Attachment 62043 Details for Bug 130725

dmesg after battery insert/remove with test kernel

dmesg-new-kernel.txt (text/plain), 15.79 KB, created by JP Rosevear on 2006-01-05 13:59:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: JP Rosevear

Created: 2006-01-05 13:59:16 UTC

Size: 15.79 KB

patch

obsolete

>Linux version 2.6.15-2-default (geeko@buildhost) (gcc version 4.1.0 20051221 (prerelease) (SUSE Linux)) #1 Wed Jan 4 10:54:43 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff60000 (usable)
> BIOS-e820: 000000007ff60000 - 000000007ff77000 (ACPI data)
> BIOS-e820: 000000007ff77000 - 000000007ff79000 (ACPI NVS)
> BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>On node 0 totalpages: 524128
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 294752 pages, LIFO batch:31
>DMI present.
>ACPI: RSDP (v002 IBM                                   ) @ 0x000f6d70
>ACPI: XSDT (v001 IBM    TP-1R    0x00003170  LTP 0x00000000) @ 0x7ff6a6cd
>ACPI: FADT (v003 IBM    TP-1R    0x00003170 IBM  0x00000001) @ 0x7ff6a800
>ACPI: SSDT (v001 IBM    TP-1R    0x00003170 MSFT 0x0100000e) @ 0x7ff6a9b4
>ACPI: ECDT (v001 IBM    TP-1R    0x00003170 IBM  0x00000001) @ 0x7ff76ebc
>ACPI: TCPA (v001 IBM    TP-1R    0x00003170 PTL  0x00000001) @ 0x7ff76f0e
>ACPI: BOOT (v001 IBM    TP-1R    0x00003170  LTP 0x00000001) @ 0x7ff76fd8
>ACPI: DSDT (v001 IBM    TP-1R    0x00003170 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: local apic disabled
>Allocating PCI resources starting at 88000000 (gap: 80000000:7f800000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda3 vga=0x317 selinux=0    resume=/dev/hda2  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 1998.638 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2072856k/2096512k available (1479k kernel code, 22444k reserved, 611k data, 188k init, 1179008k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4000.27 BogoMIPS (lpj=8000553)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 06
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2524k freed
> not found!
>ACPI: setting ELCR to 0200 (from 0800)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050902
>ACPI: Found ECDT
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>burst-mode-ec-10-Aug
>ACPI: Embedded Controller [EC] (gpe 28)
>ACPI: Power Resource [PUBS] (on)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: 3000-3fff
>  MEM window: c0100000-c01fffff
>  PREFETCH window: e0000000-e7ffffff
>PCI: Bus 3, cardbus bridge: 0000:02:00.0
>  IO window: 00004000-000040ff
>  IO window: 00004400-000044ff
>  PREFETCH window: e8000000-e9ffffff
>  MEM window: c2000000-c3ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:00.1
>  IO window: 00004800-000048ff
>  IO window: 00004c00-00004cff
>  PREFETCH window: ea000000-ebffffff
>  MEM window: c4000000-c5ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-8fff
>  MEM window: c0200000-cfffffff
>  PREFETCH window: e8000000-efffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>Simple Boot Flag at 0x35 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1136469092.420:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total 131008k
>vesafb: mode is 1024x768x16, linelength=2048, pages=84
>vesafb: protected mode interface info at c000:5a0d
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>vesafb: Mode is VGA compatible
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 81348 bytes,<6>...found (1024x768, 32946 bytes, v3).
>Console: switching to colour frame buffer device 93x45
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>pnp: Device 00:09 activated.
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 64 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker as /class/input/input0
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard as /class/input/input1
>IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
>TCP established hash table entries: 524288 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 524288 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
> LID SLPB PCI0 UART PCI1 USB0 USB1 AC9M 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 188k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ICH4: chipset revision 1
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>hda: HTS726060M9AT00, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=65535/16/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>Probing IDE interface ide1...
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (58 C)
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 2104504k swap on /dev/hda2.  Priority:-1 extents:1 across:2104504k
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>lp0: using parport0 (interrupt-driven).
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 855PM Chipset.
>agpgart: AGP aperture is 256M @ 0xd0000000
>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hw_random hardware driver 1.0.0 loaded
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI
>Copyright (c) 1999-2005 Intel Corporation.
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>Yenta: ISA IRQ mask 0x0438, PCI irq 11
>Socket status: 30000086
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
>cs: IO port probe 0x4000-0x8fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
>pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
>ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:00.1, mfunc 0x01d21b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0438, PCI irq 11
>Socket status: 30000086
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
>cs: IO port probe 0x4000-0x8fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
>pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>intel8x0_measure_ac97_clock: measured 56297 usecs
>intel8x0: clocking to 48000
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input3
>ts: Compaq touchscreen protocol output
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x377
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x377
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
>ibm_acpi: http://ibm-acpi.sf.net/
>    ACPI-0073: *** Warning: No context for object [dffe3b40]
>ibm_acpi: dock device not present
>    ACPI-0073: *** Warning: No context for object [dffdf8c0]
>ibm_acpi: bay device not present
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 already at revision 0x18 (current=0x18)
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>NET: Registered protocol family 17
>eth0: no IPv6 routers present
>    ACPI-0073: *** Warning: No context for object [dffe5380]
>    ACPI-0073: *** Warning: No context for object [dffe5380]
>    ACPI-0073: *** Warning: No context for object [dffe5380]
>    ACPI-0073: *** Warning: No context for object [dffe5380]
>    ACPI-0073: *** Warning: No context for object [dffe5380]

Actions: View

Attachments on bug 130725: 55515 | 61913 | 61914 | 61915 | 61916 | 62043