Attachment 64231 Details for Bug 143397

festival init script

festival (text/plain), 6.74 KB, created by Andreas Schneider on 2006-01-20 11:54:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Andreas Schneider

Created: 2006-01-20 11:54:43 UTC

Size: 6.74 KB

patch

obsolete

>#! /bin/sh
># Copyright (c) 2006 Andreas Schneider <mail@cynapses.org>.
># This file and all modifications and additions to the pristine
># package are under the same license as the package itself.
>#
># /etc/init.d/festival
>#   and its symbolic link
># /(usr/)sbin/rcfestival
>#
># LSB compatible service control script; see http://www.linuxbase.org/spec/
># 
>### BEGIN INIT INFO
># Provides:          festival
># Required-Start:    $syslog $remote_fs
># Should-Start: $time ypbind sendmail
># Required-Stop:     $syslog $remote_fs
># Should-Stop: $time ypbind sendmail
># Default-Start:     3 5
># Default-Stop:      0 1 2 6
># Short-Description: festival daemon providing full text-to-speech system
># Description:       Start festival to allow applications to access a
>#	text-to-speech system with various APIs, as well as an environment
>#	for development and research of speech synthesis techniques. It is
>#	written in C++ and has a Scheme-based command interpreter for
>#	general control. 
>### END INIT INFO
>
>
>#
># Note on runlevels:
># 0 - halt/poweroff 			6 - reboot
># 1 - single user			2 - multiuser without network exported
># 3 - multiuser w/ network (text mode)  5 - multiuser w/ network and X11 (xdm)
># 
># Note on script names:
># http://www.linuxbase.org/spec/refspecs/LSB_1.3.0/gLSB/gLSB/scrptnames.html
># A registry has been set up to manage the init script namespace.
># http://www.lanana.org/
># Please use the names already registered or register one or use a
># vendor prefix.
>
>
># Check for missing binaries (stale symlinks should not happen)
># Note: Special treatment of stop for LSB conformance
>FESTIVAL_BIN=/usr/bin/festival
>test -x $FESTIVAL_BIN || { echo "$FESTIVAL_BIN not installed"; 
>	if [ "$1" = "stop" ]; then exit 0;
>	else exit 5; fi; }
>
># Check for existence of needed config file and read it
>FESTIVAL_CONFIG=/etc/sysconfig/festival
>test -r $FESTIVAL_CONFIG || { echo "$FESTIVAL_CONFIG not existing";
>	if [ "$1" = "stop" ]; then exit 0;
>	else exit 6; fi; }
>
># Read config	
>. $FESTIVAL_CONFIG
>
># Source LSB init functions
># providing start_daemon, killproc, pidofproc, 
># log_success_msg, log_failure_msg and log_warning_msg.
># This is currently not used by UnitedLinux based distributions and
># not needed for init scripts for UnitedLinux only. If it is used,
># the functions from rc.status should not be sourced or used.
>#. /lib/lsb/init-functions
>
># Shell functions sourced from /etc/rc.status:
>#      rc_check         check and set local and overall rc status
>#      rc_status        check and set local and overall rc status
>#      rc_status -v     be verbose in local rc status and clear it afterwards
>#      rc_status -v -r  ditto and clear both the local and overall rc status
>#      rc_status -s     display "skipped" and exit with status 3
>#      rc_status -u     display "unused" and exit with status 3
>#      rc_failed        set local and overall rc status to failed
>#      rc_failed <num>  set local and overall rc status to <num>
>#      rc_reset         clear both the local and overall rc status
>#      rc_exit          exit appropriate to overall rc status
>#      rc_active        checks whether a service is activated by symlinks
>. /etc/rc.status
>
># Reset status of this service
>rc_reset
>
># Return values acc. to LSB for all commands but status:
># 0	  - success
># 1       - generic or unspecified error
># 2       - invalid or excess argument(s)
># 3       - unimplemented feature (e.g. "reload")
># 4       - user had insufficient privileges
># 5       - program is not installed
># 6       - program is not configured
># 7       - program is not running
># 8--199  - reserved (8--99 LSB, 100--149 distrib, 150--199 appl)
># 
># Note that starting an already running service, stopping
># or restarting a not-running service as well as the restart
># with force-reload (in case signaling is not supported) are
># considered a success.
>
>case "$1" in
>    start)
>	echo -n "Starting festival "
>	## Start daemon with startproc(8). If this fails
>	## the return value is set appropriately by startproc.
>	#/sbin/startproc -u "$FESTIVAL_USERID" -g "$FESTIVAL_GROUPID" -e $FESTIVAL_BIN $FESTIVAL_OPTIONS >/dev/null 2>&1
>	/sbin/startproc $FESTIVAL_BIN $FESTIVAL_OPTIONS >/dev/null 2>&1
>
>	# Remember status and be verbose
>	rc_status -v
>	;;
>    stop)
>	echo -n "Shutting down festival "
>	## Stop daemon with killproc(8) and if this fails
>	## killproc sets the return value according to LSB.
>
>	/sbin/killproc -TERM $FESTIVAL_BIN
>
>	# Remember status and be verbose
>	rc_status -v
>	;;
>    try-restart|condrestart)
>	## Do a restart only if the service was active before.
>	## Note: try-restart is now part of LSB (as of 1.9).
>	## RH has a similar command named condrestart.
>	if test "$1" = "condrestart"; then
>		echo "${attn} Use try-restart ${done}(LSB)${attn} rather than condrestart ${warn}(RH)${norm}"
>	fi
>	$0 status
>	if test $? = 0; then
>		$0 restart
>	else
>		rc_reset	# Not running is not a failure.
>	fi
>	# Remember status and be quiet
>	rc_status
>	;;
>    restart)
>	## Stop the service and regardless of whether it was
>	## running or not, start it again.
>	$0 stop
>	$0 start
>
>	# Remember status and be quiet
>	rc_status
>	;;
>    force-reload)
>	## Signal the daemon to reload its config. Most daemons
>	## do this on signal 1 (SIGHUP).
>	## If it does not support it, restart the service if it
>	## is running.
>
>	echo -n "Reload service festival "
>	## if it supports it:
>	/sbin/killproc -HUP $FESTIVAL_BIN
>	#touch /var/run/festival.pid
>	rc_status -v
>
>	## Otherwise:
>	#$0 try-restart
>	#rc_status
>	;;
>    reload)
>	## Like force-reload, but if daemon does not support
>	## signaling, do nothing (!)
>
>	# If it supports signaling:
>	echo -n "Reload service festival "
>	/sbin/killproc -HUP $FESTIVAL_BIN
>	#touch /var/run/festival.pid
>	rc_status -v
>	
>	## Otherwise if it does not support reload:
>	#rc_failed 3
>	#rc_status -v
>	;;
>    status)
>	echo -n "Checking for service festival "
>	## Check status with checkproc(8), if process is running
>	## checkproc will return with exit status 0.
>
>	# Return value is slightly different for the status command:
>	# 0 - service up and running
>	# 1 - service dead, but /var/run/  pid  file exists
>	# 2 - service dead, but /var/lock/ lock file exists
>	# 3 - service not running (unused)
>	# 4 - service status unknown :-(
>	# 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.)
>	
>	# NOTE: checkproc returns LSB compliant status values.
>	/sbin/checkproc $FESTIVAL_BIN
>	# NOTE: rc_status knows that we called this init script with
>	# "status" option and adapts its messages accordingly.
>	rc_status -v
>	;;
>    probe)
>	## Optional: Probe for the necessity of a reload, print out the
>	## argument to this init script which is required for a reload.
>	## Note: probe is not (yet) part of LSB (as of 1.9)
>
>	test /etc/festival.scm -nt /var/run/festival.pid && echo reload
>	;;
>    *)
>	echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
>	exit 1
>	;;
>esac
>rc_exit

Actions: View

Attachments on bug 143397: 63491 | 63492 | 64231