Attachment 61811 Details for Bug 141105

dmesg from boot to BUG.

dmesg (text/plain), 17.04 KB, created by Forgotten User ZhJd0F0L3x on 2005-12-29 18:31:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Forgotten User ZhJd0F0L3x

Created: 2005-12-29 18:31:47 UTC

Size: 17.04 KB

patch

obsolete

>Linux version 2.6.13-15.7-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Nov 29 14:32:29 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000017fec000 (usable)
> BIOS-e820: 0000000017fec000 - 0000000017fef000 (ACPI data)
> BIOS-e820: 0000000017fef000 - 0000000017fff000 (reserved)
> BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>383MB LOWMEM available.
>On node 0 totalpages: 98284
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 94188 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 ASUS                                  ) @ 0x000f6a90
>ACPI: RSDT (v001 ASUS   A7V      0x30303031 MSFT 0x31313031) @ 0x17fec000
>ACPI: FADT (v001 ASUS   A7V      0x30303031 MSFT 0x31313031) @ 0x17fec080
>ACPI: BOOT (v001 ASUS   A7V      0x30303031 MSFT 0x31313031) @ 0x17fec040
>ACPI: DSDT (v001   ASUS A7V      0x00001000 MSFT 0x0100000b) @ 0x00000000
>ACPI: PM-Timer IO Port: 0xe408
>ACPI: local apic disabled
>Allocating PCI resources starting at 18000000 (gap: 18000000:e7ff0000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda2 vga=0x314 selinux=0 sysrq=yes resume=/dev/hda1  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1110.055 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 383960k/393136k available (2029k kernel code, 8616k reserved, 695k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2222.12 BogoMIPS (lpj=4444254)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 64K (64 bytes/line)
>CPU: After all inits, caps: 0383f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: AMD Duron(tm) Processor stepping 00
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1762k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0e20)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
>pnp: 00:02: ioport range 0xe800-0xe80f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e2800000-e3dfffff
>  PREFETCH window: e3f00000-e5ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>Simple Boot Flag at 0x3a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1135842619.188:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>PCI: Disabling Via external APIC routing
>vesafb: framebuffer at 0xe4000000, mapped to 0xd8880000, using 3750k, total 32768k
>vesafb: mode is 800x600x16, linelength=1600, pages=16
>vesafb: protected mode interface info at c000:7b00
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 51518 bytes,<6>...found (800x600, 8809 bytes, v3).
>Console: switching to colour frame buffer device 99x34
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 controller doesn't have AUX irq; using default 0xc
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>PWRB PCI0 UAR1 UAR2 USB0 USB1 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:04.1
>    ACPI-0212: *** Warning: Device is not power manageable
>VP_IDE: chipset revision 16
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:04.1
>    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: ST3120022A, ATA DISK drive
>hdb: LITE-ON LTR-24102B, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 1024KiB
>hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(66)
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>Probing IDE interface ide1...
>hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>PDC20265: IDE controller at PCI slot 0000:00:11.0
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PDC20265: chipset revision 2
>PDC20265: ROM enabled at 0x18040000
>PDC20265: 100% native mode on irq 10
>PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
>PDC20265: FORCING BURST BIT 0x00->0x01 ACTIVE
>    ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:pio, hdf:pio
>    ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio, hdh:DMA
>Probing IDE interface ide2...
>hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>Probing IDE interface ide3...
>hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 16 throttling states)
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI Interrupt 0000:00:04.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
>uhci_hcd 0000:00:04.2: UHCI Host Controller
>uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:04.2: irq 9, io base 0x0000d400
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:04.3[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
>uhci_hcd 0000:00:04.3: UHCI Host Controller
>uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:04.3: irq 9, io base 0x0000d000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>usb 1-2: new low speed USB device using uhci_hcd and address 3
>usbcore: registered new driver hiddev
>input: USB HID v1.00 Keyboard [Cypress PS/2 to USB Adapter] on usb-0000:00:04.2-2
>input: USB HID v1.00 Mouse [Cypress PS/2 to USB Adapter] on usb-0000:00:04.2-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>usb 1-1.2: new low speed USB device using uhci_hcd and address 4
>input: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:04.2-1.2
>input,hiddev96: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:04.2-1.2
>bootsplash: status on console 0 changed to on
>Adding 1028120k swap on /dev/hda1.  Priority:-1 extents:1
>ReiserFS: hda3: found reiserfs format "3.6" with standard journal
>ReiserFS: hda3: using ordered data mode
>ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda3: checking transaction log (hda3)
>ReiserFS: hda3: Using r5 hash to sort names
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
>parport_pc: VIA parallel port: io=0x378, irq=7
>lp0: using parport0 (interrupt-driven).
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
>agpgart: AGP aperture is 32M @ 0xe6000000
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
>Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
>tulip0:  EEPROM default media type Autosense.
>tulip0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block.
>tulip0:  MII transceiver #1 config 3100 status 7829 advertising 05e1.
>tulip0:  Advertising 01e1 on PHY 1, previously advertising 05e1.
>eth0: Digital DS21143 Tulip rev 65 at 0001a400, 00:40:C7:97:73:71, IRQ 5.
>Linux video capture interface: v1.00
>bootsplash: status on console 0 changed to on
>saa7130/34: v4l2 driver version 0.2.14 loaded
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>saa7134[0]: found at 0000:00:0b.0, rev: 1, irq: 10, latency: 32, mmio: 0xe1800000
>saa7134[0]: subsystem: 153b:1142, board: Terratec Cinergy 400 TV [card=8,autodetected]
>saa7134[0]: board init: gpio is 50000
>saa7134[0]: registered input device for IR
>Driver for 1-wire Dallas network protocol.
>saa7134[0]: i2c eeprom 00: 3b 15 42 11 ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> : chip found @ 0xc0 (saa7134[0])
> : All bytes are equal. It is not a TEA5767
>tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>saa7134[0]: registered device video0 [v4l2]
>saa7134[0]: registered device vbi0
>matrox_w1 0000:01:00.0: Matrox G400 GPIO transport layer for 1-wire.
>gameport: FM801 is pci0000:00:0d.1/gameport0, io 0x9800, speed 1864kHz
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
>saa7146: register extension 'budget_ci dvb'.
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>saa7146: found saa7146 @ mem d8fb4000 (revision 1, irq 11) (0x13c2,0x100f).
>DVB: registering new adapter (TT-Budget/WinTV-NOVA-CI PCI).
>adapter has MAC addr = 00:d0:5c:22:3a:d2
>DVB: registering frontend 0 (ST STV0299 DVB-S)...
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
>bootsplash: status on console 0 changed to on
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist
>NFSD: starting 90-second grace period
>bootsplash: status on console 0 changed to on
>eth0: no IPv6 routers present
>------------[ cut here ]------------
>kernel BUG at mm/rmap.c:493!
>invalid operand: 0000 [#1]
>Modules linked in: autofs4 nfsd exportfs ipv6 snd_pcm_oss snd_mixer_oss snd_seq_midi snd_seq_midi_event snd_opl3_synth snd_seq_instr snd_seq_midi_emul snd_ainstr_fm snd_seq button battery ac edd budget_ci tda1004x firmware_class budget_core dvb_core saa7146 ttpci_eeprom stv0299 tuner snd_fm801 snd_tea575x_tuner snd_ac97_codec fm801_gp snd_pcm snd_page_alloc snd_ac97_bus gameport snd_opl3_lib matrox_w1 wire saa7134 snd_timer snd_hwdep snd_mpu401_uart video_buf snd_rawmidi v4l2_common v4l1_compat via686a i2c_sensor i2c_viapro i2c_core ir_common videodev snd_seq_device snd soundcore tulip generic pci_hotplug via_agp agpgart parport_pc lp parport reiserfs ext3 jbd usbhid uhci_hcd usbcore fan thermal processor ide_cd cdrom pdc202xx_old via82cxxx ide_disk ide_core
>CPU:    0
>EIP:    0060:[<c014f512>]    Not tainted VLI
>EFLAGS: 00210286   (2.6.13-15.7-default) 
>EIP is at page_remove_rmap+0x32/0x40
>eax: ffffffff   ebx: c600136c   ecx: c03ee500   edx: c10bdca0
>esi: c10bdca0   edi: 00000020   ebp: 470db000   esp: c8249ee4
>ds: 007b   es: 007b   ss: 0068
>Process dvbcut (pid: 8607, threadinfo=c8248000 task=d7f45590)
>Stack: c0149427 00000000 4713b000 c03ee500 4713b000 c8785474 4713b000 4713afff 
>       c01495c3 4713b000 00000000 c03ee500 4713b000 00080000 d1418ddc 490bb000 
>       c0149716 4713b000 00000000 c8248000 c4beeb80 c8249f74 00080000 00000000 
>Call Trace:
> [<c0149427>] zap_pte_range+0xe7/0x200
> [<c01495c3>] unmap_page_range+0x83/0xd0
> [<c0149716>] unmap_vmas+0x106/0x220
> [<c014d46d>] unmap_region+0x6d/0x100
> [<c014d73e>] do_munmap+0xae/0xf0
> [<c014d7bb>] sys_munmap+0x3b/0x60
> [<c0102d1b>] sysenter_past_esp+0x54/0x79
>Code: 75 1f 83 42 08 ff 0f 98 c0 84 c0 75 01 c3 8b 42 08 40 78 17 83 ca ff b8 10 00 00 00 e9 d8 1f ff ff 0f 0b ea 01 37 52 31 c0 eb d7 <0f> 0b ed 01 37 52 31 c0 eb df 8d 74 26 00 55 57 56 53 57 89 d3 
> <6>note: dvbcut[8607] exited with preempt_count 1
>scheduling while atomic: dvbcut/0x00000001/8607
> [<c02f9dfc>] schedule+0x55c/0x610
> [<c011cac1>] vprintk+0x251/0x270
> [<c011cac1>] vprintk+0x251/0x270
> [<c011c863>] printk+0x13/0x20
> [<c02fa8a5>] rwsem_down_read_failed+0x75/0x180
> [<c01041f7>] show_trace+0x27/0x70
> [<c011f8b1>] .text.lock.exit+0x27/0x86
> [<c011e78d>] do_exit+0xdd/0x350
> [<c010468e>] die+0x13e/0x140
> [<c0104940>] do_invalid_op+0x0/0xa0
> [<c01049d1>] do_invalid_op+0x91/0xa0
> [<c014f512>] page_remove_rmap+0x32/0x40
> [<c011934c>] scheduler_tick+0x10c/0x340
> [<c011444c>] smp_local_timer_interrupt+0xc/0x50
> [<c0107c90>] timer_interrupt+0x50/0x70
> [<c0120bc3>] __do_softirq+0x43/0xa0
> [<c0103f0f>] error_code+0x4f/0x60
> [<c014f512>] page_remove_rmap+0x32/0x40
> [<c0149427>] zap_pte_range+0xe7/0x200
> [<c01495c3>] unmap_page_range+0x83/0xd0
> [<c0149716>] unmap_vmas+0x106/0x220
> [<c014d46d>] unmap_region+0x6d/0x100
> [<c014d73e>] do_munmap+0xae/0xf0
> [<c014d7bb>] sys_munmap+0x3b/0x60
> [<c0102d1b>] sysenter_past_esp+0x54/0x79

Actions: View

Attachments on bug 141105: 61811 | 61812