Attachment 64005 Details for Bug 143408

Yet, yet another OOPS with my Samsung phone ()swsusp related).

dmesg-samsung3.txt (text/plain), 27.78 KB, created by Wolfgang Glas on 2006-01-19 13:45:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Wolfgang Glas

Created: 2006-01-19 13:45:53 UTC

Size: 27.78 KB

patch

obsolete

>Linux version 2.6.13-15.7-default (geeko@buildhost) (gcc version 4.0.2 20050901 (prerelease) (SUSE Linux)) #1 Tue Nov 29 14:32:29 UTC 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffe2800 (usable)
> BIOS-e820: 000000003ffe2800 - 0000000040000000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>On node 0 totalpages: 262114
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32738 pages, LIFO batch:15
>DMI 2.3 present.
>ACPI: RSDP (v000 DELL                                  ) @ 0x000fde50
>ACPI: RSDT (v001 DELL    CPi R   0x27d30117 ASL  0x00000061) @ 0x000fde64
>ACPI: FADT (v001 DELL    CPi R   0x27d30117 ASL  0x00000061) @ 0x000fde90
>ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: local apic disabled
>Allocating PCI resources starting at 40000000 (gap: 40000000:beda0000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda2 vga=0x317 selinux=0 resume=/dev/hda1 splash=silent  showopts
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 1994.471 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1033492k/1048456k available (2029k kernel code, 14056k reserved, 695k data, 204k init, 130952k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3992.81 BogoMIPS (lpj=7985629)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000
>CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00000400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>mtrr: v2.0 (20020519)
>CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz stepping 07
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 1661k freed
>ACPI: Looking for DSDT in initrd... not found!
> not found!
>ACPI: setting ELCR to 0200 (from 0800)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050408
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: Power Resource [PADA] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 16 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:01: ioport range 0x800-0x805 could not be reserved
>pnp: 00:01: ioport range 0x808-0x80f could not be reserved
>pnp: 00:02: ioport range 0x806-0x807 has been reserved
>pnp: 00:02: ioport range 0x810-0x85f could not be reserved
>pnp: 00:02: ioport range 0x860-0x87f has been reserved
>pnp: 00:02: ioport range 0x880-0x8bf has been reserved
>pnp: 00:02: ioport range 0x8c0-0x8df has been reserved
>pnp: 00:02: ioport range 0x8e0-0x8ff has been reserved
>pnp: 00:03: ioport range 0xf000-0xf0fe has been reserved
>pnp: 00:03: ioport range 0xf100-0xf1fe has been reserved
>pnp: 00:03: ioport range 0xf200-0xf2fe has been reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0xf500-0xf5fe has been reserved
>pnp: 00:03: ioport range 0xf600-0xf6fe has been reserved
>pnp: 00:03: ioport range 0xf800-0xf8fe has been reserved
>pnp: 00:03: ioport range 0xf900-0xf9fe has been reserved
>pnp: 00:08: ioport range 0x900-0x91f has been reserved
>pnp: 00:08: ioport range 0x3f0-0x3f1 has been reserved
>pnp: 00:0e: ioport range 0xbf40-0xbf5f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fc000000-fdffffff
>  PREFETCH window: d8000000-e7ffffff
>PCI: Bus 3, cardbus bridge: 0000:02:01.0
>  IO window: 00001000-00001fff
>  IO window: 00002000-00002fff
>  PREFETCH window: 40000000-41ffffff
>  MEM window: f4000000-f5ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:01.1
>  IO window: 00003000-00003fff
>  IO window: 00004000-00004fff
>  PREFETCH window: 42000000-43ffffff
>  MEM window: f6000000-f7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-ffff
>  MEM window: f4000000-fbffffff
>  PREFETCH window: 40000000-44ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>    ACPI-0212: *** Warning: Device is not power manageable
>PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>    ACPI-0212: *** Warning: Device is not power manageable
>PCI: Enabling device 0000:02:01.1 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1137675645.836:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 6144k, total 65536k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:f120
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>loop: loaded (max 8 devices)
>mice: PS/2 mouse device common for all mice
>input: PC Speaker
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard on isa0060/serio0
>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
> LID PBTN PCI0 UAR1 USB0 USB1 USB2 MODM PCIE MPCI 
>ACPI: (supports S0 S1 S3 S4 S4bios S5)
>Freeing unused kernel memory: 204k freed
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH3M: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ICH3M: chipset revision 2
>ICH3M: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: TOSHIBA MK8026GAX, ATA DISK drive
>hdb: TOSHIBA DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>Probing IDE interface ide1...
>input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THM] (33 C)
>Attempting manual resume
>swsusp: Suspend partition has wrong signature?
>ReiserFS: hda2: found reiserfs format "3.6" with standard journal
>ReiserFS: hda2: using ordered data mode
>ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda2: checking transaction log (hda2)
>ReiserFS: hda2: Using r5 hash to sort names
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 2000336k swap on /dev/hda1.  Priority:42 extents:1
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-4: using ordered data mode
>ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-4: checking transaction log (dm-4)
>ReiserFS: dm-4: Using r5 hash to sort names
>ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-1: using ordered data mode
>ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-1: checking transaction log (dm-1)
>ReiserFS: dm-1: Using r5 hash to sort names
>ReiserFS: dm-5: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-5: using ordered data mode
>ReiserFS: dm-5: journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-5: checking transaction log (dm-5)
>ReiserFS: dm-5: Using r5 hash to sort names
>ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-0: using ordered data mode
>ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-0: checking transaction log (dm-0)
>ReiserFS: dm-0: Using r5 hash to sort names
>ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-2: using ordered data mode
>ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-2: checking transaction log (dm-2)
>ReiserFS: dm-2: Using r5 hash to sort names
>ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-3: using ordered data mode
>ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-3: checking transaction log (dm-3)
>ReiserFS: dm-3: Using r5 hash to sort names
>ReiserFS: dm-6: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-6: using ordered data mode
>ReiserFS: dm-6: journal params: device dm-6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-6: checking transaction log (dm-6)
>ReiserFS: dm-6: Using r5 hash to sort names
>ReiserFS: dm-7: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-7: using ordered data mode
>ReiserFS: dm-7: journal params: device dm-7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-7: checking transaction log (dm-7)
>ReiserFS: dm-7: Using r5 hash to sort names
>    ACPI-0077: *** Warning: No context for object [dffe97c0]
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:02:00.0: 3Com PCI 3c905C Tornado at 0xec80. Vers LK1.1.19
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
>hw_random: RNG not detected
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
>shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel i845 Chipset.
>agpgart: AGP aperture is 64M @ 0xe8000000
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ieee1394: Initialized config rom entry `ip1394'
>intel8x0_measure_ac97_clock: measured 55390 usecs
>intel8x0: clocking to 48000
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[f8fff000-f8fff7ff]  Max Packet=[2048]
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:02:01.0 [1028:00d5]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:01.0, mfunc 0x05033002, devctl 0x64
>Yenta: ISA IRQ mask 0x0418, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
>cs: IO port probe 0xe000-0xffff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x44ffffff
>ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:02:01.1 [1028:00d5]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:01.1, mfunc 0x05033002, devctl 0x64
>Yenta: ISA IRQ mask 0x0418, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
>cs: IO port probe 0xe000-0xffff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x44ffffff
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[354fc0003dc2d010]
>hdb: ATAPI 24X DVD-ROM drive, 192kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x37f
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x37f
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 17
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery absent)
>ACPI: Battery Slot [BAT1] (battery absent)
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PBTN]
>ACPI: Sleep Button (CM) [SBTN]
>vmmon: module not supported by Novell, setting U taint flag.
>vmmon: module license 'unspecified' taints kernel.
>/dev/vmmon[5407]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[5407]: Module vmmon: initialized
>vmnet: module not supported by Novell, setting U taint flag.
>/dev/vmnet: open called by PID 5495 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 5517 (vmnet-natd)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c036b920(lo)
>IPv6 over IPv4 tunneling driver
>/dev/vmnet: open called by PID 5999 (vmnet-netifup)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 6163 (vmnet-dhcpd)
>/dev/vmnet: port on hub 8 successfully opened
>eth0: no IPv6 routers present
>vmnet8: no IPv6 routers present
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>cdc_acm 2-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usb 2-1: USB disconnect, address 2
>usbcore: deregistering driver cdc_acm
>usb 2-1: new full speed USB device using uhci_hcd and address 3
>cdc_acm 2-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usb 2-1: USB disconnect, address 3
>usbcore: deregistering driver cdc_acm
>usb 2-1: new full speed USB device using uhci_hcd and address 4
>cdc_acm 2-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: deregistering driver cdc_acm
>usb 2-1: USB disconnect, address 4
>usb 2-1: new full speed USB device using uhci_hcd and address 5
>cdc_acm 2-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usb 2-1: USB disconnect, address 5
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usb 1-1: USB disconnect, address 2
>usb 1-1: new full speed USB device using uhci_hcd and address 3
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usb 1-1: USB disconnect, address 3
>usb 1-1: new full speed USB device using uhci_hcd and address 4
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usb 1-1: USB disconnect, address 4
>usb 1-1: new full speed USB device using uhci_hcd and address 5
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usb 1-1: USB disconnect, address 5
>usb 1-1: new full speed USB device using uhci_hcd and address 6
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usb 1-1: USB disconnect, address 6
>usbcore: deregistering driver cdc_acm
>usb 1-1: new full speed USB device using uhci_hcd and address 7
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usb 1-1: USB disconnect, address 7
>usb 1-1: new full speed USB device using uhci_hcd and address 8
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usb 1-1: USB disconnect, address 8
>usb 1-1: new full speed USB device using uhci_hcd and address 9
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usbcore: deregistering driver cdc_acm
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: deregistering driver cdc_acm
>usb 1-1: USB disconnect, address 9
>usb 1-1: new full speed USB device using uhci_hcd and address 10
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usb 1-1: USB disconnect, address 10
>usb 1-1: new full speed USB device using uhci_hcd and address 11
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usb 1-1: USB disconnect, address 11
>usb 1-1: new full speed USB device using uhci_hcd and address 12
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usbcore: deregistering driver cdc_acm
>usb 1-1: USB disconnect, address 12
>usb 2-1: new full speed USB device using uhci_hcd and address 6
>cdc_acm 2-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: deregistering driver cdc_acm
>usb 2-1: USB disconnect, address 6
>usb 2-1: new full speed USB device using uhci_hcd and address 7
>cdc_acm 2-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: deregistering driver cdc_acm
>usb 2-1: USB disconnect, address 7
>usb 1-1: new full speed USB device using uhci_hcd and address 13
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: deregistering driver cdc_acm
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: registered new driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
>usbcore: registered new driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
>usbcore: deregistering driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial deregistering driver Generic
>usbcore: deregistering driver usbserial
>usbcore: deregistering driver cdc_acm
>usb 1-1: USB disconnect, address 13
>usb 1-1: new full speed USB device using uhci_hcd and address 14
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>usbcore: deregistering driver cdc_acm
>usb 1-1: USB disconnect, address 14
>usb 1-1: new full speed USB device using uhci_hcd and address 15
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>usbcore: registered new driver cdc_acm
>drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB modems and ISDN adapters
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[354fc0003dc2d010]
>Stopping tasks: =====================================================================================================|
>Freeing memory...  -\|/-\|/-\|/-\done (184155 pages freed)
>ACPI: PCI interrupt for device 0000:02:01.1 disabled
>ACPI: PCI interrupt for device 0000:02:01.0 disabled
>ACPI: PCI interrupt for device 0000:00:1f.5 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>.................................swsusp: Need to copy 15589 pages
>swsusp: Restoring Highmem
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>usb 1-1: USB disconnect, address 15
>ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>usb 1-1: new full speed USB device using uhci_hcd and address 16
>cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>Restarting tasks... done
>ohci1394: $Rev: 1299 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:02:01.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[f8fff000-f8fff7ff]  Max Packet=[2048]
>ACPI: Battery Slot [BAT0] (battery absent)
>ACPI: Battery Slot [BAT1] (battery absent)
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[354fc0003dc2d010]
>usbcore: deregistering driver cdc_acm
>Unable to handle kernel NULL pointer dereference at virtual address 000000d0
> printing eip:
>f96382d7
>*pde = 00000000
>Oops: 0000 [#1]
>Modules linked in: battery ohci1394 cdc_acm cpufreq_ondemand cpufreq_userspace cpufreq_powersave speedstep_ich speedstep_lib freq_table ipv6 vmnet vmmon button ac snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device af_packet edd pcmcia firmware_class ide_cd cdrom yenta_socket rsrc_nonstatic pcmcia_core ieee1394 snd_intel8x0 snd_ac97_codec snd_ac97_bus generic snd_pcm snd_timer snd soundcore snd_page_alloc intel_agp agpgart uhci_hcd usbcore pci_hotplug parport_pc lp parport 3c59x mii dm_mod reiserfs fan thermal processor piix ide_disk ide_core
>CPU:    0
>EIP:    0060:[<f96382d7>]    Tainted: P     U VLI
>EFLAGS: 00010246   (2.6.13-15.7-default) 
>EIP is at usb_driver_release_interface+0x7/0x60 [usbcore]
>eax: f97f3d20   ebx: 00000000   ecx: 00000000   edx: 00000000
>esi: 00000014   edi: f97f3d40   ebp: f97f3d40   esp: dfd3befc
>ds: 007b   es: 007b   ss: 0068
>Process rmmod (pid: 8916, threadinfo=dfd3a000 task=dffd0530)
>Stack: f7709880 e746ec00 f97f2218 00000000 00000000 d7d04600 f97f3d20 f96380b1 
>       d7d04674 d7d04614 c0255fa3 d7d04614 d7d0463c f97f3d88 c0256047 f97f3d40 
>       00000003 bfa8f600 dfd3a000 c0255b2b f97f3d40 c0256278 f97f3d40 f96381a6 
>Call Trace:
> [<f97f2218>] acm_disconnect+0x98/0xd2 [cdc_acm]
> [<f96380b1>] usb_unbind_interface+0x31/0x60 [usbcore]
> [<c0255fa3>] __device_release_driver+0x43/0x60
> [<c0256047>] driver_detach+0x57/0x59
> [<c0255b2b>] bus_remove_driver+0x3b/0x60
> [<c0256278>] driver_unregister+0x8/0x20
> [<f96381a6>] usb_deregister+0x26/0x40 [usbcore]
> [<f97f22da>] acm_exit+0xa/0x1e [cdc_acm]
> [<c0132598>] sys_delete_module+0x118/0x150
> [<c014d3ee>] unmap_vma_list+0xe/0x20
> [<c014d747>] do_munmap+0xb7/0xf0
> [<c0102d79>] syscall_call+0x7/0xb
>Code: cc c6 31 c9 85 c0 74 d1 89 d8 e8 05 db c1 c6 31 c9 89 c8 5b 5e c3 8d b4 26 00 00 00 00 8d bc 27 00 00 00 00 56 8d 72 14 53 89 d3 <8b> 96 bc 00 00 00 85 d2 74 07 83 c0 20 39 c2 74 08 5b 5e c3 90 
>

Actions: View

Attachments on bug 143408: 63509 | 63521 | 63944 | 64005 | 64009 | 64070