Attachment 57764 Details for Bug 121955

Dmesg with patch and apic

dmesg_with_patch (text/plain), 20.23 KB, created by Frank Fischer on 2005-11-18 21:55:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Frank Fischer

Created: 2005-11-18 21:55:58 UTC

Size: 20.23 KB

patch

obsolete

>Linux version 2.6.13-15-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #5 Fri Oct 14 04:00:48 CEST 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fe80000 (usable)
> BIOS-e820: 000000001fe80000 - 000000001fe89000 (ACPI data)
> BIOS-e820: 000000001fe89000 - 000000001ff00000 (ACPI NVS)
> BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>510MB LOWMEM available.
>On node 0 totalpages: 130688
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126592 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f68d0
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1fe80e14
>ACPI: FADT (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1fe88e8a
>ACPI: MADT (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1fe88efe
>ACPI: HPET (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1fe88f64
>ACPI: MCFG (v001 INTEL  ALVISO   0x06040000 LOHR 0x0000005f) @ 0x1fe88f9c
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1fe88fd8
>ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20030224) @ 0x1fe81249
>ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1fe81071
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030224) @ 0x1fe80e58
>ACPI: DSDT (v001 INTEL  ALVISO   0x06040000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1 already used, trying 2
>IOAPIC[0]: apic_id 1 already used, trying 3
>IOAPIC[0]: apic_id 3, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x02] address[0xfec20000] gsi_base[24])
>IOAPIC[1]: apic_id 2 already used, trying 4
>IOAPIC[1]: Unable change apic_id!
>IOAPIC[1]: apic_id 2 already used, trying 5
>IOAPIC[1]: Unable change apic_id!
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda6 vga=0x314 selinux=0 resume=/dev/sda7 splash=silent apic
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1596.289 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 512464k/522752k available (2028k kernel code, 9612k reserved, 700k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3196.79 BogoMIPS (lpj=6393581)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1742k freed
>ACPI: Looking for DSDT in initramfs... found /DSDT.aml ... successfully read 27788 bytes from /DSDT.aml
>ACPI: Using customized DSDT
>    ACPI-0306: *** Info: Table [DSDT] replaced by host OS
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd6ce, last bus=8
>PCI: Using MMCONFIG
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: Embedded Controller [EC0] (gpe 29)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
>PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
>PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>    ACPI-0077: *** Warning: No context for object [dfe6b880]
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: c8100000-c81fffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 7, cardbus bridge: 0000:06:09.0
>  IO window: 00003000-00003fff
>  IO window: 00004000-00004fff
>  PREFETCH window: 20000000-21ffffff
>  MEM window: 22000000-23ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-4fff
>  MEM window: c8200000-c82fffff
>  PREFETCH window: 20000000-21ffffff
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>PCI: Device 0000:00:1c.0 not available because of resource collisions
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>PCI: Device 0000:00:1c.1 not available because of resource collisions
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>PCI: Device 0000:00:1c.2 not available because of resource collisions
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 177
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1132345170.560:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>PCI: Device 0000:00:1c.0 not available because of resource collisions
>PCI: Device 0000:00:1c.1 not available because of resource collisions
>PCI: Device 0000:00:1c.2 not available because of resource collisions
>vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 3750k, total 16384k
>vesafb: mode is 800x600x16, linelength=1600, pages=16
>vesafb: protected mode interface info at c000:ad8c
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 51518 bytes,<6>...found (800x600, 8809 bytes, v3).
>Console: switching to colour frame buffer device 99x34
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
>pnp: Device 00:07 activated.
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>AZAL RP01 RP02 RP04 USB1 USB2 USB3 USB4 USB7 LANC 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>SCSI subsystem initialized
>libata version 1.12 loaded.
>ahci version 1.01
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 201
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ahci: probe of 0000:00:1f.2 failed with error -12
>ata_piix version 1.04
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18A0 irq 14
>input: AT Translated Set 2 keyboard on isa0060/serio0
>ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3d48 87:4023 88:203f
>ata1: dev 0 ATA, max UDMA/100, 156301488 sectors: lba48
>ata1(0): applying bridge limits
>ata1: dev 0 configured for UDMA/100
>scsi0 : ata_piix
>  Vendor: ATA       Model: IC25N080ATMR04-0  Rev: MO4O
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18A8 irq 15
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>ata2: dev 0 cfg 49:0f00 82:421c 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
>ata2: dev 0 ATAPI, max UDMA/33
>ata2(0): applying bridge limits
>ata2: dev 0 configured for UDMA/33
>scsi1 : ata_piix
>  Vendor: HL-DT-ST  Model: DVDRAM GMA-4080N  Rev: 0H35
>  Type:   CD-ROM                             ANSI SCSI revision: 05
>Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>    ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x1
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
>ACPI: Thermal Zone [THRM] (22 C)
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: sda6: found reiserfs format "3.6" with standard journal
>ReiserFS: sda6: using ordered data mode
>ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda6: checking transaction log (sda6)
>ReiserFS: sda6: Using r5 hash to sort names
>udev[2290]: run_program: open /dev/null failed
>udev[2290]: run_program: exec of program '/sbin/modprobe' failed
>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 1052216k swap on /dev/sda7.  Priority:42 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>ReiserFS: sda8: found reiserfs format "3.6" with standard journal
>ReiserFS: sda8: using ordered data mode
>ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda8: checking transaction log (sda8)
>ReiserFS: sda8: Using r5 hash to sort names
>pnp: Device 00:08 activated.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>tg3.c:v3.37 (August 25, 2005)
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 16 (level, low) -> IRQ 169
>eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:83:1b:62
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] 
>eth0: dma_rwctrl[763f0000]
>lp0: using parport0 (interrupt-driven).
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2002 Netfilter core team
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (4084 buckets, 32672 max) - 248 bytes per conntrack
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>hw_random: RNG not detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 209, io base 0x00001800
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 201, io base 0x00001820
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 177, io base 0x00001840
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001860
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 209, io mem 0xc8004000
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, 1.0.3
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 19 (level, low) -> IRQ 201
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201]  MMIO=[c8215000-c82157ff]  Max Packet=[2048]
>ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 18 (level, low) -> IRQ 177
>Yenta: CardBus bridge found at 0000:06:09.0 [1025:0070]
>Yenta O2: res at 0x94/0xD4: ea/00
>Yenta O2: enabling read prefetch/write burst
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 17 (level, low) -> IRQ 217
>ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
>Yenta: ISA IRQ mask 0x0438, PCI irq 177
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x4fff
>cs: IO port probe 0x3000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc8200000 - 0xc82fffff
>pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
>Yenta: no bus associated with 0000:06:09.1!
>Yenta: no bus associated with 0000:06:09.3!
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f0000423950]
>cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: excluding 0x370-0x37f
>cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>bootsplash: status on console 0 changed to on
>NET: Registered protocol family 17
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.0.0 20040925
>eth1: no IPv6 routers present
>bootsplash: status on console 0 changed to on
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>bootsplash: status on console 0 changed to on
>subfs 0.9
>ISO 9660 Extensions: Microsoft Joliet Level 1
>ISOFS: changing to secondary root
>ieee80211_crypt: registered algorithm 'CCMP'
>Bluetooth: Core ver 2.7
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized

Actions: View

Attachments on bug 121955: 57764 | 57765 | 57766 | 57767 | 57869 | 58143