Attachment 59008 Details for Bug 135708

config file generated with fglrxconfig

xorg.conf.hold (text/plain), 19.04 KB, created by Bart Whiteley on 2005-11-29 16:30:27 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bart Whiteley

Created: 2005-11-29 16:30:27 UTC

Size: 19.04 KB

patch

obsolete

># File: xorg.conf
># File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.
>
># Note by ATI: the below copyright notice is there for servicing possibly
># pending third party rights on the file format and the instance of this file.
>#
># Copyright (c) 1999 by The XFree86 Project, Inc.
>#
># Permission is hereby granted, free of charge, to any person obtaining a
># copy of this software and associated documentation files (the "Software"),
># to deal in the Software without restriction, including without limitation
># the rights to use, copy, modify, merge, publish, distribute, sublicense,
># and/or sell copies of the Software, and to permit persons to whom the
># Software is furnished to do so, subject to the following conditions:
># 
># The above copyright notice and this permission notice shall be included in
># all copies or substantial portions of the Software.
># 
># THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
># IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
># FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
># THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
># WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
># OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
># SOFTWARE.
># 
># Except as contained in this notice, the name of the XFree86 Project shall
># not be used in advertising or otherwise to promote the sale, use or other
># dealings in this Software without prior written authorization from the
># XFree86 Project.
>#
>
># **********************************************************************
># Refer to the XF86Config(4/5) man page for details about the format of 
># this file.
># **********************************************************************
>
># **********************************************************************
># DRI Section
># **********************************************************************
>Section "dri"
># Access to OpenGL ICD is allowed for all users:
>    Mode 0666
># Access to OpenGL ICD is restricted to a specific user group:
>#    Group 100    # users
>#    Mode 0660
>EndSection
>
># **********************************************************************
># Module section -- this  section  is used to specify
># which dynamically loadable modules to load.
># **********************************************************************
>#
>Section "Module"
>
># This loads the DBE extension module.
>
>    Load        "dbe"  	# Double buffer extension
>
># This loads the miscellaneous extensions module, and disables
># initialisation of the XFree86-DGA extension within that module.
>    SubSection  "extmod"
>      Option    "omit xfree86-dga"   # don't initialise the DGA extension
>    EndSubSection
>
># This loads the Type1 and FreeType font modules
>    Load        "type1"
>    Load        "freetype"
>
># This loads the GLX module
>    Load        "glx"   # libglx.a
>    Load        "dri"   # libdri.a
>
>EndSection
>
># **********************************************************************
># Files section.  This allows default font and rgb paths to be set
># **********************************************************************
>
>Section "Files"
>
># The location of the RGB database.  Note, this is the name of the
># file minus the extension (like ".txt" or ".db").  There is normally
># no need to change the default.
>
>    RgbPath	"/usr/X11R6/lib/X11/rgb"
>
># Multiple FontPath entries are allowed (which are concatenated together),
># as well as specifying multiple comma-separated entries in one FontPath
># command (or a combination of both methods)
># 
># If you don't have a floating point coprocessor and emacs, Mosaic or other
># programs take long to start up, try moving the Type1 and Speedo directory
># to the end of this list (or comment them out).
># 
>
>    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
>    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
>    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
>#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
>    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
>#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
>    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
>#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
>
># The module search path.  The default path is shown here.
>
>#    ModulePath "/usr/X11R6/lib/modules"
>
>EndSection
>
># **********************************************************************
># Server flags section.
># **********************************************************************
>
>Section "ServerFlags"
>
># Uncomment this to cause a core dump at the spot where a signal is 
># received.  This may leave the console in an unusable state, but may
># provide a better stack trace in the core dump to aid in debugging
>
>#    Option "NoTrapSignals"
>
># Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
># This allows clients to receive this key event.
>
>#    Option "DontZap"
>
># Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
># sequences.  This allows clients to receive these key events.
>
>#    Option "Dont Zoom"
>
># Uncomment this to disable tuning with the xvidtune client. With
># it the client can still run and fetch card and monitor attributes,
># but it will not be allowed to change them. If it tries it will
># receive a protocol error.
>
>#    Option "DisableVidModeExtension"
>
># Uncomment this to enable the use of a non-local xvidtune client. 
>
>#    Option "AllowNonLocalXvidtune"
>
># Uncomment this to disable dynamically modifying the input device
># (mouse and keyboard) settings. 
>
>#    Option "DisableModInDev"
>
># Uncomment this to enable the use of a non-local client to
># change the keyboard or mouse settings (currently only xset).
>
>#    Option "AllowNonLocalModInDev"
>
>EndSection
>
># **********************************************************************
># Input devices
># **********************************************************************
>
># **********************************************************************
># Core keyboard's InputDevice section
># **********************************************************************
>
>Section "InputDevice"
>
>    Identifier	"Keyboard1"
>    Driver	"kbd"
># For most OSs the protocol can be omitted (it defaults to "Standard").
># When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
># uncomment the following line.
>
>#    Option "Protocol"   "Xqueue"
>
>    Option "AutoRepeat" "500 30"
>
># Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
>#    Option "Xleds"      "1 2 3"
>
>#    Option "LeftAlt"    "Meta"
>#    Option "RightAlt"   "ModeShift"
>
># To customise the XKB settings to suit your keyboard, modify the
># lines below (which are the defaults).  For example, for a non-U.S.
># keyboard, you will probably want to use:
>#    Option "XkbModel"   "pc102"
># If you have a US Microsoft Natural keyboard, you can use:
>#    Option "XkbModel"   "microsoft"
>#
># Then to change the language, change the Layout setting.
># For example, a german layout can be obtained with:
>#    Option "XkbLayout"  "de"
># or:
>#    Option "XkbLayout"  "de"
>#    Option "XkbVariant" "nodeadkeys"
>#
># If you'd like to switch the positions of your capslock and
># control keys, use:
>#    Option "XkbOptions" "ctrl:swapcaps"
>
># These are the default XKB settings for XFree86
>#    Option "XkbRules"   "xfree86"
>#    Option "XkbModel"   "pc101"
>#    Option "XkbLayout"  "us"
>#    Option "XkbVariant" ""
>#    Option "XkbOptions" ""
>
>#    Option "XkbDisable"
>
>    Option "XkbRules"	"xfree86"
>    Option "XkbModel"	"pc104"
>    Option "XkbLayout"	"us"
>
>EndSection
>
>
># **********************************************************************
># Core Pointer's InputDevice section
># **********************************************************************
>
>Section "InputDevice"
>
># Identifier and driver
>
>    Identifier	"Mouse1"
>    Driver "mouse"
>    Option "Protocol"   "ImPS/2"
>    Option "ZAxisMapping"   "4 5"
>    Option "Device"     "/dev/input/mice"
>
># When using XQUEUE, comment out the above two lines, and uncomment
># the following line.
>
>#    Option "Protocol"   "Xqueue"
>
># Baudrate and SampleRate are only for some Logitech mice. In
># almost every case these lines should be omitted.
>
>#    Option "BaudRate"   "9600"
>#    Option "SampleRate" "150"
>
># Emulate3Buttons is an option for 2-button Microsoft mice
># Emulate3Timeout is the timeout in milliseconds (default is 50ms)
>
>#    Option "Emulate3Buttons"
>#    Option "Emulate3Timeout"    "50"
>
># ChordMiddle is an option for some 3-button Logitech mice
>
>#    Option "ChordMiddle"
>
>EndSection
>
>
># **********************************************************************
># Other input device sections 
># this is optional and is required only if you
># are using extended input devices.  This is for example only.  Refer
># to the XF86Config man page for a description of the options.
># **********************************************************************
>#
># Section "InputDevice" 
>#    Identifier  "Mouse2"
>#    Driver      "mouse"
>#    Option      "Protocol"      "MouseMan"
>#    Option      "Device"        "/dev/mouse2"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "spaceball"
>#    Driver     "magellan"
>#    Option     "Device"         "/dev/cua0"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "spaceball2"
>#    Driver     "spaceorb"
>#    Option     "Device"         "/dev/cua0"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "touchscreen0"
>#    Driver     "microtouch"
>#    Option     "Device"         "/dev/ttyS0"
>#    Option     "MinX"           "1412"
>#    Option     "MaxX"           "15184"
>#    Option     "MinY"           "15372"
>#    Option     "MaxY"           "1230"
>#    Option     "ScreenNumber"   "0"
>#    Option     "ReportingMode"  "Scaled"
>#    Option     "ButtonNumber"   "1"
>#    Option     "SendCoreEvents"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "touchscreen1"
>#    Driver     "elo2300"
>#    Option     "Device"         "/dev/ttyS0"
>#    Option     "MinX"           "231"
>#    Option     "MaxX"           "3868"
>#    Option     "MinY"           "3858"
>#    Option     "MaxY"           "272"
>#    Option     "ScreenNumber"   "0"
>#    Option     "ReportingMode"  "Scaled"
>#    Option     "ButtonThreshold"    "17"
>#    Option     "ButtonNumber"   "1"
>#    Option     "SendCoreEvents"
># EndSection
>
># **********************************************************************
># Monitor section
># **********************************************************************
>
># Any number of monitor sections may be present
>
>Section "Monitor"
>    Identifier  "Monitor0"
># === mode lines based on GTF ===
># VGA @ 100Hz
># Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
># SVGA @ 100Hz
># Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
># XVGA @ 100Hz
># Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
># 1152x864 @ 60Hz
># Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
># 1152x864 @ 85Hz
># Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
># 1152x864 @ 100Hz
># Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
># 1280x960 @ 75Hz
># Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
># 1280x960 @ 100Hz
># Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
># SXGA @ 100Hz
># Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
># SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
># Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
># 1600x1000 @ 60Hz
># Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
># 1600x1000 @ 75Hz
># Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
># 1600x1000 @ 85Hz
># Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
># 1600x1000 @ 100Hz
># Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
># 1600x1024 @ 60Hz
># Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
># 1600x1024 @ 75Hz
># Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
># 1600x1024 @ 76Hz
># Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
># 1600x1024 @ 85Hz
># Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
># 1920x1080 @ 60Hz
># Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
># 1920x1080 @ 75Hz
># Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
># 1920x1200 @ 60Hz
># Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
># 1920x1200 @ 75Hz
># Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
># 2048x1536 @ 60
># Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
># 2048x1536 @ 60
># Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
># 1400x1050 @ 60Hz M9 Laptop mode 
># ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
># 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
># Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
># 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
># Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
>
>EndSection
>
>
># **********************************************************************
># Graphics device section
># **********************************************************************
>
># Any number of graphics device sections may be present
>
># Standard VGA Device:
>
>Section "Device"
>    Identifier  "Standard VGA"
>    VendorName  "Unknown"
>    BoardName   "Unknown"
>
># The chipset line is optional in most cases.  It can be used to override
># the driver's chipset detection, and should not normally be specified.
>
>#    Chipset     "generic"
>
># The Driver line must be present.  When using run-time loadable driver
># modules, this line instructs the server to load the specified driver
># module.  Even when not using loadable driver modules, this line
># indicates which driver should interpret the information in this section.
>
>    Driver      "vga"
># The BusID line is used to specify which of possibly multiple devices
># this section is intended for.  When this line isn't present, a device
># section can only match up with the primary video device.  For PCI
># devices a line like the following could be used.  This line should not
># normally be included unless there is more than one video device
># installed.
>
>#    BusID       "PCI:0:10:0"
>
>#    VideoRam    256
>
>#    Clocks      25.2 28.3
>
>EndSection
>
># === ATI device section ===
>
>Section "Device"
>    Identifier                          "ATI Graphics Adapter"
>    Driver                              "fglrx"
># ### generic DRI settings ###
># === disable PnP Monitor  ===
>    #Option                              "NoDDC"
># === disable/enable XAA/DRI ===
>    Option "no_accel"                   "no"
>    Option "no_dri"                     "no"
># === misc DRI settings ===
>    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
># ### FireGL DDX driver module specific settings ###
># === Screen Management ===
>    Option "DesktopSetup"               "horizontal" 
>    Option "ScreenOverlap"              "0" 
>    Option "GammaCorrectionI"           "0x00000000"
>    Option "GammaCorrectionII"          "0x00000000"
># === OpenGL specific profiles/settings ===
>    Option "Capabilities"               "0x00000000"
>    Option "CapabilitiesEx"             "0x00000000"
># === Video Overlay for the Xv extension ===
>    Option "VideoOverlay"               "on"
># === OpenGL Overlay ===
># Note: When OpenGL Overlay is enabled, Video Overlay
>#       will be disabled automatically
>    Option "OpenGLOverlay"              "off"
># === Center Mode (Laptops only) ===
>    Option "CenterMode"                 "off"
># === Pseudo Color Visuals (8-bit visuals) ===
>    Option "PseudoColorVisuals"         "off"
># === QBS Management ===
>    Option "Stereo"                     "off"
>    Option "StereoSyncEnable"           "1"
># === FSAA Management ===
>    Option "FSAAEnable"                 "no"
>    Option "FSAAScale"                  "1"
>    Option "FSAADisableGamma"           "no"
>    Option "FSAACustomizeMSPos"         "no"
>    Option "FSAAMSPosX0"                "0.000000"
>    Option "FSAAMSPosY0"                "0.000000"
>    Option "FSAAMSPosX1"                "0.000000"
>    Option "FSAAMSPosY1"                "0.000000"
>    Option "FSAAMSPosX2"                "0.000000"
>    Option "FSAAMSPosY2"                "0.000000"
>    Option "FSAAMSPosX3"                "0.000000"
>    Option "FSAAMSPosY3"                "0.000000"
>    Option "FSAAMSPosX4"                "0.000000"
>    Option "FSAAMSPosY4"                "0.000000"
>    Option "FSAAMSPosX5"                "0.000000"
>    Option "FSAAMSPosY5"                "0.000000"
># === Misc Options ===
>    Option "UseFastTLS"                 "0"
>    Option "BlockSignalsOnLock"         "on"
>    Option "UseInternalAGPGART"         "yes"
>    Option "ForceGenericCPU"            "no"
>    BusID "PCI:1:0:0"    # vendor=1002, device=4e47
>    Screen 0
>EndSection
>
># **********************************************************************
># Screen sections
># **********************************************************************
>
># Any number of screen sections may be present.  Each describes
># the configuration of a single screen.  A single specific screen section
># may be specified from the X server command line with the "-screen"
># option.
>Section "Screen"
>    Identifier  "Screen0"
>    Device      "ATI Graphics Adapter"
>    Monitor     "Monitor0"
>    DefaultDepth 24
>    #Option "backingstore"
>
>    Subsection "Display"
>        Depth       24
>        Modes       "1600x1200"
>        ViewPort    0 0  # initial origin if mode is smaller than desktop
>#        Virtual     1280 1024
>    EndSubsection
>EndSection
>
># **********************************************************************
># ServerLayout sections.
># **********************************************************************
>
># Any number of ServerLayout sections may be present.  Each describes
># the way multiple screens are organised.  A specific ServerLayout
># section may be specified from the X server command line with the
># "-layout" option.  In the absence of this, the first section is used.
># When now ServerLayout section is present, the first Screen section
># is used alone.
>
>Section "ServerLayout"
>
># The Identifier line must be present
>    Identifier  "Server Layout"
>
># Each Screen line specifies a Screen section name, and optionally
># the relative position of other screens.  The four names after
># primary screen name are the screens to the top, bottom, left and right
># of the primary screen.
>
>    Screen "Screen0"
>
># Each InputDevice line specifies an InputDevice section name and
># optionally some options to specify the way the device is to be
># used.  Those options include "CorePointer", "CoreKeyboard" and
># "SendCoreEvents".
>
>    InputDevice "Mouse1" "CorePointer"
>    InputDevice "Keyboard1" "CoreKeyboard"
>
>EndSection
>
>### EOF ###

Actions: View

Attachments on bug 135708: 58880 | 59007 | 59008 | 59019 | 59020 | 59021 | 59022