Attachment 59787 Details for Bug 136872

boot.msg

boot.msg (text/plain), 31.60 KB, created by Jan Blunck on 2005-12-05 09:41:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jan Blunck

Created: 2005-12-05 09:41:47 UTC

Size: 31.60 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.14.2-3-smp
>Loaded 23008 symbols from /boot/System.map-2.6.14.2-3-smp.
>Symbols match kernel version 2.6.14.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.14.2-3-smp (geeko@buildhost) (gcc version 4.1.0 20051123 (prerelease) (SUSE Linux)) #1 SMP Fri Nov 18 15:22:13 UTC 2005
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
><4> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000007ffe7600 (usable)
><4> BIOS-e820: 000000007ffe7600 - 0000000080000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
><5>1151MB HIGHMEM available.
><5>896MB LOWMEM available.
><6>found SMP MP-table at 000f8d90
><7>On node 0 totalpages: 524263
><7>  DMA zone: 4096 pages, LIFO batch:1
><7>  Normal zone: 225280 pages, LIFO batch:31
><7>  HighMem zone: 294887 pages, LIFO batch:31
><6>DMI 2.3 present.
><6>Using APIC driver default
><7>ACPI: RSDP (v000 COMPAQ                                ) @ 0x000e9e10
><7>ACPI: RSDT (v001 COMPAQ CPQ0063  0x20040826  0x00000000) @ 0x7fff7640
><7>ACPI: FADT (v001 COMPAQ CANTERW  0x00000001  0x00000000) @ 0x7fff76ec
><7>ACPI: SSDT (v001 COMPAQ  PROJECT 0x00000001 MSFT 0x0100000e) @ 0x7fff8579
><7>ACPI: MADT (v001 COMPAQ CANTERW  0x00000001  0x00000000) @ 0x7fff7760
><7>ACPI: ASF! (v016 COMPAQ CANTERW  0x00000001  0x00000000) @ 0x7fff77c8
><7>ACPI: DSDT (v001 COMPAQ     DSDT 0x00000001 MSFT 0x0100000e) @ 0x00000000
><6>ACPI: PM-Timer IO Port: 0xf808
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><4>Processor #0 15:2 APIC version 20
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
><4>Processor #1 15:2 APIC version 20
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
><4>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
><6>Using ACPI (MADT) for SMP configuration information
><4>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
><4>Built 1 zonelists
><5>Kernel command line: root=/dev/system/root vga=0x317 selinux=0 resume=/dev/sda7 noresume splash=native
><6>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 65536 bytes)
><4>Detected 2993.037 MHz processor.
><6>Using pmtmr for high-res timesource
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 2071328k/2097052k available (2013k kernel code, 24516k reserved, 680k data, 248k init, 1179548k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 5991.26 BogoMIPS (lpj=11982530)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Disabled at boot.
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
><7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
><6>CPU: Trace cache: 12K uops, L1 D cache: 8K
><6>CPU: L2 cache: 512K
><6>CPU: Physical Processor ID: 0
><7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
><6>CPU0: Thermal monitoring enabled
><6>mtrr: v2.0 (20020519)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Checking 'hlt' instruction... OK.
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 2838k freed
><4> not found!
><4>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
><4>Booting processor 1/1 eip 3000
><6>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 5985.34 BogoMIPS (lpj=11970694)
><7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
><7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
><6>CPU: Trace cache: 12K uops, L1 D cache: 8K
><6>CPU: L2 cache: 512K
><6>CPU: Physical Processor ID: 0
><7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#1.
><6>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
><6>CPU1: Thermal monitoring enabled
><4>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
><6>Total of 2 processors activated (11976.61 BogoMIPS).
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 pin1=2 pin2=-1
><6>checking TSC synchronization across 2 CPUs: passed.
><6>Brought up 2 CPUs
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.20 entry at 0xec277, last bus=5
><6>PCI: Using configuration type 1
><6>ACPI: Subsystem revision 20050902
><6>ACPI: Interpreter enabled
><6>ACPI: Using IOAPIC for interrupt routing
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 14 15)
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><4>PCI: Probing PCI hardware (bus 00)
><6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
><4>PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
><4>PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
><7>Boot video device is 0000:01:00.0
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 14 devices
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><6>pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
><6>pnp: 00:0c: ioport range 0x400-0x41f has been reserved
><6>pnp: 00:0c: ioport range 0x420-0x43f has been reserved
><6>pnp: 00:0c: ioport range 0x440-0x45f has been reserved
><6>pnp: 00:0c: ioport range 0x460-0x47f could not be reserved
><6>pnp: 00:0c: ioport range 0xf800-0xf81f could not be reserved
><6>pnp: 00:0c: ioport range 0xf820-0xf83f could not be reserved
><6>pnp: 00:0c: ioport range 0xf840-0xf85f has been reserved
><6>pnp: 00:0c: ioport range 0xf860-0xf87f has been reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: disabled.
><6>  MEM window: f9000000-fa1fffff
><6>  PREFETCH window: f0000000-f81fffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 1000-1fff
><6>  MEM window: f8200000-f84fffff
><6>  PREFETCH window: 88000000-880fffff
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>apm: BIOS not found.
><6>audit: initializing netlink socket (disabled)
><5>audit(1133777899.736:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 6144k, total 131072k
><6>vesafb: mode is 1024x768x16, linelength=2048, pages=1
><6>vesafb: protected mode interface info at 00ff:44f0
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><4>vesafb: Mode is VGA compatible
><6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
><4>Console: switching to colour frame buffer device 128x48
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12
><6>PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
><6>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>loop: loaded (max 8 devices)
><6>mice: PS/2 mouse device common for all mice
><6>input: isa0061/input0//class/input as input0
><6>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 3.39
><6>NET: Registered protocol family 2
><6>input: AT Translated Set 2 keyboard//class/input as input1
><4>IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
><4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 524288 bind 65536)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><6>Starting balanced_irq
><4>Using IPI No-Shortcut mode
><4>ACPI wakeup devices: 
><4>PCI0  HUB COM1 COM2 USB1 USB2 USB3 USB4 EUSB PBTN 
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>Freeing unused kernel memory: 248k freed
><4>logips2pp: Detected unknown logitech mouse model 85
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><5>SCSI subsystem initialized
><6>ICH5: IDE controller at PCI slot 0000:00:1f.1
><4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
><6>ICH5: chipset revision 2
><6>ICH5: not 100% native mode: will probe irqs later
><6>    ide0: BM-DMA at 0x24c0-0x24c7, BIOS settings: hda:pio, hdb:pio
><6>    ide1: BM-DMA at 0x24c8-0x24cf, BIOS settings: hdc:DMA, hdd:pio
><7>Probing IDE interface ide0...
><6>input: ImPS/2 Logitech Wheel Mouse//class/input as input2
><7>Probing IDE interface ide1...
><4>hdc: HL-DT-ST RW/DVD GCC-4481B, ATAPI CD/DVD-ROM drive
><4>ide1 at 0x170-0x177,0x376 on irq 15
><7>libata version 1.12 loaded.
><7>ata_piix version 1.04
><6>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>ata1: SATA max UDMA/133 cmd 0x24F0 ctl 0x280A bmdma 0x24D0 irq 169
><6>ata2: SATA max UDMA/133 cmd 0x24F8 ctl 0x280E bmdma 0x24D8 irq 169
><6>ata1: SATA port has no device.
><6>scsi0 : ata_piix
><7>ata2: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:207f
><6>ata2: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48
><6>ata2: dev 0 configured for UDMA/133
><6>scsi1 : ata_piix
><5>  Vendor: ATA       Model: WDC WD2500JD-00H  Rev: 08.0
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
><5>SCSI device sda: drive cache: write back
><6> sda: sda2 < sda5 sda6 > sda4
><5>sd 1:0:0:0: Attached scsi disk sda
><6>ACPI: PCI Interrupt 0000:05:0d.0[A] -> GSI 18 (level, low) -> IRQ 169
><6>sym0: <1010-66> rev 0x1 at pci 0000:05:0d.0 irq 169
><4>sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
><4>sym0: open drain IRQ line driver, using on-chip SRAM
><4>sym0: using LOAD/STORE-based firmware.
><4>sym0: handling phase mismatch from SCRIPTS.
><5>sym0: SCSI BUS has been reset.
><6>scsi2 : sym-2.2.1
><5>  Vendor: FUJITSU   Model: MAS3367NP         Rev: HPF2
><5>  Type:   Direct-Access                      ANSI SCSI revision: 03
><6> target2:0:0: tagged command queuing enabled, command queue depth 16.
><6> target2:0:0: Beginning Domain Validation
><6> target2:0:0: asynchronous.
><6> target2:0:0: wide asynchronous.
><6> target2:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
><6> target2:0:0: Ending Domain Validation
><5>SCSI device sdb: 71132960 512-byte hdwr sectors (36420 MB)
><5>SCSI device sdb: drive cache: write back
><5>SCSI device sdb: 71132960 512-byte hdwr sectors (36420 MB)
><5>SCSI device sdb: drive cache: write back
><6> sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 >
><5>sd 2:0:0:0: Attached scsi disk sdb
><6>ACPI: CPU0 (power states: C1[C1])
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><6>ACPI: CPU1 (power states: C1[C1])
><6>ACPI: Processor [CPU1] (supports 8 throttling states)
><6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on dm-1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><6>md: Autodetecting RAID arrays.
><6>md: autorun ...
><6>md: ... autorun DONE.
><6>parport: PnPBIOS parport detected.
><6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
><6>lp0: using parport0 (interrupt-driven).
><6>hdc: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(44)
><6>Uniform CD-ROM driver Revision: 3.20
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><3>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
><3>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
><3>hw_random: RNG not detected
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><6>USB Universal Host Controller Interface driver v2.3
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 177
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:1d.0: irq 177, io base 0x00002440
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.1: irq 185, io base 0x00002460
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.2: irq 169, io base 0x00002480
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: debug port 1
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
><6>ehci_hcd 0000:00:1d.7: irq 193, io mem 0xf8500000
><7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 8 ports detected
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>agpgart: Detected an Intel i875 Chipset.
><6>agpgart: AGP aperture is 128M @ 0xe8000000
><3>i8xx TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware
><3>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
><6>ts: Compaq touchscreen protocol output
><3>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
><3>hub 4-0:1.0: over-current change on port 7
><6>tg3.c:v3.42 (Oct 3, 2005)
><6>ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 17 (level, low) -> IRQ 201
><6>eth0: Tigon3 [partno(BCM95782A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:0f:20:3b:e9:c3
><6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] 
><6>eth0: dma_rwctrl[763f0000]
><6>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
><7>PCI: Setting latency timer of device 0000:00:1f.5 to 64
><5>sd 1:0:0:0: Attached scsi generic sg0 type 0
><5>sd 2:0:0:0: Attached scsi generic sg1 type 0
><4>nvidia: module not supported by Novell, setting U taint flag.
><4>nvidia: module license 'NVIDIA' taints kernel.
><6>intel8x0_measure_ac97_clock: measured 58048 usecs
><6>intel8x0: clocking to 48000
><6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 209
><4>NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7676  Fri Jul 29 12:58:54 PDT 2005
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on dm-6, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><5>ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
><5>ReiserFS: dm-0: using ordered data mode
><5>ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: dm-0: checking transaction log (dm-0)
><5>ReiserFS: dm-0: Using r5 hash to sort names
><5>ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
><5>ReiserFS: dm-2: using ordered data mode
><5>ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: dm-2: checking transaction log (dm-2)
><5>ReiserFS: dm-2: Using r5 hash to sort names
><5>ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
><5>ReiserFS: dm-3: using ordered data mode
><5>ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: dm-3: checking transaction log (dm-3)
><5>ReiserFS: dm-3: Using r5 hash to sort names
><5>ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
><5>ReiserFS: dm-4: using ordered data mode
><5>ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: dm-4: checking transaction log (dm-4)
><5>ReiserFS: dm-4: Using r5 hash to sort names
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Mon Dec  5 11:18:47 2005
>
><notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/bin vga=0x317 DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/sbin/udevd ]
>Configuring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
>Configured serial ports
>doneActivating device mapper...
>Creating /dev/mapper/control character device with major:10 minor:63.
>done
>Scanning for LVM volume groups...
>  Reading all physical volumes.  This may take a while...
>  Found volume group "user" using metadata type lvm2
>  Found volume group "system" using metadata type lvm2
>  Found volume group "user_tmp" using metadata type lvm2
>Activating LVM volume groups...
>udevd-event[1698]: run_program: '/lib/udev/create_floppy_devices' abnormal exit
>
>  1 logical volume(s) in volume group "user" now active
>  5 logical volume(s) in volume group "system" now active
>  1 logical volume(s) in volume group "user_tmp" now active
>done
>Starting udevd udevd-event[2044]: run_program: exec of program '/usr/sbin/alsactl' failed
>
>done
>Checking file systems...
>fsck 1.38 (30-Jun-2005)
>/dev/disk/by-uuid/2e8afdaf-0307-43e1-b840-51d9bad36351: clean, 64/18072 files, 23564/72260 blocks
>/dev/user_tmp/home: clean, 953858/10043392 files, 8229189/20080640 blocks
>Reiserfs super block in block 16 on 0xfd00 of format 3.6 with standard journal
>Blocks (total/free): 786432/515190 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/system/opt' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>Reiserfs super block in block 16 on 0xfd02 of format 3.6 with standard journal
>Blocks (total/free): 262144/253913 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/system/tmp' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>Reiserfs super block in block 16 on 0xfd03 of format 3.6 with standard journal
>Blocks (total/free): 1835008/934548 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/system/usr' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>Reiserfs super block in block 16 on 0xfd04 of format 3.6 with standard journal
>Blocks (total/free): 524288/439798 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/system/var' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>doneSetting up kernel module dependencies (if required)done
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sdb1 on /boot type ext2 (rw,acl,user_xattr)
>/dev/mapper/user_tmp-home on /home type ext3 (rw,acl,user_xattr)
>/dev/mapper/system-opt on /opt type reiserfs (rw,acl,user_xattr)
>/dev/mapper/system-tmp on /tmp type reiserfs (rw,acl,user_xattr)
>/dev/mapper/system-usr on /usr type reiserfs (rw,acl,user_xattr)
>/dev/mapper/system-var on /var type reiserfs (rw,acl,user_xattr)
>doneLoading required kernel modules
>doneudevd-event[2138]: run_program: '/lib/udev/create_floppy_devices' abnormal exit
>
>Retry device configurationdone
>Setting up hostname 'hasse'done
>Setting up NIS domainname 'suse.de'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>done
>done
>Setting up the CMOS clockdone
>done
>Creating /var/log/boot.msg
>done<notice>killproc: kill(1001,29)
>Activating remaining swap-devices in /etc/fstab...
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>System Boot Control: The system has been set up
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1001,3)
>
>INIT: Entering runlevel: 5
>Boot logging started on /dev/tty1(/dev/console) at Mon Dec  5 10:18:53 2005
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>
>
>
>startpro<notice>c: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/rootmodprobe: FATAL: Error inserting asus_acpi (/lib/modules/2.6.14.2-3-smp/kernel/drivers/acpi/asus_acpi.ko): No such device
>
>
> _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Starting resource managerdone
>Starting D-BUS daemonUnknown username "named" in message bus configuration file
>done
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no splash=native ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
>Initializing random number generatordone
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no splash=native ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/sbin/acpid ]
>acpid: loading ACPI modules ( ac battery button ) done
>acpid: probing laptop ACPI modules ERROR: Module sony_acpi does not exist in /proc/modules
>ERROR: Module pcc_acpi does not exist in /proc/modules
>done
>Starting acpid done
><notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>Starting HAL daemondone
>Setting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>doneSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
><notice>startproc: execve (/usr/sbin/mdnsd) [ /usr/sbin/mdnsd -f /etc/nss_mdns.conf -b ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/mdnsd ]
><notice>startproc: execve (/usr/sbin/rcd) [ /usr/sbin/rcd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/sbin:/bin:/usr/sbin:/usr/bin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/rcd ]
>Starting mdnsddone
><notice>startproc: execve (/usr/bin/NetworkManager) [ /usr/bin/NetworkManager ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/bin/NetworkManager ]
><notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/sbin/portmap ]
>Starting RPC portmap daemondone
>Loading keymap i386/qwerty/us.map.gz
>doneLoading compose table winkeys shiftctrl latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>doneImporting Net File System (NFS)unused
>Starting the NetworkManagerdone
>Starting Red Carpet Daemondone
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
>Starting nfsboot (sm-notify) done
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting Name Service Cache Daemondone
>Starting cupsddone
>Checking/updating CPU microcode done
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
>Mount SMB/ CIFS File Systems unused
><notice>checkproc: /sbin/portmap 2815
>Starting SSH daemondone
><notice>startproc: execve (/usr/sbin/ypbind) [ /usr/sbin/ypbind ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/ypbind ]
><notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/powersaved ]
>Starting powersaved  (accessing ACPI events over acpid) done
>Starting ypbind . . . . . . . . . . . . . . . No NIS server founddone
><notice>startproc: execve (/opt/gnome/sbin/gdm) [ /opt/gnome/sbin/gdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= LANG=en_US.UTF-8 PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ XCURSOR_THEME=Industrial WINDOWMANAGER=/usr/X11R6/bin/gnome splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/opt/gnome/sbin/gdm ]
>Starting service gdmdone
>Starting service automounterdone
>Starting mail service (Postfix)done
>Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=native SPLASH=no ROOTFS_BLKDEV=/dev/system/root _=/sbin/startproc DAEMON=/usr/sbin/cron ]
>done
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: nfs smbfs
><notice>killproc: kill(2372,3)

Actions: View

Attachments on bug 136872: 59787