Attachment 64413 Details for Bug 144652

boot.msg

boot.msg (text/plain), 25.42 KB, created by Juan Erbes on 2006-01-22 14:55:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Juan Erbes

Created: 2006-01-22 14:55:14 UTC

Size: 25.42 KB

patch

obsolete

>Inspecting /boot/System.map-2.6.15-rc6-git2-2-default
>Loaded 22101 symbols from /boot/System.map-2.6.15-rc6-git2-2-default.
>Symbols match kernel version 2.6.15.
>No module symbols loaded - kernel modules not enabled.
>
>klogd 1.4.1, log source = ksyslog started.
><5>Linux version 2.6.15-rc6-git2-2-default (geeko@buildhost) (gcc version 4.1.0 20051221 (prerelease) (SUSE Linux)) #1 Thu Dec 22 15:15:42 CET 2005
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
><4> BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000001fffb000 (usable)
><4> BIOS-e820: 000000001fffb000 - 000000001ffff000 (ACPI data)
><4> BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
><4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
><5>0MB HIGHMEM available.
><5>511MB LOWMEM available.
><7>On node 0 totalpages: 131067
><7>  DMA zone: 4096 pages, LIFO batch:0
><7>  DMA32 zone: 0 pages, LIFO batch:0
><7>  Normal zone: 126971 pages, LIFO batch:31
><7>  HighMem zone: 0 pages, LIFO batch:0
><6>DMI 2.3 present.
><7>ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5e30
><7>ACPI: RSDT (v001 ASUS   A7V600   0x42302e31 MSFT 0x31313031) @ 0x1fffb000
><7>ACPI: FADT (v001 ASUS   A7V600   0x42302e31 MSFT 0x31313031) @ 0x1fffb0b2
><7>ACPI: BOOT (v001 ASUS   A7V600   0x42302e31 MSFT 0x31313031) @ 0x1fffb030
><7>ACPI: MADT (v001 ASUS   A7V600   0x42302e31 MSFT 0x31313031) @ 0x1fffb058
><7>ACPI: DSDT (v001   ASUS A7V600   0x00001000 MSFT 0x0100000b) @ 0x00000000
><6>ACPI: PM-Timer IO Port: 0xe408
><6>ACPI: local apic disabled
><4>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
><4>Built 1 zonelists
><5>Kernel command line: root=/dev/sda2 vga=0x31a selinux=0    resume=/dev/sda1  splash=silent
><6>bootsplash: silent mode.
><6>Initializing CPU#0
><4>PID hash table entries: 2048 (order: 11, 32768 bytes)
><4>Detected 1916.821 MHz processor.
><6>Using pmtmr for high-res timesource
><4>Console: colour dummy device 80x25
><4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
><4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
><6>Memory: 513576k/524268k available (1469k kernel code, 10088k reserved, 601k data, 188k init, 0k highmem)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 3836.95 BogoMIPS (lpj=7673917)
><6>Security Framework v1.0.0 initialized
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
><7>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><7>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>mtrr: v2.0 (20020519)
><4>CPU: AMD Athlon(TM) XP 2600+ stepping 00
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Checking 'hlt' instruction... OK.
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 2534k freed
><4> not found!
><4>ACPI: setting ELCR to 0200 (from 0e88)
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
><6>PCI: Using configuration type 1
><6>ACPI: Subsystem revision 20050902
><6>ACPI: Interpreter enabled
><6>ACPI: Using PIC for interrupt routing
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12)
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled.
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
><7>Boot video device is 0000:01:00.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 12 devices
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><4>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
><6>pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
><6>pnp: 00:01: ioport range 0xe800-0xe81f has been reserved
><6>pnp: 00:0b: ioport range 0x290-0x297 has been reserved
><6>pnp: 00:0b: ioport range 0x370-0x375 has been reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: disabled.
><6>  MEM window: ea000000-ebefffff
><6>  PREFETCH window: ebf00000-efffffff
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><6>Simple Boot Flag at 0x3a set to 0x1
><6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
><5>apm: overridden by ACPI.
><6>audit: initializing netlink socket (disabled)
><5>audit(1137924398.932:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>Initializing Cryptographic API
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered
><6>PCI: Bypassing VIA 8237 APIC De-Assert Message
><6>vesafb: framebuffer at 0xec000000, mapped to 0xe0880000, using 10240k, total 65536k
><6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
><6>vesafb: protected mode interface info at c000:ed00
><6>vesafb: scrolling: redraw
><6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
><4>vesafb: Mode is VGA compatible
><6>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 112645 bytes,<6>...found (1280x1024, 17839 bytes, v3).
><4>Console: switching to colour frame buffer device 158x59
><6>fb0: VESA VGA frame buffer device
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
><6>loop: loaded (max 64 devices)
><6>mice: PS/2 mouse device common for all mice
><6>input: PC Speaker as /class/input/input0
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>NET: Registered protocol family 2
><6>input: AT Translated Set 2 keyboard as /class/input/input1
><4>IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
><4>TCP established hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
><6>TCP: Hash tables configured (established 32768 bind 32768)
><6>TCP reno registered
><6>NET: Registered protocol family 1
><4>Using IPI Shortcut mode
><4>ACPI wakeup devices: 
><4>PCI0 PCI1 USB0 USB1 USB2 USB3 SU20 MC97 
><6>ACPI: (supports S0 S1 S4 S5)
><6>Freeing unused kernel memory: 188k freed
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><5>SCSI subsystem initialized
><7>libata version 1.20 loaded.
><7>sata_via 0000:00:0f.0: version 1.1
><4>ACPI: PCI Interrupt Link [LNKF] BIOS reported IRQ 0, using IRQ 9
><4>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
><4>PCI: setting IRQ 9 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9
><6>PCI: Via IRQ fixup for 0000:00:0f.0, from 0 to 9
><6>sata_via 0000:00:0f.0: routed to hard irq line 9
><6>ata1: SATA max UDMA/133 cmd 0xB800 ctl 0xB402 bmdma 0xA400 irq 9
><6>ata2: SATA max UDMA/133 cmd 0xB000 ctl 0xA802 bmdma 0xA408 irq 9
><6>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
><7>ata1: dev 0 cfg 49:2f00 82:746b 83:7fe8 84:4023 85:7469 86:3e00 87:4023 88:203f
><6>ata1: dev 0 ATA-6, max UDMA/100, 156250000 sectors: LBA48
><6>ata1: dev 0 configured for UDMA/100
><6>scsi0 : sata_via
><6>ata2: no device found (phy stat 00000000)
><6>scsi1 : sata_via
><5>  Vendor: ATA       Model: HDS722580VLSA80   Rev: V32O
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
><5>SCSI device sda: drive cache: write back
><6> sda: sda1 sda2 sda3 sda4
><5>sd 0:0:0:0: Attached scsi disk sda
><5>sd 0:0:0:0: Attached scsi generic sg0 type 0
><6>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
><4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9
><6>ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
><6>PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
><6>VP_IDE: chipset revision 6
><6>VP_IDE: not 100% native mode: will probe irqs later
><6>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
><6>    ide0: BM-DMA at 0x9800-0x9807, BIOS settings: hda:DMA, hdb:pio
><7>Probing IDE interface ide0...
><4>hda: TOSHIBA CD/DVDW SD-R5372, ATAPI CD/DVD-ROM drive
><4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
><4>Attempting manual resume
><5>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
><5>ReiserFS: sda2: using ordered data mode
><5>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: sda2: checking transaction log (sda2)
><5>ReiserFS: sda2: Using r5 hash to sort names
><6>md: Autodetecting RAID arrays.
><6>md: autorun ...
><6>md: ... autorun DONE.
><6>lp: driver loaded but no devices found
><6>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>agpgart: Detected VIA KT400/KT400A/KT600 chipset
><6>agpgart: AGP aperture is 128M @ 0xf0000000
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><6>gameport: EMU10K1 is pci0000:00:0e.1/gameport0, io 0xd000, speed 1242kHz
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><4>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
><4>PCI: setting IRQ 11 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
><6>ehci_hcd 0000:00:10.4: EHCI Host Controller
><6>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:10.4: irq 11, io mem 0xe9000000
><6>USB Universal Host Controller Interface driver v2.3
><6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
><6>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>hub 1-0:1.0: USB hub found
><6>uhci_hcd 0000:00:10.0: UHCI Host Controller
><6>hub 1-0:1.0: 8 ports detected
><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
><4>PCI: setting IRQ 10 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:10.0: irq 9, io base 0x00009400
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKE] -> GSI 9 (level, low) -> IRQ 9
><6>uhci_hcd 0000:00:10.1: UHCI Host Controller
><6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
><4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 3
><4>PCI: setting IRQ 3 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
><6>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKC] -> GSI 3 (level, low) -> IRQ 3
><4>eth0: 3Com Gigabit LOM (3C940)
><4>      PrefPort:A  RlmtMode:Check Link State
><6>uhci_hcd 0000:00:10.1: irq 9, io base 0x00009000
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9
><6>uhci_hcd 0000:00:10.2: UHCI Host Controller
><6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:10.2: irq 9, io base 0x00008800
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9
><6>PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 9
><6>uhci_hcd 0000:00:10.3: UHCI Host Controller
><6>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:10.3: irq 9, io base 0x00008400
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
><5>ReiserFS: sda4: found reiserfs format "3.6" with standard journal
><5>ReiserFS: sda4: using ordered data mode
><5>ReiserFS: sda4: journal params: device sda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
><5>ReiserFS: sda4: checking transaction log (sda4)
><5>ReiserFS: sda4: Using r5 hash to sort names
>Kernel logging (ksyslog) stopped.
>Kernel log daemon terminating.
>
>Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Jan 22 07:06:48 2006
>
>Configuring serial ports...
>/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
>Configured serial ports
>done<notice>startproc: execve (/sbin/udevd) [ /sbin/udevd --daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/sbin:/bin vga=0x31a DO_CONFIRM= RUNLEVEL=S PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/sbin/udevd ]
>Starting udevd done
>Activating device mapper...
>Creating /dev/mapper/control character device with major:10 minor:63.
>done
>Checking file systems...
>fsck 1.38 (30-Jun-2005)
>Reiserfs super block in block 16 on 0x804 of format 3.6 with standard journal
>Blocks (total/free): 9460272/2497462 by 4096 bytes
>Filesystem is clean
>Replaying journal..
>Reiserfs journal '/dev/sda4' in blocks [18..8211]: 0 transactions replayed
>Checking internal tree..finished
>doneSetting up kernel module dependencies (if required)done
>Mounting local file systems...
>proc on /proc type proc (rw)
>sysfs on /sys type sysfs (rw)
>udev on /dev type tmpfs (rw)
>devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
>/dev/sda4 on /home type reiserfs (rw,acl,user_xattr)
>/dev/sda3 on /windows/C type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002)
>mount: mount point /media/usbdisk does not exist
>failedSetting up the hardware clock<notice>killproc: kill(1034,29)
>done
>Loading required kernel modules
>doneSetting up hostname 'linux'done
>Setting up loopback interface     lo        
>    lo        IP address: 127.0.0.1/8   
>done
>done
>Creating /var/log/boot.msg
>doneActivating remaining swap-devices in /etc/fstab...
>doneSetting current sysctl status from /etc/sysctl.conf
>net.ipv4.icmp_echo_ignore_broadcasts = 1
>net.ipv4.conf.all.rp_filter = 1
>done
>Enabling syn flood protectiondone
>Disabling IP forwardingdone
>done
>System Boot Control: The system has been set up
>System Boot Control: Running /etc/init.d/boot.local
>done<notice>killproc: kill(1034,3)
>
>INIT: 
>Boot logging started on /dev/tty1(/dev/console) at Sun Jan 22 10:07:00 2006
>
>Master Resource Control: previous runlevel: N, switching to runlevel: 5
>Entering runlevel: 5
>
>
><notice> --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ]
>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemonStarting D-BUS daemondone
><notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/sbin/acpid ]
>[acpid]: starting up
>
>
>acpid: loading ACPI modules ( ac battery button ) done
>Starting acpid done
>[acpid]: 0 rules loaded
>
>
><notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 SPLASH=yes splash=silent selinux=0 ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
><notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 SPLASH=yes splash=silent selinux=0 ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/sbin/klogd ]
>Starting syslog servicesdone
>Initializing random number generatordone
><notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/sbin/resmgrd ]
>Verify the apropriate mtrr setting no valid memory size has been found!failed
>Starting resource managerdone
><notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes --retain-privileges ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/hald ]
>Starting HAL daemondone
>Setting up the hardware clockdone
>Loading keymap i386/qwerty/es.map.gz
>doneLoading compose table latin1.adddone
>Start Unicode mode
>doneLoading console font lat9w-16.psfu  -m trivial G0:loadable
>doneSetting up network interfaces:
>    lo        
>    lo        IP address: 127.0.0.1/8   
>doneWaiting for mandatory devices:  eth-id-00:0b:6a:f0:57:fa __NSC__
>19 17 16 15 Starting service kdm<notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=es_ES.UTF-8 PREVLEVEL=N LINES=59 HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/X11R6/bin/kde SPLASH=yes splash=silent selinux=0 ROOTFS_BLKDEV=/dev/sda2 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ]
>done
>14 <notice>checkproc: /opt/kde3/bin/kdm 3185
><notice>killproc: kill(3178,15)
><notice>pidofproc: dhcpcd 3291
>1 
>    eth1      device: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12)
>    eth1      configuration: eth-id-00:0b:6a:f0:57:fa
>    eth1      DHCP client (dhcpcd) is running
>    eth1      IP address: 192.168.1.2/24
>done    dsl0      
>done    modem0    
>    modem0    Startmode is 'manual'
>skippedSetting up service network  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .done
>Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/sbin/portmap ]
>done
>Importing Net File System (NFS)unused
>Starting nfsboot (sm-notify) done
><notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ]
>Starting cupsddone
>Starting service automounterdone
><notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ]
>Starting up sensors: done
>Starting network time protocol daemon (NTPD)done
><notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
><notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
>Starting CRON daemondone
>Starting PC/SC smart card daemon Starting Name Service Cache Daemondone
><notice>startproc: execve (/usr/sbin/pcscd) [ /usr/sbin/pcscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/pcscd ]
>done
>Searching for unresolved configuration filesdone
>Please check the following files (see /var/adm/rpmconfigcheck):
>    /etc/fonts/suse-hinting.conf.rpmsave
>    /etc/localtime.rpmnew
>    /etc/sane.d/dll.conf.rpmnew
>    /etc/udev/rules.d/30-net_persistent_names.rules.rpmnew
>    /etc/udev/rules.d/50-udev-default.rules.rpmsave
>    /opt/kde3/share/config/kdm/kdmrc.rpmnew
>    /usr/lib/ooo-2.0/share/dict/ooo/dictionary.lst.rpmsave
>Searching for configured scanners in SANE.
>No scanner device files found.done
><notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
><notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=158 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x31a RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/SuSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=59 SHLVL=2 HOME=/ splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/sda2 selinux=0 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
><notice>checkproc: /opt/kde3/bin/kdm 3185
>Starting SMPPPDdone
>Starting SSH daemondone
>done
>Master Resource Control: runlevel 5 has been reached
>Skipped services in runlevel 5: nfs
><notice>killproc: kill(2253,3)

Actions: View

Attachments on bug 144652: 64413 | 64414