Bugzilla – Attachment 64782 Details for
Bug 145025
suspend to disk
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
IDP Log In
|
Forgot Password
output of dmesg command after a failed suspend to disk
dmesg.txt (text/plain), 28.10 KB, created by
Gavin Hyde
on 2006-01-24 15:35:27 UTC
(
hide
)
Description:
output of dmesg command after a failed suspend to disk
Filename:
MIME Type:
Creator:
Gavin Hyde
Created:
2006-01-24 15:35:27 UTC
Size:
28.10 KB
patch
obsolete
>Linux version 2.6.15-git12-6-smp (geeko@buildhost) (gcc version 4.1.0 20060109 (prerelease) (SUSE Linux)) #1 SMP Tue Jan 17 14:22:14 UTC 2006 >BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) > BIOS-e820: 000000003ffd0000 - 000000003ffdf000 (ACPI data) > BIOS-e820: 000000003ffdf000 - 0000000040000000 (ACPI NVS) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) >127MB HIGHMEM available. >896MB LOWMEM available. >found SMP MP-table at 000ff780 >On node 0 totalpages: 262096 > DMA zone: 4096 pages, LIFO batch:0 > DMA32 zone: 0 pages, LIFO batch:0 > Normal zone: 225280 pages, LIFO batch:31 > HighMem zone: 32720 pages, LIFO batch:7 >DMI 2.3 present. >Using APIC driver default >ACPI: RSDP (v000 ACPIAM ) @ 0x000f5500 >ACPI: RSDT (v001 A M I OEMRSDT 0x10000314 MSFT 0x00000097) @ 0x3ffd0000 >ACPI: FADT (v002 A M I OEMFACP 0x10000314 MSFT 0x00000097) @ 0x3ffd0200 >ACPI: MADT (v001 A M I OEMAPIC 0x10000314 MSFT 0x00000097) @ 0x3ffd0390 >ACPI: OEMB (v001 A M I AMI_OEM 0x10000314 MSFT 0x00000097) @ 0x3ffdf040 >ACPI: DSDT (v001 1ABHI 1ABHI016 0x00000016 INTL 0x02002026) @ 0x00000000 >ACPI: PM-Timer IO Port: 0x408 >ACPI: Local APIC address 0xfee00000 >ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >Processor #0 15:2 APIC version 20 >ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >Processor #1 15:2 APIC version 20 >Overriding APIC driver with bigsmp >ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 >ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >ACPI: IRQ0 used by override. >ACPI: IRQ2 used by override. >ACPI: IRQ9 used by override. >Enabling APIC mode: Physflat. Using 1 I/O APICs >Using ACPI (MADT) for SMP configuration information >Allocating PCI resources starting at 50000000 (gap: 40000000:bff80000) >Built 1 zonelists >Kernel command line: root=/dev/hda7 vga=0x317 selinux=0 splash=silent showopts >bootsplash: silent mode. >Enabling fast FPU save and restore... done. >Enabling unmasked SIMD FPU exception support... done. >Initializing CPU#0 >PID hash table entries: 4096 (order: 12, 65536 bytes) >Detected 3065.003 MHz processor. >Using pmtmr for high-res timesource >Console: colour dummy device 80x25 >Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >Memory: 1032072k/1048384k available (1600k kernel code, 15552k reserved, 737k data, 216k init, 130880k highmem) >Checking if this processor honours the WP bit even in supervisor mode... Ok. >Calibrating delay using timer specific routine.. 6139.07 BogoMIPS (lpj=12278158) >Security Framework v1.0.0 initialized >Mount-cache hash table entries: 512 >CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: Physical Processor ID: 0 >CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#0. >CPU0: Intel P4/Xeon Extended MCE MSRs (12) available >CPU0: Thermal monitoring enabled >mtrr: v2.0 (20020519) >Checking 'hlt' instruction... OK. >checking if image is initramfs... it is >Freeing initrd memory: 2500k freed > not found! >CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 >Leaving ESR disabled. >Enabling SMP... >Booting processor 1/1 eip 3000 >Initializing CPU#1 >Leaving ESR disabled. >Calibrating delay using timer specific routine.. 6129.43 BogoMIPS (lpj=12258873) >CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: Physical Processor ID: 0 >CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#1. >CPU1: Intel P4/Xeon Extended MCE MSRs (12) available >CPU1: Thermal monitoring enabled >CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 >Total of 2 processors activated (12268.51 BogoMIPS). >ENABLING IO-APIC IRQs >..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 >checking TSC synchronization across 2 CPUs: passed. >Enabling SMP... >Brought up 2 CPUs >migration_cost=2000 >NET: Registered protocol family 16 >ACPI: bus type pci registered >PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 >PCI: Using configuration type 1 >ACPI: Subsystem revision 20050902 >ACPI: Interpreter enabled >ACPI: Using IOAPIC for interrupt routing >ACPI: PCI Root Bridge [PCI0] (0000:00) >PCI: Probing PCI hardware (bus 00) >PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO >PCI quirk: region 0500-053f claimed by ICH4 GPIO >PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 >Boot video device is 0000:01:00.0 >PCI: Transparent bridge - 0000:00:1e.0 >PCI: Bus #03 (-#06) may be hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses') >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] >ACPI: Power Resource [URP1] (off) >ACPI: Power Resource [URP2] (off) >ACPI: Power Resource [FDDP] (off) >ACPI: Power Resource [LPTP] (off) >burst-mode-ec-10-Aug >ACPI: Embedded Controller [EC0] (gpe 28) >ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) >ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) >ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. >ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) >Linux Plug and Play Support v0.97 (c) Adam Belay >pnp: PnP ACPI init >pnp: PnP ACPI: found 10 devices >PCI: Using ACPI for IRQ routing >PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report >TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) >pnp: 00:05: ioport range 0x1100-0x113f has been reserved >pnp: 00:05: ioport range 0x1254-0x1254 has been reserved >pnp: 00:05: ioport range 0x12d4-0x12d4 has been reserved >pnp: 00:05: ioport range 0x1300-0x1375 has been reserved >pnp: 00:05: ioport range 0x1377-0x137f has been reserved >PCI: Bridge: 0000:00:01.0 > IO window: b000-bfff > MEM window: dfd00000-dfdfffff > PREFETCH window: afc00000-bfbfffff >PCI: Bus 3, cardbus bridge: 0000:02:03.0 > IO window: 0000c000-0000c0ff > IO window: 0000c400-0000c4ff > PREFETCH window: 50000000-51ffffff > MEM window: 54000000-55ffffff >PCI: Bridge: 0000:00:1e.0 > IO window: c000-cfff > MEM window: dfe00000-dfefffff > PREFETCH window: 50000000-52ffffff >PCI: Setting latency timer of device 0000:00:1e.0 to 64 > ACPI-0201: *** Warning: Device is not power manageable >ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 169 >PCI: Setting latency timer of device 0000:02:03.0 to 64 >apm: BIOS not found. >audit: initializing netlink socket (disabled) >audit(1138092109.500:1): initialized >highmem bounce pool size: 64 pages >Total HugeTLB memory allocated, 0 >VFS: Disk quotas dquot_6.5.1 >Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >Initializing Cryptographic API >io scheduler noop registered >io scheduler anticipatory registered >io scheduler deadline registered >io scheduler cfq registered >0000:00:1d.7 EHCI: early BIOS handoff failed (BIOS bug ?) >vesafb: framebuffer at 0xb0000000, mapped to 0xf8880000, using 6144k, total 65536k >vesafb: mode is 1024x768x16, linelength=2048, pages=41 >vesafb: protected mode interface info at c000:53fd >vesafb: scrolling: redraw >vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 >bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 76011 bytes,<6>...found (1024x768, 12703 bytes, v3). >Console: switching to colour frame buffer device 127x44 >fb0: VESA VGA frame buffer device >isapnp: Scanning for PnP cards... >isapnp: No Plug & Play device found >Real Time Clock Driver v1.12ac >PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 >i8042.c: Detected active multiplexing controller, rev 1.0. >serio: i8042 AUX0 port at 0x60,0x64 irq 12 >serio: i8042 AUX1 port at 0x60,0x64 irq 12 >serio: i8042 AUX2 port at 0x60,0x64 irq 12 >serio: i8042 AUX3 port at 0x60,0x64 irq 12 >serio: i8042 KBD port at 0x60,0x64 irq 1 >Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > ACPI-0201: *** Warning: Device is not power manageable >ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 169 >floppy0: no floppy controllers found >RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize >loop: loaded (max 8 devices) >mice: PS/2 mouse device common for all mice >input: AT Translated Set 2 keyboard as /class/input/input0 >input: PC Speaker as /class/input/input1 >md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 >md: bitmap version 4.39 >NET: Registered protocol family 2 >IP route cache hash table entries: 65536 (order: 6, 262144 bytes) >TCP established hash table entries: 262144 (order: 9, 2097152 bytes) >TCP bind hash table entries: 65536 (order: 7, 524288 bytes) >TCP: Hash tables configured (established 262144 bind 65536) >TCP reno registered >NET: Registered protocol family 1 >Starting balanced_irq >Using IPI No-Shortcut mode >ACPI wakeup devices: >P0P2 LAN1 CBC0 MC97 PS2K PS2M PWRB >ACPI: (supports S0 S3 S4 S5) >Freeing unused kernel memory: 216k freed >Synaptics Touchpad, model: 1, fw: 4.1, id: 0x848a1, caps: 0x0/0x0 >input: SynPS/2 Synaptics TouchPad as /class/input/input2 >Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >ICH4: IDE controller at PCI slot 0000:00:1f.1 >PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) >ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177 >ICH4: chipset revision 2 >ICH4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio >Probing IDE interface ide0... >hda: HTS726060M9AT00, ATA DISK drive >input: ImPS/2 Generic Wheel Mouse as /class/input/input3 >ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >hda: max request size: 512KiB >hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100) >hda: cache flushes supported > hda: hda1 hda2 < hda5 hda6 hda7 > >Probing IDE interface ide1... >hdc: Slimtype COMBO LSC-24082K, ATAPI CD/DVD-ROM drive >ide1 at 0x170-0x177,0x376 on irq 15 >ACPI: Processor [CPU1] (supports 8 throttling states) >ACPI: Processor [CPU2] (supports 8 throttling states) >ACPI: Thermal Zone [THRM] (75 C) >ReiserFS: hda7: found reiserfs format "3.6" with standard journal >ReiserFS: hda7: using ordered data mode >ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >ReiserFS: hda7: checking transaction log (hda7) >ReiserFS: hda7: Using r5 hash to sort names >Adding 1052216k swap on /dev/hda5. Priority:-1 extents:1 across:1052216k >bootsplash: status on console 0 changed to on >parport: PnPBIOS parport detected. >parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] >lp0: using parport0 (interrupt-driven). >device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com >dm-netlink version 0.0.2 loaded >pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >usbcore: registered new driver usbfs >usbcore: registered new driver hub >shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 >Linux agpgart interface v0.101 (c) Dave Jones >ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185 >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >ehci_hcd 0000:00:1d.7: EHCI Host Controller >ehci_hcd 0000:00:1d.7: debug port 1 >PCI: cache line size of 128 is not supported by device 0000:00:1d.7 >ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 >ehci_hcd 0000:00:1d.7: irq 185, io mem 0xdffffc00 >ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >usb usb1: configuration #1 chosen from 1 choice >hub 1-0:1.0: USB hub found >hub 1-0:1.0: 6 ports detected >USB Universal Host Controller Interface driver v2.3 >agpgart: Detected an Intel 845G Chipset. >agpgart: AGP aperture is 256M @ 0xc0000000 >ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193 >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >uhci_hcd 0000:00:1d.0: UHCI Host Controller >uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000df20 >usb usb2: configuration #1 chosen from 1 choice >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 2 ports detected >ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201 >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >uhci_hcd 0000:00:1d.1: UHCI Host Controller >uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 >uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000df40 >usb usb3: configuration #1 chosen from 1 choice >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 2 ports detected >ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177 >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >uhci_hcd 0000:00:1d.2: UHCI Host Controller >uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 >uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000df80 >usb usb4: configuration #1 chosen from 1 choice >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 2 ports detected >hw_random: RNG not detected >PCI: Enabling device 0000:00:1f.5 (0005 -> 0007) >ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 169 >PCI: Setting latency timer of device 0000:00:1f.5 to 64 >i8xx TCO timer: initialized (0x0460). heartbeat=30 sec (nowayout=0) >ieee1394: Initialized config rom entry `ip1394' >natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002 > originally by Donald Becker <becker@scyld.com> > http://www.scyld.com/network/natsemi.html > 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder >intel8x0_measure_ac97_clock: measured 92123 usecs >intel8x0: clocking to 48000 >ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 177 >PCI: Via IRQ fixup for 0000:02:0a.0, from 9 to 1 >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[dfeff800-dfefffff] Max Packet=[2048] IR/IT contexts=[4/8] >ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 169 >Yenta: CardBus bridge found at 0000:02:03.0 [1584:3000] >Yenta O2: res at 0x94/0xD4: 00/ea >Yenta O2: enabling read prefetch/write burst >Yenta: ISA IRQ mask 0x0c38, PCI irq 169 >Socket status: 30000007 >pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff >cs: IO port probe 0xc000-0xcfff: clean. >pcmcia: parent PCI bridge Memory window: 0xdfe00000 - 0xdfefffff >pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x52ffffff > ACPI-0201: *** Warning: Device is not power manageable >ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 17 (level, low) -> IRQ 169 >natsemi eth0: NatSemi DP8381[56] at 0xdfefe000 (0000:02:0c.0), 00:03:0d:08:f0:b8, IRQ 169, port TP. >cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 >cs: IO port probe 0x100-0x3af: clean. >cs: IO port probe 0xc00-0xcff: clean. >cs: IO port probe 0x820-0x8ff: clean. >cs: IO port probe 0xa00-0xaff: clean. >ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d497555e7ee] >NTFS driver 2.1.25 [Flags: R/W MODULE]. >NTFS volume version 3.1. >NET: Registered protocol family 10 >lo: Disabled Privacy Extensions >IPv6 over IPv4 tunneling driver >x_tables: module not supported by Novell, setting U taint flag. >ip6_tables: (C) 2000-2006 Netfilter Core Team >ip_tables: (C) 2000-2006 Netfilter Core Team >Netfilter messages via NETLINK v0.30. >ip_conntrack version 2.4 (8190 buckets, 65520 max) - 232 bytes per conntrack >xt_state: module not supported by Novell, setting U taint flag. >xt_tcpudp: module not supported by Novell, setting U taint flag. >bootsplash: status on console 0 changed to on >ACPI: AC Adapter [AC0] (on-line) >ACPI: Battery Slot [BAT0] (battery present) >ACPI: Power Button (FF) [PWRF] >ACPI: Lid Switch [LID] >ACPI: Sleep Button (CM) [SLPB] >ACPI: Power Button (CM) [PWRB] >BIOS EDD facility v0.16 2004-Jun-25, 1 devices found >eth0: DSPCFG accepted after 0 usec. >eth0: link up. >eth0: Setting full-duplex based on negotiated link capability. >NET: Registered protocol family 17 >Bluetooth: Core ver 2.8 >NET: Registered protocol family 31 >Bluetooth: HCI device and connection manager initialized >Bluetooth: HCI socket layer initialized >IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com> >microcode: CPU1 updated from revision 0x14 to 0x2e, date = 08112004 >microcode: CPU0 updated from revision 0x14 to 0x2e, date = 08112004 >IA-32 Microcode Update Driver v1.14 unregistered >Bluetooth: L2CAP ver 2.8 >Bluetooth: L2CAP socket layer initialized >Bluetooth: HIDP (Human Interface Emulation) ver 1.1 >bootsplash: status on console 0 changed to on >Bluetooth: RFCOMM socket layer initialized >Bluetooth: RFCOMM TTY layer initialized >Bluetooth: RFCOMM ver 1.6 >powernow: This module only works with AMD K7 CPUs >eth0: no IPv6 routers present >xt_limit: module not supported by Novell, setting U taint flag. >xt_pkttype: module not supported by Novell, setting U taint flag. >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=7 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=8 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=9 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=163 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=143 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=89 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=69 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=139 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=119 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=139 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=119 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=230 TOS=0x00 PREC=0x00 TTL=255 ID=4 DF PROTO=UDP SPT=5353 DPT=5353 LEN=210 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=14 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=16 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=17 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=18 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=19 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=20 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=21 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=22 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=23 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=99 TOS=0x00 PREC=0x00 TTL=255 ID=24 DF PROTO=UDP SPT=5353 DPT=5353 LEN=79 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=1 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=73 TOS=0x00 PREC=0x00 TTL=255 ID=2 DF PROTO=UDP SPT=5353 DPT=5353 LEN=53 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=3 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=16 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=18 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=20 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=22 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=23 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=24 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=25 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=268 TOS=0x00 PREC=0x00 TTL=255 ID=26 DF PROTO=UDP SPT=5353 DPT=5353 LEN=248 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=27 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=28 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 >pnp: Device 00:08 disabled. >parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff >parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff >parport 0x378: You gave this address, but there is probably no parallel port there! >parport0: PC-style at 0x378 [PCSPP,TRISTATE] >pnp: Device 00:08 activated. >parport: PnPBIOS parport detected. >parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] >lp0: using parport0 (interrupt-driven). >SCSI subsystem initialized >ppa: Version 2.07 (for Linux 2.4.x) >hdc: ATAPI 47X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) >Uniform CD-ROM driver Revision: 3.20 >st: Version 20050830, fixed bufsize 32768, s/g segs 256 >subfs 0.9 >pnp: Device 00:08 disabled. >parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff >parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff >parport 0x378: You gave this address, but there is probably no parallel port there! >parport0: PC-style at 0x378 [PCSPP,TRISTATE] >pnp: Device 00:08 activated. >parport: PnPBIOS parport detected. >parport0: PC-style at 0x378, irq 7 [PCSPP,EPP] >lp0: using parport0 (interrupt-driven). >ppa: Version 2.07 (for Linux 2.4.x) >SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=10.138.5.10 DST=224.0.0.251 LEN=74 TOS=0x00 PREC=0x00 TTL=255 ID=29 DF PROTO=UDP SPT=5353 DPT=5353 LEN=54 >uhci_hcd 0000:00:1d.2: remove, state 1 >usb usb4: USB disconnect, address 1 >uhci_hcd 0000:00:1d.2: USB bus 4 deregistered >uhci_hcd 0000:00:1d.1: remove, state 1 >usb usb3: USB disconnect, address 1 >uhci_hcd 0000:00:1d.1: USB bus 3 deregistered >uhci_hcd 0000:00:1d.0: remove, state 1 >usb usb2: USB disconnect, address 1 >uhci_hcd 0000:00:1d.0: USB bus 2 deregistered >ieee1394: Node removed: ID:BUS[0-00:1023] GUID[00030d497555e7ee] >Freezing cpus ... >Breaking affinity for irq 57 >Breaking affinity for irq 97 >Breaking affinity for irq 105 >Breaking affinity for irq 137 >Breaking affinity for irq 145 >Breaking affinity for irq 185 >Breaking affinity for irq 193 >Breaking affinity for irq 201 >CPU 1 is now offline >migration_cost=2000 >CPU1 is down >Stopping tasks: ============================================================================================================================================================================| >Shrinking memory... -\|/-\|/-done (149351 pages freed) >pnp: Device 00:08 disabled. >eth0: remaining active for wake-on-lan >.................................swsusp: Need to copy 96478 pages >swsusp: critical section/: done (96478 pages copied) >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#0. >CPU0: Intel P4/Xeon Extended MCE MSRs (12) available >CPU0: Thermal monitoring enabled >swsusp: Restoring Highmem >PCI: Enabling device 0000:00:1d.7 (0000 -> 0002) >ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185 >PCI: Setting latency timer of device 0000:00:1d.7 to 64 >usb usb1: root hub lost power or was reset >ehci_hcd 0000:00:1d.7: debug port 1 >PCI: cache line size of 128 is not supported by device 0000:00:1d.7 >ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >PCI: Setting latency timer of device 0000:00:1e.0 to 64 >ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177 >ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 169 >PCI: Setting latency timer of device 0000:00:1f.5 to 64 >ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 17 (level, low) -> IRQ 169 >Yenta O2: res at 0x94/0xD4: 00/ea >Yenta O2: enabling read prefetch/write burst >ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 177 >ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 17 (level, low) -> IRQ 169 >eth0: DSPCFG accepted after 0 usec. >eth0: Setting full-duplex based on negotiated link capability. >pnp: Failed to activate device 00:06. >pnp: Failed to activate device 00:07. >pnp: Device 00:08 activated. >swsusp: Cannot find swap device, try swapon -a. >Restarting tasks... done >Thawing cpus ... >Booting processor 1/1 eip 3000 >Initializing CPU#1 >Leaving ESR disabled. >Calibrating delay using timer specific routine.. 6129.74 BogoMIPS (lpj=12259489) >CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 >CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 >CPU: Trace cache: 12K uops, L1 D cache: 8K >CPU: L2 cache: 512K >CPU: Physical Processor ID: 0 >CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 >Intel machine check architecture supported. >Intel machine check reporting enabled on CPU#1. >CPU1: Intel P4/Xeon Extended MCE MSRs (12) available >CPU1: Thermal monitoring enabled >CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09 >Enabling SMP... >migration_cost=2000 >CPU1 is up >ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 18 (level, low) -> IRQ 177 >ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[dfeff800-dfefffff] Max Packet=[2048] IR/IT contexts=[4/8] >USB Universal Host Controller Interface driver v2.3 >ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193 >PCI: Setting latency timer of device 0000:00:1d.0 to 64 >uhci_hcd 0000:00:1d.0: UHCI Host Controller >uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 >uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000df20 >usb usb2: configuration #1 chosen from 1 choice >hub 2-0:1.0: USB hub found >hub 2-0:1.0: 2 ports detected >ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201 >PCI: Setting latency timer of device 0000:00:1d.1 to 64 >uhci_hcd 0000:00:1d.1: UHCI Host Controller >uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 >uhci_hcd 0000:00:1d.1: irq 201, io base 0x0000df40 >usb usb3: configuration #1 chosen from 1 choice >hub 3-0:1.0: USB hub found >hub 3-0:1.0: 2 ports detected >ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177 >PCI: Setting latency timer of device 0000:00:1d.2 to 64 >uhci_hcd 0000:00:1d.2: UHCI Host Controller >uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 >uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000df80 >usb usb4: configuration #1 chosen from 1 choice >hub 4-0:1.0: USB hub found >hub 4-0:1.0: 2 ports detected >ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d497555e7ee] >NTFS volume version 3.1.
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
Actions:
View
Attachments on
bug 145025
:
64777
| 64782 |
64838