Attachment 61941 Details for Bug 141375

dmesg output after bootup

dmesg.txt (text/plain), 12.80 KB, created by Rihards Olups on 2006-01-04 10:54:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rihards Olups

Created: 2006-01-04 10:54:38 UTC

Size: 12.80 KB

patch

obsolete

>Bootdata ok (command line is root=/dev/sda2 vga=0x317 selinux=0    resume=/dev/sda1  splash=silent noapic)
>Linux version 2.6.15-rc5-git3-2-default (geeko@buildhost) (gcc version 4.1.0 20051129 (prerelease) (SUSE Linux)) #1 Wed Dec 14 13:10:38 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
> BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000f9d10
>ACPI: RSDT (v001 A M I  OEMRSDT  0x10000522 MSFT 0x00000097) @ 0x000000003ffb0000
>ACPI: FADT (v002 A M I  OEMFACP  0x10000522 MSFT 0x00000097) @ 0x000000003ffb0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x10000522 MSFT 0x00000097) @ 0x000000003ffb0390
>ACPI: MCFG (v001 A M I  OEMMCFG  0x10000522 MSFT 0x00000097) @ 0x000000003ffb03f0
>ACPI: OEMB (v001 A M I  AMI_OEM  0x10000522 MSFT 0x00000097) @ 0x000000003ffc0040
>ACPI: DSDT (v001  93956 93956130 0x00000130 INTL 0x02002026) @ 0x0000000000000000
>On node 0 totalpages: 257484
>  DMA zone: 3042 pages, LIFO batch:0
>  DMA32 zone: 254442 pages, LIFO batch:31
>  Normal zone: 0 pages, LIFO batch:0
>  HighMem zone: 0 pages, LIFO batch:0
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: Skipping IOAPIC probe due to 'noapic' option.
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: TEMPLATE <6>Product ID: ETEMPLATE    <6>APIC at: 0xFEE00000
>I/O APIC #1 Version 20 at 0xFEC00000.
>Setting APIC routing to flat
>Processors: 1
>Allocating PCI resources starting at 50000000 (gap: 40000000:bffc0000)
>Checking aperture...
>CPU 0: aperture @ c120000000 size 32 MB
>Aperture from northbridge cpu 0 too small (32 MB)
>No AGP bridge found
>Built 1 zonelists
>Kernel command line: root=/dev/sda2 vga=0x317 selinux=0    resume=/dev/sda1  splash=silent noapic
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 2000.099 MHz processor.
>time.c: Using PIT/TSC based timekeeping.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Memory: 1024364k/1048256k available (2037k kernel code, 22928k reserved, 765k data, 180k init)
>Calibrating delay using timer specific routine.. 4004.53 BogoMIPS (lpj=8009063)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>mtrr: v2.0 (20020519)
>CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 02
>checking if image is initramfs... it is
>    ACPI-0311: *** Error: ns_search_and_enter: Bad character in ACPI Name: 43035350
>    ACPI-0292: *** Error: Looking up [0x43035350] (NON-ASCII)
> in namespace, AE_BAD_CHARACTER
>    ACPI-0115: *** Error: acpi_load_tables: Could not load namespace: AE_BAD_CHARACTER
>    ACPI-0123: *** Error: acpi_load_tables: Could not load tables: AE_BAD_CHARACTER
>ACPI: Unable to load the System Description Tables
>Using local APIC timer interrupts.
>Detected 12.500 MHz APIC timer.
>testing NMI watchdog ... OK.
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>ACPI: Subsystem revision 20050902
>ACPI: Interpreter disabled.
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
>Boot video device is 0000:01:00.0
>PCI: Using IRQ router default [1039/0965] at 0000:00:02.0
>PCI: IRQ 0 for device 0000:00:02.5 doesn't match PIRQ mask - try pci=usepirqmask
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: faa00000-feafffff
>  PREFETCH window: 9ff00000-dfefffff
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1136314207.492:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>pcie_portdrv_probe->Dev[0004:1039] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie01]
>Allocate Port Service[pcie03]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie01]
>Allocate Port Service[pcie03]
>vesafb: framebuffer at 0xa0000000, mapped to 0xffffc20010100000, using 6144k, total 131072k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>vesafb: Mode is not VGA compatible
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Freeing unused kernel memory: 180k freed
>input: AT Translated Set 2 keyboard as /class/input/input1
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>SIS5513: IDE controller at PCI slot 0000:00:02.5
>PCI: IRQ 0 for device 0000:00:02.5 doesn't match PIRQ mask - try pci=usepirqmask
>SIS5513: chipset revision 1
>SIS5513: not 100% native mode: will probe irqs later
>SIS5513: SiS965 ATA 133 (2nd gen) controller
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: HL-DT-ST GCE-8527B, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>libata version 1.20 loaded.
>sata_sis 0000:00:05.0: version 0.5
>sata_sis 0000:00:05.0: Detected SiS 182 chipset
>ata1: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xD880 irq 5
>ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 5
>ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
>ata1: dev 0 ATA-7, max UDMA/133, 586072368 sectors: LBA48
>ata1: dev 0 configured for UDMA/133
>scsi0 : sata_sis
>ata2: no device found (phy stat 00000001)
>scsi1 : sata_sis
>  Vendor: ATA       Model: ST3300831AS       Rev: 3.03
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>Attempting manual resume
>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>ReiserFS: sda2: using ordered data mode
>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda2: checking transaction log (sda2)
>ReiserFS: sda2: Using r5 hash to sort names
>bootsplash: status on console 0 changed to on
>Adding 1052216k swap on /dev/sda1.  Priority:-1 extents:1 across:1052216k
>spurious 8259A interrupt: IRQ7.
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ehci_hcd 0000:00:03.3: EHCI Host Controller
>PCI: cache line size of 64 is not supported by device 0000:00:03.3
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:03.3: irq 5, io mem 0xfebff000
>ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.0: irq 5, io mem 0xfebfc000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:03.1: irq 5, io mem 0xfebfd000
>hda: ATAPI 52X CD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Floppy drive(s): fd0 is 1.44M
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>Losing some ticks... checking if CPU frequency changed.
>FDC 0 is a post-1991 82077
>create_floppy_d[1175]: segfault at fffffffd5730c0c0 rip 00000000004009da rsp 00007fffff97b1c0 error 4
>ohci_hcd 0000:00:03.2: OHCI Host Controller
>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:03.2: irq 3, io mem 0xfebfe000
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>intel8x0_measure_ac97_clock: measured 54754 usecs
>intel8x0: clocking to 48000
>sis190 Gigabit Ethernet driver 1.2 loaded.
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>0000:00:04.0: Read MAC address from APC.
>0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1.
>usb 4-1: new low speed USB device using ohci_hcd and address 2
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>usbcore: registered new driver hiddev
>input: Darfon USB Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Darfon USB Optical Mouse] on usb-0000:00:03.2-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>ts: Compaq touchscreen protocol output
>0000:00:04.0: Using transceiver at address 1 as default.
>0000:00:04.0: SiS 190 PCI Fast Ethernet adapter at ffffc2000002ac00 (IRQ: 5), 00:13:8f:5a:b8:8b
>eth0: GMII mode.
>eth0: Enabling Auto-negotiation.
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module  1.0-8178  Wed Dec 14 16:58:07 PST 2005
>ReiserFS: sda3: found reiserfs format "3.6" with standard journal
>ReiserFS: sda3: using ordered data mode
>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda3: checking transaction log (sda3)
>ReiserFS: sda3: Using r5 hash to sort names
>create_floppy_d[1661]: segfault at fffffffd5730c0c0 rip 00000000004009da rsp 00007fffffd30850 error 4
>bootsplash: status on console 0 changed to on
>bootsplash: status on console 0 changed to on
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff80384ba0(lo)
>IPv6 over IPv4 tunneling driver
>bootsplash: status on console 0 changed to on
>bootsplash: status on console 0 changed to on

Actions: View

Attachments on bug 141375: 61941 | 62525 | 62639