Attachment 61919 Details for Bug 141241

Output from running "dmesg" on the SL-10.0 system

dmesg.log (text/plain), 18.47 KB, created by Manfred Hollstein on 2006-01-03 20:33:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Manfred Hollstein

Created: 2006-01-03 20:33:21 UTC

Size: 18.47 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/md2 selinux=0 noresume elevator=cfq vga=0x346 splash=none 3)
>Linux version 2.6.15-rc7-git6-20060102172536-smp (geeko@buildhost) (gcc version 4.1.0 20051221 (prerelease) (SUSE Linux)) #1 SMP Mon Jan 2 17:25:36 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x00000000000fa880
>ACPI: XSDT (v001 A M I  OEMXSDT  0x10000513 MSFT 0x00000097) @ 0x000000007ffb0100
>ACPI: FADT (v003 A M I  OEMFACP  0x10000513 MSFT 0x00000097) @ 0x000000007ffb0290
>ACPI: MADT (v001 A M I  OEMAPIC  0x10000513 MSFT 0x00000097) @ 0x000000007ffb0390
>ACPI: OEMB (v001 A M I  OEMBIOS  0x10000513 MSFT 0x00000097) @ 0x000000007ffc0040
>ACPI: DSDT (v001  A0277 A0277001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000007ffb0000
>Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000007ffb0000
>On node 0 totalpages: 516016
>  DMA zone: 3014 pages, LIFO batch:0
>  DMA32 zone: 513002 pages, LIFO batch:31
>  Normal zone: 0 pages, LIFO batch:0
>  HighMem zone: 0 pages, LIFO batch:0
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:11 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7f780000)
>Checking aperture...
>CPU 0: aperture @ dc000000 size 64 MB
>SMP: Allowing 3 CPUs, 1 hotplug CPUs
>Built 1 zonelists
>Kernel command line: root=/dev/md2 selinux=0 noresume elevator=cfq vga=0x346 splash=none 3
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 2002.680 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Memory: 2058172k/2096832k available (1851k kernel code, 38272k reserved, 826k data, 204k init)
>Calibrating delay using timer specific routine.. 4016.27 BogoMIPS (lpj=8032558)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(2) -> Node 0 -> Core 0
>mtrr: v2.0 (20020519)
>checking if image is initramfs... it is
>Using local APIC timer interrupts.
>Detected 12.516 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4005.50 BogoMIPS (lpj=8011010)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(2) -> Node 0 -> Core 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 1 cycles, maxerr 514 cycles)
>Brought up 2 CPUs
>Disabling vsyscall due to use of PM timer
>time.c: Using PM based timekeeping.
>testing NMI watchdog ... OK.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050902
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 64M @ 0xdc000000
>PCI-DMA: Disabling IOMMU.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: faf00000-fbffffff
>  PREFETCH window: e0000000-f9ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1136321568.904:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>0000:00:10.4 EHCI: early BIOS handoff failed (BIOS bug ?)
>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000080000, using 15000k, total 262144k
>vesafb: mode is 1600x1200x16, linelength=3200, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>vesafb: Mode is not VGA compatible
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 162561 bytes,<6>...found (1600x1200, 25468 bytes, v3).
>Console: switching to colour frame buffer device 200x75
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 64 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard as /class/input/input1
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>PCI0 PS2K AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>libata version 1.20 loaded.
>sata_via 0000:00:0f.0: version 1.1
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
>PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9
>sata_via 0000:00:0f.0: routed to hard irq line 9
>ata1: SATA max UDMA/133 cmd 0xD400 ctl 0xD002 bmdma 0xC000 irq 169
>ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xC008 irq 169
>ata1: no device found (phy stat 00000000)
>scsi0 : sata_via
>ata2: no device found (phy stat 00000000)
>scsi1 : sata_via
>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
>PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: ST3120022A, ATA DISK drive
>hdb: PLEXTOR DVD-ROM PX-130A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 1024KiB
>hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
>Probing IDE interface ide1...
>hdc: ST3120022A, ATA DISK drive
>hdd: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: max request size: 1024KiB
>hdc: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
>hdc: cache flushes supported
> hdc: hdc1 hdc2 hdc4 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 >
>hdb: ATAPI 50X DVD-ROM drive, 512kB Cache
>Uniform CD-ROM driver Revision: 3.20
>md: raid1 personality registered as nr 3
>cdrom: open failed.
>hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
>md: Autodetecting RAID arrays.
>cdrom: open failed.
>md: autorun ...
>md: considering hdc10 ...
>md:  adding hdc10 ...
>md: hdc9 has different UUID to hdc10
>md: hdc8 has different UUID to hdc10
>md: hdc7 has different UUID to hdc10
>md: hdc2 has different UUID to hdc10
>md: hdc1 has different UUID to hdc10
>md:  adding hda10 ...
>md: hda9 has different UUID to hdc10
>md: hda8 has different UUID to hdc10
>md: hda7 has different UUID to hdc10
>md: hda2 has different UUID to hdc10
>md: hda1 has different UUID to hdc10
>md: created md5
>md: bind<hda10>
>md: bind<hdc10>
>md: running: <hdc10><hda10>
>md: personality 2 is not loaded!
>md: do_md_run() returned -22
>md: md5 stopped.
>Losing some ticks... checking if CPU frequency changed.
>md: unbind<hdc10>
>md: export_rdev(hdc10)
>md: unbind<hda10>
>md: export_rdev(hda10)
>md: considering hdc9 ...
>md:  adding hdc9 ...
>md: hdc8 has different UUID to hdc9
>md: hdc7 has different UUID to hdc9
>md: hdc2 has different UUID to hdc9
>md: hdc1 has different UUID to hdc9
>md:  adding hda9 ...
>md: hda8 has different UUID to hdc9
>md: hda7 has different UUID to hdc9
>md: hda2 has different UUID to hdc9
>md: hda1 has different UUID to hdc9
>md: created md4
>md: bind<hda9>
>md: bind<hdc9>
>md: running: <hdc9><hda9>
>raid1: raid set md4 active with 2 out of 2 mirrors
>md: considering hdc8 ...
>md:  adding hdc8 ...
>md: hdc7 has different UUID to hdc8
>md: hdc2 has different UUID to hdc8
>md: hdc1 has different UUID to hdc8
>md:  adding hda8 ...
>md: hda7 has different UUID to hdc8
>md: hda2 has different UUID to hdc8
>md: hda1 has different UUID to hdc8
>md: created md3
>md: bind<hda8>
>md: bind<hdc8>
>md: running: <hdc8><hda8>
>raid1: raid set md3 active with 2 out of 2 mirrors
>md: considering hdc7 ...
>md:  adding hdc7 ...
>md: hdc2 has different UUID to hdc7
>md: hdc1 has different UUID to hdc7
>md:  adding hda7 ...
>md: hda2 has different UUID to hdc7
>md: hda1 has different UUID to hdc7
>md: created md2
>md: bind<hda7>
>md: bind<hdc7>
>md: running: <hdc7><hda7>
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: considering hdc2 ...
>md:  adding hdc2 ...
>md: hdc1 has different UUID to hdc2
>md:  adding hda2 ...
>md: hda1 has different UUID to hdc2
>md: created md1
>md: bind<hda2>
>md: bind<hdc2>
>md: running: <hdc2><hda2>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: considering hdc1 ...
>md:  adding hdc1 ...
>md:  adding hda1 ...
>md: created md0
>md: bind<hda1>
>md: bind<hdc1>
>md: running: <hdc1><hda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: ... autorun DONE.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 506008k swap on /dev/hda6.  Priority:-1 extents:1 across:506008k
>Adding 506008k swap on /dev/hdc6.  Priority:-2 extents:1 across:506008k
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>md: md5 stopped.
>md: bind<hdc10>
>md: bind<hda10>
>md: raid0 personality registered as nr 2
>md5: setting max_sectors to 128, segment boundary to 32767
>raid0: looking at hda10
>raid0:   comparing hda10(32194112) with hda10(32194112)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at hdc10
>raid0:   comparing hdc10(32194112) with hda10(32194112)
>raid0:   EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 64388224 blocks.
>raid0 : conf->hash_spacing is 64388224 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 8 bytes for hash.
>md: Autodetecting RAID arrays.
>md: could not bd_claim hdc10.
>md: could not bd_claim hda10.
>md: autorun ...
>md: ... autorun DONE.
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem md4
>Ending clean XFS mount for filesystem: md4
>XFS mounting filesystem md5
>Ending clean XFS mount for filesystem: md5
>lp: driver loaded but no devices found
>skge: module not supported by Novell, setting U taint flag.
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 177
>skge 1.2 addr 0xfaa00000 irq 177 chip Yukon-Lite rev 9
>skge eth0: addr 00:13:d4:64:6f:53
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 185
>PCI: Via IRQ fixup for 0000:00:10.0, from 5 to 9
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 185, io base 0x0000d800
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:00:0e.2[B] -> GSI 16 (level, low) -> IRQ 193
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193]  MMIO=[fac00000-fac007ff]  Max Packet=[2048]
>gameport: EMU10K1 is pci0000:00:0e.1/gameport0, io 0xb400, speed 828kHz
>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 185
>PCI: Via IRQ fixup for 0000:00:10.1, from 5 to 9
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 185, io base 0x0000e000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 201
>ALSA sound/pci/emu10k1/emufx.c:1432: Installing spdif_bug patch: Audigy 2 ZS [SB0350]
>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 185
>PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 9
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 185, io base 0x0000e400
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 185
>PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 9
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 185, io base 0x0000e800
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 185
>PCI: Via IRQ fixup for 0000:00:10.4, from 10 to 9
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: irq 185, io mem 0xfae00000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>usb 1-1: device not accepting address 2, error -71
>cdrom: open failed.
>cdrom: open failed.
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c0151081b8b]
>usb 1-1: new full speed USB device using uhci_hcd and address 4
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 3 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 5
>usb 1-2: configuration #1 chosen from 2 choices
>usbcore: registered new driver hiddev
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>skge eth0: enabling interface
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>skge eth0: Link is up at 1000 Mbps, full duplex, flow control tx and rx
>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
>hwmon: module not supported by Novell, setting U taint flag.
>hwmon_vid: module not supported by Novell, setting U taint flag.
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
>NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module  1.0-8178  Wed Dec 14 16:58:07 PST 2005
>nvidia: module not supported by Novell, setting U taint flag.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
>NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module  1.0-8178  Wed Dec 14 16:58:07 PST 2005
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>NVRM: Xid: 16, Head 00000000 Count 00004bb4
>NVRM: Xid: 16, Head 00000000 Count 00004bb5
>NVRM: Xid: 16, Head 00000000 Count 00004bb6
>NVRM: Xid: 16, Head 00000000 Count 00004bb7
>NVRM: Xid: 16, Head 00000000 Count 00004bb8
>NVRM: Xid: 16, Head 00000000 Count 00004bb9
>NVRM: Xid: 8, Channel 00000000
>NVRM: Xid: 16, Head 00000000 Count 00004bba
>NVRM: Xid: 16, Head 00000000 Count 00004bbb
>NVRM: Xid: 16, Head 00000000 Count 00004bbc
>NVRM: Xid: 16, Head 00000000 Count 00004bbd
>NVRM: Xid: 16, Head 00000000 Count 00004bbe
>NVRM: Xid: 16, Head 00000000 Count 00004bbf
>NVRM: Xid: 16, Head 00000000 Count 00004bc0
>NVRM: Xid: 16, Head 00000000 Count 00004bc1
>NVRM: Xid: 16, Head 00000000 Count 00004bc2

Actions: View

Attachments on bug 141241: 61894 | 61918 | 61919