Bugzilla – Attachment 57307 Details for
Bug 133118
cd burning broken in suse linux 10.0
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
extract of cdrecord output
test-cdrec.txt (text/plain), 2.73 KB, created by
Forgotten User LQbRipXdCY
on 2005-11-14 21:02:08 UTC
(
hide
)
Description:
extract of cdrecord output
Filename:
MIME Type:
Creator:
Forgotten User LQbRipXdCY
Created:
2005-11-14 21:02:08 UTC
Size:
2.73 KB
patch
obsolete
>cdrecord -v -V -dummy speed=0 dev=/dev/hdd burn.iso > >output: >... >Executing 'mode select g1' command on Bus 1 Target 1, Lun 0 timeout 40s >CDB: 55 10 00 00 00 00 00 00 3C 00 >cmd finished after 0.001s timeout 40s >Set Set Set Set Set Set Set Set Set Set Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). >Driver flags : MMC-2 SWABAUDIO BURNFREE >Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R > >Executing 'read buffer cap' command on Bus 1 Target 1, Lun 0 timeout 40s >CDB: 5C 00 00 00 00 00 00 00 0C 00 >cmd finished after 0.000s timeout 40s >BFree: 1764 K BSize: 1764 K >Drive buf size : 1806336 = 1764 KB > >Executing 'read buffer' command on Bus 1 Target 1, Lun 0 timeout 40s >CDB: 3C 00 00 00 00 00 00 00 04 00 >cmd finished after 0.000s timeout 40s > >Executing 'read buffer' command on Bus 1 Target 1, Lun 0 timeout 40s >CDB: 3C 00 00 00 00 00 00 FC 00 00 >resid: 64512 >cmd finished after 0.000s timeout 40s > >Executing 'read buffer' command on Bus 1 Target 1, Lun 0 timeout 40s >CDB: 3C 00 00 00 00 00 00 FC 00 00 >cmd finished after 0.011s timeout 40s > >Executing 'read buffer' command on Bus 1 Target 1, Lun 0 timeout 40s >CDB: 3C 00 00 00 00 00 00 FC 00 00 >cdrecord: Success. read buffer: scsi sendcmd: no error >CDB: 3C 00 00 00 00 00 00 FC 00 00 >status: 0x5 (CONDITION MET/GOOD) >resid: 64512 >cmd finished after 5.460s timeout 40s >FIFO size : 4194304 = 4096 KB >Track 01: data 5 MB >Total size: 6 MB (00:40.09) = 3007 sectors >Lout start: 7 MB (00:42/07) = 3007 sectors > >Executing 'test unit ready' command on Bus 1 Target 1, Lun 0 timeout 40s >CDB: 00 00 00 00 00 00 >cdrecord: Success. test unit ready: scsi sendcmd: no error >CDB: 00 00 00 00 00 00 >status: 0x5 (CONDITION MET/GOOD) >cmd finished after 100.930s timeout 40s > >Executing 'start/stop unit' command on Bus 1 Target 1, Lun 0 timeout 40s >CDB: 1B 00 00 00 03 00 >cdrecord: Success. start/stop unit: scsi sendcmd: no error >CDB: 1B 00 00 00 03 00 >status: 0x5 (CONDITION MET/GOOD) >cmd finished after 100.930s timeout 40s > >Executing 'test unit ready' command on Bus 1 Target 1, Lun 0 timeout 40s >CDB: 00 00 00 00 00 00 > >then command hangs and issues messages in /var/log/messages: >Nov 14 20:59:25 athlon kernel: hdd: irq timeout: status=0xd0 { Busy } >Nov 14 20:59:25 athlon kernel: ide: failed opcode was: unknown >Nov 14 20:59:25 athlon kernel: hdd: ATAPI reset complete >Nov 14 20:59:25 athlon kernel: hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error } >Nov 14 20:59:25 athlon kernel: hdd: request sense failure: error=0x50 { LastFailedSense=0x05 } >Nov 14 20:59:25 athlon kernel: hdd: request sense failure: status=0x51 { DriveReady SeekComplete Error } >Nov 14 20:59:25 athlon kernel: hdd: request sense failure: error=0x50 { LastFailedSense=0x05 } > >
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 133118
:
57304
|
57305
| 57307 |
96233