Attachment 57267 Details for Bug 132460

dmesg with acpi=off in boot parameters

dmesg.acpi_off (text/plain), 13.06 KB, created by Gianluigi Pulcio on 2005-11-14 15:01:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gianluigi Pulcio

Created: 2005-11-14 15:01:52 UTC

Size: 13.06 KB

patch

obsolete

>Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001bfd0000 (usable)
> BIOS-e820: 000000001bfd0000 - 000000001bfdf000 (ACPI data)
> BIOS-e820: 000000001bfdf000 - 000000001c000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>447MB LOWMEM available.
>found SMP MP-table at 000ff780
>On node 0 totalpages: 114640
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 110544 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: UNIWILL  Product ID: 255KIx       APIC at: 0xFEE00000
>Processor #0 15:12 APIC version 16
>I/O APIC #1 Version 2 at 0xFEC00000.
>Processors: 1
>Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3f80000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda2 vga=0x31d selinux=0 acpi=off resume=/dev/hda1 splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 798.337 MHz processor.
>Using tsc for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 448848k/458560k available (2028k kernel code, 9132k reserved, 700k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1598.53 BogoMIPS (lpj=3197072)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001
>CPU: After vendor identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 128K (64 bytes/line)
>CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000010 00000001 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: AMD Mobile AMD Sempron(tm) Processor 3300+ stepping 02
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1765k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>Uncovering SIS963 that hid as a SIS503 (compatible=0)
>Enabling SiS 96x SMBus.
>Boot video device is 0000:01:00.0
>PCI: Using IRQ router SIS [1039/0963] at 0000:00:02.0
>PCI: IRQ 0 for device 0000:00:02.1 doesn't match PIRQ mask - try pci=usepirqmask
>PCI: Found IRQ 5 for device 0000:00:02.1
>PCI: Sharing IRQ 5 with 0000:00:09.0
>PCI: Sharing IRQ 5 with 0000:00:09.1
>PCI: Sharing IRQ 5 with 0000:00:09.2
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: dfe00000-dfefffff
>  PREFETCH window: cfd00000-dfcfffff
>PCI: Bus 2, cardbus bridge: 0000:00:09.0
>  IO window: 00001000-00001fff
>  IO window: 00002000-00002fff
>  PREFETCH window: 1c000000-1dffffff
>  MEM window: 1e000000-1fffffff
>PCI: Bus 6, cardbus bridge: 0000:00:09.1
>  IO window: 00003000-00003fff
>  IO window: 00004000-00004fff
>  PREFETCH window: 20000000-21ffffff
>  MEM window: 22000000-23ffffff
>PCI: Found IRQ 5 for device 0000:00:09.0
>PCI: Sharing IRQ 5 with 0000:00:02.1
>PCI: Sharing IRQ 5 with 0000:00:09.1
>PCI: Sharing IRQ 5 with 0000:00:09.2
>PCI: Found IRQ 5 for device 0000:00:09.1
>PCI: Sharing IRQ 5 with 0000:00:02.1
>PCI: Sharing IRQ 5 with 0000:00:09.0
>PCI: Sharing IRQ 5 with 0000:00:09.2
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>audit: initializing netlink socket (disabled)
>audit(1131952722.328:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xd0000000, mapped to 0xdc880000, using 7680k, total 16384k
>vesafb: mode is 1280x768x16, linelength=2560, pages=3
>vesafb: protected mode interface info at cbe6:0008
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 132651 bytes,<6>...found (1280x768, 16355 bytes, v3).
>Console: switching to colour frame buffer device 158x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: Detected active multiplexing controller, rev 1.0.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PCI: Found IRQ 10 for device 0000:00:02.6
>PCI: Sharing IRQ 10 with 0000:00:02.7
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SIS5513: IDE controller at PCI slot 0000:00:02.5
>SIS5513: chipset revision 0
>SIS5513: not 100% native mode: will probe irqs later
>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: SAMSUNG MP0603H, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 1024KiB
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
>input: SynPS/2 Synaptics TouchPad on isa0060/serio2
>hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 < hda5 hda6 >
>Probing IDE interface ide1...
>hdc: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
>hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
>ide: failed opcode was: unknown
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
>ReiserFS: hda2: using ordered data mode
>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda2: checking transaction log (hda2)
>ReiserFS: hda2: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 971892k swap on /dev/hda1.  Priority:-1 extents:1
>bootsplash: status on console 0 changed to on
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>ReiserFS: hda6: found reiserfs format "3.6" with standard journal
>ReiserFS: hda6: using ordered data mode
>ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda6: checking transaction log (hda6)
>ReiserFS: hda6: Using r5 hash to sort names
>lp: driver loaded but no devices found
>PCI: Found IRQ 10 for device 0000:00:02.7
>PCI: Sharing IRQ 10 with 0000:00:02.6
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 32M @ 0xe0000000
>i2c-sis96x version 1.0.0
>sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>sis900.c: v1.08.08 Jan. 22 2005
>ieee1394: Initialized config rom entry `ip1394'
>intel8x0_measure_ac97_clock: measured 55449 usecs
>intel8x0: clocking to 48000
>PCI: Found IRQ 4 for device 0000:00:03.0
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:03.0: irq 4, io mem 0xdfffd000
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>    ACPI-0768: *** Warning: Thread 919 could not acquire Mutex [<NULL>] AE_BAD_PARAMETER
>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>PCI: Found IRQ 3 for device 0000:00:03.1
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.1: irq 3, io mem 0xdfffe000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>PCI: Found IRQ 5 for device 0000:00:03.3
>ehci_hcd 0000:00:03.3: EHCI Host Controller
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:03.3: irq 5, io mem 0xdffff000
>PCI: cache line size of 64 is not supported by device 0000:00:03.3
>ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>PCI: Found IRQ 5 for device 0000:00:06.0
>PCI: Sharing IRQ 5 with 0000:00:04.0
>PCI: Sharing IRQ 5 with 0000:00:0b.0
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[dfffb800-dfffbfff]  Max Packet=[2048]
>PCI: Found IRQ 5 for device 0000:00:04.0
>PCI: Sharing IRQ 5 with 0000:00:06.0
>PCI: Sharing IRQ 5 with 0000:00:0b.0
>0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
>0000:00:04.0: Using transceiver found at address 1 as default
>eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 5, 00:03:0d:2e:6b:68.
>PCI: Found IRQ 5 for device 0000:00:09.0
>PCI: Sharing IRQ 5 with 0000:00:02.1
>PCI: Sharing IRQ 5 with 0000:00:09.1
>PCI: Sharing IRQ 5 with 0000:00:09.2
>Yenta: CardBus bridge found at 0000:00:09.0 [1734:106c]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x0a80, PCI irq 5
>Socket status: 30000006
>PCI: Found IRQ 5 for device 0000:00:09.1
>PCI: Sharing IRQ 5 with 0000:00:02.1
>PCI: Sharing IRQ 5 with 0000:00:09.0
>PCI: Sharing IRQ 5 with 0000:00:09.2
>Yenta: CardBus bridge found at 0000:00:09.1 [1734:106c]
>Yenta: ISA IRQ mask 0x0a80, PCI irq 5
>Socket status: 30000006
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d53255ce12d]
>bootsplash: status on console 0 changed to on
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: excluding 0x820-0x837 0x840-0x84f 0x858-0x89f
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: excluding 0x820-0x837 0x840-0x84f 0x858-0x89f
>cs: IO port probe 0xa00-0xaff: clean.
>NET: Registered protocol family 17
>eth0: Media Link On 100mbps full-duplex 
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 not a capable Intel processor
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>mtrr: 0xd0000000,0x4000000 overlaps existing 0xd0000000,0x1000000
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>bootsplash: status on console 0 changed to on
>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3)
>powernow-k8: BIOS error: maxvid exceeded with pstate 0
>powernow: This module only works with AMD K7 CPUs
>bootsplash: status on console 0 changed to on
>eth0: no IPv6 routers present
>spurious 8259A interrupt: IRQ7.
>SCSI subsystem initialized
>st: Version 20050501, fixed bufsize 32768, s/g segs 256
>lp: driver loaded but no devices found
>lp: driver loaded but no devices found
>lp: driver loaded but no devices found

Actions: View

Attachments on bug 132460: 57267 | 57269 | 57270 | 57271 | 57804