Attachment 58791 Details for Bug 135615

boot log

boot.msg (text/plain), 31.69 KB, created by Lars Müller on 2005-11-27 18:27:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Lars Müller

Created: 2005-11-27 18:27:59 UTC

Size: 31.69 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.14.2-3-default
>Loaded 22292 symbols from /boot/System.map-2.6.14.2-3-default.
>Symbols match kernel version 2.6.14.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.14.2-3-default (geeko@buildhost) (gcc version 4.1.0 20051116 (experimental) (SUSE Linux)) #1 Fri Nov 18 15:22:13 UTC 2005
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000002fedc000 (usable)
><4> BIOS-e820: 000000002fedc000 - 0000000030000000 (reserved)
><4> BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
><4> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
><5>0MB HIGHMEM available.
><5>766MB LOWMEM available.
><7>On node 0 totalpages: 196316
><7>  DMA zone: 4096 pages, LIFO batch:1
><7>  Normal zone: 192220 pages, LIFO batch:31
><7>  HighMem zone: 0 pages, LIFO batch:1
><6>DMI 2.3 present.
><7>ACPI: RSDP (v000 DELL                                  ) @ 0x000fde50
><7>ACPI: RSDT (v001 DELL    CPi R   0x27d40301 ASL  0x00000061) @ 0x000fde64
><7>ACPI: FADT (v001 DELL    CPi R   0x27d40301 ASL  0x00000061) @ 0x000fde90
><7>ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
><6>ACPI: PM-Timer IO Port: 0x808
><6>ACPI: local apic disabled
><4>Allocating PCI resources starting at 40000000 (gap: 30000000:ceda0000)
><4>Built 1 zonelists
><5>Kernel command line: root=/dev/hda1 vga=0x305 desktop resume=/dev/hda2 nmi_watchdog=2
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 65536 bytes)
><4>Detected 797.438 MHz processor.
><6>Using pmtmr for high-res timesource
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 773040k/785264k available (1776k kernel code, 11588k reserved, 630k data, 204k init, 0k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 1596.19 BogoMIPS (lpj=3192385)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Disabled at boot.
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
><7>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
><6>CPU: L1 I cache: 16K, L1 D cache: 16K
><6>CPU: L2 cache: 512K
><7>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>mtrr: v2.0 (20020519)
><4>CPU: Intel(R) Pentium(R) III Mobile CPU      1200MHz stepping 01
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Checking 'hlt' instruction... OK.
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 1594k freed
><4> not found!
><4>ACPI: setting ELCR to 0200 (from 0800)
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xfc00e, last bus=2
><6>PCI: Using configuration type 1
><6>ACPI: Subsystem revision 20050902
><6>ACPI: Interpreter enabled
><6>ACPI: Using PIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><4>PCI: Probing PCI hardware (bus 00)
><6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
><7>Boot video device is 0000:00:02.0
><4>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
><4>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
><6>ACPI: Power Resource [PADA] (on)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 18 devices
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><6>pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
><6>pnp: 00:01: ioport range 0x800-0x805 could not be reserved
><6>pnp: 00:01: ioport range 0x808-0x80f could not be reserved
><6>pnp: 00:02: ioport range 0x806-0x807 has been reserved
><6>pnp: 00:02: ioport range 0x810-0x85f could not be reserved
><6>pnp: 00:02: ioport range 0x860-0x87f has been reserved
><6>pnp: 00:02: ioport range 0x880-0x8bf has been reserved
><6>pnp: 00:02: ioport range 0x8c0-0x8df has been reserved
><6>pnp: 00:02: ioport range 0x8e0-0x8ff has been reserved
><6>pnp: 00:03: ioport range 0xf000-0xf0fe has been reserved
><6>pnp: 00:03: ioport range 0xf100-0xf1fe has been reserved
><6>pnp: 00:03: ioport range 0xf200-0xf2fe has been reserved
><6>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
><6>pnp: 00:03: ioport range 0xf500-0xf5fe has been reserved
><6>pnp: 00:03: ioport range 0xf600-0xf6fe has been reserved
><6>pnp: 00:03: ioport range 0xf800-0xf8fe has been reserved
><6>pnp: 00:03: ioport range 0xf900-0xf9fe has been reserved
><6>pnp: 00:08: ioport range 0x900-0x91f has been reserved
><6>pnp: 00:08: ioport range 0x3f0-0x3f1 has been reserved
><6>pnp: 00:0e: ioport range 0xbf40-0xbf5f has been reserved
><6>pnp: 00:0e: ioport range 0xbf20-0xbf3f has been reserved
><6>pnp: 00:10: ioport range 0x378-0x37f has been reserved
><6>pnp: 00:10: ioport range 0x778-0x77b has been reserved
><6>pnp: 00:11: ioport range 0x7b0-0x7bb has been reserved
><6>pnp: 00:11: ioport range 0x7c0-0x7df has been reserved
><6>pnp: 00:11: ioport range 0xbb0-0xbbb has been reserved
><6>pnp: 00:11: ioport range 0xbc0-0xbdf has been reserved
><6>pnp: 00:11: ioport range 0xfb0-0xfbb has been reserved
><6>pnp: 00:11: ioport range 0xfc0-0xfdf has been reserved
><6>pnp: 00:11: ioport range 0x13b0-0x13bb has been reserved
><6>pnp: 00:11: ioport range 0x13c0-0x13df has been reserved
><4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
><4>PCI: Bus 3, cardbus bridge: 0000:02:01.0
><4>  IO window: 0000e000-0000e0ff
><4>  IO window: 0000e400-0000e4ff
><4>  PREFETCH window: 40000000-41ffffff
><4>  MEM window: f6000000-f7ffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: e000-ffff
><6>  MEM window: f6000000-fdffffff
><6>  PREFETCH window: 40000000-42ffffff
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><4>PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
><4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
><4>PCI: setting IRQ 11 as level-triggered
><6>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
><6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
><5>apm: overridden by ACPI.
><6>audit: initializing netlink socket (disabled)
><5>audit(1133113735.196:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>vesafb: framebuffer at 0xe0000000, mapped to 0xf0880000, using 832k, total 832k
><6>vesafb: mode is 1024x768x8, linelength=1024, pages=0
><6>vesafb: protected mode interface info at 00ff:44f0
><6>vesafb: scrolling: redraw
><6>vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
><4>vesafb: Mode is VGA compatible
><4>Console: switching to colour frame buffer device 128x48
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12
><6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
><6>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
><4>PCI: setting IRQ 5 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
><6>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>loop: loaded (max 8 devices)
><6>mice: PS/2 mouse device common for all mice
><6>input: isa0061/input0//class/input as input0
><6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 3.39
><6>NET: Registered protocol family 2
><6>input: AT Translated Set 2 keyboard//class/input as input1
><4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP established hash table entries: 131072 (order: 7, 524288 bytes)
><4>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><6>Testing NMI watchdog ... CPU#0: NMI appears to be stuck!
><4>Using IPI Shortcut mode
><4>ACPI wakeup devices: 
><4> LID PBTN PCI0 UAR1 USB0 USB1 USB2 MODM PCIE MPCI 
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>Freeing unused kernel memory: 204k freed
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>ICH3M: IDE controller at PCI slot 0000:00:1f.1
><4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
><6>ICH3M: chipset revision 2
><6>ICH3M: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
><6>    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
><7>Probing IDE interface ide0...
><4>hda: FUJITSU MHT2040AT, ATA DISK drive
><6>Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b46b1, caps: 0x804793/0x0
><6>serio: Synaptics pass-through port at isa0060/serio1/input0
><6>input: SynPS/2 Synaptics TouchPad//class/input as input2
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><6>hda: max request size: 128KiB
><6>hda: Host Protected Area detected.
><4>	current capacity is 70673394 sectors (36184 MB)
><4>	native  capacity is 78140160 sectors (40007 MB)
><6>hda: Host Protected Area disabled.
><6>hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
><6>hda: cache flushes supported
><6> hda: hda1 hda2 hda3 hda4
><7>Probing IDE interface ide1...
><4>Attempting manual resume
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on hda1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>md: Autodetecting RAID arrays.
><6>md: autorun ...
><6>md: ... autorun DONE.
><6>Adding 250480k swap on /dev/hda2.  Priority:42 extents:1 across:250480k
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><3>hw_random: RNG not detected
><6>USB Universal Host Controller Interface driver v2.3
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
><7>PCI: Setting latency timer of device 0000:00:1f.5 to 64
><6>IBM TrackPoint firmware: 0x0b, buttons: 2/3
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>agpgart: Detected an Intel 830M Chipset.
><6>agpgart: Detected 892K stolen memory.
><6>agpgart: AGP aperture is 128M @ 0xe0000000
><6>input: TPPS/2 IBM TrackPoint//class/input as input3
><6>intel8x0_measure_ac97_clock: measured 55403 usecs
><6>intel8x0: clocking to 48000
><4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
><6>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
><4>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
><6>0000:02:00.0: 3Com PCI 3c905C Tornado at 0xec80. Vers LK1.1.19
><6>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
><6>Yenta: CardBus bridge found at 0000:02:01.0 [1028:00c8]
><6>Yenta: Using CSCINT to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:02:01.0, mfunc 0x012c1222, devctl 0x64
><6>Yenta: ISA IRQ mask 0x0498, PCI irq 11
><6>Socket status: 30000006
><6>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
><6>cs: IO port probe 0xe000-0xffff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfdffffff
><6>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x42ffffff
><6>cs: IO port probe 0x3e0-0x4ff: clean.
><6>cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x280-0x287 0x370-0x37f
><6>cs: IO port probe 0xc00-0xcff: clean.
><6>cs: IO port probe 0x820-0x8ff: clean.
><6>cs: IO port probe 0xa00-0xaff: clean.
><5>ReiserFS: hda3: found reiserfs format "3.6" with standard journal
><5>ReiserFS: hda3: using ordered data mode
><5>ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: hda3: checking transaction log (hda3)
><5>ReiserFS: hda3: Using r5 hash to sort names
><5>ReiserFS: hda4: found reiserfs format "3.6" with standard journal
><5>ReiserFS: hda4: using ordered data mode
><5>ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: hda4: checking transaction log (hda4)
><5>ReiserFS: hda4: Using r5 hash to sort names
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Nov 27 18:48:59 2005
>
>Configuring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
>Configured serial ports
>doneMounting shared memory FS on /dev/shmdone
>Starting udevd <notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/bin vga=0x305 DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/udevd ]
>udevd-event[1445]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1447]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1449]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1451]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1453]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1455]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1457]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1459]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1461]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>done
>Activating swap-devices in /etc/fstab...
>udevd-event[1599]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1601]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1603]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1605]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1607]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1609]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1611]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1613]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1697]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1699]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1701]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1703]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>doneudevd-event[1746]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1748]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1750]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1758]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1760]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1762]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1764]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1852]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1862]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1863]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1864]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1865]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1872]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1882]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1888]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1894]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1900]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1908]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1919]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1920]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1927]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1937]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1943]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1955]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1959]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1977]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1981]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1991]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1996]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2015]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2018]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2032]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2037]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2002]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2044]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2053]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2054]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2055]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2057]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2084]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2086]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2088]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2090]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2092]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1866]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[1957]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2107]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2114]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2119]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2121]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2123]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2125]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2127]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2129]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2131]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2133]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2135]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2137]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2139]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2079]: run_program: '/lib/udev/create_floppy_devices' abnormal exit
>
>udevd-event[2170]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2143]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2141]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2152]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2154]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2150]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2167]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2117]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2145]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2172]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2178]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2191]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2199]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2201]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2204]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2148]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2220]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2236]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2245]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2249]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2251]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2252]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2253]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2254]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2262]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2263]: run_program: exec of program '/usr/sbin/alsactl' failed
>
>udevd-event[2264]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2281]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2290]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2292]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2294]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2300]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2314]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2316]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2319]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2322]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>udevd-event[2325]: run_program: exec of program '/usr/sbin/hal.hotplug' failed
>
>Checking file systems...
>fsck 1.38 (30-Jun-2005)
>Reiserfs super block in block 16 on 0x303 of format 3.6 with standard journal
>Blocks (total/free): 1342896/372584 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/hda3' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>Reiserfs super block in block 16 on 0x304 of format 3.6 with standard journal
>Blocks (total/free): 7751520/4750916 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/hda4' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>doneSetting up kernel module dependencies (if required)done
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>initramdevs on /dev type tmpfs (rw)
>tmpfs on /dev/shm type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/hda3 on /usr type reiserfs (rw)
>/usr/opt on /opt type none (rw,bind)
>/dev/hda4 on /home type reiserfs (rw,acl)
>/home/ftp on /srv/ftp type none (rw,bind)
>doneLoading required kernel modules
>doneSetting up the CMOS clockdone
>udevd-event[2448]: run_program: '/lib/udev/create_floppy_devices' abnormal exit
>
>Retry device configurationdone
>done
><notice>killproc: kill(1391,29)
>Creating /var/log/boot.msg
>doneSetting up hostname 'gab'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>done
>done
>Activating crypto devices using /etc/cryptotab ... 
>doneRestore device permissionsdone
>Activating remaining swap-devices in /etc/fstab...
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>System Boot Control: The system has been set up
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1391,3)
>
>INIT: Entering runlevel: 5
>
>
><notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon
>Boot logging started on /dev/tty1(/dev/console) at Sun Nov 27 18:49:26 2005
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
> --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
><notice>checkproc: /sbin/udevd 1440
>udevd already runningdone
>Starting D-BUS daemondone
><notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd -a /var/lib/named/dev/log -a /var/lib/ntp/dev/log -a /var/lib/stunnel/dev/log ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/syslogd ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 7 -2 -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>Setting up network interfaces:
>Initializing random number generatordone
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Starting resource managerdone
>    lo        
>    lo        IP address: 127.0.0.1/8   
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
>Starting nfsboot (sm-notify) done
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Starting SSH daemondone
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>Starting CRON daemondone
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting Name Service Cache Daemondone
><notice>startproc: execve (/usr/sbin/ddtcd) [ /usr/sbin/ddtcd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/ddtcd ]
>Starting DDT client daemondone
><notice>startproc: execve (/usr/sbin/acpid) [ /usr/sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/acpid ]
>acpid: loading ACPI modules ( ac battery button fan processor thermal ) done
>Starting acpid done
><notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>Starting HAL daemondone
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
>Starting powersaved  (accessing ACPI events over acpid) done
>Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x305 RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ XCURSOR_THEME=blueprint-cursor-theme no_proxy=localhost WINDOWMANAGER=/usr/X11R6/bin/kde LC_CTYPE=de_DE.UTF-8 SPLASH=no ROOTFS_BLKDEV=/dev/hda1 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>done
><notice>checkproc: /opt/kde3/bin/kdm 4258
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: splash
><notice>killproc: kill(3680,3)

Actions: View

Attachments on bug 135615: 58791