Attachment 62245 Details for Bug 141878

Dmesg info

dmesg info (text/plain), 16.12 KB, created by Marcel S on 2006-01-06 21:38:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Marcel S

Created: 2006-01-06 21:38:54 UTC

Size: 16.12 KB

patch

obsolete

>
>Bootdata ok (command line is root=/dev/sda7 vga=0x317 selinux=0 resume=/dev/sda6 splash=silent PROFILE=default)
>Linux version 2.6.13-15.7-smp (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 SMP Tue Nov 29 14:32:29 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable)
> BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data)
> BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS)
> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x00000000000faa90
>ACPI: XSDT (v001 A M I  OEMXSDT  0x09000507 MSFT 0x00000097) @ 0x000000001ffb0100
>ACPI: FADT (v003 A M I  OEMFACP  0x09000507 MSFT 0x00000097) @ 0x000000001ffb0290
>ACPI: MADT (v001 A M I  OEMAPIC  0x09000507 MSFT 0x00000097) @ 0x000000001ffb0390
>ACPI: OEMB (v001 A M I  OEMBIOS  0x09000507 MSFT 0x00000097) @ 0x000000001ffc0040
>ACPI: DSDT (v001  A0094 A0094038 0x00000038 INTL 0x02002026) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000001ffb0000
>Bootmem setup node 0 0000000000000000-000000001ffb0000
>On node 0 totalpages: 130895
>  DMA zone: 3999 pages, LIFO batch:1
>  Normal zone: 126896 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 20000000:dfb80000)
>Checking aperture...
>Built 1 zonelists
>Kernel command line: root=/dev/sda7 vga=0x317 selinux=0 resume=/dev/sda6 splash=silent PROFILE=default
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 65536 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 3000.270 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Memory: 503672k/523968k available (2433k kernel code, 0k reserved, 942k data, 212k init)
>Calibrating delay using timer specific routine.. 6008.90 BogoMIPS (lpj=12017819)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>mtrr: v2.0 (20020519)
>checking if image is initramfs... it is
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>Using local APIC timer interrupts.
>Detected 12.501 MHz APIC timer.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6000.69 BogoMIPS (lpj=12001398)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU1: Thermal monitoring enabled (TM1)
>              Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
>APIC error on CPU1: 00(40)
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff -120 cycles, maxerr 938 cycles)
>Brought up 2 CPUs
>time.c: Using PIT/TSC based timekeeping.
>testing NMI watchdog ... OK.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fa000000-fbefffff
>  PREFETCH window: f0000000-f8ffffff
>PCI: Bus 3, cardbus bridge: 0000:02:0a.0
>  IO window: 0000e000-0000efff
>  IO window: 00001000-00001fff
>  PREFETCH window: 20000000-21ffffff
>  MEM window: 24000000-25ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-efff
>  MEM window: fbf00000-fbffffff
>  PREFETCH window: 20000000-22ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:02:0a.0 (0140 -> 0143)
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 169
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1136581237.940:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xf0000000, mapped to 0xffffc20000080000, using 6144k, total 131072k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 8192 (order: 4, 65536 bytes)
>TCP established hash table entries: 32768 (order: 7, 524288 bytes)
>TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 32768 bind 32768)
>TCP reno registered
>NET: Registered protocol family 1
>ACPI wakeup devices:
>P0P4 MC97 USB1 USB2 USB3 USB4 EUSB PS2K PS2M ILAN PWRB
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 212k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>input: PS/2 Generic Mouse on isa0060/serio1
>hda: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>libata version 1.12 loaded.
>ata_piix version 1.04
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x9800 ctl 0x9402 bmdma 0x8400 irq 177
>ata2: SATA max UDMA/133 cmd 0x9000 ctl 0x8802 bmdma 0x8408 irq 177
>Losing some ticks... checking if CPU frequency changed.
>ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3c01 87:4003 88:20ff
>ata1: dev 0 ATA, max UDMA7, 156368016 sectors: lba48
>ata1: dev 0 configured for UDMA/133
>scsi0 : ata_piix
>ATA: abnormal status 0x7F on port 0x9007
>scsi1 : ata_piix
>  Vendor: ATA       Model: SAMSUNG SP0812C   Rev: SU10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 156368016 512-byte hdwr sectors (80060 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>ACPI: CPU0 (power states: C1[C1])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: CPU1 (power states: C1[C1])
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>ReiserFS: sda7: found reiserfs format "3.6" with standard journal
>ReiserFS: sda7: using ordered data mode
>ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda7: checking transaction log (sda7)
>ReiserFS: sda7: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 1036152k swap on /dev/sda6.  Priority:42 extents:1
>bootsplash: status on console 0 changed to on
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>NTFS driver 2.1.23 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>NTFS volume version 3.1.
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>SubDomain: SubDomain (version 1.2-13.42r5011imnx_suse) initialized
>SubDomain: Control variable 'owlsm' changed to 0
>intel8x0_measure_ac97_clock: measured 56013 usecs
>intel8x0: clocking to 48000
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device ffffffff803f9e60(lo)
>IPv6 over IPv4 tunneling driver
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
>parport0: irq 7 detected
>ip6_tables: (C) 2000-2002 Netfilter core team
>lp0: using parport0 (polling).
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (2046 buckets, 16368 max) - 304 bytes per conntrack
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000a800
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>shpchp: shpc_init : shpc_cap_offset == 0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000b000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000b400
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 193, io base 0x0000b800
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hw_random hardware driver 1.0.0 loaded
>agpgart: Detected an Intel 865 Chipset.
>agpgart: AGP aperture is 128M @ 0xe8000000
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 209, io mem 0xf9fffc00
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>Floppy drive(s): fd0 is 1.44M
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 169
>sk98lin: Network Device Driver v8.23.1.3
>(C)Copyright 1999-2005 Marvell(R).
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 169
>eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
>      PrefPort:A  RlmtMode:Check Link State
>FDC 0 is a post-1991 82077
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 217
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[217]  MMIO=[fbffb800-fbffbfff]  Max Packet=[2048]
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 169
>Yenta: CardBus bridge found at 0000:02:0a.0 [0000:0000]
>Yenta: ISA IRQ mask 0x0000, PCI irq 169
>Socket status: 30000820
>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
>pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x22ffffff
>hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:03:00.1[A] -> GSI 22 (level, low) -> IRQ 169
>ttyS2 at I/O 0xe000 (irq = 169) is a 16550A
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[070050c50001193d]
>bootsplash: status on console 0 changed to on
>NET: Registered protocol family 17
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
>NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module  1.0-7676  Fri Jul 29 13:15:16 PDT 2005
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>eth0: no IPv6 routers present
>bootsplash: status on console 0 changed to on
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>NET: Registered protocol family 23
>IrCOMM protocol (Dag Brattli)
>bootsplash: status on console 0 changed to on
>subfs 0.9
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>subfs: unsuccessful attempt to mount media (256)
>warning: many lost ticks.
>Your time source seems to be instable or some driver is hogging interupts
>rip mwait_idle+0x60/0x90
>CSLIP: code copyright 1989 Regents of the University of California
>PPP generic driver version 2.4.2
>PPP BSD Compression module registered
>PPP Deflate Compression module registered
>PPP: VJ decompression error
>PPP: VJ decompression error
>PPP: VJ decompression error

Actions: View

Attachments on bug 141878: 62245