Attachment 62456 Details for Bug 141947

Fresh full dmesg output

dmesg.out (text/plain), 18.90 KB, created by Edwards Reed on 2006-01-09 18:07:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Edwards Reed

Created: 2006-01-09 18:07:22 UTC

Size: 18.90 KB

patch

obsolete

>Linux version 2.6.13-15.7-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Nov 29 14:32:29 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fe90000 (usable)
> BIOS-e820: 000000001fe90000 - 000000001fe9d000 (ACPI data)
> BIOS-e820: 000000001fe9d000 - 000000001ff00000 (ACPI NVS)
> BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>510MB LOWMEM available.
>On node 0 totalpages: 130704
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126608 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6780
>ACPI: RSDT (v001   Sony       V0 0x20051108 PTL  0x00000000) @ 0x1fe97449
>ACPI: FADT (v002   Sony       V0 0x20051108 PTL  0x00000050) @ 0x1fe9ce78
>ACPI: MADT (v001   Sony       V0 0x20051108 PTL  0x00000050) @ 0x1fe9cefc
>ACPI: BOOT (v001   Sony       V0 0x20051108 PTL  0x00000001) @ 0x1fe9cfd8
>ACPI: MCFG (v001   Sony       V0 0x20051108 PTL  0x0000005f) @ 0x1fe9cf9c
>ACPI: SSDT (v001   Sony       V0 0x20051108 PTL  0x20030224) @ 0x1fe983aa
>ACPI: SSDT (v001   Sony       V0 0x20051108 PTL  0x20030224) @ 0x1fe97d0e
>ACPI: SSDT (v001   Sony       V0 0x20051108 PTL  0x20030224) @ 0x1fe978c9
>ACPI: SSDT (v001   Sony       V0 0x20051108 PTL  0x20030224) @ 0x1fe976aa
>ACPI: SSDT (v001   Sony       V0 0x20051108 PTL  0x20030224) @ 0x1fe97491
>ACPI: DSDT (v001   Sony       V0 0x20051108 PTL  0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: local apic disabled
>Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000)
>Built 1 zonelists
>Kernel command line: root=/dev/sda6 vga=0x317 selinux=0 resume=/dev/sda5  splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1862.458 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 512600k/522816k available (2029k kernel code, 9620k reserved, 695k data, 204k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3729.63 BogoMIPS (lpj=7459276)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1753k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0420)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd911, last bus=7
>PCI: Using MMCONFIG
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *3
>ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>ACPI: Embedded Controller [EC0] (gpe 23)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: 90000000-afffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bus 7, cardbus bridge: 0000:06:05.0
>  IO window: 00003000-00003fff
>  IO window: 00004000-00004fff
>  PREFETCH window: 20000000-21ffffff
>  MEM window: 22000000-23ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-2fff
>  MEM window: b0000000-b00fffff
>  PREFETCH window: 20000000-21ffffff
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:06:05.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1136811447.996:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>vesafb: framebuffer at 0xc0000000, mapped to 0xe0880000, using 6144k, total 32768k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:d3c0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3).
>Console: switching to colour frame buffer device 127x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>PWRB USB1 USB2 USB3 USB4 USB7 LANC  EC0 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SCSI subsystem initialized
>ICH6: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1f.1[B] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>ICH6: chipset revision 3
>ICH6: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>input: PS/2 Mouse on isa0060/serio1
>input: AlpsPS/2 ALPS GlidePoint on isa0060/serio1
>hda: MATSHITAUJ-832D, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>libata version 1.12 loaded.
>ahci version 1.01
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl IDE mode
>ahci(0000:00:1f.2) flags: 64bit ncq pm led pmp slum part 
>ata1: SATA max UDMA/133 cmd 0xE0836500 ctl 0x0 bmdma 0x0 irq 10
>ata2: SATA max UDMA/133 cmd 0xE0836580 ctl 0x0 bmdma 0x0 irq 10
>ata3: SATA max UDMA/133 cmd 0xE0836600 ctl 0x0 bmdma 0x0 irq 10
>ata4: SATA max UDMA/133 cmd 0xE0836680 ctl 0x0 bmdma 0x0 irq 10
>ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:bf09 87:6063 88:203f
>ata1: dev 0 ATA, max UDMA/100, 195371568 sectors: lba48
>ata1: dev 0 configured for UDMA/100
>scsi0 : ahci
>ata2: no device found (phy stat 00000000)
>scsi1 : ahci
>ata3: no device found (phy stat 00000000)
>scsi2 : ahci
>ata4: no device found (phy stat 00000000)
>scsi3 : ahci
>  Vendor: ATA       Model: FUJITSU MHV2100B  Rev: 0000
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 < sda5 sda6 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>    ACPI-0521: *** Warning: Error getting cpuindex for acpiid 0x1
>ACPI: Thermal Zone [ATF0] (53 C)
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: sda6: found reiserfs format "3.6" with standard journal
>ReiserFS: sda6: using ordered data mode
>ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda6: checking transaction log (sda6)
>ReiserFS: sda6: Using r5 hash to sort names
>bootsplash: status on console 0 changed to on
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>NTFS driver 2.1.23 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>lp: driver loaded but no devices found
>Adding 1028152k swap on /dev/sda5.  Priority:-1 extents:1
>SubDomain: SubDomain (version 1.2-13.42r5011imnx_suse) initialized
>SubDomain: Control variable 'owlsm' changed to 0
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001820
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ip6_tables: (C) 2000-2002 Netfilter core team
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 10, io base 0x00001860
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>hw_random hardware driver 1.0.0 loaded
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0x80004000
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>ip_tables: (C) 2000-2002 Netfilter core team
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA sound/pci/hda/patch_realtek.c:2506: hda_codec: Unknown model for ALC260
>usb 1-1: new low speed USB device using uhci_hcd and address 3
>ip_conntrack version 2.1 (4084 buckets, 32672 max) - 248 bytes per conntrack
>ACPI: PCI Interrupt 0000:06:05.0[A] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:06:05.0 [104d:818f]
>e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
>e100: Copyright(c) 1999-2005 Intel Corporation
>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'NULL'
>Yenta: ISA IRQ mask 0x08f8, PCI irq 10
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>cs: IO port probe 0x2000-0x2fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb00fffff
>pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x21ffffff
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:06:08.0[A] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>e100: eth0: e100_probe: addr 0xb0006000, irq 10, MAC addr 00:01:4A:9F:CF:FE
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:06:05.2[C] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[b0004000-b00047ff]  Max Packet=[2048]
>ieee80211: module not supported by Novell, setting U taint flag.
>ieee80211: 802.11 data/management/control stack, 1.0.3
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: module not supported by Novell, setting U taint flag.
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.6
>ipw2200: Copyright(c) 2003-2004 Intel Corporation
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:06:0b.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
>ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0800460300f018e2]
>usbcore: registered new driver hiddev
>input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>bootsplash: status on console 0 changed to on
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>NET: Registered protocol family 17
>Linux agpgart interface v0.101 (c) Dave Jones
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>    ACPI-0212: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7676  Fri Jul 29 12:58:54 PDT 2005
>spurious 8259A interrupt: IRQ7.
>eth0: no IPv6 routers present
>Sony Vaio Jogdial input method installed.
>Sony Vaio Keys input method installed.
>sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 594)
>sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 605)
>sonypi command failed at drivers/char/sonypi.c : sonypi_call2 (line 607)
>sonypi command failed at drivers/char/sonypi.c : sonypi_call1 (line 594)
>sonypi: Sony Programmable I/O Controller Driverv1.26.
>sonypi: detected type2 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
>sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
>eth1: no IPv6 routers present
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Lid Switch [LID0]
>ACPI: Power Button (CM) [PWRB]
>ACPI Sony Notebook Control Driver v0.2 successfully installed
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: No new microcode data for CPU0
>IA-32 Microcode Update Driver v1.14 unregistered
>bootsplash: status on console 0 changed to on
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.72 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=6 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.72 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.72 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88 
>SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=192.168.2.72 DST=224.0.0.251 LEN=108 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=88

Actions: View

Attachments on bug 141947: 62456