Bugzilla – Attachment 62041 Details for
Bug 112896
Kernel hardfreeze on double AMD 64
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
dmesg SuSE 10.0
dmesg.txt (text/plain), 17.13 KB, created by
Uwe Köhler
on 2006-01-05 13:26:27 UTC
(
hide
)
Description:
dmesg SuSE 10.0
Filename:
MIME Type:
Creator:
Uwe Köhler
Created:
2006-01-05 13:26:27 UTC
Size:
17.13 KB
patch
obsolete
>Bootdata ok (command line is root=/dev/sdb3 vga=0x317 selinux=0 resume=/dev/sdb1 splash=silent) >Linux version 2.6.13-15-smp (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 SMP Tue Sep 13 14:56:15 UTC 2005 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) > BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data) > BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) > BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) >ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f6cf0 >ACPI: RSDT (v001 A M I OEMRSDT 0x06000514 MSFT 0x00000097) @ 0x000000007fff0000 >ACPI: FADT (v001 A M I OEMFACP 0x06000514 MSFT 0x00000097) @ 0x000000007fff0200 >ACPI: MADT (v001 A M I OEMAPIC 0x06000514 MSFT 0x00000097) @ 0x000000007fff0380 >ACPI: OEMB (v001 A M I OEMBIOS 0x06000514 MSFT 0x00000097) @ 0x000000007ffff040 >ACPI: ASF! (v001 AMIASF AMDSTRET 0x00000001 INTL 0x02002026) @ 0x000000007fff3990 >ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @ 0x0000000000000000 >Scanning NUMA topology in Northbridge 24 >Number of nodes 2 >Node 0 MemBase 0000000000000000 Limit 000000007fff0000 >Skipping disabled node 1 >Using 24 for the hash shift. Max adder is 7fff0000 >Using node hash shift of 24 >Bootmem setup node 0 0000000000000000-000000007fff0000 >On node 0 totalpages: 524175 > DMA zone: 3999 pages, LIFO batch:1 > Normal zone: 520176 pages, LIFO batch:31 > HighMem zone: 0 pages, LIFO batch:1 >ACPI: PM-Timer IO Port: 0x1008 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >Processor #0 15:5 APIC version 16 >ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >Processor #1 15:5 APIC version 16 >ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) >ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) >ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >ACPI: IRQ9 used by override. >Setting APIC routing to flat >Using ACPI (MADT) for SMP configuration information >Allocating PCI resources starting at 80000000 (gap: 80000000:7f780000) >Checking aperture... >CPU 0: aperture @ f0000000 size 128 MB >CPU 1: aperture @ f0000000 size 128 MB >Built 1 zonelists >Kernel command line: root=/dev/sdb3 vga=0x317 selinux=0 resume=/dev/sdb1 splash=silent >bootsplash: silent mode. >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 131072 bytes) >time.c: Using 3.579545 MHz PM timer. >time.c: Detected 2190.908 MHz processor. >Console: colour dummy device 80x25 >Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) >Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) >Memory: 2050572k/2097088k available (2432k kernel code, 0k reserved, 942k data, 212k init) >Calibrating delay using timer specific routine.. 4390.46 BogoMIPS (lpj=8780931) >Security Framework v1.0.0 initialized >SELinux: Disabled at boot. >Mount-cache hash table entries: 256 >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 1024K (64 bytes/line) >CPU 0(1) -> Node 0 -> Core 0 >mtrr: v2.0 (20020519) >checking if image is initramfs... it is >ACPI: Looking for DSDT in initrd... not found! > not found! >Using local APIC timer interrupts. >Detected 12.448 MHz APIC timer. >Booting processor 1/2 APIC 0x1 >Initializing CPU#1 >Calibrating delay using timer specific routine.. 4381.98 BogoMIPS (lpj=8763974) >CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >CPU: L2 Cache: 1024K (64 bytes/line) >CPU 1(1) -> Node 0 -> Core 0 >AMD Opteron(tm) Processor 248 stepping 0a >CPU 1: Syncing TSC to CPU 0. >CPU 1: synchronized TSC with CPU 0 (last diff -163 cycles, maxerr 894 cycles) >Brought up 2 CPUs >Disabling vsyscall due to use of PM timer >time.c: Using PM based timekeeping. >testing NMI watchdog ... OK. >NET: Registered protocol family 16 >ACPI: bus type pci registered >PCI: Using configuration type 1 >ACPI: Subsystem revision 20050408 >ACPI: Interpreter enabled >ACPI: Using IOAPIC for interrupt routing >ACPI: PCI Root Bridge [PCI0] (0000:00) >PCI: Probing PCI hardware (bus 00) >ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 >Boot video device is 0000:01:00.0 >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] >ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) >ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) >PCI: Using ACPI for IRQ routing >PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report >TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) >agpgart: Detected AMD 8151 AGP Bridge rev B3 >agpgart: AGP aperture is 128M @ 0xf0000000 >PCI-DMA: Disabling IOMMU. >PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: fa800000-fe8fffff > PREFETCH window: ca700000-ea6fffff >PCI: Bridge: 0000:00:06.0 > IO window: a000-bfff > MEM window: fe900000-feafffff > PREFETCH window: disabled. >IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ >audit: initializing netlink socket (disabled) >audit(1136469542.432:1): initialized >Total HugeTLB memory allocated, 0 >VFS: Disk quotas dquot_6.5.1 >Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >Initializing Cryptographic API >vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000100000, using 6144k, total 262144k >vesafb: mode is 1024x768x16, linelength=2048, pages=1 >vesafb: scrolling: redraw >vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3). >Console: switching to colour frame buffer device 127x44 >fb0: VESA VGA frame buffer device >Real Time Clock Driver v1.12 >hpet_acpi_add: no address or irqs in _CRS >Non-volatile memory driver v1.2 >Linux agpgart interface v0.101 (c) Dave Jones >serio: i8042 AUX port at 0x60,0x64 irq 12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled >ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A >io scheduler noop registered >io scheduler anticipatory registered >io scheduler deadline registered >io scheduler cfq registered >RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize >loop: loaded (max 8 devices) >mice: PS/2 mouse device common for all mice >input: PC Speaker >md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 >md: bitmap version 3.38 >NET: Registered protocol family 2 >input: AT Translated Set 2 keyboard on isa0060/serio0 >IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) >TCP established hash table entries: 262144 (order: 10, 4194304 bytes) >TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >TCP: Hash tables configured (established 262144 bind 65536) >TCP reno registered >NET: Registered protocol family 1 >ACPI wakeup devices: >PCI1 USB0 USB1 PS2K PS2M UAR1 UAR2 SMBC AC97 MODM PWRB >ACPI: (supports S0 S1 S5) >Freeing unused kernel memory: 212k freed >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >SCSI subsystem initialized >input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 >AMD8111: IDE controller at PCI slot 0000:00:07.1 >AMD8111: chipset revision 3 >AMD8111: not 100% native mode: will probe irqs later >AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio >Probing IDE interface ide0... >hda: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >Probing IDE interface ide1... >libata version 1.12 loaded. >sata_sil version 0.9 >ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 19 (level, low) -> IRQ 169 >ata1: SATA max UDMA/100 cmd 0xFFFFC20000006C80 ctl 0xFFFFC20000006C8A bmdma 0xFFFFC20000006C00 irq 169 >ata2: SATA max UDMA/100 cmd 0xFFFFC20000006CC0 ctl 0xFFFFC20000006CCA bmdma 0xFFFFC20000006C08 irq 169 >ata3: SATA max UDMA/100 cmd 0xFFFFC20000006E80 ctl 0xFFFFC20000006E8A bmdma 0xFFFFC20000006E00 irq 169 >ata4: SATA max UDMA/100 cmd 0xFFFFC20000006EC0 ctl 0xFFFFC20000006ECA bmdma 0xFFFFC20000006E08 irq 169 >ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7468 86:3c01 87:4023 88:20ff >ata1: dev 0 ATA, max UDMA7, 312581808 sectors: lba48 >ata1: dev 0 configured for UDMA/100 >scsi0 : sata_sil >ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7468 86:3c01 87:4023 88:20ff >ata2: dev 0 ATA, max UDMA7, 312581808 sectors: lba48 >ata2: dev 0 configured for UDMA/100 >scsi1 : sata_sil >ata3: no device found (phy stat 00000000) >scsi2 : sata_sil >ata4: no device found (phy stat 00000000) >scsi3 : sata_sil > Vendor: ATA Model: SAMSUNG HD160JJ Rev: WU10 > Type: Direct-Access ANSI SCSI revision: 05 >SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) >SCSI device sda: drive cache: write back >SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) >SCSI device sda: drive cache: write back > sda: sda1 sda2 >Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > Vendor: ATA Model: SAMSUNG HD160JJ Rev: WU10 > Type: Direct-Access ANSI SCSI revision: 05 >SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) >SCSI device sdb: drive cache: write back >Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 >SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) >SCSI device sdb: drive cache: write back > sdb: sdb1 sdb2 sdb3 sdb4 >Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 >Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 >ACPI: CPU0 (power states: C1[C1]) >ACPI: Processor [CPU1] (supports 8 throttling states) >ACPI: CPU1 (power states: C1[C1]) > ACPI-0733: *** Warning: Processor Device is not present > ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x3 > ACPI-0733: *** Warning: Processor Device is not present > ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x4 >ReiserFS: sdb3: found reiserfs format "3.6" with standard journal >ReiserFS: sdb3: using ordered data mode >ReiserFS: sdb3: journal params: device sdb3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >ReiserFS: sdb3: checking transaction log (sdb3) >ReiserFS: sdb3: Using r5 hash to sort names >md: Autodetecting RAID arrays. >md: autorun ... >md: ... autorun DONE. >Adding 6297440k swap on /dev/sdb1. Priority:-1 extents:1 >bootsplash: status on console 0 changed to on >device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com >ReiserFS: sda1: found reiserfs format "3.6" with standard journal >ReiserFS: sda1: using ordered data mode >ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >ReiserFS: sda1: checking transaction log (sda1) >ReiserFS: sda1: Using r5 hash to sort names >NET: Registered protocol family 10 >Disabled Privacy Extensions on device ffffffff803f99e0(lo) >IPv6 over IPv4 tunneling driver >ip6_tables: (C) 2000-2002 Netfilter core team >ip_tables: (C) 2000-2002 Netfilter core team >ip_conntrack version 2.1 (8192 buckets, 65536 max) - 304 bytes per conntrack >lp: driver loaded but no devices found >bootsplash: status on console 0 changed to on >pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >shpchp: HPC vendor_id 1022 device_id 7455 ss_vid 0 ss_did 0 >shpchp: shpc_init: cannot reserve MMIO region >shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0 >shpchp: shpc_init: cannot reserve MMIO region >shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 >hw_random: AMD768 system management I/O registers at 0x1000. >hw_random hardware driver 1.0.0 loaded >usbcore: registered new driver usbfs >usbcore: registered new driver hub >USB Universal Host Controller Interface driver v2.3 >ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 17 (level, low) -> IRQ 177 >PCI: Via IRQ fixup for 0000:02:0b.0, from 9 to 1 >uhci_hcd 0000:02:0b.0: UHCI Host Controller >uhci_hcd 0000:02:0b.0: new USB bus registered, assigned bus number 1 >uhci_hcd 0000:02:0b.0: irq 177, io base 0x0000b000 >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 2 ports detected >ACPI: PCI Interrupt 0000:02:0b.1[B] -> GSI 18 (level, low) -> IRQ 185 >PCI: Via IRQ fixup for 0000:02:0b.1, from 5 to 9 >uhci_hcd 0000:02:0b.1: UHCI Host Controller >uhci_hcd 0000:02:0b.1: new USB bus registered, assigned bus number 2 >uhci_hcd 0000:02:0b.1: irq 185, io base 0x0000b080 >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 2 ports detected >ieee1394: Initialized config rom entry `ip1394' >ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org> >ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 17 (level, low) -> IRQ 177 >PCI: Via IRQ fixup for 0000:02:0a.0, from 9 to 1 >ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177] MMIO=[feaff000-feaff7ff] Max Packet=[2048] >ACPI: PCI Interrupt 0000:02:0b.2[C] -> GSI 19 (level, low) -> IRQ 169 >PCI: Via IRQ fixup for 0000:02:0b.2, from 10 to 9 >ehci_hcd 0000:02:0b.2: EHCI Host Controller >ehci_hcd 0000:02:0b.2: new USB bus registered, assigned bus number 3 >ehci_hcd 0000:02:0b.2: irq 169, io mem 0xfeaff800 >ehci_hcd 0000:02:0b.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 4 ports detected >ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) >ACPI: PCI Interrupt 0000:02:00.0[D] -> GSI 19 (level, low) -> IRQ 169 >ohci_hcd 0000:02:00.0: OHCI Host Controller >Intel(R) PRO/1000 Network Driver - version 6.0.60-k2-NAPI >Copyright (c) 1999-2005 Intel Corporation. >ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4 >ohci_hcd 0000:02:00.0: irq 169, io mem 0xfeafd000 >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 3 ports detected >ACPI: PCI Interrupt 0000:02:00.1[D] -> GSI 19 (level, low) -> IRQ 169 >ohci_hcd 0000:02:00.1: OHCI Host Controller >ohci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 5 >ohci_hcd 0000:02:00.1: irq 169, io mem 0xfeafe000 >hub 5-0:1.0: USB hub found >hub 5-0:1.0: 3 ports detected >ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 18 (level, low) -> IRQ 185 >ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 177 >e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection >intel8x0_measure_ac97_clock: measured 58533 usecs >intel8x0: clocking to 48000 >hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) >Uniform CD-ROM driver Revision: 3.20 >BIOS EDD facility v0.16 2004-Jun-25, 2 devices found >ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0810000307c77] >NET: Registered protocol family 17 >e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex >nvidia: module not supported by Novell, setting U taint flag. >nvidia: module license 'NVIDIA' taints kernel. >ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193 >NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7676 Fri Jul 29 13:15:16 PDT 2005 >agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. >agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode >agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode >agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. >agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode >agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode >bootsplash: status on console 0 changed to on >ACPI: Power Button (FF) [PWRF] >ACPI: Power Button (CM) [PWRB] >IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com> >microcode: CPU0 not a capable Intel processor >microcode: CPU1 not a capable Intel processor >microcode: No new microcode data for CPU0 >microcode: No new microcode data for CPU1 >IA-32 Microcode Update Driver v1.14 unregistered >eth0: no IPv6 routers present >bootsplash: status on console 0 changed to on >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.244 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 >SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:e0:81:30:e6:e7:00:0c:41:0c:b3:bd:08:00 SRC=192.168.0.242 DST=192.168.0.244 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=1394 DF PROTO=TCP SPT=5687 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A004C72E40000000001030302) >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.244 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.0.244 DST=224.0.0.251 LEN=107 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=87 >SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:e0:81:30:e6:e7:00:0c:41:0c:b3:bd:08:00 SRC=192.168.0.242 DST=192.168.0.244 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=30358 DF PROTO=TCP SPT=2450 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A004D328A0000000001030302) >SFW2-INext-ACC-TCP IN=eth0 OUT= MAC=00:e0:81:30:e6:e7:00:0c:41:0c:b3:bd:08:00 SRC=192.168.0.242 DST=192.168.0.244 LEN=60 TOS=0x00 PREC=0x00 TTL=64 ID=60520 DF PROTO=TCP SPT=2451 DPT=22 WINDOW=5840 RES=0x00 SYN URGP=0 OPT (020405B40402080A004D48170000000001030302)
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 112896
:
47480
|
47481
|
47482
|
47483
|
47745
|
62040
| 62041 |
62042