Attachment 61070 Details for Bug 139563

the dmesg output

dmesg.txt (text/plain), 13.34 KB, created by Rick Centeno on 2005-12-16 10:55:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rick Centeno

Created: 2005-12-16 10:55:49 UTC

Size: 13.34 KB

patch

obsolete

>dLinux version 2.6.13-15.7-default (geeko@buildhost) (gcc version 4.0.2
>20050901 (prerelease) (SUSE Linux)) #1 Tue Nov 29 14:32:29 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 00000000000e8640 (reserved)
> BIOS-e820: 00000000000e8640 - 00000000000e8840 (ACPI NVS)
> BIOS-e820: 00000000000e8840 - 00000000000ec000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffe0000 (usable)
> BIOS-e820: 000000001ffe0000 - 000000001fff0000 (ACPI data)
> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>On node 0 totalpages: 131040
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126944 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 TOSHIB                                ) @ 0x000f4fd0
>ACPI: RSDT (v001 TOSHIB 750      0x00970814 TASM 0x04010000) @
>0x1ffe0000
>ACPI: FADT (v001 TOSHIB 750      0x00970814 TASM 0x04010000) @
>0x1ffe0054
>ACPI: DSDT (v001 TOSHIB 8100     0x20000614 MSFT 0x0100000a) @
>0x00000000
>ACPI: PM-Timer IO Port: 0xfe08
>ACPI: local apic disabled
>Allocating PCI resources starting at 20000000 (gap: 20000000:dff80000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda2 vga=0x314 selinux=0
>resume=/dev/hda3  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 597.888 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 513624k/524160k available (2029k kernel code, 9964k reserved,
>695k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode...
>Ok.
>Calibrating delay using timer specific routine.. 1196.65 BogoMIPS
>(lpj=2393315)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
>00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000
>00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000
>00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel Pentium III (Coppermine) stepping 06
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1701k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0800)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfee03, last bus=21
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12)
>    ACPI-0125: *** Warning: Blank IRQ resource
>ACPI: PCI Interrupt Link [LNKE] (IRQs) *0, disabled.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Power Resource [PIHD] (on)
>ACPI: Power Resource [PMHD] (on)
>ACPI: Power Resource [PDOC] (off)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: Power Resource [PFAN] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>PCI: setting IRQ 13 as level-triggered
>pnp: PnP ACPI: found 13 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a
>report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f0000000-f7ffffff
>  PREFETCH window: 28000000-280fffff
>PCI: Bus 2, cardbus bridge: 0000:00:0b.0
>  IO window: 00001000-00001fff
>  IO window: 00002000-00002fff
>  PREFETCH window: 20000000-21ffffff
>  MEM window: 22000000-23ffffff
>PCI: Bus 6, cardbus bridge: 0000:00:0b.1
>  IO window: 00003000-00003fff
>  IO window: 00004000-00004fff
>  PREFETCH window: 24000000-25ffffff
>  MEM window: 26000000-27ffffff
>PCI: Enabling device 0000:00:0b.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKA] -> GSI 11 (level,
>low) -> IRQ 11
>PCI: Enabling device 0000:00:0b.1 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LNKB] -> GSI 11 (level,
>low) -> IRQ 11
>apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1134719646.876:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>Limiting direct PCI/PCI transfers.
>vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 3750k,
>total 8192k
>vesafb: mode is 800x600x16, linelength=1600, pages=7
>vesafb: protected mode interface info at c000:8751
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size
>51518 bytes,<6>...found (800x600, 8809 bytes, v3).
>Console: switching to colour frame buffer device 99x34
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
>TCP established hash table entries: 32768 (order: 6, 262144 bytes)
>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices:
> COM  USB VIY0 VIY1 MODM  LAN DLAN NOV0  LID
>ACPI: (supports S0 S1 S3 S4 S4bios S5)
>Freeing unused kernel memory: 204k freed
>logips2pp: Detected unknown logitech mouse model 0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with
>idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:05.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
>hda: TOSHIBA MK6015MAP, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 11733120 sectors (6007 MB), CHS=12416/15/63, UDMA(33)
>hda: cache flushes not supported
> hda: hda1 hda2 hda3
>Probing IDE interface ide1...
>hdc: CD-224E-BA, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THRM] (27 C)
>hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: Fan [FAN] (off)
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
>ReiserFS: hda2: using ordered data mode
>ReiserFS: hda2: journal params: device hda2, size 8192, journal first
>block 18, max trans len 1024, max batch 900, max commit age 30, max
>trans age 30
>ReiserFS: hda2: checking transaction log (hda2)
>ReiserFS: hda2: Using r5 hash to sort names
>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 257032k swap on /dev/hda3.  Priority:-1 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3
>[PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:05.2[D] -> Link [LNKD] -> GSI 11 (level,
>low) -> IRQ 11
>uhci_hcd 0000:00:05.2: UHCI Host Controller
>uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:05.2: irq 11, io base 0x0000ff80
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 256M @ 0xd0000000
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 4 ports detected
>piix4_smbus 0000:00:05.3: Found 0000:00:05.3 device
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
>NET: Registered protocol family 23
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKC] -> GSI 11 (level,
>low) -> IRQ 11
>IrDA: Registered device irda0
>toshoboe: Using multiple tasks, version $Id: donauboe.c V2.18 ven jan 10
>03:14:16 2003$
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKA] -> GSI 11 (level,
>low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:00:0b.0 [1179:0001]
>Yenta: ISA IRQ mask 0x0438, PCI irq 11
>Socket status: 30000020
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LNKB] -> GSI 11 (level,
>low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:00:0b.1 [1179:0001]
>Yenta: ISA IRQ mask 0x0438, PCI irq 11
>Socket status: 30000007
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 11 (level,
>low) -> IRQ 11
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:00:0f.0: 3Com PCI 3c905C Tornado at 0xfd80. Vers LK1.1.19
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 11 (level,
>low) -> IRQ 11
>bootsplash: status on console 0 changed to on
>PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level,
>low) -> IRQ 11
>rt2500 1.1.0 BETA3 2005/07/31 http://rt2x00.serialmonkey.com
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKD] -> GSI 11 (level,
>low) -> IRQ 11
>NET: Registered protocol family 17
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
>toshiba_acpi:     HCI method: \_SB_.VALD.GHCI
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>bootsplash: status on console 0 changed to on
>eth0: no IPv6 routers present
>ra0: no IPv6 routers present
>powernow: This module only works with AMD K7 CPUs
>bootsplash: status on console 0 changed to on
>bootsplash: status on console 0 changed to on
>subfs 0.9
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>subfs: unsuccessful attempt to mount media (256)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SCSI subsystem initialized
>st: Version 20050501, fixed bufsize 32768, s/g segs 256
>

Actions: View

Attachments on bug 139563: 61069 | 61070 | 61071