Attachment 60198 Details for Bug 137816

lspci

lspci (text/plain), 12.22 KB, created by Stefan Behlert on 2005-12-09 16:10:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Stefan Behlert

Created: 2005-12-09 16:10:42 UTC

Size: 12.22 KB

patch

obsolete

>00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
>00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
>00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
>00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
>00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
>00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
>00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
>00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
>00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
>00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
>00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
>00:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
>00:09.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
>00:09.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
>00:09.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator
>00:0b.0 Network controller: RaLink: Unknown device 0302
>00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
>00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
>00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
>01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760/761 PCI/AGP VGA Display Adapter
>============
>00:00.0 Class 0600: 1039:0760 (rev 03)
>	Subsystem: 1584:5040
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 32
>	Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=32M]
>	Capabilities: [a0] AGP version 3.0
>		Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
>	Capabilities: [d0] HyperTransport: Slave or Primary Interface
>		!!! Possibly incomplete decoding
>		Command: BaseUnitID=0 UnitCnt=9 MastHost- DefDir-
>		Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC+ TXO- <CRCErr=0
>		Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
>		Link Config 1: MLWI=N/C MLWO=N/C LWI=N/C LWO=N/C
>		Revision ID: 1.02
>	Capabilities: [f0] HyperTransport: Interrupt Discovery and Configuration
>
>00:01.0 Class 0604: 1039:0002
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	I/O behind bridge: 0000c000-0000cfff
>	Memory behind bridge: dfe00000-dfefffff
>	Prefetchable memory behind bridge: cfd00000-dfcfffff
>	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>
>00:02.0 Class 0601: 1039:0963 (rev 25)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:02.1 Class 0c05: 1039:0016
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin B routed to IRQ 0
>	Region 4: I/O ports at 0c00 [size=32]
>
>00:02.5 Class 0101: 1039:5513 (prog-if 80 [Master])
>	Subsystem: 1584:5102
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 128
>	Region 4: I/O ports at ffa0 [size=16]
>
>00:02.6 Class 0703: 1039:7013 (rev a0)
>	Subsystem: 1584:4003
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin C routed to IRQ 10
>	Region 0: I/O ports at e400 [size=256]
>	Region 1: I/O ports at e000 [size=128]
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:02.7 Class 0401: 1039:7012 (rev a0)
>	Subsystem: 1584:8403
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (13000ns min, 2750ns max)
>	Interrupt: pin C routed to IRQ 10
>	Region 0: I/O ports at e800 [size=256]
>	Region 1: I/O ports at ec00 [size=128]
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:03.0 Class 0c03: 1039:7001 (rev 0f) (prog-if 10)
>	Subsystem: 1584:5102
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (20000ns max)
>	Interrupt: pin A routed to IRQ 4
>	Region 0: Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
>
>00:03.1 Class 0c03: 1039:7001 (rev 0f) (prog-if 10)
>	Subsystem: 1584:5102
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (20000ns max)
>	Interrupt: pin B routed to IRQ 3
>	Region 0: Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]
>
>00:03.3 Class 0c03: 1039:7002 (prog-if 20)
>	Subsystem: 1584:5102
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (20000ns max)
>	Interrupt: pin D routed to IRQ 5
>	Region 0: Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:04.0 Class 0200: 1039:0900 (rev 91)
>	Subsystem: 1584:5200
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (13000ns min, 2750ns max)
>	Interrupt: pin A routed to IRQ 5
>	Region 0: I/O ports at d800 [size=256]
>	Region 1: Memory at dfffc000 (32-bit, non-prefetchable) [size=4K]
>	Expansion ROM at dffc0000 [disabled] [size=128K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:06.0 Class 0c00: 104c:8023 (prog-if 10)
>	Subsystem: 1584:7000
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (500ns min, 1000ns max), Cache Line Size 10
>	Interrupt: pin A routed to IRQ 5
>	Region 0: Memory at dfffb800 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at dfff4000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>
>00:09.0 Class 0607: 1217:7114 (rev 20)
>	Subsystem: 1584:3008
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 168, Cache Line Size 20
>	Interrupt: pin A routed to IRQ 5
>	Region 0: Memory at 28000000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
>	Memory window 0: 20000000-21fff000 (prefetchable)
>	Memory window 1: 22000000-23fff000
>	I/O window 0: 00001000-000010ff
>	I/O window 1: 00001400-000014ff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>
>00:09.1 Class 0607: 1217:7114 (rev 20)
>	Subsystem: 1584:3008
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 168, Cache Line Size 20
>	Interrupt: pin A routed to IRQ 5
>	Region 0: Memory at 28001000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
>	Memory window 0: 24000000-25fff000 (prefetchable)
>	Memory window 1: 26000000-27fff000
>	I/O window 0: 00001800-000018ff
>	I/O window 1: 00001c00-00001cff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>
>00:09.2 Class 0880: 1217:7110
>	Subsystem: 1584:3008
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin A routed to IRQ 5
>	Region 0: Memory at dfffa000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:0b.0 Class 0280: 1814:0302
>	Subsystem: 1462:b833
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64, Cache Line Size 10
>	Interrupt: pin A routed to IRQ 5
>	Region 0: Memory at dffe8000 (32-bit, non-prefetchable) [size=32K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:18.0 Class 0600: 1022:1100
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Capabilities: [80] HyperTransport: Host or Secondary Interface
>		!!! Possibly incomplete decoding
>		Command: WarmRst+ DblEnd-
>		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>		Revision ID: 1.02
>
>00:18.1 Class 0600: 1022:1101
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:18.2 Class 0600: 1022:1102
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:18.3 Class 0600: 1022:1103
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>01:00.0 Class 0300: 1039:6330
>	Subsystem: 1584:5040
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	BIST result: 00
>	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
>	Region 1: Memory at dfee0000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at cc00 [size=128]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] AGP version 3.0
>		Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
>		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>

Actions: View

Attachments on bug 137816: 60198 | 60199