Attachment 59041 Details for Bug 133016

dmesg output

dmesg.txt (text/plain), 16.42 KB, created by Benj FitzPatrick on 2005-11-29 21:57:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Benj FitzPatrick

Created: 2005-11-29 21:57:43 UTC

Size: 16.42 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/hda5 vga=0x317 selinux=0    resume=/dev/hda2  splash=silent)
>Linux version 2.6.13-15-smp (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 SMP Tue Sep 13 14:56:15 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000fbff0000 (usable)
> BIOS-e820: 00000000fbff0000 - 00000000fbfff000 (ACPI data)
> BIOS-e820: 00000000fbfff000 - 00000000fc000000 (ACPI NVS)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000f6d70
>ACPI: RSDT (v001 A M I  OEMRSDT  0x10000611 MSFT 0x00000097) @ 0x00000000fbff0000
>ACPI: FADT (v001 A M I  OEMFACP  0x10000611 MSFT 0x00000097) @ 0x00000000fbff0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x10000611 MSFT 0x00000097) @ 0x00000000fbff0380
>ACPI: OEMB (v001 A M I  OEMBIOS  0x10000611 MSFT 0x00000097) @ 0x00000000fbfff040
>ACPI: SRAT (v001 A M I  OEMSRAT  0x10000611 MSFT 0x00000097) @ 0x00000000fbff3b10
>ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x00000000fbff3c20
>ACPI: DSDT (v001  0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x0000000000000000
>SRAT: PXM 0 -> APIC 0 -> CPU 0 -> Node 0
>SRAT: PXM 1 -> APIC 1 -> CPU 1 -> Node 1
>SRAT: Node 0 PXM 0 100000-7fffffff
>SRAT: Node 1 PXM 1 80000000-fbffffff
>SRAT: Node 1 PXM 1 80000000-ffffffff
>SRAT: Node 0 PXM 0 0-7fffffff
>Using 24 for the hash shift. Max adder is fbfeffff 
>Bootmem setup node 0 0000000000000000-000000007fffffff
>Bootmem setup node 1 0000000080000000-00000000fbfeffff
>On node 0 totalpages: 524190
>  DMA zone: 3999 pages, LIFO batch:1
>  Normal zone: 520191 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>On node 1 totalpages: 507887
>  DMA zone: 0 pages, LIFO batch:1
>  Normal zone: 507887 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:5 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:5 APIC version 16
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27
>ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28])
>IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at fc000000 (gap: fc000000:3780000)
>Checking aperture...
>CPU 0: aperture @ 3002000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>Built 2 zonelists
>Kernel command line: root=/dev/hda5 vga=0x317 selinux=0    resume=/dev/hda2  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 1992.321 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Memory: 4053452k/4128704k available (2432k kernel code, 0k reserved, 942k data, 212k init)
>Calibrating delay using timer specific routine.. 3992.89 BogoMIPS (lpj=7985786)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(1) -> Node 0 -> Core 0
>mtrr: v2.0 (20020519)
>checking if image is initramfs... it is
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>Using local APIC timer interrupts.
>Detected 12.452 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3985.02 BogoMIPS (lpj=7970057)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(1) -> Node 1 -> Core 0
>AMD Opteron(tm) Processor 246 stepping 08
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff -5 cycles, maxerr 1067 cycles)
>Brought up 2 CPUs
>Disabling vsyscall due to use of PM timer
>time.c: Using PM based timekeeping.
>testing NMI watchdog ... OK.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>request_module: runaway loop modprobe char-major-1-11
>request_module: runaway loop modprobe char-major-1-11
>request_module: runaway loop modprobe char-major-1-11
>request_module: runaway loop modprobe char-major-1-11
>request_module: runaway loop modprobe char-major-1-11
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>Boot video device is 0000:03:06.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>PCI: Bridge: 0000:00:06.0
>  IO window: 9000-bfff
>  MEM window: fc900000-feafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: fc800000-fc8fffff
>  PREFETCH window: ff500000-ff5fffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1133277792.224:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>PCI: MSI quirk detected. pci_msi_quirk set.
>PCI: MSI quirk detected. pci_msi_quirk set.
>vesafb: framebuffer at 0xfd000000, mapped to 0xffffc20000080000, using 6144k, total 8128k
>vesafb: mode is 1024x768x16, linelength=2048, pages=4
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12
>hpet_acpi_add: no address or irqs in _CRS
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>PCI1 USB0 USB1 UAR1 UAR2 GOLA GLAN GOLB SMBC AC97 MODM PWRB 
>ACPI: (supports S0 S1 S5)
>Freeing unused kernel memory: 212k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>AMD8111: IDE controller at PCI slot 0000:00:07.1
>AMD8111: chipset revision 3
>AMD8111: not 100% native mode: will probe irqs later
>AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: Maxtor 7Y250P0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 1024KiB
>hda: 490234752 sectors (251000 MB) w/7936KiB Cache, CHS=30515/255/63, UDMA(133)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
>Probing IDE interface ide1...
>hdc: _NEC DVD_RW ND-3520AW, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>libata version 1.12 loaded.
>sata_sil version 0.9
>ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 19 (level, low) -> IRQ 169
>ata1: SATA max UDMA/100 cmd 0xFFFFC20000006C80 ctl 0xFFFFC20000006C8A bmdma 0xFFFFC20000006C00 irq 169
>ata2: SATA max UDMA/100 cmd 0xFFFFC20000006CC0 ctl 0xFFFFC20000006CCA bmdma 0xFFFFC20000006C08 irq 169
>ata3: SATA max UDMA/100 cmd 0xFFFFC20000006E80 ctl 0xFFFFC20000006E8A bmdma 0xFFFFC20000006E00 irq 169
>ata4: SATA max UDMA/100 cmd 0xFFFFC20000006EC0 ctl 0xFFFFC20000006ECA bmdma 0xFFFFC20000006E08 irq 169
>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ata1: dev 0 cfg 49:2f00 82:74eb 83:7f63 84:4003 85:74e9 86:3c43 87:4003 88:207f
>ata1: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
>ata1: dev 0 configured for UDMA/100
>scsi0 : sata_sil
>ata2: dev 0 cfg 49:2f00 82:74eb 83:7f63 84:4003 85:74e9 86:3c43 87:4003 88:207f
>ata2: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
>ata2: dev 0 configured for UDMA/100
>scsi1 : sata_sil
>ata3: no device found (phy stat 00000000)
>scsi2 : sata_sil
>ata4: no device found (phy stat 00000000)
>scsi3 : sata_sil
>  Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>Losing some ticks... checking if CPU frequency changed.
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sdb: drive cache: write back
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2
>Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
>Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 0
>ACPI: CPU0 (power states: C1[C1])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: CPU1 (power states: C1[C1])
>    ACPI-0733: *** Warning: Processor Device is not present
>    ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x3
>    ACPI-0733: *** Warning: Processor Device is not present
>    ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x4
>ReiserFS: hda5: found reiserfs format "3.6" with standard journal
>ReiserFS: hda5: using ordered data mode
>ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda5: checking transaction log (hda5)
>ReiserFS: hda5: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>bootsplash: status on console 0 changed to on
>Adding 1052248k swap on /dev/hda2.  Priority:-1 extents:1
>Adding 1052216k swap on /dev/sda1.  Priority:-2 extents:1
>Adding 1052216k swap on /dev/sdb1.  Priority:-3 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>ReiserFS: sda2: using ordered data mode
>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda2: checking transaction log (sda2)
>ReiserFS: sda2: Using r5 hash to sort names
>ReiserFS: hda6: found reiserfs format "3.6" with standard journal
>ReiserFS: hda6: using ordered data mode
>ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda6: checking transaction log (hda6)
>ReiserFS: hda6: Using r5 hash to sort names
>ReiserFS: sdb2: found reiserfs format "3.6" with standard journal
>ReiserFS: sdb2: using ordered data mode
>ReiserFS: sdb2: journal params: device sdb2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sdb2: checking transaction log (sdb2)
>ReiserFS: sdb2: Using r5 hash to sort names
>lp: driver loaded but no devices found
>bootsplash: status on console 0 changed to on
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hw_random: AMD768 system management I/O registers at 0x1000.
>hw_random hardware driver 1.0.0 loaded
>tg3.c:v3.37 (August 25, 2005)
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 24 (level, low) -> IRQ 177
>eth0: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2f:e8:b8
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[769f4000]
>ACPI: PCI Interrupt 0000:02:09.1[B] -> GSI 25 (level, low) -> IRQ 185
>eth1: Tigon3 [partno(BCM95704A7) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:2f:e8:b9
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth1: dma_rwctrl[769f4000]
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:03:00.0[D] -> GSI 19 (level, low) -> IRQ 169
>ohci_hcd 0000:03:00.0: OHCI Host Controller
>ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:03:00.0: irq 169, io mem 0xfeafc000
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:03:00.1[D] -> GSI 19 (level, low) -> IRQ 169
>ohci_hcd 0000:03:00.1: OHCI Host Controller
>ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:03:00.1: irq 169, io mem 0xfeafd000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>usbcore: registered new driver hiddev
>input: USB HID v1.10 Keyboard [ATEN ATEN  CS-1758/54] on usb-0000:03:00.1-1
>input: USB HID v1.10 Mouse [ATEN ATEN  CS-1758/54] on usb-0000:03:00.1-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>pcc_acpi: module not supported by Novell, setting U taint flag.
>subfs 0.9
>ISO 9660 Extensions: Microsoft Joliet Level 3
>bootsplash: status on console 0 changed to on
>ISO 9660 Extensions: RRIP_1991A
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff803f99e0(lo)
>IPv6 over IPv4 tunneling driver
>st: Version 20050501, fixed bufsize 32768, s/g segs 256
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>eth0: no IPv6 routers present
>lp: driver loaded but no devices found
>lp: driver loaded but no devices found
>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
>NET: Registered protocol family 17
>ip_tables: (C) 2000-2002 Netfilter core team

Actions: View

Attachments on bug 133016: 57392 | 59041 | 59042 | 59043 | 59044 | 59045