Attachment 65777 Details for Bug 146815

dmesg output directly after booting

dmesg (text/plain), 18.87 KB, created by Christian Boltz on 2006-01-30 22:33:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Christian Boltz

Created: 2006-01-30 22:33:33 UTC

Size: 18.87 KB

patch

obsolete

>Linux version 2.6.16-rc1-git3-4-default (geeko@buildhost) (gcc version 4.1.0 20060109 (prerelease) (SUSE Linux)) #1 Tue Jan 24 16:43:20 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
> BIOS-e820: 000000003ff70000 - 000000003ff7b000 (ACPI data)
> BIOS-e820: 000000003ff7b000 - 000000003ff80000 (ACPI NVS)
> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>On node 0 totalpages: 262000
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32624 pages, LIFO batch:7
>DMI present.
>ACPI: RSDP (v000 ACER                                  ) @ 0x000f60c0
>ACPI: RSDT (v001 ACER   Cardinal 0x20020919  LTP 0x00000000) @ 0x3ff74c20
>ACPI: FADT (v001 ACER   Cardinal 0x20020919 PTL  0x0000001e) @ 0x3ff7af64
>ACPI: BOOT (v001 ACER   Cardinal 0x20020919  LTP 0x00000001) @ 0x3ff7afd8
>ACPI: DSDT (v001 ACER   Cardinal 0x20020919 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: local apic disabled
>Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda7 vga=0x342 selinux=0 splash=silent resume=/dev/hda2 desktop elevator=as
>bootsplash: silent mode.
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 1593.821 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032928k/1048000k available (1552k kernel code, 14316k reserved, 618k data, 184k init, 130496k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3192.21 BogoMIPS (lpj=6384437)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>mtrr: v2.0 (20020519)
>CPU: Intel(R) Pentium(R) M processor 1600MHz stepping 05
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2498k freed
> not found!
>ACPI: setting ELCR to 0200 (from 0420)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd732, last bus=2
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20050902
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #03 (-#06) may be hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
>PCI: Bus #07 (-#0a) may be hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 11 12) *10
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>burst-mode-ec-10-Aug
>ACPI: Embedded Controller [EC0] (gpe 29)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI: Power Resource [PFN0] (off)
>ACPI: Power Resource [PFN1] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI: Bridge: 0000:00:01.0
>  IO window: 3000-3fff
>  MEM window: d0100000-d01fffff
>  PREFETCH window: d8000000-dfffffff
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 00004000-000040ff
>  IO window: 00004400-000044ff
>  PREFETCH window: 50000000-51ffffff
>  MEM window: 56000000-57ffffff
>PCI: Bus 7, cardbus bridge: 0000:02:06.1
>  IO window: 00004800-000048ff
>  IO window: 00004c00-00004cff
>  PREFETCH window: 52000000-53ffffff
>  MEM window: 58000000-59ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-4fff
>  MEM window: d0200000-d05fffff
>  PREFETCH window: 50000000-53ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Enabling device 0000:02:06.1 (0080 -> 0083)
>ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:02:06.1 to 64
>Simple Boot Flag at 0x37 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1138648479.620:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 11484k, total 65536k
>vesafb: mode is 1400x1050x16, linelength=2800, pages=21
>vesafb: protected mode interface info at c000:54bf
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 128695 bytes,<6>...found (1400x1050, 21637 bytes, v3).
>Console: switching to colour frame buffer device 173x61
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>MDM0 GLAN USB1 USB2 USB3 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 184k freed
>Write protecting the kernel read-only data: 287k
>Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>ICH4: chipset revision 3
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: ST94011A, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 512KiB
>hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
>Probing IDE interface ide1...
>hdc: UJDA740 DVD/CDRW, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Thermal Zone [THRM] (47 C)
>ACPI: Fan [FAN0] (off)
>ACPI: Fan [FAN1] (off)
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>Adding 1052248k swap on /dev/hda2.  Priority:42 extents:1 across:1052248k
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>lp0: using parport0 (interrupt-driven).
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>dm-netlink version 0.0.2 loaded
>Linux agpgart interface v0.101 (c) Dave Jones
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>agpgart: Detected an Intel 855PM Chipset.
>agpgart: AGP aperture is 256M @ 0xe0000000
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 5, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>i8xx TCO timer: initialized (0x1060). heartbeat=30 sec (nowayout=0)
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hw_random hardware driver 1.0.0 loaded
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>usb 2-1: configuration #1 chosen from 1 choice
>intel8x0_measure_ac97_clock: measured 54166 usecs
>intel8x0: clocking to 48000
>b44.c:v0.97 (Nov 30, 2005)
>    ACPI-0201: *** Warning: Device is not power manageable
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>eth0: Broadcom 4400 10/100BaseT Ethernet 00:c0:9f:33:58:45
>ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:02:06.0 [1025:001f]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>ieee1394: Initialized config rom entry `ip1394'
>Yenta: ISA IRQ mask 0x0818, PCI irq 10
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
>cs: IO port probe 0x4000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:02:06.1 [1025:001f]
>ieee80211_crypt: module not supported by Novell, setting U taint flag.
>ieee80211_crypt: registered algorithm 'NULL'
>Yenta: ISA IRQ mask 0x0818, PCI irq 10
>Socket status: 30000410
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
>cs: IO port probe 0x4000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd05fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>ieee80211: module not supported by Novell, setting U taint flag.
>ieee80211: 802.11 data/management/control stack, git-1.1.7
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[d0209000-d02097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 1.1.4
>ipw2100: Copyright(c) 2003-2005 Intel Corporation
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
>pccard: PCMCIA card inserted into slot 1
>usbcore: registered new driver hiddev
>input: Logitech USB Receiver as /class/input/input3
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1
>cs: memory probe 0xd0200000-0xd05fffff: excluding 0xd0200000-0xd023ffff
>pcmcia: registering new device pcmcia1.0
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f0000140458]
>Badness in vsnprintf at lib/vsprintf.c:279
> [<c01ad2a3>] vsnprintf+0x41/0x45a
> [<c01ad731>] snprintf+0x1c/0x1f
> [<c021520e>] print_modalias_bits+0x58/0x6d
> [<c0215289>] print_modalias+0x66/0x138
> [<c0215dac>] input_dev_uevent+0x31d/0x340
> [<c0215a8f>] input_dev_uevent+0x0/0x340
> [<c020b912>] class_uevent+0x155/0x15e
> [<c020b7bd>] class_uevent+0x0/0x15e
> [<c01ab222>] kobject_uevent+0x1be/0x390
> [<c020bea5>] class_device_add+0x1cc/0x279
> [<c02165a0>] input_register_device+0x128/0x25b
> [<f9912fc9>] hidinput_connect+0x1b2a/0x1b34 [usbhid]
> [<f990fe3d>] hid_probe+0xb3c/0xce7 [usbhid]
> [<c0115914>] try_to_wake_up+0xf0/0xfa
> [<c014c7fa>] cache_alloc_refill+0x1c8/0x4f0
> [<c020b314>] __driver_attach+0x0/0x8b
> [<f97acd16>] usb_probe_interface+0x58/0x86 [usbcore]
> [<c020b261>] driver_probe_device+0x42/0x8b
> [<c020b377>] __driver_attach+0x63/0x8b
> [<c020ad60>] bus_for_each_dev+0x39/0x5b
> [<c020b1c5>] driver_attach+0x11/0x13
> [<c020b314>] __driver_attach+0x0/0x8b
> [<c020aa68>] bus_add_driver+0x64/0xfd
> [<f97acbf7>] usb_register_driver+0x73/0xd0 [usbcore]
> [<f991c01b>] hid_init+0x1b/0x3d [usbhid]
> [<c012d8b6>] sys_init_module+0x13d8/0x156a
> [<c013987c>] __alloc_pages+0x67/0x295
> [<c013ff40>] __handle_mm_fault+0x777/0x78c
> [<c0142dca>] do_mmap_pgoff+0x4fc/0x65d
> [<c014f800>] vfs_write+0x107/0x146
> [<c014fcb0>] sys_write+0x3c/0x63
> [<c0102a3b>] sysenter_past_esp+0x54/0x79
>input: Logitech USB Receiver as /class/input/input4
>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>loop: loaded (max 8 devices)
>SubDomain: SubDomain (version 2.0-18.43r6110) initialized
>audit(1138648506.571:2): SubDomain (version 2.0-18.43r6110) initialized
>
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>x_tables: module not supported by Novell, setting U taint flag.
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8187 buckets, 65496 max) - 232 bytes per conntrack
>xt_state: module not supported by Novell, setting U taint flag.
>xt_tcpudp: module not supported by Novell, setting U taint flag.
>xt_limit: module not supported by Novell, setting U taint flag.
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Battery Slot [BAT2] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Sleep Button (CM) [SLPB]
>ADDRCONF(NETDEV_UP): kabel: link is not ready
>b44: kabel: Link is up at 100 Mbps, full duplex.
>b44: kabel: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): kabel: link becomes ready
>audit(1138648531.737:3): audit_backlog_limit=256 old=64 by auid=4294967295
>pcmcia: Detected deprecated PCMCIA ioctl usage.
>pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
>pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
>NET: Registered protocol family 17
>slamr: module not supported by Novell, setting U taint flag.
>slamr: module license 'Smart Link Ltd.' taints kernel.
>slamr: falsely claims to have parameter debug
>slusb: module not supported by Novell, setting U taint flag.
>slusb: Unknown symbol usb_register_driver
>slusb: Unknown symbol usb_deregister
>kabel: no IPv6 routers present

Actions: View

Attachments on bug 146815: 65777