lirc_dev: module not supported by Novell, setting U taint flag.
>lirc_dev: IR Remote Control driver registered, at major 60 
>lirc_atiusb: module not supported by Novell, setting U taint flag.
>
>lirc_atiusb: USB remote driver for LIRC v0.4
>lirc_atiusb: Paul Miller <pmiller9@users.sourceforge.net>
>lirc_dev: lirc_register_plugin: sample_rate: 0
>lirc_atiusb[4]: X10 WTI RF receiver on usb2:4
>usbcore: registered new driver lirc_atiusb
>usbcore: registered new driver ati_remote
>drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
>bootsplash: status on console 0 changed to on
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>r8169: eth0: link down
>  Vendor: SAMSUNG   Model: MP0402H           Rev: 0811
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>SCSI device sdb: 78242976 512-byte hdwr sectors (40060 MB)
>sdb: assuming drive cache: write through
>SCSI device sdb: 78242976 512-byte hdwr sectors (40060 MB)
>sdb: assuming drive cache: write through
> sdb: sdb1
>Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
>Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0,  type 0
>usb-storage: device scan complete
>eth0: PHY reset until link up
>eth0: no IPv6 routers present
>eth0: PHY reset until link up
>ACPI: AC Adapter [ADP1] (on-line)
>hda_codec: num_steps = 0 for NID=0x8
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID0]
>ACPI: Sleep Button (CM) [SLPB]
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>bootsplash: status on console 0 changed to on
>subfs 0.9
>bootsplash: status on console 0 changed to on
>NTFS volume version 3.1.
>NTFS-fs warning (device sdb1): load_system_files(): Volume is dirty.  Will not be able to remount read-write.  Run chkdsk and mount in Windows.
>eth0: PHY reset until link up
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>hda_codec: num_steps = 0 for NID=0xb
>hda_codec: num_steps = 0 for NID=0xb
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>Linux video capture interface: v1.00
>saa7130/34: v4l2 driver version 0.2.14 loaded
>PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
>saa7134[0]: found at 0000:07:00.0, rev: 1, irq: 11, latency: 0, mmio: 0x46000000
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
>saa7134[0]: board init: gpio is 0
>saa7134[0]: i2c eeprom 00: be 16 03 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
>saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
>saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 1f 02 51 96 2b
>saa7134[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
>saa7134[0] Board has DVB-T
>saa7134[0] Tuner type is 63
>saa7134[0]: registered device video0 [v4l2]
>saa7134[0]: registered device vbi0
>saa7134[0]: registered device radio0
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up
>eth0: PHY reset until link up

Actions: View

Attachments on bug 132285: 56449 | 56450 | 56451 | 56528