Attachment 60218 Details for Bug 135499

dmesg output - once again

dmesg.txt (text/plain), 17.80 KB, created by Alexander Lavrinenko on 2005-12-09 20:48:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alexander Lavrinenko

Created: 2005-12-09 20:48:21 UTC

Size: 17.80 KB

patch

obsolete

>Linux version 2.6.14.2-2-default (geeko@buildhost) (gcc version 4.1.0 20051110 (experimental) (SUSE Linux)) #1 Fri Nov 11 10:05:15 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
> BIOS-e820: 000000001ffd0000 - 000000001ffde000 (ACPI data)
> BIOS-e820: 000000001ffde000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000ff780
>On node 0 totalpages: 131024
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126928 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f8100
>ACPI: RSDT (v001 A M I  OEMRSDT  0x08000502 MSFT 0x00000097) @ 0x1ffd0000
>ACPI: FADT (v002 A M I  OEMFACP  0x08000502 MSFT 0x00000097) @ 0x1ffd0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x08000502 MSFT 0x00000097) @ 0x1ffd0390
>ACPI: MCFG (v001 A M I  OEMMCFG  0x08000502 MSFT 0x00000097) @ 0x1ffd03f0
>ACPI: OEMB (v001 A M I  AMI_OEM  0x08000502 MSFT 0x00000097) @ 0x1ffde040
>ACPI: MCFG (v001 A M I  OEMMCFG  0x08000502 MSFT 0x00000097) @ 0x1ffd4e40
>ACPI: SSDT (v001    AMI   CPU1PM 0x00000001 INTL 0x02002026) @ 0x1ffd4e80
>ACPI: DSDT (v001 UW____ F18_____ 0x00000001 INTL 0x02002026) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: local apic disabled
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: TEMPLATE Product ID: ETEMPLATE    APIC at: 0xFEE00000
>Processor #0 6:13 APIC version 20
>I/O APIC #1 Version 32 at 0xFEC00000.
>Processors: 1
>Allocating PCI resources starting at 30000000 (gap: 20000000:ded13000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda3 vga=0x317 selinux=0 ec_burst=1 resume=/dev/sda2 splash=silent
>ACPI: EC burst mode.
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1866.914 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 512760k/524096k available (2008k kernel code, 10720k reserved, 694k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3740.58 BogoMIPS (lpj=7481176)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2496k freed
> not found!
>ACPI: setting ELCR to 0200 (from 0c28)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
>ACPI: 2 duplicate MCFG table ignored.
>PCI: Using MMCONFIG
>ACPI: Subsystem revision 20050902
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:03:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>burst-mode-ec-10-Aug
>ACPI: Embedded Controller [EC0] (gpe 24)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:1e.0
>PCI: Cannot allocate resource region 0 of device 0000:01:07.0
>PCI: Cannot allocate resource region 1 of device 0000:01:07.0
>PCI: Cannot allocate resource region 2 of device 0000:01:07.0
>PCI: Cannot allocate resource region 3 of device 0000:01:07.0
>PCI: Cannot allocate resource region 4 of device 0000:01:07.0
>PCI: Cannot allocate resource region 5 of device 0000:01:07.0
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: faa00000-feafffff
>  PREFETCH window: bfe00000-dfefffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: d000-dfff
>  MEM window: bfc00000-bfcfffff
>  PREFETCH window: bfd00000-bfdfffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 1000-1fff
>  MEM window: fa900000-fa9fffff
>  PREFETCH window: 30000000-300fffff
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Enabling device 0000:00:1c.0 (0106 -> 0107)
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1134165974.868:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>Allocate Port Service[pcie03]
>vesafb: framebuffer at 0xc0000000, mapped to 0xe0880000, using 6144k, total 262144k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:d190
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>vesafb: Mode is VGA compatible
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.0.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: isa0061/input0//class/input as input0
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.39
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard//class/input as input1
>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
>TCP established hash table entries: 32768 (order: 5, 131072 bytes)
>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>P0P1  LAN  AZC P0P5 P0P6 P0P7 P0P3 P0P2 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ICH6: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>ICH6: chipset revision 4
>ICH6: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
>input: SynPS/2 Synaptics TouchPad//class/input as input2
>hda: HL-DT-ST DVD-RW GCA-4080N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>libata version 1.12 loaded.
>sata_via version 1.1
>ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>sata_via(0000:01:07.0): routed to hard irq line 10
>ata1: SATA max UDMA/133 cmd 0x1420 ctl 0x142A bmdma 0x1400 irq 10
>ata2: SATA max UDMA/133 cmd 0x1430 ctl 0x143A bmdma 0x1408 irq 10
>ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:6003 85:3c69 86:3e01 87:6003 88:80ff
>ata1: dev 0 ATA, max UDMA7, 156301488 sectors: lba48
>ata1: dev 0 configured for UDMA/133
>scsi0 : sata_via
>ata2: no device found (phy stat 00000000)
>scsi1 : sata_via
>  Vendor: ATA       Model: SAMSUNG HM080JI   Rev: YC10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (53 C)
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>bootsplash: status on console 0 changed to on
>Adding 2626616k swap on /dev/sda2.  Priority:-1 extents:1 across:2626616k
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>NTFS driver 2.1.24 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>i8xx TCO timer: heartbeat value must be 2<heartbeat<39, using 30
>i8xx TCO timer: initialized (0x0860). heartbeat=30 sec (nowayout=0)
>hw_random: RNG not detected
>Linux agpgart interface v0.101 (c) Dave Jones
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfebffc00
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>drivers/usb/core/inode.c: Unable to create devices usbfs file
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000e480
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'NULL'
>drivers/usb/core/inode.c: error creating usbfs device entry
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
>PCI: setting IRQ 3 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 3, io base 0x0000e800
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000e880
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ieee80211: module not supported by Novell, setting U taint flag.
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 10, io base 0x0000ec00
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>r8169 Gigabit Ethernet driver 2.2LK loaded
>ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>eth0: Identified chip type is 'RTL8169s/8110s'.
>eth0: RTL8169 at 0xe0830c00, 00:03:0d:30:a6:fd, IRQ 3
>ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[fa9ff000-fa9ff7ff]  Max Packet=[2048]
>usb 4-2: new low speed USB device using uhci_hcd and address 2
>ipw2200: module not supported by Novell, setting U taint flag.
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.0
>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>ACPI: PCI Interrupt 0000:01:03.0[A] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/hda_codec.c:1558: hda_codec: model '5stack-digout' is selected
>usbcore: registered new driver hiddev
>input: Logitech USB Optical Mouse//class/input as input3
>input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-8174  Tue Nov 22 17:48:37 PST 2005
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d4971e177bd]
>eth1 (WE) : Driver using old /proc/net/wireless support, please fix driver !
>spurious 8259A interrupt: IRQ7.
>bootsplash: status on console 0 changed to on
>r8169: eth0: link down
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>NET: Registered protocol family 17
>bootsplash: status on console 0 changed to on
>ACPI: AC Adapter [AC0] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Power Button (CM) [PWRB]
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 already at revision 0x20 (current=0x20)
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>cpufreq_conservative: module not supported by Novell, setting U taint flag.
>ieee80211_crypt_wep: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'WEP'
>ipw2200: Firmware error detected.  Restarting.
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c0363080(lo)
>IPv6 over IPv4 tunneling driver
>bootsplash: status on console 0 changed to on
>eth1: no IPv6 routers present
>eth0: no IPv6 routers present
>Bluetooth: Core ver 2.7
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>psmouse.c: TouchPad at isa0060/serio2/input0 lost synchronization, throwing 4 bytes away.
>psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1
>psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1
>psmouse.c: TouchPad at isa0060/serio2/input0 - driver resynched.

Actions: View

Attachments on bug 135499: 58642 | 60218 | 60219