Bugzilla – Attachment 61894 Details for
Bug 141241
KOTD locks up under heavy I/O load
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
CPU info, output from lspci
details.txt (text/plain), 14.79 KB, created by
Manfred Hollstein
on 2006-01-03 15:36:46 UTC
(
hide
)
Description:
CPU info, output from lspci
Filename:
MIME Type:
Creator:
Manfred Hollstein
Created:
2006-01-03 15:36:46 UTC
Size:
14.79 KB
patch
obsolete
># cat /proc/cpuinfo >processor : 0 >vendor_id : AuthenticAMD >cpu family : 15 >model : 43 >model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ >stepping : 1 >cpu MHz : 2002.658 >cache size : 512 KB >physical id : 0 >siblings : 2 >core id : 0 >cpu cores : 2 >fpu : yes >fpu_exception : yes >cpuid level : 1 >wp : yes >flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy >bogomips : 4014.95 >TLB size : 1024 4K pages >clflush size : 64 >cache_alignment : 64 >address sizes : 40 bits physical, 48 bits virtual >power management: ts fid vid ttp > >processor : 1 >vendor_id : AuthenticAMD >cpu family : 15 >model : 43 >model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ >stepping : 1 >cpu MHz : 2002.658 >cache size : 512 KB >physical id : 0 >siblings : 2 >core id : 1 >cpu cores : 2 >fpu : yes >fpu_exception : yes >cpuid level : 1 >wp : yes >flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm cmp_legacy >bogomips : 4005.39 >TLB size : 1024 4K pages >clflush size : 64 >cache_alignment : 64 >address sizes : 40 bits physical, 48 bits virtual >power management: ts fid vid ttp > ># lspci -vvv >00:00.0 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge > Subsystem: ASUSTeK Computer Inc.: Unknown device 80a3 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- > Latency: 64 > Region 0: Memory at 00000000dc000000 (32-bit, prefetchable) [size=64M] > Capabilities: [80] AGP version 3.0 > Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 > Command: RQ=1 ArqSz=0 Cal=2 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] HyperTransport: Slave or Primary Interface > !!! Possibly incomplete decoding > Command: BaseUnitID=0 UnitCnt=3 MastHost- DefDir- > Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 > Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 > Link Config 1: MLWI=8bit MLWO=8bit LWI=8bit LWO=8bit > Revision ID: 1.02 > Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration > >00:00.1 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > >00:00.2 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > >00:00.3 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > >00:00.4 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > >00:00.7 Host bridge: VIA Technologies, Inc. K8T800Pro Host Bridge > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > >00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: faf00000-fbffffff > Prefetchable memory behind bridge: e0000000-f9ffffff > Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > >00:0a.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) > Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (5750ns min, 7750ns max), Cache Line Size 10 > Interrupt: pin A routed to IRQ 177 > Region 0: Memory at 00000000faa00000 (32-bit, non-prefetchable) [size=16K] > Region 1: I/O ports at a800 [size=256] > Expansion ROM at 00000000fa900000 [disabled] [size=128K] > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > >00:0e.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) > Subsystem: Creative Labs SB Audigy 2 ZS (SB0350) > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (500ns min, 5000ns max) > Interrupt: pin A routed to IRQ 201 > Region 0: I/O ports at b000 [size=64] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > >00:0e.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04) > Subsystem: Creative Labs SB Audigy MIDI/Game Port > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Region 0: I/O ports at b400 [size=8] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > >00:0e.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) (prog-if 10 [OHCI]) > Subsystem: Creative Labs SB Audigy FireWire Port > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (500ns min, 1000ns max), Cache Line Size 10 > Interrupt: pin B routed to IRQ 185 > Region 0: Memory at 00000000fac00000 (32-bit, non-prefetchable) [size=2K] > Region 1: Memory at 00000000fab00000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME+ > >00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) > Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 > Interrupt: pin B routed to IRQ 169 > Region 0: I/O ports at d400 [size=8] > Region 1: I/O ports at d000 [size=4] > Region 2: I/O ports at c800 [size=8] > Region 3: I/O ports at c400 [size=4] > Region 4: I/O ports at c000 [size=16] > Region 5: I/O ports at b800 [size=256] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > >00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) > Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 > Interrupt: pin A routed to IRQ 169 > Region 4: I/O ports at fc00 [size=16] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > >00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) > Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size 10 > Interrupt: pin A routed to IRQ 193 > Region 4: I/O ports at d800 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > >00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) > Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size 10 > Interrupt: pin A routed to IRQ 193 > Region 4: I/O ports at e000 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME+ > >00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) > Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size 10 > Interrupt: pin B routed to IRQ 193 > Region 4: I/O ports at e400 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > >00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI]) > Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size 10 > Interrupt: pin B routed to IRQ 193 > Region 4: I/O ports at e800 [size=32] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > >00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64, Cache Line Size 10 > Interrupt: pin C routed to IRQ 193 > Region 0: Memory at 00000000fae00000 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > >00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] > Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X motherboard > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > >00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Capabilities: [80] HyperTransport: Host or Secondary Interface > !!! Possibly incomplete decoding > Command: WarmRst+ DblEnd- > Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 > Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit > Revision ID: 1.02 > >00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > >00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > >00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- > >01:00.0 VGA compatible controller: nVidia Corporation NV36.2 [GeForce FX 5700] (rev a1) (prog-if 00 [VGA]) > Subsystem: CardExpert Technology: Unknown device 0620 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 248 (1250ns min, 250ns max) > Interrupt: pin A routed to IRQ 185 > Region 0: Memory at 00000000fb000000 (32-bit, non-prefetchable) [size=16M] > Region 1: Memory at 00000000e0000000 (32-bit, prefetchable) [size=256M] > [virtual] Expansion ROM at 00000000faf00000 [disabled] [size=128K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [44] AGP version 3.0 > Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 > Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x8 >
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 141241
: 61894 |
61918
|
61919