Attachment 56804 Details for Bug 105984

dmesg

dmesg (text/plain), 17.12 KB, created by Forgotten User N1m2whZ-xl on 2005-11-09 16:55:20 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Forgotten User N1m2whZ-xl

Created: 2005-11-09 16:55:20 UTC

Size: 17.12 KB

patch

obsolete

>==================================================
>Mon Oct 24 23:10:53 CEST 2005
>==================================================
>Bootdata ok (command line is auto BOOT_IMAGE=suse100 ro root=303 resume=/dev/hda8 selinux=0 console=tty0 no_timer_check showopts irqpoll)
>Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff40000 (usable)
> BIOS-e820: 000000003ff40000 - 000000003ff50000 (ACPI data)
> BIOS-e820: 000000003ff50000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 MSI                                   ) @ 0x00000000000f83a0
>ACPI: RSDT (v001 MSI    1029     0x06242005 MSFT 0x00000097) @ 0x000000003ff40000
>ACPI: FADT (v002 MSI    1029     0x06242005 MSFT 0x00000097) @ 0x000000003ff40200
>ACPI: MADT (v001 MSI    OEMAPIC  0x06242005 MSFT 0x00000097) @ 0x000000003ff40300
>ACPI: WDRT (v001 MSI    MSI_OEM  0x06242005 MSFT 0x00000097) @ 0x000000003ff40360
>ACPI: MCFG (v001 MSI    OEMMCFG  0x06242005 MSFT 0x00000097) @ 0x000000003ff403b0
>ACPI: SSDT (v001 OEM_ID OEMTBLID 0x00000001 INTL 0x02002026) @ 0x000000003ff434c0
>ACPI: OEMB (v001 MSI    MSI_OEM  0x06242005 MSFT 0x00000097) @ 0x000000003ff50040
>ACPI: DSDT (v001    MSI     1029 0x06242005 INTL 0x02002026) @ 0x0000000000000000
>No mptable found.
>On node 0 totalpages: 261855
>  DMA zone: 3999 pages, LIFO batch:1
>  Normal zone: 257856 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>ATI board detected. Disabling timer pin 1.
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
>Checking aperture...
>CPU 0: aperture @ 643e000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>Built 1 zonelists
>Kernel command line: auto BOOT_IMAGE=suse100 ro root=303 resume=/dev/hda8 selinux=0 console=tty0 no_timer_check showopts irqpoll
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 1790.865 MHz processor.
>time.c: Using PIT/TSC based timekeeping.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Memory: 1024956k/1047808k available (2290k kernel code, 22340k reserved, 825k data, 176k init)
>Calibrating delay using timer specific routine.. 3590.32 BogoMIPS (lpj=7180640)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>mtrr: v2.0 (20020519)
>CPU: AMD Turion(tm) 64 Mobile Technology MT-32 stepping 02
>checking if image is initramfs... it is
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
> failed.
>timer doesn't work through the IO-APIC - disabling NMI Watchdog!
>Uhhuh. NMI received for unknown reason 3d.
>Dazed and confused, but trying to continue
>Do you have a strange power saving mode enabled?
> works.
>Using local APIC timer interrupts.
>Detected 12.436 MHz APIC timer.
>testing NMI watchdog ... CPU#0: NMI appears to be stuck (1->1)!
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Embedded Controller [EC] (gpe 6)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP2._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 5 6 7 10 11 12 14 15) *0, disabled.
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>PCI: Bridge: 0000:00:02.0
>  IO window: d000-dfff
>  MEM window: fbe00000-fbefffff
>  PREFETCH window: f0000000-faffffff
>PCI: Bus 3, cardbus bridge: 0000:02:04.0
>  IO window: 00001000-00001fff
>  IO window: 00002000-00002fff
>  PREFETCH window: 40000000-41ffffff
>  MEM window: 46000000-47ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:04.1
>  IO window: 00003000-00003fff
>  IO window: 00005000-00005fff
>  PREFETCH window: 42000000-43ffffff
>  MEM window: 48000000-49ffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: e000-efff
>  MEM window: fbf00000-fbffffff
>  PREFETCH window: 40000000-44ffffff
>PCI: 0000:00:02.0 has unsupported PM cap regs version (3)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 177
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 20 (level, low) -> IRQ 185
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1130195352.724:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>PCI: 0000:00:02.0 has unsupported PM cap regs version (3)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>pcie_portdrv_probe->Dev[5a34:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Real Time Clock Driver v1.12
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 209
>ACPI: PCI interrupt for device 0000:00:14.6 disabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>POP2  RTL AC97 MC97 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 176k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 217
>ATIIXP: chipset revision 0
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: SAMSUNG MP0804H, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 1024KiB
>hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>Probing IDE interface ide1...
>input: AT Translated Set 2 keyboard on isa0060/serio0
>hdc: PIONEER DVD-RW DVR-K15, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>logips2pp: Detected unknown logitech mouse model 99
>    ACPI-0210: *** Warning: duty_cycle spans bit 4
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Thermal Zone [THRM] (62 C)
>hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio2
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>logips2pp: Detected unknown logitech mouse model 99
>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio2
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>NTFS driver 2.1.23 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>lp: driver loaded but no devices found
>Adding 1469908k swap on /dev/hda8.  Priority:42 extents:1
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 177
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:13.2: irq 177, io mem 0xfbdff000
>ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>irq 177: nobody cared (try booting with the "irqpoll" option)
>
>Call Trace: <IRQ> <ffffffff80158025>{__report_bad_irq+53} <ffffffff80158237>{note_interrupt+439}
>       <ffffffff80157b9f>{__do_IRQ+207} <ffffffff801113d8>{do_IRQ+72}
>       <ffffffff8010eebc>{ret_from_intr+0}  <EOI> <ffffffff80223922>{copy_user_generic_c+8}
>       <ffffffff80158ff0>{file_read_actor+176} <ffffffff8015a32a>{do_generic_mapping_read+362}
>       <ffffffff80158f40>{file_read_actor+0} <ffffffff8015acf0>{__generic_file_aio_read+384}
>       <ffffffff8015af42>{generic_file_aio_read+50} <ffffffff80179270>{do_sync_read+208}
>       <ffffffff8016c42f>{__do_mmap_pgoff+1663} <ffffffff80147990>{autoremove_wake_function+0}
>       <ffffffff80179715>{vfs_read+229} <ffffffff80179ef3>{sys_read+83}
>       <ffffffff8010e91a>{system_call+126} 
>handlers:
>[<ffffffff88113b20>] (usb_hcd_irq+0x0/0x70 [usbcore])
>Disabling IRQ #177
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 177
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.0: irq 177, io mem 0xfbdfd000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 177
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.1: irq 177, io mem 0xfbdfe000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>8139too Fast Ethernet driver 0.9.27
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 225
>eth0: RealTek RTL8139 at 0xffffc20000106c00, 00:0c:76:f6:d8:3c, IRQ 225
>eth0:  Identified 8139 chip type 'RTL-8101'
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 19 (level, low) -> IRQ 177
>Yenta: CardBus bridge found at 0000:02:04.0 [1462:0291]
>ieee1394: Initialized config rom entry `ip1394'
>Yenta: ISA IRQ mask 0x04b8, PCI irq 177
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
>pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x44ffffff
>ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 20 (level, low) -> IRQ 185
>Yenta: CardBus bridge found at 0000:02:04.1 [1462:0291]
>usb 3-1: new low speed USB device using ohci_hcd and address 2
>Yenta: ISA IRQ mask 0x04b8, PCI irq 185
>Socket status: 30000820
>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
>pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x44ffffff
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:02:04.2[C] -> GSI 21 (level, low) -> IRQ 169
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[169]  MMIO=[fbfff000-fbfff7ff]  Max Packet=[2048]
>usb 3-3: new full speed USB device using ohci_hcd and address 3
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0010dc00007e3b89]
>usbcore: registered new driver hiddev
>Bluetooth: Core ver 2.7
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.8
>input: USB HID v1.10 Mouse [062a:0000] on usb-0000:00:13.1-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>usbcore: registered new driver hci_usb
>ath_hal: module license 'Proprietary' taints kernel.
>ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
>wlan: 0.8.6.0 (EXPERIMENTAL)
>ath_rate_sample: module not supported by Novell, setting U taint flag.
>ath_rate_sample: no version for "ether_sprintf" found: kernel tainted.
>ath_rate_sample: 1.2
>ath_pci: 0.9.6.0 (EXPERIMENTAL)
>PCI: Enabling device 0000:07:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 20 (level, low) -> IRQ 185
>Build date: Sep 13 2005
>Debugging version (IEEE80211)
>ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>ath0: H/W encryption support: WEP AES AES_CCM TKIP
>ath0: mac 5.6 phy 4.1 radio 3.6
>ath0: Use hw queue 1 for WME_AC_BE traffic
>ath0: Use hw queue 0 for WME_AC_BK traffic
>ath0: Use hw queue 2 for WME_AC_VI traffic
>ath0: Use hw queue 3 for WME_AC_VO traffic
>ath0: Use hw queue 8 for CAB traffic
>ath0: Use hw queue 9 for beacons
>Debugging version (ATH)
>ath0: Atheros 5212: mem=0x48000000, irq=185
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Bluetooth: L2CAP ver 2.7
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>NET: Registered protocol family 17
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff803cf000(lo)
>IPv6 over IPv4 tunneling driver
>ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 209
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID0]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Power Button (CM) [PWRB]
>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3)
>    ACPI-0071: *** Warning: Invalid 'package' argument
>    ACPI-0285: *** Warning: Invalid _PSS data
>powernow-k8:    0 : fid 0x0 (800 MHz), vid 0x13 (1075 mV)
>powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0xc (1250 mV)
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa (1300 mV)
>cpu_init done, current fid 0xa, vid 0x8
>powernow-k8: ph2 null fid transition 0xa
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist
>NFSD: starting 90-second grace period
>ath0: no IPv6 routers present
>[drm] Initialized drm 1.0.0 20040925
>APIC error on CPU0: 00(40)
>Loading modules under 2.6.13-15-default at Mon Oct 24 23:10:53 CEST 2005

Actions: View

Attachments on bug 105984: 56803 | 56804