Attachment 59784 Details for Bug 136866

hotswap.oops

hotswap.oops (text/plain), 21.92 KB, created by Hannes Reinecke on 2005-12-05 08:55:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Hannes Reinecke

Created: 2005-12-05 08:55:55 UTC

Size: 21.92 KB

patch

obsolete

>Linux version 2.6.14.3-20051130025517-smp (geeko@buildhost) (gcc version 4.1.0 20051123 (prerelease) (SUSE Linux)) #1 SMP Wed Nov 30 02:55:17 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)
> BIOS-e820: 000000001fee0000 - 000000001fef4000 (ACPI data)
> BIOS-e820: 000000001fef4000 - 000000001ff00000 (ACPI NVS)
> BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>510MB LOWMEM available.
>found SMP MP-table at 000f6940
>On node 0 totalpages: 130784
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126688 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>Using APIC driver default
>ACPI: RSDP (v002 LENOVO                                ) @ 0x000f6900
>ACPI: XSDT (v001 LENOVO TP-79    0x00000420  LTP 0x00000000) @ 0x1fee7429
>ACPI: FADT (v003 LENOVO TP-79    0x00000420 LNVO 0x00000001) @ 0x1fee7500
>ACPI: SSDT (v001 LENOVO TP-79    0x00000420 MSFT 0x0100000e) @ 0x1fee76b4
>ACPI: ECDT (v001 LENOVO TP-79    0x00000420 LNVO 0x00000001) @ 0x1fef3d42
>ACPI: TCPA (v002 LENOVO TP-79    0x00000420 LNVO 0x00000001) @ 0x1fef3d94
>ACPI: MADT (v001 LENOVO TP-79    0x00000420 LNVO 0x00000001) @ 0x1fef3dc6
>ACPI: MCFG (v001 LENOVO TP-79    0x00000420 LNVO 0x00000001) @ 0x1fef3e2e
>ACPI: HPET (v001 LENOVO TP-79    0x00000420 LNVO 0x00000001) @ 0x1fef3e6c
>ACPI: BOOT (v001 LENOVO TP-79    0x00000420  LTP 0x00000001) @ 0x1fef3fd8
>ACPI: SSDT (v001 LENOVO TP-79    0x00000420 INTL 0x20050513) @ 0x1fee6a44
>ACPI: SSDT (v001 LENOVO TP-79    0x00000420 INTL 0x20050513) @ 0x1fee686c
>ACPI: DSDT (v001 LENOVO TP-79    0x00000420 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1 already used, trying 2
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda6 vga=0x345 selinux=0  splash=silent irqpoll   resume=/dev/sda1  splash=silent
>bootsplash: silent mode.
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511016k/523136k available (2013k kernel code, 11532k reserved, 680k data, 248k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 69ns tick, 3 64-bit timers
>Using HPET for base-timer
>Using HPET for gettimeofday
>Detected 1664.454 MHz processor.
>Using hpet for high-res timesource
>Calibrating delay using timer specific routine.. 3342.36 BogoMIPS (lpj=6684727)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2597k freed
> not found!
>CPU0: Intel Genuine Intel(R) CPU           T1300  @ 1.66GHz stepping 08
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3329.03 BogoMIPS (lpj=6658065)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T1300  @ 1.66GHz stepping 08
>Total of 2 processors activated (6671.39 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had 0 usecs TSC skew, fixed it up.
>CPU#1 had 0 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd84b, last bus=24
>PCI: Using MMCONFIG
>ACPI: Subsystem revision 20050902
>ACPI: Found ECDT
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>burst-mode-ec-10-Aug
>ACPI: Embedded Controller [EC] (gpe 28)
>ACPI: Power Resource [PUBS] (on)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: ee100000-ee1fffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 3000-3fff
>  MEM window: ee000000-ee0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: 4000-5fff
>  MEM window: ec000000-edffffff
>  PREFETCH window: e4000000-e40fffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 6000-7fff
>  MEM window: e8000000-e9ffffff
>  PREFETCH window: e4100000-e41fffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 8000-9fff
>  MEM window: ea000000-ebffffff
>  PREFETCH window: e4200000-e42fffff
>PCI: Bus 22, cardbus bridge: 0000:15:00.0
>  IO window: 0000a000-0000a0ff
>  IO window: 0000a400-0000a4ff
>  PREFETCH window: e0000000-e1ffffff
>  MEM window: e6000000-e7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-dfff
>  MEM window: e4300000-e7ffffff
>  PREFETCH window: e0000000-e3ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>Simple Boot Flag at 0x35 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1133772561.152:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>Allocate Port Service[pcie03]
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>Allocate Port Service[pcie03]
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>Allocate Port Service[pcie03]
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>Allocate Port Service[pcie03]
>vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 11550k, total 16384k
>vesafb: mode is 1400x1050x16, linelength=2816, pages=4
>vesafb: protected mode interface info at c000:ae54
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>vesafb: Mode is VGA compatible
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 128695 bytes,<6>...found (1400x1050, 21637 bytes, v3).
>Console: switching to colour frame buffer device 173x61
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>hpet_acpi_add: no address or irqs in _CRS
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: isa0061/input0//class/input as input0
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.39
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard//class/input as input1
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Starting balanced_irq
>Using IPI No-Shortcut mode
>ACPI wakeup devices: 
> LID SLPB EXP0 EXP1 EXP2 EXP3 PCI1 USB0 USB1 USB2 USB7 HDEF 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 248k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 169
>ICH7: chipset revision 2
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad//class/input as input2
>hda: HL-DT-STDVD-ROM GDR8085N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>libata version 1.12 loaded.
>ahci version 1.01
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci(0000:00:1f.2) AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci(0000:00:1f.2) flags: 64bit ncq pm led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xE082C500 ctl 0x0 bmdma 0x0 irq 66
>ata2: SATA max UDMA/133 cmd 0xE082C580 ctl 0x0 bmdma 0x0 irq 66
>ata3: SATA max UDMA/133 cmd 0xE082C600 ctl 0x0 bmdma 0x0 irq 66
>ata4: SATA max UDMA/133 cmd 0xE082C680 ctl 0x0 bmdma 0x0 irq 66
>input: TPPS/2 IBM TrackPoint//class/input as input3
>ata1: dev 0 cfg 49:0f00 82:746b 83:7f69 84:6063 85:f469 86:3c49 87:6063 88:043f
>ata1: dev 0 ATA, max UDMA/100, 195371568 sectors: lba48
>ata1: dev 0 configured for UDMA/100
>scsi0 : ahci
>ata2: no device found (phy stat 00000000)
>scsi1 : ahci
>ata3: no device found (phy stat 00000000)
>scsi2 : ahci
>ata4: no device found (phy stat 00000000)
>scsi3 : ahci
>  Vendor: ATA       Model: HTS541010G9SA00   Rev: MBZI
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (38 C)
>ACPI: Thermal Zone [THM1] (25 C)
>Attempting manual resume
>ReiserFS: sda6: found reiserfs format "3.6" with standard journal
>ReiserFS: sda6: using ordered data mode
>ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda6: checking transaction log (sda6)
>ReiserFS: sda6: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 1036152k swap on /dev/sda1.  Priority:-1 extents:1 across:1036152k
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>hda: ATAPI 24X DVD-ROM drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
>hw_random: RNG not detected
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: irq 74, io mem 0xee404000
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>shpchp: acpi_shpchprm:\_SB_.PCI0.PCI1 _HPP fail=0x5
>shpchp: acpi_pciehprm:\_SB_.PCI0.PCI1 OSHP fails=0x5
>shpchp: acpi_shpchprm:   Slot sun(1) at s:b:d:f=0x00:15:00:00
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001800
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 82
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 82
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 82, io base 0x00001820
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 90
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 90, io base 0x00001840
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 74, io base 0x00001860
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2012]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:15:00.0, mfunc 0x01d01002, devctl 0x64
>usb 5-2: new full speed USB device using uhci_hcd and address 2
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 169
>Socket status: 30000007
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xdfff
>cs: IO port probe 0xa000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
>pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: No new microcode data for CPU1
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
>ibm_acpi: http://ibm-acpi.sf.net/
>ibm_acpi: dock device not present
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c035db80(lo)
>IPv6 over IPv4 tunneling driver
>bootsplash: status on console 0 changed to on
>hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01)
>Unable to handle kernel NULL pointer dereference at virtual address 00000114
> printing eip:
>e18b1633
>*pde = 00000000
>Oops: 0000 [#1]
>SMP 
>Modules linked in: cpufreq_ondemand cpufreq_userspace cpufreq_powersave speedstep_centrino freq_table ipv6 ibm_acpi snd_pcm_oss button snd_mixer_oss battery snd_seq ac snd_seq_device edd pcmcia firmware_class snd_hda_intel snd_hda_codec snd_pcm snd_timer snd yenta_socket shpchp ehci_hcd uhci_hcd rsrc_nonstatic soundcore pcmcia_core sg usbcore snd_page_alloc pci_hotplug i2c_i801 generic i2c_core i8xx_tco joydev ide_cd cdrom dm_mod reiserfs fan thermal processor ata_piix ahci libata piix sd_mod scsi_mod ide_disk ide_core
>CPU:    0
>EIP:    0060:[<e18b1633>]    Not tainted VLI
>EFLAGS: 00010246   (2.6.14.3-20051130025517-smp) 
>EIP is at cdrom_lockdoor+0x33/0x120 [ide_cd]
>eax: e16bba90   ebx: dfb1291c   ecx: 00000000   edx: 00000000
>esi: dab61ef0   edi: e16bba90   ebp: 00000000   esp: dab61e48
>ds: 007b   es: 007b   ss: 0068
>Process hdparm (pid: 4092, threadinfo=dab60000 task=df66ba70)
>Stack: e16a01d9 000001f0 000001f1 000001f2 000001f3 000001f4 000001f5 000001f6 
>       000001f7 000003f6 00000000 00000000 dab61f0c 00000000 00000000 00000000 
>       0000000e dab61f14 de0ba59c c01e9077 00000000 0000000e 00000000 de0ba59c 
>Call Trace:
> [<e16a01d9>] init_hwif_default+0x29/0x130 [ide_core]
> [<c01e9077>] radix_tree_gang_lookup_tag+0x57/0x70
> [<c01e8ecf>] radix_tree_gang_lookup+0x4f/0x70
> [<c014eced>] find_get_pages+0x5d/0x70
> [<c0159872>] pagevec_lookup+0x22/0x30
> [<c0159db3>] invalidate_mapping_pages+0x43/0xe0
> [<c011768a>] smp_call_function+0xaa/0x110
> [<c01712c0>] invalidate_bh_lru+0x0/0x40
> [<e174a605>] cdrom_release+0x115/0x170 [cdrom]
> [<e18b3756>] idecd_release+0x26/0x40 [ide_cd]
> [<c017721b>] blkdev_put+0x13b/0x170
> [<c016f6dd>] __fput+0x9d/0x190
> [<c016dd77>] filp_close+0x47/0x80
> [<c010425b>] sysenter_past_esp+0x54/0x79
>Code: 89 b4 24 ec 00 00 00 89 ce 89 bc 24 f0 00 00 00 89 c7 89 ac 24 f4 00 00 00 89 d5 89 9c 24 e8 00 00 00 0f 84 a8 00 00 00 8b 4f 1c <f6> 81 14 01 00 00 02 74 44 31 db 0f b6 81 19 01 00 00 89 ea 80 
>

Actions: View

Attachments on bug 136866: 59784 | 59786