Attachment 57288 Details for Bug 132500

hardware info text file

hwinfo.txt (text/plain), 222.58 KB, created by jonah naylor on 2005-11-14 17:30:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: jonah naylor

Created: 2005-11-14 17:30:21 UTC

Size: 222.58 KB

patch

obsolete

>============ start debug info ============
>libhd version 11.25 (ia32)
>kernel version is 2.6
>----- /proc/cmdline -----
>  root=/dev/hda2 vga=0x317 selinux=0 resume=/dev/hda1 splash=silent
>----- /proc/cmdline end -----
>debug = 0xff7ffff7
>probe = 0x00138fc4aa17fffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -max -lxrc)
>shm: attached segment 884740 at 0x40579000
>>> hal.1: read hal data
>  hal: connected to: :1.61
>----- hal device list -----
>  0: udi = '/org/freedesktop/Hal/devices/usb_device_7ab_fccd_FW436_0B29140042F9AA27_if0_scsi_host'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_7ab_fccd_FW436_0B29140042F9AA27_if0_scsi_host'
>  linux.subsystem = 'scsi_host'
>  linux.hotplug_type = 2 (0x2)
>  scsi_host.host = 13 (0xd)
>  info.product = 'SCSI Host Adapter'
>  info.capabilities = { 'scsi_host' }
>  info.category = 'scsi_host'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_7ab_fccd_FW436_0B29140042F9AA27_if0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0/host13'
>  linux.sysfs_path = '/sys/class/scsi_host/host13'
>
>  1: udi = '/org/freedesktop/Hal/devices/usb_device_7ab_fccd_FW436_0B29140042F9AA27_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_7ab_fccd_FW436_0B29140042F9AA27_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Mass Storage Interface'
>  usb.interface.protocol = 80 (0x50)
>  usb.interface.subclass = 6 (0x6)
>  usb.interface.class = 8 (0x8)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'usb-storage'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1963 (0x7ab)
>  usb.product_id = 64717 (0xfccd)
>  usb.vendor = 'Freecom Technologies'
>  usb.product = 'USB Mass Storage Interface'
>  usb.device_revision_bcd = 1078 (0x436)
>  usb.max_power = 10 (0xa)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 29 (0x1d)
>  usb.serial = 'FW436_0B29140042F9AA27'
>  usb.speed_bcd = 294912 (0x48000)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = false
>  usb.can_wake_up = false
>  usb.bus_number = 5 (0x5)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_7ab_fccd_FW436_0B29140042F9AA27'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0'
>
>  2: udi = '/org/freedesktop/Hal/devices/usb_device_7ab_fccd_FW436_0B29140042F9AA27'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_7ab_fccd_FW436_0B29140042F9AA27'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 5 (0x5)
>  usb_device.can_wake_up = false
>  usb_device.is_self_powered = false
>  usb_device.version_bcd = 512 (0x200)
>  usb_device.speed_bcd = 294912 (0x48000)
>  usb_device.serial = 'FW436_0B29140042F9AA27'
>  usb_device.linux.device_number = 29 (0x1d)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 10 (0xa)
>  usb_device.device_revision_bcd = 1078 (0x436)
>  info.product = 'FHD-Classic'
>  usb_device.product = 'FHD-Classic'
>  info.vendor = 'Freecom Technologies'
>  usb_device.vendor = 'Freecom Technologies'
>  usb_device.product_id = 64717 (0xfccd)
>  usb_device.vendor_id = 1963 (0x7ab)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 0 (0x0)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4'
>
>  3: udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/power/PWRF'
>
>  4: udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
>  linux.hotplug_type = 4 (0x4)
>  button.has_state = false
>  info.capabilities = { 'button' }
>  info.category = 'button'
>  info.product = 'Power Button'
>  button.type = 'power'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 4 (0x4)
>  linux.acpi_path = '/proc/acpi/button/power/PWRB'
>
>  5: udi = '/org/freedesktop/Hal/devices/acpi_CPU'
>  info.udi = '/org/freedesktop/Hal/devices/acpi_CPU'
>  linux.hotplug_type = 4 (0x4)
>  processor.can_throttle = false
>  processor.number = 0 (0x0)
>  info.capabilities = { 'processor' }
>  info.category = 'processor'
>  info.product = 'Processor'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.acpi_type = 1 (0x1)
>  linux.acpi_path = '/proc/acpi/processor/CPU'
>
>  6: udi = '/org/freedesktop/Hal/devices/volume_part1_size_995226624'
>  info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_995226624'
>  volume.partition.msdos_part_table_type = 130 (0x82)
>  info.product = 'Volume (swap)'
>  volume.size = 995226624ull (0x3b51f400ull)
>  volume.num_blocks = 1943802 (0x1da8fa)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 1 (0x1)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = false
>  volume.mount_point = ''
>  volume.label = ''
>  volume.uuid = ''
>  volume.fsversion = '2'
>  volume.fsusage = 'other'
>  volume.fstype = 'swap'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S013J10WB36015'
>  block.is_volume = true
>  block.minor = 1 (0x1)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda1'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_S013J10WB36015'
>  linux.sysfs_path_device = '/sys/block/hda/hda1'
>  linux.sysfs_path = '/sys/block/hda/hda1'
>
>  7: udi = '/org/freedesktop/Hal/devices/volume_uuid_f37ee927_92aa_47ee_a279_fd4c9dc5438e'
>  volume.policy.desired_mount_point = 'idedisk'
>  volume.policy.mount_filesystem = 'reiserfs'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_f37ee927_92aa_47ee_a279_fd4c9dc5438e'
>  volume.partition.msdos_part_table_type = 131 (0x83)
>  info.product = 'Volume (reiserfs)'
>  volume.size = 159035788800ull (0x2507458e00ull)
>  volume.num_blocks = 310616775 (0x1283a2c7)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 2 (0x2)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = true
>  volume.mount_point = '/'
>  volume.label = ''
>  volume.uuid = 'f37ee927-92aa-47ee-a279-fd4c9dc5438e'
>  volume.fsversion = '3.6'
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'reiserfs'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S013J10WB36015'
>  block.is_volume = true
>  block.minor = 2 (0x2)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda2'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_S013J10WB36015'
>  linux.sysfs_path_device = '/sys/block/hda/hda2'
>  linux.sysfs_path = '/sys/block/hda/hda2'
>
>  8: udi = '/org/freedesktop/Hal/devices/storage_serial_S013J10WB36015'
>  storage.policy.should_mount = false
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_S013J10WB36015'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_S013J10WB36015'
>  storage.firmware_version = 'TM100-23'
>  storage.serial = 'S013J10WB36015'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  info.product = 'SAMSUNG SP1604N'
>  storage.removable = false
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_0'
>  storage.drive_type = 'disk'
>  storage.vendor = ''
>  storage.model = 'SAMSUNG SP1604N'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = false
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 3 (0x3)
>  block.device = '/dev/hda'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_0'
>  linux.sysfs_path_device = '/sys/block/hda'
>  linux.sysfs_path = '/sys/block/hda'
>
>  9: udi = '/org/freedesktop/Hal/devices/volume_uuid_F0E0783FE0780E5A'
>  volume.policy.desired_mount_point = 'WINXP'
>  volume.policy.mount_filesystem = 'ntfs'
>  volume.policy.should_mount = true
>  info.udi = '/org/freedesktop/Hal/devices/volume_uuid_F0E0783FE0780E5A'
>  volume.partition.msdos_part_table_type = 7 (0x7)
>  info.product = 'WINXP'
>  volume.size = 80023716864ull (0x12a1c90400ull)
>  volume.num_blocks = 156296322 (0x950e482)
>  volume.block_size = 512 (0x200)
>  volume.partition.number = 1 (0x1)
>  info.capabilities = { 'volume', 'block' }
>  info.category = 'volume'
>  volume.is_partition = true
>  volume.is_disc = false
>  volume.is_mounted = true
>  volume.mount_point = '/windows/C'
>  volume.label = 'WINXP'
>  volume.uuid = 'F0E0783FE0780E5A'
>  volume.fsversion = '3.1'
>  volume.fsusage = 'filesystem'
>  volume.fstype = 'ntfs'
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5GC0YPFW'
>  block.is_volume = true
>  block.minor = 65 (0x41)
>  block.major = 3 (0x3)
>  block.device = '/dev/hdb1'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/storage_serial_5GC0YPFW'
>  linux.sysfs_path_device = '/sys/block/hdb/hdb1'
>  linux.sysfs_path = '/sys/block/hdb/hdb1'
>
>  10: udi = '/org/freedesktop/Hal/devices/storage_serial_5GC0YPFW'
>  storage.policy.should_mount = false
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_5GC0YPFW'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_5GC0YPFW'
>  storage.firmware_version = '3.39'
>  storage.serial = '5GC0YPFW'
>  storage.requires_eject = false
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block' }
>  info.category = 'storage'
>  info.product = 'ST380020A'
>  storage.removable = false
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_1'
>  storage.drive_type = 'disk'
>  storage.vendor = ''
>  storage.model = 'ST380020A'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = false
>  storage.no_partitions_hint = false
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 64 (0x40)
>  block.major = 3 (0x3)
>  block.device = '/dev/hdb'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_1'
>  linux.sysfs_path_device = '/sys/block/hdb'
>  linux.sysfs_path = '/sys/block/hdb'
>
>  11: udi = '/org/freedesktop/Hal/devices/storage_serial_DL100526036668'
>  info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' }
>  resmgr.class = 'cdrom'
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' }
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrecorder'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_DL100526036668'
>  info.udi = '/org/freedesktop/Hal/devices/storage_serial_DL100526036668'
>  storage.cdrom.write_speed = 7056 (0x1b90)
>  storage.cdrom.read_speed = 7056 (0x1b90)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = true
>  storage.cdrom.dvdplusrw = true
>  storage.cdrom.dvdplusr = true
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = true
>  storage.cdrom.dvd = true
>  storage.cdrom.cdrw = true
>  storage.cdrom.cdr = true
>  storage.firmware_version = 'B1.8'
>  storage.serial = 'DL100526036668'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'PHILIPS PBDV16LSP1'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_0'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'PHILIPS PBDV16LSP1'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 0 (0x0)
>  block.major = 22 (0x16)
>  block.device = '/dev/hdc'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_0'
>  linux.sysfs_path_device = '/sys/block/hdc'
>  linux.sysfs_path = '/sys/block/hdc'
>
>  12: udi = '/org/freedesktop/Hal/devices/storage_model_PHILIPS_DVDR1640P'
>  info.callouts.remove = { 'hal-resmgr', 'hald-subfs-mount' }
>  resmgr.class = 'cdrom'
>  info.callouts.add = { 'hald-add-selinux-mount-option', 'hal-resmgr', 'hald-subfs-mount' }
>  info.addons = { 'hald-addon-storage' }
>  storage.policy.desired_mount_point = 'cdrecorder'
>  storage.policy.mount_filesystem = 'auto'
>  storage.policy.should_mount = true
>  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_PHILIPS_DVDR1640P'
>  info.udi = '/org/freedesktop/Hal/devices/storage_model_PHILIPS_DVDR1640P'
>  storage.cdrom.write_speed = 7056 (0x1b90)
>  storage.cdrom.read_speed = 7056 (0x1b90)
>  storage.cdrom.support_media_changed = true
>  storage.cdrom.dvdplusrdl = true
>  storage.cdrom.dvdplusrw = true
>  storage.cdrom.dvdplusr = true
>  storage.cdrom.dvdram = false
>  storage.cdrom.dvdrw = false
>  storage.cdrom.dvdr = true
>  storage.cdrom.dvd = true
>  storage.cdrom.cdrw = true
>  storage.cdrom.cdr = true
>  storage.firmware_version = 'P3.4'
>  storage.requires_eject = true
>  storage.hotpluggable = false
>  info.capabilities = { 'storage', 'block', 'storage.cdrom' }
>  info.category = 'storage'
>  info.product = 'PHILIPS DVDR1640P'
>  storage.removable = true
>  storage.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_1'
>  storage.drive_type = 'cdrom'
>  storage.vendor = ''
>  storage.model = 'PHILIPS DVDR1640P'
>  storage.automount_enabled_hint = true
>  storage.media_check_enabled = true
>  storage.no_partitions_hint = true
>  storage.bus = 'ide'
>  block.is_volume = false
>  block.minor = 64 (0x40)
>  block.major = 22 (0x16)
>  block.device = '/dev/hdd'
>  linux.hotplug_type = 3 (0x3)
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_1'
>  linux.sysfs_path_device = '/sys/block/hdd'
>  linux.sysfs_path = '/sys/block/hdd'
>
>  13: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
>  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/timer'
>  linux.device_file = '/dev/snd/timer'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  alsa.device_file = '/dev/snd/timer'
>  info.product = 'ALSA Timer Device'
>  alsa.type = 'timer'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.sysfs_path = '/sys/class/sound/timer'
>
>  14: udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
>  info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/seq'
>  linux.device_file = '/dev/snd/seq'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  alsa.device_file = '/dev/snd/seq'
>  info.product = 'ALSA Sequencer Device'
>  alsa.type = 'sequencer'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  linux.sysfs_path = '/sys/class/sound/seq'
>
>  15: udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Aux_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Aux Port'
>  serio.description = 'i8042 Aux Port'
>  serio.id = 'serio0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio0'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio0'
>
>  16: udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  info.udi = '/org/freedesktop/Hal/devices/computer_i8042_Kbd_Port'
>  linux.subsystem = 'serio'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'i8042 Kbd Port'
>  serio.description = 'i8042 Kbd Port'
>  serio.id = 'serio1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'serio'
>  linux.sysfs_path_device = '/sys/devices/platform/i8042/serio1'
>  linux.sysfs_path = '/sys/devices/platform/i8042/serio1'
>
>  17: udi = '/org/freedesktop/Hal/devices/pci_10de_1a4'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1a4'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'nForce CPU bridge'
>  pci.product = 'nForce CPU bridge'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 420 (0x1a4)
>  info.linux.driver = 'agpgart-nvidia'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0'
>
>  18: udi = '/org/freedesktop/Hal/devices/pci_10de_1ac'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1ac'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0c11)'
>  pci.subsys_vendor = 'nVidia Corporation'
>  info.product = 'nForce 220/420 Memory Controller'
>  pci.product = 'nForce 220/420 Memory Controller'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 5 (0x5)
>  pci.subsys_vendor_id = 4318 (0x10de)
>  pci.subsys_product_id = 3089 (0xc11)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 428 (0x1ac)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.1'
>
>  19: udi = '/org/freedesktop/Hal/devices/pci_10de_1ad'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1ad'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0c11)'
>  pci.subsys_vendor = 'nVidia Corporation'
>  info.product = 'nForce 220/420 Memory Controller'
>  pci.product = 'nForce 220/420 Memory Controller'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 5 (0x5)
>  pci.subsys_vendor_id = 4318 (0x10de)
>  pci.subsys_product_id = 3089 (0xc11)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 429 (0x1ad)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.2'
>
>  20: udi = '/org/freedesktop/Hal/devices/pci_10de_1aa'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1aa'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0c11)'
>  pci.subsys_vendor = 'nVidia Corporation'
>  info.product = 'Unknown (0x01aa)'
>  pci.product = 'Unknown (0x01aa)'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 5 (0x5)
>  pci.subsys_vendor_id = 4318 (0x10de)
>  pci.subsys_product_id = 3089 (0xc11)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 426 (0x1aa)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.3'
>
>  21: udi = '/org/freedesktop/Hal/devices/pci_10de_1b2'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b2'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0c11)'
>  pci.subsys_vendor = 'nVidia Corporation'
>  info.product = 'nForce ISA Bridge'
>  pci.product = 'nForce ISA Bridge'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 4318 (0x10de)
>  pci.subsys_product_id = 3089 (0xc11)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 434 (0x1b2)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0'
>
>  22: udi = '/org/freedesktop/Hal/devices/pci_10de_1b4'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b4'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0c11)'
>  pci.subsys_vendor = 'nVidia Corporation'
>  info.product = 'nForce PCI System Management'
>  pci.product = 'nForce PCI System Management'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 5 (0x5)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4318 (0x10de)
>  pci.subsys_product_id = 3089 (0xc11)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 436 (0x1b4)
>  info.linux.driver = 'amd756_smbus'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1'
>
>  23: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_02_0_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_02_0_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-15-default ohci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 3 (0x3)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:02.0'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_02_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-0:1.0'
>
>  24: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if0_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if0_logicaldev_input'
>  input.product = 'Logitech USB Receiver'
>  info.product = 'Logitech USB Receiver'
>  linux.device_file = '/dev/input/event1'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event1'
>  info.capabilities = { 'input', 'input.keyboard' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if0'
>  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if0'
>  linux.sysfs_path = '/sys/class/input/event1'
>
>  25: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB HID Interface'
>  usb.interface.protocol = 1 (0x1)
>  usb.interface.subclass = 1 (0x1)
>  usb.interface.class = 3 (0x3)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'usbhid'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 2 (0x2)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1133 (0x46d)
>  usb.product_id = 50450 (0xc512)
>  usb.vendor = 'Logitech, Inc.'
>  usb.product = 'USB HID Interface'
>  usb.device_revision_bcd = 14592 (0x3900)
>  usb.max_power = 98 (0x62)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.speed_bcd = 336 (0x150)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = false
>  usb.can_wake_up = true
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0'
>
>  26: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if1_logicaldev_input'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if1_logicaldev_input'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.hack.add_usb_parent = true
>  resmgr.class = 'input'
>  resmgr.device = '/dev/input/event2'
>  input.product = 'Logitech USB Receiver'
>  info.product = 'Logitech USB Receiver'
>  linux.device_file = '/dev/input/event2'
>  linux.subsystem = 'input'
>  linux.hotplug_type = 2 (0x2)
>  input.device = '/dev/input/event2'
>  info.capabilities = { 'input', 'input.mouse', 'input.keyboard' }
>  info.category = 'input'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if1'
>  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if1'
>  linux.sysfs_path = '/sys/class/input/event2'
>
>  27: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if1'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if1'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB HID Interface'
>  usb.interface.protocol = 2 (0x2)
>  usb.interface.subclass = 1 (0x1)
>  usb.interface.class = 3 (0x3)
>  usb.interface.number = 1 (0x1)
>  info.linux.driver = 'usbhid'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.1'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 2 (0x2)
>  usb.device_class = 0 (0x0)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 1133 (0x46d)
>  usb.product_id = 50450 (0xc512)
>  usb.vendor = 'Logitech, Inc.'
>  usb.product = 'USB HID Interface'
>  usb.device_revision_bcd = 14592 (0x3900)
>  usb.max_power = 98 (0x62)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.speed_bcd = 336 (0x150)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = false
>  usb.can_wake_up = true
>  usb.bus_number = 1 (0x1)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.1'
>
>  28: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial'
>  info.capabilities = { 'battery' }
>  battery.charge_level.percentage = 100 (0x64)
>  battery.charge_level.current = 7 (0x7)
>  battery.command_interface = 'csr'
>  info.category = 'battery'
>  battery.charge_level.last_full = 7 (0x7)
>  battery.charge_level.design = 7 (0x7)
>  battery.is_rechargeable = false
>  battery.present = true
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c512_noserial'
>  battery.csr.is_dual = false
>  battery.csr.has_sms = false
>  battery.csr.has_res = false
>  battery.type = 'keyboard'
>  info.addons = { 'hald-addon-usb-csr' }
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = false
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 336 (0x150)
>  usb_device.linux.device_number = 2 (0x2)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 98 (0x62)
>  usb_device.device_revision_bcd = 14592 (0x3900)
>  info.product = 'USB Receiver'
>  usb_device.product = 'USB Receiver'
>  info.vendor = 'Logitech, Inc.'
>  usb_device.vendor = 'Logitech, Inc.'
>  usb_device.product_id = 50450 (0xc512)
>  usb_device.vendor_id = 1133 (0x46d)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 0 (0x0)
>  usb_device.num_interfaces = 2 (0x2)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_02_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb1/1-1'
>
>  29: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_02_0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_02_0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 1 (0x1)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:02.0'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 3 (0x3)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'OHCI Host Controller'
>  usb_device.product = 'OHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-15-default ohci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-15-default ohci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb1'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1c2_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0/usb1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb1'
>
>  30: udi = '/org/freedesktop/Hal/devices/pci_10de_1c2_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1c2_0'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0c11)'
>  pci.subsys_vendor = 'nVidia Corporation'
>  info.product = 'nForce USB Controller'
>  pci.product = 'nForce USB Controller'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 16 (0x10)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4318 (0x10de)
>  pci.subsys_product_id = 3089 (0xc11)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 450 (0x1c2)
>  info.linux.driver = 'ohci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:02.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0'
>
>  31: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-15-default ohci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 3 (0x3)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:00:03.0'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 2 (0x2)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0'
>
>  32: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 2 (0x2)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:00:03.0'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 3 (0x3)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'OHCI Host Controller'
>  usb_device.product = 'OHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-15-default ohci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-15-default ohci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1c2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0/usb2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0/usb2'
>
>  33: udi = '/org/freedesktop/Hal/devices/pci_10de_1c2'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1c2'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0c11)'
>  pci.subsys_vendor = 'nVidia Corporation'
>  info.product = 'nForce USB Controller'
>  pci.product = 'nForce USB Controller'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 16 (0x10)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4318 (0x10de)
>  pci.subsys_product_id = 3089 (0xc11)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 450 (0x1c2)
>  info.linux.driver = 'ohci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:03.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:03.0'
>
>  34: udi = '/org/freedesktop/Hal/devices/net_00_0c_6e_87_d8_39'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_0c_6e_87_d8_39'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 53394004025ull (0xc6e87d839ull)
>  info.product = 'Networking Interface'
>  net.interface_up = false
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 3 (0x3)
>  net.address = '00:0c:6e:87:d8:39'
>  net.interface = 'eth0'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1c3'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1c3'
>  linux.sysfs_path = '/sys/class/net/eth0'
>
>  35: udi = '/org/freedesktop/Hal/devices/pci_10de_1c3'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1c3'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0c11)'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'nForce Ethernet Controller'
>  pci.product = 'nForce Ethernet Controller'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 3089 (0xc11)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 451 (0x1c3)
>  info.linux.driver = 'forcedeth'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:04.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0'
>
>  36: udi = '/org/freedesktop/Hal/devices/pci_10de_1b0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b0'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0c11)'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'nForce Audio'
>  pci.product = 'nForce Audio'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 3089 (0xc11)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 432 (0x1b0)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:05.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:05.0'
>
>  37: udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_alsa_playback_0_2'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_alsa_playback_0_2'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D2p'
>  linux.device_file = '/dev/snd/pcmC0D2p'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'NVidia nForce - IEC958 ALSA Playback Device'
>  alsa.type = 'playback'
>  alsa.device_id = 'NVidia nForce - IEC958'
>  alsa.card_id = 'nForce'
>  alsa.device = 2 (0x2)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  alsa.device_file = '/dev/snd/pcmC0D2p'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D2p'
>
>  38: udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_alsa_capture_0_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_alsa_capture_0_1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D1c'
>  linux.device_file = '/dev/snd/pcmC0D1c'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'NVidia nForce - MIC ADC ALSA Capture Device'
>  alsa.type = 'capture'
>  alsa.device_id = 'NVidia nForce - MIC ADC'
>  alsa.card_id = 'nForce'
>  alsa.device = 1 (0x1)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  alsa.device_file = '/dev/snd/pcmC0D1c'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D1c'
>
>  39: udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_alsa_playback_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_alsa_playback_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D0p'
>  linux.device_file = '/dev/snd/pcmC0D0p'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'NVidia nForce ALSA Playback Device'
>  alsa.type = 'playback'
>  alsa.device_id = 'NVidia nForce'
>  alsa.card_id = 'nForce'
>  alsa.device = 0 (0x0)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  alsa.device_file = '/dev/snd/pcmC0D0p'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D0p'
>
>  40: udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_alsa_capture_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_alsa_capture_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/pcmC0D0c'
>  linux.device_file = '/dev/snd/pcmC0D0c'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'NVidia nForce ALSA Capture Device'
>  alsa.type = 'capture'
>  alsa.device_id = 'NVidia nForce'
>  alsa.card_id = 'nForce'
>  alsa.device = 0 (0x0)
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  alsa.device_file = '/dev/snd/pcmC0D0c'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/pcmC0D0c'
>
>  41: udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_alsa_control_0__1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_alsa_control_0__1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/snd/controlC0'
>  linux.device_file = '/dev/snd/controlC0'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'nForce ALSA Control Device'
>  alsa.card_id = 'nForce'
>  alsa.type = 'control'
>  alsa.card = 0 (0x0)
>  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  alsa.device_file = '/dev/snd/controlC0'
>  info.capabilities = { 'alsa' }
>  info.category = 'alsa'
>  linux.sysfs_path = '/sys/class/sound/controlC0'
>
>  42: udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_oss_mixer_0__1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_oss_mixer_0__1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/mixer'
>  linux.device_file = '/dev/mixer'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'NVidia nForce OSS Control Device'
>  oss.type = 'mixer'
>  oss.device_id = 'NVidia nForce'
>  oss.card_id = 'nForce'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  oss.device_file = '/dev/mixer'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/mixer'
>
>  43: udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_oss_pcm_0_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_oss_pcm_0_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/dsp'
>  linux.device_file = '/dev/dsp'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'NVidia nForce OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 0 (0x0)
>  oss.device_id = 'NVidia nForce'
>  oss.card_id = 'nForce'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  oss.device_file = '/dev/dsp'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/dsp'
>
>  44: udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_oss_pcm_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_oss_pcm_0_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/audio'
>  linux.device_file = '/dev/audio'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'NVidia nForce OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 0 (0x0)
>  oss.device_id = 'NVidia nForce'
>  oss.card_id = 'nForce'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  oss.device_file = '/dev/audio'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/audio'
>
>  45: udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_oss_pcm_0_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b1_oss_pcm_0_1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'sound'
>  resmgr.device = '/dev/adsp'
>  linux.device_file = '/dev/adsp'
>  linux.subsystem = 'sound'
>  linux.hotplug_type = 2 (0x2)
>  info.product = 'NVidia nForce OSS PCM Device'
>  oss.type = 'pcm'
>  oss.device = 1 (0x1)
>  oss.device_id = 'NVidia nForce'
>  oss.card_id = 'nForce'
>  oss.card = 0 (0x0)
>  oss.physical_device = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  oss.device_file = '/dev/adsp'
>  info.capabilities = { 'oss' }
>  info.category = 'oss'
>  linux.sysfs_path = '/sys/class/sound/adsp'
>
>  46: udi = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b1'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x8384)'
>  pci.subsys_vendor = 'ASUSTeK Computer Inc.'
>  info.product = 'nForce Audio'
>  pci.product = 'nForce Audio'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 4 (0x4)
>  pci.subsys_vendor_id = 4163 (0x1043)
>  pci.subsys_product_id = 33668 (0x8384)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 433 (0x1b1)
>  info.linux.driver = 'Intel ICH'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:06.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0'
>
>  47: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-15-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:01:07.0'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 3 (0x3)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-0:1.0'
>
>  48: udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Vendor Specific Interface'
>  usb.interface.protocol = 255 (0xff)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 255 (0xff)
>  usb.interface.number = 0 (0x0)
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2/3-2:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 255 (0xff)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 255 (0xff)
>  usb.vendor_id = 1193 (0x4a9)
>  usb.product_id = 8718 (0x220e)
>  usb.vendor = 'Canon, Inc.'
>  usb.product = 'USB Vendor Specific Interface'
>  usb.device_revision_bcd = 256 (0x100)
>  usb.max_power = 500 (0x1f4)
>  usb.num_ports = 0 (0x0)
>  usb.linux.device_number = 2 (0x2)
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = false
>  usb.can_wake_up = true
>  usb.bus_number = 3 (0x3)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2/3-2:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2/3-2:1.0'
>
>  49: udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 3 (0x3)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = false
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.linux.device_number = 2 (0x2)
>  usb_device.num_ports = 0 (0x0)
>  usb_device.max_power = 500 (0x1f4)
>  usb_device.device_revision_bcd = 256 (0x100)
>  info.product = 'CanoScan N1240U/LiDE 30'
>  usb_device.product = 'CanoScan N1240U/LiDE 30'
>  info.vendor = 'Canon, Inc.'
>  usb_device.vendor = 'Canon, Inc.'
>  usb_device.product_id = 8718 (0x220e)
>  usb_device.vendor_id = 1193 (0x4a9)
>  usb_device.device_protocol = 255 (0xff)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 255 (0xff)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2'
>
>  50: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 3 (0x3)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:01:07.0'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-15-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-15-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3'
>
>  51: udi = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038_0'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x3038)'
>  pci.subsys_vendor = 'VIA Technologies, Inc.'
>  info.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  pci.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4358 (0x1106)
>  pci.subsys_product_id = 12344 (0x3038)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12344 (0x3038)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b8'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.0'
>
>  52: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4/4-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 0 (0x0)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-15-default uhci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 2 (0x2)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:01:07.1'
>  usb.speed_bcd = 4608 (0x1200)
>  usb.version_bcd = 272 (0x110)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 4 (0x4)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4/4-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4/4-0:1.0'
>
>  53: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 4 (0x4)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 272 (0x110)
>  usb_device.speed_bcd = 4608 (0x1200)
>  usb_device.serial = '0000:01:07.1'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 2 (0x2)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'UHCI Host Controller'
>  usb_device.product = 'UHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-15-default uhci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-15-default uhci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 0 (0x0)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3038'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4'
>
>  54: udi = '/org/freedesktop/Hal/devices/pci_1106_3038'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3038'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x3038)'
>  pci.subsys_vendor = 'VIA Technologies, Inc.'
>  info.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  pci.product = 'VT82xxxxx UHCI USB 1.1 Controller'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4358 (0x1106)
>  pci.subsys_product_id = 12344 (0x3038)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12344 (0x3038)
>  info.linux.driver = 'uhci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b8'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.1'
>
>  55: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2_if0'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2_if0'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'USB Hub Interface'
>  usb.interface.protocol = 0 (0x0)
>  usb.interface.subclass = 0 (0x0)
>  usb.interface.class = 9 (0x9)
>  usb.interface.number = 0 (0x0)
>  info.linux.driver = 'hub'
>  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-0:1.0'
>  usb.configuration_value = 1 (0x1)
>  usb.num_configurations = 1 (0x1)
>  usb.num_interfaces = 1 (0x1)
>  usb.device_class = 9 (0x9)
>  usb.device_subclass = 0 (0x0)
>  usb.device_protocol = 1 (0x1)
>  usb.vendor_id = 0 (0x0)
>  usb.product_id = 0 (0x0)
>  usb.vendor = 'Linux 2.6.13-15-default ehci_hcd'
>  usb.product = 'USB Hub Interface'
>  usb.device_revision_bcd = 518 (0x206)
>  usb.max_power = 0 (0x0)
>  usb.num_ports = 4 (0x4)
>  usb.linux.device_number = 1 (0x1)
>  usb.serial = '0000:01:07.2'
>  usb.speed_bcd = 294912 (0x48000)
>  usb.version_bcd = 512 (0x200)
>  usb.is_self_powered = true
>  usb.can_wake_up = true
>  usb.bus_number = 5 (0x5)
>  info.bus = 'usb'
>  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-0:1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-0:1.0'
>
>  56: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2'
>  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2'
>  linux.subsystem = 'usb'
>  linux.hotplug_type = 1 (0x1)
>  usb_device.bus_number = 5 (0x5)
>  usb_device.can_wake_up = true
>  usb_device.is_self_powered = true
>  usb_device.version_bcd = 512 (0x200)
>  usb_device.speed_bcd = 294912 (0x48000)
>  usb_device.serial = '0000:01:07.2'
>  usb_device.linux.device_number = 1 (0x1)
>  usb_device.num_ports = 4 (0x4)
>  usb_device.max_power = 0 (0x0)
>  usb_device.device_revision_bcd = 518 (0x206)
>  info.product = 'EHCI Host Controller'
>  usb_device.product = 'EHCI Host Controller'
>  info.vendor = 'Linux 2.6.13-15-default ehci_hcd'
>  usb_device.vendor = 'Linux 2.6.13-15-default ehci_hcd'
>  usb_device.product_id = 0 (0x0)
>  usb_device.vendor_id = 0 (0x0)
>  usb_device.device_protocol = 1 (0x1)
>  usb_device.device_subclass = 0 (0x0)
>  usb_device.device_class = 9 (0x9)
>  usb_device.num_interfaces = 1 (0x1)
>  usb_device.num_configurations = 1 (0x1)
>  usb_device.configuration_value = 1 (0x1)
>  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5'
>  info.linux.driver = 'usb'
>  info.bus = 'usb_device'
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3104'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5'
>
>  57: udi = '/org/freedesktop/Hal/devices/pci_1106_3104'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3104'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x3104)'
>  pci.subsys_vendor = 'VIA Technologies, Inc.'
>  info.product = 'USB 2.0'
>  pci.product = 'USB 2.0'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 32 (0x20)
>  pci.device_subclass = 3 (0x3)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4358 (0x1106)
>  pci.subsys_product_id = 12548 (0x3104)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12548 (0x3104)
>  info.linux.driver = 'ehci_hcd'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b8'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.2'
>
>  58: udi = '/org/freedesktop/Hal/devices/ieee1394_guid_1106000000e332'
>  info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid_1106000000e332'
>  linux.subsystem = 'ieee1394'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Unknown (0x001106)'
>  info.vendor = 'Unknown (0x001106)'
>  ieee1394.product = 'Unknown (0x001106)'
>  ieee1394.product_id = 0 (0x0)
>  ieee1394.vendor = 'Unknown (0x001106)'
>  ieee1394.version = 1 (0x1)
>  ieee1394.specifier_id = 94 (0x5e)
>  ieee1394.vendor_id = 4358 (0x1106)
>  ieee1394.guid = 4791671673905970ull (0x1106000000e332ull)
>  info.parent = '/org/freedesktop/Hal/devices/pci_1106_3044'
>  info.bus = 'ieee1394'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.3/fw-host0/001106000000e332/001106000000e332-0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.3/fw-host0/001106000000e332/001106000000e332-0'
>
>  59: udi = '/org/freedesktop/Hal/devices/pci_1106_3044'
>  info.udi = '/org/freedesktop/Hal/devices/pci_1106_3044'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x3044)'
>  pci.subsys_vendor = 'VIA Technologies, Inc.'
>  info.product = 'IEEE 1394 Host Controller'
>  pci.product = 'IEEE 1394 Host Controller'
>  info.vendor = 'VIA Technologies, Inc.'
>  pci.vendor = 'VIA Technologies, Inc.'
>  pci.device_protocol = 16 (0x10)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 12 (0xc)
>  pci.subsys_vendor_id = 4358 (0x1106)
>  pci.subsys_product_id = 12356 (0x3044)
>  pci.vendor_id = 4358 (0x1106)
>  pci.product_id = 12356 (0x3044)
>  info.linux.driver = 'ohci1394'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.3'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b8'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.3'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:07.3'
>
>  60: udi = '/org/freedesktop/Hal/devices/net_00_40_f4_a7_87_1c'
>  info.udi = '/org/freedesktop/Hal/devices/net_00_40_f4_a7_87_1c'
>  linux.subsystem = 'net'
>  linux.hotplug_type = 2 (0x2)
>  net.80203.mac_address = 278982526748ull (0x40f4a7871cull)
>  info.product = 'Networking Interface'
>  net.interface_up = true
>  net.arp_proto_hw_id = 1 (0x1)
>  net.linux.ifindex = 4 (0x4)
>  net.address = '00:40:f4:a7:87:1c'
>  net.interface = 'eth1'
>  net.physical_device = '/org/freedesktop/Hal/devices/pci_10ec_8139'
>  info.capabilities = { 'net', 'net.80203' }
>  info.category = 'net.80203'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10ec_8139'
>  linux.sysfs_path = '/sys/class/net/eth1'
>
>  61: udi = '/org/freedesktop/Hal/devices/pci_10ec_8139'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10ec_8139'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'RT8139'
>  pci.subsys_vendor = 'Realtek Semiconductor Co., Ltd.'
>  info.product = 'RTL-8139/8139C/8139C+'
>  pci.product = 'RTL-8139/8139C/8139C+'
>  info.vendor = 'Realtek Semiconductor Co., Ltd.'
>  pci.vendor = 'Realtek Semiconductor Co., Ltd.'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 2 (0x2)
>  pci.subsys_vendor_id = 4332 (0x10ec)
>  pci.subsys_product_id = 33081 (0x8139)
>  pci.vendor_id = 4332 (0x10ec)
>  pci.product_id = 33081 (0x8139)
>  info.linux.driver = '8139too'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b8'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0/0000:01:08.0'
>
>  62: udi = '/org/freedesktop/Hal/devices/pci_10de_1b8'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b8'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'nForce PCI-to-PCI bridge'
>  pci.product = 'nForce PCI-to-PCI bridge'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 440 (0x1b8)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:08.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0'
>
>  63: udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-disk'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:09.0/ide0/0.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/ide0/0.0'
>
>  64: udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_0_1'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (slave)'
>  ide.channel = 1 (0x1)
>  ide.host = 0 (0x0)
>  info.linux.driver = 'ide-disk'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:09.0/ide0/0.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/ide0/0.1'
>
>  65: udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_0'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (master)'
>  ide.channel = 0 (0x0)
>  ide.host = 1 (0x1)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:09.0/ide1/1.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/ide1/1.0'
>
>  66: udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_1'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1bc_ide_1_1'
>  linux.subsystem = 'ide'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'IDE device (slave)'
>  ide.channel = 1 (0x1)
>  ide.host = 1 (0x1)
>  info.linux.driver = 'ide-cdrom'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1bc'
>  info.bus = 'ide'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:09.0/ide1/1.1'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/ide1/1.1'
>
>  67: udi = '/org/freedesktop/Hal/devices/pci_10de_1bc'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1bc'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0c11)'
>  pci.subsys_vendor = 'nVidia Corporation'
>  info.product = 'nForce IDE'
>  pci.product = 'nForce IDE'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 138 (0x8a)
>  pci.device_subclass = 1 (0x1)
>  pci.device_class = 1 (0x1)
>  pci.subsys_vendor_id = 4318 (0x10de)
>  pci.subsys_product_id = 3089 (0xc11)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 444 (0x1bc)
>  info.linux.driver = 'AMD_IDE'
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:09.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0'
>
>  68: udi = '/org/freedesktop/Hal/devices/pci_10de_1a0'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1a0'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0c11)'
>  pci.subsys_vendor = 'nVidia Corporation'
>  info.product = 'NVCrush11 [GeForce2 MX Integrated Graphics]'
>  pci.product = 'NVCrush11 [GeForce2 MX Integrated Graphics]'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 0 (0x0)
>  pci.device_class = 3 (0x3)
>  pci.subsys_vendor_id = 4318 (0x10de)
>  pci.subsys_product_id = 3089 (0xc11)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 416 (0x1a0)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:00.0'
>  info.parent = '/org/freedesktop/Hal/devices/pci_10de_1b7'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:00.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:02:00.0'
>
>  69: udi = '/org/freedesktop/Hal/devices/pci_10de_1b7'
>  info.udi = '/org/freedesktop/Hal/devices/pci_10de_1b7'
>  linux.subsystem = 'pci'
>  linux.hotplug_type = 1 (0x1)
>  pci.subsys_product = 'Unknown (0x0000)'
>  pci.subsys_vendor = 'Unknown (0x0000)'
>  info.product = 'nForce AGP to PCI Bridge'
>  pci.product = 'nForce AGP to PCI Bridge'
>  info.vendor = 'nVidia Corporation'
>  pci.vendor = 'nVidia Corporation'
>  pci.device_protocol = 0 (0x0)
>  pci.device_subclass = 4 (0x4)
>  pci.device_class = 6 (0x6)
>  pci.subsys_vendor_id = 0 (0x0)
>  pci.subsys_product_id = 0 (0x0)
>  pci.vendor_id = 4318 (0x10de)
>  pci.product_id = 439 (0x1b7)
>  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pci'
>  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0'
>  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0'
>
>  70: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'System Board'
>  pnp.description = 'System Board'
>  pnp.id = 'PNP0c01'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:00'
>  linux.sysfs_path = '/sys/devices/pnp0/00:00'
>
>  71: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_2'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:01'
>  linux.sysfs_path = '/sys/devices/pnp0/00:01'
>
>  72: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:02'
>  linux.sysfs_path = '/sys/devices/pnp0/00:02'
>
>  73: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:03'
>  linux.sysfs_path = '/sys/devices/pnp0/00:03'
>
>  74: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT DMA Controller'
>  pnp.description = 'AT DMA Controller'
>  pnp.id = 'PNP0200'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:04'
>  linux.sysfs_path = '/sys/devices/pnp0/00:04'
>
>  75: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT Real-Time Clock'
>  pnp.description = 'AT Real-Time Clock'
>  pnp.id = 'PNP0b00'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:05'
>  linux.sysfs_path = '/sys/devices/pnp0/00:05'
>
>  76: udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'AT-style speaker sound'
>  pnp.description = 'AT-style speaker sound'
>  pnp.id = 'PNP0800'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:06'
>  linux.sysfs_path = '/sys/devices/pnp0/00:06'
>
>  77: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Math Coprocessor'
>  pnp.description = 'Math Coprocessor'
>  pnp.id = 'PNP0c04'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:07'
>  linux.sysfs_path = '/sys/devices/pnp0/00:07'
>
>  78: udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0401'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'ECP printer port'
>  pnp.description = 'ECP printer port'
>  pnp.id = 'PNP0401'
>  info.linux.driver = 'parport_pc'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:08'
>  linux.sysfs_path = '/sys/devices/pnp0/00:08'
>
>  79: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_0'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'modem'
>  resmgr.device = '/dev/ttyS0'
>  linux.device_file = '/dev/ttyS0'
>  linux.subsystem = 'tty'
>  linux.hotplug_type = 2 (0x2)
>  info.product = '16550A-compatible COM port'
>  serial.type = 'platform'
>  serial.port = 0 (0x0)
>  serial.device = '/dev/ttyS0'
>  serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
>  info.capabilities = { 'serial' }
>  info.category = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
>  linux.sysfs_path = '/sys/class/tty/ttyS0'
>
>  80: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_0'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = '16550A-compatible COM port'
>  pnp.description = '16550A-compatible COM port'
>  pnp.id = 'PNP0501'
>  info.linux.driver = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:09'
>  linux.sysfs_path = '/sys/devices/pnp0/00:09'
>
>  81: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1'
>  info.callouts.remove = { 'hal-resmgr' }
>  info.callouts.add = { 'hal-resmgr' }
>  resmgr.class = 'modem'
>  resmgr.device = '/dev/ttyS1'
>  linux.device_file = '/dev/ttyS1'
>  linux.subsystem = 'tty'
>  linux.hotplug_type = 2 (0x2)
>  info.product = '16550A-compatible COM port'
>  serial.type = 'platform'
>  serial.port = 1 (0x1)
>  serial.device = '/dev/ttyS1'
>  serial.physical_device = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.capabilities = { 'serial' }
>  info.category = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.sysfs_path = '/sys/class/tty/ttyS1'
>
>  82: udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0501'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = '16550A-compatible COM port'
>  pnp.description = '16550A-compatible COM port'
>  pnp.id = 'PNP0501'
>  info.linux.driver = 'serial'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0a'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0a'
>
>  83: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)'
>  pnp.id = 'PNP0c02'
>  info.linux.driver = 'system'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0b'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0b'
>
>  84: udi = '/org/freedesktop/Hal/devices/pnp_PNPb006'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNPb006'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'MPU401 compatible'
>  pnp.description = 'MPU401 compatible'
>  pnp.id = 'PNPb006'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0c'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0c'
>
>  85: udi = '/org/freedesktop/Hal/devices/pnp_PNPb02f'
>  info.udi = '/org/freedesktop/Hal/devices/pnp_PNPb02f'
>  linux.subsystem = 'pnp'
>  linux.hotplug_type = 1 (0x1)
>  info.product = 'Joystick/Game port'
>  pnp.description = 'Joystick/Game port'
>  pnp.id = 'PNPb02f'
>  info.parent = '/org/freedesktop/Hal/devices/computer'
>  info.bus = 'pnp'
>  linux.sysfs_path_device = '/sys/devices/pnp0/00:0d'
>  linux.sysfs_path = '/sys/devices/pnp0/00:0d'
>
>  86: udi = '/org/freedesktop/Hal/devices/computer'
>  storage.policy.default.mount_option.exec = true
>  storage.policy.default.mount_option.pamconsole = true
>  storage.policy.default.mount_option.noauto = true
>  storage.policy.default.managed_keyword.secondary = 'kudzu'
>  storage.policy.default.managed_keyword.primary = 'managed'
>  storage.policy.default.use_managed_keyword = true
>  storage.policy.default.mount_root = '/media'
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-set-power-save' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', 'b' }
>  org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'SetPowerSave' }
>  info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement' }
>  info.addons = { 'hald-addon-acpi' }
>  system.product = 'System Name System Version'
>  system.vendor = 'System Manufacturer'
>  smbios.chassis.type = 'Tower'
>  smbios.chassis.manufacturer = 'Chassis Manufacture'
>  smbios.system.uuid = 'Not Settable'
>  smbios.system.serial = 'SYS-1234567890'
>  smbios.system.version = 'System Version'
>  smbios.system.product = 'System Name'
>  smbios.system.manufacturer = 'System Manufacturer'
>  smbios.bios.release_date = '04/29/2003'
>  smbios.bios.version = 'ASUS A7N266-VM ACPI BIOS Rev 1006'
>  smbios.bios.vendor = 'Award Software, Inc.'
>  power_management.acpi.linux.version = '20050408'
>  power_management.type = 'acpi'
>  power_management.is_enabled = true
>  system.formfactor = 'desktop'
>  system.kernel.machine = 'i686'
>  system.kernel.version = '2.6.13-15-default'
>  system.kernel.name = 'Linux'
>  info.udi = '/org/freedesktop/Hal/devices/computer'
>  info.product = 'Computer'
>  linux.sysfs_path_device = '(none)'
>  info.bus = 'unknown'
>----- hal device list end -----
>>> floppy.1: get nvram
>>> floppy.2: klog info
>>> bios.1: cmdline
>>> bios.1.1: apm
>>> bios.2: ram
>/dev/mem[0x400, 256]: mmap(, 4096,,,, 0x0) ok
>/dev/mem[0xc0000, 262144]: mmap(, 262144,,,, 0xc0000) ok
>  bios: 2 disks
>  bios: 640k low mem
>>> bios.2: rom
>----- SMBIOS Entry Point 0xf3ae0 - 0xf3afe -----
>  f3ae0  5f 53 4d 5f 21 1f 02 03 5d 00 00 00 00 00 00 00  "_SM_!...]......."
>  f3af0  5f 44 4d 49 5f 14 ab 04 10 3b 0f 00 28 00 23  "_DMI_....;..(.#"
>----- SMBIOS Entry Point end -----
>/dev/mem[0xf3b10, 1195]: mmap(, 4096,,,, 0xf3000) ok
>----- SMBIOS Structure Table 0xf3b10 - 0xf3fba -----
>  f3b10  00 14 00 00 01 02 00 f0 03 03 80 da cb 7f 00 00  "................"
>  f3b20  00 00 07 00 41 77 61 72 64 20 53 6f 66 74 77 61  "....Award Softwa"
>  f3b30  72 65 2c 20 49 6e 63 2e 00 41 53 55 53 20 41 37  "re, Inc..ASUS A7"
>  f3b40  4e 32 36 36 2d 56 4d 20 41 43 50 49 20 42 49 4f  "N266-VM ACPI BIO"
>  f3b50  53 20 52 65 76 20 31 30 30 36 00 30 34 2f 32 39  "S Rev 1006.04/29"
>  f3b60  2f 32 30 30 33 00 00 01 19 01 00 01 02 03 04 00  "/2003..........."
>  f3b70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06  "................"
>  f3b80  53 79 73 74 65 6d 20 4d 61 6e 75 66 61 63 74 75  "System Manufactu"
>  f3b90  72 65 72 00 53 79 73 74 65 6d 20 4e 61 6d 65 00  "rer.System Name."
>  f3ba0  53 79 73 74 65 6d 20 56 65 72 73 69 6f 6e 00 53  "System Version.S"
>  f3bb0  59 53 2d 31 32 33 34 35 36 37 38 39 30 00 00 02  "YS-1234567890..."
>  f3bc0  08 02 00 01 02 03 04 41 53 55 53 54 65 4b 20 43  ".......ASUSTeK C"
>  f3bd0  6f 6d 70 75 74 65 72 20 49 4e 43 2e 00 41 37 4e  "omputer INC..A7N"
>  f3be0  32 36 36 56 4d 00 52 45 56 20 31 2e 78 78 00 78  "266VM.REV 1.xx.x"
>  f3bf0  78 78 78 78 78 78 78 78 78 78 00 00 03 11 03 00  "xxxxxxxxxx......"
>  f3c00  01 07 02 03 04 03 03 03 02 00 00 00 02 43 68 61  ".............Cha"
>  f3c10  73 73 69 73 20 4d 61 6e 75 66 61 63 74 75 72 65  "ssis Manufacture"
>  f3c20  00 43 68 61 73 73 69 73 20 56 65 72 73 69 6f 6e  ".Chassis Version"
>  f3c30  00 43 68 61 73 73 69 73 20 53 65 72 69 61 6c 20  ".Chassis Serial "
>  f3c40  4e 75 6d 62 65 72 00 41 73 73 65 74 2d 31 32 33  "Number.Asset-123"
>  f3c50  34 35 36 37 38 39 30 00 00 04 20 04 00 01 03 01  "4567890... ....."
>  f3c60  02 81 06 00 00 ff fb 83 03 03 90 85 00 d0 07 d0  "................"
>  f3c70  07 41 01 08 00 09 00 ff ff 53 4f 43 4b 45 54 20  ".A.......SOCKET "
>  f3c80  41 00 41 75 74 68 65 6e 74 69 63 41 4d 44 00 41  "A.AuthenticAMD.A"
>  f3c90  4d 44 20 41 74 68 6c 6f 6e 28 54 4d 29 20 58 50  "MD Athlon(TM) XP"
>  f3ca0  20 50 72 6f 63 65 73 73 6f 72 00 00 05 14 05 00  " Processor......"
>  f3cb0  06 04 03 03 09 1c 00 00 05 04 02 06 00 07 00 02  "................"
>  f3cc0  00 00 06 0c 06 00 01 01 00 00 05 08 08 00 44 49  "..............DI"
>  f3cd0  4d 4d 20 31 00 00 06 0c 07 00 01 23 00 00 05 08  "MM 1.......#...."
>  f3ce0  08 00 44 49 4d 4d 20 32 00 00 07 13 08 00 01 80  "..DIMM 2........"
>  f3cf0  01 80 00 80 00 20 00 20 00 00 02 04 05 4c 31 20  "..... . .....L1 "
>  f3d00  43 61 63 68 65 00 00 07 13 09 00 01 81 01 00 20  "Cache.......... "
>  f3d10  80 01 30 00 30 00 00 02 04 05 4c 32 20 43 61 63  "..0.0.....L2 Cac"
>  f3d20  68 65 00 00 08 09 0a 00 01 16 00 00 00 50 52 49  "he...........PRI"
>  f3d30  4d 41 52 59 20 49 44 45 2f 48 44 44 00 00 08 09  "MARY IDE/HDD...."
>  f3d40  0b 00 01 16 00 00 00 53 45 43 4f 4e 44 41 52 59  ".......SECONDARY"
>  f3d50  20 49 44 45 2f 48 44 44 00 00 08 09 0c 00 01 17  " IDE/HDD........"
>  f3d60  00 00 00 46 4c 4f 50 50 59 00 00 08 09 0d 00 00  "...FLOPPY......."
>  f3d70  00 01 0b 1f 4c 41 4e 2d 30 30 30 43 36 45 38 37  "....LAN-000C6E87"
>  f3d80  44 38 33 39 38 00 00 08 09 0e 00 00 00 01 12 10  "D8398..........."
>  f3d90  55 53 42 31 00 00 08 09 0f 00 00 00 01 12 10 55  "USB1...........U"
>  f3da0  53 42 32 00 00 08 09 10 00 00 00 01 0f 0d 50 53  "SB2...........PS"
>  f3db0  2f 32 20 4b 65 79 62 6f 61 72 64 00 00 08 09 11  "/2 Keyboard....."
>  f3dc0  00 00 00 01 0f 0e 50 53 2f 32 20 4d 6f 75 73 65  "......PS/2 Mouse"
>  f3dd0  00 00 08 09 12 00 00 00 01 05 05 50 61 72 61 6c  "...........Paral"
>  f3de0  6c 65 6c 20 50 6f 72 74 00 00 08 09 13 00 00 00  "lel Port........"
>  f3df0  01 08 08 53 65 72 69 61 6c 20 50 6f 72 74 20 31  "...Serial Port 1"
>  f3e00  00 00 08 09 14 00 00 00 01 08 08 53 65 72 69 61  "...........Seria"
>  f3e10  6c 20 50 6f 72 74 20 32 00 00 08 09 15 00 00 00  "l Port 2........"
>  f3e20  01 07 0c 4a 6f 79 73 74 69 63 6b 20 50 6f 72 74  "...Joystick Port"
>  f3e30  00 00 08 09 16 00 00 00 01 07 0b 4d 49 44 49 20  "...........MIDI "
>  f3e40  50 6f 72 74 00 00 08 09 17 00 00 00 01 1f 1c 56  "Port...........V"
>  f3e50  69 64 65 6f 20 50 6f 72 74 00 00 09 0d 18 00 01  "ideo Port......."
>  f3e60  06 05 03 03 01 00 06 01 50 43 49 20 31 00 00 09  "........PCI 1..."
>  f3e70  0d 19 00 01 06 05 04 03 02 00 06 01 50 43 49 20  "............PCI "
>  f3e80  32 00 00 09 0d 1a 00 01 06 05 04 03 03 00 06 01  "2..............."
>  f3e90  50 43 49 20 33 00 00 09 0d 1b 00 01 11 05 03 03  "PCI 3..........."
>  f3ea0  04 00 04 01 41 47 50 00 00 0b 05 1c 00 02 30 00  "....AGP.......0."
>  f3eb0  30 00 00 0d 16 1d 00 01 01 00 00 00 00 00 00 00  "0..............."
>  f3ec0  00 00 00 00 00 00 00 00 01 65 6e 7c 55 53 7c 69  ".........en|US|i"
>  f3ed0  73 6f 38 38 35 39 2d 31 00 00 0e 0e 1e 00 01 04  "so8859-1........"
>  f3ee0  04 00 07 08 00 07 09 00 43 70 75 20 4d 6f 64 75  "........Cpu Modu"
>  f3ef0  6c 65 00 00 0e 17 1f 00 01 10 20 00 11 21 00 14  "le........ ..!.."
>  f3f00  24 00 11 22 00 14 25 00 13 23 00 4d 65 6d 6f 72  "$.."..%..#.Memor"
>  f3f10  79 20 4d 6f 64 75 6c 65 20 53 65 74 00 00 10 0f  "y Module Set...."
>  f3f20  20 00 03 03 03 00 00 08 00 fe ff 02 00 00 00 11  " ..............."
>  f3f30  17 21 00 20 00 ff ff 48 00 40 00 00 01 09 01 01  ".!. ...H.@......"
>  f3f40  00 03 80 00 00 00 44 49 4d 4d 20 31 00 00 11 17  "......DIMM 1...."
>  f3f50  22 00 20 00 ff ff 48 00 40 00 00 01 09 02 01 00  "". ...H.@......."
>  f3f60  03 80 00 00 00 44 49 4d 4d 20 32 00 00 13 0f 23  ".....DIMM 2....#"
>  f3f70  00 00 00 00 00 ff ff 07 00 20 00 03 00 00 14 13  "......... ......"
>  f3f80  24 00 00 00 00 00 ff ff 03 00 21 00 23 00 01 00  "$.........!.#..."
>  f3f90  00 00 00 14 13 25 00 00 00 04 00 ff ff 07 00 22  ".....%.........""
>  f3fa0  00 23 00 02 00 00 00 00 20 0b 26 00 00 00 00 00  ".#...... .&....."
>  f3fb0  00 00 00 00 00 7f 04 27 00 00 00  ".......'..."
>----- SMBIOS Structure Table end -----
>  type 0x00 [0x0000]: 00 14 00 00 01 02 00 f0 03 03 80 da cb 7f 00 00 00 00 07 00
>       str1: "Award Software, Inc."
>       str2: "ASUS A7N266-VM ACPI BIOS Rev 1006"
>       str3: "04/29/2003"
>  type 0x01 [0x0001]: 01 19 01 00 01 02 03 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06
>       str1: "System Manufacturer"
>       str2: "System Name"
>       str3: "System Version"
>       str4: "SYS-1234567890"
>  type 0x02 [0x0002]: 02 08 02 00 01 02 03 04
>       str1: "ASUSTeK Computer INC."
>       str2: "A7N266VM"
>       str3: "REV 1.xx"
>       str4: "xxxxxxxxxxx"
>  type 0x03 [0x0003]: 03 11 03 00 01 07 02 03 04 03 03 03 02 00 00 00 02
>       str1: "Chassis Manufacture"
>       str2: "Chassis Version"
>       str3: "Chassis Serial Number"
>       str4: "Asset-1234567890"
>  type 0x04 [0x0004]: 04 20 04 00 01 03 01 02 81 06 00 00 ff fb 83 03 03 90 85 00 d0 07 d0 07 41 01 08 00 09 00 ff ff
>       str1: "SOCKET A"
>       str2: "AuthenticAMD"
>       str3: "AMD Athlon(TM) XP Processor"
>  type 0x05 [0x0005]: 05 14 05 00 06 04 03 03 09 1c 00 00 05 04 02 06 00 07 00 02
>  type 0x06 [0x0006]: 06 0c 06 00 01 01 00 00 05 08 08 00
>       str1: "DIMM 1"
>  type 0x06 [0x0007]: 06 0c 07 00 01 23 00 00 05 08 08 00
>       str1: "DIMM 2"
>  type 0x07 [0x0008]: 07 13 08 00 01 80 01 80 00 80 00 20 00 20 00 00 02 04 05
>       str1: "L1 Cache"
>  type 0x07 [0x0009]: 07 13 09 00 01 81 01 00 20 80 01 30 00 30 00 00 02 04 05
>       str1: "L2 Cache"
>  type 0x08 [0x000a]: 08 09 0a 00 01 16 00 00 00
>       str1: "PRIMARY IDE/HDD"
>  type 0x08 [0x000b]: 08 09 0b 00 01 16 00 00 00
>       str1: "SECONDARY IDE/HDD"
>  type 0x08 [0x000c]: 08 09 0c 00 01 17 00 00 00
>       str1: "FLOPPY"
>  type 0x08 [0x000d]: 08 09 0d 00 00 00 01 0b 1f
>       str1: "LAN-000C6E87D8398"
>  type 0x08 [0x000e]: 08 09 0e 00 00 00 01 12 10
>       str1: "USB1"
>  type 0x08 [0x000f]: 08 09 0f 00 00 00 01 12 10
>       str1: "USB2"
>  type 0x08 [0x0010]: 08 09 10 00 00 00 01 0f 0d
>       str1: "PS/2 Keyboard"
>  type 0x08 [0x0011]: 08 09 11 00 00 00 01 0f 0e
>       str1: "PS/2 Mouse"
>  type 0x08 [0x0012]: 08 09 12 00 00 00 01 05 05
>       str1: "Parallel Port"
>  type 0x08 [0x0013]: 08 09 13 00 00 00 01 08 08
>       str1: "Serial Port 1"
>  type 0x08 [0x0014]: 08 09 14 00 00 00 01 08 08
>       str1: "Serial Port 2"
>  type 0x08 [0x0015]: 08 09 15 00 00 00 01 07 0c
>       str1: "Joystick Port"
>  type 0x08 [0x0016]: 08 09 16 00 00 00 01 07 0b
>       str1: "MIDI Port"
>  type 0x08 [0x0017]: 08 09 17 00 00 00 01 1f 1c
>       str1: "Video Port"
>  type 0x09 [0x0018]: 09 0d 18 00 01 06 05 03 03 01 00 06 01
>       str1: "PCI 1"
>  type 0x09 [0x0019]: 09 0d 19 00 01 06 05 04 03 02 00 06 01
>       str1: "PCI 2"
>  type 0x09 [0x001a]: 09 0d 1a 00 01 06 05 04 03 03 00 06 01
>       str1: "PCI 3"
>  type 0x09 [0x001b]: 09 0d 1b 00 01 11 05 03 03 04 00 04 01
>       str1: "AGP"
>  type 0x0b [0x001c]: 0b 05 1c 00 02
>       str1: "0"
>       str2: "0"
>  type 0x0d [0x001d]: 0d 16 1d 00 01 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
>       str1: "en|US|iso8859-1"
>  type 0x0e [0x001e]: 0e 0e 1e 00 01 04 04 00 07 08 00 07 09 00
>       str1: "Cpu Module"
>  type 0x0e [0x001f]: 0e 17 1f 00 01 10 20 00 11 21 00 14 24 00 11 22 00 14 25 00 13 23 00
>       str1: "Memory Module Set"
>  type 0x10 [0x0020]: 10 0f 20 00 03 03 03 00 00 08 00 fe ff 02 00
>  type 0x11 [0x0021]: 11 17 21 00 20 00 ff ff 48 00 40 00 00 01 09 01 01 00 03 80 00 00 00
>       str1: "DIMM 1"
>  type 0x11 [0x0022]: 11 17 22 00 20 00 ff ff 48 00 40 00 00 01 09 02 01 00 03 80 00 00 00
>       str1: "DIMM 2"
>  type 0x13 [0x0023]: 13 0f 23 00 00 00 00 00 ff ff 07 00 20 00 03
>  type 0x14 [0x0024]: 14 13 24 00 00 00 00 00 ff ff 03 00 21 00 23 00 01 00 00
>  type 0x14 [0x0025]: 14 13 25 00 00 00 04 00 ff ff 07 00 22 00 23 00 02 00 00
>  type 0x20 [0x0026]: 20 0b 26 00 00 00 00 00 00 00 00
>  type 0x7f [0x0027]: 7f 04 27 00
>  smbios: stopped at end tag
>>> bios.3: smp
>/dev/mem[0x9fc00, 1024]: mmap(, 4096,,,, 0x9f000) ok
>----- BIOS data 0x00400 - 0x004ff -----
>  400  f8 03 f8 02 00 00 00 00 78 03 00 00 00 00 00 00  "........x......."
>  410  22 44 00 80 02 00 00 20 00 00 20 00 20 00 0d 1c  ""D..... .. . ..."
>  420  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  440  00 00 00 00 00 00 00 00 00 72 80 00 ff ff 00 00  ".........r......"
>  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  460  00 00 00 d4 03 29 30 03 00 00 c0 40 4c 53 11 00  ".....)0....@LS.."
>  470  00 00 00 00 00 02 00 00 14 14 14 14 01 01 01 01  "................"
>  480  1e 00 3e 00 2f 10 00 60 09 11 0b 01 50 01 00 00  "..>./..`....P..."
>  490  00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00  "................"
>  4a0  00 00 00 00 00 00 00 00 9b 67 00 c0 00 00 00 00  ".........g......"
>  4b0  00 00 4c 02 01 00 00 00 00 00 00 b5 df 01 00 00  "..L............."
>  4c0  00 00 00 02 00 f0 fe 1d 62 00 00 00 00 00 00 00  "........b......."
>  4d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>----- BIOS data end -----
>>> bios.4: vbe
>  klog: pci config type 1
>/dev/mem[0xc0000, 3]: mmap(, 4096,,,, 0xc0000) ok
>/dev/mem[0xc0000, 50176]: mmap(, 53248,,,, 0xc0000) ok
>/dev/mem[0x0, 4096]: mmap(, 4096,,,, 0x0) ok
>  vbe: int 10h points to c000:1140: fb e8 1c 7c e8 79 00 e8
>>> bios.4.1: vbe info
>>> bios.5: 32
>  bios32: valid SD header at 0xf21f0 (size 0x10, rev 0), SD at 0xf1920
>>> sys.1: cpu
>  vmware check: 0
>>> misc.9: kernel log
>----- kernel log -----
>  <5>Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Sep 13 14:56:15 UTC 2005
>  <6>BIOS-provided physical RAM map:
>  <4> BIOS-e820: 0000000000000000 - 0000000000080000 (usable)
>  <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  <4> BIOS-e820: 0000000000100000 - 000000001dfec000 (usable)
>  <4> BIOS-e820: 000000001dfec000 - 000000001dfef000 (ACPI data)
>  <4> BIOS-e820: 000000001dfef000 - 000000001dfff000 (reserved)
>  <4> BIOS-e820: 000000001dfff000 - 000000001e000000 (ACPI NVS)
>  <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>  <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>  <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>  <5>0MB HIGHMEM available.
>  <5>479MB LOWMEM available.
>  <7>On node 0 totalpages: 122860
>  <7>  DMA zone: 4096 pages, LIFO batch:1
>  <7>  Normal zone: 118764 pages, LIFO batch:31
>  <7>  HighMem zone: 0 pages, LIFO batch:1
>  <6>DMI 2.3 present.
>  <7>ACPI: RSDP (v000 ASUS                                  ) @ 0x000f8070
>  <7>ACPI: RSDT (v001 ASUS   A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x1dfec000
>  <7>ACPI: FADT (v001 ASUS   A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x1dfec100
>  <7>ACPI: BOOT (v001 ASUS   A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x1dfec040
>  <7>ACPI: MADT (v001 ASUS   A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x1dfec080
>  <7>ACPI: DSDT (v001   ASUS A7N266VM 0x00001000 MSFT 0x0100000b) @ 0x00000000
>  <6>ACPI: PM-Timer IO Port: 0xe408
>  <6>ACPI: local apic disabled
>  <4>Allocating PCI resources starting at 1e000000 (gap: 1e000000:e0c00000)
>  <4>Built 1 zonelists
>  <5>Kernel command line: root=/dev/hda2 vga=0x317 selinux=0 resume=/dev/hda1 splash=silent
>  <6>bootsplash: silent mode.
>  <6>Initializing CPU#0
>  <4>PID hash table entries: 2048 (order: 11, 32768 bytes)
>  <4>Detected 1995.131 MHz processor.
>  <6>Using pmtmr for high-res timesource
>  <4>Console: colour dummy device 80x25
>  <4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>  <4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>  <6>Memory: 481364k/491440k available (2028k kernel code, 9352k reserved, 700k data, 204k init, 0k highmem)
>  <4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>  <4>Calibrating delay using timer specific routine.. 3994.43 BogoMIPS (lpj=7988874)
>  <6>Security Framework v1.0.0 initialized
>  <6>SELinux:  Disabled at boot.
>  <4>Mount-cache hash table entries: 512
>  <7>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
>  <7>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
>  <4>CPU: CLK_CTL MSR was 60031223. Reprogramming to 20031223
>  <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>  <6>CPU: L2 Cache: 256K (64 bytes/line)
>  <7>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
>  <6>Intel machine check architecture supported.
>  <6>Intel machine check reporting enabled on CPU#0.
>  <6>mtrr: v2.0 (20020519)
>  <4>CPU: AMD Athlon(TM) XP 2400+ stepping 01
>  <6>Enabling fast FPU save and restore... done.
>  <6>Enabling unmasked SIMD FPU exception support... done.
>  <6>Checking 'hlt' instruction... OK.
>  <6>checking if image is initramfs... it is
>  <6>Freeing initrd memory: 1723k freed
>  <6>ACPI: Looking for DSDT in initrd... not found!
>  <4> not found!
>  <4>ACPI: setting ELCR to 0200 (from 0860)
>  <6>NET: Registered protocol family 16
>  <6>ACPI: bus type pci registered
>  <6>PCI: PCI BIOS revision 2.10 entry at 0xf1b20, last bus=2
>  <6>PCI: Using configuration type 1
>  <6>ACPI: Subsystem revision 20050408
>  <6>ACPI: Interpreter enabled
>  <6>ACPI: Using PIC for interrupt routing
>  <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 *6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 *6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKJ] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKK] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>  <4>ACPI: PCI Interrupt Link [LNKM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>  <6>ACPI: PCI Root Bridge [PCI0] (0000:00)
>  <4>PCI: Probing PCI hardware (bus 00)
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>  <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>  <7>Boot video device is 0000:02:00.0
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>  <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>  <6>Linux Plug and Play Support v0.97 (c) Adam Belay
>  <6>pnp: PnP ACPI init
>  <6>pnp: PnP ACPI: found 14 devices
>  <6>PCI: Using ACPI for IRQ routing
>  <6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>  <4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>  <6>pnp: 00:01: ioport range 0xe400-0xe4fe could not be reserved
>  <6>pnp: 00:01: ioport range 0xe4ff-0xe4ff has been reserved
>  <6>pnp: 00:01: ioport range 0xcf0-0xcf3 could not be reserved
>  <6>pnp: 00:0b: ioport range 0x370-0x371 has been reserved
>  <6>PCI: Bridge: 0000:00:08.0
>  <6>  IO window: a000-bfff
>  <6>  MEM window: eb800000-ecffffff
>  <6>  PREFETCH window: disabled.
>  <6>PCI: Bridge: 0000:00:1e.0
>  <6>  IO window: disabled.
>  <6>  MEM window: ea000000-eb7fffff
>  <6>  PREFETCH window: eff00000-f7ffffff
>  <7>PCI: Setting latency timer of device 0000:00:08.0 to 64
>  <7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>  <6>Simple Boot Flag at 0x3f set to 0x1
>  <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>  <5>apm: overridden by ACPI.
>  <6>audit: initializing netlink socket (disabled)
>  <4>audit(1131988768.488:1): initialized
>  <4>Total HugeTLB memory allocated, 0
>  <5>VFS: Disk quotas dquot_6.5.1
>  <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>  <6>Initializing Cryptographic API
>  <6>vesafb: framebuffer at 0xf0000000, mapped to 0xde880000, using 6144k, total 32768k
>  <6>vesafb: mode is 1024x768x16, linelength=2048, pages=0
>  <6>vesafb: protected mode interface info at c000:bf60
>  <6>vesafb: scrolling: redraw
>  <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>  <6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>  <4>Console: switching to colour frame buffer device 127x44
>  <6>fb0: VESA VGA frame buffer device
>  <6>isapnp: Scanning for PnP cards...
>  <6>isapnp: No Plug & Play device found
>  <6>Real Time Clock Driver v1.12
>  <6>PNP: No PS/2 controller found. Probing ports directly.
>  <6>serio: i8042 AUX port at 0x60,0x64 irq 12
>  <6>serio: i8042 KBD port at 0x60,0x64 irq 1
>  <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>  <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>  <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>  <6>io scheduler noop registered
>  <6>io scheduler anticipatory registered
>  <6>io scheduler deadline registered
>  <6>io scheduler cfq registered
>  <4>floppy0: no floppy controllers found
>  <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>  <6>loop: loaded (max 8 devices)
>  <6>mice: PS/2 mouse device common for all mice
>  <6>input: PC Speaker
>  <6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>  <6>md: bitmap version 3.38
>  <6>NET: Registered protocol family 2
>  <4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>  <4>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>  <4>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>  <6>TCP: Hash tables configured (established 16384 bind 16384)
>  <6>TCP reno registered
>  <6>NET: Registered protocol family 1
>  <4>Using IPI Shortcut mode
>  <4>ACPI wakeup devices: 
>  <4>PCI0 PCI1 UAR1 UAR2 USB0 USB1 MMAC 
>  <6>ACPI: (supports S0 S1 S3 S4 S5)
>  <6>Freeing unused kernel memory: 204k freed
>  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>  <6>NFORCE: IDE controller at PCI slot 0000:00:09.0
>  <4>    ACPI-0212: *** Warning: Device is not power manageable
>  <6>NFORCE: chipset revision 195
>  <6>NFORCE: not 100% native mode: will probe irqs later
>  <4>NFORCE: BIOS didn't set cable bits correctly. Enabling workaround.
>  <6>NFORCE: 0000:00:09.0 (rev c3) UDMA100 controller
>  <6>    ide0: BM-DMA at 0x9800-0x9807, BIOS settings: hda:DMA, hdb:DMA
>  <6>    ide1: BM-DMA at 0x9808-0x980f, BIOS settings: hdc:DMA, hdd:DMA
>  <7>Probing IDE interface ide0...
>  <4>hda: SAMSUNG SP1604N, ATA DISK drive
>  <4>hdb: ST380020A, ATA DISK drive
>  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>  <6>hda: max request size: 1024KiB
>  <6>hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
>  <6>hda: cache flushes supported
>  <6> hda: hda1 hda2
>  <6>hdb: max request size: 128KiB
>  <6>hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
>  <6>hdb: cache flushes not supported
>  <6> hdb: hdb1
>  <7>Probing IDE interface ide1...
>  <4>hdc: PHILIPS PBDV16LSP1, ATAPI CD/DVD-ROM drive
>  <4>hdd: PHILIPS DVDR1640P, ATAPI CD/DVD-ROM drive
>  <4>ide1 at 0x170-0x177,0x376 on irq 15
>  <6>ACPI: CPU0 (power states: C1[C1])
>  <6>hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>  <6>Uniform CD-ROM driver Revision: 3.20
>  <6>hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>  <4>Attempting manual resume
>  <3>swsusp: Suspend partition has wrong signature?
>  <5>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
>  <5>ReiserFS: hda2: using ordered data mode
>  <5>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>  <5>ReiserFS: hda2: checking transaction log (hda2)
>  <5>ReiserFS: hda2: Using r5 hash to sort names
>  <6>bootsplash: status on console 0 changed to on
>  <7>spurious 8259A interrupt: IRQ7.
>  <6>md: Autodetecting RAID arrays.
>  <6>md: autorun ...
>  <6>md: ... autorun DONE.
>  <6>Adding 971892k swap on /dev/hda1.  Priority:42 extents:1
>  <6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>  <6>NTFS driver 2.1.23 [Flags: R/W MODULE].
>  <6>NTFS volume version 3.1.
>  <3>Buffer I/O error on device sda, logical block 321672960
>  <3>scsi8 (0:0): rejecting I/O to dead device
>  <3>Buffer I/O error on device sda, logical block 321672952
>  <3>scsi8 (0:0): rejecting I/O to dead device
>  <3>scsi8 (0:0): rejecting I/O to dead device
>  <3>scsi8 (0:0): rejecting I/O to dead device
>  <3>scsi8 (0:0): rejecting I/O to dead device
>  <3>scsi8 (0:0): rejecting I/O to dead device
>  <3>scsi8 (0:0): rejecting I/O to dead device
>  <3>scsi8 (0:0): rejecting I/O to dead device
>  <3>scsi8 (0:0): rejecting I/O to dead device
>  <6>usb 5-4: new high speed USB device using ehci_hcd and address 20
>  <3>usb 5-4: device descriptor read/64, error -71
>  <3>usb 5-4: device descriptor read/64, error -71
>  <6>usb 5-4: new high speed USB device using ehci_hcd and address 21
>  <6>scsi9 : SCSI emulation for USB Mass Storage devices
>  <7>usb-storage: device found at 21
>  <7>usb-storage: waiting for device to settle before scanning
>  <5>  Vendor: HDS72251  Model: 6VLAT20           Rev: V34O
>  <5>  Type:   Direct-Access                      ANSI SCSI revision: 00
>  <5>SCSI device sda: 321672961 512-byte hdwr sectors (164697 MB)
>  <3>sda: assuming drive cache: write through
>  <5>SCSI device sda: 321672961 512-byte hdwr sectors (164697 MB)
>  <3>sda: assuming drive cache: write through
>  <6> sda: sda1
>  <5>Attached scsi disk sda at scsi9, channel 0, id 0, lun 0
>  <5>Attached scsi generic sg0 at scsi9, channel 0, id 0, lun 0,  type 0
>  <7>usb-storage: device scan complete
>  <6>usb 5-4: reset high speed USB device using ehci_hcd and address 21
>  <3>usb 5-4: failed to restore interface 0 altsetting 0 (error=-110)
>  <6>usb 5-4: USB disconnect, address 21
>  <6>SCSI error : <9 0 0 0> return code = 0x10000
>  <4>end_request: I/O error, dev sda, sector 321672960
>  <4>printk: 71 messages suppressed.
>  <3>Buffer I/O error on device sda, logical block 321672960
>  <3>scsi9 (0:0): rejecting I/O to dead device
>  <3>Buffer I/O error on device sda, logical block 321672960
>  <3>scsi9 (0:0): rejecting I/O to dead device
>  <3>scsi9 (0:0): rejecting I/O to dead device
>  <3>scsi9 (0:0): rejecting I/O to dead device
>  <3>scsi9 (0:0): rejecting I/O to dead device
>  <3>scsi9 (0:0): rejecting I/O to dead device
>  <3>scsi9 (0:0): rejecting I/O to dead device
>  <3>scsi9 (0:0): rejecting I/O to dead device
>  <3>scsi9 (0:0): rejecting I/O to dead device
>  <3>scsi9 (0:0): rejecting I/O to dead device
>  <6>usb 5-4: new high speed USB device using ehci_hcd and address 22
>  <3>usb 5-4: device descriptor read/64, error -71
>  <3>usb 5-4: device descriptor read/64, error -71
>  <6>usb 5-4: new high speed USB device using ehci_hcd and address 23
>  <6>scsi10 : SCSI emulation for USB Mass Storage devices
>  <7>usb-storage: device found at 23
>  <7>usb-storage: waiting for device to settle before scanning
>  <5>  Vendor: HDS72251  Model: 6VLAT20           Rev: V34O
>  <5>  Type:   Direct-Access                      ANSI SCSI revision: 00
>  <5>SCSI device sda: 321672961 512-byte hdwr sectors (164697 MB)
>  <3>sda: assuming drive cache: write through
>  <5>SCSI device sda: 321672961 512-byte hdwr sectors (164697 MB)
>  <3>sda: assuming drive cache: write through
>  <6> sda: sda1
>  <5>Attached scsi disk sda at scsi10, channel 0, id 0, lun 0
>  <5>Attached scsi generic sg0 at scsi10, channel 0, id 0, lun 0,  type 0
>  <7>usb-storage: device scan complete
>  <6>usb 5-4: reset high speed USB device using ehci_hcd and address 23
>  <3>usb 5-4: failed to restore interface 0 altsetting 0 (error=-110)
>  <6>usb 5-4: USB disconnect, address 23
>  <6>SCSI error : <10 0 0 0> return code = 0x10000
>  <4>end_request: I/O error, dev sda, sector 321672960
>  <4>printk: 72 messages suppressed.
>  <3>Buffer I/O error on device sda, logical block 321672960
>  <3>scsi10 (0:0): rejecting I/O to dead device
>  <3>Buffer I/O error on device sda, logical block 321672960
>  <3>scsi10 (0:0): rejecting I/O to dead device
>  <3>Buffer I/O error on device sda, logical block 321672952
>  <3>scsi10 (0:0): rejecting I/O to dead device
>  <3>scsi10 (0:0): rejecting I/O to dead device
>  <3>scsi10 (0:0): rejecting I/O to dead device
>  <3>scsi10 (0:0): rejecting I/O to dead device
>  <3>scsi10 (0:0): rejecting I/O to dead device
>  <3>scsi10 (0:0): rejecting I/O to dead device
>  <3>scsi10 (0:0): rejecting I/O to dead device
>  <3>scsi10 (0:0): rejecting I/O to dead device
>  <6>usb 5-4: new high speed USB device using ehci_hcd and address 24
>  <3>usb 5-4: device descriptor read/64, error -71
>  <3>usb 5-4: device descriptor read/64, error -71
>  <6>usb 5-4: new high speed USB device using ehci_hcd and address 25
>  <6>scsi11 : SCSI emulation for USB Mass Storage devices
>  <7>usb-storage: device found at 25
>  <7>usb-storage: waiting for device to settle before scanning
>  <5>  Vendor: HDS72251  Model: 6VLAT20           Rev: V34O
>  <5>  Type:   Direct-Access                      ANSI SCSI revision: 00
>  <5>SCSI device sda: 321672961 512-byte hdwr sectors (164697 MB)
>  <3>sda: assuming drive cache: write through
>  <5>SCSI device sda: 321672961 512-byte hdwr sectors (164697 MB)
>  <3>sda: assuming drive cache: write through
>  <6> sda: sda1
>  <5>Attached scsi disk sda at scsi11, channel 0, id 0, lun 0
>  <5>Attached scsi generic sg0 at scsi11, channel 0, id 0, lun 0,  type 0
>  <7>usb-storage: device scan complete
>  <6>usb 5-4: reset high speed USB device using ehci_hcd and address 25
>  <3>usb 5-4: failed to restore interface 0 altsetting 0 (error=-110)
>  <6>usb 5-4: USB disconnect, address 25
>  <6>SCSI error : <11 0 0 0> return code = 0x10000
>  <4>end_request: I/O error, dev sda, sector 321672960
>  <4>printk: 71 messages suppressed.
>  <3>Buffer I/O error on device sda, logical block 321672960
>  <3>scsi11 (0:0): rejecting I/O to dead device
>  <3>Buffer I/O error on device sda, logical block 321672960
>  <3>scsi11 (0:0): rejecting I/O to dead device
>  <3>scsi11 (0:0): rejecting I/O to dead device
>  <3>scsi11 (0:0): rejecting I/O to dead device
>  <3>scsi11 (0:0): rejecting I/O to dead device
>  <3>scsi11 (0:0): rejecting I/O to dead device
>  <3>scsi11 (0:0): rejecting I/O to dead device
>  <3>scsi11 (0:0): rejecting I/O to dead device
>  <3>scsi11 (0:0): rejecting I/O to dead device
>  <3>scsi11 (0:0): rejecting I/O to dead device
>  <6>usb 5-4: new high speed USB device using ehci_hcd and address 26
>  <3>usb 5-4: device descriptor read/64, error -71
>  <3>usb 5-4: device descriptor read/64, error -71
>  <6>usb 5-4: new high speed USB device using ehci_hcd and address 27
>  <6>scsi12 : SCSI emulation for USB Mass Storage devices
>  <7>usb-storage: device found at 27
>  <7>usb-storage: waiting for device to settle before scanning
>  <5>  Vendor: HDS72251  Model: 6VLAT20           Rev: V34O
>  <5>  Type:   Direct-Access                      ANSI SCSI revision: 00
>  <5>SCSI device sda: 321672961 512-byte hdwr sectors (164697 MB)
>  <3>sda: assuming drive cache: write through
>  <5>SCSI device sda: 321672961 512-byte hdwr sectors (164697 MB)
>  <3>sda: assuming drive cache: write through
>  <6> sda: sda1
>  <5>Attached scsi disk sda at scsi12, channel 0, id 0, lun 0
>  <5>Attached scsi generic sg0 at scsi12, channel 0, id 0, lun 0,  type 0
>  <7>usb-storage: device scan complete
>  <6>usb 5-4: reset high speed USB device using ehci_hcd and address 27
>  <3>usb 5-4: failed to restore interface 0 altsetting 0 (error=-110)
>  <6>usb 5-4: USB disconnect, address 27
>  <6>SCSI error : <12 0 0 0> return code = 0x10000
>  <4>end_request: I/O error, dev sda, sector 321672960
>  <4>printk: 72 messages suppressed.
>  <3>Buffer I/O error on device sda, logical block 321672960
>  <3>scsi12 (0:0): rejecting I/O to dead device
>  <3>Buffer I/O error on device sda, logical block 321672960
>  <3>scsi12 (0:0): rejecting I/O to dead device
>  <3>scsi12 (0:0): rejecting I/O to dead device
>  <3>scsi12 (0:0): rejecting I/O to dead device
>  <3>scsi12 (0:0): rejecting I/O to dead device
>  <3>scsi12 (0:0): rejecting I/O to dead device
>  <3>scsi12 (0:0): rejecting I/O to dead device
>  <3>scsi12 (0:0): rejecting I/O to dead device
>  <3>scsi12 (0:0): rejecting I/O to dead device
>  <3>scsi12 (0:0): rejecting I/O to dead device
>  <6>usb 5-4: new high speed USB device using ehci_hcd and address 28
>  <3>usb 5-4: device descriptor read/64, error -71
>  <3>usb 5-4: device descriptor read/64, error -71
>  <6>usb 5-4: new high speed USB device using ehci_hcd and address 29
>  <6>scsi13 : SCSI emulation for USB Mass Storage devices
>  <7>usb-storage: device found at 29
>  <7>usb-storage: waiting for device to settle before scanning
>----- kernel log end -----
>>> misc.1: misc data
>>> misc.1.1: open serial
>>> misc.1.2: open parallel
>----- exec: "/sbin/rmmod lp" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport " -----
>----- return code: ? -----
>>> misc.2.1: io
>>> misc.2.2: dma
>>> misc.2.3: irq
>----- /proc/ioports -----
>  0000-001f : dma1
>  0020-0021 : pic1
>  0040-0043 : timer0
>  0050-0053 : timer1
>  0060-006f : keyboard
>  0070-0077 : rtc
>  0080-008f : dma page reg
>  00a0-00a1 : pic2
>  00c0-00df : dma2
>  00f0-00ff : fpu
>  0170-0177 : ide1
>  01f0-01f7 : ide0
>  02f8-02ff : serial
>  0370-0371 : pnp 00:0b
>  0376-0376 : ide1
>  0378-037a : parport0
>  03c0-03df : vesafb
>  03f6-03f6 : ide0
>  03f8-03ff : serial
>  0778-077a : parport0
>  0cf0-0cf1 : PM1a_CNT_BLK
>  0cf8-0cff : PCI conf1
>  5000-500f : 0000:00:01.1
>  5100-511f : 0000:00:01.1
>  5500-550f : 0000:00:01.1
>    5500-550f : amd756-smbus
>  9800-980f : 0000:00:09.0
>    9800-9807 : ide0
>    9808-980f : ide1
>  a000-bfff : PCI Bus #01
>    a800-a8ff : 0000:01:08.0
>      a800-a8ff : 8139too
>    b000-b07f : 0000:01:07.3
>    b400-b41f : 0000:01:07.1
>      b400-b41f : uhci_hcd
>    b800-b81f : 0000:01:07.0
>      b800-b81f : uhci_hcd
>  d800-d807 : 0000:00:04.0
>    d800-d807 : forcedeth
>  e000-e07f : 0000:00:06.0
>    e000-e07f : NVidia nForce
>  e100-e1ff : 0000:00:06.0
>    e100-e1ff : NVidia nForce
>  e400-e4fe : motherboard
>    e400-e403 : PM1a_EVT_BLK
>    e404-e405 : PM1b_CNT_BLK
>    e408-e40b : PM_TMR
>    e420-e423 : GPE0_BLK
>    e4a0-e4a7 : GPE1_BLK
>  e4ff-e4ff : motherboard
>    e4ff-e4ff : pnp 00:01
>----- /proc/ioports end -----
>----- /proc/interrupts -----
>    0:     134524          XT-PIC  timer
>    2:          0          XT-PIC  cascade
>    3:         20          XT-PIC  serial
>    4:         18          XT-PIC  serial
>    5:      39508          XT-PIC  uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5, ohci1394, eth1
>    6:       9472          XT-PIC  ohci_hcd:usb1, ohci_hcd:usb2
>    7:         10          XT-PIC  parport0
>    8:          2          XT-PIC  rtc
>    9:          0          XT-PIC  acpi
>   11:      34105          XT-PIC  NVidia nForce, nvidia
>   14:      24279          XT-PIC  ide0
>   15:       8997          XT-PIC  ide1
>  NMI:          0 
>  LOC:          0 
>  ERR:          1
>  MIS:          0
>----- /proc/interrupts end -----
>----- /proc/dma -----
>   3: parport0
>   4: cascade
>----- /proc/dma end -----
>>> misc.3: FPU
>>> misc.3.1: DMA
>>> misc.3.2: PIC
>>> misc.3.3: timer
>>> misc.3.4: RTC
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: AuthenticAMD
>  cpu family	: 6
>  model		: 8
>  model name	: AMD Athlon(TM) XP 2400+
>  stepping	: 1
>  cpu MHz		: 1995.131
>  cache size	: 256 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 1
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
>  bogomips	: 3994.43
>  
>----- /proc/cpuinfo end -----
>>> memory.1: main memory size
>  kcore mem:  0x1dfec000
>  klog mem 0: 0x1d615000
>  klog mem 1: 0x0
>  klog mem:   0x1d615000
> -- <4> BIOS-e820: 0000000000000000 - 0000000000080000 (usable)
> -- <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> -- <4> BIOS-e820: 0000000000100000 - 000000001dfec000 (usable)
> -- <4> BIOS-e820: 000000001dfec000 - 000000001dfef000 (ACPI data)
> -- <4> BIOS-e820: 000000001dfef000 - 000000001dfff000 (reserved)
> -- <4> BIOS-e820: 000000001dfff000 - 000000001e000000 (ACPI NVS)
> -- <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> -- <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> -- <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> -- <5>0MB HIGHMEM available.
>  bios mem:   0x1df6c000
>  meminfo:    0x1d82c000
>>> pci.1: sysfs drivers
>----- sysfs driver list (id 0x5172276b3f4a3498) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:09.0/ide1/1.0
>       ide-cdrom: /devices/pci0000:00/0000:00:09.0/ide1/1.1
>        ide-disk: /devices/pci0000:00/0000:00:09.0/ide0/0.0
>        ide-disk: /devices/pci0000:00/0000:00:09.0/ide0/0.1
>         8139too: /devices/pci0000:00/0000:00:08.0/0000:01:08.0
>         AMD_IDE: /devices/pci0000:00/0000:00:09.0
>       Intel ICH: /devices/pci0000:00/0000:00:06.0
>  agpgart-nvidia: /devices/pci0000:00/0000:00:00.0
>    amd756_smbus: /devices/pci0000:00/0000:00:01.1
>        ehci_hcd: /devices/pci0000:00/0000:00:08.0/0000:01:07.2
>       forcedeth: /devices/pci0000:00/0000:00:04.0
>          nvidia: /devices/pci0000:00/0000:00:1e.0/0000:02:00.0
>        ohci1394: /devices/pci0000:00/0000:00:08.0/0000:01:07.3
>        ohci_hcd: /devices/pci0000:00/0000:00:02.0
>        ohci_hcd: /devices/pci0000:00/0000:00:03.0
>        uhci_hcd: /devices/pci0000:00/0000:00:08.0/0000:01:07.0
>        uhci_hcd: /devices/pci0000:00/0000:00:08.0/0000:01:07.1
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>      parport_pc: /devices/pnp0/00:08
>          serial: /devices/pnp0/00:09
>          serial: /devices/pnp0/00:0a
>          system: /devices/pnp0/00:00
>          system: /devices/pnp0/00:01
>          system: /devices/pnp0/00:02
>          system: /devices/pnp0/00:03
>          system: /devices/pnp0/00:0b
>              sd: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0/host13/target13:0:0/13:0:0:0
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:02.0/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0
>             hub: /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-0:1.0
>             hub: /devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4/4-0:1.0
>             hub: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-0:1.0
>             hub: /module/usbcore
>     usb-storage: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0
>     usb-storage: /module/usb_storage
>           usbfs: /module/usbcore
>          usbhid: /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0
>          usbhid: /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.1
>          usbhid: /module/usbhid
>             usb: /devices/pci0000:00/0000:00:02.0/usb1/1-1
>             usb: /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2
>             usb: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4
>             usb: /devices/pci0000:00/0000:00:02.0/usb1
>             usb: /devices/pci0000:00/0000:00:03.0/usb2
>             usb: /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3
>             usb: /devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4
>             usb: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5
>             usb: /module/usbcore
>----- sysfs driver list end -----
>>> pci.2: get sysfs pci data
>  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:00.0
>    modalias = "pci:v000010DEd000001A4sv00000000sd00000000bc06sc00i00
>"
>    class = 0x60000
>    vendor = 0x10de
>    device = 0x1a4
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    res[0] = 0xf8000000 0xfbffffff 0x1208
>    config[64]
>  pci device: name = 0000:00:00.1, bus_id = 0000:00:00.1, bus = pci
>    path = /devices/pci0000:00/0000:00:00.1
>    modalias = "pci:v000010DEd000001ACsv000010DEsd00000C11bc05sc00i00
>"
>    class = 0x50000
>    vendor = 0x10de
>    device = 0x1ac
>    subvendor = 0x10de
>    subdevice = 0xc11
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:00.2, bus_id = 0000:00:00.2, bus = pci
>    path = /devices/pci0000:00/0000:00:00.2
>    modalias = "pci:v000010DEd000001ADsv000010DEsd00000C11bc05sc00i00
>"
>    class = 0x50000
>    vendor = 0x10de
>    device = 0x1ad
>    subvendor = 0x10de
>    subdevice = 0xc11
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:00.3, bus_id = 0000:00:00.3, bus = pci
>    path = /devices/pci0000:00/0000:00:00.3
>    modalias = "pci:v000010DEd000001AAsv000010DEsd00000C11bc05sc00i00
>"
>    class = 0x50000
>    vendor = 0x10de
>    device = 0x1aa
>    subvendor = 0x10de
>    subdevice = 0xc11
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci
>    path = /devices/pci0000:00/0000:00:01.0
>    modalias = "pci:v000010DEd000001B2sv000010DEsd00000C11bc06sc01i00
>"
>    class = 0x60100
>    vendor = 0x10de
>    device = 0x1b2
>    subvendor = 0x10de
>    subdevice = 0xc11
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:01.1, bus_id = 0000:00:01.1, bus = pci
>    path = /devices/pci0000:00/0000:00:01.1
>    modalias = "pci:v000010DEd000001B4sv000010DEsd00000C11bc0Csc05i00
>"
>    class = 0xc0500
>    vendor = 0x10de
>    device = 0x1b4
>    subvendor = 0x10de
>    subdevice = 0xc11
>    irq = 5
>    res[0] = 0x5000 0x500f 0x101
>    res[1] = 0x5500 0x550f 0x101
>    res[2] = 0x5100 0x511f 0x101
>    config[64]
>  pci device: name = 0000:00:02.0, bus_id = 0000:00:02.0, bus = pci
>    path = /devices/pci0000:00/0000:00:02.0
>    modalias = "pci:v000010DEd000001C2sv000010DEsd00000C11bc0Csc03i10
>"
>    class = 0xc0310
>    vendor = 0x10de
>    device = 0x1c2
>    subvendor = 0x10de
>    subdevice = 0xc11
>    irq = 6
>    res[0] = 0xef000000 0xef000fff 0x200
>    config[64]
>  pci device: name = 0000:00:03.0, bus_id = 0000:00:03.0, bus = pci
>    path = /devices/pci0000:00/0000:00:03.0
>    modalias = "pci:v000010DEd000001C2sv000010DEsd00000C11bc0Csc03i10
>"
>    class = 0xc0310
>    vendor = 0x10de
>    device = 0x1c2
>    subvendor = 0x10de
>    subdevice = 0xc11
>    irq = 6
>    res[0] = 0xee800000 0xee800fff 0x200
>    config[64]
>  pci device: name = 0000:00:04.0, bus_id = 0000:00:04.0, bus = pci
>    path = /devices/pci0000:00/0000:00:04.0
>    modalias = "pci:v000010DEd000001C3sv00001043sd00000C11bc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x10de
>    device = 0x1c3
>    subvendor = 0x1043
>    subdevice = 0xc11
>    irq = 6
>    res[0] = 0xee000000 0xee0003ff 0x200
>    res[1] = 0xd800 0xd807 0x101
>    config[64]
>  pci device: name = 0000:00:05.0, bus_id = 0000:00:05.0, bus = pci
>    path = /devices/pci0000:00/0000:00:05.0
>    modalias = "pci:v000010DEd000001B0sv00001043sd00000C11bc04sc01i00
>"
>    class = 0x40100
>    vendor = 0x10de
>    device = 0x1b0
>    subvendor = 0x1043
>    subdevice = 0xc11
>    irq = 5
>    res[0] = 0xed800000 0xed87ffff 0x200
>    config[64]
>  pci device: name = 0000:00:06.0, bus_id = 0000:00:06.0, bus = pci
>    path = /devices/pci0000:00/0000:00:06.0
>    modalias = "pci:v000010DEd000001B1sv00001043sd00008384bc04sc01i00
>"
>    class = 0x40100
>    vendor = 0x10de
>    device = 0x1b1
>    subvendor = 0x1043
>    subdevice = 0x8384
>    irq = 11
>    res[0] = 0xe100 0xe1ff 0x101
>    res[1] = 0xe000 0xe07f 0x101
>    res[2] = 0xed000000 0xed000fff 0x200
>    config[64]
>  pci device: name = 0000:00:08.0, bus_id = 0000:00:08.0, bus = pci
>    path = /devices/pci0000:00/0000:00:08.0
>    modalias = "pci:v000010DEd000001B8sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x10de
>    device = 0x1b8
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:00:09.0, bus_id = 0000:00:09.0, bus = pci
>    path = /devices/pci0000:00/0000:00:09.0
>    modalias = "pci:v000010DEd000001BCsv000010DEsd00000C11bc01sc01i8a
>"
>    class = 0x1018a
>    vendor = 0x10de
>    device = 0x1bc
>    subvendor = 0x10de
>    subdevice = 0xc11
>    irq = 0
>    res[4] = 0x9800 0x980f 0x101
>    config[64]
>  pci device: name = 0000:00:1e.0, bus_id = 0000:00:1e.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0
>    modalias = "pci:v000010DEd000001B7sv00000000sd00000000bc06sc04i00
>"
>    class = 0x60400
>    vendor = 0x10de
>    device = 0x1b7
>    subvendor = 0x0
>    subdevice = 0x0
>    irq = 0
>    config[64]
>  pci device: name = 0000:01:07.0, bus_id = 0000:01:07.0, bus = pci
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.0
>    modalias = "pci:v00001106d00003038sv00001106sd00003038bc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x1106
>    device = 0x3038
>    subvendor = 0x1106
>    subdevice = 0x3038
>    irq = 5
>    res[4] = 0xb800 0xb81f 0x101
>    config[64]
>  pci device: name = 0000:01:07.1, bus_id = 0000:01:07.1, bus = pci
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.1
>    modalias = "pci:v00001106d00003038sv00001106sd00003038bc0Csc03i00
>"
>    class = 0xc0300
>    vendor = 0x1106
>    device = 0x3038
>    subvendor = 0x1106
>    subdevice = 0x3038
>    irq = 5
>    res[4] = 0xb400 0xb41f 0x101
>    config[64]
>  pci device: name = 0000:01:07.2, bus_id = 0000:01:07.2, bus = pci
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.2
>    modalias = "pci:v00001106d00003104sv00001106sd00003104bc0Csc03i20
>"
>    class = 0xc0320
>    vendor = 0x1106
>    device = 0x3104
>    subvendor = 0x1106
>    subdevice = 0x3104
>    irq = 5
>    res[0] = 0xec800000 0xec8000ff 0x200
>    config[64]
>  pci device: name = 0000:01:07.3, bus_id = 0000:01:07.3, bus = pci
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.3
>    modalias = "pci:v00001106d00003044sv00001106sd00003044bc0Csc00i10
>"
>    class = 0xc0010
>    vendor = 0x1106
>    device = 0x3044
>    subvendor = 0x1106
>    subdevice = 0x3044
>    irq = 5
>    res[0] = 0xec000000 0xec0007ff 0x200
>    res[1] = 0xb000 0xb07f 0x101
>    config[64]
>  pci device: name = 0000:01:08.0, bus_id = 0000:01:08.0, bus = pci
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:08.0
>    modalias = "pci:v000010ECd00008139sv000010ECsd00008139bc02sc00i00
>"
>    class = 0x20000
>    vendor = 0x10ec
>    device = 0x8139
>    subvendor = 0x10ec
>    subdevice = 0x8139
>    irq = 5
>    res[0] = 0xa800 0xa8ff 0x101
>    res[1] = 0xeb800000 0xeb8000ff 0x200
>    config[64]
>  pci device: name = 0000:02:00.0, bus_id = 0000:02:00.0, bus = pci
>    path = /devices/pci0000:00/0000:00:1e.0/0000:02:00.0
>    modalias = "pci:v000010DEd000001A0sv000010DEsd00000C11bc03sc00i00
>"
>    class = 0x30000
>    vendor = 0x10de
>    device = 0x1a0
>    subvendor = 0x10de
>    subdevice = 0xc11
>    irq = 11
>    res[0] = 0xea000000 0xeaffffff 0x200
>    res[1] = 0xf0000000 0xf7ffffff 0x1208
>    res[6] = 0xefff0000 0xefffffff 0x7202
>    config[64]
>---------- PCI raw data ----------
>bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 10de:01a4:0000:0000:b2
>class 06, sub_class 00 prog_if 00, hdr 0, flags <agp>, irq 0
>  addr0 f8000000, size 04000000
>  00: de 10 a4 01 06 00 b0 00 b2 00 00 06 00 00 80 00  "................"
>  10: 08 00 00 f8 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00  "....@..........."
>  40: 02 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ".`.............."
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 08 00  ".."
>
>bus 00, slot 00, func 1, vend:dev:s_vend:s_dev:rev 10de:01ac:10de:0c11:b2
>class 05, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: de 10 ac 01 00 00 20 00 b2 00 00 05 00 00 80 00  "...... ........."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 11 0c  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 00, func 2, vend:dev:s_vend:s_dev:rev 10de:01ad:10de:0c11:b2
>class 05, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: de 10 ad 01 00 00 20 00 b2 00 00 05 00 00 80 00  "...... ........."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 11 0c  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 00, func 3, vend:dev:s_vend:s_dev:rev 10de:01aa:10de:0c11:b2
>class 05, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
>  00: de 10 aa 01 00 00 20 00 b2 00 00 05 00 00 80 00  "...... ........."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 11 0c  "................"
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>
>bus 00, slot 01, func 0, vend:dev:s_vend:s_dev:rev 10de:01b2:10de:0c11:c3
>class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0
>  00: de 10 b2 01 0f 00 b0 00 c3 00 01 06 00 00 80 00  "................"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 11 0c  "................"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 00 00  "....P..........."
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 08 00  ".."
>
>bus 00, slot 01, func 1, vend:dev:s_vend:s_dev:rev 10de:01b4:10de:0c11:c1
>class 0c, sub_class 05 prog_if 00, hdr 0, flags <pm>, irq 5
>  addr0 00005000, size 00000010
>  addr1 00005500, size 00000010
>  addr2 00005100, size 00000020
>  00: de 10 b4 01 01 00 b0 00 c1 00 05 0c 00 00 80 00  "................"
>  10: 01 50 00 00 01 55 00 00 01 51 00 00 00 00 00 00  ".P...U...Q......"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 11 0c  "................"
>  30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01  "....D..........."
>  40: 00 00 00 00 01 00  "......"
>
>bus 00, slot 02, func 0, vend:dev:s_vend:s_dev:rev 10de:01c2:10de:0c11:c3
>class 0c, sub_class 03 prog_if 10, hdr 0, flags <pm>, irq 6
>  addr0 ef000000, size 00001000
>  00: de 10 c2 01 06 00 b0 00 c3 10 03 0c 00 00 00 00  "................"
>  10: 00 00 00 ef 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 11 0c  "................"
>  30: 00 00 00 00 44 00 00 00 00 00 00 00 06 01 03 01  "....D..........."
>  40: 00 00 00 00 01 00  "......"
>
>bus 00, slot 03, func 0, vend:dev:s_vend:s_dev:rev 10de:01c2:10de:0c11:c3
>class 0c, sub_class 03 prog_if 10, hdr 0, flags <pm>, irq 6
>  addr0 ee800000, size 00001000
>  00: de 10 c2 01 06 00 b0 00 c3 10 03 0c 00 00 00 00  "................"
>  10: 00 00 80 ee 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 11 0c  "................"
>  30: 00 00 00 00 44 00 00 00 00 00 00 00 06 01 03 01  "....D..........."
>  40: 00 00 00 00 01 00  "......"
>
>bus 00, slot 04, func 0, vend:dev:s_vend:s_dev:rev 10de:01c3:1043:0c11:c2
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 6
>  addr0 ee000000, size 00000400
>  addr1 0000d800, size 00000008
>  00: de 10 c3 01 07 00 b0 00 c2 00 00 02 00 00 00 00  "................"
>  10: 00 00 00 ee 01 d8 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c  "............C..."
>  30: 00 00 00 00 44 00 00 00 00 00 00 00 06 01 01 14  "....D..........."
>  40: 00 00 00 00 01 00  "......"
>
>bus 00, slot 05, func 0, vend:dev:s_vend:s_dev:rev 10de:01b0:1043:0c11:c2
>class 04, sub_class 01 prog_if 00, hdr 0, flags <pm>, irq 5
>  addr0 ed800000, size 00080000
>  00: de 10 b0 01 06 00 b0 00 c2 00 01 04 00 00 00 00  "................"
>  10: 00 00 80 ed 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 11 0c  "............C..."
>  30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 01 0c  "....D..........."
>  40: 00 00 00 00 01 00  "......"
>
>bus 00, slot 06, func 0, vend:dev:s_vend:s_dev:rev 10de:01b1:1043:8384:c2
>class 04, sub_class 01 prog_if 00, hdr 0, flags <pm>, irq 11
>  addr0 0000e100, size 00000100
>  addr1 0000e000, size 00000080
>  addr2 ed000000, size 00001000
>  00: de 10 b1 01 07 00 b0 00 c2 00 01 04 00 00 80 00  "................"
>  10: 01 e1 00 00 01 e0 00 00 00 00 00 ed 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 84 83  "............C..."
>  30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 05  "....D..........."
>  40: 00 00 00 00 01 00  "......"
>
>bus 00->01, slot 08, func 0, vend:dev:s_vend:s_dev:rev 10de:01b8:0000:0000:c2
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: de 10 b8 01 07 00 a0 00 c2 00 04 06 00 00 01 00  "................"
>  10: 00 00 00 00 00 00 00 00 00 01 01 00 a0 b0 80 a2  "................"
>  20: 80 eb f0 ec f0 ff 00 00 00 00 00 00 00 00 00 00  "................"
>  30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00  "....D..........."
>
>bus 00, slot 09, func 0, vend:dev:s_vend:s_dev:rev 10de:01bc:10de:0c11:c3
>class 01, sub_class 01 prog_if 8a, hdr 0, flags <pm>, irq 0
>  addr4 00009800, size 00000010
>  00: de 10 bc 01 05 00 b0 00 c3 8a 01 01 00 00 00 00  "................"
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 98 00 00 00 00 00 00 00 00 00 00 de 10 11 0c  "................"
>  30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01  "....D..........."
>  40: 00 00 00 00 01 00  "......"
>
>bus 00->02, slot 1e, func 0, vend:dev:s_vend:s_dev:rev 10de:01b7:0000:0000:b2
>class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
>  00: de 10 b7 01 07 00 20 02 b2 00 04 06 00 40 01 00  "...... ......@.."
>  10: 00 00 00 00 00 00 00 00 00 02 02 40 f0 00 20 22  "...........@.. ""
>  20: 00 ea 70 eb f0 ef f0 f7 00 00 00 00 00 00 00 00  "..p............."
>  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00  "................"
>
>bus 01, slot 07, func 0, vend:dev:s_vend:s_dev:rev 1106:3038:1106:3038:61
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <pm>, irq 5
>  addr4 0000b800, size 00000020
>  00: 06 11 38 30 17 00 10 02 61 00 03 0c 08 40 80 00  "..80....a....@.."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 b8 00 00 00 00 00 00 00 00 00 00 06 11 38 30  "..............80"
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 01 00  ".."
>
>bus 01, slot 07, func 1, vend:dev:s_vend:s_dev:rev 1106:3038:1106:3038:61
>class 0c, sub_class 03 prog_if 00, hdr 0, flags <pm>, irq 5
>  addr4 0000b400, size 00000020
>  00: 06 11 38 30 17 00 10 02 61 00 03 0c 08 40 80 00  "..80....a....@.."
>  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 01 b4 00 00 00 00 00 00 00 00 00 00 06 11 38 30  "..............80"
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 05 02 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 01 00  ".."
>
>bus 01, slot 07, func 2, vend:dev:s_vend:s_dev:rev 1106:3104:1106:3104:63
>class 0c, sub_class 03 prog_if 20, hdr 0, flags <pm>, irq 5
>  addr0 ec800000, size 00000100
>  00: 06 11 04 31 17 00 10 02 63 20 03 0c 10 40 80 00  "...1....c ...@.."
>  10: 00 00 80 ec 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 04 31  "...............1"
>  30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00  "................"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  80: 01 00  ".."
>
>bus 01, slot 07, func 3, vend:dev:s_vend:s_dev:rev 1106:3044:1106:3044:46
>class 0c, sub_class 00 prog_if 10, hdr 0, flags <pm>, irq 5
>  addr0 ec000000, size 00000800
>  addr1 0000b000, size 00000080
>  00: 06 11 44 30 97 00 10 02 46 10 00 0c 08 40 00 00  "..D0....F....@.."
>  10: 00 00 00 ec 01 b0 00 00 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 44 30  "..............D0"
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 00 20  "....P.......... "
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 01 00  ".."
>
>bus 01, slot 08, func 0, vend:dev:s_vend:s_dev:rev 10ec:8139:10ec:8139:10
>class 02, sub_class 00 prog_if 00, hdr 0, flags <pm>, irq 5
>  addr0 0000a800, size 00000100
>  addr1 eb800000, size 00000100
>  00: ec 10 39 81 07 00 90 82 10 00 00 02 00 40 00 00  "..9..........@.."
>  10: 01 a8 00 00 00 00 80 eb 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 39 81  "..............9."
>  30: 00 00 00 00 50 00 00 00 00 00 00 00 05 01 20 40  "....P......... @"
>  40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 01 00  ".."
>
>bus 02, slot 00, func 0, vend:dev:s_vend:s_dev:rev 10de:01a0:10de:0c11:b1
>class 03, sub_class 00 prog_if 00, hdr 0, flags <pm,agp>, irq 11
>  addr0 ea000000, size 01000000
>  addr1 f0000000, size 08000000
>  00: de 10 a0 01 07 00 b0 02 b1 00 00 03 00 f8 00 00  "................"
>  10: 00 00 00 ea 08 00 00 f0 00 00 00 00 00 00 00 00  "................"
>  20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 11 0c  "................"
>  30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01  "....`..........."
>  40: 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00  "................"
>  50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
>  60: 01 44  ".D"
>---------- PCI raw data end ----------
>>> pci.4: build list
>>> monitor.1: ddc
>>> isapnp.1: pnp devices
>  pnp device: name = 00:00, bus_id = 00:00, bus = pnp
>    path = /devices/pnp0/00:00
>    id = PNP 0c01
>  pnp device: name = 00:01, bus_id = 00:01, bus = pnp
>    path = /devices/pnp0/00:01
>    id = PNP 0c02
>  pnp device: name = 00:02, bus_id = 00:02, bus = pnp
>    path = /devices/pnp0/00:02
>    id = PNP 0c02
>  pnp device: name = 00:03, bus_id = 00:03, bus = pnp
>    path = /devices/pnp0/00:03
>    id = PNP 0c02
>  pnp device: name = 00:04, bus_id = 00:04, bus = pnp
>    path = /devices/pnp0/00:04
>    id = PNP 0200
>  pnp device: name = 00:05, bus_id = 00:05, bus = pnp
>    path = /devices/pnp0/00:05
>    id = PNP 0b00
>  pnp device: name = 00:06, bus_id = 00:06, bus = pnp
>    path = /devices/pnp0/00:06
>    id = PNP 0800
>  pnp device: name = 00:07, bus_id = 00:07, bus = pnp
>    path = /devices/pnp0/00:07
>    id = PNP 0c04
>  pnp device: name = 00:08, bus_id = 00:08, bus = pnp
>    path = /devices/pnp0/00:08
>    id = PNP 0401
>  pnp device: name = 00:09, bus_id = 00:09, bus = pnp
>    path = /devices/pnp0/00:09
>    id = PNP 0501
>  pnp device: name = 00:0a, bus_id = 00:0a, bus = pnp
>    path = /devices/pnp0/00:0a
>    id = PNP 0501
>  pnp device: name = 00:0b, bus_id = 00:0b, bus = pnp
>    path = /devices/pnp0/00:0b
>    id = PNP 0c02
>  pnp device: name = 00:0c, bus_id = 00:0c, bus = pnp
>    path = /devices/pnp0/00:0c
>    id = PNP b006
>  pnp device: name = 00:0d, bus_id = 00:0d, bus = pnp
>    path = /devices/pnp0/00:0d
>    id = PNP b02f
>>> isa.1: isdn
>---------- ISA ISDN raw data ----------
>---------- ISA ISDN raw data end ----------
>>> isa.1.1: isdn
>>> pcmcia.1: sysfs drivers
>>> pcmcia.2: pcmcia
>sysfs: no such bus: pcmcia
>>> pcmcia.3: pcmcia ctrl
>sysfs: no such class: pcmcia_socket
>>> serial.1: read info
>----- /proc/tty/driver/serial -----
>  0: uart:16550A port:000003F8 irq:4 tx:71 rx:0
>  1: uart:16550A port:000002F8 irq:3 tx:71 rx:0
>  2: uart:unknown port:000003E8 irq:4
>  3: uart:unknown port:000002E8 irq:3
>----- /proc/tty/driver/serial end -----
>----- serial info -----
>  uart 16550A, line 0, port 0x3f8, irq 4, baud 0
>  uart 16550A, line 1, port 0x2f8, irq 3, baud 0
>----- serial info end -----
>>> serial.2: build list
>>> misc.5: misc data
>----- misc resources -----
>i/o:1 0x0000 - 0x001f (0x20) "dma1"
>i/o:1 0x0020 - 0x0021 (0x02) "pic1"
>i/o:0 0x0040 - 0x0043 (0x04) "timer0"
>i/o:0 0x0050 - 0x0053 (0x04) "timer1"
>i/o:1 0x0060 - 0x006f (0x10) "keyboard"
>i/o:1 0x0070 - 0x0077 (0x08) "rtc"
>i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
>i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
>i/o:1 0x00c0 - 0x00df (0x20) "dma2"
>i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
>i/o:1 0x0170 - 0x0177 (0x08) "ide1"
>i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
>i/o:1 0x02f8 - 0x02ff (0x08) "serial"
>i/o:0 0x0370 - 0x0371 (0x02) "pnp 00:0b"
>i/o:1 0x0376 - 0x0376 (0x01) "ide1"
>i/o:1 0x0378 - 0x037a (0x03) "parport0"
>i/o:1 0x03c0 - 0x03df (0x20) "vesafb"
>i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
>i/o:1 0x03f8 - 0x03ff (0x08) "serial"
>i/o:1 0x0778 - 0x077a (0x03) "parport0"
>i/o:0 0x0cf0 - 0x0cf1 (0x02) "PM1a_CNT_BLK"
>i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
>i/o:0 0x5000 - 0x500f (0x10) "0000:00:01.1"
>i/o:0 0x5100 - 0x511f (0x20) "0000:00:01.1"
>i/o:0 0x5500 - 0x550f (0x10) "0000:00:01.1"
>i/o:0 0x5500 - 0x550f (0x10) "amd756-smbus"
>i/o:0 0x9800 - 0x980f (0x10) "0000:00:09.0"
>i/o:1 0x9800 - 0x9807 (0x08) "ide0"
>i/o:1 0x9808 - 0x980f (0x08) "ide1"
>i/o:0 0xa000 - 0xbfff (0x2000) "PCI Bus #01"
>i/o:0 0xa800 - 0xa8ff (0x100) "0000:01:08.0"
>i/o:0 0xa800 - 0xa8ff (0x100) "8139too"
>i/o:0 0xb000 - 0xb07f (0x80) "0000:01:07.3"
>i/o:0 0xb400 - 0xb41f (0x20) "0000:01:07.1"
>i/o:0 0xb400 - 0xb41f (0x20) "uhci_hcd"
>i/o:0 0xb800 - 0xb81f (0x20) "0000:01:07.0"
>i/o:0 0xb800 - 0xb81f (0x20) "uhci_hcd"
>i/o:0 0xd800 - 0xd807 (0x08) "0000:00:04.0"
>i/o:0 0xd800 - 0xd807 (0x08) "forcedeth"
>i/o:0 0xe000 - 0xe07f (0x80) "0000:00:06.0"
>i/o:0 0xe000 - 0xe07f (0x80) "NVidia nForce"
>i/o:0 0xe100 - 0xe1ff (0x100) "0000:00:06.0"
>i/o:0 0xe100 - 0xe1ff (0x100) "NVidia nForce"
>i/o:0 0xe400 - 0xe4fe (0xff) "motherboard"
>i/o:0 0xe400 - 0xe403 (0x04) "PM1a_EVT_BLK"
>i/o:0 0xe404 - 0xe405 (0x02) "PM1b_CNT_BLK"
>i/o:0 0xe408 - 0xe40b (0x04) "PM_TMR"
>i/o:0 0xe420 - 0xe423 (0x04) "GPE0_BLK"
>i/o:0 0xe4a0 - 0xe4a7 (0x08) "GPE1_BLK"
>i/o:0 0xe4ff - 0xe4ff (0x01) "motherboard"
>i/o:0 0xe4ff - 0xe4ff (0x01) "pnp 00:01"
>irq:1  0 (   134524) "timer"
>irq:1  2 (        0) "cascade"
>irq:1  3 (       20) "serial"
>irq:1  4 (       18) "serial"
>irq:0  5 (    39508) "uhci_hcd:usb3" "uhci_hcd:usb4" "ehci_hcd:usb5" "ohci1394" "eth1"
>irq:0  6 (     9472) "ohci_hcd:usb1" "ohci_hcd:usb2"
>irq:1  7 (       10) "parport0"
>irq:1  8 (        2) "rtc"
>irq:0  9 (        0) "acpi"
>irq:0 11 (    34105) "NVidia nForce" "nvidia"
>irq:1 14 (    24279) "ide0"
>irq:1 15 (     8997) "ide1"
>dma:1 3 "parport0"
>dma:1 4 "cascade"
>----- misc resources end -----
>>> parallel.1: pp mod
>----- exec: "/sbin/rmmod lp" -----
>----- return code: ? -----
>----- exec: "/sbin/rmmod parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe parport_pc" -----
>----- return code: ? -----
>----- exec: "/sbin/modprobe lp" -----
>----- return code: ? -----
>>> parallel.2.1: lp read info
>>> parallel.2.2: lp read info
>>> parallel.2.3: lp read info
>----- parallel info -----
>/proc/sys/dev/parport/parport0/base-addr
>  888	1912
>/proc/sys/dev/parport/parport0/autoprobe
>----- parallel info end -----
>>> parallel.5: ppa mod
>----- exec: "/sbin/modprobe ppa " -----
>----- return code: ? -----
>>> parallel.6: zip read info
>----- exec: "/sbin/rmmod ppa" -----
>----- return code: ? -----
>----- parallel info -----
>----- parallel info end -----
>>> block.1: block modules
>>> block.2: sysfs drivers
>----- sysfs driver list (id 0x4dba288c2ea57f08) -----
>       ide-cdrom: /devices/pci0000:00/0000:00:09.0/ide1/1.0
>       ide-cdrom: /devices/pci0000:00/0000:00:09.0/ide1/1.1
>        ide-disk: /devices/pci0000:00/0000:00:09.0/ide0/0.0
>        ide-disk: /devices/pci0000:00/0000:00:09.0/ide0/0.1
>         8139too: /devices/pci0000:00/0000:00:08.0/0000:01:08.0
>         AMD_IDE: /devices/pci0000:00/0000:00:09.0
>       Intel ICH: /devices/pci0000:00/0000:00:06.0
>  agpgart-nvidia: /devices/pci0000:00/0000:00:00.0
>    amd756_smbus: /devices/pci0000:00/0000:00:01.1
>        ehci_hcd: /devices/pci0000:00/0000:00:08.0/0000:01:07.2
>       forcedeth: /devices/pci0000:00/0000:00:04.0
>          nvidia: /devices/pci0000:00/0000:00:1e.0/0000:02:00.0
>        ohci1394: /devices/pci0000:00/0000:00:08.0/0000:01:07.3
>        ohci_hcd: /devices/pci0000:00/0000:00:02.0
>        ohci_hcd: /devices/pci0000:00/0000:00:03.0
>        uhci_hcd: /devices/pci0000:00/0000:00:08.0/0000:01:07.0
>        uhci_hcd: /devices/pci0000:00/0000:00:08.0/0000:01:07.1
>           i8042: /devices/platform/i8042
>      serial8250: /devices/platform/serial8250
>          vesafb: /devices/platform/vesafb.0
>      parport_pc: /devices/pnp0/00:08
>          serial: /devices/pnp0/00:09
>          serial: /devices/pnp0/00:0a
>          system: /devices/pnp0/00:00
>          system: /devices/pnp0/00:01
>          system: /devices/pnp0/00:02
>          system: /devices/pnp0/00:03
>          system: /devices/pnp0/00:0b
>              sd: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0/host13/target13:0:0/13:0:0:0
>          hiddev: /module/usbhid
>             hub: /devices/pci0000:00/0000:00:02.0/usb1/1-0:1.0
>             hub: /devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0
>             hub: /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-0:1.0
>             hub: /devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4/4-0:1.0
>             hub: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-0:1.0
>             hub: /module/usbcore
>     usb-storage: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0
>     usb-storage: /module/usb_storage
>           usbfs: /module/usbcore
>          usbhid: /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0
>          usbhid: /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.1
>          usbhid: /module/usbhid
>             usb: /devices/pci0000:00/0000:00:02.0/usb1/1-1
>             usb: /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2
>             usb: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4
>             usb: /devices/pci0000:00/0000:00:02.0/usb1
>             usb: /devices/pci0000:00/0000:00:03.0/usb2
>             usb: /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3
>             usb: /devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4
>             usb: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5
>             usb: /module/usbcore
>----- sysfs driver list end -----
>>> block.3: cdrom
>----- /proc/sys/dev/cdrom/info -----
>drive name:		hdd	hdc
>drive speed:		40	40
>drive # of slots:	1	1
>Can close tray:		1	1
>Can open tray:		1	1
>Can lock tray:		1	1
>Can change speed:	1	1
>Can select disk:	0	0
>Can read multisession:	1	1
>Can read MCN:		1	1
>Reports media changed:	1	1
>Can play audio:		1	1
>Can write CD-R:		1	1
>Can write CD-RW:	1	1
>Can read DVD:		1	1
>Can write DVD-R:	1	1
>Can write DVD-RAM:	0	0
>Can read MRW:		1	1
>Can write MRW:		1	1
>Can write RAM:		1	1
>----- /proc/sys/dev/cdrom/info end -----
>>> block.4: partition
>----- /proc/partitions -----
>     3     0  156290904 hda
>     3     1     971901 hda1
>     3     2  155308387 hda2
>     3    64   78150744 hdb
>     3    65   78148161 hdb1
>     8     0  160836480 sda
>     8     1  160826683 sda1
>----- /proc/partitions end -----
>disks:
>  hda
>  hdb
>  sda
>partitions:
>  hda1
>  hda2
>  hdb1
>  sda1
>>> block.5: get sysfs block dev data
>  ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:09.0/ide0/0.0
>  ide: bus_id = 0.1 path = /devices/pci0000:00/0000:00:09.0/ide0/0.1
>  ide: bus_id = 1.0 path = /devices/pci0000:00/0000:00:09.0/ide1/1.0
>  ide: bus_id = 1.1 path = /devices/pci0000:00/0000:00:09.0/ide1/1.1
>  block: name = hda, path = /block/hda
>    dev = 3:0
>    range = 64
>    block device: bus = ide, bus_id = 0.0 driver = ide-disk
>      path = /devices/pci0000:00/0000:00:09.0/ide0/0.0
>>> block.5: /dev/hda
>>> block.5.1: /dev/hda geo
>  dev = /dev/hda, fd = 3
>  open ok, fd = 3
>/dev/hda: ioctl(geo) ok
>/dev/hda: ioctl(block size) ok
>/dev/hda: ioctl(disk size) ok
>  block: name = hdb, path = /block/hdb
>    dev = 3:64
>    range = 64
>    block device: bus = ide, bus_id = 0.1 driver = ide-disk
>      path = /devices/pci0000:00/0000:00:09.0/ide0/0.1
>>> block.5: /dev/hdb
>>> block.5.1: /dev/hdb geo
>  dev = /dev/hdb, fd = 3
>  open ok, fd = 3
>/dev/hdb: ioctl(geo) ok
>/dev/hdb: ioctl(block size) ok
>/dev/hdb: ioctl(disk size) ok
>  block: name = hdc, path = /block/hdc
>    dev = 22:0
>    range = 1
>    block device: bus = ide, bus_id = 1.0 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:09.0/ide1/1.0
>  block: name = hdd, path = /block/hdd
>    dev = 22:64
>    range = 1
>    block device: bus = ide, bus_id = 1.1 driver = ide-cdrom
>      path = /devices/pci0000:00/0000:00:09.0/ide1/1.1
>  block: name = loop0, path = /block/loop0
>    dev = 7:0
>    range = 1
>  block: name = loop1, path = /block/loop1
>    dev = 7:1
>    range = 1
>  block: name = loop2, path = /block/loop2
>    dev = 7:2
>    range = 1
>  block: name = loop3, path = /block/loop3
>    dev = 7:3
>    range = 1
>  block: name = loop4, path = /block/loop4
>    dev = 7:4
>    range = 1
>  block: name = loop5, path = /block/loop5
>    dev = 7:5
>    range = 1
>  block: name = loop6, path = /block/loop6
>    dev = 7:6
>    range = 1
>  block: name = loop7, path = /block/loop7
>    dev = 7:7
>    range = 1
>  block: name = md0, path = /block/md0
>    dev = 9:0
>    range = 1
>  block: name = ram0, path = /block/ram0
>    dev = 1:0
>    range = 1
>  block: name = ram10, path = /block/ram10
>    dev = 1:10
>    range = 1
>  block: name = ram11, path = /block/ram11
>    dev = 1:11
>    range = 1
>  block: name = ram12, path = /block/ram12
>    dev = 1:12
>    range = 1
>  block: name = ram13, path = /block/ram13
>    dev = 1:13
>    range = 1
>  block: name = ram14, path = /block/ram14
>    dev = 1:14
>    range = 1
>  block: name = ram15, path = /block/ram15
>    dev = 1:15
>    range = 1
>  block: name = ram1, path = /block/ram1
>    dev = 1:1
>    range = 1
>  block: name = ram2, path = /block/ram2
>    dev = 1:2
>    range = 1
>  block: name = ram3, path = /block/ram3
>    dev = 1:3
>    range = 1
>  block: name = ram4, path = /block/ram4
>    dev = 1:4
>    range = 1
>  block: name = ram5, path = /block/ram5
>    dev = 1:5
>    range = 1
>  block: name = ram6, path = /block/ram6
>    dev = 1:6
>    range = 1
>  block: name = ram7, path = /block/ram7
>    dev = 1:7
>    range = 1
>  block: name = ram8, path = /block/ram8
>    dev = 1:8
>    range = 1
>  block: name = ram9, path = /block/ram9
>    dev = 1:9
>    range = 1
>  block: name = sda, path = /block/sda
>    dev = 8:0
>    range = 16
>    block device: bus = scsi, bus_id = 13:0:0:0 driver = sd
>      path = /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0/host13/target13:0:0/13:0:0:0
>    vendor = HDS72251
>    model = 6VLAT20
>    rev = V34O
>    type = 0
>>> block.5: /dev/sda
>>> scsi.1: scsi modules
>>> scsi.2: scsi tape
>>> scsi.3: scsi generic
>  scsi: name = sg0, path = /class/scsi_generic/sg0
>    dev = 21:0
>    scsi device: bus = scsi, bus_id = 13:0:0:0 driver = sd
>      path = /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0/host13/target13:0:0/13:0:0:0
>>> usb.1: sysfs drivers
>>> usb.2: usb
>  usb dev: /devices/pci0000:00/0000:00:02.0/usb1/1-1
>  usb dev: /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2
>  usb dev: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4
>  usb dev: /devices/pci0000:00/0000:00:02.0/usb1
>  usb dev: /devices/pci0000:00/0000:00:03.0/usb2
>  usb dev: /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3
>  usb dev: /devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4
>  usb dev: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5
>  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:02.0/usb1/1-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:02.0/usb1
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-15-default ohci_hcd"
>    product = "OHCI Host Controller"
>    serial = "0000:00:02.0"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 1-1:1.0, bus_id = 1-1:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0
>    modalias = "usb:v046DpC512d3900dc00dsc00dp00ic03isc01ip01"
>    bInterfaceNumber = 0
>    bInterfaceClass = 3
>    bInterfaceSubClass = 1
>    bInterfaceProtocol = 1
>    if: 1-1:1.0 @ /devices/pci0000:00/0000:00:02.0/usb1/1-1
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x046d
>    idProduct = 0xc512
>    manufacturer = "Logitech"
>    product = "USB Receiver"
>    bcdDevice = 3900
>    speed = "1.5"
>  usb device: name = 1-1:1.1, bus_id = 1-1:1.1, bus = usb
>    path = /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.1
>    modalias = "usb:v046DpC512d3900dc00dsc00dp00ic03isc01ip02"
>    bInterfaceNumber = 1
>    bInterfaceClass = 3
>    bInterfaceSubClass = 1
>    bInterfaceProtocol = 2
>    if: 1-1:1.1 @ /devices/pci0000:00/0000:00:02.0/usb1/1-1
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x046d
>    idProduct = 0xc512
>    manufacturer = "Logitech"
>    product = "USB Receiver"
>    bcdDevice = 3900
>    speed = "1.5"
>  usb device: name = 1-1, bus_id = 1-1, bus = usb
>    path = /devices/pci0000:00/0000:00:02.0/usb1/1-1
>  usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:03.0/usb2
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-15-default ohci_hcd"
>    product = "OHCI Host Controller"
>    serial = "0000:00:03.0"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 3-0:1.0, bus_id = 3-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 3-0:1.0 @ /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-15-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:01:07.0"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 3-2:1.0, bus_id = 3-2:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2/3-2:1.0
>    modalias = "usb:v04A9p220Ed0100dcFFdsc00dpFFic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 255
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 255
>    if: 3-2:1.0 @ /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2
>    bDeviceClass = 255
>    bDeviceSubClass = 0
>    bDeviceProtocol = 255
>    idVendor = 0x04a9
>    idProduct = 0x220e
>    manufacturer = "Canon"
>    product = "CanoScan"
>    bcdDevice = 0100
>    speed = "12"
>  usb device: name = 3-2, bus_id = 3-2, bus = usb
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2
>  usb device: name = 4-0:1.0, bus_id = 4-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4/4-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 4-0:1.0 @ /devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-15-default uhci_hcd"
>    product = "UHCI Host Controller"
>    serial = "0000:01:07.1"
>    bcdDevice = 0206
>    speed = "12"
>  usb device: name = 5-0:1.0, bus_id = 5-0:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-0:1.0
>    modalias = "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*"
>    bInterfaceNumber = 0
>    bInterfaceClass = 9
>    bInterfaceSubClass = 0
>    bInterfaceProtocol = 0
>    if: 5-0:1.0 @ /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5
>    bDeviceClass = 9
>    bDeviceSubClass = 0
>    bDeviceProtocol = 1
>    idVendor = 0x0000
>    idProduct = 0x0000
>    manufacturer = "Linux 2.6.13-15-default ehci_hcd"
>    product = "EHCI Host Controller"
>    serial = "0000:01:07.2"
>    bcdDevice = 0206
>    speed = "480"
>  usb device: name = 5-4:1.0, bus_id = 5-4:1.0, bus = usb
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0
>    modalias = "usb:v07ABpFCCDd0436dc00dsc00dp00ic08isc06ip50"
>    bInterfaceNumber = 0
>    bInterfaceClass = 8
>    bInterfaceSubClass = 6
>    bInterfaceProtocol = 80
>    if: 5-4:1.0 @ /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4
>    bDeviceClass = 0
>    bDeviceSubClass = 0
>    bDeviceProtocol = 0
>    idVendor = 0x07ab
>    idProduct = 0xfccd
>    manufacturer = "Freecom Technologies"
>    product = "FHD-Classic"
>    serial = "FW436_0B29140042F9AA27"
>    bcdDevice = 0436
>    speed = "480"
>  usb device: name = 5-4, bus_id = 5-4, bus = usb
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4
>  usb device: name = usb1, bus_id = usb1, bus = usb
>    path = /devices/pci0000:00/0000:00:02.0/usb1
>  usb device: name = usb2, bus_id = usb2, bus = usb
>    path = /devices/pci0000:00/0000:00:03.0/usb2
>  usb device: name = usb3, bus_id = usb3, bus = usb
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3
>  usb device: name = usb4, bus_id = usb4, bus = usb
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4
>  usb device: name = usb5, bus_id = usb5, bus = usb
>    path = /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5
>>> usb.3.1: joydev mod
>>> usb.3.2: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> usb.3.3: input
>  input: name = event0, path = /class/input/event0
>    dev = 13:64
>  input: name = event1, path = /class/input/event1
>    dev = 13:65
>    input device: bus = usb, bus_id = 1-1:1.0 driver = usbhid
>      path = /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0
>  input: name = event2, path = /class/input/event2
>    dev = 13:66
>    input device: bus = usb, bus_id = 1-1:1.1 driver = usbhid
>      path = /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.1
>  input: name = mice, path = /class/input/mice
>    dev = 13:63
>  input: name = mouse0, path = /class/input/mouse0
>    dev = 13:32
>    input device: bus = usb, bus_id = 1-1:1.1 driver = usbhid
>      path = /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.1
>>> usb.3.4: lp
>>> usb.3.5: serial
>>> edd.1: edd mod
>>> edd.2: edd info
>edd: 0x80
>  size: 312581808
>  chs default: 310101/16/63
>  chs legacy: 1024/255/63
>  caps: fixed edd 
>  attached: #0 
>edd: 0x81
>  size: 156301488
>  chs default: 155061/16/63
>  chs legacy: 1024/255/63
>  caps: fixed edd 
>  attached: #0 
>>> braille.1.1: alva
>>> braille.2.1: alva open
>>> braille.3.1: alva init ok
>>> braille.4.1: alva read data
>alva.100@/dev/ttyS0[0]: 
>>> braille.5.1: alva read done
>>> braille.1.1: fhp_old
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: fhp_el
>>> braille.2.1: fhp open
>>> braille.3.1: fhp init ok
>>> braille.4.1: fhp write ok
>>> braille.5.1: fhp read done
>fhp@/dev/ttyS0[0]: 
>no fhp display: 0x00
>>> braille.1.1: ht
>>> braille.2.1: ht open
>>> braille.3.1: ht init ok
>>> braille.4.1: ht write ok
>>> braille.5.1: ht read done
>ht@/dev/ttyS0[1]: 00  "."
>no ht display: 0x00
>>> braille.1.1: baum
>>> braille.2.1: baum open
>>> braille.3.1: baum write ok
>>> braille.4.1: baum read done
>baum@/dev/ttyS0[0]: 
>>> braille.1.2: alva
>>> braille.2.2: alva open
>>> braille.3.2: alva init ok
>>> braille.4.2: alva read data
>alva.100@/dev/ttyS1[0]: 
>>> braille.5.2: alva read done
>>> braille.1.2: fhp_old
>>> braille.2.2: fhp open
>>> braille.3.2: fhp init ok
>>> braille.4.2: fhp write ok
>>> braille.5.2: fhp read done
>fhp@/dev/ttyS1[0]: 
>no fhp display: 0x00
>>> braille.1.2: fhp_el
>>> braille.2.2: fhp open
>>> braille.3.2: fhp init ok
>>> braille.4.2: fhp write ok
>>> braille.5.2: fhp read done
>fhp@/dev/ttyS1[0]: 
>no fhp display: 0x00
>>> braille.1.2: ht
>>> braille.2.2: ht open
>>> braille.3.2: ht init ok
>>> braille.4.2: ht write ok
>>> braille.5.2: ht read done
>ht@/dev/ttyS1[1]: 00  "."
>no ht display: 0x00
>>> braille.1.2: baum
>>> braille.2.2: baum open
>>> braille.3.2: baum write ok
>>> braille.4.2: baum read done
>baum@/dev/ttyS1[0]: 
>>> modem.1: serial
>******  started child process 8388 (15s/120s)  ******
>>> modem.2: init
>>> modem.3.1: at test
>>> modem.3.2: at test
>>> modem.3.3: at test
>>> modem.3.4: at test
>>> modem.4: init string
>>> modem.5: speed
>>> modem.5: pnp id
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>
>/dev/ttyS1
>  not a modem
>----- serial modems end -----
>******  stopped child process 8388 (121s)  ******
>----- serial modems -----
>/dev/ttyS0
>  not a modem
>
>/dev/ttyS1
>  not a modem
>----- serial modems end -----
>>> mouse.2: serial
>******  started child process 8402 (20s/20s)  ******
>----- serial mice -----
>/dev/ttyS0
>
>/dev/ttyS1
>----- serial mice end -----
>******  stopped child process 8402 (18s)  ******
>----- serial mice -----
>/dev/ttyS0
>
>/dev/ttyS1
>----- serial mice end -----
>>> input.1: joydev mod
>>> input.1.1: evdev mod
>----- exec: "/sbin/modprobe evdev " -----
>  FATAL: Module evdev not found.
>----- return code: ? -----
>>> input.2: input
>----- /proc/bus/input/devices -----
>  I: Bus=0010 Vendor=001f Product=0001 Version=0100
>  N: Name="PC Speaker"
>  P: Phys=isa0061/input0
>  H: Handlers=kbd event0 
>  B: EV=40001 
>  B: SND=6 
>  
>  I: Bus=0003 Vendor=046d Product=c512 Version=3900
>  N: Name="Logitech USB Receiver"
>  P: Phys=usb-0000:00:02.0-1/input0
>  H: Handlers=kbd event1 
>  B: EV=120003 
>  B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe 
>  B: LED=1f 
>  
>  I: Bus=0003 Vendor=046d Product=c512 Version=3900
>  N: Name="Logitech USB Receiver"
>  P: Phys=usb-0000:00:02.0-1/input1
>  H: Handlers=kbd mouse0 event2 
>  B: EV=f 
>  B: KEY=7fffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff 0 0 1878 d800d100 1e0000 0 0 0 
>  B: REL=143 
>  B: ABS=100 0 
>  
>----- /proc/bus/input/devices end -----
>bus = 16, name = PC Speaker
>  handlers = kbd event0
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 3, name = Logitech USB Receiver
>  handlers = kbd event1
>  key = 0001000000000007ff800000000007fffebeffdfffeffffffffffffffffffffe
>  mouse buttons = 0
>  mouse wheels = 0
>bus = 3, name = Logitech USB Receiver
>  handlers = kbd mouse0 event2
>  key = 7fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff000000000000000000001878d800d100001e0000000000000000000000000000
>  rel = 00000143
>  abs = 0000010000000000
>  mouse buttons = 8
>  mouse wheels = 2
>>> kbd.2: uml
>>> cpu.1: cpuinfo
>----- /proc/cpuinfo -----
>  processor	: 0
>  vendor_id	: AuthenticAMD
>  cpu family	: 6
>  model		: 8
>  model name	: AMD Athlon(TM) XP 2400+
>  stepping	: 1
>  cpu MHz		: 1995.131
>  cache size	: 256 KB
>  fdiv_bug	: no
>  hlt_bug		: no
>  f00f_bug	: no
>  coma_bug	: no
>  fpu		: yes
>  fpu_exception	: yes
>  cpuid level	: 1
>  wp		: yes
>  flags		: fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
>  bogomips	: 3994.43
>  
>----- /proc/cpuinfo end -----
>>> kbd.3: serial console
>/dev/console: major 4, minor 7
>>> fb.1: read info
>fb: size 1024 x 768
>fb: timing 78.65 MHz, 59.95 kHz, 75.69 Hz
>>> net.1: get network data
>  net interface: name = eth0, classname = net, path = /class/net/eth0
>    type = 1
>    hw_addr = 00:0c:6e:87:d8:39
>    net device: path = /devices/pci0000:00/0000:00:04.0
>    ethtool driver: forcedeth
>    ethtool    bus: 0000:00:04.0
>  net interface: name = eth1, classname = net, path = /class/net/eth1
>    type = 1
>    hw_addr = 00:40:f4:a7:87:1c
>    net device: path = /devices/pci0000:00/0000:00:08.0/0000:01:08.0
>    ethtool driver: 8139too
>    ethtool    bus: 0000:01:08.0
>  net interface: name = lo, classname = net, path = /class/net/lo
>    type = 772
>    hw_addr = 00:00:00:00:00:00
>  net interface: name = sit0, classname = net, path = /class/net/sit0
>    type = 776
>    hw_addr = 00:00:00:00
>  eth0: ethtool link state: 1
>  eth1: ethtool link state: 1
>  lo: ethtool link state: 1
>  sit0: GLINK ethtool error: Invalid argument
>>> pppoe.1: looking for pppoe
>>> pppoe.2: discovery
>Attempt number 1
>eth0: Sending PADI packet
>send failed: Network is down
>eth1: Sending PADI packet
>Timeout waiting for PADO packets
>Attempt number 2
>eth0: Sending PADI packet
>send failed: Network is down
>eth1: Sending PADI packet
>Timeout waiting for PADO packets
>>> 38.1: detecting wlan features
>>> 38.2: assign udi
>>> isdn.1: list
>>> dsl.1: list
>>> int.2: cdrom
>>> int.3: media
>>> int.4.1: /dev/hda
>  read_block0: 512 bytes (5s, 0us)
>>> int.4.2: /dev/hdb
>  read_block0: 512 bytes (5s, 0us)
>>> int.4.3: /dev/sda
>  read_block0: open(/dev/sda) failed
>>> int.4: floppy
>>> int.5: bios
>>> int.6: mouse
>>> int.15: system info
>  system type:
>  acpi: 1
>>> int.7: hdb
>>> int.8: usbscsi
>>> int.9: hotplug
>>> int.10: modem
>>> int.11: wlan
>>> int.12: udev
>-----  udevinfo -----
>  P: /block/hda
>  N: hda
>  S: disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015
>  S: disk/by-path/pci-0000:00:09.0-ide-0:0
>  E: ID_TYPE=disk
>  E: ID_MODEL=SAMSUNG_SP1604N
>  E: ID_SERIAL=S013J10WB36015
>  E: ID_REVISION=TM100-23
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:09.0-ide-0:0
>  
>  P: /block/hda/hda1
>  N: hda1
>  S: disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015-part1
>  S: disk/by-path/pci-0000:00:09.0-ide-0:0-part1
>  E: ID_TYPE=disk
>  E: ID_MODEL=SAMSUNG_SP1604N
>  E: ID_SERIAL=S013J10WB36015
>  E: ID_REVISION=TM100-23
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:09.0-ide-0:0
>  E: ID_FS_USAGE=other
>  E: ID_FS_TYPE=swap
>  E: ID_FS_VERSION=2
>  E: ID_FS_UUID=
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/hda/hda2
>  N: hda2
>  S: disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015-part2
>  S: disk/by-path/pci-0000:00:09.0-ide-0:0-part2
>  S: disk/by-uuid/f37ee927-92aa-47ee-a279-fd4c9dc5438e
>  E: ID_TYPE=disk
>  E: ID_MODEL=SAMSUNG_SP1604N
>  E: ID_SERIAL=S013J10WB36015
>  E: ID_REVISION=TM100-23
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:09.0-ide-0:0
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=reiserfs
>  E: ID_FS_VERSION=3.6
>  E: ID_FS_UUID=f37ee927-92aa-47ee-a279-fd4c9dc5438e
>  E: ID_FS_LABEL=
>  E: ID_FS_LABEL_SAFE=
>  
>  P: /block/hdb
>  N: hdb
>  S: disk/by-id/ata-ST380020A_5GC0YPFW
>  S: disk/by-path/pci-0000:00:09.0-ide-0:1
>  E: ID_TYPE=disk
>  E: ID_MODEL=ST380020A
>  E: ID_SERIAL=5GC0YPFW
>  E: ID_REVISION=3.39
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:09.0-ide-0:1
>  
>  P: /block/hdb/hdb1
>  N: hdb1
>  S: disk/by-id/ata-ST380020A_5GC0YPFW-part1
>  S: disk/by-path/pci-0000:00:09.0-ide-0:1-part1
>  S: disk/by-uuid/F0E0783FE0780E5A
>  S: disk/by-label/WINXP
>  E: ID_TYPE=disk
>  E: ID_MODEL=ST380020A
>  E: ID_SERIAL=5GC0YPFW
>  E: ID_REVISION=3.39
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:09.0-ide-0:1
>  E: ID_FS_USAGE=filesystem
>  E: ID_FS_TYPE=ntfs
>  E: ID_FS_VERSION=3.1
>  E: ID_FS_UUID=F0E0783FE0780E5A
>  E: ID_FS_LABEL=WINXP
>  E: ID_FS_LABEL_SAFE=WINXP
>  
>  P: /block/hdc
>  N: hdc
>  S: disk/by-id/ata-PHILIPS_PBDV16LSP1_DL100526036668
>  S: disk/by-path/pci-0000:00:09.0-ide-1:0
>  S: dvdrecorder
>  S: cdrom
>  S: dvd
>  S: cdrecorder
>  E: ID_TYPE=cd
>  E: ID_MODEL=PHILIPS_PBDV16LSP1
>  E: ID_SERIAL=DL100526036668
>  E: ID_REVISION=B1.8
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:09.0-ide-1:0
>  
>  P: /block/hdd
>  N: hdd
>  S: disk/by-path/pci-0000:00:09.0-ide-1:1
>  S: dvdrecorder2
>  E: ID_TYPE=cd
>  E: ID_MODEL=PHILIPS_DVDR1640P
>  E: ID_SERIAL=
>  E: ID_REVISION=P3.4
>  E: ID_BUS=ata
>  E: ID_PATH=pci-0000:00:09.0-ide-1:1
>  
>  P: /class/input/event0
>  N: input/event0
>  
>  P: /class/input/event1
>  N: input/event1
>  
>  P: /class/input/event2
>  N: input/event2
>  
>  P: /class/input/mice
>  N: input/mice
>  
>  P: /class/input/mouse0
>  N: input/mouse0
>  
>  P: /class/sound/controlC0
>  N: snd/controlC0
>  
>  P: /class/sound/pcmC0D0c
>  N: snd/pcmC0D0c
>  
>  P: /class/sound/pcmC0D0p
>  N: snd/pcmC0D0p
>  
>  P: /class/sound/pcmC0D1c
>  N: snd/pcmC0D1c
>  
>  P: /class/sound/pcmC0D2p
>  N: snd/pcmC0D2p
>  
>  P: /class/sound/seq
>  N: snd/seq
>  
>  P: /class/sound/timer
>  N: snd/timer
>  
>  P: /class/usb_device/usbdev1.1
>  N: usbdev1.1
>  S: bus/usb/1/1
>  
>  P: /class/usb_device/usbdev1.2
>  N: usbdev1.2
>  S: bus/usb/1/2
>  
>  P: /class/usb_device/usbdev2.1
>  N: usbdev2.1
>  S: bus/usb/2/1
>  
>  P: /class/usb_device/usbdev3.1
>  N: usbdev3.1
>  S: bus/usb/3/1
>  
>  P: /class/usb_device/usbdev3.2
>  N: usbdev3.2
>  S: bus/usb/3/2
>  
>  P: /class/usb_device/usbdev4.1
>  N: usbdev4.1
>  S: bus/usb/4/1
>  
>  P: /class/usb_device/usbdev5.1
>  N: usbdev5.1
>  S: bus/usb/5/1
>  
>  P: /class/usb_device/usbdev5.31
>  N: usbdev5.31
>  S: bus/usb/5/31
>  
>-----  udevinfo end -----
>/block/hda
>  name: hda
>  links: disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015, disk/by-path/pci-0000:00:09.0-ide-0:0
>/block/hda/hda1
>  name: hda1
>  links: disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015-part1, disk/by-path/pci-0000:00:09.0-ide-0:0-part1
>/block/hda/hda2
>  name: hda2
>  links: disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015-part2, disk/by-path/pci-0000:00:09.0-ide-0:0-part2, disk/by-uuid/f37ee927-92aa-47ee-a279-fd4c9dc5438e
>/block/hdb
>  name: hdb
>  links: disk/by-id/ata-ST380020A_5GC0YPFW, disk/by-path/pci-0000:00:09.0-ide-0:1
>/block/hdb/hdb1
>  name: hdb1
>  links: disk/by-id/ata-ST380020A_5GC0YPFW-part1, disk/by-path/pci-0000:00:09.0-ide-0:1-part1, disk/by-uuid/F0E0783FE0780E5A, disk/by-label/WINXP
>/block/hdc
>  name: hdc
>  links: disk/by-id/ata-PHILIPS_PBDV16LSP1_DL100526036668, disk/by-path/pci-0000:00:09.0-ide-1:0, dvdrecorder, cdrom, dvd, cdrecorder
>/block/hdd
>  name: hdd
>  links: disk/by-path/pci-0000:00:09.0-ide-1:1, dvdrecorder2
>/class/input/event0
>  name: input/event0
>/class/input/event1
>  name: input/event1
>/class/input/event2
>  name: input/event2
>/class/input/mice
>  name: input/mice
>/class/input/mouse0
>  name: input/mouse0
>/class/sound/controlC0
>  name: snd/controlC0
>/class/sound/pcmC0D0c
>  name: snd/pcmC0D0c
>/class/sound/pcmC0D0p
>  name: snd/pcmC0D0p
>/class/sound/pcmC0D1c
>  name: snd/pcmC0D1c
>/class/sound/pcmC0D2p
>  name: snd/pcmC0D2p
>/class/sound/seq
>  name: snd/seq
>/class/sound/timer
>  name: snd/timer
>/class/usb_device/usbdev1.1
>  name: usbdev1.1
>  links: bus/usb/1/1
>/class/usb_device/usbdev1.2
>  name: usbdev1.2
>  links: bus/usb/1/2
>/class/usb_device/usbdev2.1
>  name: usbdev2.1
>  links: bus/usb/2/1
>/class/usb_device/usbdev3.1
>  name: usbdev3.1
>  links: bus/usb/3/1
>/class/usb_device/usbdev3.2
>  name: usbdev3.2
>  links: bus/usb/3/2
>/class/usb_device/usbdev4.1
>  name: usbdev4.1
>  links: bus/usb/4/1
>/class/usb_device/usbdev5.1
>  name: usbdev5.1
>  links: bus/usb/5/1
>/class/usb_device/usbdev5.31
>  name: usbdev5.31
>  links: bus/usb/5/31
>>> int.13: device names
>>> int.14: soft raid
>----- soft raid devices -----
>----- soft raid devices end -----
>>> int.15: geo
>>> int.16: parent
>  prop read: rdCR.lZF+r4EgHp4 (ok)
>  prop read: rdCR.n_7QNeEnh23 (failed)
>  old prop read: rdCR.n_7QNeEnh23 (ok)
>  prop read: rdCR.EMpH5pjcahD (failed)
>  old prop read: rdCR.EMpH5pjcahD (failed)
>  prop read: rdCR.f5u1ucRm+H9 (failed)
>  old prop read: rdCR.f5u1ucRm+H9 (failed)
>  prop read: rdCR.8uRK7LxiIA2 (failed)
>  old prop read: rdCR.8uRK7LxiIA2 (failed)
>  prop read: rdCR.AJKleuxpiP0 (failed)
>  old prop read: rdCR.AJKleuxpiP0 (failed)
>  prop read: rdCR.hWmSPAStPX7 (failed)
>  old prop read: rdCR.hWmSPAStPX7 (failed)
>  prop read: rdCR.9N+EecqykME (failed)
>  old prop read: rdCR.9N+EecqykME (failed)
>  prop read: YMnp.ecK7NLYWZ5D (failed)
>  old prop read: YMnp.ecK7NLYWZ5D (failed)
>  prop read: rdCR.DziBbWO85o5 (failed)
>  old prop read: rdCR.DziBbWO85o5 (failed)
>  prop read: rdCR.CxwsZFjVASF (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1a4 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1ac (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1ad (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1aa (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1b2 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1b4 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1c2_0 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1c2 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1c3 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1b0 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1b1 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1b8 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1bc (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1b7 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3038_0 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3038 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3104 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_1106_3044 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10ec_8139 (ok)
>  prop read: /org/freedesktop/Hal/devices/pci_10de_1a0 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c01 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02_2 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02_1 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02_0 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0200 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0b00 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0800 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c04 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0401 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501_0 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0c02 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNPb006 (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNPb02f (ok)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_0 (failed)
>  prop read: S_Uw.3fyvFV+mbWD (failed)
>  old prop read: S_Uw.3fyvFV+mbWD (failed)
>  prop read: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1 (failed)
>  prop read: v9l_.3fyvFV+mbWD (failed)
>  old prop read: v9l_.3fyvFV+mbWD (failed)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_S013J10WB36015 (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_part1_size_995226624 (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_f37ee927_92aa_47ee_a279_fd4c9dc5438e (ok)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_5GC0YPFW (ok)
>  prop read: /org/freedesktop/Hal/devices/volume_uuid_F0E0783FE0780E5A (ok)
>  prop read: /org/freedesktop/Hal/devices/storage_serial_DL100526036668 (ok)
>  prop read: /org/freedesktop/Hal/devices/storage_model_PHILIPS_DVDR1640P (ok)
>  prop read: n2I9.ZGmms3QDCAA (ok)
>  prop read: 1tKY.SE1wIdpsiiC (failed)
>  old prop read: 1tKY.SE1wIdpsiiC (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_02_0_if0 (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if0_logicaldev_input (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if1_logicaldev_input (failed)
>  prop read: dOTr.vf20J6yY7Q9 (failed)
>  old prop read: dOTr.vf20J6yY7Q9 (failed)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0_if0 (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0_if0 (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial_if0 (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1_if0 (ok)
>  prop read: /org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2_if0 (ok)
>  prop read: rdCR.j8NaKXDZtZ6 (ok)
>  prop read: rdCR.EY_qmtb9YY0 (failed)
>  old prop read: rdCR.EY_qmtb9YY0 (ok)
>  prop read: /org/freedesktop/Hal/devices/net_00_0c_6e_87_d8_39 (ok)
>  prop read: /org/freedesktop/Hal/devices/net_00_40_f4_a7_87_1c (ok)
>  prop read: ZsBS.GQNx7L4uPNA (ok)
>  prop read: wl2P.nfEXJulusj6 (ok)
>----- /proc/modules -----
>  lp 11460 0 - Live 0xdefaf000
>  parport_pc 38980 1 - Live 0xdefd2000
>  parport 33864 2 lp,parport_pc, Live 0xdefe9000
>  st 38944 0 - Live 0xdefde000
>  sr_mod 16420 0 - Live 0xdefa9000
>  sg 35744 0 - Live 0xdefc8000
>  sd_mod 18576 1 - Live 0xdefa3000
>  usb_storage 72512 1 - Live 0xdefb5000
>  ipt_MASQUERADE 3200 2 - Live 0xdef9a000
>  ipt_pkttype 1664 1 - Live 0xdef3e000
>  ipt_TCPMSS 4352 1 - Live 0xdef5d000
>  ipt_LOG 6912 11 - Live 0xdef7a000
>  ipt_limit 2304 11 - Live 0xdef3c000
>  nvidia 3695884 12 - Live 0xdf91d000
>  speedstep_lib 4228 0 - Live 0xdf46d000
>  freq_table 4612 0 - Live 0xdf46a000
>  snd_pcm_oss 59168 0 - Live 0xdf49c000
>  snd_mixer_oss 18944 1 snd_pcm_oss, Live 0xdf471000
>  snd_seq 51984 0 - Live 0xdf47b000
>  snd_seq_device 8588 1 snd_seq, Live 0xdf466000
>  button 7056 0 - Live 0xdf37a000
>  battery 10244 0 - Live 0xdf462000
>  ac 5252 0 - Live 0xdf453000
>  af_packet 21384 2 - Live 0xdf45b000
>  edd 9824 0 - Live 0xdf445000
>  joydev 9408 0 - Live 0xdf449000
>  usbhid 43616 0 - Live 0xdf419000
>  generic 4484 0 [permanent], Live 0xdf3d7000
>  ohci1394 32820 0 - Live 0xdf3e2000
>  ieee1394 97208 1 ohci1394, Live 0xdf3f2000
>  8139too 26112 0 - Live 0xdf3cd000
>  mii 5504 1 8139too, Live 0xdf380000
>  ehci_hcd 32136 0 - Live 0xdf3c4000
>  ip6t_REJECT 5504 3 - Live 0xdf37d000
>  sata_nv 9348 0 - Live 0xdf300000
>  libata 48516 1 sata_nv, Live 0xdf387000
>  scsi_mod 131304 6 st,sr_mod,sg,sd_mod,usb_storage,libata, Live 0xdf3a2000
>  ipt_REJECT 5632 3 - Live 0xdf349000
>  ipt_state 1920 25 - Live 0xdf2fe000
>  uhci_hcd 32016 0 - Live 0xdf36f000
>  pci_hotplug 26164 0 - Live 0xdf2e2000
>  snd_intel8x0 33408 1 - Live 0xdf365000
>  snd_ac97_codec 90876 1 snd_intel8x0, Live 0xdf331000
>  snd_ac97_bus 2432 1 snd_ac97_codec, Live 0xdf29a000
>  forcedeth 17920 0 - Live 0xdf2f2000
>  snd_pcm 93064 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec, Live 0xdf34d000
>  snd_timer 24452 2 snd_seq,snd_pcm, Live 0xdf2eb000
>  snd 60420 10 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer, Live 0xdf321000
>  soundcore 9184 1 snd, Live 0xdf29c000
>  snd_page_alloc 10632 2 snd_intel8x0,snd_pcm, Live 0xdf2b7000
>  ohci_hcd 20228 0 - Live 0xdf2b1000
>  usbcore 112640 6 usb_storage,usbhid,ehci_hcd,uhci_hcd,ohci_hcd, Live 0xdf304000
>  i2c_amd756 6404 0 - Live 0xdf244000
>  i2c_core 20368 1 i2c_amd756, Live 0xdf251000
>  iptable_mangle 2688 0 - Live 0xdf219000
>  nvidia_agp 7580 1 - Live 0xdf23c000
>  agpgart 33096 2 nvidia,nvidia_agp, Live 0xdf247000
>  iptable_nat 22228 2 ipt_MASQUERADE, Live 0xdf22c000
>  iptable_filter 2816 1 - Live 0xdf064000
>  ip6table_mangle 2304 0 - Live 0xde863000
>  ip_conntrack 42168 3 ipt_MASQUERADE,ipt_state,iptable_nat, Live 0xdf220000
>  ip_tables 19456 10 ipt_MASQUERADE,ipt_pkttype,ipt_TCPMSS,ipt_LOG,ipt_limit,ipt_REJECT,ipt_state,iptable_mangle,iptable_nat,iptable_filter, Live 0xdf057000
>  ip6table_filter 2688 1 - Live 0xde84f000
>  ip6_tables 18176 3 ip6t_REJECT,ip6table_mangle,ip6table_filter, Live 0xdf05e000
>  ipv6 242752 13 ip6t_REJECT, Live 0xdf258000
>  nls_utf8 2048 1 - Live 0xde861000
>  ntfs 182288 1 - Live 0xdf1e4000
>  dm_mod 54972 0 - Live 0xdf044000
>  reiserfs 250480 1 - Live 0xdf066000
>  fan 4996 0 - Live 0xde81b000
>  ide_cd 39684 0 - Live 0xde870000
>  cdrom 36896 2 sr_mod,ide_cd, Live 0xde865000
>  thermal 14472 0 - Live 0xde829000
>  processor 24252 1 thermal, Live 0xde851000
>  amd74xx 13980 0 [permanent], Live 0xde824000
>  ide_disk 17152 5 - Live 0xde81e000
>  ide_core 122380 5 usb_storage,generic,ide_cd,amd74xx,ide_disk, Live 0xdf002000
>----- /proc/modules end -----
>  used irqs: 0,2,3,4,5,6,7,8,9,11,14,15
>=========== end debug info ============
>01: None 00.0: 10105 BIOS
>  [Created at bios.154]
>  Unique ID: rdCR.lZF+r4EgHp4
>  Hardware Class: bios
>  BIOS Keyboard LED Status:
>    Scroll Lock: off
>    Num Lock: on
>    Caps Lock: off
>  Serial Port 0: 0x3f8
>  Serial Port 1: 0x2f8
>  Parallel Port 0: 0x378
>  Base Memory: 640 kB
>  PnP BIOS: PNP0C00
>  BIOS: extended read supported
>  BIOS32 Service Directory Entry: 0xf1920
>  SMBIOS Version: 2.3
>  BIOS Info: #0
>    Vendor: "Award Software, Inc."
>    Version: "ASUS A7N266-VM ACPI BIOS Rev 1006"
>    Date: "04/29/2003"
>    Start Address: 0xf0000
>    ROM Size: 256 kB
>    Features: 0x0007000000007fcbda80
>      PCI supported
>      PnP supported
>      BIOS flashable
>      BIOS shadowing allowed
>      ESCD supported
>      CD boot supported
>      Selectable boot supported
>      BIOS ROM socketed
>      EDD spec supported
>      360kB Floppy supported
>      1.2MB Floppy supported
>      720kB Floppy supported
>      2.88MB Floppy supported
>      Print Screen supported
>      8042 Keyboard Services supported
>      Serial Services supported
>      Printer Services supported
>      CGA/Mono Video supported
>      ACPI supported
>      USB Legacy supported
>      AGP supported
>  System Info: #1
>    Manufacturer: "System Manufacturer"
>    Product: "System Name"
>    Version: "System Version"
>    Serial: "SYS-1234567890"
>    UUID: undefined
>    Wake-up: 0x06 (Power Switch)
>  Board Info: #2
>    Manufacturer: "ASUSTeK Computer INC."
>    Product: "A7N266VM"
>    Version: "REV 1.xx"
>    Serial: "xxxxxxxxxxx"
>  Chassis Info: #3
>    Manufacturer: "Chassis Manufacture"
>    Version: "Chassis Version"
>    Serial: "Chassis Serial Number"
>    Asset Tag: "Asset-1234567890"
>    Type: 0x07 (Tower)
>    Bootup State: 0x03 (Safe)
>    Power Supply State: 0x03 (Safe)
>    Thermal State: 0x03 (Safe)
>    Security Status: 0x02 (Unknown)
>    OEM Info: 0x02000000
>  Processor Info: #4
>    Socket: "SOCKET A"
>    Socket Type: 0x01 (Other)
>    Socket Status: Populated
>    Type: 0x03 (CPU)
>    Family: 0x01 (Other)
>    Manufacturer: "AuthenticAMD"
>    Version: "AMD Athlon(TM) XP Processor"
>    Processor ID: 0x0383fbff00000681
>    Status: 0x01 (Enabled)
>    Voltage: 1.6 V
>    External Clock: 133 MHz
>    Max. Speed: 2000 MHz
>    Current Speed: 2000 MHz
>    L1 Cache: #8
>    L2 Cache: #9
>  Type 5 Record: #5
>    Data 00: 05 14 05 00 06 04 03 03 09 1c 00 00 05 04 02 06
>    Data 10: 00 07 00 02
>  Type 6 Record: #6
>    Data 00: 06 0c 06 00 01 01 00 00 05 08 08 00
>    String 1: "DIMM 1"
>  Type 6 Record: #7
>    Data 00: 06 0c 07 00 01 23 00 00 05 08 08 00
>    String 1: "DIMM 2"
>  Cache Info: #8
>    Designation: "L1 Cache"
>    Level: L1
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x04 (Data)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 128 kB
>    Current Size: 128 kB
>    Supported SRAM Types: 0x0020 (Synchronous)
>    Current SRAM Type: 0x0020 (Synchronous)
>  Cache Info: #9
>    Designation: "L2 Cache"
>    Level: L2
>    State: Enabled
>    Mode: 0x01 (Write Back)
>    Location: 0x00 (Internal, Not Socketed)
>    ECC: 0x02 (Unknown)
>    Type: 0x04 (Data)
>    Associativity: 0x05 (4-way Set-Associative)
>    Max. Size: 8192 kB
>    Current Size: 384 kB
>    Supported SRAM Types: 0x0030 (Pipeline Burst, Synchronous)
>    Current SRAM Type: 0x0030 (Pipeline Burst, Synchronous)
>  Port Connector: #10
>    Internal Designator: "PRIMARY IDE/HDD"
>  Port Connector: #11
>    Internal Designator: "SECONDARY IDE/HDD"
>  Port Connector: #12
>    Internal Designator: "FLOPPY"
>  Port Connector: #13
>    Type: 0x1f (Network Port)
>    External Designator: "LAN-000C6E87D8398"
>    External Connector: 0x0b (RJ-45)
>  Port Connector: #14
>    Type: 0x10 (USB)
>    External Designator: "USB1"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #15
>    Type: 0x10 (USB)
>    External Designator: "USB2"
>    External Connector: 0x12 (Access Bus [USB])
>  Port Connector: #16
>    Type: 0x0d (Keyboard Port)
>    External Designator: "PS/2 Keyboard"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #17
>    Type: 0x0e (Mouse Port)
>    External Designator: "PS/2 Mouse"
>    External Connector: 0x0f (PS/2)
>  Port Connector: #18
>    Type: 0x05 (Parallel Port ECP/EPP)
>    External Designator: "Parallel Port"
>    External Connector: 0x05 (DB-25 pin female)
>  Port Connector: #19
>    Type: 0x08 (Serial Port 16550 Compatible)
>    External Designator: "Serial Port 1"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #20
>    Type: 0x08 (Serial Port 16550 Compatible)
>    External Designator: "Serial Port 2"
>    External Connector: 0x08 (DB-9 pin male)
>  Port Connector: #21
>    Type: 0x0c (Joy Stick Port)
>    External Designator: "Joystick Port"
>    External Connector: 0x07 (DB-15 pin female)
>  Port Connector: #22
>    Type: 0x0b (MIDI Port)
>    External Designator: "MIDI Port"
>    External Connector: 0x07 (DB-15 pin female)
>  Port Connector: #23
>    Type: 0x1c (Video Port)
>    External Designator: "Video Port"
>    External Connector: 0x1f (Mini-jack [headphones])
>  System Slot: #24
>    Designation: "PCI 1"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x03 (Short)
>    Slot ID: 1
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #25
>    Designation: "PCI 2"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x04 (In Use)
>    Length: 0x03 (Short)
>    Slot ID: 2
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #26
>    Designation: "PCI 3"
>    Type: 0x06 (PCI)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x04 (In Use)
>    Length: 0x03 (Short)
>    Slot ID: 3
>    Characteristics: 0x0106 (5.0 V, 3.3 V, PME#)
>  System Slot: #27
>    Designation: "AGP"
>    Type: 0x11 (AGP 4X)
>    Bus Width: 0x05 (32 bit)
>    Status: 0x03 (Available)
>    Length: 0x03 (Short)
>    Slot ID: 4
>    Characteristics: 0x0104 (3.3 V, PME#)
>  OEM Strings: #28
>    0
>    0
>  Language Info: #29
>    Languages: en|US|iso8859-1
>    Current: en|US|iso8859-1
>  Group Associations: #30
>    Group Name: "Cpu Module"
>    Items: #4, #8, #9
>  Group Associations: #31
>    Group Name: "Memory Module Set"
>    Items: #32, #33, #36, #34, #37, #35
>  Physical Memory Array: #32
>    Use: 0x03 (System memory)
>    Location: 0x03 (Motherboard)
>    Slots: 2
>    Max. Size: 512 MB
>    ECC: 0x03 (None)
>  Memory Device: #33
>    Location: "DIMM 1"
>    Memory Array: #32
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits (+8 ECC bits)
>    Size: 256 MB
>  Memory Device: #34
>    Location: "DIMM 2"
>    Memory Array: #32
>    Error Info: No Error
>    Form Factor: 0x09 (DIMM)
>    Type: 0x03 (DRAM)
>    Type Detail: 0x0080 (Synchronous)
>    Data Width: 64 bits (+8 ECC bits)
>    Size: 256 MB
>  Memory Array Mapping: #35
>    Memory Array: #32
>    Partition Width: 3
>    Start Address: 0x00000000
>    End Address: 0x20000000
>  Memory Device Mapping: #36
>    Memory Device: #33
>    Array Mapping: #35
>    Row: 1
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x00000000
>    End Address: 0x10000000
>  Memory Device Mapping: #37
>    Memory Device: #34
>    Array Mapping: #35
>    Row: 2
>    Interleave Pos: 0
>    Interleaved Depth: 0
>    Start Address: 0x10000000
>    End Address: 0x20000000
>  Type 32 Record: #38
>    Data 00: 20 0b 26 00 00 00 00 00 00 00 00
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>02: None 00.0: 10107 System
>  [Created at sys.56]
>  Unique ID: rdCR.n_7QNeEnh23
>  Hardware Class: system
>  Model: "System"
>  Driver Info #0:
>    Driver Status: thermal,fan are active
>    Driver Activation Cmd: "modprobe thermal; modprobe fan"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>03: None 00.0: 10104 FPU
>  [Created at misc.190]
>  Unique ID: rdCR.EMpH5pjcahD
>  Hardware Class: unknown
>  Model: "FPU"
>  I/O Ports: 0xf0-0xff (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>04: None 00.0: 0801 DMA controller (8237)
>  [Created at misc.204]
>  Unique ID: rdCR.f5u1ucRm+H9
>  Hardware Class: unknown
>  Model: "DMA controller"
>  I/O Ports: 0x00-0x1f (rw)
>  I/O Ports: 0xc0-0xdf (rw)
>  I/O Ports: 0x80-0x8f (rw)
>  DMA: 4
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>05: None 00.0: 0800 PIC (8259)
>  [Created at misc.217]
>  Unique ID: rdCR.8uRK7LxiIA2
>  Hardware Class: unknown
>  Model: "PIC"
>  I/O Ports: 0x20-0x21 (rw)
>  I/O Ports: 0xa0-0xa1 (rw)
>  IRQ: 2 (no events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>06: None 00.0: 0802 Timer (8254)
>  [Created at misc.228]
>  Unique ID: rdCR.AJKleuxpiP0
>  Hardware Class: unknown
>  Model: "Timer"
>  IRQ: 0 (134524 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>07: None 00.0: 0803 RTC (Generic)
>  [Created at misc.239]
>  Unique ID: rdCR.hWmSPAStPX7
>  Hardware Class: unknown
>  Model: "RTC"
>  I/O Ports: 0x70-0x77 (rw)
>  IRQ: 8 (2 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>08: None 00.0: 0900 Keyboard controller
>  [Created at misc.249]
>  Unique ID: rdCR.9N+EecqykME
>  Hardware Class: unknown
>  Model: "Keyboard controller"
>  I/O Ports: 0x60-0x6f (rw)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>09: None 00.0: 0701 Parallel controller (SPP)
>  [Created at misc.260]
>  Unique ID: YMnp.ecK7NLYWZ5D
>  Hardware Class: unknown
>  Model: "Parallel controller"
>  Device File: /dev/lp0
>  I/O Ports: 0x378-0x37a (rw)
>  I/O Ports: 0x778-0x77a (rw)
>  DMA: 3
>  IRQ: 7 (10 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>10: None 00.0: 10400 PS/2 Controller
>  [Created at misc.302]
>  Unique ID: rdCR.DziBbWO85o5
>  Hardware Class: unknown
>  Model: "PS/2 Controller"
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>12: None 00.0: 10102 Main Memory
>  [Created at memory.59]
>  Unique ID: rdCR.CxwsZFjVASF
>  Hardware Class: memory
>  Model: "Main Memory"
>  Memory Range: 0x00000000-0x1dfebfff (rw)
>  Memory Size: 480 MB
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>13: PCI(AGP) 00.0: 0600 Host bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1a4
>  Unique ID: qLht.rCenYZhNV+3
>  SysFS ID: /devices/pci0000:00/0000:00:00.0
>  SysFS BusID: 0000:00:00.0
>  Hardware Class: bridge
>  Model: "nVidia nForce CPU bridge"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01a4 "nForce CPU bridge"
>  Revision: 0xb2
>  Driver: "agpgart-nvidia"
>  Memory Range: 0xf8000000-0xfbffffff (rw,prefetchable)
>  Module Alias: "pci:v000010DEd000001A4sv00000000sd00000000bc06sc00i00"
>  Driver Info #0:
>    Driver Status: nvidia_agp is active
>    Driver Activation Cmd: "modprobe nvidia_agp"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>14: PCI 00.1: 0500 RAM memory
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1ac
>  Unique ID: hgAj.9lHvfhabvW0
>  SysFS ID: /devices/pci0000:00/0000:00:00.1
>  SysFS BusID: 0000:00:00.1
>  Hardware Class: unknown
>  Model: "nVidia nForce 220/420 Memory Controller"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01ac "nForce 220/420 Memory Controller"
>  SubVendor: pci 0x10de "nVidia Corporation"
>  SubDevice: pci 0x0c11 
>  Revision: 0xb2
>  Module Alias: "pci:v000010DEd000001ACsv000010DEsd00000C11bc05sc00i00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>15: PCI 00.2: 0500 RAM memory
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1ad
>  Unique ID: Z+fY.g9Ef8GiIRv0
>  SysFS ID: /devices/pci0000:00/0000:00:00.2
>  SysFS BusID: 0000:00:00.2
>  Hardware Class: unknown
>  Model: "nVidia nForce 220/420 Memory Controller"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01ad "nForce 220/420 Memory Controller"
>  SubVendor: pci 0x10de "nVidia Corporation"
>  SubDevice: pci 0x0c11 
>  Revision: 0xb2
>  Module Alias: "pci:v000010DEd000001ADsv000010DEsd00000C11bc05sc00i00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>16: PCI 00.3: 0500 RAM memory
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1aa
>  Unique ID: QK9O.7wOPiYLBslF
>  SysFS ID: /devices/pci0000:00/0000:00:00.3
>  SysFS BusID: 0000:00:00.3
>  Hardware Class: unknown
>  Model: "nVidia RAM memory"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01aa 
>  SubVendor: pci 0x10de "nVidia Corporation"
>  SubDevice: pci 0x0c11 
>  Revision: 0xb2
>  Module Alias: "pci:v000010DEd000001AAsv000010DEsd00000C11bc05sc00i00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>17: PCI 01.0: 0601 ISA bridge
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1b2
>  Unique ID: vSkL.YtGS89qUkG1
>  SysFS ID: /devices/pci0000:00/0000:00:01.0
>  SysFS BusID: 0000:00:01.0
>  Hardware Class: bridge
>  Model: "nVidia nForce ISA Bridge"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01b2 "nForce ISA Bridge"
>  SubVendor: pci 0x10de "nVidia Corporation"
>  SubDevice: pci 0x0c11 
>  Revision: 0xc3
>  Module Alias: "pci:v000010DEd000001B2sv000010DEsd00000C11bc06sc01i00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>18: PCI 01.1: 0c05 SMBus
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1b4
>  Unique ID: mnDB.ipV68Dad1bF
>  SysFS ID: /devices/pci0000:00/0000:00:01.1
>  SysFS BusID: 0000:00:01.1
>  Hardware Class: unknown
>  Model: "nVidia nForce PCI System Management"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01b4 "nForce PCI System Management"
>  SubVendor: pci 0x10de "nVidia Corporation"
>  SubDevice: pci 0x0c11 
>  Revision: 0xc1
>  Driver: "amd756_smbus"
>  I/O Ports: 0x5000-0x500f (rw)
>  I/O Ports: 0x5500-0x550f (rw)
>  I/O Ports: 0x5100-0x511f (rw)
>  IRQ: 5 (39508 events)
>  Module Alias: "pci:v000010DEd000001B4sv000010DEsd00000C11bc0Csc05i00"
>  Driver Info #0:
>    Driver Status: i2c_amd756 is active
>    Driver Activation Cmd: "modprobe i2c_amd756"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>19: PCI 02.0: 0c03 USB Controller (OHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1c2_0
>  Unique ID: _Znp.ArNRaz2C74C
>  SysFS ID: /devices/pci0000:00/0000:00:02.0
>  SysFS BusID: 0000:00:02.0
>  Hardware Class: usb controller
>  Model: "nVidia nForce USB Controller"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01c2 "nForce USB Controller"
>  SubVendor: pci 0x10de "nVidia Corporation"
>  SubDevice: pci 0x0c11 
>  Revision: 0xc3
>  Driver: "ohci_hcd"
>  Memory Range: 0xef000000-0xef000fff (rw,non-prefetchable)
>  IRQ: 6 (9472 events)
>  Module Alias: "pci:v000010DEd000001C2sv000010DEsd00000C11bc0Csc03i10"
>  Driver Info #0:
>    Driver Status: ohci-hcd is active
>    Driver Activation Cmd: "modprobe ohci-hcd"
>  Driver Info #1:
>    Driver Status: ohci_hcd is active
>    Driver Activation Cmd: "modprobe ohci_hcd"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>
>20: PCI 03.0: 0c03 USB Controller (OHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1c2
>  Unique ID: 3hqH.ArNRaz2C74C
>  SysFS ID: /devices/pci0000:00/0000:00:03.0
>  SysFS BusID: 0000:00:03.0
>  Hardware Class: usb controller
>  Model: "nVidia nForce USB Controller"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01c2 "nForce USB Controller"
>  SubVendor: pci 0x10de "nVidia Corporation"
>  SubDevice: pci 0x0c11 
>  Revision: 0xc3
>  Driver: "ohci_hcd"
>  Memory Range: 0xee800000-0xee800fff (rw,non-prefetchable)
>  IRQ: 6 (9472 events)
>  Module Alias: "pci:v000010DEd000001C2sv000010DEsd00000C11bc0Csc03i10"
>  Driver Info #0:
>    Driver Status: ohci-hcd is active
>    Driver Activation Cmd: "modprobe ohci-hcd"
>  Driver Info #1:
>    Driver Status: ohci_hcd is active
>    Driver Activation Cmd: "modprobe ohci_hcd"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>
>21: PCI 04.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1c3
>  Unique ID: rBUF.otoIQKmGgwA
>  SysFS ID: /devices/pci0000:00/0000:00:04.0
>  SysFS BusID: 0000:00:04.0
>  Hardware Class: network
>  Model: "ASUSTeK nForce Ethernet Controller"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01c3 "nForce Ethernet Controller"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x0c11 
>  Revision: 0xc2
>  Driver: "forcedeth"
>  Device File: eth0
>  Memory Range: 0xee000000-0xee0003ff (rw,non-prefetchable)
>  I/O Ports: 0xd800-0xd807 (rw)
>  IRQ: 6 (9472 events)
>  HW Address: 00:0c:6e:87:d8:39
>  Link detected: yes
>  Module Alias: "pci:v000010DEd000001C3sv00001043sd00000C11bc02sc00i00"
>  Driver Info #0:
>    Driver Status: forcedeth is active
>    Driver Activation Cmd: "modprobe forcedeth"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>22: PCI 05.0: 0401 Multimedia audio controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1b0
>  Unique ID: CvwD.YBQc4OTCFa4
>  SysFS ID: /devices/pci0000:00/0000:00:05.0
>  SysFS BusID: 0000:00:05.0
>  Hardware Class: sound
>  Model: "ASUSTeK nForce Audio"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01b0 "nForce Audio"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x0c11 
>  Revision: 0xc2
>  Memory Range: 0xed800000-0xed87ffff (rw,non-prefetchable)
>  IRQ: 5 (39508 events)
>  Module Alias: "pci:v000010DEd000001B0sv00001043sd00000C11bc04sc01i00"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>23: PCI 06.0: 0401 Multimedia audio controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1b1
>  Unique ID: H0_h.bzcH8WvqVp7
>  SysFS ID: /devices/pci0000:00/0000:00:06.0
>  SysFS BusID: 0000:00:06.0
>  Hardware Class: sound
>  Model: "ASUSTeK nForce Audio"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01b1 "nForce Audio"
>  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
>  SubDevice: pci 0x8384 
>  Revision: 0xc2
>  Driver: "Intel ICH"
>  I/O Ports: 0xe100-0xe1ff (rw)
>  I/O Ports: 0xe000-0xe07f (rw)
>  Memory Range: 0xed000000-0xed000fff (rw,non-prefetchable)
>  IRQ: 11 (34105 events)
>  Module Alias: "pci:v000010DEd000001B1sv00001043sd00008384bc04sc01i00"
>  Driver Info #0:
>    Driver Status: i810_audio is not active
>    Driver Activation Cmd: "modprobe i810_audio"
>  Driver Info #1:
>    Driver Status: snd_intel8x0 is active
>    Driver Activation Cmd: "modprobe snd_intel8x0"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>
>24: PCI 08.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1b8
>  Unique ID: RE4e.TTEyza6IGpD
>  SysFS ID: /devices/pci0000:00/0000:00:08.0
>  SysFS BusID: 0000:00:08.0
>  Hardware Class: bridge
>  Model: "nVidia nForce PCI-to-PCI bridge"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01b8 "nForce PCI-to-PCI bridge"
>  Revision: 0xc2
>  Module Alias: "pci:v000010DEd000001B8sv00000000sd00000000bc06sc04i00"
>  Driver Info #0:
>    Driver Status: shpchp is not active
>    Driver Activation Cmd: "modprobe shpchp"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>25: PCI 09.0: 0101 IDE interface
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1bc
>  Unique ID: WL76.nVxm5QyYLE1
>  SysFS ID: /devices/pci0000:00/0000:00:09.0
>  SysFS BusID: 0000:00:09.0
>  Hardware Class: storage
>  Model: "nVidia nForce IDE"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01bc "nForce IDE"
>  SubVendor: pci 0x10de "nVidia Corporation"
>  SubDevice: pci 0x0c11 
>  Revision: 0xc3
>  Driver: "AMD_IDE"
>  I/O Ports: 0x9800-0x980f (rw)
>  I/O Ports: 0x1f0-0x1f7 (rw)
>  I/O Port: 0x3f6 (rw)
>  I/O Ports: 0x170-0x177 (rw)
>  I/O Port: 0x376 (rw)
>  IRQ: 14 (24279 events)
>  IRQ: 15 (8997 events)
>  Module Alias: "pci:v000010DEd000001BCsv000010DEsd00000C11bc01sc01i8a"
>  Driver Info #0:
>    Driver Status: amd74xx is active
>    Driver Activation Cmd: "modprobe amd74xx"
>  Driver Info #1:
>    Driver Status: sata_nv is active
>    Driver Activation Cmd: "modprobe sata_nv"
>  Driver Info #2:
>    Driver Status: generic is active
>    Driver Activation Cmd: "modprobe generic"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>
>26: PCI 1e.0: 0604 PCI bridge (Normal decode)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1b7
>  Unique ID: 6NW+.iwKsjRIDKL6
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0
>  SysFS BusID: 0000:00:1e.0
>  Hardware Class: bridge
>  Model: "nVidia nForce AGP to PCI Bridge"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01b7 "nForce AGP to PCI Bridge"
>  Revision: 0xb2
>  Module Alias: "pci:v000010DEd000001B7sv00000000sd00000000bc06sc04i00"
>  Driver Info #0:
>    Driver Status: shpchp is not active
>    Driver Activation Cmd: "modprobe shpchp"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>27: PCI 107.0: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3038_0
>  Unique ID: 2_DJ.22cSdGywYa2
>  Parent ID: RE4e.TTEyza6IGpD
>  SysFS ID: /devices/pci0000:00/0000:00:08.0/0000:01:07.0
>  SysFS BusID: 0000:01:07.0
>  Hardware Class: usb controller
>  Model: "VIA VT82xxxxx UHCI USB 1.1 Controller"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3038 "VT82xxxxx UHCI USB 1.1 Controller"
>  SubVendor: pci 0x1106 "VIA Technologies, Inc."
>  SubDevice: pci 0x3038 
>  Revision: 0x61
>  Driver: "uhci_hcd"
>  I/O Ports: 0xb800-0xb81f (rw)
>  IRQ: 5 (39508 events)
>  Module Alias: "pci:v00001106d00003038sv00001106sd00003038bc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>  Attached to: #24 (PCI bridge)
>
>28: PCI 107.1: 0c03 USB Controller (UHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3038
>  Unique ID: vIj8.22cSdGywYa2
>  Parent ID: RE4e.TTEyza6IGpD
>  SysFS ID: /devices/pci0000:00/0000:00:08.0/0000:01:07.1
>  SysFS BusID: 0000:01:07.1
>  Hardware Class: usb controller
>  Model: "VIA VT82xxxxx UHCI USB 1.1 Controller"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3038 "VT82xxxxx UHCI USB 1.1 Controller"
>  SubVendor: pci 0x1106 "VIA Technologies, Inc."
>  SubDevice: pci 0x3038 
>  Revision: 0x61
>  Driver: "uhci_hcd"
>  I/O Ports: 0xb400-0xb41f (rw)
>  IRQ: 5 (39508 events)
>  Module Alias: "pci:v00001106d00003038sv00001106sd00003038bc0Csc03i00"
>  Driver Info #0:
>    Driver Status: uhci-hcd is active
>    Driver Activation Cmd: "modprobe uhci-hcd"
>  Driver Info #1:
>    Driver Status: uhci_hcd is active
>    Driver Activation Cmd: "modprobe uhci_hcd"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>  Attached to: #24 (PCI bridge)
>
>29: PCI 107.2: 0c03 USB Controller (EHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3104
>  Unique ID: ndC_.EehyuzDVk+7
>  Parent ID: RE4e.TTEyza6IGpD
>  SysFS ID: /devices/pci0000:00/0000:00:08.0/0000:01:07.2
>  SysFS BusID: 0000:01:07.2
>  Hardware Class: usb controller
>  Model: "VIA USB 2.0"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3104 "USB 2.0"
>  SubVendor: pci 0x1106 "VIA Technologies, Inc."
>  SubDevice: pci 0x3104 
>  Revision: 0x63
>  Driver: "ehci_hcd"
>  Memory Range: 0xec800000-0xec8000ff (rw,non-prefetchable)
>  IRQ: 5 (39508 events)
>  Module Alias: "pci:v00001106d00003104sv00001106sd00003104bc0Csc03i20"
>  Driver Info #0:
>    Driver Status: ehci-hcd is active
>    Driver Activation Cmd: "modprobe ehci-hcd"
>  Driver Info #1:
>    Driver Status: ehci_hcd is active
>    Driver Activation Cmd: "modprobe ehci_hcd"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>  Attached to: #24 (PCI bridge)
>
>30: PCI 107.3: 0c00 FireWire (IEEE 1394) (OHCI)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_1106_3044
>  Unique ID: eyhp.CePJf9moaA8
>  Parent ID: RE4e.TTEyza6IGpD
>  SysFS ID: /devices/pci0000:00/0000:00:08.0/0000:01:07.3
>  SysFS BusID: 0000:01:07.3
>  Hardware Class: firewire controller
>  Model: "VIA IEEE 1394 Host Controller"
>  Vendor: pci 0x1106 "VIA Technologies, Inc."
>  Device: pci 0x3044 "IEEE 1394 Host Controller"
>  SubVendor: pci 0x1106 "VIA Technologies, Inc."
>  SubDevice: pci 0x3044 
>  Revision: 0x46
>  Driver: "ohci1394"
>  Memory Range: 0xec000000-0xec0007ff (rw,non-prefetchable)
>  I/O Ports: 0xb000-0xb07f (rw)
>  IRQ: 5 (39508 events)
>  Module Alias: "pci:v00001106d00003044sv00001106sd00003044bc0Csc00i10"
>  Driver Info #0:
>    Driver Status: ohci1394 is active
>    Driver Activation Cmd: "modprobe ohci1394"
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>  Attached to: #24 (PCI bridge)
>
>31: PCI 108.0: 0200 Ethernet controller
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10ec_8139
>  Unique ID: JNkJ.IQxIdIhhuH7
>  Parent ID: RE4e.TTEyza6IGpD
>  SysFS ID: /devices/pci0000:00/0000:00:08.0/0000:01:08.0
>  SysFS BusID: 0000:01:08.0
>  Hardware Class: network
>  Model: "Realtek RT8139"
>  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
>  Device: pci 0x8139 "RTL-8139/8139C/8139C+"
>  SubVendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
>  SubDevice: pci 0x8139 "RT8139"
>  Revision: 0x10
>  Driver: "8139too"
>  Device File: eth1
>  I/O Ports: 0xa800-0xa8ff (rw)
>  Memory Range: 0xeb800000-0xeb8000ff (rw,non-prefetchable)
>  IRQ: 5 (39508 events)
>  HW Address: 00:40:f4:a7:87:1c
>  Link detected: yes
>  Module Alias: "pci:v000010ECd00008139sv000010ECsd00008139bc02sc00i00"
>  Driver Info #0:
>    Driver Status: 8139too is active
>    Driver Activation Cmd: "modprobe 8139too"
>  Driver Info #1:
>    Driver Status: 8139cp is not active
>    Driver Activation Cmd: "modprobe 8139cp"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #24 (PCI bridge)
>
>32: PCI(AGP) 200.0: 0300 VGA compatible controller (VGA)
>  [Created at pci.277]
>  UDI: /org/freedesktop/Hal/devices/pci_10de_1a0
>  Unique ID: B35A.Q_T+JOxebUF
>  Parent ID: 6NW+.iwKsjRIDKL6
>  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:00.0
>  SysFS BusID: 0000:02:00.0
>  Hardware Class: graphics card
>  Model: "nVidia GeForce2 Integrated GPU"
>  Vendor: pci 0x10de "nVidia Corporation"
>  Device: pci 0x01a0 "GeForce2 Integrated GPU"
>  SubVendor: pci 0x10de "nVidia Corporation"
>  SubDevice: pci 0x0c11 
>  Revision: 0xb1
>  Driver: "nvidia"
>  Memory Range: 0xea000000-0xeaffffff (rw,non-prefetchable)
>  Memory Range: 0xf0000000-0xf7ffffff (rw,prefetchable)
>  Memory Range: 0xefff0000-0xefffffff (ro,prefetchable,disabled)
>  IRQ: 11 (34105 events)
>  I/O Ports: 0x3c0-0x3df (rw)
>  Module Alias: "pci:v000010DEd000001A0sv000010DEsd00000C11bc03sc00i00"
>  Driver Info #0:
>    XFree86 v4 Server Module: nv
>  Driver Info #1:
>    XFree86 v4 Server Module: nvidia
>    3D Support: yes
>    Color Depths: 16
>    Extensions: 
>    Options: 
>  Config Status: cfg=yes, avail=yes, need=yes, active=unknown
>  Attached to: #26 (PCI bridge)
>
>33: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c01
>  Unique ID: z9pp.gNN83gfynbD
>  SysFS ID: /devices/pnp0/00:00
>  SysFS BusID: 00:00
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c01 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>34: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_2
>  Unique ID: QL3u.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:01
>  SysFS BusID: 00:01
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>35: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_1
>  Unique ID: tWJy.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:02
>  SysFS BusID: 00:02
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>36: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02_0
>  Unique ID: KiZ0.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:03
>  SysFS BusID: 00:03
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>37: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0200
>  Unique ID: ntp4.ld94kxNGZf5
>  SysFS ID: /devices/pnp0/00:04
>  SysFS BusID: 00:04
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0200 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>38: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0b00
>  Unique ID: E349.WYwRElrJa93
>  SysFS ID: /devices/pnp0/00:05
>  SysFS BusID: 00:05
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0b00 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>39: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0800
>  Unique ID: hEKD.bvKf3UMzZfE
>  SysFS ID: /devices/pnp0/00:06
>  SysFS BusID: 00:06
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0800 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>40: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c04
>  Unique ID: NhVi.DE8RM9cWQQ8
>  SysFS ID: /devices/pnp0/00:07
>  SysFS BusID: 00:07
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c04 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>41: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0401
>  Unique ID: qslm.YgT1Hy0M6x6
>  SysFS ID: /devices/pnp0/00:08
>  SysFS BusID: 00:08
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0401 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>42: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_0
>  Unique ID: H20r.BuKI+1soRmD
>  SysFS ID: /devices/pnp0/00:09
>  SysFS BusID: 00:09
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0501 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>43: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501
>  Unique ID: iT2w.BuKI+1soRmD
>  SysFS ID: /devices/pnp0/00:0a
>  SysFS BusID: 00:0a
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0501 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>44: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0c02
>  Unique ID: 9fI_.B+yZ9Ve8gC1
>  SysFS ID: /devices/pnp0/00:0b
>  SysFS BusID: 00:0b
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0x0c02 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>45: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNPb006
>  Unique ID: cqY2.JQoV6gLWtL4
>  SysFS ID: /devices/pnp0/00:0c
>  SysFS BusID: 00:0c
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0xb006 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>46: ISA(PnP) 00.0: 0000 Unclassified device
>  [Created at isapnp.147]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNPb02f
>  Unique ID: 30p6.SkuAEd7r8M4
>  SysFS ID: /devices/pnp0/00:0d
>  SysFS BusID: 00:0d
>  Hardware Class: unknown
>  Model: "PnP Unclassified device"
>  SubVendor: PNP "PnP"
>  SubDevice: eisa 0xb02f 
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>47: None 00.0: 0700 Serial controller (16550)
>  [Created at serial.73]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_0_serial_platform_0
>  Unique ID: S_Uw.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS0
>  I/O Ports: 0x3f8-0x3ff (rw)
>  IRQ: 4 (18 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>48: None 00.1: 0700 Serial controller (16550)
>  [Created at serial.73]
>  UDI: /org/freedesktop/Hal/devices/pnp_PNP0501_serial_platform_1
>  Unique ID: v9l_.3fyvFV+mbWD
>  Hardware Class: unknown
>  Model: "16550A"
>  Device: "16550A"
>  Device File: /dev/ttyS1
>  I/O Ports: 0x2f8-0x2ff (rw)
>  IRQ: 3 (20 events)
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>
>49: IDE 00.0: 10600 Disk
>  [Created at block.188]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_S013J10WB36015
>  Unique ID: l_yX.pT+IO2DTZs4
>  Parent ID: WL76.nVxm5QyYLE1
>  SysFS ID: /block/hda
>  SysFS BusID: 0.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ide0/0.0
>  Hardware Class: disk
>  Model: "SAMSUNG SP1604N"
>  Vendor: "SAMSUNG"
>  Device: "SP1604N"
>  Revision: "TM100-23"
>  Serial ID: "S013J10WB36015"
>  Driver: "AMD_IDE", "ide-disk", "ide-disk"
>  Device File: /dev/disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015
>  Device Files: /dev/hda, /dev/disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015, /dev/disk/by-path/pci-0000:00:09.0-ide-0:0
>  Device Number: block 3:0-3:63
>  BIOS id: 0x80
>  Geometry (Logical): CHS 19457/255/63
>  Size: 312581808 sectors a 512 bytes
>  Geometry (BIOS EDD): CHS 310101/16/63
>  Size (BIOS EDD): 312581808 sectors
>  Geometry (BIOS Legacy): CHS 1024/255/63
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #25 (IDE interface)
>
>50: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_part1_size_995226624
>  Unique ID: 0fbI.SE1wIdpsiiC
>  Parent ID: l_yX.pT+IO2DTZs4
>  SysFS ID: /block/hda/hda1
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015-part1
>  Device Files: /dev/hda1, /dev/disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015-part1, /dev/disk/by-path/pci-0000:00:09.0-ide-0:0-part1
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #49 (Disk)
>
>51: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_f37ee927_92aa_47ee_a279_fd4c9dc5438e
>  Unique ID: TqrM.SE1wIdpsiiC
>  Parent ID: l_yX.pT+IO2DTZs4
>  SysFS ID: /block/hda/hda2
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015-part2
>  Device Files: /dev/hda2, /dev/disk/by-id/ata-SAMSUNG_SP1604N_S013J10WB36015-part2, /dev/disk/by-path/pci-0000:00:09.0-ide-0:0-part2, /dev/disk/by-uuid/f37ee927-92aa-47ee-a279-fd4c9dc5438e
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #49 (Disk)
>
>52: IDE 01.0: 10600 Disk
>  [Created at block.188]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_5GC0YPFW
>  Unique ID: u0Ql.nIuVdwtgHf9
>  Parent ID: WL76.nVxm5QyYLE1
>  SysFS ID: /block/hdb
>  SysFS BusID: 0.1
>  SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ide0/0.1
>  Hardware Class: disk
>  Model: "ST380020A"
>  Device: "ST380020A"
>  Revision: "3.39"
>  Serial ID: "5GC0YPFW"
>  Driver: "AMD_IDE", "ide-disk", "ide-disk"
>  Device File: /dev/disk/by-id/ata-ST380020A_5GC0YPFW
>  Device Files: /dev/hdb, /dev/disk/by-id/ata-ST380020A_5GC0YPFW, /dev/disk/by-path/pci-0000:00:09.0-ide-0:1
>  Device Number: block 3:64-3:127
>  BIOS id: 0x81
>  Geometry (Logical): CHS 155061/16/63
>  Size: 156301488 sectors a 512 bytes
>  Geometry (BIOS EDD): CHS 155061/16/63
>  Size (BIOS EDD): 156301488 sectors
>  Geometry (BIOS Legacy): CHS 1024/255/63
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #25 (IDE interface)
>
>53: None 00.0: 11300 Partition
>  [Created at block.357]
>  UDI: /org/freedesktop/Hal/devices/volume_uuid_F0E0783FE0780E5A
>  Unique ID: 66wj.SE1wIdpsiiC
>  Parent ID: u0Ql.nIuVdwtgHf9
>  SysFS ID: /block/hdb/hdb1
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/disk/by-id/ata-ST380020A_5GC0YPFW-part1
>  Device Files: /dev/hdb1, /dev/disk/by-id/ata-ST380020A_5GC0YPFW-part1, /dev/disk/by-path/pci-0000:00:09.0-ide-0:1-part1, /dev/disk/by-uuid/F0E0783FE0780E5A, /dev/disk/by-label/WINXP
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #52 (Disk)
>
>54: IDE 02.0: 10602 CD-ROM (DVD-R)
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_serial_DL100526036668
>  Unique ID: 90A1.i_ksLhSq+k4
>  Parent ID: WL76.nVxm5QyYLE1
>  SysFS ID: /block/hdc
>  SysFS BusID: 1.0
>  SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ide1/1.0
>  Hardware Class: cdrom
>  Model: "PHILIPS PBDV16LSP1"
>  Vendor: "PHILIPS"
>  Device: "PBDV16LSP1"
>  Revision: "B1.8"
>  Serial ID: "DL100526036668"
>  Driver: "AMD_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/disk/by-id/ata-PHILIPS_PBDV16LSP1_DL100526036668
>  Device Files: /dev/hdc, /dev/disk/by-id/ata-PHILIPS_PBDV16LSP1_DL100526036668, /dev/disk/by-path/pci-0000:00:09.0-ide-1:0, /dev/dvdrecorder, /dev/cdrom, /dev/dvd, /dev/cdrecorder
>  Device Number: block 22:0
>  Features: CD-R, CD-RW, DVD, DVD-R
>  Size: 0 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>  Attached to: #25 (IDE interface)
>  Drive Speed: 40
>
>55: IDE 03.0: 10602 CD-ROM (DVD-R)
>  [Created at block.192]
>  UDI: /org/freedesktop/Hal/devices/storage_model_PHILIPS_DVDR1640P
>  Unique ID: cBQ5.1hZPFe115N7
>  Parent ID: WL76.nVxm5QyYLE1
>  SysFS ID: /block/hdd
>  SysFS BusID: 1.1
>  SysFS Device Link: /devices/pci0000:00/0000:00:09.0/ide1/1.1
>  Hardware Class: cdrom
>  Model: "PHILIPS DVDR1640P"
>  Vendor: "PHILIPS"
>  Device: "DVDR1640P"
>  Revision: "P3.4"
>  Serial ID: ""
>  Driver: "AMD_IDE", "ide-cdrom", "ide-cdrom"
>  Device File: /dev/disk/by-path/pci-0000:00:09.0-ide-1:1
>  Device Files: /dev/hdd, /dev/disk/by-path/pci-0000:00:09.0-ide-1:1, /dev/dvdrecorder2
>  Device Number: block 22:64
>  Features: CD-R, CD-RW, DVD, DVD-R
>  Size: 0 sectors a 512 bytes
>  Drive status: no medium
>  Config Status: cfg=yes, avail=yes, need=no, active=unknown
>  Attached to: #25 (IDE interface)
>  Drive Speed: 40
>
>56: SCSI d00.0: 10600 Disk
>  [Created at block.188]
>  Unique ID: n2I9.ZGmms3QDCAA
>  Parent ID: ndC_.EehyuzDVk+7
>  SysFS ID: /block/sda
>  SysFS BusID: 13:0:0:0
>  SysFS Device Link: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-4/5-4:1.0/host13/target13:0:0/13:0:0:0
>  Hardware Class: disk
>  Model: "HDS72251 6VLAT20"
>  Vendor: usb 0x07ab "HDS72251"
>  Device: usb 0xfccd "6VLAT20"
>  Revision: "V34O"
>  Serial ID: "FW436_0B29140042F9AA27"
>  Driver: "usb-storage", "sd"
>  Device File: /dev/sda (/dev/sg0)
>  Device Number: block 8:0-8:15 (char 21:0)
>  Speed: 480 Mbps
>  Module Alias: "usb:v07ABpFCCDd0436dc00dsc00dp00ic08isc06ip50"
>  Driver Info #0:
>    Driver Status: usb_storage is active
>    Driver Activation Cmd: "modprobe usb_storage"
>  Drive status: no medium
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #29 (USB Controller)
>
>57: None 00.0: 11300 Partition
>  [Created at block.357]
>  Unique ID: 1tKY.SE1wIdpsiiC
>  Parent ID: n2I9.ZGmms3QDCAA
>  SysFS ID: /block/sda/sda1
>  Hardware Class: partition
>  Model: "Partition"
>  Device File: /dev/sda1
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #56 (Disk)
>
>58: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_02_0_if0
>  Unique ID: k4bc.Qlf7dkuQmR7
>  Parent ID: _Znp.ArNRaz2C74C
>  SysFS ID: /devices/pci0000:00/0000:00:02.0/usb1/1-0:1.0
>  SysFS BusID: 1-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-15-default ohci_hcd OHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-15-default ohci_hcd"
>  Device: "OHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:02.0"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #19 (USB Controller)
>
>59: USB 00.0: 10800 Keyboard
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if0_logicaldev_input
>  Unique ID: ADDn.72gTp8lQCQ2
>  Parent ID: k4bc.Qlf7dkuQmR7
>  SysFS ID: /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0
>  SysFS BusID: 1-1:1.0
>  Hardware Class: keyboard
>  Model: "Logitech USB Receiver"
>  Hotplug: USB
>  Vendor: usb 0x046d "Logitech Inc."
>  Device: usb 0xc512 "USB Receiver"
>  Revision: "39.00"
>  Driver: "usbhid"
>  Device File: /dev/input/event1
>  Device Number: char 13:65
>  Speed: 1.5 Mbps
>  Module Alias: "usb:v046DpC512d3900dc00dsc00dp00ic03isc01ip01"
>  Driver Info #0:
>    XkbRules: xfree86
>    XkbModel: pc104
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #58 (Hub)
>
>60: USB 00.1: 10503 USB Mouse
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_46d_c512_noserial_if1_logicaldev_input
>  Unique ID: dOTr.vf20J6yY7Q9
>  Parent ID: k4bc.Qlf7dkuQmR7
>  SysFS ID: /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.1
>  SysFS BusID: 1-1:1.1
>  Hardware Class: mouse
>  Model: "Logitech USB Receiver"
>  Hotplug: USB
>  Vendor: usb 0x046d "Logitech Inc."
>  Device: usb 0xc512 "USB Receiver"
>  Revision: "39.00"
>  Compatible to: int 0x0210 0x0028
>  Driver: "usbhid"
>  Device File: /dev/input/mice (/dev/input/mouse0)
>  Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event2
>  Device Number: char 13:63 (char 13:32)
>  Speed: 1.5 Mbps
>  Module Alias: "usb:v046DpC512d3900dc00dsc00dp00ic03isc01ip02"
>  Driver Info #0:
>    Buttons: 8
>    Wheels: 2
>    XFree86 Protocol: explorerps/2
>    GPM Protocol: exps2
>  Config Status: cfg=new, avail=yes, need=no, active=unknown
>  Attached to: #58 (Hub)
>
>61: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_00_03_0_if0
>  Unique ID: pBe4.xmy9886Cz2A
>  Parent ID: 3hqH.ArNRaz2C74C
>  SysFS ID: /devices/pci0000:00/0000:00:03.0/usb2/2-0:1.0
>  SysFS BusID: 2-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-15-default ohci_hcd OHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-15-default ohci_hcd"
>  Device: "OHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:00:03.0"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #20 (USB Controller)
>
>62: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_0_if0
>  Unique ID: uIhY.aVOFV7U5Z2E
>  Parent ID: 2_DJ.22cSdGywYa2
>  SysFS ID: /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-0:1.0
>  SysFS BusID: 3-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-15-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-15-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:01:07.0"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #27 (USB Controller)
>
>63: USB 00.0: 10c00 Scanner
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_4a9_220e_noserial_if0
>  Unique ID: mZxt.e0BXa1UqUPA
>  Parent ID: uIhY.aVOFV7U5Z2E
>  SysFS ID: /devices/pci0000:00/0000:00:08.0/0000:01:07.0/usb3/3-2/3-2:1.0
>  SysFS BusID: 3-2:1.0
>  Hardware Class: scanner
>  Model: "Canon CanoScan"
>  Hotplug: USB
>  Vendor: usb 0x04a9 "Canon"
>  Device: usb 0x220e "CanoScan"
>  Revision: "1.00"
>  Speed: 12 Mbps
>  Module Alias: "usb:v04A9p220Ed0100dcFFdsc00dpFFic*isc*ip*"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #62 (Hub)
>
>64: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_1_if0
>  Unique ID: zPk0.LETqstGpVK5
>  Parent ID: vIj8.22cSdGywYa2
>  SysFS ID: /devices/pci0000:00/0000:00:08.0/0000:01:07.1/usb4/4-0:1.0
>  SysFS BusID: 4-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-15-default uhci_hcd UHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-15-default uhci_hcd"
>  Device: "UHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:01:07.1"
>  Driver: "hub"
>  Speed: 12 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic*isc*ip*"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #28 (USB Controller)
>
>65: USB 00.0: 10a00 Hub
>  [Created at usb.122]
>  UDI: /org/freedesktop/Hal/devices/usb_device_0_0_0000_01_07_2_if0
>  Unique ID: 2XnU.cU_MwUzaxGD
>  Parent ID: ndC_.EehyuzDVk+7
>  SysFS ID: /devices/pci0000:00/0000:00:08.0/0000:01:07.2/usb5/5-0:1.0
>  SysFS BusID: 5-0:1.0
>  Hardware Class: hub
>  Model: "Linux 2.6.13-15-default ehci_hcd EHCI Host Controller"
>  Hotplug: USB
>  Vendor: "Linux 2.6.13-15-default ehci_hcd"
>  Device: "EHCI Host Controller"
>  Revision: "2.06"
>  Serial ID: "0000:01:07.2"
>  Driver: "hub"
>  Speed: 480 Mbps
>  Module Alias: "usb:v0000p0000d0206dc09dsc00dp01ic*isc*ip*"
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #29 (USB Controller)
>
>67: None 00.0: 10103 CPU
>  [Created at cpu.290]
>  Unique ID: rdCR.j8NaKXDZtZ6
>  Hardware Class: cpu
>  Arch: Intel
>  Vendor: "AuthenticAMD"
>  Model: 6.8.1 "AMD Athlon(TM) XP 2400+"
>  Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse,syscall,mmxext,3dnowext,3dnow
>  Clock: 1995 MHz
>  Cache: 256 kb
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>68: None 00.0: 10000 Monitor
>  [Created at fb.70]
>  Unique ID: rdCR.EY_qmtb9YY0
>  Hardware Class: monitor
>  Model: "Generic Monitor"
>  Vendor: "Generic"
>  Device: "Monitor"
>  Resolution: 1024x768@76Hz
>  Driver Info #0:
>    Max. Resolution: 1024x768
>    Vert. Sync Range: 50-90 Hz
>    Hor. Sync Range: 31-61 kHz
>  Config Status: cfg=yes, avail=yes, need=yes, active=unknown
>
>69: None 00.0: 10701 Ethernet
>  [Created at net.111]
>  UDI: /org/freedesktop/Hal/devices/net_00_0c_6e_87_d8_39
>  Unique ID: usDW.ndpeucax6V1
>  Parent ID: rBUF.otoIQKmGgwA
>  SysFS ID: /class/net/eth0
>  SysFS Device Link: /devices/pci0000:00/0000:00:04.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "forcedeth"
>  Device File: eth0
>  HW Address: 00:0c:6e:87:d8:39
>  Link detected: yes
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #21 (Ethernet controller)
>
>70: None 01.0: 10701 Ethernet
>  [Created at net.111]
>  UDI: /org/freedesktop/Hal/devices/net_00_40_f4_a7_87_1c
>  Unique ID: L2Ua.ndpeucax6V1
>  Parent ID: JNkJ.IQxIdIhhuH7
>  SysFS ID: /class/net/eth1
>  SysFS Device Link: /devices/pci0000:00/0000:00:08.0/0000:01:08.0
>  Hardware Class: network interface
>  Model: "Ethernet network interface"
>  Driver: "8139too"
>  Device File: eth1
>  HW Address: 00:40:f4:a7:87:1c
>  Link detected: yes
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>  Attached to: #31 (Ethernet controller)
>
>71: None 00.0: 10700 Loopback
>  [Created at net.111]
>  Unique ID: ZsBS.GQNx7L4uPNA
>  SysFS ID: /class/net/lo
>  Hardware Class: network interface
>  Model: "Loopback network interface"
>  Device File: lo
>  Link detected: yes
>  Config Status: cfg=no, avail=yes, need=no, active=unknown
>
>72: None 00.0: 10781 Network Interface
>  [Created at net.111]
>  Unique ID: wl2P.nfEXJulusj6
>  SysFS ID: /class/net/sit0
>  Hardware Class: network interface
>  Model: "Network Interface"
>  Device File: sit0
>  Config Status: cfg=no, avail=yes, need=no, active=unknown

Actions: View

Attachments on bug 132500: 57288