Attachment 65417 Details for Bug 117749

dmesg output as requested with comment #61.

dmesg (text/plain), 17.61 KB, created by Lars Müller on 2006-01-27 14:39:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Lars Müller

Created: 2006-01-27 14:39:44 UTC

Size: 17.61 KB

patch

obsolete

>Linux version 2.6.16-rc1-git3-5-default (geeko@buildhost) (gcc version 4.1.0 20060109 (prerelease) (SUSE Linux)) #1 Thu Jan 26 15:31:56 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002fedc000 (usable)
> BIOS-e820: 000000002fedc000 - 0000000030000000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>766MB LOWMEM available.
>On node 0 totalpages: 196316
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 192220 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:0
>DMI 2.3 present.
>ACPI: RSDP (v000 DELL                                  ) @ 0x000fde50
>ACPI: RSDT (v001 DELL    CPi R   0x27d40301 ASL  0x00000061) @ 0x000fde64
>ACPI: FADT (v001 DELL    CPi R   0x27d40301 ASL  0x00000061) @ 0x000fde90
>ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: local apic disabled
>Allocating PCI resources starting at 40000000 (gap: 30000000:ceda0000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda1 vga=0x305 desktop resume=/dev/hda2
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 797.444 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 772404k/785264k available (1555k kernel code, 12192k reserved, 627k data, 184k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1597.36 BogoMIPS (lpj=3194733)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) III Mobile CPU      1200MHz stepping 01
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2421k freed
> not found!
>ACPI: setting ELCR to 0200 (from 0800)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc00e, last bus=2
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050902
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:00:02.0
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: Power Resource [PADA] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 18 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:01: ioport range 0x800-0x805 could not be reserved
>pnp: 00:01: ioport range 0x808-0x80f could not be reserved
>pnp: 00:02: ioport range 0x806-0x807 has been reserved
>pnp: 00:02: ioport range 0x810-0x85f could not be reserved
>pnp: 00:02: ioport range 0x860-0x87f has been reserved
>pnp: 00:02: ioport range 0x880-0x8bf has been reserved
>pnp: 00:02: ioport range 0x8c0-0x8df has been reserved
>pnp: 00:02: ioport range 0x8e0-0x8ff has been reserved
>pnp: 00:03: ioport range 0xf000-0xf0fe has been reserved
>pnp: 00:03: ioport range 0xf100-0xf1fe has been reserved
>pnp: 00:03: ioport range 0xf200-0xf2fe has been reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0xf500-0xf5fe has been reserved
>pnp: 00:03: ioport range 0xf600-0xf6fe has been reserved
>pnp: 00:03: ioport range 0xf800-0xf8fe has been reserved
>pnp: 00:03: ioport range 0xf900-0xf9fe has been reserved
>pnp: 00:08: ioport range 0x900-0x91f has been reserved
>pnp: 00:08: ioport range 0x3f0-0x3f1 has been reserved
>pnp: 00:0e: ioport range 0xbf40-0xbf5f has been reserved
>pnp: 00:0e: ioport range 0xbf20-0xbf3f has been reserved
>pnp: 00:10: ioport range 0x378-0x37f has been reserved
>pnp: 00:10: ioport range 0x778-0x77b has been reserved
>pnp: 00:11: ioport range 0x7b0-0x7bb has been reserved
>pnp: 00:11: ioport range 0x7c0-0x7df has been reserved
>pnp: 00:11: ioport range 0xbb0-0xbbb has been reserved
>pnp: 00:11: ioport range 0xbc0-0xbdf has been reserved
>pnp: 00:11: ioport range 0xfb0-0xfbb has been reserved
>pnp: 00:11: ioport range 0xfc0-0xfdf has been reserved
>pnp: 00:11: ioport range 0x13b0-0x13bb has been reserved
>pnp: 00:11: ioport range 0x13c0-0x13df has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bus 3, cardbus bridge: 0000:02:01.0
>  IO window: 0000e000-0000e0ff
>  IO window: 0000e400-0000e4ff
>  PREFETCH window: 40000000-41ffffff
>  MEM window: f6000000-f7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: e000-ffff
>  MEM window: f6000000-fdffffff
>  PREFETCH window: 40000000-42ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>    ACPI-0201: *** Warning: Device is not power manageable
>PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1138361268.724:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>vesafb: framebuffer at 0xe0000000, mapped to 0xf0880000, using 832k, total 832k
>vesafb: mode is 1024x768x8, linelength=1024, pages=0
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b46b1, caps: 0x804793/0x0
>serio: Synaptics pass-through port at isa0060/serio1/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>input: PC Speaker as /class/input/input2
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
> LID PBTN PCI0 UAR1 USB0 USB1 USB2 MODM PCIE MPCI 
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 184k freed
>Write protecting the kernel read-only data: 288k
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH3M: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ICH3M: chipset revision 2
>ICH3M: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: FUJITSU MHT2040AT, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: Host Protected Area detected.
>	current capacity is 70673394 sectors (36184 MB)
>	native  capacity is 78140160 sectors (40007 MB)
>hda: Host Protected Area disabled.
>hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>Probing IDE interface ide1...
>Attempting manual resume
>IBM TrackPoint firmware: 0x0b, buttons: 2/3
>input: TPPS/2 IBM TrackPoint as /class/input/input3
>ReiserFS: hda1: found reiserfs format "3.6" with standard journal
>ReiserFS: hda1: using ordered data mode
>ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda1: checking transaction log (hda1)
>ReiserFS: hda1: Using r5 hash to sort names
>Adding 501472k swap on /dev/hda2.  Priority:42 extents:1 across:501472k
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>orinoco 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
>orinoco_cs 0.15rc3 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
>hw_random: RNG not detected
>Linux agpgart interface v0.101 (c) Dave Jones
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>agpgart: Detected an Intel 830M Chipset.
>agpgart: Detected 892K stolen memory.
>agpgart: AGP aperture is 128M @ 0xe0000000
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16-rc1-git3-5-default uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 68009 usecs
>intel8x0: clocking to 48000
>    ACPI-0073: *** Warning: No context for object [dffe4eac]
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:02:00.0: 3Com PCI 3c905C Tornado at f087ac00. Vers LK1.1.19
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:02:01.0 [1028:00c8]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:01.0, mfunc 0x012c1222, devctl 0x64
>Yenta: ISA IRQ mask 0x0498, PCI irq 11
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
>cs: IO port probe 0xe000-0xffff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfdffffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x42ffffff
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x280-0x287 0x370-0x37f
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ReiserFS: hda3: found reiserfs format "3.6" with standard journal
>ReiserFS: hda3: using ordered data mode
>ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda3: checking transaction log (hda3)
>ReiserFS: hda3: Using r5 hash to sort names
>ReiserFS: hda4: found reiserfs format "3.6" with standard journal
>ReiserFS: hda4: using ordered data mode
>ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda4: checking transaction log (hda4)
>ReiserFS: hda4: Using r5 hash to sort names
>hw_random: RNG not detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Lid Switch [LID]
>ACPI: Power Button (CM) [PBTN]
>ACPI: Sleep Button (CM) [SBTN]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Thermal Zone [THM] (60 C)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 17
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>NET: Registered protocol family 15
>Initializing IPsec netlink socket
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>pccard: PCMCIA card inserted into slot 0
>cs: memory probe 0xf6000000-0xfdffffff: excluding 0xf6000000-0xf87fffff 0xfa800000-0xfaffffff
>pcmcia: registering new device pcmcia0.0
>eth1: Hardware identity 0001:0001:0004:0002
>eth1: Station identity  001f:0001:0007:001c
>eth1: Firmware determined as Lucent/Agere 7.28
>eth1: Ad-hoc demo mode supported
>eth1: IEEE standard IBSS ad-hoc mode supported
>eth1: WEP supported, 104-bit key
>eth1: MAC address 00:02:2D:21:E5:4D
>eth1: Station name "HERMES I"
>eth1: ready
>eth1: index 0x01: Vcc 5.0, irq 3, io 0xe100-0xe13f
>pcmcia: Detected deprecated PCMCIA ioctl usage.
>pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
>pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>NET: Unregistered protocol family 15
>eth1: New link status: Disconnected (0002)
>eth1: New link status: Connected (0001)
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present
>NET: Registered protocol family 15
>Initializing IPsec netlink socket
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1235
>xfrm_lookup: newly created bundle is stale
>xfrm_bundle_ok: 1235
>xfrm_lookup: newly created bundle is stale
>xfrm_bundle_ok: 1235
>xfrm_lookup: newly created bundle is stale
>xfrm_bundle_ok: 1235
>xfrm_lookup: newly created bundle is stale
>xfrm_bundle_ok: 1235
>xfrm_lookup: newly created bundle is stale
>xfrm_bundle_ok: 1235
>xfrm_lookup: newly created bundle is stale
>xfrm_lookup bailing out after 11 loops
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>BUG: spinlock bad magic on CPU#0, swapper/0
> lock: e17309a0, .magic: dead4eac, .owner: <none>/-1, .owner_cpu: -1
> [<c01ae935>] _raw_spin_lock+0x18/0xcd
> [<c027c0ca>] xfrm_timer_handler+0x20/0x209
> [<c027c0aa>] xfrm_timer_handler+0x0/0x209
> [<c011f8af>] run_timer_softirq+0x126/0x183
> [<c011c1ce>] __do_softirq+0x35/0x7f
> [<c011c23a>] do_softirq+0x22/0x26
> [<c0104f21>] do_IRQ+0x4b/0x56
> [<c0103afa>] common_interrupt+0x1a/0x20
> [<f0d2f474>] acpi_processor_idle+0x1e1/0x321 [processor]
> [<c0101d31>] cpu_idle+0x38/0x4d
> [<c03245d3>] start_kernel+0x250/0x252
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210
>xfrm_bundle_ok: 1210

Actions: View

Attachments on bug 117749: 54633 | 54650 | 54652 | 59102 | 59285 | 65244 | 65245 | 65248 | 65282 | 65369 | 65417 | 65615 | 66176 | 70394 | 70395 | 86502 | 87491